Muti-ayered Intrusion Detection For perimeter, site, peope and asset protection www.optex-europe.com UPDATED 09/18
Muti-ayered protection for an earier aarm and a better response For critica infrastructure, government faciities and miitary instaations that require the very highest eves of security as we as industria sites and commercia premises, product performance and reiabiity are key, as is a strategic approach to perimeter protection. For neary 40 years, OPTEX has been trusted by thousands of customers wordwide for the accuracy and reiabiity of its detection systems and its abiity to deveop new sensing technoogies. Roof protection Remote monitoring centre Window protection Interior protection Buiding protection Security Room Perimeter protection Outer perimeter protection Approach protection Fence & wa protection OPTEX CO., Ltd. A rights reserved. Detection is the corner stone of the security system Detection is usuay the first step in an event driven security system: something or someone is entering a secured area and this wi trigger a number of events or responses. OPTEX has become a eader in its fied thanks to its experience in sensing technoogies and its muti-ayered approach to security. It has deveoped a wide range of detection systems that can protect any type of perimeters, sites or buidings and integrate easiy with the wider security system. Earier detection for a better response Whatever the need and whatever the environment, OPTEX understands that the earier security personne are aerted to a threat, the better they can respond and the better the outcome for a concerned. Accurate detection for a more efficient security system As its sensors act as a trigger for CCTV or wider security systems, OPTEX understands it is paramount that its soutions give accurate information. OPTEX detectors have been specificay designed to work in conjunction with CCTV systems, and trigger cameras to point where the incidents occur, enabing visua verification and prompt an effective response. They provide the highest performance and can distinguish between a genuine intrusion from an activation triggered by a disturbance created by changes in the environment, sma animas or vibration. Exampe of event driven IP CCTV system using OPTEX s REDWALL IP sensors Aarm sent to the VMS Light and camera preset position activated
Layers of detection to suit the site requirement A number of criteria shoud be taken into account in order to design the most efficient perimeter protection system, such as environment, ighting conditions, site ay-out, technica requirement, acceptabe eve of fase aarms etc. Different sensing technoogies suit different types of appications and environmenta conditions and it is quite common to see that a combination of technoogies is needed to achieve best resuts. OPTEX provides a wide range of sensing technoogies designed for perimeter protection, in fied detection and critica buidings or assets or areas protection. Ranging from passive infrared to active infra-red, microwave, aser and fibre optics, the choice of technoogies gives great fexibiity to design a reiabe security system matching the customer s requirements. Perimeter and buiding protection The first ayer of security usuay occurs at the perimeter, whether that is a physica ine such as a fence or a wa or a virtua ine. A number of options are avaiabe to protect the boundaries of a site or buiding; virtua trip wires or was can be created or the wa or fence can be protected by a sensing system to detect any attempt to breach through or above it. Perimeter Security Facade Protection Virtua trip wire using active infrared beams Active infrared beams create a virtua ine and trigger the aarm if the ine has been breached. This is very we suited for open perimeter, without any physica perimeter ine, fence or wa, or as an additiona eve of security if peope have cimbed over the gate, wa or fence. One set of beams can cover areas as sma as 20m up to 200m. Virtua was using aser technoogy OPTEX s Laser Sensor can be mounted verticay to create a curtain detection that can act as a virtua wa or detect objects or peope approaching the physica perimeter ine by covering 1 or 2m of the perimeter ine. For facade protection, the inteigent sensor can detect anyone trying to break in throw windows, or trying to vandaise was (graffiti) as we as detecting objects being thrown out of windows. Sensing