SVENSK STANDARD SS-EN 16147:2017

Size: px

Start display at page:

Download "SVENSK STANDARD SS-EN 16147:2017"

Morgan Simmons
5 years ago
Views:

1 SVENSK STANDARD SS-EN 16147:2017 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 2 Språk/Language: engelska/english ICS: ; Värmepumpar med elektriskt drivna kompressorer Provningsmetoder för bestämning av prestanda och krav på märkning av värmepumpar avsedda för värmning av tappvatten Heat pumps with electrically driven compressors Testing, performance rating and requirements for marking of domestic hot water units

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN 16147:2017 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN 16147:2017. Denna standard ersätter SS-EN 16147:2011, utgåva 1 och SS-EN 16147:2011 / AC:2011, utgåva 1. The European Standard EN 16147:2017 has the status of a Swedish Standard. This document contains the official English version of EN 16147:2017. This standard supersedes the Swedish Standard SS-EN 16147:2011, edition 1 and SS-EN 16147:2011 / AC:2011, edition 1. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Värmepumpar, SIS / TK 467. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM Provläsningsexemplar / Preview EN January 2017 ICS Supersedes EN 16147:2011 English Version Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units Pompes à chaleur avec compresseur entraîné par moteur électrique - Essais, détermination des performances et exigences pour le marquage des appareils pour eau chaude sanitaire Wärmepumpen mit elektrisch angetriebenen Verdichtern - Prüfungen, Leistungsbemessung und Anforderungen an die Kennzeichnung von Geräten zum Erwärmen von Brauchwarmwasser This European Standard was approved by CEN on 8 October CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16147:2017 E

6 SS-EN 16147:2017 (E) Provläsningsexemplar / Preview Contents Page European foreword Scope Normative references Terms and definitions Symbols and abbreviations Installation requirements Test apparatus and uncertainties of measurement Test room for the outdoor heat exchanger of air source heat pumps Installation and connection of the heat pump Installation of heat pumps consisting of several parts Settings and test conditions General Settings for non-ducted air source units Setting the external static pressure difference for ducted air source units Setting the difference of temperature for heat pumps using a liquid as heat source Test conditions General test conditions Additional test conditions Performance tests General Basic principles Off-peak products Power input corrections Power input of fans for heat pumps with duct connection Power input of liquid pumps Stabilization [stage A] Filling and storage [stage B] Filling and heating up period [stage C] Standby power input [stage D] Water draw-offs and COP calculation [stage E] Determination of the useful energy Determination of the electrical energy consumption (W EL-LP) Coefficient of performance (COP DHW) Reference hot water temperature and volume of mixed water at 40 C [stage F] Calculation of the smart control factor SCF General Smart Control Test procedure Determination of the ambient correction term Q cor Water heating energy efficiency η wh Determination of Q elec Calculation of η wh for heat pump water heaters and heat pump combination water heaters Calculation of the Annual Consumption of electric energy Other performance

7 SS-EN 16147:2017 (E) Rated heat output Seasonal coefficient of performance (SCOP DHW) Other tests Temperature operating range Outside the operating range Safety devices checking test General Shutting off the heat transfer medium flows Complete power supply failure Condensate draining Test results and test report Data to be recorded Test report General information Main results Marking Documentation Technical data sheet General description Performance characteristics Instructions General Physical description Additional heating devices, if integrated in unit Control and safety Instructions for installation Instructions for maintenance Annex A (normative) Load profiles Annex ZA (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 814/2013 aimed to be covered Annex ZB (informative) Relationship between this European Standard and and the ecodesign requirements of Commission Regulation (EU) No 812/2013 aimed to be covered Annex ZC (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 813/2013 aimed to be covered Annex ZD (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 811/2013 aimed to be covered Bibliography Figures Figure 1 Stages and order of the tests Figure 2 Illustration of a test for one possible load profile Figure 3 Test procedure for SMART CYCLE Tables Table 1 Uncertainties of measurement for indicated values

8 SS-EN 16147:2017 (E) Provläsningsexemplar / Preview Table 2 Variations allowed for the test conditions when the heat pump is running Table 3 Test conditions applicable to all systems Table 4 Test conditions for particular types of systems Table 5 Maximum ventilation exhaust air available dependent on declared load profile Table 6 Example of a series of load profiles Table 7 k-values Table 8 Operating conditions Table 9 Determination of wet bulb temperature related to dry bulb temperature Table 10 Data to be recorded Table 11 Additional data to be recorded for smart cycle test Table 12 Presentation of main results Table A.1 Load profiles 3 XS to S Table A.2 Load profiles M to XL Table A.3 Load profiles XXL to 4 XL Table ZA.1 Correspondance between this European Standard and Commission Regulation (EU) No 814/2013Correspondence between this European Standard and Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks and Commission s standardization request M/534 (Ecodesign Water Heaters) Table ZB.1 Correspondence between this European Standard and Commission Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device and Commission s standardization request Full reference to the request M/534 (Ecodesign Water Heaters) Table ZC.1 Correspondence between this European Standard and Commission Regulation (EU) No 813/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heaters and Commission s standardization request M/535 (Ecodesign Space Heaters) Table ZD.1 Correspondence between this European Standard and Commission Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device and Commission s standardization request Full reference to the request M/535 (Ecodesign Space Heaters)

