Parts Catalog ***These are list prices as of 8/2007. Subject to change without notice.***

Transcription

1 Parts Catalog ***These are list prices as of 8/2007. Subject to change without notice.***

2 PA/CAB-002 EVD/CCD/CSR COIN BOX & HOUSING $ The housing bolts to the underneath side of the cabinet on the stand alone machines. The coin box slides out from inside the housing.

3 PA/CAB-003 EVD/CCD/CSR VAULT HOUSING ONLY $54.19 This the housing only for the stand alone machines. It bolts to the under side of the cabinet and holds the coin drawer.

4 PA/CAB-004 EVD/CCD/CSR COIN DRAWER ONLY $54.19 This is the coin box that goes inside the housing and holds the coins on a stand alone machine.

5 PA/CAB-007 EVD WAND HOLDER $15.00 It bolts to the side of the cabinet on the stand alone fragrance machine and holds the fragrance gun.

6 PA/CAB-018 EVD-2 HOSE & HANDLE ASSY. $ It is the complete assembly from cabinet to gun on the two product stand alone fragrance machine. It does not typically come with a push button, but it is necessary to ask the customer because some machines were built with a push button on the handle. There is a different part number for the ones that require a push button.

7 PA/CAB-020 Lock nut EVD-2 HOSE ASSEMBLY ONLY $54.95 This consists of the hose, tubings and ferrules for the two fragrance stand alone machine. It is necessary to ask if the machine has a push button on the handle, because there is a different part number for the hose assembly with the wiring for the button.

8 PA/CAB-021 EVD HANDLE ONLY $19.95 This is the standard empty handle without a hole for push button. It is necessary to ask if the customer has a push button on the handle because there is a separate part number for the empty handle with a hole for button.

9 PA/CAB-022 ATOMIZER FOR EVD-2 $34.50 This is where the air and fragrance mix together then spray out of the gun in the two fragrance stand alone machine. The two small brass barbs are for the two fragrance lines and the large fitting is for the air line.

10 PA/CAB-023 EVD-2 TUBINGS W/ FERRULES $12.00 This is the set of inner tubing for the hose assembly on a two fragrance stand alone machine. It consists of two fragrance lines, an air line (marked with blue) and ferrules. This does not come with the wire for the push button, there is a separate part number for that tubing set. The tubing only comes in a set, not sold separately.

11 PA/CAB-024 LOCK NUT W/SET SCREW $2.50 This goes inside at the base of the fragrance handle to attach the hose.

12 PA/CAB-025 EVD-2 HOSE&HANDLE W/ P.B. $ This is the complete assembly from the cabinet to the gun on a two fragrance stand alone. This one comes with a push button, it is not standard but at one time they were made with a push button on the handle.

13 PA/CAB-026 EVD-2 HOSE ASSY.W/ P.B. $59.95 This is the fragrance dispensing hose and gun on a two fragrance stand alone machine. It is the complete assembly from the cabinet to the gun. The handle on this assembly is for the EVD2s that were made with a push button on the handle.

14 PA/CAB-027 EVD HANDLE ONLY-P.B. TYPE $19.95 This is the fragrance dispensing gun used on the stand alone machines that came wired for a push button. It does not include the atomizer inside or the button.

15 PA/CAB-028 EVD HANDLE W/PUSH BUTTON $23.40 This handle goes on both of the fragrance stand alone machines that have a push button. It does not include the atomizer inside.

16 PA/CAB-029 PUSH BUTTON ONLY-EVD $14.25 It goes on the fragrance gun of a stand alone machine. It is not standard on the stand alone machines but some were made with it on the gun.

17 PA/CAB-030 ABUS LOCK $25.71 This is the lock that goes on the stand alone machines coin box as well as the combo units. It comes with two keys. It will not fit on the units that use the lock block plate with the hasp.

18 PA/CAB-038 EVD-3 HOSE & HANDLE ASSY. $ This is the complete assembly from the cabinet to the gun on a three fragrance stand alone machine. The push button is not standard but some EVD3s were made with a push button on the handle.