intrusion through fence of wa Fences and was surrounding a business or safety critica sites are a good deterrent, but they can be easiy compromised. OPTEX Fiber SenSys fibre-optic detection systems use sophisticated agorithms to detect intruders who are attempting to cimb over or cut through the perimeter ine. The fibre-optic cabe used has been designed to the highest security rating and the system provides a very ong asting performance with ow cost of ownership. Aarm Processing Unit Camera Fibre optic cabe sensor In fied intrusion detection Once an intruder has penetrated an area it is critica to track his whereabouts and foow him using PTZ cameras. PTZ By utiizing contro the is enabed mutipe outputs, using the pan/tit/zoom sensor s contro mutipe is outputs enabed Camera Top view SIP-100 Far zone Near zone Creep zone Voumetric detection OPTEX s 3D therma sensors have been designed to work in conjunction with CCTV cameras and triggers preset views to enabe an efficient visua verification. In some instances, in order to eiminate risk of fase aarms, dua technoogy sensors providing passive infrared and micro-wave technoogy, coud be recommended. Customised area detection OPTEX s aser sensor, REDSCAN, when set-up horizontay wi scan the detection area for any objects and transmits ive X & Y coordinates and the size of the objects detected. The REDSCAN is highy customisabe and the specific areas can be masked to avoid triggering fase aarms. Protecting specia assets Being a unique piece of art, tanks of hazardous substance, or areas containing critica information, some assets require protection to the highest eve of security. OPTEX Laser sensor, REDSCAN is ideay suited to protect assets indoor or outdoor by providing highy customisabe detection area and great detection accuracy.
Seamess integration with video surveiance systems to improve security Easy integration with CCTV systems REDWALL sensors from OPTEX have been designed for professiona video surveiance systems, to make them more efficient and point the cameras where the intrusion or event is occurring. Integration with anaogue CCTV systems Anaogue Redwa sensors can be pugged directy to any anaogue cameras or DVR using their reay output. Integration with Video Management Software patforms The REDWALL IP range provides a arge number of IP motion detectors and inteigent sensors, which can be connected to the network via Power-over-Ethernet (PoE) and exchange aarm signa information via OPTEX unique IP protoco. This protoco has aready been integrated with the the major Video Management Software (VMS) manufacturers.* Anaogue or IP camera Direct integration to VMS patforms PoE switch REDWALL SIP-IP Outdoor PIRs REDSCAN series Indoor / outdoor Laser sensors IP beams (using IP encoder) Fibre optic fence sensors (with IP modue) This schematic is a simpified representation of the sensors and their detection areas and not to be used as technica specifications. Benefits of integrating physica sensors onto a video based security system Athough intrusion detection can be achieved by video based soutions, there are situations where a combination of video anaytics and physica sensors improves significanty the reiabiity of the detection and minimises the probem of fase aarms; and other situations where physica sensors are much better suited. Increased reiabiity of detection Insects, spider webs, sudden ights, refection and shadows can affect video based detection and trigger unwanted aarms. Physica sensors are not affected by ow ight conditions or shadows; and argey not affected by gare. They can be used as an aternative to video anaytics detection or as a doube knock system. Physica sensors hep reduce the risk of fase aarms affecting video detection systems. Appications where video detection is not suited Vertica detection There are a number of appications where a virtua wa is required to protect an area: this coud be for facade protection or perimeter protection with a very narrow sterie zone etc. For those appications, it is difficut to depoy video based detection systems. Thrown object detection It is extremey difficut for video surveiance system to detect objects being thrown into or over a protected area, even more so if the object is sma. Now, with the atest in aser sensing technoogy this requirement can be achieved. *To earn more about the integration of OPTEX REDWALL IP sensors with VMS patforms, pease visit our dedicated website www.optex-vms.com
