TECHNICAL DATA - STANDARD CONFIGURATION. Stainless steel, exchangeable and washable. Compressor

Transcription

1 areco supersnow snowmakers All automatic snowguns are equipped with OptiFlow technology. Automatic snowguns are fitted with: Sensor for humidity, air temperature, water temperature and water pressure after filter Automatic water pressure regulation Adjustable swivel sector between º. Options: Bluetooth remote control Radio- or cable communication 32 large nozzles Electric vertical adjustment of the drum GSM alarm Areco Supersnow can also be acquired in its manual version. - STANDARD CONFIGURATION Electric system 400 V 50 Hz alt. 480 V 60 Hz Fan motor 15 kw Compressor 4kW Heater max. power 5,3 kw, 400 V /5,5 kw, 480 V Nozzle ring 3 x1660 W Water box 1 x 315 W, 400 V 1 x 500 W, 480 V Sound level (20m range) Front 65 dba Back 65 dba Side 62 dba Water nozzles 300 pcs Atomizer nozzle rings 20 pcs Fan drum Stainless steel Chassis Galvanized Assembly 3-wheel chassis/levelling legs Operational modes automatic/manual Water filter Stainless steel, exchangeable and washable Water box Stainless steel Water connection 2 Kamlok stainless steel Power connection 63 A CEE connector Min. water pressure 8 bar Max. water pressure 40 bar Snowmaking surface Max 3200 m2 Weight manual with levelling legs 660 kg manual with wheels 690 kg automatic with levelling legs 685 kg automatic with wheels 715 kg Length 2400 mm Width 2400 mm Height 2200 mm

2 areco standard snowmakers All automatic snowguns are equipped with OptiFlow technology. Automatic snowguns are fitted with: Sensor for humidity, air temperature, water temperature and water pressure after filter Automatic water pressure regulation Adjustable swivel sector between º. Options: Bluetooth remote control Radio- or cable communication 32 large nozzles Electric vertical adjustment of the drum GSM alarm Areco Standard can also be acquired in its manual version - STANDARD CONFIGURATION Electric system 400 V 50 Hz alt. 480 V 60 Hz Fan motor 9 kw Compressor 4 kw Heater max. power 5,3 kw, 400 V/5,5 kw, 480 V Nozzle ring 3x1660 W Water box 1x 315 W, 400 V 1x 500 W, 480 V Sound level (20 m range) Front 63 dba Back 64 dba Side 61 dba Water nozzles 300 pcs Atomizer nozzle rings 20 pcs Fan drum Stainless steel Chassis Galvanized Assembly 3-wheel chassis/levelling legs Operational modes automatic/manual Water filter Stainless steel, exchangeable and washable Water box Stainless steel Water connection 2 Kamlok stainless steel Power connection 63 A CEE connector Min. water pressure 8 bar Max.water pressure 40 bar Snowmaking surface Max 2800 m2 Weight manual with levelling legs 660 kg manual with wheels 690 kg automatic with levelling legs 685 kg automatic with wheelsl 715 kg Length 2400 mm Width 2400 mm Height 2150 mm

3 areco e-line snowmakers All automatic snowguns are equipped with OptiFlow technology. Automatic snowguns are fitted with: Sensor for humidity, air temperature, water temperature and water pressure after filter Automatic water pressure regulation Adjustable swivel sector between º. Options: Bluetooth remote control Radio- or cable communication 300 nozzles GSM alarm 15kW fan motor Connection for central air system - no compressor Another tower height Areco e-line can also be acquired in its manual version. - STANDARD CONFIGURATION Electric system Fan motor Compressor Heater max. power Nozzle ring Water box Sound level (20 m range) Front 63 dba Back 64 dba Side 61 dba Water nozzles Atomizer nozzle rings Fan drum Chassis Assembly 400 V 50 Hz alt. 480 V 60 Hz 9 kw 4 kw 5,3 kw, 400 V/5,5 kw, 480 V 3 x 1660 W 1 x 500 W, 480 V 1 x 315 W, 400 V 32 pcs 20 pcs Stainless steel Galvanized 1,6 m tower Operational modes automatic/manual Water filter Stainless steel, exchangeable and washable Water box Stainless steel Water connection 2 Kamlok stainless steel Power connection 63 A CEE connector Min. water pressure 12 bar Max. water pressure 40 bar Snowmaking surface Max 3200 m² Weight excl. tower 455 kg Weight tower 100 kg Length 1340 mm Width 1045 mm Height 3500 mm

