Workman Wet/Dry Vacuums Operator s Manual Parts Schematic Workman 0 - Gallon Item #8506-00 Workman 0 - Gallon w/dolly Item #8507-00 Workman 6 - Gallon Item #8505-00 Workman -Gallon Item #8504-00 Betco Corporation. All Rights Reserved 00 Brown Avenue P.O. Box 7 Toledo, Ohio 4607-07 800-777-94 www.betco.com
Workman, 6, & 0-Gallon Wet/Dry Vacuums Table of Contents Technical Information & Safety Page, 4 Preparation & Operation Page 5 After Use & Maintenance Page 5 Part Schematic: Workman -Gallon Page 6, 7 Workman 6-Gallon Page 8, 9 Workman 0-Gallon Page 0, Workman 0-Gallon TP Page, (Metal cart) Betco Corporation 00 Brown Avenue Toledo, OH 4560 www.betco.com
Workman, 6, & 0-Gallon Wet/Dry Vacuums Technical Information Tank Size 8504-00 -Gallon 8505-00 6-Gallon 8506-00 0-Gallon 8507-00 0-Gallon.75 hp (-stage bypass) Vacuum Motor Noise Level 65 db Filtration Cloth Airflow 5 cfm Water Lift 98 Power Cord 50 Transport Dolly Diameter 8504-00 5 8505-00 5.5 8506-00 6 8507-00 0 Height 8504-00.5 8505-00 6 8506-00 0 8507-00 Weight Tool Kit Productivity 8507-00 Workman 0DLY Only 8504-00 6 lbs 8505-00 8 lbs 8506-00 lbs 8507-00 5 lbs Included W/4 Tool:,500 sq. ft./hour Betco Corporation 00 Brown Avenue Toledo, OH 4560 www.betco.com
Workman, 6, & 0-Gallon Wet/Dry Vacuums General Safety Information When using an electrical appliance, basic precautions should always be followed, read all instructions before using.! WARNING! To reduce risk of fire, electric shock, or injury: Do not leave the machine when it is plugged in. Unplug the unit from the outlet when not in use & before servicing. To avoid electric shock, do not expose machine to rain. Store indoors. Do not allow to be used as a toy. Close attention is necessary when used by or near children. Use only as described in this manual. Use only manufacturer s recommended attachments. Do not use with damaged cord or plug. If machine is not working as it should return it to a service center for inspection. Do not pull or carry by cord, use cord as a handle, close a door on a cord, or pull cord around sharp edges or corners. Do not run machine over cord. Keep cord away from heated surfaces. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Do not handle plug or machine with wet hands. Do not put any foreign object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, & anything that may reduce airflow. Keep hair, loose clothing, fingers, & all parts of body away from openings & moving parts. Turn off all controls before unplugging. Do not use in or around flammable or combustible liquids such as gasoline or use in areas where they may be present. Connect to a properly grounded outlet only. See grounding instructions. Grounding Instructions This machine must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor & grounding plug. The plug must be plugged into an appropriate outlet that is properly installed & grounded in accordance with all local codes & ordinances.! DANGER! Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the machine. If plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Replace the plug if the grounding pin is damaged or broken. Extension cords connected to this machine should be gauge, -wire cords with - prong plugs & outlets. DO NOT use extension cords more than 50 feet long. 4 Betco Corporation 00 Brown Avenue Toledo, OH 4560 www.betco.com
