EU DECLARATION OF CONFORMITY

Similar documents
OMRON SCIENTIFIC TECHNOLOGIES INCORPORATED ECDeclaration ofconformity

EU DECLARATION OF CONFORMITY. 3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

ZERTI ~CERTIFICAJE. Certificate holder. Product tested. Manufacturer. Type designation. Codes and standards forming the basis of testing

Safety Design EN ISO and Safety Performance Levels

CM Series. Safety, Technology & Innovation. Description. Approvals. Operation. Applications. Certificate of Conformity

MA Series. Safety, Technology & Innovation MA 12 MA 13. Description. Approvals. Operation. Applications. Declaration Conformity

Temperature Control Library

EC Declaration of Conformity

OMRON Scientific Technologies Inc. Mr. Doug Barnett 6550 Dumbarton Circle Fremont, CA United States of America

Single Source for Machine & Process Safeguarding Solutions

COMPLETE PACKAGING SOLUTION

RFID Non-contact switches are designed to monitor hinged, sliding or removable guard doors. RFID technology provides increased tamper resistance.

EU DECLARATION OF CONFORMITY

Sensing for standard and special applications

Motor Condition Monitoring Devices K6CM series

Bringing IoT innovation to the plant floor IO-Link series

Packaging Machine Library offers solution!

Switch Mode Power Supplies

Products designed for extreme washdown environments IP69K Products

Oil-Resistant IP67G Sensors

Safety. Detection. Control. SAFETY INTERFACES. Safety Interfaces and Relays. Product catalogue. Issue 1

Reliable Detection of Transparent Objects

OMRON SCIENTIFIC TECHNOLOGIES INCORPORATED

Certificate of Compliance

Certification Supplement Manual

SAFETY INTERFACES SAFETY INTERFACES AND RELAYS

Selection Guide. Logic: From basic to programmable network controllers» Safety Components. Output: Safety relays, servo systems, and inverters

Operating instructions Safety-monitoring module SRB 302X3. 1. About this document. Content

Hands On: Introduction to Safety Workshop Presented by Robert Jones Manufacturing in America March 14-15, 2018

Operating instructions Safety-monitoring module SRB 302X3. 1 About this document

Automation, Software und Informationstechnologie

HYUNDAI HEAVY INDUSTRIES CO., LTD.

EU Declaration of Conformity

Certification Supplement Manual

MS 4800 Series, consisting of Transmitter system, Receiver system with/without RM6 Resource Module for Muting Applications

Safety Control Modules for Emergency Stop Circuits FF-SRS5988 FF-SRS5935 FF-SRS5925 FF-SRS5934 FF-SRS5924 TYPICAL APPLICATIONS APPROVALS DIMENSIONS

Power Supply Display Module PSDM. Installation and Operation Manual

Engineering Guideline. pac- Carriers Type Universal

File E Project 97SC January 21, 1998 REPORT

Sensing light curtain as per DIN 18650/EN 16005

UL TEST REPORT AND PROCEDURE

MACHINERY SAFEBOOK 5. Safety related control systems for machinery. Principles, standards and implementation. (Revision 5 of the Safebook series)

Operating Instructions for Limit switch Model: NBK-R NBK-RM NBK-RT NBK-RA

P R O D U C T D ATA S H E E T

Certificate of Compliance

Certificate of Compliance

SAFEMASTER PRO. The configurable safety system versatile and extendable. Our experience. Your safety.

We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express

Sensing light curtain as per DIN 18650/EN 16005

FF-SR Series. FF-SR25933 Two-hand Safety Control Module FF-SR25933

Technical Data. General specifications. Rated operating distance s n 5 mm

Declaration of conformity - Safety relays 14:2. Declaration of conformity - JSBR4 14:3. Declaration of conformity - Vital 1 14:4

ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P

Machine Guarding and Safety

Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) Protected area width (range) 0...

