AUTEAU SHOWER FITTINGS

Transcription

1 AUTEAU SHOWER FITTINGS Stylish and efficient showerheads to complement Auteau timeflow shower controls Reliance Water Controls Ltd A Reliance Worldwide Company Worcester Road, Evesham, Worcestershire, WR11 4RA, UK UK - Freephone: Freefax: Outside UK - Tel: +44 (0) Fax: +44 (0) The Safety Valve Specialist sales@rwc.co.uk

2 In today s commercial environments, it is increasingly important that manufacturers are able to supply a wide range of shower fittings to suit the many different applications and designs that are found in these areas. A major consideration in the choice of the type of showerhead will be maintenance, or to be more specific the avoidance of a high maintenance requirement. As the showerhead is downstream of the mixer, all the water that is passed through it will be at ideal temperatures for legionella growth; therefore the design should be of a type which prevents scale formation or has some form of self-cleaning mechanism since accumulated debris allows bacteria to gather and breed. The Auteau Vortex range of showerheads fulfils all of these criteria due to its patented conical design and large flow paths. For applications where pressures or flow rates are insufficient to use the vortex system or scale and bacteria growth are controlled by some other means and a more traditional spray pattern is desired the Auteau range of shower fittings also features standard removable grid type spray heads. Vortex Spray System The anti-scale and anti-legionella properties of the vortex system are due to its design: it does not allow scale build-up and the head will drain fully once the water stops flowing. These two qualities are key to preventing scale and bacterial build-up. The showerhead nozzle is conical in its design and, as the illustration shows, the ports for the incoming water are machined in such a way that the water is channelled horizontally around a central cone. This creates the spinning action or vortex within the nozzle. As the vortex reaches the outer rim of the nozzle, centrifugal force sends it spraying out in a typical shower spray pattern as invigorating mini droplets rather than a needle-like stream of water. Scale does not affect the vortex system because the holes that water is channelled through are much larger than in a traditional spray head plus no water is left in the head after running. Instead of relying on the water passing through tiny holes that can easily and quickly block up, this system uses a swirling action that is not susceptible to such a problem. We can confidently claim this shower system to be anti-scale thereby helping to prevent legionella because one of the bacteria s favourite breeding grounds is among the rich nutrients of a scaled up showerhead. 2

3 Product Range Auteau Tonic Jet Range Description The Auteau Tonic-Jet range of showerheads includes exposed riser sets, concealed heads for solid wall, panel mounted or through-wall applications, as well as top entry and ceiling mounted showerheads. The Auteau Tonic-Jet concealed and through-wall showerheads consist of an anti-vandal solid brass showerhead in either vortex spray pattern or a standard grid type spray pattern. The heads are standard ½" MBSP connections and the through-wall version also comes with a 60mm backplate and backnut to tighten onto panels or walls. The heads are designed to be used in conjunction with the Auteau concealed shower controls (SELF , SELF and SELF ). The Auteau Tonic-Jet exposed riser set consists of an anti-vandal solid brass showerhead in either vortex spray pattern or a standard grid type spray pattern, a two piece chrome plated riser, riser connector, fixing clamp and all the necessary parts and fixings to connect to the Auteau exposed shower control (SELF or SELF ). The showerheads are also fitted with an integral 8lpm flow regulator so that water economy is assured. Auteau Traditional Spray Range Description There are 2 types of exposed riser sets in this range: The 'Contract' type has a low profile triangular showerhead, solid brass construction and wall hugging riser pipe, ready to connect to the Auteau exposed shower controls (SELF and SELF ). The Auteau traditional exposed riser set consists of a solid brass scale resistant showerhead, a chrome plated 15mm riser tube, backplate and arm, and fixings ready to connect to the Auteau exposed shower control (SELF or SELF ). The concealed version uses the same showerhead with a solid brass shower arm with ½" MBSP connections and can be used in conjunction with the Auteau concealed shower control (SELF , SELF and SELF ). The Auteau traditional showerhead range can be used at pressures as low as 0.3 of a bar. Both systems feature a user adjustable direction of spray. In addition to the vortex and traditional style showerheads, Reliance also offer a high security anti-vandal/anti-ligature showerhead. The showerhead is designed to present no ligature points nor any possible leverage points for a potential vandal to grip on to. The anti-rotation ring locates into a hole at the back of the showerhead. This not only assists installation, but means that the showerhead cannot be moved or rotated by anyone in the shower room. An anti-vandal nut and washer are also provided for locking the showerhead in position from the void behind. The anti-vandal nut is a brass nut with three screws in, so that after the nut is tightened the screws can also be tightened to prevent any accidental loosening of the nut over time. A flow regulator is provided and is clipped into the inlet of the showerhead, which is inside the void. The flow regulator is set to provide a flow of 8 litres per minute. The connection can be 15mm compression, a female BSP connector or a standard tap swivel connector. 3