Perimeter protection using active infrared beams Active infrared beams consist of a pair of transmitter and receiver units to provide a detection ine simiar to a trip wire or a virtua wa. The transmitter unit constanty emits infrared beams to the receiver and wi trigger an aarm if the transmission is broken by an intruder. OPTEX s Quad beam technoogy For industria or critica infrastructure appications, OPTEX provides its newest QUAD beam active infrared sensors, that are avaiabe in wired, wireess or IP version. A modes can be stacked in beam towers which offer extra fexibiity in terms of system design. The advantage of using Quad beams is to reduce fase aarms caused by fying birds or faing eaves. Twin beams bocked by a bird can trigger a fase aarm With Quad beams, ony the upper beams are bocked, no aarm triggered Key features for a OPTEX Quad beams n High quaity aspherica enses n Easy optica aignment with Sniper viewfinder (2 x magnification) n IP65 water proof housing Sniper Viewfinder provides a magnifying gass to ease the optica aignment Wired or IP/PoE beams Smart-Line SL-QDM series The SL-QDM series is a range of high specifications short and ong range wired active infrared beams that have been designed to sustain harsh environmenta conditions and ensure optima communication between transmitter and receiver. They can be stacked in towers to create a virtua perimeter. When use in conjunction with our IP modue PiE-1, the beams can be powered over Ethernet and the aarm events can be transmitted via the network directy to many VMS and PSIM patforms that have integrated OPTEX Redwa event code. n 60, 100 and 200m detection range n 4 channe seectabe frequency n Dua moduation n Dynamic power adjustment between transmitter and receiver n PoE compiant when used with PiE-1 IP encoder n Supported protocos IPv4, ARP, UDCP, TCP, ICMP, HTTP with PiE-1 encoder Wireess Smart Line QFR and QNR series Ideay suited to protect remote ocations or areas difficut to wire, the Smart Line QFR and QNR series provides a 100m perimeter protection that is competey wirefree, reducing the instaation time and cost to a minimum. The battery operated sensors can accommodate most wireess transmitters avaiabe in the market, or OPTEX can provide beams with pre-fitted wireess transmitters. n 100m detection range n Battery operated n 4 years battery ife (with SAFT batteries) n 4 channe seectabe frequency (SL-QFR ony) Pre-buit beam towers When there is the need to stack beams to create a virtua wa protection or insta them back to back, the sensors wi need to be mounted in speciay designed tower encosures. OPTEX can provide a arge range of free standing or wa mounted beam towers ranging from 50cm, to 3m high featuring a number of usefu options such as ight and camera housing on top of the tower. To simpify the instaation on site, OPTEX can pre-buid the towers with the seected beam modes, a the necessary brackets, cabes, heaters and tamper switches.
Perimeter intrusion detection using fibre-optic sensors Harnessing the atest fibre-optic technoogy with the abiity to be mounted on fences and on was Fiber SenSys systems use advanced signa processing to detect intruders attempting to cimb over, craw under, or cut through a perimeter ine. These inteigent sensors are abe to distinguish between genuine intruders and nuisance aarms caused by wind, sma animas or environmenta conditions. Unike metaic (coaxia) sensors, the advanced fibre-optic sensing is unaffected by harsh conditions, incuding EMI and RFI, corrosion and even ightning strikes. With an option to depoy a the eectronics far away from the perimeter, it is possibe to protect sites with intrinsic requirements as the fibre-optic cabe does not contain energy that coud cause exposions. As the eectronics can be mounted indoors, even environments with harsh temperatures can be protected. FD322 Dua channe Aarm Processing Unit (APU) for fence protection Sensor Cabe Aarm Processing Unit (APU) ZONE 1 ZONE 2 n Dua zone APU for fence protection n Supports up to 500m sensing cabe per zone n Competitivey priced n Easy to insta, free web based training avaiabe n 6+ configuration parameters to ensure high performance n Idea for industria, retai and commercia environments FD331/FD332 Singe or dua channe APU for fence or wa protection Sensor Cabe ZONE 1 Aarm Processing