Certificate of Compliance

E3NX-MA. Smart Fiber Amplifier Units. Downsize control panels using the Omron dualchannel. Ordering Information

UL TEST REPORT AND PROCEDURE

Test Report. Appliance EMF Testing

P R O D U C T D ATA S H E E T

SAFETY STANDARDS & SOLUTIONS MATERIAL HANDLING & INTRALOGISTICS

Operating Instructions

Regulated Ex-Heater HEX with internal controller, HEX with external controller II 3 G II 3 D

REVISION HISTORY Rev Description Author. Approved by Date A Initial release per ECO Dean King Dean King November 16, 2012

ISIS SAFETY SYSTEM Installation guide

Report No EC. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS ATEX CERTIFICATION REPORT. Electronstandart-pribor

Introduction to machine safety

SAFETY RELAY APPLICATION

Technical Data. Dimensions

UL TEST REPORT AND PROCEDURE

SITRANS. Temperature transmitter Functional safety for SITRANS TW. Introduction. General safety instructions 2. Device-specific safety instructions

FACTORY AUTOMATION. Instruction Manual NBB20-L2-E2B-C-V1 NBN40-L2-E2B-C-V1 Inductive Sensor

SensaGuard TM Integrated Latch Installation Instructions

Inductive slot sensor

EU-Type Examination Certificate

Technical Data. General specifications Switching element function Rated operating distance s n 8 mm

Manual Power relay SR853

SECTION ULTRASONIC TRANSIT TIME CLAMP-ON FLOW MEASURING SYSTEM

Plug-in Base, Long Range Sensor E3B2

Certificate of Compliance

Certificate of Compliance

Functional Safety Manual June pointek CLS500/LC500

Certificate of Compliance

EU Declaration of Conformity EMC Directive 2014/30/EU, ATEX Directive 2014/34/EU, PED Directive 2014/68/EU No: MMI SE

Certificate of Compliance

Technical Data. Dimensions

Operating Manual MS220KA and MSR220KA

SLC 220 E/R RFBS

Engineering Guideline. pac-carriers Type for TRICON system TRICONEX TMR PLC

Retroreflective sensor with polarization filter

/ / 2018

Instruction Manual. CAT 100 & CAT 200 Continuous Analyzer Transmitter Addendum for Hazardous Area Applications. 3 rd Edition 05/2007

LINETRAXX VME420. Multi-functional relay for overvoltage, undervoltage and frequency monitoring in AC/DC systems with external supply voltage

Safety Speed Monitoring

Technical Data. General specifications Switching element function Rated operating distance s n 5 mm

SmartPower Solutions. Quick Start Guide , Rev CA March 2015

Photoelectric laser sensors E3C-LDA SERIES. l o n g - d i s t a n c e, a d j u s t a b l e l a s e r b e a m. Advanced Industrial Automation

Certificate of Compliance

CE MARKING PROCESS & NOTIFIED BODIES

SENSOR SOLUTIONS FOR DOORS

Transcription:

No. DECL-000015 Rev. D om Ron EU DECLARATION OF CONFORMITY 1. Product Models/Products: RM Series. Resource Modules: Models RM-1. RM-2. RM-2AC. RM-2AC-IP. RM-2AC-IP-SB1. RM-2AC-IP-SBK. and RM-X 2. Name and address of the manufacturer: OMRON Scientific Technologies Incorporated 6550 Dumbarton Circle. Fremont. CA 94555-3605. U.S.A 3. This Declaration of Conformity is issued under the sole responsibility of the manufacturer. 4. Objects of the declaration: Relay Output Extension Devices. Safety Relays. Intended application: Safeguarding of machines and other hazardous areas. The Resource Modules in combination with a suitable control device fulfill the following requirements of the relevant standards and can thus be used in applications up to these safety levels: Type 4 ace. ENIIEC 61496-1. SIL CL 3 I SIL3 ace. to IEC 62061 I IEC 61508, Cat. 4 I PL e ace. to EN ISO 13849-1 5. The objects of the declaration described above are in conformity with the relevant Union harmonization legislation: Machinery Directive 20061421EC. EMC Directive 20141301EU 6. References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared: Machinery Directive: EN 61496-1 :2012+Corr.1:2015. EN 62061:2015+AC:2015. ISO 13849-1:2015. EN 50178:1997. IEC 61508, Parts 1-7:2010 7. Name, address, and identification number of Notified Body, Number of EC Type Examination Machinery Directive: Notified body: TUV Rheinland lndustrie Service GmbH Address: Am Grauen Stein. 51101 Koln I Germany Notified Body identification No.:0035 Certificate for EU Type Examination: Registration No. : 9681EL 271.03117 112