9 SS-EN 16147:2017 (E) European foreword This document (EN 16147:2017) has been prepared by Technical Committee CEN/TC 113 Heat pumps and air conditioning units, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 16147:2011. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA, ZB, ZC and ZD, which are an integral part of this document. Note that the following provides details of significant technical changes between this document and the previous edition: a) re-structuring of the standard into the Clause 5 "Installation requirements", Clause 6 "Settings and test conditions", Clause 7 "Performance tests", Clause 8 Other tests and Clause 9 Test results and test report ; b) update of Table 1 "Uncertainties of measurement for indicated values" in terms of units; c) update of the performance test regarding the stages (i.e. A. to F.) and the order of the tests (see 7.2); d) introduction of 7.11 "Calculation of the smart control factor SCF" and 7.12 Determination of the ambient correction term Q on the basis of the European Standard EN 50440:2015; cor e) introduction of "Calculation of the Annual Consumption of electric energy"; f) re-allocation and revision of the former "tapping cycles into the new annex "Load profiles" (see Tables A.1 to A.3); g) introduction of 7.14 "Other performances" regarding rated heat output and seasonal coefficient of performance; h) addition of the Annex ZA and Annex ZB for the relationship between this European Standard and the requirements of Commission Regulation (EU) No 814/2013 and (EU) No 812/2013; i) addition of the Annex ZC and Annex ZD for the relationship between this European Standard and the requirements of Commission Regulation (EU) No 813/2013 and (EU) No 811/2013. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 5

10 SS-EN 16147:2017 (E) Provläsningsexemplar / Preview 1 Scope This European Standard specifies methods for testing, rating of performance and calculation of water heating energy efficiency of air/water, brine/water, water/water and direct exchange/water heat pump water heaters and heat pump combination heaters with electrically driven compressors and connected to or including a domestic hot water storage tank for domestic hot water production. This European Standard comprises only the testing procedure for the domestic hot water production of the heat pump system. NOTE 1 Testing procedures for simultaneous operation for domestic hot water production and space heating are not treated in this standard. Simultaneous means that domestic hot water production and space heating generation occur at the same time and may interact. NOTE 2 For heat pump combination heaters the seasonal efficiency of space heating is determined according to EN This European Standard only applies to water heaters which are supplied in a package of heat pump and storage tank. In the case of water heaters consisting of several parts with refrigerant connections, this European Standard applies only to those designed and supplied as a complete package. This European Standard does not specify requirements of the quality of the used water. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN , Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms, definitions and classification EN , Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions EN , Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods EN , Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC ) EN , Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC ) EN , Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection (IEC ) 6

11 SS-EN 16147:2017 (E) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN and the following apply. 3.1 heat pump water heater water heater that uses ambient heat from air source, water source or ground source, and/or waste heat for heat generation 3.2 heat pump combination heater heat pump space heater that is designed to also provide heat to deliver hot drinking or sanitary water at given temperature levels, quantities and flow rates during given intervals, and is connected to an external supply of drinking or sanitary water 3.3 domestic hot water water heated for household or similar purposes 3.4 storage volume V m measured volume of the tank 3.5 non heated space air heat source for a heat pump which absorbs heat by an air heat exchanger in direct contact with the air inside a non-heated space within a building 3.6 indoor air heat source for a heat pump which absorbs heat by an air heat exchanger in direct contact with the air inside a heated space within a building 3.7 coefficient of performance for domestic hot water COP DHW coefficient of performance which is determined by the use of a reference load profile and which includes the heat losses of the storage tank 3.8 reference hot water temperature θ' WH temperature determined as the mean temperature value of the average temperatures during one single draw-off which ends when the hot water temperature is below 40 C 3.9 mixed water at 40 C V 40 quantity of water at 40 C, which has the same heat content (enthalpy) as the hot water which is delivered above 40 C at the output of the water heater 7

SVENSK STANDARD SS-EN ISO :2006/A1:2014

SVENSK STANDARD SS-EN ISO :2006/A1:2014 SVENSK STANDARD SS-EN ISO 11979-10:2006/A1:2014 Fastställd/Approved: 2014-08-10 Publicerad/Published: 2014-10-01 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 11.040.70 Ögonimplantat Intraokulära