Combination ultrasonic and heating method of misting. Micro-computer automatically senses air humidity and start operation

Transcription

1 Wholly Electronic Circuit Micro-computer automatically senses air humidity and start operation Digital display screen shows operating conditions Thank you for using our product. You have purchased a high-quality product. Your satisfaction means everything to us. We look forward to serving you at all times. To help you operate this device, please read this manual carefully and keep the instruction manual in a proper and safe place. Main Features Combination ultrasonic and heating method of misting Micro-computer automatically senses air humidity and start operation Digital display screen shows operating conditions Choice of multiple operating modes Up to 8 hours preset timer to set operation Misting nozzle can be rotate 360 degrees, the direction of mist can be adjusted at will. Ion exchange lter ectively reduces the built-up of white powder residue

2 Safety Operation Ensure that all safety precautions are followed when using electrical appliances for the proper operation of the device. This instruction booklet describes the safety precautions to be observed during operation to prevent injuries to yourself, other persons and damage to the device. The content not only is suitable for this product but also suitable for electrical appliances in general. Caution RATED VOLTAGE Please use the voltage as stated on the label. Over voltage may cause malfunction, fire hazard or electric shock. Unplug Please make sure to unplug the power socket during maintenance. It may cause electric shock or accidents. DISMANTLE To prevent electric shock, do not dismantle, repair or modify this product freely. In case of malfunction, please contact the authorized maintenance center. Do not bend, drag, twist, pack or extrude the power line with force. It may cause fire hazard or electric shock if the power line is broken. Please hire professional people to replace the special power line in case the power line is broken. Do not use the device in places where electrical appliances, computer or precision devices are used. The humidity or white powder may cause malfunction of the machines. Do not insert objects or needles into the misting nozzle or the hollow space of the device. It may cause electric shock, malfunction or other accidents. Children should not be allowed to touch or play with this device to avoid accidents. Do not use acid or alkali solvent to clean the interior of the device. Solvent residue left in the atomizer may produce poisonous gas causing malfunction or accidents. Do not breathe the mist emitted from the misting nozzle, it is harmful to your health. Do not wet the device or wash it with water. It may cause short-circuit, electric shock or fire hazard. Do not use wet hands to plug or unlug power socket, it may cause electric shock. When abnormal conditions occurred, please stop the device and unplug the power immediately. Continuing running of the malfunctioned device may cause fire hazard or electric shock. Please contact the distributor or appointed authorized maintenance center. 2

3 Safety Use This item is a highly effective humidifier. Using the humidifier in different and improper places may bring bad effect to its environment or cause malfunction. Please read the following items carefully in order to make better use of this device. Caution 1. Do not place the device on an unstable place, otherwise water overflow will wet the ground or cause malfunction. 2. Do not place the device on a high or leaning places, otherwise it will fell down during earthquake or accidental knock. Placing the device on a leaning surface may result in wrong operation of the water level checking device which may cause the operation to stop or water leakage. 3. Do not expose the device to direct sunshine or put the device on top of or near the airconditioner. It will cause distortion, color lose or wrong operation. 4. Do not put the device on furniture or ground with poor heat-resistance, it will cause distortion or color lose of the base caused by overheat. 5. Do not put the device in a place with strong magnetic force or it will cause wrong operation. 6. Do not put the device on top of the blanket or carpet. It will block air-inlet at the bottom of the item, and cause wrong operation or malfunction. 7. Do not put the device in a place of heavy human traffic who may bump into the device, stumble by it power line, hit the humidifier and resulting in water leak that causes malfunction. 8. Do not put the device near furniture or curtain. The mist will wet furniture or curtain causing color loss or molding. At the same time, the white powder contained in the mist will attach to the surface of the furniture which usually can be wipe off by wet cloth. However, in some instances, it may be difficult to wipe off due to the different material of the furniture or the degree of the surface treatment. In places with luxurious furniture, please adjust the direction of misting nozzle, do not over misting. 9. Do not dismantle the water tank for personal use or use for purpose beyond humidifying. Otherwise it will wet the ground or cause water leakage into the air outlet causing malfunction or other accidents. 10.Please try to fill in the tank with clean water every day. Make sure to pour out any left-over water after each use. Please clean the water tank and atomizer every one or two weeks and keep them in clean condition. 11.Please do not connect to power supply if the device is in the condition without water or upside down. It will cause bad effect to the atomizer and cause malfunction. 12.Do do transfer the device during operation, it will cause water leakage, wet ground or malfunction. 13.During winter seasons, water in the tank may be freeze over. Please pour out the water in the water tank. Frozen water may cause mulfunction. 14.Please do maintenance to the interior of the device by clean the sink and atomizer regularly. Continuous running of the device with scale deposit will cause operating failure or malfunction. 3