No. DECL-0000 15 Rev. D Signed and on behalf of: OM RON Scientific Technologies Incorporated ;., (.vh 1.>-o r1. Place of issue: Fremont. CA. 94555, USA Date of issue: ("" { Signature: r:::~s[df Name: Vanessa Chen 6g..vv Function: Quality Manager. OM RON Scientific Technologies Incorporated Name and address of contact in EU OMRON Europe B.V. Quality & Environment Department Attn: J.J.P.W. Vogelaar. European Quality & Environment Manager Zilverenberg 2. 5234 GM. 's-hertogenbosch. The Netherlands 2/2

Certificate No.: 968/EL 271.03/17 Product tested Relay Output Extension Devices Certificate holder OMRON Scientific Technologies, Inc. 6550 Dumbarton Circle Fremont, CA 94555-3605 USA Type designation Resource Modules: RM-1, RM-2, RM-2AC, RM-2AC-IP, RM-2AC-IP-SB1, RM-2AC-IP-SBK and RM-X Codes and standards IEC 61496-1 :2012 + Corr. 1:2015 IEC 62061:2015 + AC:2015 ISO 13849-1 :2015 EN 50178:1997 IEC 61508 Parts 1-7:2010 l c. (\).g c. ~ s ~ c 0 ~ c. c. (\) 1? (\) c.q ~ 5 Intended application Specific requirements Valid until 2022-06-21 Safeguarding of machines and other hazardous areas. The Resource Modules in combination with a suitable control device fulfill the following requirements of the relevant standards and can thus be used in applications up to these safety levels: Type 4 ace. ENI IEC 61496-1, SIL CL 3 I SIL3 ace. to IEC 62061 I IEC 61508, Cat. 4 I PL e ace. to EN ISO 13849-1 The instructions of the associated Installation and Operating Manual shall be considered. The issue of this certificate is based upon an examination, whose results are documented in Report No. 968/EL 271.03/17 dated 2017-06-21. This certificate is valid only for products which are identical with the product tested. It becomes invalid at any change of the codes and standards forming the basis of testing for the intended application. Koln, 2017-06-21 T V Rheinland lndustrie Service GmbH Bereich Automa on Funktionale Sicherheit Am G a e S e 5'105 Kolr Dipl.-lng. Stephan Hab www. fs-prod ucts. com www.tuv.com (( DAk~~sc h e Akkreditierun gsste lle D ZE ll052 02 00 A TUVRhein land Preci se ly Rig ht.

No. DECL-000148 Rev. A om Ron sti EU DECLARATION OF CONFORMITY 1. Product Models/Products: Safety Light Curtain System, Combination of F3SG-BK safety light curtain series with the RM-2AC-IP-SBK resource module 2. Name and address of the manufacturer: OM RON Scientific Technologies Incorporated 6550 Dumbarton Circle. Fremont. CA 94555-3605, U.S.A 3. This Declaration of Conformity is issued under the sole responsibility of the manufacturer. 4. Objects of the declaration: Safety Light Curtain System. Safeguarding of machines and other hazardous areas. The Safety Light Curtain System fulfils the requirements of the relevant standards (Type 4 ace. IEC 61496-1 /-2, SIL 3 ace. IEC 61508, Cat. 4 I PL e ace. to ISO 13849-1 ) and can be used in applications up to these safety levels. 5. The objects of the declaration described above are in conformity with the relevant Union harmonization legislation: Machinery Directive 2006/42/EC, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EC 6. References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared: IEC 61496-1:2012 + Corr. 1:2015, IEC 61496-2:2013, IEC 61508 Parts 1-7:2010, ISO 13849-1:2015. EN 50178:1997 7. Name, address, and identification number of Notified Body, Number of EC Type Examination Machinery Directive: Notified body: TUV Rheinland lndustrie Service GmbH Address: Alboinstr. 56, 12103 Berlin/Germany Notified Body identification No. :0035 Certificate for EU Type Examination: Registration No. : 01/205/5620.00/17 112