4 s10-2 air water sticks An air water stick with impressive features: Reliable snowmaking operation Simple handling Assembly with little maintenance Optional: Skiing Path Lance TRACK automatic version nozzles switchable left and right / or both sides S10-2 is a snowmaking stick for marginal temperatures. GENERAL Water flow rate* Snowmaking capacity* Water pressure Height** Weight base frame Weight pipe and nozzle head** * With POWER-equipment: 4 x x 40 ** With 10 m length of the pipe TYPES Compressor manual Central air manual Compressor automatic Central air automatic Skiing path lance TRACK 61 to 244 l/min approx. 9.5 to 36.5 m3/h 20 to 90 bar 11 m 50 kg 80 kg NOZZLES Nozzles overall Nucleator nozzles Material Water nozzles fix Water nozzles switch on Material ADDITIONAL Data transmission radio Temperature and humidity sensor Hydraulic lifting device 8 pieces 2 pieces brass 4 pieces 2 pieces brass

5 s10-4 air water sticks The four nozzle groups permit eight combination possibilities and switching steps. Constantly high snow quality over the whole spectrum of temperatures. The air water stick S10-4 offers best snow quality at marginal temperatures. These are the qualities of the air water stick: Start of snowmaking at marginal temperature ranges Optimum regulating reaction Simple operation GENERAL Water flow rate* Snowmaking capacity* Water pressure Height** Weight base frame Weight pipe and nozzle head** * With equipment: 2 x x x x 40 ** With 10 m length of the pipe TYPES Compressor manual Central air manual Compressor automatic Central air automatic 31 to 365 l/min approx. 4.7 to 55 m3/h 20 to 90 bar 11 m 50 kg 93 kg NOZZLES Nozzles overall Nucleator nozzles Material Water nozzles fix Water nozzles switch on Material ADDITIONAL Data transmission radio Temperature and humidity sensor Hydraulic lifting device 10 pieces 2 pieces brass 2 pieces 3 x 2 pieces brass

6 hydrant drive automation With the hydrant drive, each snowmaking installation operates independently. The hydrant drive is distinguished by its high flexibility and by the low investment costs. Therefore a simple and cost-effective automation of existing installations is possible within a short time. Integrated battery for automatic closing in case of power failure Battery-mode for easy mounting of the drive on a hydrant Torque progressively adjustable separately for opening and closing Repeated monitoring with nominal torque during the closing phase - number of repetitions adjustable Low rotational speed, making also exact adjustment of the operating pressure for hydrants with poor control characteristics possible Monitoring of the running period during the opening sequence The drive is transportable only one drive is necessary per snowmaker. The drive is fitted onto standard hydrants with the aid of an adapter. GENERAL Distribution Voltage 230 VAC ± 10% Nominal Output 30 W Rotation Speed 1.9 min-1 Torque separately adjustable for opening and closing max. 50 Nm Temperature range -30 C to +50 C Protection IP 65 DIMENSIONS Length 170 mm Width 100 mm Height 470 mm Weight 7.5 kg

7 supersnow v7 software automation With the software SUPERSNOW V7 and a central unit, your snow system can be visualized and controlled via a PC. The software SUPERSNOW V7 saves time, money and staff. Operating system: Microsoft Windows XP / Microsoft Windows 7 / Microsoft Windows Server Display of current operating status of all components The entire process is easily and orderly controlled Graphic illustration of the pumping station Storage of all operational data for further evaluation

