SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 THAILAND Mr. Dirk Fleischer (Quality Manager / Authorized Representative) Phone: +66 2716 853 0 Email: fleischer@eurofins.co.th Mr. Detlef Dahms (Deputy Authorized Representative) Phone: +66 2716 853 0 Email: detlefdahms@eurofins.co.th ELECTRICAL Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory at the location listed above, as well as the satellite location listed below to perform the following electromagnetic compatibility and product safety tests: Electromagnetic Compatibility Test Technology Test Method(s) 2 Emissions Radiated / Conducted FCC Part 15 B (using ANSI C63.4-2003 and/or ANSI C63.4-2009); FCC Part 18 (using MP5); IEC CISPR 11; AS/NZS CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; J55013 (H22); AS/NZS CISPR 14.1; EN 55014-1; IEC CISPR 14-1; J55014-1(H20); IEC CISPR 15; IEC CISPR 15 (2005+ A1: 2007+ A2: 2008); AS/NZS CISPR 15; EN 55015; TIS 1955-2542; TIS 1955-2551; J55015 (H20); IEC CISPR 22; IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS 1956-2553; J55022 (H22); J55022 (H20); EN 55032; CISPR 32 Current Harmonics IEC 61000-3-2; IEC 61000-3-2 (2005+ A1: 2008+ A2: 2009); EN 61000-3-2; TIS 1448-2544; AS/NZS 61000.3.2 Voltage Fluctuation / Flicker IEC 61000-3-3; IEC 61000-3-3 (2008); EN 61000-3-3; TIS 1449-2552; AS/NZS 61000.3.3 Disturbance Power AS/NZS CISPR 14.1; IEC CISPR 14-1; EN 55014-1; J55014-1 (H20) Click Rate AS/NZS CISPR 14.1; IEC CISPR 14-1; EN 55014-1; J55014-1 (H20) Insertion Loss AS/NZS CISPR 15; CISPR 15; EN 55015; J55013 (H22) (A2LA Cert. No. 2402.01) 02/26/2016 Page 1 of 16

Test Technology Test Method(s) 2 Immunity Electrostatic Discharge IEC 61000-4-2; IEC 61000-4-2 (1995+ A1: 1998+ A2: 2000); EN 61000-4-2; TIS 1452-2552 Radiated Immunity IEC 61000-4-3; IEC 61000-4-3 (2006); EN 61000-4-3; TIS 1453-2552; IEC 61000-4-20; EN 61000-4-20 Electrical Fast Transients (Burst) IEC 61000-4-4; IEC 61000-4-4 (2004); EN 61000-4-4; TIS 1454-2552 Surge Immunity IEC 61000-4-5; IEC 61000-4-5 (2005); EN 61000-4-5; TIS 1455-2540 Conducted Immunity IEC 61000-4-6; EN 61000-4-6; TIS 2394-2551 Magnetic Field Immunity IEC 61000-4-8; IEC 61000-4-8 (1993+ A1: 2000); EN 61000-4-8; TIS 1457-2552 Voltage Dips Short Interruptions Voltage Variations Harmonics and Interharmonics Including Mains Signaling at A.C. Power Port, Low Frequency IEC 61000-4-11; IEC 61000-4-11 (2004); EN 61000-4-11; TIS 1460-2552 IEC 61000-4-13; EN 61000-4-13 Audio / Video Immunity EN 55020; IEC CISPR 20 Product Family/ Generic Standard International IEC 61000-4-1 EN 61000-4-1 TIS 1451-2552 IEC 61000-6-1 EN 61000-6-1 IEC 61000-6-2 EN 61000-6-2 IEC 61000-6-3 EN 61000-6-3 IEC 61000-6-4 EN 61000-6-4 Electromagnetic compatibility (EMC) Part 4- I: Testing and measurement techniques Overview of IEC 61000-4 series. Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity for residential, commercial and lightindustrial environments Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments (A2LA Cert. No. 2402.01) 02/26/2016 Page 2 of 16