No. DECL-000148 Rev. A Signed and on behalf of: OMRON Scientific Technologies Incorporated Place of issue: Fremont, CA, 94555, USA Signature: l/~ r 0? ~ I ;/? Name: Hank Liu Date of issue: ( D_/_I_I_/_Y" Function: Quality Representative and Authorized Signatory, OM RON Scientific Technologies Incorporated Name and address of contact in EU OMRON Europe B.V. Quality & Environment Department Attn: J.J.P.W. Vogelaar. European Quality & Environment Manager Zi lverenberg 2. 5234 GM. 's-hertogenbosch. The Netherlands 2/2

EC Type-Examination Certificate 1!1 ~~ 1fi 1!1 ~ iii~ Reg.-No.: 01/205/5620.00/17 Product tested Safety Light Curtain System, Active Opto-electronic Protective Device (AOPD Type 4) Certificate holder OMRON Scientific Technologies, Inc. 6550 Dumbarton Circle Fremont, CA 94555-3605 USA Type designation Combination of F3SG-BK safety light curtain series with the RM-2AC-IP-SBK resource module Codes and standards IEC 61496-1:2012 + Corr. 1:2015 IEC 61496-2:2013 IEC 61508 Parts 1-7:2010 ISO 13849-1:2015 EN 50178:1997 Intended application Specific requirements Safeguarding of machines and other hazardous areas. The Safety Light Curtain System fulfils the requirements of the relevant standards (Type 4 ace. IEC 61496-1 /-2, SIL 3 ace. IEC 61508, Cat. 4 I PL e ace. to ISO 13849-1) and can be used in applications up to these safety levels. The instructions of the associated Installation and Operating Manual shall be considered. It is confirmed that the product under test complies with the requirements for machines defined in Annex I of the EC Directive 2006/42/EC. Valid until 2022-09-27 Berlin, 2017-09-27 Dipl.-lng. Eberhard Frejno www. fs-products. com www.tuv.com A_ TUVRheinland Precisely Right.

2017-09-27 Annex to Report-No.: 968/FSP 1497.00/17 Summary of the characteristic data for use of the product in safety-related applications Product: Safety light curtain system (AOPD Type 4) Type: Company: Combination of F3SG-BK safety light curtain series with the RM-2AC-IP-SBK Resource module OMRON Scientific Technologies, Inc. 1. Characteristic data acc. to IEC 61508-1 till -7: 1.1 Data for use of the product as a subsystem *) in safety functions Value Remark Safety Integrity Level SIL 3 PFH 8.5 E-09 1/h 8.5 % of SIL 3 2. Characteristic data acc. to EN ISO 13849-1: Value Classification Performance Level PL e Category Cat. 4 MTTF d 211 a HIGH Diagnostic Coverage DC 98.5% HIGH *) Subsystem elements can be used to create redundant architectures in subsystems; within a safety function subsystems are always connected in series (definitions see IEC 62061:2005 and IEC 61508-4 Ed. 2:2010). Besides these summary of the characteristic data always the information provided in the product documents of the manufacturer have to be considered. Source of failure rate data: SN 29500, so far no data from the component manufacturer were available. Max. average ambient temperature: 40 C General assumption that 50 % of the component failures are dangerous failures (λ d = 0.5 λ, MTTF d = 2 x MTTF), so far no further information was available. TÜV Rheinland Industrie Service GmbH Version: 08.2012 A-FS, BU FS Products Am Grauen Stein, 51105 Köln

