Emissions monitoring solutions
2 Benefits and compliance FLSmidth AFT offers monitoring and control solutions for baghouses and cartridge dust collectors. These products are essential solutions for optimum process control and meeting EPA regulations. Benefits include improved differential pressure and airflow control, preventing particulate emissions, reduced maintenance costs, protecting downstream equipment, lowering energy use and preventing unforeseen downtime.
3 Baghouse analyzer and controller Applications - Cement - Power - Smelting - Steel - Chemicals and plastics - Pharmaceuticals and food - Carbon black - Minerals - Lead battery Baghouse Performance Analyzer and Controller incorporates IntelliPULSE intelligent pressure control technology to control filter differential pressure within +/- 0.1 WC while pulsing as little as possible extending filter life and lowering compressed air use. B-PACs also offers diagnostics to indicate failed individual solenoids (short or open), failed individual diaphragms (leaking or ruptured, stuck open or closed) and filter leakage by row for locating leaks and preventing PM from exceeding compliance levels. Modular design enables configuring systems for single and multi-compartment baghouses. B-PAC installation
4 Multi-channel particulate monitor Features and benefits - Flexible, modular, expandable design - Ideal for multi-compartment filters - Detect leaks and monitor efficiency - Plan maintenance, maintain compliance Single or Multi-Channel particulate monitoring system built on a modular system that enables a choice of basic particulate monitoring/ filter leak detection or optional high accuracy low level particulate monitoring and filter leak analysis with zero and span checks for EPA compliance. Modular design also facilitates options for a full range of fieldbus communications, internal data logging and a wide range of modular relay and analog I/O. PM 100 installation
5 Single point particulate monitors Features and benefits EM 30 LGX - Advanced induction sensing - Detects leaks before visible emissions - Ultra reliable protected probe - Prevent the escape of valuable powders - Protect downstream equipment - Superior to traditional triboelectric - Simple, low cost 2 wire installation - Prevent emissions - Plan filter maintenance EM 30T EM 30LGX is a single point particulate monitor and filter leak detector in a 2-piece configuration with a control unit and remote sensor. The control unit provides a local display, dual alarm contacts and optional 4-20mA output. The remote sensor is free of active electronics providing inherent reliability and long life. The 2-piece design is also beneficial for hard to access sensor location and facilitates the optional intrinsically safe version. EM 30 LGX and EM 30T installation EM 30T is a single point particulate monitor and filter leak detector in a 2-wire loop powered transmitter configuration. The loop-powered design with 4-20mA output is ideal for direct connection to PLCs and data loggers. Single piece mounting provides simple installation.
6 Pressure transmitters Features and benefits - Non-Clogging Design - Durable Ceramic Diaphragm - Tri-Clamp Mounting - 2-Wire Loop Power Pressure Transmitters are heavyduty, low-pressure sensors for monitoring and controlling fabric filters, VOC abatement filters, and powder processing applications, ventilation systems and any process with high particulate. The ability to transmit accurate measurements below 10 W.C., over a broad temperature range while preventing clogging, make these transmitters ideal replacements for mechanical gauges and electronic sensors that use small tubes that can easily clog. DP 20T and SP 20T installation
7 Pulse-jet timer Features and benefits - Lower energy use by 15-90% - Control differential pressure - Optimize filter cake - Control air flow - Extend filter life up to 50% The IP 100 is a high quality pulse timer in a modular DIN rail design. All traditional pulse cleaning modes and IntelliPULSE mode are provided. Operate as a standalone timer or integrate with PLCs using either PLC discrete input control or choose from the wide range of field bus communications available. Contact us today for more information Tel: +1 706 228 3382 Toll free: 888 440 8884 Mail: info.aft@flsmidth.com IP 100 installation
LEARN MORE AND CONTACT FLSMIDTH AFT FOR MORE INFORMATION ON EMISSIONS MONITORING SOLUTIONS. TOLL FREE: 800 440-8884 Copyright 2014 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (registered) trademark of FLSmidth A/S. This brochure makes no offers, representations or warranties (express or implied), and information and data contained in this brochure are for general reference only and may change at any time. B-PAC and IntelliPULSE are registered trademarks of FilterSense, Inc. www.flsmidth.com/aft CM 06-14 200-37-ENG FLSmidth AFT 715 North Belair Rd Evans, GA 30907 Tel: (706) 228-3382 Toll Free: 1 (888) 440-8884 Fax: (706) 228-1806 E-mail: info.aft@flsmidth.com Project Centre Denmark FLSmidth A/S Ramsingsvej 30 DK-2500 Valby Copenhagen Tel: +45 3618 2000 Fax: +45 3618 2030 E-mail: info@flsairtech.com Project Centre India FLSmidth Private Limited FLSmidth House 34, Egatoor, Kelambakkam (Rajiv Gandhi Salai, Chennai) Tamil Nadu 603 103 Tel: +91-44-4748 1000 Fax: +91-44-2747 0301 E-mail: salesairtech-in@flsmidth.com