4 Product Range Tonic-Jet Vortex Style Showerheads RSET Exposed Riser Kit HEAD Concealed Showerhead HEAD Concealed Through-Wall Showerhead HEAD Top Entry Showerhead HEAD Ceiling Mounted Showerhead Tonic-Jet Grid Type Showerheads RSET Exposed Riser Kit RSET Contract Exposed Riser Kit HEAD Concealed Showerhead HEAD Concealed Through-Wall Showerhead HEAD Top Entry Showerhead HEAD Ceiling Mounted Showerhead Traditional Showerheads HEAD Exposed Riser Kit HEAD Concealed Showerhead and Arm Anti-Ligature Showerheads SENS Concealed Through-Wall Showerhead SENS Concealed Panel Mount Showerhead Specifications Maximum working pressure Minimum working pressure, vortex Minimum working pressure, grid type spray 6 bar 1 bar 0.3 bar Maximum working temperature 90 C Minimum working temperature 2 C Materials Body O rings Standard brass Nitrile Maintenance No abrasive cleaners or strong chemicals should be used to clean the chrome or painted surfaces of these controls. Use a soft cloth and a mild detergent only. 4

5 RSET AUTEAU TONIC-JET EXPOSED RISER SET - VORTEX SPRAY RSET AUTEAU TONIC-JET EXPOSED RISER SET - GRID TYPE SPRAY A high quality exposed riser set which can be used in conjunction with the SELF , SELF and MIXS shower controls. The showerhead is all brass construction, chrome plated to a high standard for long life and comes with an 8 lpm integral flow regulator. Two types of spray pattern are offered, the vortex system and the grid type spray. The vortex spray head is a unique design which uses a swirling action within the head to create a spray pattern, this gives the advantage of not having any small holes to be blocked up by scale, making it scale proof. In addition because no residual water is left in the head to provide a breeding ground for bacteria problems like legionella growth are eliminated. The vortex system is suitable for use in systems with a minimum of 1 bar pressure, below that the grid type spray system should be used. The grid type spray features a removable insert which is interchangeable with the vortex nozzle for retrofit purposes and can be dismantled for cleaning when required, this can be used at pressures as low as 0.3 bar. In both cases the riser set is supplied complete with a 2 piece riser tube, riser connector, machined brass and chrome plated riser bracket, shower connection nut, shower head mounting kit, and the shower head. 2100mm 650mm 800mm (GRID) (VORTEX) A B C D E F G H J Ø16 Ø42 38 Reliance Part Number: RSET or RSET as applicable: Auteau Tonic-Jet exposed riser set, complete with antivandal showerhead, two piece chrome plated riser, riser connector, riser clamp and screws, and connections for the exposed shower control. The showerhead must be anti-vandal and anti-scale and incorporate an integral 8lpm flow regulator. 5