4 Name for each part and their function Misting nozzle can be rotate 360 degrees, the direction of mist can be adjusted at will. Display Screen Auto Mode Water shortage display Figure display Heating display Quiet Mode Timer continuous operation Misting amount display Operation Buttons water tank handle Misting nozzle nozzle nozzle insert position Power switch Humidity adjust(+) Misting amount setup Time setup(-) Time setup(+) Mode setup Heating setup Humidity adjust(-) water tank Inside atomizer air outlet power plug water inlet buoy water reservoir air inlet at the bottom Ion exchange filter water valve mandril temperature and humidity sensor cleaning brush 4

5 How to Use 1 Filling the water tank Take off misting nozzle from the water tank Misting nozzle will fall off if it is not take off from the water tank when the tank is inverted. So make sure you take off the misting nozzle. 2 Take off the water tank from the device 1) Grasp the handle of the water tank with your hand, pull up the water tank to take it off. 2) Unscrew the tank cover counter clockwise. Attention To move the device, do not pull by the handle of the water tank instead hold and support the device at its bottom Filling with tap water 1) Do not fill the device or water tank with substance such as essential oil, perfume,detergent, chemical drugs, warm water(over 40 degrees) etc. Otherwise, the water tank and internal parts of the device may be damaged causing malfunction. 2) Do not fill in any other liquid except tap water. Different composition of liquids may have harmful effect to the internal parts and cause malfunction. 3) Do not fill in the water directly to the interior of the device or the misting nozzle. Water inside the device may cause malfunction. 4) Do not bump or throw the water tank. It may be broken and cause water leakage. Stop using the device in case of heavy bumping of the water tank. You may contact the appointed maintenance or repair service center immediately. 5) Fill with clean water every day and keep it cleaning. Make sure you screw the tank cover firmly Make sure you have put the rubber ring onto the tank cover and firmly screw the tank cover inclockwise direction. Failure to do the above two measures may result in air entering the water tank and cause malfunction. Put on the water tank and assemble the misting nozzle Do not move the device after assembling the water tank and do not dismantle or assemble the water tank frequently. Otherwise, water may leak out and cause malfunction. The water mist will wet the device and its surroundings if it is operated without installing the misting nozzle. Please make sure you install the misting nozzle properly before operating the device. 5

6 How to Use Operating Methods 1 Plug the power supply When you plug-in the device, music will sound as indication. Warnings Please use the AC power supply as stated on the label. Higher voltage may lead to malfunction causing fire or electric shock. Warnings Do not use the device when the power line or plug is broken, or the socket's gate is too loose. It may cause sparkles, short-circuit or electric shock. Warnings Do not power on when water has run out or when the device is under upside down condition. It may cause malfunction. 2 Push the "Power" Button 1)Push the "Power" button, the music is on and the device begin its operation automatically. 2)The display screen will show "Auto", and the mist come out from the misting nozzle 3)The display screen will show the current humidity status, warm misting mode will begin automatically. 4) Ten seconds after pushing the power button, the misting amount indicator light will flash on and off continuously ( preparation for operation) 5) At the beginning of its operation, misting amount may be unstable which is caused by difference in temperature and water quality. It needs some time for the atomizer to change water into mist and also to keep it stable. The misting amount will become stable gradually after minutes of operation. 6) It needs about minuts for the mist to turn warm. power 6

7 How to Use About Auto Operation The temperature and humidity sensor is installed inside of the product. It will adjust to the most appropriate humidity and begin its operation according to the room temperature (Surrounding temperature). Surrounding humidity <19 20~21 22~24 >25 the most appropriate humidity ratio. 65% 60% 55% 50% About misting amount during auto operation Misting amount is adjusted automatically according to the difference between tested humidify and the ideal humidity.. For initial use or repeated use after fill in the water, despite the display screen show "Add Water",operation will begin automatically after 2-5 minutes. ( It needs about 2-5 minutes for the water to flow from water tank to water slot.) Misting amount during auto operation Difference between the most appropriate humidity and the current humidity >16 15~4 <3 the current humidity is higher than the most appropriate humidity misting amount ( operation display ) strong operation middle operation weak operation stop Push the "Mode setup" Button once, it will change to " Sleep", "Personal setup mode", " Auto operation mode" respectively. Quiet Operation Mode Push the "Power" button, then push the " sleep setup" button once during auto operation to change to sleep operation mode. "ZZZ" marks indicate sleep operation mode The most appropriate humidity for sleep operation mode is set at 50%. When at its sleep operation mode, warm misting operation (indicated by heat sign) will continue for 6 hours. It will stop operation after 6 hours. " Add water" sign will appear when water in the tank run out during sleep operation mode and operation will stop. ( Add water warning will not sound.) misting amount during quiet operation difference between the most appropriate humidity50% and the current humidity >16 15~4 <3 current humidity is higher than the most appropriate humidity misting amount ( operation display) strong operation medium operation weak operation stop The humidity figure shown in the display screen is the figure that sensed by the humidity sensor inside of the product. It is different from the actual humidity in the room. 7