6/7/2017 NIPF.E206571 Active Opto electronic Protective Devices NIPF.E206571 Active Opto electronic Protective Devices Page Bottom Active Opto electronic Protective Devices See General Information for Active Opto electronic Protective Devices OMRON SCIENTIFIC TECHNOLOGIES INC 6550 Dumbarton Cir Fremont, CA 94555 3605 USA E206571 Type 2, light curtain system, MiniProtect Series MP2100+; Model MP21 followed by suffixes to indicate coverage height and configuration options. Type 4, light curtain: Model Series 4600+; Models MS46, OF46 followed by additional suffixes, may include modules RM 1, RM 2, RM 3 or RM 4. Type 4, light curtain system: Series 4700+; Model MC47, MS47, MCF47, MCJ47 or MS46 followed by S, R, SR, SRS or TB, followed by 12, 20 or 30, followed by xxxx, followed by LCM1, LCM2 or LCM3 or LCMxxx, followed by 3X, 10X or 30X, followed by 3R, 10R or 3. Type 4, light curtain system consisting of Transmitter and Receiver, Series PA46+, 1 000, 2 500, 2 600, 3 400, 3 500, 4 300, 5 300 or 6 300, may be followed by Q2, followed by NO1, NO2, NC1 or NC2, followed by NP or PN, may be followed by M. Type 4, light curtain system consisting of single light stick containing Transmitter and Receiver, and a passive stick containing reflective mirrors, Series PA46 BB 2+, followed by 500 or 600. Type 4 Light Curtain system consisting of Transmitter and Receiver, 4800+ Series, Model MS or MSF followed by 4800, followed by A, B or S, may be followed by additional numbers and/or letters, may include RM6 Mute Module and PDM (Programmable Diagnostic Module). + Also investigated to UL 1998, the Standard for Safety Related Software. Trademark and/or Tradename:, Last Updated on 2011 02 03 Questions? Print this page Terms of Use Page Top 2017 UL LLC The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a nonmisleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2017 UL LLC". http://database.ul.com/cgi bin/xyv/template/lisext/1frame/showpage.html?name=nipf.e206571&ccnshorttitle=active+opto electronic+protective+device 1/1

6/7/2017 NIPF7.E206571 Active Opto electronic Protective Devices Certified for Canada NIPF7.E206571 Active Opto electronic Protective Devices Certified for Canada Page Bottom Active Opto electronic Protective Devices Certified for Canada See General Information for Active Opto electronic Protective Devices Certified for Canada OMRON SCIENTIFIC TECHNOLOGIES INC 6550 Dumbarton Cir Fremont, CA 94555 3605 USA E206571 Type 2, light curtain system, MiniProtect Series MP2100+; Model MP21 followed by suffixes to indicate coverage height and configuration options. Type 4, light curtain system: Model Series 4600+; Models MS46, OF46 followed by additional suffixes, may include modules RM 1, RM 2, RM 3 or RM 4. Type 4, light curtain system: Series 4700+; Model MC47, MS47, MCF47, MCJ47 or MS46 followed by S, R, SR, SRS or TB, followed by 12, 20 or 30, followed by xxxx, followed by LCM1, LCM2 or LCM3 or LCMxxx, followed by 3X, 10X or 30X, followed by 3R, 10R or 3. Type 4, light curtain system consisting of Transmitter and Receiver, Series PA46+, 1 000, 2 500, 2 600, 3 400, 3 500, 4 300, 5 300 or 6 300, may be followed by Q2, followed by NO1, NO2, NC1 or NC2, followed by NP or PN, may be followed by M. Type 4, light curtain system consisting of single light stick containing Transmitter and Receiver, and a passive stick containing reflective mirrors, Series PA46 BB 2+, followed by 500 or 600. Type 4 Light Curtain system consisting of Transmitter and Receiver, 4800+ Series, Model MS or MSF, followed by 4800, followed by A, B or S, may be followed by additional numbers and/or letters, may include RM6 Mute Module and PDM (Programmable Diagnostic Module). + Also complies with UL 1998, the Standard for Safety Related Software. Trademark and/or Tradename:, Last Updated on 2011 02 03 Questions? Print this page Terms of Use Page Top 2017 UL LLC The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a nonmisleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2017 UL LLC". http://database.ul.com/cgi bin/xyv/template/lisext/1frame/showpage.html?name=nipf7.e206571&ccnshorttitle=active+opto electronic+protective+devic 1/1

