SPLIT SYSTEM AND VRF SYSTEMS PRODUCT GUIDE

Size: px

Start display at page:

Download "SPLIT SYSTEM AND VRF SYSTEMS PRODUCT GUIDE"

Maria Perry
5 years ago
Views:

1 SPLIT SYSTEM AND VRF SYSTEMS PRODUCT GUIDE 2016

2 The first for climate

3 Aermec philosophy There is no challenge in terms of climate that Aermec cannot solve. A complete range of solutions that is characterised in terms of design quality, materials and performances, able to meet the customer requirements within a number of specific applications.

4 The numbers of success Aermec has more than 650 employees, with over 130,000 m2 of total industrial space and a turnover close to 200 million Euros. These numbers place Aermec among the the world leaders in air conditioning technology.

5 A world power The aim of Aermec is not simply to supply products, but to offer solutions with complete and integrated systems. 10 sales subsidiaries and affiliates together with over 70 international distributors offer dedicated consulting services in every continent, while in Italy Aermec operates through 59 sales branches and 78 Customer After-sales Service Centres.

6 The ideal climate always The Aermec air conditioners dedicated to the Residential Sector and Light Commercial ensure an ideal climate all year round. A complete range, able to solve any air conditioning problem: this is Aermec for room air conditioners.

7 FULL INVERTER TECNOLOGY The Full Inverter technology of Aermec offers multiple benefit in terms of a more precise and constant temperature, low energy consumption, significant sound reductions and greater reliability Temperatura Indoor Temperature interna C -3 C Tempo Inverter Modello ad Inverter Model Traditional Modello Model Tradizionale Greater comfort and a significant seasonal energy saving It is the most modern offered by electronic technology applied to air conditioning. It is a system capable of maintaining ideal conditions of comfort in the environment by running the air conditioner at variable power and speed, without ongoing switch-offs and on, typical of traditional equipment: maximum speed and power when needed, gradual and automatic slowdown to constantly adapt, and without changes, to the environment s request. This means greater comfort deriving from the absence of sudden temperature changes and a large seasonal energy saving - up to 30% less - due to the efficiency increase of the cooling circuit. In heat pump functioning, a further efficiency recovery is added to these advantages in the cycle reverse and defrosting phases of the outdoor heat exchanger. The microprocessor system keeps all appliance functional parameters under control and acts on the power supply frequency of the compressor in a way to prevent breakdowns or malfunctioning. 8

Inverter DC Twin Rotary Compressors They ensure greater reliability

remarkably quiet operation, thanks to the reduction of vibrations

Greater reliability and Less maintenance Extremely accurate control

traditional air conditioners Inverter DC fan motor The Inverter

8 Inverter DC Twin Rotary Compressors They ensure greater reliability in terms of Energy Efficiency and Energy Saving, as well as a remarkably quiet operation, thanks to the reduction of vibrations generated during functioning. Greater reliability and Less maintenance Extremely accurate control of the compressor rotation speed, with a saving of 50% more than traditional air conditioners Inverter DC fan motor The Inverter technology applied to the fan motor allows reaching the desired temperature more effectively, reducing electrical charge losses. 9

IG ENERGY EFFICIENCY To achieve the objectives of 20/20/20 (20% reduction of CO2 emissions, 20% increase in energy production from renewable sources, 20% reduction of primary energy consumption,

9 IG ENERGY EFFICIENCY To achieve the objectives of 20/20/20 (20% reduction of CO2 emissions, 20% increase in energy production from renewable sources, 20% reduction of primary energy consumption, within 2020), the EU issued Directive ErP (Energy related Products) that specifies the minimum efficiency requirements of different equipment, including air conditioners. SK260W SK260 Cooling: Energy class Load capacity SEER Annual consumption Noise: Noise level indoor unit Noise level outdoor unit SEER A +++ A ++ A + A B C D kw 2,6 SEER 8,5 kwh/annum dB 63dB Example of energy label and limit values for the different Classes of efficiency SCOP A +++ A +++ A +++ A +++ A ++ A + A B C D kw 2,8 SCOP 6,1 kwh/annum 643 2,8 5,1 769 A + 4,0 4, /2011 eating (mid season): Energy class Load capacity SEER Annual consumption eating (low season): Energy class Load capacity SCOP Options Annual consumption eating (high season): Energy class Load capacity SCOP Annual consumption In particular, for air conditioners with power below 12 kw, from 1 January 2013 energy efficiency is assessed on the basis of new seasonal efficiency indices (SEER for cooling mode and SCOP for heating mode). On these new parameters of seasonal efficiency is based the new energy label (also in force since 1 January 2013). The new energy label shows both the Seasonal Efficiency Class of the product (in compliance with EN14825) and the noise values of the indoor and outdoor units. Energy Efficiency Class Cooling A+++ SEER 8,50 A SEER < 8.50 A SEER < 6.10 A 5.10 SEER < 5.60 B 4.60 SEER < 5.10 C 4.10 SEER < 4.60 D 3.60 SEER < 4.10 E 3.10 SEER < 3.60 F 2.60 SEER < 3.10 G SEER < 2.60 Energy Efficiency Class eating A+++ SCOP 5.10 A SCOP < 5.10 A SCOP < 4.60 A 3.40 SCOP < 4.00 B 3.10 SCOP < 3.40 C 2.80 SCOP < 3.10 D 2.50 SCOP < 2.80 E 2.20 SCOP < 2.50 F 1.90 SCOP < 2.20 G SCOP < 1.90 Electronic Expansion Valve Allows for a very precise, stable and reliable adjustment of the refrigerant flow with consequent increase in efficiency 10