6 RISE AUTEAU CONTRACT RISER SET A contract exposed riser which can be used in conjunction with the SELF and SELF shower controls. The low profile anti ligature showerhead is all brass construction, chrome plated to a high standard for long life. The spray grid is removable for cleaning when required, this can be used at pressures as low as 0.3 bar. The riser set is supplied complete with a 2 piece riser tube, riser connector, a chrome plated riser clip, shower connection nut, shower head mounting kit, and the shower head. 2100mm 650mm A B C D E F G H Ø14 ½" Reliance Part Number: RISE Auteau Contract Riser Set, low profile anti-vandal and anti-ligature triangular showerhead and riser set. 6

7 HEAD AUTEAU TONIC-JET SHOWERHEAD, CONCEALED PIPEWORK, VORTEX SPRAY HEAD AUTEAU TONIC-JET SHOWERHEAD, CONCEALED PIPEWORK, GRID TYPE SPRAY HEAD AUTEAU TONIC-JET SHOWERHEAD, 1-150mm THROUGH-WALL, VORTEX SPRAY HEAD AUTEAU TONIC-JET SHOWERHEAD, 1-150mm THROUGH-WALL, GRID TYPE SPRAY A high quality showerhead for solid and through wall applications which can be used in conjunction with the SELF , SELF , SELF and MIXS shower controls. The showerhead is all brass construction, chrome plated to a high standard for long life and comes with an 8 lpm integral flow regulator. Two types of spray pattern are offered, the vortex system and the grid type spray. The vortex spray head is a unique design which uses a swirling action within the head to create a spray pattern, this gives the advantage of not having any small holes to be blocked up by scale, making it scale proof. In addition because no residual water is left in the head to provide a breeding ground for bacteria problems like legionella growth are eliminated. The vortex system is suitable for use in systems with a minimum of 1 bar pressure, below that the grid type spray system should be used. The grid type spray features a removable insert which is interchangeable with the vortex nozzle for retrofit purposes and can be dismantled for cleaning when required, this can be used at pressures as low as 0.3 bar. Both the solid wall and the through wall versions come complete with anti rotation locating pins, backnuts and washers where applicable and the shower head. 2100mm A E B 650 (GRID) C F 800 (VORTEX) D A E G B C F D Model A B C D E F G Concealed M½" N/A Through-wall max M½" 18 Reliance Part Number: HEAD 100 (choose option as applicable) Auteau Tonic-Jet concealed showerhead for solid or through-wall applications 1-150mm, complete with anti-vandal showerhead, ½" MBSP connections and locating anti-twist Allen screw. The showerhead must be anti-vandal and anti-scale and incorporate an integral 8lpm flow regulator. 7

8 HEAD AUTEAU TONIC-JET TOP ENTRY SHOWERHEAD - VORTEX HEAD AUTEAU TONIC-JET TOP ENTRY SHOWERHEAD - GRID TYPE SPRAY A high quality showerhead for wall mounted applications where the water supply is from above and the flow of water is controlled by a master valve or an infra red sensor linked to a solenoid valve. The showerhead is all brass construction, chrome plated to a high standard for long life and comes with an 8 lpm integral flow regulator. Two types of spray pattern are offered, the vortex system and the grid type spray. The vortex spray head is a unique design which uses a swirling action within the head to create a spray pattern, this gives the advantage of not having any small holes to be blocked up by scale, making it scale proof. In addition because no residual water is left in the head to provide a breeding ground for bacteria problems like legionella growth are eliminated. The vortex system is suitable for use in systems with a minimum of 1 bar pressure, below that the grid type spray system should be used. The grid type spray features a removable insert which is interchangeable with the vortex nozzle for retrofit purposes and can be dismantled for cleaning when required, this can be used at pressures as low as 0.3 bar. Both the versions come with a 15mm compression connection and a wall mounting kit. 2100mm A B C D (GRID) (VORTEX) Reliance Part Number: HEAD 100 (choose option as applicable) Auteau Tonic-Jet exposed top entry showerhead, complete with anti-vandal showerhead and 15mm compression connections. The showerhead must be anti-vandal and anti-scale and incorporate an integral 8lpm flow regulator. 8

