Warehouses, factories, and other industrial facilities have always relied on high bay lighting to provide bright light to large spaces. Now, ASD offers an all-in-one solution to these lighting applications. The LED Linear High Bay fixtures provide high quality, bright light while cutting out the maintenance costs of lamp and ballast replacements. Optional wire guards are available to ensure added safety. Various mounting option and optical sensors are also available. Suitable for suspension by rope, surface-mounting (bracket sold separate), pole mounting (bracket sold separate). FEATURES AND BENEFITS: -1V Dimming standard Wire guard available for additional protection Optional Motion sensors available High efficiency 13 lm/w and up Low energy consumption Resistant to high and low temperatures Suspended luminaire L-7 Life > 15, hrs culus certified DesignLights Consortium (DLC) listed (Classification: Premium) 5-year limited warranty 13 HIGH LUMINOUS EFFICIENCY ORDERING MATRIX: Family Size Watts Dimmable CCT Finish Series Motion Sensor ASD-WHB X XX D XX W PRM MS LED Linear High Bay = ft 11 = 11 W Dimmable 5, K White PRM = Premium HV = ft and 15 = 15 W high voltage 17 = 17 W 4 = 4 W LED LINEAR HIGH BAY: Model Size Watts Dimming Compatible CCT Lumens Dimensions (LxWxH) ASD-WHB-11D5W-PRM ft 11 W YES 5, K 15,575 lm 3 5/8" x 1 5/8" x 5/8" ASD-WHB-11D5W-MS-PRM ft 11 W YES 5, K 15,575 lm 3 5/8" x 1 5/8" x 5/8" ASD-WHBHV-15D5W-PRM ft 15 W YES 5, K,91 lm 3 5/8" x 1 5/8" x 5/8" ASD-WHB-17D5W-PRM ft 17 W YES 5, K,86 lm 3 5/8" x 1 5/8" x 5/8" ASD-WHB-17D5W-MS-PRM ft 17 W YES 5, K,86 lm 3 5/8" x 1 5/8" x 5/8" ASD-WHB-4D5W-PRM ft 4 W YES 5, K 31,7 lm 3 5/8" x 1 5/8" x 5/8" ASD-WHB-4D5W-MS-PRM ft 4 W YES 5, K 31,7 lm 3 5/8" x 1 5/8" x 5/8" ASD-WHBHV-4D5W-PRM ft 4 W YES 5, K 31,7 lm 3 5/8" x 1 5/8" x 5/8"
PRODUCT SPECIFICATIONS: Construction & Materials Housing Die cast Aluminum Finish White Weight ASD-WHB-11D5W-PRM 1.5 lb (4.8 kg) ASD-WHB-17D5W-MS-PRM 11. lb (5.1 kg) ASD-WHB-11D5W-MS-PRM 11 lb (5 kg) ASD-WHB-4D5W-PRM 11 lb (5 kg) ASD-WHBHV-15D5W-PRM ASD-WHB-4D5W-MS-PRM 11.8 lb (5.4 kg) ASD-WHB-17D5W-PRM 1.7 lb (4.9 kg) ASD-WHBHV-4D5W-PRM 11. lb (5.1 kg) Environmental System Work Environment Suitable for Damp Locations, IP Operating Temperature -4 to 131 (- to 55 ) L-7 Life > 15, hrs Optical System Luminous Flux ASD-WHB-11D5W-PRM 15,575 lm ASD-WHB-17D5W-MS-PRM,86 lm ASD-WHB-11D5W-MS-PRM ASD-WHB-4D5W-PRM 31,7 lm ASD-WHBHV-15D5W-PRM,91 lm ASD-WHB-4D5W-MS-PRM ASD-WHB-17D5W-PRM,86 lm ASD-WHBHV-4D5W-PRM Color Temperature 5, K CRI >75 Electrical System Input Voltage Voltage 1~77VAC 5/6 Hz High voltage 18~58VAC 5/6 Hz Max input current ASD-WHB-11D5W-PRM 1. A ASD-WHB-17D5W-MS-PRM.1 A ASD-WHB-11D5W-MS-PRM ASD-WHB-4D5W-PRM.6 A ASD-WHBHV-15D5W-PRM.8 A ASD-WHB-4D5W-MS-PRM ASD-WHB-17D5W-PRM.1 A ASD-WHBHV-4D5W-PRM.8 A Inrush current ASD-WHB-11D5W-PRM 6 A ASD-WHB-17D5W-MS-PRM 6 A ASD-WHB-11D5W-MS-PRM ASD-WHB-4D5W-PRM 