10 FUNCTIONING GUARANTEED The Aermec Split System units ensure high environmental comfort and can also be used in very cold climates, thanks to the Low eating, Low Cooling and Anti-freeze functions. Low Cooling: functioning in Cooling mode with outdoor temperatures up to -15 C Low eating: functioning in eating mode with outdoor temperatures up to -20 C -15 C Low Cooling -20 C L ow eating -5 C 8 C Anti-freeze Anti-freeze Function This special function automatically starts the unit in heating mode as soon as a temperature below 8 C is detected in the indoor environment. It is very useful in buildings located in areas with very low temperatures. 11

TE COMFORT OF SILENCE NIGT COMFORT (SLEEP MODE) The various settable programs act on the room temperature during the night, adapting it to the curve of the body temperature, thus avoiding an

11 TE COMFORT OF SILENCE NIGT COMFORT (SLEEP MODE) The various settable programs act on the room temperature during the night, adapting it to the curve of the body temperature, thus avoiding an excessive cooling or heating. All this allows for a significant energy saving and a better quality of sleep. Cooling / Dehumidification Temperature Temperatura C Curva della Curve variazione of temperature di temperatura change Fascia Time period Oraria (h) Temperature Temperatura C eating Curve of temperature change Energy saving & Better Quality of Sleep Time Fascia period Oraria (h) (h) SILENCE TESTED The reduced noise levels stem from intense tests in the advanced Aermec semi-anechoic rooms, allowing the identification and elimination of any source of noise. 12

WIDE ADJUSTMENT RANGE OF TE AIR FLOW MULTISPEED FAN The Indoor Units are

set with minimal noise and in the shortest possible time, ensuring

L E V E L Maximum Silence QUIET For an extremely quiet functioning F A N

12 WIDE ADJUSTMENT RANGE OF TE AIR FLOW MULTISPEED FAN The Indoor Units are equipped with multispeed fans that allow reaching the room temperature set with minimal noise and in the shortest possible time, ensuring maximum comfort in any room. L E V E L Maximum Silence QUIET For an extremely quiet functioning F A N Maximum Speed Maximum Comfort in every room TURBO FUNCTION To reach the desired temperature in the shortest possible time. 13

CLEAN AND PURIFIED AIR In an increasingly polluted environment it is fundamental for well-being and health, to ensure a high level of air purity.

13 CLEAN AND PURIFIED AIR In an increasingly polluted environment it is fundamental for well-being and health, to ensure a high level of air purity. Aermec achieves the objective with sophisticated filtering technologies able to ensure healthy and clean air in all circumstances. AIR IONISER (COLD PLASMA GENERATOR) It is able to reduce pollutants by breaking down the molecules by electrical discharges, decomposing water molecules in the air, into positive and negative ions. These ions neutralise the molecules of gaseous pollutants, obtaining products that are normally present in clean air. The device is able to eliminate 90% of bacteria. The result is clean, ionised air and without bad smells O O - 2 O Clean, ionised air and without bad smells. O O O O O O O O Polvere Elettrodo Polvere Caricata Elettrostaticamente Superficie elettrostatica di raccolta Aria Purificata Electrostatic Dust Filter Thanks to the electrostatic charge, the filter retains dust and other impurities, thereby purifying the air. The filter can be easily removed for normal maintenance operations. Functioning principle of the Electrostatic Dust Filter (electrically powered) 14

TE IDEAL ENVIRONMENT Proper air diffusion and maintenance of the desired temperature in the room, is a basic requirement to ensure a better comfort for the human being.

