Multi-Mode Annunciators

Similar documents
Accessories DESK TOP CONTROLS MODELS SPECIFICATIONS MODELS SPECIFICATIONS UNDER DESK TOP MOUNTING MINI DESK TOP CONSOLE

Accessories. Desk Top Controls

Accessories. Desk Controls. Break Glass Emergency Door Release SECURITY DOOR CONTROLS

INSTALLATION INSTRUCTIONS EA SERIES DOOR PROP/EXIT ALARM

Delayed Egress System DORMA EMDE

Accessories. Desk Controls. Break Glass Emergency Door Release SECURITY DOOR CONTROLS

INSTALLATION INSTRUCTIONS 101-DE/101-KDE

Exit Check Integrated Delayed Egress Locks

Exit Switches 410 & 420 SERIES MODELS SPECIFICATIONS HOW TO ORDER 1 SPECIFY MODEL 2 SPECIFY FINISHES 3 SPECIFY OPTIONS

Egress Devices for Code Compliant Access-Controlled Egress Doors

Delayed Egress Locks 38 SECURITY DOOR CONTROLS

Code Compliance. Selected Exit Check models are available to comply with one or more codes listed below. See Operation on page 3.

Exit Switches SECURITY DOOR CONTROLS. 400 Series 410 & 420 Series. Finishes. Finishes. Options. Options. Specifications.

Power Transfer Devices. Access Control Accessories. How To Order. How to Order

EXIT CHECK DELAYED EGRESS LOCKS

MODEL KP-200 VANDAL RESISTANT & WEATHERPROOF FLUSH MOUNT DIGITAL KEYPAD DESIGNED FOR ACCESS CONTROL APPLICATIONS

INSTALLATION INSTRUCTIONS EXIT CHECK DELAYED EGRESS EMLOCK 1511S / 1511T

Exit Check Integrated Delayed Egress Locks

STANDARD FEATURES SPECIFICATIONS

705 Emmett Street Bristol, CT DynaLock MODEL 3101C-TJ101 DELAY EGRESS SYSTEM WIRING INSTRUCTIONS

300 SERIES MINI MAGNETIC LOCK 1000 SERIES INDUSTRIAL MAGNETIC LOCK 1100 SERIES ARCHITECTURAL MAGNETIC LOCK 1100 SERIES MORTISE MAGLOCK & DOOR PULL

CHECK NEW PRODUCTS SECTION FOR NEW INNOVATIVE SOLUTIONS

DOLKPS1KB Programming & Installation Manual

RESTROOM CONTROL KITS

RDM LOCK G Series Electromagnetic Lock. Listings. Standard Features. Ordering Information:

CM-RQE70 PIR REQUEST TO EXIT DETECTOR

Section 1: General Description. Section 2: Features. Section 3: Operation. CM-RQE70 PIR REQUEST TO EXIT DETECTOR Installation Instructions.

Exit Check Integrated Delayed Egress Locks

300 SERIES MINI MAGNETIC LOCK 1000 SERIES INDUSTRIAL MAGNETIC LOCK 1100 SERIES ARCHITECTURAL MAGNETIC LOCK 1100 SERIES MORTISE MAGLOCK & DOOR PULL

CM-RQE70A PIR REQUEST TO EXIT DETECTOR

KP-100A BACKLIT DIGITAL KEYPAD FOR ELECTRIC LOCK AND SECURITY SYSTEM INSTALLATIONS

DE5300 Delayed Egress System. General Information

POWER TRANSFERS ACCESSORIES EAC. Manufacturer Product Product No. Product Description Item No.