Unit (APU) n Singe (FD331) or Dua (FD332) zone APU n For fence and wa appications n Supports up to sensing cabe per zone n Highy adjustabe: 25+ configuration parameters n Idea for high-security appications FD341/FD342 Singe or dua channe remote-capabe APU for fence and wa protection ZONE 1 Sensor Cabe Insensitive Cabes Aarm Processing Unit (APU) n Singe (FD341), Dua zone (FD342) APU n For fence and wa appications n The APU can be ocated remotey from the zone to be protected (up to 20km) n Supports up to sensing cabe per zone n Sensor cabe is unaffected by EMI, RFI, ightning or proximity to eectrica cabes. n Highy adjustabe: 25+ configuration parameters n Idea for high-security appications requiring no eectronics in the fied FD348 Singe channe remote-capabe APU card to insert into a rack for fence and wa protection ZONE 1 Sensor Cabe Junction Box Insensitive Cabes Rack & Aarm Processing Unit (APU) n Singe zone APU card (FD348R) n For fence and wa appications n The APU card fits in a sub-rack (RK-348) that hods a maximum of 8 APUs n RK-348 takes 4U space in a standard 19 inch rack n The RK-348 rack is ocated remotey from the zone to be protected (up to 20km) n Supports up to sensing cabe per zone FD508 Eight channe remote-capabe rack-mounted APU for fence and wa protection FD508 APU Insensitive Lead-in Cabe Sensor Cabe Sensor Zone Length Junction Box Insensitive Cabes To Other Zones ZONE 1 ZONE 2 ZONE 3 Sensor Cabe Backbone Cabe Length Rack & Aarm Processing Unit (APU) n Up to eight zone rack-mounted APU n Designed for standard 19 inch equipment racks n For fence and wa appications n The APU is ocated remotey from the zone to be protected (up to ) n Up to 800m sensing cabe per zone n Highy adjustabe: 25+ configuration parameters The schematics above are simpified representations and shoudn t be considered as technica specifications.
FD525 Hao 25 Channe Remote-capabe Rack-mounted APU for fence protection Rack & APUs Insensitive Lead-in Cabe Sensor Zone Length To Other Zones ZONE 1 ZONE 2 ZONE 3 Cabe in Cabe out Spitter Box Break-out box Hybrid cabe n A 25-Zone remote capabe APU for fence appications n 25 zone APU n Using hybrid cabe that can be instaed on the fence directy without any conduit n For fence and wa appications n A zones are independent; an intrusion attempt on one zone wi not affect the other zones n The rack-mounted (FD525R) APU can be ocated remotey (from 5 to 12km) n 500m sensing cabe per zone n 30+ configuration parameters n Idea for high-security appications such as refineries, chemica faciities and industria compexes FD525 / FD525R A 25-Zone Stand Aone (Buk-Head Mount) remote capabe APU for fence or wa appications Aarm Processing Unit (APU) Rack & APUs Insensitive Lead-in Cabe Spitter Box Sensor Zone Length To Other Zones ZONE 1 ZONE 2 ZONE 3 Sensor Cabe Backbone Cabe Length n Up to 25 zones remote-capabe APU n For fence and wa appications n A zones are independent; an intrusion attempt on one zone wi not affect the other zones n The stand aone (FD525) or rack-mounted (FD525R) n APU can be ocated remotey (from 5 to 12km) n 500m sensing cabe per zone n 30+ configuration parameters n Idea for high-security appications such as nucear power pants and critica resource area The schematics above are simpified representations and shoudn t be considered as technica specifications. Feature Comparison Chart APU Mode Number: FD322 FD331 FD332 FD341 FD342 FD348R FD508 FD508 FD525 Fence Appications Was Anemoter Device Input Remote Capabe (insensitive Lead) 20km 20km 20km PL-1N Rated Number of SW Tuning Parameters 6 30 30 30 30 30 >30 >30 >30 IP-Enabed Opt. Opt. Opt. Opt. Number of Channes (Zones) 2 1 2 1 2 13 8 25 25 Maximising Sensing Cabe per Zone 500m 800m 800m 800m FD322 Rapid Fiber: fibre-optic fence protection kit for smaer perimeter The FD322 Rapid Fiber series offers cost-effective, packaged two-zone fibre-optic detection soution kits to provide an easy depoyment to protect smaer fenced perimeters. The kits incude a parts needed for the instaation: a two channe Aarm processing unit featuring two fuy independent zones, an encosure box, pre-terminated fibre-optic cabes avaiabe in two engths 100 to 200m, mounting hardware and custom tuning software. There is an option to use the IP encoder PiE-1 to make the APU PoE compiant and send the aarm code over to network. The aarm code has been integrated with a major VMS patforms.