14 TE IDEAL ENVIRONMENT Proper air diffusion and maintenance of the desired temperature in the room, is a basic requirement to ensure a better comfort for the human being. I FEEL This function detects the room temperature based on the sensor located inside the remote control and not on the medium temperature sensor inside the indoor unit. You will, therefore, have a more precise temperature control, greater comfort and energy saving. 20 C 20 C ON 20 C 26 C OFF I FEEL AIR DISTRIBUTION IN TE ROOM Indoor Units equipped with motorised air distribution systems, in horizontal and vertical, depending on the models, for optimum air flow control. Extra orizontal Louver Active in eating Mode to improve air distribution and avoid stratification. Extra orizontal Louver Retractable in Cooling Mode. 15

TE ANSWER TO EVERY NEED Wide range of indoor units available WALL Wall installation SK - SE - MKM - MVA - MDW - MVF - MDS CASSETTE Suspended ceiling installation LCI - MKM - MVA - MDW - MVF - MDS

15 TE ANSWER TO EVERY NEED Wide range of indoor units available WALL Wall installation SK - SE - MKM - MVA - MDW - MVF - MDS CASSETTE Suspended ceiling installation LCI - MKM - MVA - MDW - MVF - MDS DUCT orizontal ceiling and ducted installation LCI - MKM - MVA - MDW - MVF - MDS FLOOR CEILING Floor and ceiling installation LCI - MKM - MVA - MDW - MVF - MDS CONSOLE Floor installation CK - MKM - MVA - MDW - MVF - MDS COLUMN Installation in large environments SC - MKM - MVA - MDW - MVF - MDS The different types of Indoor Units can be combined and applied to meet the most varied engineering solutions, ensuring always the maximum energy efficiency and saving. Monosplit: one outdoor unit connected to an indoor unit. it is the ideal and practical solution to condition one room, usually with limited space, at a convenient price. Multisplit: one outdoor unit connected to multiple indoor units. it is a complete system to condition several rooms, controlling them individually, obtaining the ideal climate in each room. The connectable indoor units can be of different types depending on both engineering and design requirements. VRF System: a complete system consisting of several outdoor units, single or modular, connected to a wide range of indoor units, that allow the total control of the individual zones. Functioning flexibility, high energy yield and a quick and easy installation, are the perfect solution in commercial buildings. 16

16 EASE AND SOPISTICATION IN USE The controller for every need A wide range of remote controls allow for a simple and intuitive management of the system. Infrared ray remote controls with back-lit liquid crystal display and Wired panels for controlling all functions. Telecomdandi Pannelli a filo REMOTE CONTROLS AND WIRED PANELS STANDARD WIT INDOOR UNITS MONOSPLIT Indoor Units SK_W SE_W SC_V FK CK_FS LCI_CS LCI_C LCI_CB LCI_D LCI_F MULTISPLIT Indoor Units MKM SK_W MKM SE_W MKM F MKM D MKM C MKM CS MKM FS VRF SYSTEM Indoor Units MVA W MVA CS MVA C MVA CB MVA F MVA D MVA FS MVA V Indoor Units MDW MDS_WN MDW MDS_F MDW MDS_D MDW MDS_C MDW MDS_CS Indoor Units MVF MDS_WN MVF MDS_F MVF MDS_D MVF MDS_C 17

17 WIFI - KIT KIT Plug & Play module to install in the Indoor Unit for Wi-Fi control. With this Accessory and the special App for ios and Android devices available for free on Apple Store and Google play, you can control the system remotely from your Smartphone or Tablet. The remote control can be Direct (Direct Wi- Fi) or through Cloud, using a Wireless Router connected to Internet. Direct Wi-Fi Aermec Cloud 18

SE R410A Reversible Split System eat Pumps igh Wall Type Monosplit Cooling Capacity 2,5 6,5kW eating Capacity 2,7 7,0kW SE_W Maximum Seasonal Energy Efficiency (Refer to the Technical Data) SE

Five modes of operation (cooling, heating, dehumidification, ventilation Automatic and Only), to guarantee optimum comfort.

The indoor units SE, ensure comfort throughout the year by distributing air quietly.