19 PA/CAB-039 Is in the tip of the gun. ATOMIZER FOR EVD-3 $35.50 It goes inside the fragrance handle on the three fragrance stand alone machine. The three small barbs are to connect the fragrance lines from the hose to the gun. The large fitting is for the airline and contains a ferrule. It is the same as the FV3 atomizer.

20 PA/CAB-040 EVD-3 HOSE ASSEMBLY ONLY $59.50 This is the hose assembly for the three fragrance stand alone machine, complete with tubing and ferrules. It does not come with the push button, there is a separate part number for the one with push button.

21 PA/CAB-043 EVD-3 HOSE & HANDLE W/P.B. $ This is the fragrance dispensing hose and gun on a three fragrance stand alone machine. It is the complete assembly from the cabinet to the end. The handle on this assembly is for the EVD3s that were made with a push button on the handle.

22 PA/CAB-044 QUART SPRAY BOTTLES $0.00 These go with the spray scent concentrate. The customer gets four of these with a case of 48 concentrates.

23 PA/CAB-045 1/2 GAL. JUGS-EVD-3 $1.50 There are supposed to be two of these in the three fragrance stand alone machine. They hold two fragrances and the third is out of its original gallon container.

24 PA/CAB-049 Lock nut EVD-3 HOSE ASSY. W/P.B. $76.85 This is the inner tubing, wire for push button, ferrules and outer hose for the three fragrance stand alone machine. It is necessary to ask the customer if their machine has a push button on the gun.

25 PA/CAB-051 EVD-3 TUBINGS W/FERRULES $16.00 This is the tubing set for the inside of the hose assembly. There are three product lines and one air line (marked blue). It comes in a set only, tubing is not sold separately.

26 PA/CAB-053 EVD HANDLE SCREWS $1.25 These are the one inch screws that hold the fragrance handle together, eight total. They are included in the price of the handle but if sent out alone they are priced per set.

27 PA/CCD-003 CCD FOAM GENERATOR $49.95 This part goes in the wand of the CCD brush. The air and product lines connect to the barbs and the hole between the screws contains the foam pill, which is where the product dispenses.

28 PA/CCD-004 CCD HOSE ASSEMBLY ONLY $69.95 This hose consist of: outer tubing, internal product and air lines, and wiring. It is used on CCD units.

29 PA/CCD-005 CCD /CSR TOGGLE SWITCH $7.94 Also called an on/off switch. It goes in the wand housing of the CCD/CSR brush. It controls the release of product from the brush.

30 PA/CCD-006 CCD WAND & BRUSH COMPLETE $94.05 This part is made up of: Brush with gasket, wand with switch, foam generator, and the handle. Goes on the end of the hose assembly and dispenses only one product.

31 PA/CCD-007 CCD/CSR WAND W/TOGGLE SWITCH $24.95 This is the brush housing that goes on the back of the gasket and covers the foam generator. The handle screws onto the threaded end. Housing is not sold without the toggle switch.

32 PA/CCD-008 BRUSH W/ GASKET $18.95 This is the bristles and rubber gasket that make up the brush for a CCD or CSR.

33 PA/CCD-011 BRUSH HOLDER FOR CCD/CSR $15.00 Bolts to the side of a CCD or CSR to hold the product brush.

34 PA/CCD-013 3/16 inside diam. SHAMPOO PUMP TUBE $12.50 A soft silicone tube that is approximately 9 long that goes through the shampoo pump in the CCD and CSR. It has a 3/16 internal diameter (larger than spot tube).

35 PA/CCD-014 CCD HOSE & BRUSH ASSY. COMPLETE $ The complete hose & brush starting at the cabinet on CCD units. It is also the same as the SAV-S hose & brush assembly.

36 CCD DOOR DECAL $19.95 This was used on the front of the first version of the stand alone carpet shampooer. It was made using the EVD cabinet and did not have the upper cabinet that houses the jerrican. This machine did not have a separate instruction plate. PA/CCD-016

37 PA/CCD-019 CCD/CSR DIVERTER VALVE $48.50 It takes air from the compressor and sends it to the hose assembly, to either make the shampoo foam or spray the fragrance. Also called an air diverter valve.

