SECTION 9 ~ NECROPSY DISSECTION TABLES SECTION INDEX NECROPSY TABLES... PAGE Downdraft Necropsy Station... 2-3 Small Necropsy Stations... 4-9 Medium Necropsy Station... 10-11 Standard Necropsy Table... 12-13 Ventilated Hood Dissection Table... 14-15 T Shaped Large Station... 16-17 HD Large Animal Station... 18-20 Small Animal Necropsy Tables Large Animal Necropsy Tables 9-01
MODEL 1036-210 DOWNDRAFT NECROPSY WORKSTATION MODEL 1036-210 Standard Design Features All stainless steel construction Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Radii on all inside and outside corners for easy cleaning Hydro-Aspirator with cold water control valve, nozzle, 10 foot of flexible hose and backflow protection Mixing Faucet with gooseneck spout and wrist blade handles Heavy-duty 1/2 hp Commercial Disposal with switch Large single compartment sink basin, 14 inches x 12 inches x 8 inches deep Full Length, Perforated Supports Rapid and positive drainage Access panel door Waterproof GFCI Electrical Outlet Plumbing and Electrical lines factory installed and required only single point connection at the project location 9-02
MODEL 1036-210 LAYOUT DRAWING & OPTIONAL FEATURES PER CUSTOMER REQUIREMENT MIXING FAUCET PER CUSTOMER 32 REQUIREMENT FULL LENGTH PERFORATED SUPPORTS HYDRO ASPIRATOR DISPOSAL SWITCH GFCI 56 36 INTERNAL BAFFLE ACCESS PANEL All measurements in inches MODEL 1036-210 Optional Accessories: Heavy Duty Commercial Disposal (3/4, 1 or 2 hp) Postmortem Scale with Scale Pole Surgical Light Fixture Table End Rinse with cold water control valve and backflow protection Gas / Air / Vacuum / Oxygen Cocks Emergency Eye Wash Centimeter or Inch Markings 9-03
MODEL 1036-215 SMALL ANIMAL NECROPSY TABLE MODEL 1036-215 Standard Design Features: Standard Size: 30 inches wide x 60 inches long x 36 inches high All stainless steel construction Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Radii on all inside and outside corners for easy cleaning Hydro-Aspirator with cold water control valve, nozzle, 10 foot of flexible hose and backflow protection Mixing Faucet with gooseneck spout and wrist blade handles Heavy-duty 1/2 hp Commercial Disposal with switch Large single compartment sink basin, 14 inches x 12 inches x 8 inches deep Full Length, Perforated Supports Rapid and positive drainage Access panel door Waterproof GFCI Electrical Outlet Plumbing and Electrical lines factory installed and required only single point connection at the project location 9-04
MODEL 1036-215 LAYOUT DRAWING & OPTIONAL FEATURES 30 60 MIXING FAUCET FULL WIDTH PERFORATED SUPPORTS HYDRO ASPIRATOR SPRAY HOSE 36 1/2 HP DISPOSAL GFCI DISPOSAL SWITCH All measurements in inches ACCESS PANEL MODEL 1036-215 Optional Accessories: Heavy Duty Commercial Disposal (3/4, 1 or 2 hp) Postmortem Scale with Scale Pole Surgical Light Fixture Table End Rinse with cold water control valve and backflow protection Gas / Air /Vacuum Valves Emergency Eye Wash Centimeter or Inch Markings 9-05
MODEL 1036-273 4 STATION BACKDRAFT/DOWNDRAFT MODEL 1036-273 Standard Design Features: Standard Size: 70 inches wide x 66 inches long x 32.5 inches high All stainless steel construction Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Magnifier Lights (4) Hinged Access Doors (4) (4) 18ga. Stainless Steel Perforated work surface panels recessed 1/4 inch to prevent fluids escaping Waterproof GFCI Electrical Outlet (4) 9-06
MODEL 1036-273 LAYOUT DRAWING & OPTIONAL FEATURES 66 70 24 26 24 26 (4) MAGNIFIER LIGHT (4) GFCI EXHAUST GRILL EXHAUST GRILL 32.5 All measurements in inches HINGED ACCESS PANEL MODEL 1036-273 Optional Accessories: Gas / Air Vacuum / Oxygen Cocks Emergency Eye Wash Spray Hose Assembly 9-07