EN 50083-2 TIS 2168-2547 Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment EN 50130-4 Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems EN 55014-2 IEC CISPR 14-2 IEC CISPR 20 IEC CISPR 20 (2006) EN 55020 TIS 2076-2552 IEC CISPR 24 IEC CISPR 24 (1997+ A1: 2001+ A2: 2002) EN 55024 IEC CISPR 24 TIS 2077-2544 IEC 60601-1-2 IEC 60728-2 IEC 60947-1 EN 60947-1 IEC 60947-2 EN 60947-2 IEC 61326-1 EN 61326-1 IEC 61326-2-2 EN 61326-2-2 IEC 61547 EN 61547 Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity Product family standard Sound and television broadcast receivers and associated equipment Immunity characteristics Limits and methods of measurement Information technology equipment Immunity characteristics Limits and methods of measurement Medical electrical equipment Part 1-2: General requirements for safety Collateral standard: Electromagnetic compatibility Requirements and tests. Cable networks for television signals, Sound signals and interactive services Part 2: Electromagnetic compatibility for equipment Low-voltage switchgear and control gear Part 1: General rules Low-voltage switchgear and control gear Part 2: Circuitbreakers Electrical equipment for measurement, control and laboratory use EMC requirements Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-2: Particular requirements Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems Equipment for general lighting purposes EMC immunity requirements (A2LA Cert. No. 2402.01) 02/26/2016 Page 3 of 16

EN 55103-1 EN 55103-2 EN 55032 CISPR 32 IEC 62233 EN 62233 EN 50366 Electromagnetic compatibility Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Part 1: Emission Electromagnetic compatibility Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Part 2: Immunity Electromagnetic compatibility of multimedia equipment Emission requirements Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Household and similar electrical appliances Electromagnetic fields Methods for evaluation and measurement (A2LA Cert. No. 2402.01) 02/26/2016 Page 4 of 16

Product Safety Test Standards International IEC 62115 EN 62115 IEC 60529 EN 60529 IEC 60065 EN 60065 TIS 1195-2536 IEC 60950-1 (2005) IEC 60950-1 EN 60950-1 TIS 1561-2548 IEC/EN 60034-1,-2,-3,-4,-5,-6,-7,-8,- 9,-11,-12,-13,-14,-15,-16,-18,-22 IEC 60204-1 EN 60204-1 IEC 60335-1 (2001+ A1: 2004+ A2: 2006) IEC 60335-1 EN 60335-1 TIS 1375-2547 IEC 60335-2-2 EN 60335-2-2 TIS 1522-2552 IEC 60335-2-3 EN 60335-2-3 TIS 366-2547 IEC 60335-2-4 (2002+ A1: 2004+ A2: 2006) IEC 60335-2-4 EN 60335-2-4 TIS 1542-2541 IEC 60335-2-5 (2002+ A1: 2005) IEC 60335-2-5 EN 60335-2-5 TIS 1838-2542 Safety of electric toys Degrees of protection provided by enclosures (IP code) Audio, video and similar electronic apparatus Safety requirements Information technology equipment Safety Part I: General Requirements Rotating electrical machines Rating and performance Safety of machinery Electrical equipment of machines Part 1: General requirements Household and similar electrical appliances Safety Part 1: General Requirements Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliance Part 2-3: Particular requirements for electric irons Part 2-4: Particular requirements for spin extractors Part 2-5: Particular requirements for dishwashers (A2LA Cert. No. 2402.01) 02/26/2016 Page 5 of 16