38 PA/CCD-020 HANDLE FOR BRUSH $7.95 This handle screws onto the wand. For all shampoo and/or spot units.

39 PA/CCD-022 FOAM GENERATOR FTNGS-CCD $2.85 These are mounted in the foam generator of the CCD. The long thin one is the for the product line and the larger is for the air line.

40 PA/CCD-032 Air line CCD TUBINGS W/ WIRE $16.25 The inner tubings and wires for the CCD machine hose assembly. Only sold in the set. Air line marked with blue.

41 PA-CCD-033 FOAM PILL FOR BRUSH $0.00 Goes in the foam generator, and product goes through it. Product will not foam without this.

42 PA-CCD-038 CCD PICK-UP TUBE $5.25 Consists of clear pick up tubing, pick up foot weight, and jug cap. The pick up foot goes into the product jug and the tube connects to the pump tube. The CCD had no jerrican so the longer tube is even longer for the CCD1 so it can reach the upper cabinet and no jug cap.

43 PA/CCD-039 SHAMPOO PUMP-CCD/CSR $94.00 A peristaltic pump used in a CCD and CSR. It moves the shampoo through the tube into the product lines.

44 PA/CCD-040 CCD CONTACTOR PLATE COMPLETE $30.45 This part goes inside the CCD machine and consists of one relay that turns on the shampoo and the other relay turns on the compressor.

45 PA/CCD-042 GASKET ONLY FOR BRUSH $4.39 Rubber gasket on the product brush. Goes between the bristles and the wand.

46 PA/CCD-043 FOAM GENERATOR FTNGS-CSR $3.50 These are mounted in the foam generator of the CSR. The long thin ones are for the product lines and the larger the air line.

47 PA/CCD-044 VINYL HOSE PROTECTOR $5.50 This an outer covering for the shampoo hose. It helps to protect the carpet from dirt on the outside of the hose and from the elements.

48 PA/CCD-046 ON-OFF LEGEND PLATE $0.00 This goes around the toggle switch on a brush to show the position of the switch.

49 PA/CCD-048 CSR HOSE & BRUSH ASSEMBLY $ This is the complete assembly starting from the tank on the CSR. It is different from the CCD because it dispenses Shampoo & Spot Remover.

50 PA/CCD V SHAMPOO PUMP $ This is the product pump for export units that contain shampoo.

51 PA/CCD-050 CSR WAND & BRUSH COMPLETE $94.05 This consists of the brush with gasket, the wand with switch, foam generator, and the handle. It goes on the end of the hose assembly and dispenses the product in the CSR. It is the same as the SVSR wand & brush.

52 PA/CCD-051 CSR FOAM GENERATOR $49.95 This goes in the brush of the CSR to dispense shampoo and spot remover. It contains the foam pill behind the screen. This is the same as the one for the SVSR and SVSR-P.

53 PA/CCD-052 CSR HOSE ASSEMBLY $74.95 It consists of the outer hose covering and the wiring and lines that make up the inside of the hose. It is used on the CSR and also in SVSR units.

54 PA/CCD /2gl. JERRICAN $60.00 A large plastic container that holds the shampoo in the upper cabinet of the CCD-1 and CSR. Early CCD models did not have upper cabinets and do not need a jerrican.

55 PA/CCD-054 CSR CONTACTOR PLATE COMPL. $41.00 This part goes in the stand alone Shampoo / Spot machine. It consists of three relays. One relay turns on the compressor, one turns on the shampoo, and one turns on the spot remover.

56 PA/CCD-055 CCD-1 DOOR DECAL $19.95 This is the front cabinet decal for the later version of the CCD machine. Notice it does not have instructions printed on it because it had a separate instruction plate.

57 PA/CCD-058 CSR DOOR DECAL $19.95 This the front cabinet decal on the CSR machine. It has a separate instruction plate.

58 PA/CCD-059 fitting 1/4 X 1/8 CCD FITTING $5.00 These are used to connect the poly tubing coming from the pump tube to the smaller line that goes through the hose assembly.

