Miro Wireless Dimming and Scene Control Made Elegantly Simple

Miro Wireless Dimming and Scene Control Made Elegantly Simple WIRELESS RF LIGHTING CONTROLS WIRING DEVICES

Miro Style Choose from the traditional styling of Miro Decorator (top) or the elegant simplicity of Miro Architectural (bottom). Contents Introduction 3 Overview 4-5 Design and Applications 6-9 Product Summary 10-11

Powerful Lighting Control Made Simple and Distinctive Miro is a state-of-the-art wireless lighting controls system that recalls up to 15 recorded scenes per room with the touch of a button. The flexibility of Wireless Miro lets you control the lighting while making a presentation at the front of the room, from a conference table during a meeting, or at the doorway to a room before entering. Scenes can be recalled from a variety of intuitive control devices, including a Touch Screen that can be mounted in the wall, sit table-top in a cradle or be used as a convenient handheld device. Miro is ideal for any space that has varied light level requirements, such as conference rooms, executive offices, restaurants, houses of worship, training centers and hotel suites. Wireless Miro Features Frequency-agile RF wireless communications eliminates control wiring, thereby reducing installation cost and increasing flexibility in both retrofit and new construction. Fully distributed architecture means no single point of failure and no costly central processor. Completely scalable system architecture makes Miro ideal for a wide range of applications and allows for future system expansion. Unsurpassed system capacity of over 1000 devices Provides a typical RF range of 100 feet without a repeater. Range can be significantly extended with repeaters. Integrates with automation devices and systems through a variety of RF interfaces. Coordinates control of lamps, ceiling fans and small appliances. UL listed; five-year warranty Industry-exclusive universal dimmer Miro Dimmers Save Energy and Extend Lamp Life Dimming the Lamps Saves Electricity Extends Lamp Life For detailed product information, refer to the Watt Stopper Product Selection Guide or our website at www.wattstopper.com 10% 10% 2x 25% 20% 4x 50% 40% 20x 75% 60% >20x 3

Features That Make Miro Versatile and Easy to Configure Universal Dimmer Controls Incandescent Magnetic and Electronic Low Voltage* Two-wire Fluorescent* Neon and Cold Cathode* 600W In-wall Dimmer: Available in Architectural or Decorator Style Optional Screwless Wall Plates Dimmer Features: Long-life Status LED Last Level Recall (preset) Solid State Triac Dimming Five-year Warranty 2000W Dimmer: 120V/277V Mount to 4 outlet box with 1.5"extension ring. Plenum Rated * Ballast/transformers must be approved for dimming Three/Four Way Dimming (or Switch/Fan) Control Without Travel Wire Multilocation Controller L N Multilocation Controller N Traveler (No need for travel wire) L MULTILOCATION EXAMPLE Universal Dimmer L N N Binding dimmers (or switches/fan controllers) provides seamless multi-way control from an unlimited number of locations. Scene Control Without Control Wires >>>> 4 A button press on a Scene Controller sends an RF message to recall up to 15 stored scenes in power devices (see page 10).

FCC ID: Q4B-TDREP 12-24VDC 200mA maximum + C U LI 88T9 Appliance Control - All wiring Class 2 05810r1 legrand Santa Clara, CA 800.879.8585 In 4 In 3 In 2 Prn Prn Prn Prn Tx Rx Net A Net B Plug-in Port Power Service Comm. Error MENU PREV. NEXT ENTER UP/ ON DOWN/ OFF Expansion Port Com 5 Com 4 Com 3 Com 2 Com 1 Cnl 5 Cnl 4 Cnl 3 Cnl 2 Cnl 1 Pwr Pwr + FCC ID: Q4B-TDREP 12-24VDC 200mA maximum + C U LI 88T9 Appliance Control - All wiring Class 2 05810r1 legrand Santa Clara, CA 800.879.8585 System Interfaces miro miro To Control System MRRC3 Room Scene Interface U L MRRC3 Room Scene Interface U L RS232 Serial Cable MR232 Network Controller Status LED Power Supply 24VDC Out. 150ma max. Ground Input 1 Input 2 Input 3 24VDC Out. 150ma max. Ground Input 1 Input 2 Input 3 Security Panel NOT USED SYSTEM CLOCK (SC-100) SC100 DB9 RS232 Port 2/20AWG 4/#20 Typical for all channels. Channel 1 shown Motion Sensor Power Ground COM NO 24VDC Out 150ma max. Ground Input 1 Input 2 Input 3 Room or House Scene Interface While not required, a number of system interface devices are available to expand Miro s functionality. Refer to the Miro Specification Guide for details. Touchscreen Control A Touch Screen allows fingertip control of up to 30 lighting groups (zones) and 15 scenes. Touch Screens may be mounted in the wall, sit table-top in a cradle or be used as a convenient handheld device. Adjustable fade time up to 254 seconds Password protected Configuration screens for simplified setup Sleep mode for extended battery life Available in Warm White, Light Almond or Charcoal Gray Programming Example: Creating a Group 1 Pick 2 any device to be included in the Press group and press until the LED starts flashing yellow. on each additional device until the LED flashes yellow. This indicates that the device has joined the group. 3 Return to the device where you began. Press until all LEDs stop flashing. Group binding is complete. Programming Wireless Miro does not require any special setup tools or training. 5

Restaurants Scene Controller recalls five scenes plus proportional ramping (if extended fade time is desired, use Touch Screen). Two additional Scene Controllers may be added for a total of 15 scenes plus on/off control. Scene Controller 600W Universal Dimmer Miro Automation Options 1) Security Panel Interface turns on a scene when disarming, and turns off the lights when armed (requires Scene Interface and available relay in the security system) 2) Flash/Force Lights On when an Alarm Occurs (requires Scene Interface and available relay in the security system) (Many other configuration options possible) 6 Legend Magnetic Low Voltage Dimmable CFL Dimmable Neon Floor Lamp Lamp Module 2000W Plenummounted Dimmer Additional Scene Controller