Here are the links to the following OSTI UL Files: NIPF.E206571 - Active Opto-electronic Protective Devices NIPF7.E206571 - Active Opto-electronic Protective Devices Certified for Canada Put the cursor on the (underlined & highlighted in blue), press Ctrl, then Click. This will bring you to UL s Online Directory for that UL File OMRON SCIENTIFIC TECHNOLOGIES INC OMRON SCIENTIFIC TECHNOLOGIES INC Active Opto-electronic Protective Devices Active Opto-electronic Protective Devices Certified for Canada NIPF.E206571 NIPF7.E206571 See General Information for Active Opto-electronic Protective Devices See General Information for Active Opto-electronic Protective Devices Certified for Canada

Certificate of Compliance Certificate: 1236374 Master Contract: 156365(LR 90200) Project: 70137016 Date Issued: 2017-05-17 Issued to: OMRON Scientific Technologies Inc 6550 Dumbarton Cir Fremont, California 94555-3605 USA The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Issued by: Sam Lem Sam Lem, P. Eng. PRODUCTS CLASS - C321107 - INDUSTRIAL CONTROL EQUIPMENT-Miscellaneous Apparatus CLASS - C321187 - INDUSTRIAL CONTROL EQUIPMENT-Miscellaneous Apparatus - Certified to US Standards Relay Modules, Model RM-1, RM-2, RM-3 (or XPSLCM1150), RM-4 (or XPSLCD1141), RM-X and RM-2AC, DIN-rail mount, RM-1 rated 24 V dc, 0.108 A, 2.6 VA; RM-2 rated 24 V dc, 0.792 A, 19 VA; RM-X rated Input 24 V dc, 72 ma, output contacts 150 V ac, 7 A, or 24 V ac/dc 7 A res/ 2 A ind.; RM-3 & RM-4 rated Input 24 V dc, output contacts 24 V dc, 625 ma, RM-2AC rated Input 100-240 Vac, 47-63 Hz, 0.8/0.4 A, output contacts 250 V ac, 6 A, 24 V dc, 6 A res. or 2 A ind. and 250 Vac, 3 A; RM-2AC-IP, RM-2AC-IP-SB1, and RM- 2AC-IP-SBK, rated Input 100-240 Vac, 47-63 Hz, 0.8/0.4 A. Notes: 1. Except for models RM-2AC, RM-2AC-IP, RM-2AC-IP-SB1, and RM-2AC-IP-SBK, the above products are supplied by external power supplies which are not part of this certification. The power supplies are Class 2, ELV (less than 100 VA and 42.4 V pk). 2. The above products are certified as components. The suitability of the combination of the components and their enclosure are to be determined in the end use application. 3. The above products are for use with OSTI's Presence Sensing light curtain devices, 4600 (or XUSLT) Series, 4700 Series, OS3100 and BeamSafeII. DQD 507 Rev. 2012-05-22 Page 1

Certificate: 1236374 Project: 70137016 Master Contract: 156365 (LR 90200) Date Issued: 2017-05-17 4. Models RM-2AC-IP, RM-2AC-IP-SB1 and RM-2AC-IP-SBK were evaluated at an ambient of 55 C. 5. The RM-2AC-IP Relay Module is for use with OSTI's Presence Sensing light curtain devices, MS4600, PA4600, OS3100, MS4800 and F3SJ. 6. The RM-2AC-IP-SB1 Relay Module is for use with OSTI's Presence Sensing light curtain device 4800 Series models MS4800S and MSF4800S (dip switch version) for "manual key switch remote control" (enabling the programming mode and start/re-start functions). 7. The above models are evaluated for electrical safety only. 8. The RM-2AC-IP-SBK Relay Module is for use with OSTI s Presence Sensing light curtain device F3SG- BK Series for manual key switch remote control (enabling the programming mode and start/re-start functions). APPLICABLE REQUIREMENTS CAN/CSA-C22.2 No 14 (12 th Edition) UL 508 (17 th Edition) - Industrial Control Equipment - Industrial Control Equipment DQD 507 Rev. 2012-05-22 Page 2