8 bluetooth remote control automation Comfortable and easy remote control of the machines Enormous time saving for snowmaking solutions on tower, swivel arm or gunlifter Simple menu navigation Compatible program suitable for various mobile phone manufacturers Efficient use of the system with the Bluetooth Interface from ARECO. RANGE RECALLABLE DATA up to 20m outdoors Wet bulb temperature Temperature Humidity Water pressure Water flow rate Water temperature Hydrant number Operating condition COMMANDS Start / Stop snowmaker Start / Stop swivelling Snow quality Maximal flow rate Start temperature Movements Up, down, left, right SOFTWARE Operating system: Android from 2.2 for mobile phones with touch-screen or tablet PC Windows Mobile 6.1 Required resolution: 300 x 200

9 weather station automation The following measurements are made: Temperature Humidity Wet bulb temperature Direction of the wind Wind speed The weather station can also be used as a repeater. Distribution voltage 230 VAC ± 10% Nominal output depending on data transmission 8 W to 40 W Sensor air temperature RTD Pt C to +60 C Sensor air humidity Hygromer C94 0 %rh to 100 %rh Sensor wind direction Precision potentiometer 0 to 360 Sensor wind speed AC generator 0.6 m/s to 60 m/s DIMENSIONS Width control box Height control box Depth control box Weight 400 mm 300 mm 210 mm 12 kg

10 swivelarm accessories Up to 120m throw distance. 360º swivel field. Due to the substantial 8m snowfall height, the water flow rate is significantly higher, thus resulting in a much greater efficiency. Max. work load 900kg Work load 600kg Allowed wind speed permanent 140km/h Max. wind speed 200km/h Max. height during snowing +8,3m Min. height during snowing -0,5m Max. operating range 8,8m Horizontal swivel area 360º Complete pillar (standpipe & rotate pipe) Cantilever with connection Hydraulic cylinder Machine support Parallel pipe (water pipe) Parallel stake (cable lines) Cabel guide Control box/elect. box incl.cables Hydraulic aggregate complete Small parts (anchor, etc) Hydraulic oil (40 L) kg 450 kg 129 kg 125 kg 50 kg 55 kg 10 kg 115 kg 48 kg 20 kg 34 kg kg

11 gunlifter II accessories Increased throw distance Higher snowmaking capacity Better snow distribution Even better snow quality Starts even earlier at marginal temperatures Suitable for the following snowmaking machines: ARECO Supersnow ARECO Standard 4m TOWER 6m TOWER Height 4.90 m 6.62 m Weight of tower 345 kg 428 kg Weight of sledge 105 kg 105 kg Weight of chain block 14 kg 14 kg Load capacity 680 kg 680 kg Additional load (ice, snow) 300 kg 300 kg Admissible wind speed 200 km/h 200 km/h Snowmaking positions 8 12 STANDARD EQIPMENT: Electric chain block Foundation plate Device for helicopter transport Central power distributor to supply the chain hoist and the snowmaking machine with the following operating elements: - Start / Stop Automatic system of snowmaking machine - Start / Stop horizontal swivel device - Left / Right for manual horizontal swivelling - Up / Down of sledge - Up / Down of fan tube (vertical adjustment) Dimensioning of foundation for different locations

12 protective mattresses accessories Protection mattresses tailor-made for ski resorts. Density Material 80mm PVC (padding in polyethylene)

13 integrated pump accessories Complete booster pump mounted on an Areco Standard automatic snowgun. Requirements: 63 A fuse Min. incoming water pressure: 0,5 Bar Max. iincoming water pressure: 16 bar Delivered integrated with the snow gun Power supply Nominal output Flow rate Lifting Height Assembly 400 VAC, 3L + N + PE 15 kw 16m3/h 200m On Areco Standard snowgun Option: Submersible feed pump

14 mobile pump station accessories Ideal for snowmaking at, for example, snow parks, cross-country trails, events, etc. Equipped with soft starter and dry run protection. Options: Submersible feed pump Can be customized according to customer s needs Suction hose Heating and insulation Power supply Nominal output standard Flow Lifting height Inlet Outlet Assembly 400 VAC, 3L+N+PE 30 kw 35 m3/h 210 m 3 Kamlok 2 Kamlok Wheel 22 x 11 x 8 Coupling All necessary components are mounted: El. connection 63A CEE connector Soft start Manometer Wheel-chassis with aluminum cover Ball coupling/trailer ring