59 PA/CCD-060 CSR INSTRUCTION PLATE $33.75 This is the printed lexan plate for the upper window on the front of the CSR.

60 PA/CCD-061 1/8 inside diam. SPOT REMOVER PUMP TUBE $12.50 This is a soft silicone tube approximately 9 long that fits in the product pump for the spot remover on the CSR, SVSR, SAV-S, Quadra and the protectant on the SVSR-P. It has a smaller diameter on the inside than a shampoo pump tube (see inserted photo).

61 PA/CCD-062 Blue mark indicates the air line CSR TUBINGS W/WIRE $18.25 These are the inner tubings and wiring for the CSR hose assembly. These are not sold separately, only in this set. The air line is marked with blue ink because it has a thinner wall.

62 PA/CCD-063 CSR SELECTOR SWITCH $9.95 It selects between shampoo or spot remover on the front of the CSR.

63 PA/CCD-065 Red Rollers SPOT REMOVER PUMP $94.00 This the peristaltic pump on the CSR, SVSR, SVSR-P, SAV-S, and Quadra. It helps move the spot remover or spot removing shampoo (in the SVSR-P) through the tube and into the product lines of the hose.

64 PA/CCD-066 ROLLER & TUBE KIT-RED-SR $25.00 These go inside the Spot Remover pump on the CSR, SVSR, SVSR-P, SAV-S, and Quadra.

65 PA/CCD-067 ROLLER & TUBE KIT-BLACK SHP $25.00 These go inside the Shampoo pump on a CCD, CSR, SVSR, and SVSR-P.

66 PA/CCD-068 UPPER DOOR-CCD/CSR $85.00 This is the upper cabinet door on the stand alone carpet shampooer. It provides access to the jerrican and a van lock goes in the hole at the top.

67 PA/CCD-069 CCD/CSR CABINET DECAL $8.95 This decal goes on the back of the stand alone shampooer s upper cabinet and on the front around the lexan instruction plate.

68 PA/CHA-002 COMPRESSOR W/TAPE&KLIXON $ It blows the air into the air line in the hose assemblies on all of the stand alone machines (EVD,CCD,CSR). It is different than the VAC compressor.

69 PA/CHA-005 Fragrance inner tubing from the hose assembly connects here FRAGRANCE VALVE $48.95 These go on all fragrance dispensing machines. One per fragrance selection. It delivers the fragrance from the pick up tube to the fragrance line that goes into the hose assembly. In the EVD it is typically sent with the pick up tube attached.

70 PA/CHA-009 COMPRESSION FITTING $4.25 These are in the diverter valves and atomizers in the all fragrance units. These contain ferrules that connect from the product lines. The only part sold separately is the ferrules.

71 PA/CHA-010 FERRULES-SET OF 2 $2.00 This is a set consisting of a ferrule rear (fr) and a ferrule front (ff). These go on the ends of the product lines and inside the compression fittings.

72 PA/CHA-015 E-2 SELECTOR SWITCH $8.95 It goes on the door of the EVD-2 for switching between the two fragrance selections.

73 PA/CHA-016 EVD PICK UP TUBE ASSEMBLY $4.95 This contains the pick up foot that goes in the fragrance jug, the jug cap, and the pick up tubing that connects to the fragrance valve.

74 PA/CHA-018 PICK UP FOOT $1.25 Goes at the end of the pick up tube inside the product jug to prevent dirt or debris from getting into the tubes.

75 PA/CHA-020 TRANSFORMER-EVD/CCD/CSR $25.50 It converts voltage from 117v to 24v on the stand alone machines.

76 PA/CHA-021 CONTACTOR FOR EVD/CCD/CSR $18.95 These are on all the stand alone machines. There is one on the EVD that turns on the compressor. There are two on the CCD, one that turns on the compressor and one for the shampoo pump. There are three on the CSR, one for the compressor and two for the shampoo and spot remover pumps.

77 PA/CHA-024 EVD-3 SELECTOR SWITCH $9.95 This is the 3 position switch on the door of the EVD3 that selects from the fragrance choices.

78 PA/CHA-028 LED INDICATOR LIGHT $2.15 This is the power indicator light on the handy box inside the stand alone machines.

79 PA/CHA V COMPRESSOR $ This compressor is for export stand alone units. It blows the air into the air line in the hose assemblies on all of the stand alone machines (EVD,CCD,CSR).