8 How to Use Personal Setup Operation Method Push the "Power"button and starts its operation, push "Mode Setup" button and you can change to the personal setup operation mode. During personal setup operation mode, you can adjust freely the misting amount, warm mist humidifying on/off, the most suitable humidity setup and timer operation setup. Adjust the misting amount Push " misting amount setup" button once each, you can adjust to "weak-middle-strong" settings respectively. And the display screen will indicate accordingly. When set the misting amount, misting nozzle will not spray when the room humidity is higher than the set humidity. Regarding "on" or "off" for the humidifying with warm mist operation Push "heating" button once each, it will switched between "on" and "off" status for the humidifying with warm mist operation. During warm mist humidifying, warm mist will be produced by built-in heater inside the product. The most suitable humidity setup The most suitable humidity can be adjusted by means of the upper or lower switch for humidity setup The range for setup is between 40% to 80%, with each adjustment of 5% difference. About timer With the touch of "time setup" button leftwards or rightwards, you can set the time for stopping the operation. The range is from 0( continuous operation) to eight hours, with each adjustment of 1 hour difference. Explanation for combined function of the humidifier With the help of heater installed inside, water in the water tank is heated and transfer through atomizer to produce warm mist. The efficiency for humidifying will be increased through the help of combined humidifier. The surrounding temperature will not be decreased due to the warm mist. It needs about ten to twenty minutes for the emitting of warm mist. (The time needed for the heater to warm up the water after it is on.) The average temperature for warm mist is 40 degrees. It is difficult to feel the mist temperature sometime due to the difference in surrounding temperature and humidity. 8

9 How to Use Stop Operation 1 Push the power button, the music is on, indicator light 0f the display screen is off, operation stopped. 2 Unplug the plug from the socket. Mist capacity When tank full of water The humidifier is under: low operation,can mist for continuous about 60 hours; middle operation,can mist for continuous about 30 hours; high operation,can mist for continuous about 20 hours; warm misting (high)operation,can mist for continuous about 11 hours After water in the water tank is finished Its operation will stop when water in the water tank has been finished, the alarming sound for adding water will come on and indicator light for "add water" will flash. After five seconds, the indicator light stop flashing and the red light is on. If you want to continue using the devise, add water according to the correct operations. When pull up the water tank, water at the bottom of the water tank may drop down. Please dry the bottom with towel when pull up the water tank to avoid wetting the floor or furniture. Please make sure not to drop or bump heavily the water tank when adding water. The water tank will be broken and leak if it is subject to drop or heavy bumping. Attention There will be some water scaling in the water slot or atomizer after a period of operation. Continuing use of the device in this case may result in abnormal operation or malfunction. Please make sure to clean the water slot and atomizer one or two times each week and try to always use this device under clean conditions. Please change water in the tank every day, and make sure to maintain it regularly. 9

10 About consumable parts About Ion Exchange Filter White Powder in the mist may be deposited at the surrounding objects. These white powder are calcium and magnesium found in ordinary tap water. Although they are not harmful to human, they may caused adverse effect when adhere to the surface of furniture in large quantity. By means of ion exchange filter, calcium and magnesium from the tap water are removed and in turn reduced the production of white powder. Ion exchange filter (removable type, installed at the bottom of water tank) may stain the water in the trough to the color of tea at the beginning of operation. This has no effect on safety or its performance. However, you can pour out the water if you wish and continue operation. filter replacement The useful life of the ion exchange filter is about 400 liters. Continual use after its lifetime will lower its capability to remove the hardness components (calcium and magnesium) in tap water. As a result, there will be increasing built-up of white powder. The standard period of filter change is about 180 days under automatic mode of operation (heating humidifying operation time of about 6 hours every day). Based on different frequency of use and quality of water, the timefor filter change may be shorten. Please pay attention to thebuilt-up of white powder. Ion exchange filter is installed at the bottom of water tank.when you exchange the filter,you should take away the cover by counterclockwise,then move the filter by counter-clockwise.now you can install the filter by clockwise according to right picture.last you can put the cover and exchange filter at the bottom of water tank by clockwise. Please contact distributor or authorized service center in case you need to purchase ion exchange filter. Ion exchange filter 10