Workman, 6, & 0-Gallon Wet/Dry Vacuums Preparation and Operation Unwrap the power cord completely & plug into a properly grounded outlet. For wet pick up remove dry filter assembly. For dry pickup install cloth filter bag. Attach swivel hose connector and hose to tank inlet. Select proper floor tool. Wet squeegee for wet pick up. Dry floor tool for dry pick up. Install selected tool on -bend wand. Turn switch located on vacuum head to on position. You are now ready to begin your cleaning task. After Use Unplug the power cord, starting from the machine wrap the power cord onto the head assembly. Completely empty tank of water and debris. Flush tank and dry with a clean towel. Wipe vacuum head assembly with damp towel. Wipe the entire machine with a clean, damp cloth. Inspect the machine & all accessories for damage. Perform any required maintenance or repairs before storage. Store the machine in a clean, dry place. 5 Betco Corporation 00 Brown Avenue Toledo, OH 4560 www.betco.com
Workman Wet/Dry Vacuum -Gallon View# Betco SKU Cross Ref. Vacuum Head Parts NA 84500 00/5V HEAD Complete Vacuum Head 9 80600 60048GR Handle Motor Top 0 80700 6000 Screw 80800 05 Switch 80900 60046/5-50' 50' Power Cord 804000 60007GR/ Motor Cover Switch Housing 4 80400 6000 Screw 5 80400 40506 Strain Reliever 6 80400 60049GRS Upper Motor Housing Sleeve 7 804400 600 Upper Motor Plate 8 804500 95006 Upper Spacer Ring 9 804600 ALT Spacer 0 & 804700 6007 Motor Gasket (View0& Same Item) 804800 5806/5 Motor 5V 804900 6007GR Bottom Mounting Plate 4 805000 6008 Gasket For Mount Plate 5 80500 704 Float 6 80500 580 Float Cage View# Betco SKU Cross Ref. Tanks and Casters Parts 0 95005/Plas/C Gal Tank 80700 PL06 Plastic Tank Clamps 8000 6004GR Tank Intake Hose Connector 5 00 Gal Tank Caster View# Betco SKU Cross Ref. Filters and Tools 800 406 Bend Steel Wand 84600 9508 Foam Filter For Float 80900 404 Plastic Wand 4 80000 60 Dusting Tool 5 8000 404 Crevice Tool 6 8000 408 Hard Floor Brush Tool 7 88400 400 Vacuum Hose 8 8000 409 Squeegee Tool 7 809900 PL09 Gal Complete Cloth Filter Betco Corporation 00 Brown Avenue Toledo, Ohio 4607-07 800-777-94 www.betco.com 6
4 5 7 6 8 9 4 0 5 6 7 8 9 0 7 4 5 6 0 5 0
Workman Wet/Dry Vacuum 6-Gallon View# Betco SKU Cross Ref. Vacuum Head Parts NA 84500 00/5V HEAD Complete Vacuum Head 9 80600 60048GR Handle Motor Top 0 80700 6000 Screw 80800 05 Switch 80900 60046/5-50' 50' Power Cord 804000 60007GR/ Motor Cover Switch Housing 4 80400 6000 Screw 5 80400 40506 Strain Reliever 6 80400 60049GRS Upper Motor Housing Sleeve 7 804400 600 Upper Motor Plate 8 804500 95006 Upper Spacer Ring 9 804600 ALT Spacer 0 & 804700 6007 Motor Gasket (View0& Same Item) 804800 5806/5 Motor 5V 804900 6007GR Bottom Mounting Plate 4 805000 6008 Gasket For Mount Plate 5 80500 704 Float 6 80500 580 Float Cage View# Betco SKU Cross Ref. Tanks and Casters Parts 0 700/Plas/C 6 Gal Tank 80700 PL06 Plastic Tank Clamps 8000 6004GR Tank Intake Hose Connector 5 00 6 Gal Tank Caster View# Betco SKU Cross Ref. Filters and Tools 800 406 Bend Steel Wand 84600 9508 Foam Filter For Float 80900 404 Plastic Wand 4 80000 60 Dusting Tool 5 8000 404 Crevice Tool 6 8000 408 Hard Floor Brush Tool 7 88400 400 Vacuum Hose 8 8000 409 Squeegee Tool 7 809900 PL09 6 Gal Complete Cloth Filter Betco Corporation 00 Brown Avenue Toledo, Ohio 4607-07 800-777-94 www.betco.com 8