80 PA/CHA V TRANSFORMER $32.89 It goes on the export stand alone machines. It converts the voltage from110v to 24v. The 240v have the orange wire and the other has a white wire.

81 PA/CHA-035 FM TIMER-EVD/CCD/CSR $85.00 The timer that controls the programming for the stand alone machines.

82 PA/DOR-004 VISUAL PUMP $12.95 This is the old style visual pump in any fragrance machine. There is one pump per visual cylinder. It comes with visual tubing and a needle valve to regulate the air. The new style visual has a single black pump. They can not be interchanged.

83 PA/DOR-006 VISUAL PUMP TUBES $1.00 The clear poly tubing cut to approx. 30 length depending on which fragrance machine they have. It goes from the old style visual pumps to the cylinders. It can be found at most home improvement stores.

84 PA/DOR-007 EVD-2 VISUAL FLUID-SET $9.95 The EVD2 stand alone machine had a visual display with only two cylinders. This is the visual fluid we send for a two column display.

85 PA/DOR-009 EVD/FV3 LEXAN FACE PLATE $21.60 The clear lexan (photographed with protective film on one side) in front of the visual display on the fragrance machines. It is approx. 6 x9. There are some older EVD machines that had a larger plate approx. 7 x 10.

86 PA/DOR-010 EVD PICTURE FRAME $37.25 The steel frame that goes around the Lexan face plate in front of the visual displays. There are two sizes, it is necessary for the customer to measure, and indicate size on the order.

87 PA/DOR-011 EVD DOOR DECAL $19.95 There is only one door decal for all of the EVD machines.

88 PA/DOR-017 SWITCHGUARD FOR DOOR $2.15 This goes around any switch on the door of the stand alone machine.

89 PA/DOR-017 SWITCHGUARD FOR DOOR $2.15 This goes around any switch on the door of the stand alone machine.

90 PA/DOR-018 EVD/CCD/CSR COIN MECH $44.95 This is a mechanical coin mech in the stand alone machines. It takes quarters only.

91 PA/DOR-020 COIN CATCHER-EVD/CCD/CSR $3.00 This goes on the coin mech of a stand alone machine to catch the coins that come out of the coin return.

92 PA/DOR-021 MICROSWITCH-COIN MECH. $9.95 It goes in the mechanical coin mech on the stand alone units and counts the coins.

93 PA/DOR-031 EVD-3 VISUAL FLUID-SET $13.50 The set of 3 fluids for the 3 column visual display in the EVD3. It is the same as the visual fluid set for the FV3 and SAV-F. Customers should not try to replace this with anything other than our visual fluid.

94 PA/DOR-040 VAN LOCK $22.61 These are the locks on the coin only combo units, there are three down the front door. There are two on the cabinet of the EVD and the CSR has two on the cabinet and one on the upper cabinet. Keys are sold separately.

95 PA/DOR-041 VAN KEY $6.86 This key fits the door locks on the coin only combo units and the stand alone machines. The code, shown on the side of the key, can be any from A to ZZ.

96 PA/SAV-022 QUADRA RELAY BOARD $ This is the electronic board for inside the Quadra. We do not replace individual components on the board, the entire board has to be replaced.

97 QUADRA DOOR DECAL $45.00 PA/SAV-024

98 QUADRA TANK DECALS (2) $45.00 PA/SAV-025

99 PA/SAV-026 SAV RELAY BOARD $ This is the electronic board that goes inside the tank of the new SAV. It has to be replaced as a whole, we will not sell individual components.

100 PA/SAV-028 GREEN INDICATOR LIGHT-SAV $8.95 This is the Super Vac indicator light on the door of the electronic SAV.

101 PA/SAV-029 RED INDICATOR LIGHT-SAV $8.95 This is the Turbo Vac indicator light on the door of the electronic SAV.

102 PA/SAV-032 SAV TANK DECALS (2) $45.00 These are used on the electronic SAV (with Smart Card).

103 SAV PRICE DECAL SHEET $4.95 PA/SAV-033

104 QUADRA PRICE DECAL SHEET $4.95 PA/SAV-034

105 PA/SAV-035 QUADRA INSTRUCTION PLATE $33.75 This is the printed instruction plate on the door of the Quadra.

106 PA/SAV-036 SAV INSTRUCTION PLATE-TWO WINDOW $33.75 It goes in the door of an electronic SAV in front of the display timer. It is called a two window because of the additional space for the bar graph service indicator.