11 Cleaning and Maintenance How to Clean Attention Please make sure you have unplugged the plug from the socket before you clean the device. Otherwise, it may caused electric shock or accidents. Please wait untill the water has cooled down before you do the cleaning or it may burn your hands. Maintaining the exterior of the device Please use wet and soft cloth to wipe the outside of the device. Attention Please do not clean the device completely otherwise will caused electric shock. Please do not use solvent, gasoline, xylene, talcum powder and brush. It may cause deterioration or color loss. Water Slot Maintenance Please wipe off water scale inside of the water slot with wet and soft cloth. You can use the brush attached to brush away water scale on minute parts and wipe again with soft cloth. Please clean the device one or two times each week. water reservoir Buoy Maintenance Please make sure if there is any dust around the buoy and clean it accordingly. You can use the brush attached to brush away water scale on minute parts and wipe again with soft cloth. buoy Please clean the device one or two times each week. Atomizer Maintenance Please use the attached brush to wipe off the scale on the surface of the atomizer and then wipe again with soft cloth. Please clean the device one or two times each week. Attention Please do not use metal brush, metal blade, abrasive brush or talcum powder to wipe the surface of the atomizer. It may cause deformation, abrasion resulting in lower misting amount or other malfunction. atomizer 11

12 Cleaning and Maintenance Maintenance for water tank and misting nozzle Take off the misting nozzle, and turn clockwise to remove the cover of the water tank located at the bottom of the tank to dispose the remaining water inside. The misting nozzle will fall off if you dispose water in the tank without first taking off the misting nozzle. Please make sure you remove the misting nozzle first. Please clean the water tank and its cover with clean water. Please clean the water tank cover carefully,do not clean with force, otherwise it may cause water leakage from the cover. Dry it with soft cloth after wiping off the scale on the surface of the misting nozzle. Please clean the exterior of the device with wet and soft cloth. Attention How to Clean The water tank may leak if it is subject to heavy bumping. Stop its operation immediately when water leakage happened and contact the appointed maintenance center. Maintenance after cleaning Please wipe off the water after cleaning, and make sure to air dry the water tank and body of the device to keep them completely dry. Please make sure there is no water left inside the water tank and the body of the device. Please assemble the water tank and body of the device and put into the plastic bag, then pack it in the original color box and store in a place of low humidity. Attention It will cause moulding or malfunction if you store the device without completely drying it. So make sure you store the item only after complete dry up. 12

13 Trouble-shooting In case something abnormal happened, please refer to the following ways to remedy If you cannot solve problems with the following ways, please contact the maintenance center. Abnormal condition no misting poor misting Without warm mist The difference between current humidity and hygrograph is too big. Mist with strange smell With pupu sound with popo sound Possible cause Has the plug been plug into the socket correctly? Is the red light on add water indicator flushing on and off? ( Is water run out in the tank?) Operate under weak mode? (Is the display screen show "weak"?) Is there any water scale on the surface of the atomizer? Have you chosen "using warm mist" under the personal setup mode? Is the operation just begin? Is there any dust inside of the air inlet? Is the device being operated in places easily influence by the environment such as near the window? Is un-fresh water being used? Is there any water scale or garbage inside the water slot or atomizer The sound of filling water from water tank to the body. The sound for fan operation Correction method please plug in correctly Please add water to the water tank It is not a malfunction. If you want to change to strong operation mode, push the "misting amount" button under the personal setup mode and change to strong operation mode. Please clean the atomizer Push the "warm mist" button under personal setup mode and change to using warm mist to humidifying operation. It is not a malfunction. It needs about ten to twenty minutes for the emitting of warm mist. (The time needed for the heater to warm up the water after it is on.) Please clean the air inlet. Even in the same room, the humdity will be varied due to different humidity of the different location. Please put the device in places less likely to be influenced by the environment. Please clean the device according to the instructions on cleaning and maintenance and replace with fresh water. It is not a malfunction, please keep on using Correct method: It is not a malfunction, please keep on using. 13

14 Product Description Model No. Rated Voltage use AC power supply as stated on the label AC V/50Hz,AC V/50-60Hz Power Consumption 85W Water Volume 4000ml Misting rate Max340ml/h Sound Level Low 20dB Med 27dB Hi35dB Dimensions(mm) 185x204x340 Weight 2980g Applicable area 20m 2 without prior announcement. The pictures are for reference purpose only, the real product shall prevail. 14