MODEL 1036-225 SMALL DOWNDRAFT DISSECTION TABLE MODEL 1036-225 Standard Design Features: Standard Size: 32 inches wide x 60 inches long x 36 inches high All stainless steel construction Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Radii on all inside and outside corners for easy cleaning Hydro-Aspirator with cold water control valve, nozzle, 10 foot of flexible hose and vacuum breaker Mixing Faucet with gooseneck spout and wrist blade handles Heavy-duty 1/2 hp Commercial Disposal with switch Large single compartment sink basin, 14 inches x 12 inches x 8 inches deep (2) Perforated Dissection Grids Rapid and positive drainage Removable Access panel Waterproof GFCI Electrical Outlet Plumbing and Electrical lines factory installed and required only single point connection at the project location 9-08
MODEL 1036-225 LAYOUT DRAWING & OPTIONAL FEATURES 60 HYDRO ASPIRATOR 32 MIXING FAUCET SPRAY HOSE FULL LENGTH PERFORATED SUPPORTS GFCI DISPOSAL SWITCH 36 REMOVABLE ACCESS PANEL All measurements in inches MODEL 1036-225 Optional Accessories: Heavy Duty Commercial Disposal (3/4, 1 or 2 hp) Table End Rinse with cold water control valve and vacuum breaker Gas / Air / Vacuum Valves Emergency Eye Wash Centimeter or inch markings 9-09
MODEL 1036-230 MEDIUM SIZE NECROPSY STATION MODEL 1036-230 Standard Design Features: Standard Size: 32 inches wide x 96 inches long x 40 inches high All stainless steel construction Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Radii on all inside and outside corners for easy cleaning Downdraft ventilation provided at each sink location (2) Spray Hose Assemblies with cold water control valves, nozzles, 10 feet of flexible hose and backflow prevention Mixing Faucet with gooseneck spout and wrist blade handles (2) Heavy-duty 1/2 hp Commercial Disposal with switch (2) Large single compartment sink basin, 24 inches x 12 inches x 8 inches deep (4) Tie Rings for hold-down points Rapid and positive drainage Removable Access panel (2) Waterproof GFCI Electrical Outlet Plumbing and Electrical lines factory installed and required only single point connection at the project location 9-10
MODEL 1036-230 LAYOUT DRAWING & OPTIONAL FEATURES 32 MIXING FAUCET 96 (2) GFCI ACCESS PANEL (2) DISPOSAL SWITCH (2) 1/2 HP DISPOSAL All measurements in inches ACCESS PANEL (2) SPRAY HOSE ASSEMBLY MODEL 1036-230 Optional Accessories: Heavy Duty Commercial Disposal (3/4, 1 or 2 hp) Postmortem Scale with Scale Pole Gas / Air / Vacuum Valves Emergency Eye Wash Centimeter or Inch Markings 9-11
MODEL 1036-235 STANDARD NECROPSY TABLE MODEL 1036-235 Standard Design Features: Standard Size: 30 inches wide x 72 inches long x 36 inches high All stainless steel construction Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Radii on all inside and outside corners for easy cleaning Mixing Faucet with gooseneck spout and wrist blade handles Large single compartment sink basin, 14 inches x 12 inches x 8 inches deep Full Length Perforated Supports Rapid and positive drainage Waterproof GFCI Electrical Outlet Plumbing and Electrical lines factory installed and required only single point connection at the project location 9-12
MODEL 1036-235 LAYOUT DRAWING & OPTIONAL FEATURES 30 72 MIXING FAUCET FULL LENGTH PERFORATED SUPPORTS GFCI LARGE SINK BASIN 36 All measurements in inches ADJUSTABLE LEVELING FEET MODEL 1036-235 Optional Accessories: Heavy Duty Commercial Disposal (1/2, 3/4, 1 or 2 hp) Postmortem Scale with Scale Pole Table End Rinse with cold water control valve and vacuum breaker Gas / Air / Vacuum Cocks Emergency Eye Wash Centimeter or Inch Markings Hydro-Aspirator Assembly Spray Hose Assembly 9-13
MODEL 1036-240 VENTILATED HOOD DISSECTION TABLE MODEL 1036-240 Standard Design Features: Standard Size: 28 inches wide x 60 inches long x 40 inches high, working height All stainless steel construction Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Radii on all inside and outside corners for easy cleaning Faucet with cold water control Hose Rinse Assembly with cold water control Large single compartment sink basin, 14 inches x 12 inches x 8 inches deep Rapid and positive drainage Waterproof GFCI Electrical Outlet Plumbing and Electrical lines factory installed and required only single point connection at the project location 9-14