Remote Chexit Module (RCM) System. General Information

ACCESS & EGRESS LOCKING DEVICES SOLUTIONS. 1.2 Delayed Egress Locks. The lock behind the system. SDCSecurity.com

Pilfergard Door Alarms

ACSI AO ELECTRIC LATCH RETRACTION CONTROLLER INSTALLATION INSTRUCTIONS I.D. 1089, REV. F

PoE SOLUTIONS Power over Ethernet Capable Locking Hardware SOLUTIONS

CM800 Emergency Call System

DS3MX-E-I. Installation Guide. 3 Zone Mini Control Panel

300 SERIES MINI MAGNETIC LOCK 1000 SERIES INDUSTRIAL MAGNETIC LOCK 1100 SERIES ARCHITECTURAL MAGNETIC LOCK 1100 SERIES MORTISE MAGLOCK & DOOR PULL

HEIGHTS KEY LOCK & SAFE 920 San Mateo NE Albuquerque, NM Contact us for more information

Addendum for STI-6406 with Dual Access Control

380 SERIES REMOTE SIREN ETSA380R

CX-WC SERIES RESTROOM CONTROL KITS ELECTRIFIED LOCKS, RELAYS & TIMERS BARRIER FREE RESTROOM CONTROL FEATURES DESCRIPTION APPLICATION

631RF Amp Power Supply

0$; Installation Instructions. Computerized Control Panel '(6&5,37,21 63(&,),&$7,216 DE5011 1

SPLIT-DECODED CONTROLLER

DOLKPL1KB DOLKPS1KB DOLKSF1KB

385 SERIES REMOTE HANDHELD SIREN ETSA385HR

ACCESS & EGRESS REMOTE CONTROLS SOLUTIONS. The lock behind the system. SDCSecurity.com

Exit Stopper. STI-6400 Series

Digital & Card Access Control Systems

White Papers: Delayed Egress Hardware

AIRPORTS. CARECALLER PowerfulSecuritySolutionsForSeriousSecurityNeeds

APS-300 SERIES DUAL VOLTAGE UL 294 LISTED ACCESS CONTROL POWER SUPPLIES

4700 SERIES PLC INTERLOCK CONTROLLER

Alarmed Exit Hardware

2409/2900. Fire Guard

22-F fire exit rim device for all types of 4 x 8 (1219mm x 2438mm) single doors and 8 x 8 (2438mm

Installation Instructions. PS902 Power Supply. These instructions cover the following parts: PS902 Power Supply Specifi cations:

MODEL B2 INSTALLATION MANUAL

EXTINGUISHING AGENT RELEASE MODULE

2408/2900. Fire Guard

Conventional Fire Alarm System 2014 V1.2

FIREFLY II PLUS RELEASE DEVICES INSTALLATION MANUAL

MODEL ZA-8N EIGHT ZONE ANNUNCIATOR FOR ALL MONITORING APPLICATIONS OUTSTANDING FEATURES

THE "SS90" SERIES RELEASE DEVICES MODEL B2 INSTALLATION MANUAL

LMA LINE MONITOR ALERT USER S MANUAL

SECTION NURSE CALL SYSTEM

1 measurement signal input 4-20 ma for connection to an external gas sensor 5 freely programmable alarm switching points per measuring point

CORNELL Emergency Response Systems

2408/2900. Fire Guard. SARGENT Manufacturing Company 2004, 2007 All rights reserved

DS160/161 Request To Exit PIR sensors Installation Instructions

SECURITRON MODEL DPA-12 AND DPA-24 DOOR PROP ALARM TIMERS INSTALLATION AND OPERATING INSTRUCTIONS

Wander-Alarm DOORWAY SENSORS

Tek-SAFE Area of Rescue Assistance System

EM 3000-EW AH INSTALLATION EARLY WARNING ELECTROMAGNETIC LOCK A. INTRODUCTION B. DELAY EGRESS FUNCTIONS

SOLID STATE SECURITIES, INC. THE "SS90" SERIES RELEASE DEVICES MADE IN THE U.S.A. SS90-WPS MODEL A/B INSTALLATION MANUAL

Exit Stopper. STI-6400 Series

ABLOY EFEND. New name for security

Tailgate > Entry Sentry > ES5200

EVO192 v3.0 Fire and Burglary What s New

PRODUCT INTRODUCTION

Alarm Tone Generator Model AG17

CX-WC SERIES RESTROOM CONTROL KITS ELECTRIFIED LOCKS, RELAYS & TIMERS BARRIER FREE RESTROOM CONTROL FEATURES DESCRIPTION APPLICATION