8 A ASD-WHBHV-15D5W-PRM 35 A ASD-WHB-4D5W-MS-PRM ASD-WHB-17D5W-PRM 6 A ASD-WHBHV-4D5W-PRM 5 A Action time (Inrush current).3 ms AC input range Voltage min 1 V max 77 V High voltage min V max 48 V Off State Power W Power Consumption ASD-WHB-11D5W-PRM 11 W ASD-WHB-17D5W-MS-PRM 17 W ASD-WHB-11D5W-MS-PRM ASD-WHB-4D5W-PRM 4 W ASD-WHBHV-15D5W-PRM 15 W ASD-WHB-4D5W-MS-PRM ASD-WHB-17D5W-PRM 17 W ASD-WHBHV-4D5W-PRM Power Factor.9 Output voltage ASD-WHB-11D5W-PRM 36-48 V ASD-WHB-17D5W-MS-PRM 36-48 V ASD-WHB-11D5W-MS-PRM ASD-WHB-4D5W-PRM 4-54 V ASD-WHBHV-15D5W-PRM 4-54 V ASD-WHB-4D5W-MS-PRM ASD-WHB-17D5W-PRM 36-48 V ASD-WHBHV-4D5W-PRM Max output current ASD-WHB-11D5W-PRM.37 A ASD-WHB-17D5W-MS-PRM 3.68 A ASD-WHB-11D5W-MS-PRM ASD-WHB-4D5W-PRM 5 A ASD-WHBHV-15D5W-PRM.8A ASD-WHB-4D5W-MS-PRM ASD-WHB-17D5W-PRM 3.68 A ASD-WHBHV-4D5W-PRM LED driver class Class 1 Regular and Voluntary Certifications 5-year limited warranty culus certified E47384 DesignLights Consortium (DLC) listed (Classification: Premium) The LED Linear High Bay is designed to install as a surface mounted luminaire.
5/8 (66 mm) 3 5/8 (6 mm) 1 5/8" (3 mm) 11 W 15 W LIGHT DISTRIBUTION CURVE UNIT:CD C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 1 LIGHT DISTRIBUTION CURVE UNIT:CD C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 14 3-15 -/+18 15 18-15 -/+18 15 4 5-1 1 6-1 1 6 3 7-9 9 34-9 9 8 1 38 16 9-6 4 36 48 6 4 46-6 3 48 64 6 1 11-3 6 3 UNIT:cd C/18,15.8 C3/1,15. C6/4,14.1 C9/7,14.6 AVERAGE BEAM ANGLE(5%):14.9 DEG 5. 17. 34. 36. 3. 4. 18. 1. 6. 4.8 3..4 1.8 S(m) -3 8 3 UNIT:cd C/18 5.1,53.8 C9/7 5.5,53. AVERAGE BEAM ANGLE(5%):15.8 DEG 1. 4.5 9. 11 94 75 56 38 19 15 94. 75. 56. S(m) 17 W 4 W LIGHT DISTRIBUTION CURVE UNIT:CD C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 1 LIGHT DISTRIBUTION CURVE UNIT:CD C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 1 14 14-15 -/+18 15 18-15 -/+18 15 18-1 1 6-1 1 6 3 3-9 9 34-9 9 34 18 38 3 38-6 36 54 7 6 4 46-6 6 9 1 6 4 46-3 9 3 UNIT:cd C/18,15.9 C3/1,15. C6/4,14. C9/7,14.8 AVERAGE BEAM ANGLE(5%):15. DEG 5. 17. 34. 54. 45. 36. 7. 18. 9. 7. 4.5 3.6.7 S(m) -3 15 3 UNIT:cd C/18,16. C3/1,15.9 C6/4,15.1 C9/7,16. AVERAGE BEAM ANGLE(5%):15.7 DEG 5. 17. 34. 71. 6. 48. 36. 4. 1. 9.5 6. 4.8 3.6 S(m)
PACKAGE CONTENTS: Description Q-ty LED Linear High Bay Fixture 1 Rope accessories (A) 1 Box 1 Installation Instructions 3 A ELECTRICAL SCHEMATIC DIAGRAM DIMMABLE ELECTRICAL SCHEMATIC DIAGRAM DIMMABLE MOTION SENSOR FIXTURE FIXTURE Power connector 1~77V 5/6 Hz L N G L (live/hot) connect black N (neutral) connect white Ground connect green L N DRIVER Dim + (Violet) Dim - (Gray) Power connector 1~77V 5/6 Hz L N G L (live/hot) connect black N (neutral) connect white Ground connect green MOTION SENSOR Dim + (Violet) Dim - (Gray) L N DRIVER WARNING RISK OF PERSONAL INJURY READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum 9 С supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.