MODEL 1036-240 DRAWING & OPTIONAL FEATURES 28 60 PLEXIGLASS WORK SHIELD LIGHT SWITCH GFCI EXHAUST CONNECTION FAUCET FLUORESCENT LIGHT FAUCET CONTROL RINSE CONTROL FLEX ARM LIGHT 56 EXHAUST GRILL 40 LARGE SINK BASIN ADJUSTABLE LEVELING FEET All measurements in inches MODEL 1036-240 Optional Accessories: Heavy Duty Commercial Disposal (1/2, 3/4, 1 or 2 hp) Table End Rinse with cold water control valve and vacuum breaker Gas / Air / Vacuum Valves Emergency Eye Wash Centimeter or Inch Markings Flex Arm Light with Magnifier 9-15
MODEL 1036-245 T SHAPED LARGE ANIMAL NECROPSY TABLE MODEL 1036-245 Standard Design Features: All Stainless Steel construction on sink area and elevating tabletop Heliarc-welded seams and joints, ground and polished to match adjoining surfaces Radii on all inside and outside corners for easy cleaning Hydro-Aspirator with cold water control valve, nozzle, 10 foot of flexible hose and backflow protection Mixing Faucet with gooseneck spout and wrist blade handles Heavy-duty 1/2 hp Commercial Disposal with switch Rapid and positive drainage Access panel doors Waterproof GFCI Electrical Outlet 5,000 lbs Hydraulic lifting device with foot pedal operation Accordion Bellows to conceal hydraulic lifting mechanism (2) Spray Hose Assemblies with control handle, 10 foot hose and cold water control Plumbing and Electrical lines factory installed and required only single point connection at the project location 9-16
MODEL 1036-245 LAYOUT DRAWING & OPTIONAL FEATURES 96 HYDRO ASPIRATOR MIXING FAUCET SPRAY HOSE ASSEMBLY 15 TO 36 ACCESS PANEL All measurements in inches FOOT PEDAL HEIGHT ADJUSTMENT 96 HYDRAULIC SCISSOR LIFT w/bellows MODEL 1036-245 Optional Accessories: Heavy duty Commercial Disposal (3/4, 1 or 2 hp) Postmortem Scale with Scale Pole Surgical light Fixture Table End Rinse with cold water control valve and vacuum breaker Gas / Air / Vacuum Valves Emergency Eye Wash Centimeter or inch markings 9-17
MODEL 1036-250 HD LARGE ANIMAL NECROPSY TABLE MODEL 1036-250 Standard Design Features: U-shaped table is designed for use as a large animal necropsy table. It features all heavy gauge stainless steel construction. (11 gauge Type 304 with a no. 4B Finish) The unit is designed to handle a centralized load of 5,000 pounds and an offset load of 2,500 pounds. The inner frame support is fabricated from heavy gauge steel tubing The unit elevates from 15 to 36 above the finished floor The table top and inner frame support are attached to an electrically powered hydraulic scissor lift. The lift is floor mounted and has a capacity of 6,000 pounds. (115v / 60 Hz / 1 Phase - 1.5 hp motor) A 52 drain slot is centrally located on the back edge of the table. The back edge is the side opposite the U shaped indent Accordion style bellows surround the scissor lift allowing for complete washdown of the unit Easy to use up/down elevation control In ground lifting devices are available. Please contact us for details and special installation requirements Lighter capacity mobile units also available 9-18
MODEL 1036-250 LAYOUT DRAWING & OPTIONAL FEATURES 108 15 TO 36 66 All measurements in inches 9-19
MODEL 1036-250M HD LARGE ANIMAL NECROPSY TABLE MODEL 1036-250M Standard Design Features: U-shaped table is designed for use as a large animal necropsy table. It features all heavy gauge stainless steel construction. (11 gauge Type 304 with a no. 4B Finish) The unit is designed to handle a centralized load of 5,000 pounds and an offset load of 2,500 pounds. The inner frame support is fabricated from heavy gauge steel tubing The unit elevates from 15 to 36 above the finished floor The table top and inner frame support are attached to an electrically powered hydraulic scissor lift. The lift is floor mounted and has a capacity of 6,000 pounds. (115v / 60 Hz / 1 Phase - 1.5 hp motor) A 52 drain slot is centrally located on the back edge of the table. The back edge is the side opposite the U shaped indent Accordion style bellows surround the scissor lift allowing for complete washdown of the unit Easy to use up/down elevation control In ground lifting devices are available. Please contact us for details and special installation requirements Lighter capacity mobile units also available 9-20