MR-2602 Two Zone Fire Alarm Control Panel

4040 FM 535 F :

La Marche Manufacturing Company Option 46 Series. Digital Combined Accessory Package. Installation and Operation Manual

RELEASE DEVICES RELEASE DEVICE-WPS MODELS A/B INSTALLATION MANUAL U.L. LISTED CANADIAN LISTED CSFM: :100 GENERAL DESCRIPTION:

RELEASE DEVICE CONTROLS

ALARMED EXIT HARDWARE

Securitron Magnalock Corporation S. 51 st St., Ste. 102 Phoenix, AZ Phone: (800) MAGLOCK

SPLIT DECODED SECURITY KEYPAD

VANDAL RESISTANT BACK-LIT WEATHERPROOF RFID ACCESS CONTROL KEYPAD

CLEANROOM MONITOR CR3A Network - Installation Instructions

Firefly II Multi Voltage RELEASE DEVICES. Firefly II & IIB-MV INSTALLATION MANUAL

POWER SOURCES MODEL NO. DESCRIPTION PRICE

Flair 500 Series Annunciators

v Model No: TIMER Multi-function Timer Module Please note: * eeee on the display indicates a non valid dip-switch setting.

Transcription:

Security Door Controls Multi-Mode Annunciators Multi-Mode Annunciators, like SDC s Door Prop Alarm, EA100, 101 and 400 Series LED s, Sirens, Buzzers & Speakers, come in a variety of door, frame, wall, ceiling or 1 and 2 gang box configurations to provide the ultimate in door status indication, access control system compatibility and control. Annunciators 7 274

DATA EA Series Door Prop Alarm SDC DESIGNED AND MANUFACTURED EA-SN FEATURES EA-728 EA-708 With a visually appealing and functional design, SDC Door Prop Alarms are compatible with all access control systems but can also function as a stand-alone solution. Now you can support positive access control and security behavior by students on campus and employees at facilities. Improve security with a cost-effective door prop alarm. All SDC door prop alarms feature audible sirens with adjustable timer settings, two outputs, bypass status indicator light, and vandal-resistant aluminum construction. Available to install in single gang or double gang enclosures, SDC door prop alarms also offer optional Keylock and Mortise Cylinder Reset/ Bypass Switches. Adjustable Timed Delay Exit Alarm on Door Opening Automatic or Manual Alarm Reset Output Relays Integral Tri-color LED Status Indicator Optional Key Reset/Bypass Switch Compact Universal Mounting 85dB Piezo Buzzer Alarm MODELS EA-SN EA-728V EA-708V Door Prop Alarm, Single Gang w/ integral Status LED & Audible Alarm Double Gang w/ integral Status LED, Audible Alarm & Keylock Switch for Reset/Bypass Double Gang w/ integral Status LED, Audible Alarm & Mortise Key Cylinder Switch for Reset/Bypass (Cylinder not included) FIELD 12 24 SELECTABLE YEAR 5 WARRANTY POWER 275 Access Controls Annunciators