Versatie and precise detection with REDSCAN Laser Sensors REDSCAN is an award-winning aser detector that identifies the size, speed and distance of a moving object and can function in effect ike an invisibe wa or pane. Using LiDAR technoogy, the sensors are unaffected by ight or heat sources making it a very reiabe detection system. With the abiity to be mounted either verticay or horizontay and to be used indoor or outdoor, the REDSCAN can be used for a wide range of security and safety appications. It can be depoyed to protect perimeters, buidings, skyights, pieces of art or vauabe assets as we as to increase safety in pubic transport by detecting peope on raiway tracks or crossings. RLS-3060 series The RLS-3060SH ver. 8.0 mode can provide up to 50m radius detection range in horizonta mode. Verticay, when mounted at 3.6m a 100m wide virtua wa woud be created. The RLS-3060L ver 8.0 mode provides a 30m radius detection range both verticay and horizontay. Vertica mode 3.6m high Horizonta mode 50m (165ft.) min 60cm high objects Extended range 30m (100ft.) min 30cm high objects 0 Primary detection range 30m 50m (100ft.) (165ft.) Extended range Note: 50m radius range is ony avaiabe with RLS-3060SH ver. 8.0 RLS-2020 series Vertica mode Horizonta mode The RLS-2020 series incudes an indoor ony sensor, RLS-2020i and an indoor/ outdoor sensor RLS-2020S. Both provide a 20x20 m detection range verticay and horizontay. 20m 20m (65.7ft.) (65ft.) 20m (65ft.) 20m (65ft.) 20m (65ft.) Buit-in anaytics to anayse the object s size, speed and distance The REDSCAN sensor constanty scans the detection area and provides ive X&Y coordinates and size information for a objects detected. It enabes security staff to foow the movement of the objects and know exacty where they are. Using the size information given by the aser sensor the system can be configured to detect ony objects smaer or bigger than a defined size, for instance ignoring vehices and detecting peope. The RLS-3060 modes can aso be set up to detect oitering and send an aarm if someone or something is staying in a specific area for more than the time defined. Independent detection areas The RLS-3060 sensors provide 4 independent detection areas when using anaogue connection and 8 when using IP connection. The RLS-2020 series provides 4 independent areas on IP connection. Each zone can be used to generate different events. It can trigger PTZ camera preset positions to track intruders across zones; it can trigger ights, warning system or send an aarm to dispatch security staff. RLS-3060 series Anaogue IP connection RLS-2020 series Easy to configure with REDSCAN Manager Software The Redscan LiDARs are extremey versatie and can be used for many different appications. A number of modes can be easiy configured: area aocation, area masking, day/night mode, oitering mode, thrown object detection mode etc. Redscan Manager is the configuration software that enabes a the different modes and features, it aows as we to customise easiy the detection area and seect the right settings.