IEC 60335-2-6 (2002+ A1: 2004) IEC 60335-2-6 EN 60335-2-6 TIS 1913-2542 IEC 60335-2-7 (2002+ A1: 2004+ A2: 2006) IEC 60335-2-7 EN 60335-2-7 TIS 1463-2540 IEC 60335-2-8 (2002+ A1: 2005) IEC 60335-2-8 EN 60335-2-8 TIS 1555-2550 IEC 60335-2-9 (2002+ A1: 2004+ A2: 2006) IEC 60335-2-9 EN 60335-2-9 TIS 1641-2552 IEC 60335-2-11 (2003) IEC 60335-2-11 EN 60335-2-11 TIS 1389-2539 IEC 60335-2-12 (2005) IEC 60335-2-12 EN 60335-2-12 TIS 1775-2542 IEC 60335-2-13 (2002+ A1: 2004) IEC 60335-2-13 EN 60335-2-13 TIS 2013-2543 IEC 60335-2-14 (2006) IEC 60335-2-14 EN 60335-2-14 TIS 1515-2550 IEC 60335-2-15 EN 60335-2-15 TIS 2439-2552 IEC 60335-2-21 EN 60335-2-21 Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Part 2-7: Particular requirements for washing machines Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances Part 2-11: Particular requirements for tumble dryers Part 2-12: Particular requirements for warming plates and similar appliances Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Part 2-14: Particular requirements for kitchen machines Part 2-15: Particular requirements for appliances for heating liquids Part 2-21: Particular requirements for storage water heaters (A2LA Cert. No. 2402.01) 02/26/2016 Page 6 of 16

IEC 60335-2-23 (2005) IEC 60335-2-23 EN 60335-2-23 TIS 1985-2549 IEC 60335-2-24 EN 60335-2-24 TIS 2214-2548 IEC 60335-2-25 (2002+ A1:2005+ A2:2006) IEC 60335-2-25 EN 60335-2-25 TIS 1773-2548 IEC 60335-2-26 EN 60335-2-26 IEC 60335-2-27 (2002+ A1:2004+ A2:2007) IEC 60335-2-27 EN 60335-2-27 TIS 1877-2542 IEC 60335-2-29 (2002+ A1: 2004) IEC 60335-2-29 EN 60335-2-29 TIS 1676-2541 IEC 60335-2-30 EN 60335-2-30 IEC 60335-2-31 (2002+ A1: 2006) IEC 60335-2-31 EN 60335-2-31 TIS 1996-2552 IEC 60335-2-32 (2005) IEC 60335-2-32 EN 60335-2-32 TIS 1803-2542 IEC 60335-2-34 EN 60335-2-34 IEC 60335-2-35 (2002+ A1: 2006) IEC 60335-2-35 EN 60335-2-35 TIS 1693-2547 Part 2-23: Particular requirements for appliances for skin or hair care Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Part 2-26: Particular requirements for clocks Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Part 2-29: Particular requirements for battery chargers Part 2-30: Particular requirements for room heaters Part 2-31: Particular requirements for range hoods Part 2-32: Particular requirements for massage appliances Part 2-34: Particular requirements for motor-compressors Part 2-35: Particular requirements for instantaneous water heaters (A2LA Cert. No. 2402.01) 02/26/2016 Page 7 of 16

IEC 60335-2-40 (2002+ A1: 2005+ A2: 2005) IEC 60335-2-40 EN 60335-2-40 TIS 1529-2541 IEC 60335-2-41 EN 60335-2-41 TIS 1548-2551 IEC 60335-2-44 (2003) IEC 60335-2-44 EN 60335-2-44 TIS 1567-2551 IEC 60335-2-45 EN 60335-2-45 IEC 60335-2-52 (2005) IEC 60335-2-52 EN 60335-2-52 TIS 1543-2541 IEC 60335-2-53 (2002+ A1: 2007) IEC 60335-2-53 EN 60335-2-53 TIS 1804-2542 IEC 60335-2-54 EN 60335-2-54 IEC 60335-2-55 EN 60335-2-55 IEC 60335-2-56 EN 60335-2-56 IEC 60335-2-59 (2002+ A1: 2006) IEC 60335-2-59 EN 60335-2-59 TIS 1552-2551 IEC 60335-2-65 EN 60335-2-65 TIS 1516-2549 IEC 60335-2-74 (2002+ A1: 2006) IEC 60335-2-74 EN 60335-2-74 TIS 1908-2552 Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Part 2-41: Particular requirements for pumps Part 2-44: Particular requirements for ironers Part 2-45: Particular requirements for portable heating tools and similar appliances Part 2-52: Particular requirements for oral hygiene appliances Part 2-53: Particular requirements for sauna heating appliances Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds Part 2-56: Particular requirements for projectors and similar appliances Part 2-59: Particular requirements for insect killers Part 2-65: Particular requirements for air-cleaning appliances Part 2-74: Particular requirements for portable immersion heaters (A2LA Cert. No. 2402.01) 02/26/2016 Page 8 of 16

