Unica Comfort / / EN Instructions for use / assembly instructions. Produktion überwacht.

Transcription

1 Bauart geprüt Produktion überwacht EN Instructions for use / assembly instructions 2 tuev-sued.de/ ps-zert Unica Comfort / /

2 English Safety Notes Gloves should be worn during installation to prevent crushing and cutting injuries. The shower system may only be used for bathing, hygienic and body cleaning purposes. Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you. Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device between the fitting and the hose. Intended use of the handle: The handle is not a medical product, it is not intended for physically impaired persons, but only for general private use. Check the proper attachment and tight seating of the installed products periodically (annually). Installation Instructions Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured. The pipes and the fixture must be installed, flushed and tested as per the applicable standards. The plumbing codes applicable in the respective countries must be oberserved. Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer's indications of the dowel manufacturer have to be taken into account. The mesh washer must be insert to protect the overhead shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims. For removal of the installed EcoSmart (flow limiter) from the shower, the pressure must be lower than 0.2 MPa. With a pressure of more than 0.2 MPa, the EcoSmart must not be removed. Optimal functioning is only guaranteed with the combination of Hansgrohe hand showers and Hansgrohe shower hoses. Technical Data Operating pressure: max. 0,6 MPa Recommended operating pressure: 0,15-0,4 MPa (1 MPa = 10 bar = 147 PSI) Hot water temperature: max. 60 C Thermal disinfection: max. 70 C / 4 min The product is exclusively designed for drinking water! Symbol description Do not use silicone containing acetic acid! Dimensions (see page 32) Flow diagram (see page 33) Operation (see page 34) Cleaning (see page ) and enclosed brochure Spare parts (see page 36) Special accessories (order as an extra) tile-matching-disk chrome plated # Test certificate (see page 36) Assembly see page

3 Montage Montage 1a b Silikon 2. SW 8 mm mm SW 2 mm 2. 31

4 Unica Comfor21000 / max.243 Ø 25 max Ø Ø Ø Unica Comfort /

5 MPa 0,50 0,45 0,40 0, 0,30 0,25 0,20 0,15 0,10 0,05 0,00 Q = l/min Q = l/sec 0 0,1 0,2 0,3 0,4 0,5 5,0 4,5 4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0,0 bar RainAir 1 Whirl 2 Rain 3 33

6 Bedienung Bedienung Whirl Rain leichter plus facile easier plus facile más ligero lichter lettere piú allentato słabiej snazší l ahšie 更加简单 легче könnyebb helpommin 34 lättare lengviau lakše daha hafif mai uşor ευκολότερα lažje kergem vieglāks lakši lettere лек më i lehtë ﻞﻬﺳأ Rain Air schwerer mais dificil harder plus difficile más pasedo zwaarder tyngre piú serrat mocniej obtížnější t ažšie 更坚固 стабильнее nehezebb vaikeampi tyngre sunkiau Teže ağır mai greu βαρύτερα težje raskem smagāks teže tyngre по-трудно më e rëndë ﺐﻠﺻأ

7 Reinigung > 1 min 5

8 Serviceteile Serviceteile / EcoSmart (9 l/min) (45x2,5) (50x2,5) (M4x5) Prüfzeichen P-IX DVGW SVGW ACS WRAS / X / X 36 Hansgrohe Auestraße 5-9 D Schiltach Telefon +49 (0) 78 36/ Telefax +49 (0) 7836/ info@hansgrohe.com Internet: 01/