REDSCAN versatiity Detection Detection area A2 area B1 Detection area A1 Area aocation Independent detection areas can be created within the overa detection range. Avaiabe for a Redscan modes Area masking An area can be easiy masked out from the overa detection area. Avaiabe for a Redscan modes Pattern settings Different detection patterns can be saved to suit different needs throughout the day. Avaiabe for a Redscan modes Detection Wa cimb detection This mode aows to detect peope cimbing over the wa. Avaiabe for RLS-3060 modes ony Detection Loitering detection This mode anayses if one person is staying within the detection area for over a set time. Avaiabe for RLS-3060 modes ony Video Management Software and PSIM integration The REDSCAN series is integrated with many Video Management Software and PSIM patforms aowing a number of security scenario incuding triggering ights, camera pre-set position, pubic address messages and notification to security staff. Visit our website for the ist of integrations. REDSCAN modes RLS-3060L/ RLS-3060L-PoE n 30m radius 190 degrees indoor/ outdoor LiDAR n Vertica and horizonta mounting n Unique detection agorithm providing X&Y coordinates n Automatic area setting function n Up to 8 independenty adjustabe detection areas (IP connection) and 4 inked outputs for PTZ camera contro n Scene seection n Anti-vandaism n PoE+ (RLS3060-PoE ony) RLS-2020I n IP/PoE indoor LiDAR n 20x20m 95 degrees detections range n Vertica and horizonta mounting n Unique detection agorithm providing X&Y coordinates n Up to 4 independent detection areas n Scene seection n Paintabe housing RLS-3060SH/ RLS-3060SH-PoE n 50m radius 190 degrees indoor/ outdoor LiDAR n Vertica and horizonta mounting n Unique detection agorithm providing X&Y coordinates n Automatic area setting function n Up to 8 independenty adjustabe detection areas (IP connection) and 4 inked outputs for PTZ camera contro n Scene seection n Anti-vandaism n Buit-in heater n PoE+ (RLS3060-PoE ony) RLS-2020S n IP/ PoE indoor and outdoor LiDAR n 20x20m 95 degrees detection range n Vertica and horizonta mounting n Unique detection agorithm providing X&Y coordinates n Up to 4 independent detection areas n Scene seection n High resoution n Indoor throw-in mode n Paintabe housing
3D Therma sensors for in fied detection The REDWALL ong range externa sensors are inteigent high-mounted detection systems that provide voumetric detection for outdoor appications covering areas as wide as 50m by 30m or as ong as 100 by 3m. They anayse subte temperature differences between a moving object and the background temperature to detect intrusion. They provide a great too for site security to capture where peope are and use the independent detection areas to drive PTZ cameras and provide visua verification. The REDWALL SIP therma sensors are avaiabe as anaogue wired, anaogue wireess or IP/ PoE-compiant modes. REDWALL SIP series key Features Customised detection area The View Finder instaation kit heps instaers set-up the detection area by cutting out the sensor s obstruction eements, ike trees for instance that are ikey to generate fase aarms. This enabes the system to be very reiabe. Adjustabe and independent sensitivity areas Outdoor sensors are subject to considerabe environment changes that coud impact their performance. That s why the REDWALL SIP series have been designed to automaticay adjust the sensitivity to the ambient temperature and ight. On these sensors, it is aso possibe to set up independent sensitivity for the near and far zones to adjust the detection eve and type of triggers depending of the eve of threat. Independent sensitivity seector for NEAR/FAR zones FAR 1 2 3 4 5 6 7 PTZ By utiizing contro is the enabed mutipe using outputs, the sensor s pan/tit/zoom mutipe contro outputs is enabed Camera SIP-100 NEAR B1 C1 D1 E1 F1 B2 C2 B3 C3 B4 C4 B5 C5 D2 D3 D4 D5 E2 F2 E3 E4 F3 F4 E5 F5 B6 C6 D6 E6 F6 Far zone Near zone Creep zone Anti-vandaism features A REDWALL SIP sensors are made of reinforced poycarbonate housing and feature anti-vandaism functions to notify the system if they have been tampered with. This consists of an active infrared anti-masking detection and anti-rotation function with acceerometer. REDWALL SIP-IP integrated with a major VMS patforms The REDWALL SIP-IP range are PoE compiant sensors that can be connected directy onto the network and wi transmit aarms using the REDWALL Event code, integrated with a major Video Management Software (VMS) patforms. For more detais visit our dedicated website www.optex-vms.com Anaogue or IP camera Direct integration to VMS patforms PoE switch REDWALL SIP-IP Outdoor PIRs REDSCAN series Indoor / outdoor Laser sensors IP beams (using IP encoder) Fibre optic fence sensors (with IP modue)