IEC 60335-2-78 EN 60335-2-78 IEC 60335-2-80 EN 60335-2-80 TIS 934-2533 IEC 60335-2-81 EN 60335-2-81 IEC 60335-2-84 EN 60335-2-84 IEC 60335-2-88 EN 60335-2-88 IEC 60335-2-89 EN 60335-2-89 IEC 60335-2-98 EN 60335-2-98 IEC 60598-1 EN 60598-1 IEC 60598-2-1 EN 60598-2-1 TIS 902-2532 IEC 60598-2-2 EN 60598-2-2 TIS 903-2532 IEC 60598-2-3 EN 60598-2-3 TIS 904-2532 IEC 60598-2-4 (2002) IEC 60598-2-4 EN 60598-2-4 TIS 905-2532 IEC 60598-2-5 EN 60598-2-5 TIS 906-2532 IEC 60598-2-6 EN 60598-2-6 Part 2-78: Particular requirements for outdoor barbecues Part 2-80: Particular requirements for fans Part 2-81: Particular requirements for foot warmers and heating mats Part 2-84: Particular requirements for toilets Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor Part 2-98: Particular requirements for humidifiers Luminaries Part 1: General requirements and tests Part 2-1: Particular requirements Fixed general purpose luminaries Part 2-2: Particular requirements Recessed luminaires Part 2-3: Particular requirements Luminaires for road and street lighting Part 2-4: Particular requirements Portable general purpose luminaries Part 2-5: Particular requirements Floodlights Part 2-6: Particular requirements Luminaries with built-in transformers or converters for filament lamps (A2LA Cert. No. 2402.01) 02/26/2016 Page 9 of 16

IEC 60598-2-7 EN 60598-2-7 IEC 60598-2-8 EN 60598-2-8 TIS 907-2532 IEC 60598-2-9 EN 60598-2-9 IEC 60598-2-10 EN 60598-2-10 IEC 60598-2-17 EN 60598-2-17 IEC 60598-2-20 EN 60598-2-20 IEC 60598-2-22 EN 60598-2-22 IEC 60598-2-23 EN 60598-2-23 IEC 60598-2-24 EN 60598-2-24 IEC 60730-1 EN 60730-1 IEC 61010-1 EN 61010-1 TIS 2001-2543 IEC 61010-031 EN 61010-031 IEC 61010-2-032 EN 61010-2-032 IEC 61199 EN 61199 TIS 2235-2548 IEC 61347-1 EN 61347-1 Part 2-7: Particular requirements Portable luminaries for garden use Part 2-8: Particular requirements Hand lamps Part 2-9: Particular requirements Photo and film luminaries (non-professional) Part 2- l0: Particular requirements Portable luminaries for children Part 2-17: Particular requirements Luminaries for stage lighting, television film and photographic studios (outdoor and indoor) Part 2-20: Particular requirements Lighting chains Part 2-22: Particular requirements Luminaries for emergency lighting Part 2-23: Particular requirements Extra low-voltage lighting systems for filament lamps Part 2-24: Particular requirements Luminaries with limited surface temperatures Automatic electrical controls for household and similar use Part 1: General requirements Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement Single-capped fluorescent lamps Safety specifications Lamp Control gear- Part 1: General and safety requirements (A2LA Cert. No. 2402.01) 02/26/2016 Page 10 of 16