18 SE R410A Reversible Split System eat Pumps igh Wall Type Monosplit Cooling Capacity 2,5 6,5kW eating Capacity 2,7 7,0kW SE_W Maximum Seasonal Energy Efficiency (Refer to the Technical Data) SE Features Split eat Pump suitable for cooling / heating in the residential environment. New design features and modern forms that are well suited to any style of interior. Five modes of operation (cooling, heating, dehumidification, ventilation Automatic and Only), to guarantee optimum comfort. The environmental comfort is also closely related to the sound level and is especially important in studies and bedrooms. The indoor units SE, ensure comfort throughout the year by distributing air quietly. Operation eat Pump with reverse cycle refrigerator and defrost control Fan tangential 4 speed directly selected (Minimum, Average, Maximum, Turbo) DC Inverter rotary compressor Microprocessor control Infrared remote controller with liquid crystal display to control all functions Emergency control possibility if the remote controller batteries are flat (Button AUTO on internal unit) Front panel display showing operating modes and temperature. The display can be activated or deactivated from the remote controller (LIGT) A handy timer allows you to set up and program the startup and shutdown within a time span of 24 hours, the hours you select, and even in your absence. Function Night Comfort (SLEEP) The function adjusts the room temperature by reproducing the curve of body temperature during the night, thus ensuring an adequate physical and mental rest, whose benefi translate into increased productivity and efficiency. Extended Ventilation (X-FAN) function prevents the growth of mould in the internal unit during Cooling and Dehumidification Modes Intelligent pre-heat function to prevent jets of cold air (eating Mode) Auto-diagnostic function Auto-Restart function after a power cut External unit defrost function External unit with condensate connection Cleanable air filter orizontally adjustable air discharge louvres Motorised deflector louvres controlled by the remote controller to vertically adjust the discharge air, with 5 fixed positions or floating (SWING) Flare type refrigerant connections Simple installation and maintenance 24

19 Technical data Internal Unit SE250W SE350W SE500W SE700W External Unit SE250 SE350 SE500 SE700 Cooling Capacity nominal kw 2,50 3,20 5,27 6,45 (min max) kw (0,60-2,80) (0,60-3,50) (1,26-6,60) (2,53-6,80) Power input nominal kw 0,80 1,02 1,62 2,18 (min max) kw (0,12-1,30) (0,12-1,40) (0,38-2,65) (0,60-2,65) Condensate rate l/h 0,8 1,4 1,8 2,0 Energy efficiency class (1) A + A ++ A ++ A ++ Seasonal Energy SEER 5,8 6,1 6,1 6,1 Efficiency Pdesignc kw 2,5 3,2 5,2 6,4 eating Capacity nominal kw 2,75 3,40 5,80 7,00 (min max) kw (0,60-3,00) (0,60-3,80) (1,12-6,80) (2,53-7,60) Power input nominal kw 0,78 0,99 1,76 2,22 (min max) kw (0,12-1,40) (0,12-1,50) (0,35-2,65) (0,60-2,80) Seasonal Energy Energy efficiency class (1) A + A + A + A + Efficiency SCOP 4,0 4,0 4,0 4,0 (evarage) Pdesignh 2,5 3,2 4,5 5,8 EER (2) 3,12 3,14 3,25 2,96 COP (2) 3,53 3,42 3,30 3,15 Power input nominal (3) kw 1,4 1,5 2,6 2,8 Internal unit SE250W SE350W SE500W SE700W Air flow rate max/med/min m 3 /h 400/300/ /300/ /650/ /700/550 Sound power max/med/min db(a) 46/43/40 47/43/40 53/50/45 57/52/49 Sound pressure /max/med/min db(a) 34/31/28 34/31/28 43/37/33 47/42/39 External Unit SE250 SE350 SE500 SE700 Air flow rate max m 3 /h Sound power max db(a) Sound pressure max (4) db(a) Compressor type Rotary DC Inverter Refrigerant Liquid inch 1/4" 1/4" 1/4" 1/4" Connections Gas inch 3/8" 1/2" 1/2" 5/8" Liquid mm / inch 6,35 / 1/4" 6,35 / 1/4" 6,35 / 1/4" 6,35 / 1/4" Refrigerant Lines Gas mm / inch 9,52 / 3/8" 12,7 / 1/2" 12,7 / 1/2" 15,9 / 5/8" piping length max m drop max m Power supply V ~ z V~50z Cooling (EN e EN-14825) Ambient air temperature 27 C b.s/ 19 b.u.; External air temperature 35 C; Max speed; Refrigerant line length 5m eating (EN e EN-14825) Ambient air temperature 20 C b.s; External air temperature 7 C b.s/ 6 C b.u; Max speed; Refrigerant line length 5m min = minimum speed; max = maxim speed (1) In accordance with Standard EN-14511e EN (2) EER/COP in accordance with (EN-14511) (3) The rated power input is the maximum electrical power absorbed by the system, according to the legislation EN e EN (4) Sound pressure measured at 1m distance from front in semi-anechoic chamber. Dimensional and Weight A A SE_W B C SE B C SE250W SE350W SE500W SE700W SE250 SE350 SE500 SE700 eight A mm Width B mm Depth C mm Weight kg

SPLIT SYSTEM AND VRF SYSTEMS PRODUCT GUIDE

SPLIT SYSTEM AND VRF SYSTEMS PRODUCT GUIDE 2016 The first for climate Aermec philosophy There is no challenge in terms of climate that Aermec cannot solve. A complete range of solutions that is characterised