Houses of Worship A Handheld Remote allows the service leader to control lights from any point in the room. A Scene Controller at the entrance may be set to recall the same or different scenes as the handheld remote. In Wall Dimmer 2000W Closetmounted Dimmers Miro Automation Options 1) Security Panel Interface turns on a scene when disarming, and turns off the lights when armed (requires Scene Interface and available relay in the security system) 2) Automatic Shutoff (requires Scene Interface and Astronomic Time Clock) Multilocation Controller controls overhead pendant lights Scene Controller Legend Dimmable CFL Halogen 3) Interface to Other Control Systems (requires Network Controller for additional control options) (Many other configuration options possible) 7

Conference Rooms Three Dimmers and a Room Scene Controller provide individual group and scene control. The Dimmers may be installed in a closet to simplify operation and reduce wall clutter. Note that all wall-box Dimmers are 120V. The fluorescent lights are connected to a Universal Dimmer set to Advance Mark X operation. Three Dimmers One Room Scene Controller DT-200 Dual Technology Occupancy Sensor Miro Automation Options 1) Automatic On/Off (requires an occupancy sensor) 2) Interface to Other Control Systems (requires Network Controller for additional control options) 3) Control Via a Universal Remote (requires an IR Interface) (Many other configuration options possible) Optional: Handheld Remote Scene Controller (shown on conference table) Legend Dimmable CFL Fluorescent Light 8

Training Center Touch Screen located at the podium provides up to 15 scenes corresponding to the specific activity taking place, such as Presentation or Exam. Scene Controller provides scene control at door for all loads in the room. This entire training center is dimmed by one wall-mounted and two plenum-mounted Dimmers. DT-200 Dual Technology Occupancy Sensor Touch Screen 600W Dimmer and a Scene Controller Installed in a 2-gang Wall Box Legend Dimmable CFL Incandescent Lighting Fluorescent Lighting (for downlights) 2000W Plenummounted Dimmers (for fluorescent fixtures) Miro Automation Options 1) Automatic On/Off (requires an occupancy sensor) 2) Interface to Other Control Systems (requires Network Controller for additional control options) 3) Control Via a Universal Remote (requires an IR Interface) (Many other configuration options possible) 9

Wireless (RF) Lighting Controls POWER DEVICES are wired to the load DIMMERS and SWITCHES FAN CONTROLLERS 2000W REMOTE DIMMER (universal load 120V/277V) PLUG-IN MODULES (Lamp and Appliance) CONTROL DEVICES communicate to power devices via RF network MULTILOCATION CONTROLLERS (use with all power devices) SCENE CONTROLLERS (in-wall and handheld) TOUCH SCREEN (with optional cradle) KEY FOB (provided with visor clip) SYSTEM INTERFACES to expand system functionality REPEATER (extends RF range) NETWORK CONTROLLER (ASCII protocol) SCENE INTERFACE (input module) TIME CLOCK (use with a scene interface) MIRO Finishes Architectural Warm Light Charcoal Graphite Silicon Silicon Silicon Silicon White White White White Almond Gray Bronze Bronze Bronze Bronze Bronze Bronze Bronze Light Medium Dark Rust Light Medium Dark Patina Patina Patina Patina Patina Patina Patina Decorator White Light Almond Ivory Black 10

Wireless Miro Topdog Communications Wireless Miro uses a revolutionary RF communications layer with a comprehensive protocol technology (Topdog TM ). Via this 900 MHz communications technology (like many cordless phones), Miro creates a wireless control network. And since Topdog is frequency-agile, there s never any interference with other 900 MHz devices. Up to 1000 times faster than traditional power line technologies, Topdog is bidirectional and uses sophisticated errorcorrecting codes to guarantee reliability. Topdog also automatically assigns a unique ID to every installation (or house), so there's no chance of interference from neighboring installations, even in multiresidential buildings. Distributed Intelligence The power is in the network this is the key to understanding Miro s superiority over centrally-wired lighting control systems. With a Wireless Miro system, there s no expensive central panel, no control wiring at all. Users can keep adding to a Miro network over time. Lowest Installed Cost Miro has no control wiring and can be configured and set up by any electrician or integrator. Since there s no reason for factory technicians to visit the site, Miro is easily the lowest total cost, feature-forfeature, when compared with traditional wired systems. Scene Controllers Power Devices Key Fob Dimmer Fan Controller Scene Wall Mount Controller Scene Remote Switch 64 72 88 92 98 102 104 106 Tune Volume Lamp Module Appliance Module Touch Screen Scene Controllers communicate with power devices through RF control no communication wiring required. 11

Watt Stopper/Legrand Resources & Tools CAD Resource Center Over 300 CAD drawings from which to choose Wiring diagrams you can place in your own CAD drawings Available at www.wattstopper.com Support & Services Layout and design services Commission and start-up services District managers, trained representatives and experts available to answer all technical questions Continuing Education Courses throughout North America qualify for AIA/CES Health, Safety and Welfare (HSW) credit and NCQLP Lighting Education Units (LEUs) In-person and on-line events Course selection available at www.wattstopper.com Product Selection Guide Compilation of product ordering information, cut sheets, design and application assistance Corporate Headquarters 2800 De La Cruz Blvd. Santa Clara, CA 95050 Tech Support: 800.879.8585 www.wattstopper.com WS-05-20087