IEC 61347-2-1 EN 61347-2-1 IEC 61347-2-3 EN 61347-2-3 IEC 61347-2-4 EN 61347-2-4 IEC 61347-2-13 EN 61347-2-13 IEC 61558-1 EN 61558-1 IEC 61558-2-1 EN 61558-2-1 IEC 61558-2-2 EN 61558-2-2 IEC 61558-2-4 EN 61558-2-4 IEC 61558-2-6 EN 61558-2-6 IEC 61558-2-7 EN 61558-2-7 IEC 61558-2-8 EN 61558-2-8 IEC 61558-2-9 EN 61558-2-9 IEC 61558-2-12 EN 61558-2-12 IEC 61558-2-13 EN 61558-2-13 IEC 61558-2-16 EN 61558-2-16 IEC 60432-1 EN 60432-1 Part 2-1: Particular requirements for starting devices (other than glow starters) Part 2-3: Particiular requirements for AC and/or DC supplied electronic control gear for fluorescent lamps Part 2-4: Particular requirements for DC supplied electronic ballasts for general lighting Part 2-13: Particular requirements for DC or AC supplied electronic control gear for LED modules Safety of power transformers, power supply units and similar Part 1: General requirements and tests Part 2-1: Particular requirements for separating transformers for general use Part 2-2: Particular requirements for control transformers Part 2-4: Particular requirements for isolating transformers for general use Part 2-6: Particular requirements for safety isolating transformers for general use Part 2-7: Particular requirements for transformers for toys Part 2-8: Particular requirements for bell and chime transformers Part 2-9: Particular requirements for transformers for class III hand lamps for tungsten filament lamps Part 2-12: Particular requirements for constant voltage transformers Part 2-13: Particular requirements for auto-transformers for general use Part 2-16: Particular requirements for transformers for switch mode power supplies. Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (A2LA Cert. No. 2402.01) 02/26/2016 Page 11 of 16

IEC 60432-2 EN 60432-2 IEC 60432-3 EN 60432-3 IEC 60947-1 EN 60947-1 IEC 61800-5-1 EN 61800-5-1 Incandescent lamps Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes Incandescent lamps Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle) Low-voltage switchgear and control gear Part 1: General rules Adjustable speed electrical power drive systems Part 5-1: Safety requirements Electrical, thermal and energy For typical products or types of products Specific Tests Available - Input current - Steady force test - Durability of markings - Drop test - Access to live parts - Stress relief - Energy hazards - Wall or ceiling mounted equipment - SELV circuits - Handles and manual controls - TNV circuits, limits, connections - Telecommunication network separation voltages generated externally and protection - Limited current circuits, values - Direct plug-in equipment - Resistances of earthing conductors - Protection against hazardous moving parts - Humidity conditioning - Thermal Requirements - Creepage distances, clearances - Temperature rise - Working voltage - Resistance to abnormal heat - Measurement of transient levels - Material tests, Flammability test - Thermal cycling and thermal ageing - Material tests, Glow wire test - Mechanical Strength - Electrical strength - Enclosed and sealed parts - Voltage surge test, Impulse test - Cord anchorage and strain relief - Stability - Touch current and protective conductor current test (A2LA Cert. No. 2402.01) 02/26/2016 Page 12 of 16

Energy Efficiency Test Standards International ISO 15502 IEC 62552 EN 62552 UAE.S IEC 62558 JIS C 9801 JS 1749 IS 15750 EN 153 UNIT 1138 EN 62087 AS/NZS 62087.1 IEC 62301 EN 62301 Household refrigerating appliances Characteristics and test methods Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers, and their combinations, together with associated characteristics Energy efficiency Electrical refrigerating equipment household specifications and labeling Methods of measurement for the power consumption of audio, video and related equipment Household electrical appliances Measurement of Standby power EN 50564 Electrical and electronic household and office equipment Measurement of low power consumption IEC 60107 EN 60107 IEC 60456 EN 60456 UAE.S IEC 60456 SASO 2683/2007 JIS C 9811 IS 14166 SASO 2664/2007 SASO 2664/2013 SASO 2692/2007 SASO 2692/2013 Methods of measurement on receivers for television broadcast transmission General considerations Measurements on displays at radio and video frequencies Clothes washing machines for household use Methods for measuring the performance Energy Performance and Capacity of Household refrigerators, refrigerator-freezers, and freezers Energy labelling requirements of household electrical clothes washing machines SASO 2693/2007 Clothes washing machines for household use Performance requirements (A2LA Cert. No. 2402.01) 02/26/2016 Page 13 of 16