Supplement to Certificate of Compliance Certificate: 1236374 (090200_0_000) Master Contract: 156365 (LR 90200) The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate. Project Date Description Product Certification History 70137016 2017-05-17 Evaluation for update to report 1236374, to include model RM-2AC-IP-SBK. 70041147 2015-09-30 Update Report 1236374 to correct class 3211-07 / 3211-87 2348719 2010-09-22 Update to include alternate construction. 2145173 2009-02-26 Update Report 1236374 to include new model RM-2AC-IP-SB1. 1945015 2007-09-04 Update report to amend fuse part number. 1901670 2007-06-06 Update Report 1236374 to Include Model RM-2AC-IP. 1881509 2007-02-16 Update Report 1236374 to Include Company Name Change. 1510392 2004-03-29 Update to Report 1236374 to Include Relay Resource Module RM-2AC (C/US) 1538361 2004-03-29 Update to include alternative power supply in RM-2AC. History 1369178 2002-10-18 Addition of Note 3 to page 1 of the report and addition of alternative model names for RM-3 and RM-4. 1236374 2001-09-12 Original Certification. (Re-issued Report LR 90200-34 as Report 1236374 and included new Models RM-X, RM-3, RM-4.) DQD 507 Rev. 2012-05-22 Page 1

Certificate of Compliance Certificate: 1289466 (LR 90200) Master Contract: 156365 Project: 70041146 Date Issued: 2015-09-30 Issued to: OMRON Scientific Technologies Inc 6550 Dumbarton Cir Fremont, California 94555-3605 USA The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Issued by: Dan Petrulian Dan Petrulian. PRODUCTS CLASS - C321107 - INDUSTRIAL CONTROL EQUIPMENT-Miscellaneous Apparatus CLASS - C321187 - INDUSTRIAL CONTROL EQUIPMENT-Miscellaneous Apparatus - Certified to US Standards PART A: Optical Sensor, 'Microsafe', MC4200D and MC4200E; 'Microsafe Flexible', MCF4200D and MCF4200E Series, 'Minisafe', MS4500D and MS4500E Series and 'Perimeter Access', PA4500D and PA4500E Series, rated 115/230 V ac, 500/250 ma, 50/60 Hz, or 24 V dc, 30 VA power consumption. PART B: Safety Light Curtain Controller, Model MC42E-DN, rated 24 V dc, 30 VA max, suitable for use with 1 set of light curtains as indicated above. PART C: Safety Light Curtain System, series 4700, consisting of ELV light curtains, models MC (or XUSLM) /MCF (or XUSLMS)/MCJ/MCA/MS4700 (or MS46TB) and controllers Models LCM-XXX, 85-250 V ac, 50/60 Hz, 25 VA, and LCM-X (or XPSLCB1141), 24 V dc, 0.625A. PART D: Safety Light Curtain System, series 4600, consisting of ELV light curtains, models MiniSafe MS4600 or OptoFence OF4600 and previously certified controllers Models RM1, RM2, RM3, RM4, RMX and RM2AC. Input 24 V dc/ 14 W; Output 2 x 24 V dc/500 ma. DQD 507 Rev. 2012-05-22 Page 1