SPECIFICATIONS Power Mounting 12 or 24 VDC EA-SN: Single Gang 1/4 Aluminum Thick Plate w/ security screws EA-728, -708: Double Gang 1/4 Aluminum Plate w/ security screws Trigger Input Remote Reset/Bypass Input Dry, N/O or N/C (Selectable by on board jumper), Door Contact (Sold Seperately) Dry, N/O. Reset by momentarily shorting the input when alarmed. Bypass by shorting & holding the input when secure. Alarm Sound Level 85dB Piezo Buzzer Alarm Output Form C, 2A @ 30VDC max Status Annunciator Tri-colored LED Auxilary Output Form C, 2A @ 30VDC max. Follows Door Contact input, or Alarm output (fieldselectable) OPERATION EA-SN LED is normally solid green and the alarm output relay is energized with power ON and the door closed. Opening the door initiates an alarm delay period. If door does not close before the delay period expires, then the LED turns RED, the audible alarm is activated and the alarm output relay is de-energized. Closing the door before the delay period expires will reset the delay period timer. The alarm delay period shall be field selectable from 0-60 seconds (via adjustable pot) There shall be (3) user-selectable options for resetting an alarm condition: 1. Automatic reset on door closure 2. Automatic reset 60 seconds after door closure. Reopening the door during the 60 seconds will keep the door in an alarm condition until the door closes again, and restarts the 60 second timer. Once the door is closed, the door may also be manually reset using the remote reset input. 3. Manual reset only An alarm condition latches, and is not reset until the door is closed and the reset input is triggered. Bypassing the alarm by holding the reset/bypass input will result in a flashing green LED). EA-728, EA-708 LED is normally solid green and the alarm output relay is energized with power ON and the door closed. Opening the door initiates an alarm delay period. If door does not close before the delay period expires, then the LED turns RED, the audible is activated and the alarm output relay is deenergized. Closing the door before the delay period expires will reset the delay period timer. The alarm delay period shall be field selectable from 0-60 seconds (via adjustable pot) There shall be (3) user-selectable options for resetting an alarm condition: 1. Automatic reset on door closure 2. Automatic reset 60 seconds after door closure. Reopening the door during the 60 seconds will keep the door in an alarm condition until the door closes again, and restarts the 60 second timer. Once the door is closed, the door may also be manually reset using the remote reset input OR built-in keylock. 3. Manual reset only An alarm condition latches, and is not reset until the door is closed and (1) the remote reset input is momentarily triggered OR (2) the built-in keylock is momentarily turned to the Reset position. The alarm may be bypassed by shorting & holding the remote reset/bypass input, OR by turning the built-in keylock to the Bypass position. Returning the keylock to the center position will rearm the door. Bypass mode will result in a flashing green LED. ACCESSORIES DPS-11 MC-4M Ball Switch Door Position Sensor The SDC DPS-11 ball switch is compatible with swinging or sliding doors. Recommended uses include communicated doors, mantraps, auto re-lock switches and high current applications. Concealed Magnetic Contact Door Position Sensor Designed for vandal resistance, the SDC MC-4M is installed in the mortise of a hollow metal or aluminum frame and wood, hollow metal or aluminum door. MC-4PAK Magnetic Switch Door Position Sensor - 10 pack Ideal for door status monitoring, the SDC MC-4 is easily installed in hollow metal and aluminum doors and frames. Annunciators MC-7 CYL-KD High Security Magnetic Switch Door Position Sensor Biased for high security door status monitoring, the MC-7 guards against false status indication caused by the presence of an additional magnet. Installed in hollow metal and aluminum doors and frames. Recommended for high security applications. 1-1/8 Key Cylinder with 2 keys, keyed differently, for use with EA-708 276

DATA EA100 Multi Mode Exit Annunciator SDC DESIGNED AND MANUFACTURED The SDC Exit Annunciator is a highly visible multi-color signal device, that interfaces with Delayed Egress or standard EMLocks and can be used as a wall, ceiling, or frame mount indicator. FEATURES Easy to install Suitable for retrofit or new construction Externally selectable color modes of Red, Green, Blue, White, Yellow and Purple Multi color LED technology Externally selectable Solid or Flashing Modes Includes optional Illumination Hood for improved side visibility Multi-Use Brand Compatibility Stand Alone Multi-Mount Frame Mount SDC Rofu Schlage Secolarm Ceiling Mount RCI Dynalock Multi-Brand Securitron Doorking MODELS EA100 Multi-Color Signal Device FIELD 12 24 SELECTABLE Wall Mount YEAR 5 WARRANTY POWER 277 Access Controls Annunciators

SPECIFICATIONS Dimensions: EA100 Hood Electrical Weight 8-3/4 x 1-1/2 x 3/4 8-7/8 x 1-5/8 x 1-1/2 12/24 VDC @ 80/100mA max power 0.45 lbs APPLICATION Airport - Alarmed Exit Laboratory - Clean Room Annunciators Nurse Care - Wandering Patient Retail - Alarmed Exit 278