ASD LIGHTING MOTION SENSING FEATURES AND INSTRUCTION MERRYTEK MC61V Microwave technology allows for active motion sensing regardless of background temperature or line of sight issues Motion easily detected through plastic, glass and other thin non-metal material Sensors are completely contained within the enclosure for IP65 rating 1-1 V interface allows for multiple dimming levels and functionality (see below) Integral daylight sensor allows light activation at defined brightness threshold Precise daylight thresholds, time delays and detection areas set via DIP switch (see sensor settings) Dimming Function: 3 Step 1% Low Light - Off Situation Sufficient Light Insufficient light and motion After hold time No further motion After standby period Light status OFF ON-1% Low Light Off Dimming Function: Step 1% Low Light Situation No Motion Motion After hold up time No further motion Light Status LOW LIGHT On 1% Low Light Note: step dimming requires that daylight sensor be set to disable mode. Motion Sensor Specifications Operating voltage 1~77VAC, 5HZ/6HZ Rated capacitive load 1V@4W;-4V@8W;77V@1W HF system 5.8GHz±75MHz, ISM wave band Transmitting power <.5mW Power consum ption.5w(standby), <1W(operation) Detection zone Max.(D x H): 5,5ft x 5 ft Detection sensitivity 1% / 5% / 75% / 1% Hold time 5s / 3s / 9s / 3min / min / + Daylight sensor lux/5lux / 1lux / 5lux /5lux / 1lux / Disable Stand-by period s /5s / 5min / 1min / 3min / 1h / + Stand-by dimming level 1% / % / 3% / 5% Motion detection.5~3m/s Detection angle 15 (wall installation), 36 (ceiling installation) Operating temperature -31~158 F (-35 ~7 ) IP rating IP
Sensor Settings: Use the following DIP switch settings to set dimming levels, hold times, standby periods, detection area and daylight sensor mode. By selecting the combination switches to reach the desired sensor settings. Each switch will indicate ON when moved UP. 1 I ON ON 1% II ON - 75% III - ON 5% IV - - 1% 3 4 5 I ON ON ON 5s II - ON ON 3s III ON - ON 9s IV - - ON 3min V ON ON - min VI - - - + 6 7 8 I ON ON ON S II - ON ON 5S III ON - ON 5min IV - - ON 1min V ON ON - 3min VI - ON - 1h VII - - - + 1 3 4 I - - ON ON lux II - - - ON 5lux III - ON ON - 1lux IV - - ON - 5lux V - ON - - 5lux VI ON - - - 1lux VII - - - - Disable 1 I ON ON 5% II - ON 3% III ON - % IV - - 1% Detection Area Reduce detection area by selecting these switch combinations. Hold Time Refers to the time the lamp remains at 1% after no further motion is detected Stand by Period Refers to the time the light stays on at low light level before it shuts completely off in the long absence of motion. Daylight sensor switch must be enabled Daylight Sensor The sensor can be set to allow for illumination at a desired brightness. When set to disable mode, the daylight sensor will turn on the light when there is motion regardless of the ambient light level 1 lux, 5 lux: for darkness operation only. Stand by Dimming Period This is the low light level after the hold time in the long absence of motion Note: the sensor is only active when the light is totally off.