9 HEAD AUTEAU CEILING MOUNTED SHOWERHEAD - VORTEX HEAD AUTEAU CEILING MOUNTED SHOWERHEAD - GRID TYPE SPRAY A high quality showerhead for ceiling mounted applications where the water supply is from above and the flow of water is controlled by a master valve or an infra red sensor linked to a solenoid valve. The showerhead is all brass construction, chrome plated to a high standard for long life and comes with an 8 lpm integral flow regulator. Two types of spray pattern are offered, the vortex system and the grid type spray. The vortex spray head is a unique design which uses a swirling action within the head to create a spray pattern, this gives the advantage of not having any small holes to be blocked up by scale, making it scale proof. In addition because no residual water is left in the head to provide a breeding ground for bacteria problems like legionella growth are eliminated. The vortex system is suitable for use in systems with a minimum of 1 bar pressure, below that the grid type spray system should be used. The grid type spray features a removable insert which is interchangeable with the vortex nozzle for retrofit purposes and can be dismantled for cleaning when required, this can be used at pressures as low as 0.3 bar. 3000mm A B C D VORTEX GRID mm 900mm (GRID) (VORTEX) Reliance Part Number: HEAD 100 (choose option as applicable) Auteau Tonic-Jet ceiling mounted showerhead complete with anti-vandal showerhead, ½" FBSP connections. The showerhead must be anti-vandal and anti-scale and incorporate an integral 8lpm flow regulator. 9

10 HEAD AUTEAU TRADITIONAL CONCEALED HEAD AND ARM KIT HEAD AUTEAU TRADITIONAL RISER KIT A range of traditional style showerheads for exposed and concealed applications. The showerheads are suitable for use with pressures as low as 0.3 bar and the direction of the spray is adjustable, both versions incorporate a manual descaling function by means of a lever which is pulled out and turned to release built up scale deposits. The exposed riser set comes complete with shower arm, riser tube, and shower head and is suitable for use with the SELF and SELF exposed shower controls. The concealed version comes with a shower arm and shower head and is suitable for use with the SELF concealed shower control. 2100mm 650mm A B C D Riser version mm Concealed version M½" Reliance Part Number: HEAD 100 (choose option as applicable) Auteau Traditional style riser set or concealed showerhead and arm complete with manual descaling function, ½" MBSP or 15mm connections. 10

11 SENS THROUGH-WALL ANTI-LIGATURE SHOWERHEAD, 1-150mm SENS PANEL MOUNT ANTI-LIGATURE SHOWERHEAD, 1-50mm A high quality, chrome plated low profile anti-ligature showerhead for concealed through wall and panel mounting applications. The showerhead has been specifically designed for high security applications to prevent vandalism. The showerhead comes with an 8 lpm flow regulator, an anti rotation plate, a backplate and backnut with locking screws and a removable plastic spray grid held in position with a security screw. A B C D Through-wall version ½" Panel Mount version ½" Reliance Part Number: SENS or SENS : Through-wall or panel mount anti-ligature showerhead with low profile rounded design and integral removable spray grid and 8lpm flow regulator. 11

12 AUTEAU SHOWER FITTINGS Reliance Water Controls Ltd A Reliance Worldwide Company Worcester Road, Evesham, Worcestershire, WR11 4RA, UK UK - Freephone: Freefax: Outside UK - Tel: +44 (0) Fax: +44 (0) sales@rwc.co.uk Reliance has prepared the content of this document carefully but disclaims all warranties, express or implied, as to the accuracy of the information contained herein. Reliance reserves the right to make changes to the product and the information contained in this document at any time. AUTO2TL /07 Reliance Water Controls Ltd 2007 The Safety Valve Specialist