4 5 7 6 8 9 0 4 5 6 7 8 9 0 7 0 4 5 6 4 5
Workman Wet/Dry Vacuum 0-Gallon View# Betco SKU Cross Ref. Vacuum Head Parts NA 84500 00/5V HEAD Complete Vacuum Head 9 80600 60048GR Handle Motor Top 0 80700 6000 Screw 80800 05 Switch 80900 60046/5-50' 50' Power Cord 804000 60007GR/ Motor Cover Switch Housing 4 80400 6000 Screw 5 80400 40506 Strain Reliever 6 80400 60049GRS Upper Motor Housing Sleeve 7 804400 600 Upper Motor Plate 8 804500 95006 Upper Spacer Ring 9 804600 ALT Spacer 0 & 804700 6007 Motor Gasket (View0& Same Item) 804800 5806/5 Motor 5V 804900 6007GR Bottom Mounting Plate 4 805000 6008 Gasket For Mount Plate 5 80500 704 Float 6 80500 580 Float Cage View# Betco SKU Cross Ref. Tanks and Casters Parts 0 808800 60070 0 Gal Tank 808900 6007 Tank Intake Gasket 8000 6004GR Tank Intake Hose Connector 89000 77.04 Caster Nut 4 NA Plastic Tank Base 5 809000 055 0 Gal Caster NA 80700 PL06 Plastic Tank Clamps View# Betco SKU Cross Ref. Filters and Tools 800 406 Bend Steel Wand 84600 9508 Foam Filter For Float 80900 404 Plastic Wand 4 80000 60 Dusting Tool 5 8000 404 Crevice Tool 6 8000 408 Hard Floor Brush Tool 7 88400 400 Vacuum Hose 8 8000 409 Squeegee Tool 7 809900 PL09 0 Gal Complete Cloth Filter Betco Corporation 00 Brown Avenue Toledo, Ohio 4607-07 -800-777-94 www.betco.com 0
4 5 7 6 8 9 0 4 5 6 7 8 9 0 7 0 4 5 6 4 5
Workman Wet/Dry Vacuum 0-Gallon Tip Pour Metal Cart View# Betco SKU Cross Ref. Vacuum Head Parts NA 84500 00/5V HEAD Complete Vacuum Head 9 80600 60048GR Handle Motor Top 0 80700 6000 Screw 80800 05 Switch 80900 60046/5-50' 50' Power Cord 804000 60007GR/ Motor Cover Switch Housing 4 80400 6000 Screw 5 80400 40506 Strain Reliever 6 80400 60049GRS Upper Motor Housing Sleeve 7 804400 600 Upper Motor Plate 8 804500 95006 Upper Spacer Ring 9 804600 ALT Spacer 0 & 804700 6007 Motor Gasket (View0& Same Item) 804800 5806/5 Motor 5V 804900 6007GR Bottom Mounting Plate 4 805000 6008 Gasket For Mount Plate 5 80500 704 Float 6 80500 580 Float Cage View# Betco SKU Cross Ref. Tanks and Casters Parts 0 808800 60070 0 Gal Tip Pour Tank 808900 6007 Tank Intake Gasket 8000 6004GR Tank Intake Hose Connector 8900 77.04 Caster Nut 4 NA 60.5 Rubber Bumper 5 80900 055 0 Gal Tip Pour Front Caster 7 NA 58.05 0 Gal Tip Pour Rear Wheel 8 NA 58.074 0 Gal Tip Pour Cart Assembly 40 NA 58.07 Tank Mounting Bracket 4 NA 0.57 Tank Mounting Bolt 4 NA 58.005 Washer 4 NA 90.09 Washer NA 80700 PL06 Plastic Tank Clamps NA NA NA 0 Gal Tip Pour Tank Handle View# Betco SKU Cross Ref. Filters and Tools 800 406 Bend Steel Wand 84600 9508 Foam Filter For Float 80900 404 Plastic Wand 4 80000 60 Dusting Tool 5 8000 404 Crevice Tool 6 8000 408 Hard Floor Brush Tool 7 88400 400 Vacuum Hose 8 8000 409 Squeegee Tool 8 809900 PL09 0 Gal Complete Cloth Filter NA 80600 NA Front Mount Squeegee Assembly Betco Corporation 00 Brown Avenue Toledo, Ohio 4607-07 -800-777-94 www.betco.com
0 0 0 0 9 8 5 4 7 6 7 7 5 5 4 4 0 0 0 0 9 9 9 9 8 8 8 8 7 7 6 6 6 6 5 5 4 4 6 6 5 5 4 4 6 6 8 8 9 9 40 40 4 4 4 4 4 4 7 7 44 44