15 aeris accessories Weather Service AERIS keeps an eye on the weather at your facility. One or more weather stations log weather data continuously so that you can present them to your customers on your website. Aeris has a number of standard solutions for this, but we can also offer customized special solutions. In order to use this service, one purchases one or more subscriptions. A subscription may include one or more weather stations connected to a PC with SuperSnow (Areco s software for data acquisition in a snowmaking system). AERIS is a carefree way to always have the current weather available for you and your customers at your facility.

16 concrete foundation accessories SUPERSNOW concrete foundation: Pre-assembled foundation for air water stick. A flexible solution: no need to carry out formwork or concreting on the slopes or ski tracks. Characteristics: No formwork and concreting on site Compatible with most air water stick types Dimensions (L x W x H): 380 x 380 x 1400 mm (concrete 1200 mm) Weight: approx. 400 kg Inner pipe diameter: 119 mm Also available: Inox quick couplings with inner or outer thread Transition adapters from quick coupling to Storz coupling (fire hose coupling)

17 snow hose & drain adapter accessories Water hose for snowmaking. Wall thickness Nominal diameter Admissible working pressure Test pressure Bursting pressure Weight With quick coupling mm 2 DN 50 mm 40 bar 60 bar 120 bar ca. 630 g/m 2 Kamlok Drain adapter 2 Kamlok: Facilitates the drainage of the snow hose Drains vid water pressures below1.2 bar With quick coupling 2 kamlok stainless steel Inner hose: Polyester textile fabric with an EPDM rubber lining Outer hose: Polyester textile fabric with a polyurethane coating Standard length: 20 m (special lengths available on request)

18 turnkey solutions/streamlining infrastructure From idea to finished solution. We offer: Turnkey solutions Streamlining Planning Construction Assembly Operation Financing

19 pump container infrastructure Turnkey delivered for easy installation. 1, 2 or 3 outgoing pipelines. Options: Automatic valves Passdoor Mansard roof Pump container with soft start or frequency drive. Customized according to customer s needs. 10 or 20 foot insulated container, fitted with heating and lighting. Max 90 kw pump.

20 high pressure hydrant infrastructure Maintenance-free O-ring seal in the head piece Exact adjustment of the water pressure, no vibrations No vertical movement of the operating shaft Detachment of operating shaft and flow controller via the sealed bushing in the head piece Easy mounting of the hydrant drive and the torque support Drainage via one 1 drain valve, opening pressure selectable at 1.2 bar or 2.5 bar DESIGN Base with connecting thread R2 Head piece with quick coupling male R2 Operating pressure base 100 bar Operating pressure head piece 50 bar Standard length according to chart, special lengths available to order LENGTHS In several models from 320mm up to 3000mm. Special lenghts on request. MATERIALS Base Head piece Operating shaft and valve face Quick coupling Flow controller Ascending tube brass CuZn39Pb3 according to DIN aluminum AlCuMgPb according to DIN 1725, anodized inox inox high quality PAS plastic seamless threaded pipe

21 sub-surface tapping station infrastructure Sub-surface tapping station made of concrete segments, passable with lockable hatch of 600 mm x 600 mm and an entrance ladder. Special advantages of this concrete shaft: Easy operation in difficult areas Direct assembly of machines on tower or sticks onto the tapping station Separate delivery of the constructional parts with height of shaft variable in any order Entrance hatch made of fire-galvanized steel, via hinges connected with the frame over the cover plate Available with base Dimensions without covering 1200 mm x 1400 mm x 1649 mm Dimensions with covering 1200 mm x 1400 mm x 1854 mm Weight when empty 1800 kg

22 on-surface tapping station infrastructure The on-surface tapping station - guaranteed easy handling Elektrant in galvanized metal. 1pc 63 A CEE plug 5-pole blocked socket. DIMENSIONS: Height 1200 mm Depth 300 mm Width mm Weight approx. 100 kg including equipment