REDWALL SIP modes and detection areas SIP-3020modes detection range in meters or (feet) SIP-4010 modes detection range in meters or (feet) SIP 404 modes detection range in meters or (feet) SIP-3020_4010_404 Anaogue and wireess version avaiabe (WF modes) SIP-3030_4010_404-IP-BOX IP/PoE compiant SIP-3020 SIP-4010 SIP-404 20 (65) 30 (100) 10 (33) 40 (130) 40 (130) n 2 independent sensitivity seectors and aarm output for near and far zones SIP-3020/5_4010/5_404/5 Anaogue modes SIP-3020/5_4010/5_404/5-IP-BOX IP/ PoE compiant SIP-3020/5 modes detection range SIP-4010/5 modes detection range SIP-404/5 modes detection range SIP-3020/5 SIP-4010/5 SIP-404/5 n Buit in creep zone sensor (6x9m) n 3 independent sensitivity seectors and aarm outputs for near/far areas and creep zone 20 (65) 30 (100) 10 (33) 40 (130) 40 (130) SIP-5030_SIP-100 Anaogue modes SIP-5030_100-IP-BOX SIP-5030 modes detection range SIP-100 modes detection range SIP-5030 SIP-100 50 (165) 100 0 (330) 30 (100) n Long range sensors n Buid-in creep zone (6x9m) n 3 independent sensitivity seectors and aarm outputs for near/far areas and creep zone 3 (10) SIP-3020 CAM DN Anaogue mode SIP-3020 Cam DN detection range n Short range sensor with buit-in Day/Night camera 20 (65) 30 (100) OPTEX has more sensing technoogies up its seeve A arge range of indoor and outdoor OPTEX sensors are avaiabe In addition to a the sensors presented in this cataogue, OPTEX offers a number of wa and ceiing mounted indoor detectors as we as a series of wired and wireess PIRS, dua tech and active infrared outdoor sensors. More information is avaiabe on our website. Peope counting and fow anaysis systems OPTEX provides a video based mutidirectiona peope counting and fow anaysis system. This soution can be used for business appications to measure footfa or security and safety appications to monitor the eve of occupancy or detect peope going the wrong direction in controed areas. Taigating detection for singe access areas For high security areas, where singe authorised access is required, OPTEX brings an additiona ayer of security by detecting taigating and preventing access in such situations. Vehice detection for gate activation and car counting OPTEX provides an above ground FMCW based sensor to detect vehice for gate activation. Another sensor can count moving vehices up to 60m/h - (100km/h). A products featured on this brochure can be submitted to specification changes. Pease contact us to get the atest status.
OPTEX, eading sensor manufacturer for neary 40 years, provides high performance detection and video anaytics systems for security, safety and business appications. OPTEX s muti-ayered intrusion detection systems hep protect perimeters, sites, roofs and buidings and offer a wide range of technoogies to suit a types of site configuration and environment incuding harsh outdoor conditions. Its systems are depoyed in thousands of instaations wordwide, from miitary and government faciities to transportation and utiities sites and other critica infrastructure. Founded in Japan, OPTEX is a goba company with regiona headquarters and a number of oca offices. OPTEX EMEA HEADQUARTERS OPTEX (EUROPE) LIMITED Unit 13, Cordwais Park, Civemont Road, Maidenhead, Berkshire, SL6 7BU, United Kingdom Te: +44 (0) 1628 631 000 Emai: marketing@optex-europe.com www.optex-europe.com OPTEX LOCAL OFFICES IN EMEA Optex Security Sp. z o.o. (Eastern Europe / CIS countries) Te: +48 (22) 598 06 60 Emai: optex@optex.com.p Optex Security SAS (France, North Africa) Te: +33 (0) 4 37 55 50 50 Emai: contact@optex-security.com OPTEX (Europe) LTD, Dubai branch (Midde East) Te: +971 (0) 4501 53 94 Emai: marketing@optex-europe.com OPTEX TECHNOLOGIES B.V. (Beneux) Te: +31 70 4194100 Emai: info@optex.eu