The Home of Control & Automation in Ireland. Flomate

Transcription

1 The Home of Control & Automation in Ireland Flomate

2 Flomate mains boost pumps offer a simple, patented solution to the problem of low or intermittent mains water pressure without the need for a cold water break tank. They are designed to be connected directly to the incoming mains. Flomate mains boost pumps are WRAS approved and fully compliant with UK water regulations. Designed to be compact and simple to install, Flomate pumps can be installed discreetly within a standard kitchen cupboard unit. Flomate are easy to install with no on-site commissioning required. Features and benefits Performance bar pressure Output flow rate litres/minute Built-in bypass Quiet operation Automatic switching Dry run protection Continuously rated Quality UK water regulations compliant WRAS approved ISO 9001:2008 BS compliant CE compliant Reliability 3 year guarantee Robust brass construction Long life mechanical seal Service kit available From 50dB(A) Quiet Operation Water research advisory service approved for use on potable water systems Manufactured using procedures approved by BS EN ISO 9001: 2008 BS EN Product conforms to electrical household appliances standards BS EN CE compliant product 3year guarantee PATENT APPROVED GB A Flomate mains boost pumps are supplied with anti-vibration feet and pre-wired for ease of installation. The high quality brass construction of the Flomate range has been designed to provide performance, quality and reliability on demand. Peripheral Design Pressure efficient Compact size Automatic Switching Flow Switch automatically starts the pump when flow exceeds 0.6 litres/min 38

3 Performance on demand FLOMATE Built-in Bypass If mains water pressure exceeds 1.5 bar, system output is not restricted. Flow Restrictor Integrated flow restrictor ensures compliance with UK water regulation Mechanical Seal Carbon/Ceramic seal Long life Threaded connections High quality threaded connections to the cold water rising main 39

4 The solution to low mains water pressure Full technical data sheets are available to download Applications for Flomate 40

5 Performance on demand Eliminate low mains water pressure problems with flomate Stuart Turner s range of flomate mains boost pumps provide the solution to the increasingly common problem of low mains water pressure. Boosting water performance without a break tank In many homes, the traditional domestic system using a hot water immersion heater and central heating boiler fed by a cold water tank has been replaced by instantaneous water heating systems such as a combi-boiler. This system type cannot offer water pressure generated by the height of the traditional loft installed cold water tank and as a result can suffer from problems with low water pressure at taps, electric showers and other water using appliances. Flomate provides a simple, cost effective and patented solution to boost low or intermittent mains water pressure. Pumping water directly from the mains supply Flomate uses an extremely reliable flow regulator to ensure flow does not exceed the 12 litre per minute UK water regulation limits. However, if mains water pressure increases at times of low water demand and exceeds the minimum guaranteed by the water supplier, Flomate s patented bypass feature ensures that the resulting increase in water flow will bypass the pump head and be supplied to the property without being restricted. A range of solutions for a range of properties Flomate will boost incoming mains water pressure by an additional 1.5 bar at 12 litres per minute. It's compact design allows it to sit discreetly under the kitichen sink making it ideal for properties where space is limited. However, in larger properties with higher occupancy the demand for water may exceed the 12 litre per minute limit supplied by the standard Flomate solution. Flomate mains boost extra combines all the features of the standard Flomate pump but supplements this with additional water storage provided by a pressure vessel. By supplementing the water pressure boosting performance of the Flomate pump with the supply from the pressurised water cylinder, Flomate extra offers the householder the ability to store water at pressure to meet peak demand. Flomate mains boost extra offer solutions for a range of property sizes and are available with water storage pressure vessels ranging in size from 60 litres to 300 litres. Smaller capacity Flomate mains boost extra systems will sit neatly within a standard 500mm kitchen base unit and are suitable for properties with more than one bathroom. They will deliver up to 16 litres per minute at up to 3 bar pressure to multiple outlets within a property. Larger capacity systems can be installed within a 600mm larder style kitchen unit and are suitable for larger properties with multiple bathrooms or en-suites. These Flomate units will deliver up to an impressive 30 litres per minute. FLOMATE Applications for Flomate extra For further advice on selecting the correct pump call: HELPLINE +44 (0)

6 Flomate Mains Boost Suitable for low occupancy properties with typically one bathroom. Flomate Mains Boost Pump is designed to be connected directly to the incoming mains and will deliver an additional 1.5 bar pressure to the existing mains pressure and a maximum flow rate of 12 litres per minute. The pump will start automatically when a flow rate of 0.6 litres per minute or more exists. 3year guarantee Part No Model Mains Boost Mains Boost 3.0 HEAD (metres) HEAD (bar) Water Companies minimum pressure in the mains supply - Seven metres static head (0.7 bar) FLOW (l/min) Full technical data sheets are available to download Applications for Flomate 42