INSTALLATION GUIDE IMPORTANT SAFETY INFORMATION: Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes. If the product is damaged, do not use it. 1.. ROPE MOUNT 1. Fix the lifting rope on the rail. 3.. Fix the fixture on the lifting rope. Adjust the rope length accordingly. 3. Use the screwdriver to open the plate. 4. Wiring: No sensor fixture Connect black wire to line (hot), white wire to neutral, and green to ground. If dimming required, use the provided dimming leads (Dim+ and Dim- leads). If dimming is not required, leave caps on dimming leads. Fixture with sensor Adjust the sensor settings, and then connect black wire to line (hot), white wire to neutral, and green to ground. 5. Screw the plate back. 4. 5. 1
MOUNTING BRACKET (SOLD SEPARATE) 1.. ASD mounting bracket allows easy 3/4» NPT Installation and surface mounting installation. 1 Bracket do not include nut or screw for mounting to surface. POLE MOUNT 1. Install the mounting bracket on ¾ NPT pole by customer supplied locknuts. 3.. Screw bracket parts to the fixture than install the fixture on the main bracket. 3. Use the screwdriver to open the plate. 4. Wiring: No sensor fixture Connect black wire to line (hot), white wire to neutral, and green to ground. If dimming required, use the provided dimming leads (Dim+ and Dim- leads). If dimming is not required, leave caps on dimming leads. Fixture with sensor Adjust the sensor settings, and then connect black wire to line (hot), white wire to neutral, and green to ground. 5. Screw the plate back. 4. 5. 1
SURFACE MOUNT 1. Install the bracket on the iron frame or ceiling by customer supplied screw, nuts and other tools.. Screw two bracket parts to the fixture. 3. Install the fixture on the main bracket. 4. Use the screwdriver to open the plate. 5. Wiring: No sensor fixture 1.. Ceiling Connect black wire to line (hot), white wire to neutral, and green to ground. If dimming required, use the provided dimming leads (Dim+ and Dim- leads). If dimming is not required, leave caps on dimming leads. Fixture with sensor 3. Ceiling Adjust the sensor settings, and then connect black wire to line (hot), white wire to neutral, and green to ground. 6. Screw the plate back. 1 WIRE GUARD INSTALL 4. 1 5. MOTION SENSOR SETTINGS Please follow the additional motion sensor manual to setup your motion sensor.
ORDERING INFORMATION LED LINEAR HIGH-BAY FIXTURE ORDERING INFORMATION: Model Size Watts UPC Product Code Pcs in one Carton Carton Size Carton Weight ASD-WHB-11D5W-PRM ft 11 W 81911741 3.44 1 5.6" x 15.35" x 5.5" 13.64 lbs ASD-WHB-11D5W-MS-PRM ft 11 W 81911789 3.48 1 5.6" x 15.35" x 5.5" 14.8 lbs ASD-WHBHV-15D5W-PRM ft 15 W 81911 3.43 1 5.59" x 15.16" x 5.3" 14.8 lbs ASD-WHB-17D5W-PRM ft 17 W 81911758 3.45 1 5.6" x 15.35" x 5.5" 13.86 lbs ASD-WHB-17D5W-MS-PRM ft 17 W 81911796 3.49 1 5.6" x 15.35" x 5.5" 14.3 lbs ASD-WHB-4D5W-PRM ft 4 W 81911765 3.46 1 5.6" x 15.35" x 5.5" 14.3 lbs ASD-WHB-4D5W-MS-PRM ft 4 W 819143 3.433 1 5.6" x 15.35" x 5.5" 14.96 lbs ASD-WHBHV-4D5W-PRM ft 4 W 8191177 3.47 1 5.6" x 15.35" x 5.5" 14.5 lbs WIRE GUARD ORDERING INFORMATION: Model Materials Weight Dimensions ASD-GWHB Steel wire and metal clips Pcs in one Carton Carton Size Carton Weight.66 lbs (.3 kg) 3 3/16" x 1 13/16" x 1 7/8" 1 4.4" х 13.4" х 1." 9.4 lbs Model UPC GTIN 14 Product Code ASD-GWHB 81911918 181911915 3.43 BRACKET FOR PENDANT STEM AND SURFACE MOUNTING ORDERING INFORMATION: Model Materials Weight Dimensions Pcs in one Carton Carton Size Carton Weight ASD-PSMB-WHB Steel.9 lbs (.95 kg) 9 1/16" x 6 5/16" x 13/16" 1 19.68" x 11." x 6.89" 7.5 lbs Model UPC GTIN 14 Product Code ASD-PSMB-WHB 8191195 1819119 3.431