SASO 2772/2009 SASO 2772/2016 Water consumption efficiency requirements for clothes washing machines Rating and labeling AS/NZS 4474.1 Performance of household electrical appliances Refrigerating appliances Energy consumption and performance AS/NZS 4474.2 Performance of household electrical appliances Refrigerating appliances Energy labelling and minimum energy performance standard requirements AS/NZS 2040.1 AS/NZS 2040.2 Performance of household electrical appliances Clothes washing machines Methods for measuring performance, energy and water consumption Performance of household electrical appliances Clothes washing machines Energy efficiency labelling requirements UAE.S.5010-2 Energy efficiency label for electrical appliances Part 2: Washing machines and dryers UAE.S.5010-3 Energy efficiency label for electrical appliances Part 3: Household refrigerating appliances JS 1717 (2006) JS 1888 (2012) JS 2102 JS 2101 IEC 62512 EN 62512 UAE.S IEC 62512 IEC 61121 EN 61121 UAE.S IEC 61121 JIS C 9606 JIS C 9607 Clothes washing machines for household use Methods for measuring the performance Technical regulation on eco-design requirements for household refrigerating appliances Energy labelling for household refrigerating appliances Electric clothes washer/dryers for household use Methods for measuring the performance Tumble dryers for house hold use Methods for measuring the performance Electric washing machines Household electric refrigerators, refrigerator-freezer and freezers (A2LA Cert. No. 2402.01) 02/26/2016 Page 14 of 16

Acoustics Test Standards International IEC 60704-1 EN 60704-1 IEC 60704-2-1 EN 60704-2-1 IEC 60704-2-2 EN 60704-2-2 IEC 60704-2-3 EN 60704-2-3 IEC 60704-2-4 EN 60704-2-4 IEC 60704-2-5 EN 60704-2-5 IEC 60704-2-6 EN 60704-2-6 IEC 60704-2-7 EN 60704-2-7 IEC 60704-2-8 EN 60704-2-8 IEC 60704-2-9 EN 60704-2-9 IEC 60704-2-10 EN 60704-2-10 IEC 60704-2-11 EN 60704-2-11 IEC 60704-2-13 EN 60704-2-13 IEC 60704-2-14 EN 60704-2-14 IEC 60704-3 EN 60704-3 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 1: General requirements Part 2-1: Particular requirements for vacuum cleaners Part 2-2: Particular requirements for fan heaters Part 2-3: Particular requirements for dishwashers Part 2-4: Particular requirements for washing machines and spin extractors Part 2-5: Particular requirements for electric thermal storage room heaters Part 2-6: Particular requirements for tumble dryers Part 2-7: Particular requirements for fans Part 2-8: Particular requirements for electric shavers Part 2-9: Particular requirements for electric hair care appliances Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these Part 2-11: Particular requirements for electrically-operated food preparation Part 2-13: Particular requirements for range hoods Part 2-14: Particular requirements for refrigerators, frozenfood storage cabinets and food freezers Part 3: Procedure for determining and verifying declared noise emission values (A2LA Cert. No. 2402.01) 02/26/2016 Page 15 of 16

ISO 3744 ISO 3745 ISO 7779 ISO 9295 ISO 9296 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and hemi-anechoic rooms Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment Acoustics Measurement of high-frequency noise emitted by computer and business equipment Acoustics Declared noise emission values of computer and business equipment 1 Accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory location listed below. 98/2 Moo 19, Tumbol Takhi Takhi District, Nakhon Sawan 60140, Thailand Test Technology Test Method(s) 2 Emissions Radiated FCC Part 15 B (using ANSI C63.4-2003 and/or ANSI C63.4-2009); FCC Part 18 (using MP5); IEC CISPR 11; AS/NZS CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; J55013 (H22); IEC CISPR 22; IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS 1956-2553; J55022 (H22); J55022 (H20); EN 55032; CISPR 32 2 When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per part C., Section 1 of A2LA R101 - General Requirements- Accreditation of ISO-IEC 17025 Laboratories. (A2LA Cert. No. 2402.01) 02/26/2016 Page 16 of 16

Accredited Laboratory A2LA has accredited EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD. Bangkok, Thailand for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 26 th day of February 2016. Senior Director of Quality & Communications For the Accreditation Council Certificate Number 2402.01 Valid to December 31, 2017 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.