107 QUADRA-D1 DOOR DECAL $45.00 PA/SAV-037

108 PA/SAV-043 Notice that this relay has red writing and VAC-169 relay has black. SS12 5v DC RELAY $44.95 Has the same function as VAC-169 (AC) of turning the motors on and off, but it goes in the electronic combo units. Ask the customer what kind of unit they have to determine whether they need AC or DC.

109 PA/SAV-045 SAV-S HOSE & BRUSH ASSEMBLY $ This the complete Spot remover hose and brush on the SAV-S. It is the same as the CCD hose and brush assembly, because it has only one product.

110 PA/SAV-046 SAV-S HOSE ASSEMBLY ONLY $69.95 This hose consists of: outer tubing, internal product and air line, and wiring. It is used on SAV-S units and is the same as the one used in the CCD machines..

111 PA/SAV-047 Air line SAV-S TUBINGS W/WIRE $16.25 The inner tubings and wires for the SAV-S machine hose assembly. Only sold in the set. Air line marked with blue.

112 PA/SAV-048 SAV-S HOSE BARB SET (2) $2.85 A set of barbs that fit in the white block (foam generator) in the brush of an SAV-S. The small o gaskets go between the generator exterior and the barb to make the seal air tight. The one with larger end is for product and the smaller one is for air. These are what connects to the lines coming from the product hose.

113 PA/SAV-049 SAV-S FOAM GENERATOR $49.95 This is the same as the CCD foam generator. It goes in the brush of the SAV-S and creates the foam. Behind the screen, inside, is the foam pill.

114 PA/SAV-051 SAV-F DOME DECAL $30.00 Set of 4 decals for the front, back and two sides of the SAV-F dome.

115 PA/SAV-052 SAV-F DOOR DECAL $35.00 Door decal for the coin only SAV-F.

116 PA/SAV-053 SAV-F-D1 DOOR DECAL $35.00 Door decal for the SAV-F that accepts dollar bills.

117 PA/SAV-054 SAV-F TANK DECAL $45.00 Set of 2 decals, one for each side of the SAV-F tank.

118 PA/SAV-055 SAV-S DOME DECAL $30.00 Set of 4 decals for the front, back and the two sides of the SAV-S.

119 PA/SAV-056 SAV-S DOOR DECAL $35.00 Door decal for the coin only SAV-S.

120 PA/SAV-057 SAV-S-D1 DOOR DECAL $35.00 Door decal for the SAV-S that accepts dollar bills.

121 PA/SAV-058 SAV-S TANK DECAL $45.00 Set of 2 decals for the two sides of the SAV-S tank.

122 PA/SAV-059 SAV-S TIMER/CONTROLLER $ This scrolls the message and displays the bar graph in the SAV-S, the Quadra and electronic SVSR units. It has to have a smart card to program it. These replaced the IDX Large LED Timer in the new electronic units.

123 PA/SAV-060 SAV-S RELAY BOARD $ Each electronic combo unit has a different relay board. It contains relays for turning on the compressors and pumps.

124 PA/SAV-061 SAV-S/SVSR SELECTOR SWITCHES-NS $14.95 This is the switch on the door that changes from super and turbo vacuum to Spot Remover in the SAV-S or from vacuum to Shampoo or Spot Remover in the new electronic SVSR.

125 PA/SAV-062 SAV-F TIMER/CONTROLLER $ This scrolls the message in the SAV-F and electronic FV3 units that have a visual display. It has to have a smart card to program it. These replaced the IDX small LED Timer in the new electronic units.

126 PA/SAV-063 SAV TIMER/CONTROLLER $ This scrolls the message and displays the bar graph in the SAV. It has to have a smart card to program it. These replaced the IDX Large LED Timer in the new electronic units.

127 PA/SAV-064 SAV-F PRICE DECAL SHEET $4.95