Certificate: 1289466 Project: 70041146 Master Contract: 156365 Date Issued: 2015-09-30 PART E: Safety Light Curtain System, series MP2100, consisting of an ELV receiver assembly and an ELV transmitter assembly, models MiniProtect MP2100. Input 24 V dc, 3.5 W; Output 2 x 24 V dc, 500 ma. PART F: Safety Light Curtain System, MiniSafe 4800 Series, models MS4800 or MSF4800, Input rating: Transmitter, 24 V dc +/-20%, 285mA, Receiver, 24 V dc +/-20%, 1.8A. Notes: 1. Suffixes are used with light curtain model names in PARTS C, D, E, and F to indicate resolution, protection height and other minor options. 2. Controllers Models MC42E-DN and LCM-X are components that are supplied by a Class 2, ELV (less than 100 VA and 42.4 V pk) power supplies. 3. Controllers RM1, RM2, RM3, RM4, RMX and RM2AC are Relay Modules certified in Report No. 1236374. Except for model RM2AC which has its own power supply, the other relay modules are supplied by external, Class 2, ELV (less than 100 VA and 42.4 V pk) power supplies, which are not part of this certification. 4. Model MiniProtect MP2100 may be used with Relay Modules RM1, RM2, RM3, RM4, RMX or RM2AC. 5. MiniSafe 4800 Series consists of an ELV receiver and ELV transmitter assembly, which are powered by an external certified Class 2 power source. MiniSafe 4800 Series may include a remote PDM (Programmable Diagnostic Module) and may be used with Controllers (Machine Control Circuit devices) RM1, RM3, RM2AC or the RM6 Mute Module. The PDM and RM6 Mute Module are ELV accessories to be used only with the MiniSafe 4800 Series. 6. The above certifications are for Electrical Safety only. APPLICABLE REQUIREMENTS CAN/CSA-C22.2 No 14 (12 th Edition)- UL 508 (17 th Edition) Industrial Control Equipment Industrial Control Equipment DQD 507 Rev. 2012-05-22 Page 2

Supplement to Certificate of Compliance Certificate: 1289466 Master Contract: 156365 The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate. Project Date Description Product Certification History 70041146 2015-09-30 Update Report 1289466 to correct class 3211-07 / 3211-87. 1881510 2007-02-16 Update Report 1289466 to Include Company Name Change. 1857479 2007-01-18 Update report 1289466 to include MS4800 Series. 1703585 2005-10-13 Update report 1289466 to include model MP2100. 1550757 2004-05-14 Update to Report 1289466 to Include Light Curtains, Series 4600 (Electrical Safety Only) History 1437005 2003-05-06 Update TO Report 1289466 to include alternative transformer to models in PART A. 1371690 2002-10-22 Update to Report 1289466 to include alternative model names. 1331412 2002-06-17 Update to Report 1289466 to include alternative model names for light curtains, MS46TB, XUSLMP and XUSLMSP. 1289466 2002-05-23 Original Certification. (Reissue Report LR 90200-10 and update to include 4700 Series, Models LCM-XXX, LCM-X, MC/MCF/MCJ4700-12, -14, -20, -30. DQD 507 Rev. 2012-05-22 Page 1

OMRON AUTOMATION AND SAFETY THE AMERICAS HEADQUARTERS Chicago, IL USA 847.843.7900 800.556.6766 www.omron247.com OMRON CANADA, INC. HEAD OFFICE Toronto, ON, Canada 416.286.6465 866.986.6766 www.omron247.com OMRON ELECTRONICS DE MEXICO HEAD OFFICE México DF 52.55.59.01.43.00 01-800-226-6766 mela@omron.com OMRON ELECTRONICS DE MEXICO SALES OFFICE Apodaca, N.L. 52.81.11.56.99.20 01-800-226-6766 mela@omron.com OMRON ARGENTINA SALES OFFICE Cono Sur 54.11.4783.5300 OMRON CHILE SALES OFFICE Santiago 56.9.9917.3920 OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA HEAD OFFICE São Paulo, SP, Brasil 55.11.2101.6300 www.omron.com.br OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. +31 (0) 23 568 13 00 www.industrial.omron.eu Authorized Distributor: Automation Control Systems Machine Automation Controllers (MAC) Programmable Controllers (PLC) Operator interfaces (HMI) Distributed I/O Software Drives & Motion Controls Servo & AC Drives Motion Controllers & Encoders Temperature & Process Controllers Single and Multi-loop Controllers Sensors & Vision Proximity Sensors Photoelectric Sensors Fiber-Optic Sensors Amplified Photomicrosensors Measurement Sensors Ultrasonic Sensors Vision Sensors Industrial Components RFID/Code Readers Relays Pushbuttons & Indicators Limit and Basic Switches Timers Counters Metering Devices Power Supplies Safety Laser Scanners Safety Mats Edges and Bumpers Programmable Safety Controllers Light Curtains Safety Relays Safety Interlock Switches J89I-E-01 11/14 Note: Specifications are subject to change. 2014 Omron Electronics LLC Printed in U.S.A. Printed on recycled paper.