400U Series Wall & Frame LED Status Indicators FEATURES Easy to Install Single Gang or Narrow Frame Mount Multi Color LED Technology MODELS 400U-L2 SDC Monitor Station, 1-Gang, (2) LED s 400NU-L2 SDC Monitor Station, Narrow Plate, (2) LED s 400U-L3 The SDC 400U Status Indicator are used for single gang and narrow frame mount assemblies. It is equipped with LED status indicators to provide indication of door or lock status. SDC Monitor Station, 1-Gang, (3) LED s 400U-LT1 SDC Monitor Station, 1-Gang, (1) Tri-Color LED, Red, Green, Amber 400U-LT2 SDC Monitor Station, 1-Gang, (2) Tri-Color LED, Red, Green, Amber SPECIFICATIONS Faceplate Dual Voltage Weight Stainless Steel 12/24VDC, 20 ma per LED 1.0 lbs FIELD 12 24 SELECTABLE YEAR 5 WARRANTY 279 Access Controls Annunciators

Annunciators 280

400 Series Wall & Frame Mount Sirens & Buzzers The SDC 400 Siren and Buzzer Series are used for single gang or narrow frame mount assemblies to provide indication of door open or unlocked status. FEATURES Easy to Install Single Gang or Narrow Frame Mount Buzzer or Siren Alert Warning 400U-SN SPECIFICATIONS Faceplate Stainless Steel Dual Voltage 12/24VDC Weight 1.0 lbs 400U-RBM MODELS 400U-RMB SDC Alarm Station, 1-Gang, Buzzer 86dbA, 24 ma @ 24VDC 400NU-RMB SDC Alarm Station, Narrow 1-3/4, SS, Buzzer 86dbA, 24 ma @ 24VDC 400U-SN SDC Alarm Station, 1-Gang, Siren 85 db, 18mA @ 24VDC 400NU-SN SDC Alarm Station, Narrow 1-3/4, Siren 85 db, 18mA @ 24VDC 400NU-SN 400NU-RBM YEAR 5 WARRANTY 281 Access Controls Annunciators

Annunciators 282

101 Series Annunciators SPECIFICATIONS Faceplate Voltage LED Weight 101-1A Compatible with all ExitCheck systems, the 101 Series Annunicators provide door status at a remote location such as a nurse s station, guard station or office. The tri-color LED provides precise delay mode status. 20 Gauge Stainless Steel 20 ma @ 12/24VDC Tri-Color Green (Secure), Amber (Alarm/Door Locked), Red (Alarm/Door Unlocked) 1.5 lbs 101-1AK 101-PAM MODELS 101-1A Single Door Annunicator 101-4AM 101-1AK 101-PAM 101-SP 101-SPSN 101-4AM Four Door Annunicator Single Door Annunicator with Key Control Single Door Annunicator with Push Switch External 15 Watt Speaker Remote Annunicator with Speaker & Siren FIELD 12 24 SELECTABLE YEAR 5 WARRANTY 283 Access Controls Annunciators

PRODUCT SKU SAMPLE: 101-SPSN HOW TO ORDER 1 SPECIFY MODEL Model 1 Gang 2 Gang Tri-Color LED Audiable Alarm Description 101-1A X X X Remote or local single door annunciator 101-4AM X 4 LEDs X 101-1AK X X X 101-PAM 101-SP 101-SPSN X X X Remote four door annunicator with audible alarm mute button Remote or local single door annunicator with 2 function key swtich for on/off and reset. Accepts standard 1-1/8 to 1-1/4 Mortise key cylinder (Mortise key cylinder not included). Remote single door annunciator with 3 push button switches for momentary access. On/off and audible mute button (Recommended for remote instatllation only). External 15 watt speaker connects directly to 1511S or 1511T for enhanced decibels onsite or remote voice message annuniciation. Speaker driver may be provided by others for extreme decibel requirements. X Remote annunciator with speaker and 80db tone. Duplicates ExitCheck 101-DE/KDE alternating voice message and tone. 101-1A 101-4AM 101-PAM 101-1AK Annunciators 101-SPSN 101-SP 284

285 Access Controls Annunciators