7 Performance on demand Flomate Mains Boost Extra Designed for higher occupancy properties with typically up to two bathrooms and to fit neatly within a standard 500mm kitchen base unit. Flomate Mains Boost Extra can be connected directly to the incoming mains and will deliver up to 16 litres/minute flow at 3.0 bar pressure to multiple outlets within the property, up to the preset cut-in limit of the 60 or 80 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges. Flomate Mains Boost Extra Flomate Mains Boost Extra is suitable for larger properties with multiple bathrooms and outlets. Designed to sit within a typical kitchen 600mm larder style cupboard it will deliver up to 30 litres/minute flow at 3.0 bar pressure, dependant on the chosen pressure vessel variant, to multiple outlets within the property, up to the preset cut-in limit at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges. 3year guarantee 3year guarantee WRAS COMPLIANT WRAS COMPLIANT Part No Model Mains Boost Extra Mains Boost Extra 80 Part No Model Mains Boost Extra Mains Boost Extra Mains Boost Extra 300 DESCRIPTION 12 TYPICAL RUN TIME IN MINUTES DESCRIPTION 12 TYPICAL RUN TIME IN MINUTES Flomate Constant Flomate Extra 60 Constant Flomate Extra 80 Constant Flomate Constant Flomate Extra 100 Constant Flomate Extra 200 Constant FLOMATE Flomate Extra 300 Constant Applications for Flomate extra For further advice on selecting the correct pump call: HELPLINE +44 (0)

8 The following diagrams show where flomate pump types would be typically located within a property. Flomate mains boost pump under a typical kitchen sink Pressurised supply to outlets Within a tall 600mm standard kitchen unit of a larger property with higher ccupancy. Typical application: Flomate Mains Boost Extra 100, 200 or 300 Flomate pump Mains water stop cock Incoming cold water mains Under the kitchen sink of a small property Typical application: Flomate Standard 500mm kitchen base unit of a mid sized property with typically two bathrooms Typical application: Flomate Mains Boost Extra 60 Standard 500mm kitchen base unit of a mid sized property with typically two bathrooms Typical application: Flomate Mains Boost Extra 80 Full technical data sheets are available to download Applications for Flomate Full technical data sheets are available to download 44

9 Performance on demand Why do you need a flomate mains boost pump? Finding solutions to the problem of low mains water pressure is easy with the flomate range of mains boost pumps. A flomate or flomate extra pump will provide a consistent flow of water and increased water pressure to a property, boosting multiple outlets at once such as kitchen taps, baths or showers. Low water pressure? flomate will deliver an additional 1.5 bar pressure whilst limiting the water drawn from the mains to a maximum 12 litres per minute. The boost to water pressure and flow created by this compact pump is suitable for smaller properties where space is limited. flomate mains boost extra, is designed for larger occupancy properties and combines all the features of the flomate pump. It can still be installed directly in line with the cold water mains supply but provides additional water storage with a 60, 80, 100, 200 or 300 litre pressure vessel. All flomate mains boost extra units will deliver an extra flow of water for a defined period and will then continue to deliver 12 litres per minute until water demand ends and the pressure vessel recharges. DESCRIPTION TYPICAL RUN TIME IN MINUTES Flomate Constant Flomate Extra 60 Constant Flomate Extra 80 Constant Flomate Extra 100 Constant Flomate Extra 200 Constant Flomate Extra 300 Constant Please note, this is a general guide only and individual site conditions will vary. For further advice or technical assistance please contact our PumpAssist team. DESCRIPTION Flomate Flomate Extra 60 Flomate Extra 80 Flomate Extra 100 Flomate Extra 200 Flomate Extra 300 House - 1 bathroom l l l House - 1 bathroom + cloakroom House - 1 bathroom + 1 ensuite l l l l l FLOMATE House - 1 bathroom + 2 ensuites House - 2 bathrooms + 2 ensuites l l l Supply direct to a Combination Boiler l l l l l l Applications for Flomate extra For further advice on selecting the correct pump call: Full technical data sheets are available to download HELPLINE +44 (0)

10 As Irelands official distributor for Grohe, Modern Plant stock-hold and display a large range of Grohe Commercial and Domestic products including, showers, taps, frames and accessories. Modern Plant Ltd are an official stocking distribution centre for Emerson Rosemount industrial flow, level, pressure, analytical and temperature instrumentation products. Modern Plant Ltd offer a wide range of Stiebel Eltron products, from instantaneous hot water heating, stored water and electric space heating solutions. We are one of Ireland leading suppliers of Stuart Turner pumps to suit a variety of water boosting and water transfer applications across multiple market sectors. Modern Plant Ltd are official stocking distributors for the full range of SMC products and have a wide range of parts available from our trade counter. Modern Plant Ltd is the sole Irish distributors for the complete Medem gas safety product range. Both companies work closely to ensure the products remain best in class. We stock a comprehensive range of Haws AG emergency equipment. We also supply special models to the highest level of quality as well as attractive, stylish drinking fountains and water coolers. We are official Irish distributor for all Metso Automation valve and control products, including NELES branded flanged ball valves, rotary plug valves, segment valves, high performance off-set butterfly valves, valve actuators and much more. We stock a large range of Bobrick washroom accessories made from type304 stainless steel... the material of choice and quality for public washrooms. We stock tapware and shower solutions for commercial changing facilities, toilets and accessibility to people with reduced mobility in collective facilities. High tech solutions for healthcare, elderly care and laboratories. AMG specialise in quarter turn rack and pinion pneumatic actuators with many available from stock held locally in Modern Plant. We stock Bonfiglioli power transmission and control products, providing automation solutions for all areas of industry including the packaging, beverage, textile, food, ceramic, wood, mining and metal processing industries. For more information call Modern Plant Limited, Otter House, Naas Road, Clondalkin, D 22 E: modernplant.ie, W: