PSC CLEANING SYSTEMS INC. PRODUCT OVERVIEW

Transcription

1 PSC CLEANING SYSTEMS INC. PRODUCT OVERVIEW ELECTRIC DRIVEN, COLD WATER Page 2 PRESSURE WASHING & PUMPING SYSTEMS Available Specifications: 1000 psig to 7250 psig / 2 gpm to 200 gpm ELECTRICALLY HEATED, HOT WATER Page 3-4 PRESSURE WASHING SYSTEMS Available Specifications: 1000 psig to 5000 psig / 2 gpm to 16 gpm EXPLOSION-PROOF, HOT & COLD WATER Page 5-8 PRESSURE WASHING SYSTEMS - Class 1, Division 1, Groups C & D Available Specifications: Cold Water-1000 psig to 7250 psig / 2.2 gpm to 65 gpm Hot Water-1000 psig to 5000 psig / 2 gpm to 16 gpm VFD (VARIABLE FREQUENCY DRIVE), Page 9-11 MULTI-STAGE, AND TANK-FED PRESSURE WASHING & PUMPING SYSTEMS Available Specifications: 1000 psig to 5000 psig / 8 gpm to 100+ gpm NATURAL GAS & PROPANE FIRED HOT WATER Page 12 PRESSURE WASHING SYSTEMS Available Specifications: G30/P30 Series-1000 psig to 3000 psig / 4 gpm to 6 gpm 300,000 BTUH INPUT (2)G40/(2)P40 Series-1000 psig to 3000 psig / 4 gpm to 16 gpm 395,000 & 790,000 BTUH INPUT ENGINEERED PUMPING & PRESSURE Page WASHING SYSTEMS Available Specifications: Designed/built to application requirements ASME B31.1, 2004 & N285.0 Class 6 code compliant designs Certified safety, limit and performance testing and validation MTC (material traceability certificate) Level II COMMON FACTORY ADDED OPTIONS Page 15 PSC also stocks a complete assortment of after-market parts & accessories. Please consult our factory Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com

2 STATIONARY COLD WATER HIGH-PRESSURE CLEANING SYSTEMS ES420EAS 4 gpm at 1900 psig with optional Cat piston pump ES950ES 9 gpm at 5000 psig with optional Cat plunger pump and structural steel mounting base ES210EA 2.1 gpm at 1000 psig STANDARD EQUIPMENT: Belt-driven General ceramic plunger pump with adjustable pressure regulator, pilot-activated flow switch and thermal protection shutdown Powder coat painted heavy-gauge carbon steel base with pump cover and rubber isolation mounts Powder coat painted heater wraps and pump covers NEMA 12 control box with NEMA 4X MANUAL/OFF/AUTO selector switch, motor starter/overload relay, control circuit transformer (primary to 24 VAC), Dual or single lance/gun(s) with 50 ft. high-pressure wash hose(s) and low-pressure (downstream) or high-pressure (upstream) chemical injection ALL EA-SERIES MODELS FEATURE TRIGGER GUN ACTIVATED AUTO START/STOP CONTROL SYSTEM WITH SOLID-STATE TIME DELAY SHUTDOWN MODEL Flow Pressure Motor Voltage Total Amps Dimensions GPM PSIG H.P. ~1 PHASE ~3 PHASE ~1 PHASE ~3 PHASE L x W x H ES210EA /12/14 ES315EA /12/14 ES411EA /575/ /3/4.4 30/20/16 ES420EA /575/ /5/6.6 30/20/16 ES429EA /575/ /7.5/9.8 30/20/16 ES440EA /575/ /10/ /20/16 ES543EA /575/ /10/ /20/16 ES562EA /575/ /7.5/9.8 30/20/16 ES612EA /575/ /5/6.6 30/20/16 ES620EA /575/ /7.5/9.8 30/20/16 ES812EA* /575/ /7.5/9.8 30/20/16 ES820EA* /575/ /10/ /20/16 ES830EA* /575/ /14.5/ /28/19 * includes upstream chemical injection, 2 single lance gun assemblies and 2 high-pressure wash hoses for multi-gun operation. COMMON FACTORY ADDED OPTIONS: 3SS #316 stainless steel pump cover 3ELV-SS #316 stainless steel louvered pump end covers SRA surge relief assembly for feed water supply line LWPP low inlet water pressure protection with illuminated reset button ETM large-faced elapsed time meter analog SA nitrogen charged pump pulsation surge arrestor CLS remote cleaning station assembly c/w ½ high-pressure ball valve and quick connect CS-1 remote chemical injection station c/w ½ high-pressure control valve and chemical injector CS1-SSB remote chemical injection station (as above) housed in lockable stainless steel panel box 3300 Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com

3 ELECTRICALLY HEATED HIGH-PRESSURE CLEANING SYSTEMS ES429K448A psi ES830K2472AS psi with optional SRA surge relief assembly ES543K472AS psi with optional stainless steel wrap, cart and dual chemical system ES420K448AS psi with optional stainless steel wrap and heavy-duty lifting skid MODEL Flow GPM Pressure PSIG Heater Input Motor H.P. Total 208V Amps 480V -3 Phase 575V Dimensions L x W x H ES411K424A kw /24/52 ES411K448A kw /24/52 ES420K424A kw /24/52 ES420K448A kw /24/52 ES420K472A kw /24/52 ES429K424A kw /24/52 ES429K448A kw /24/52 ES429K472A kw /24/52 ES440K448A kw /24/52 ES440K472A kw /24/52 ES450K448A kw /28/55 (1) ES450K472A kw /28/55 (1) ES550K448A kw /28/55 (1) ES550K472A kw /28/55 (1) ES543K448A kw /24/52 ES543K472A kw /24/52 ES562K448A kw /24/52 ES562K472A kw /24/52 ES612K448A kw /24/52 ES620K448A kw /24/52 ES620K472A kw /24/52 ES812K2448A* kw /48/40 ES812K2472A* kw /48/40 ES820K2448A* kw /48/40 ES820K2472A* kw /48/40 ES830K2448A* kw /48/40 ES830K2472A* kw /48/40 ES1030K2472A* kw /48/40 ES1030K2496A* kw /48/40 ES1030K24115A* kw /48/40 * includes dual heat exchanger coils, upstream chemical injection and 2 single lance gun assemblies/2 high-pressure wash hoses for multi-gun operation. (1) pumping system top-mounted on heat exchanger (32 x 24 footprint) STANDARD EQUIPMENT: Belt-driven General ceramic plunger pump with adjustable pressure regulator, pilot-activated flow switch, liquid-filled pressure gauge and thermal protection (automatic shutdown) Powder coat painted heavy-gauge carbon steel base and frame assemblies Powder coat painted heater wraps and pump covers Automatic heat exchanger with #316 stainless steel HX coil(s), pin-type Calrod heating elements with Incoloy sleeves, adjustable temperature controller, low level switch with indicator light and NEMA 4X-rated control switches Dual or single lance/gun(s) with 50 ft. high-pressure wash hose(s) and high-pressure (upstream) or low-pressure (downstream) chemical injection

4 CONSIDER THE ADVANTAGES OF A PSC ELECTRICALLY HEATED PRESSURE CLEANING SYSTEM Flow switch controlled start/stop system with solid state time-delay shutdown Belt-driven plunger pump #316 stainless steel heat exchange coil(s) Pin-type Calrod heating elements with Incoloy sleeves FUNCTIONAL DESIGN: Ease of use - trigger gun controlled start/stop system with solid state time delay shutdown Instant hot water - heat exchanger is thermally insulated allowing for almost 100% energy input/output and continuous, efficient operation Large 70 gallon (single coil models) & 120 gallon (dual coil models) heater storage tanks - allows for continuous heat recovery even when trigger gun(s) not in use No open flame - can be installed in virtually any location Inherent pump protection - automatic high temperature shut down (thermo-probe) on pump bypass Compact - 24 x 32 footprint with 52 height (single coil models) RELIABLE PERFORMANCE: Low-rpm, belt-driven, oil-bath plunger pump - longer pump life when compared to direct drive systems Flow switch activated - not affected by small system leaks (i.e. trigger gun) #316 stainless steel heat exchanger coil(s) - designed for continuous-duty use No direct immersion of heating elements - no scale buildup or element burnout VERSATILE: 1000 psi to 5000 psi 2 gpm to 12 gpm Ideal centralized cleaning system Standard and explosion-proof models Full range of factory added options incl. portability carts, low and high-pressure surge arrestors, stainless steel frames and covers 208, 230, , VAC/3 phase/60 hz and 220, VAC/3 phase/50 hz models available 24, 48, 72, 96 and 115 kw input heat exchangers (custom-made models up to 230 kw) ASME B31.1, 2004 (Power Piping) code-compliant models available COST EFFECTIVE: Low installation cost - no venting required, can be installed virtually anywhere Low maintenance costs - heat exchanger coil does not require decalcification, only periodic pump oil changes required Low operating costs - compares favorably with fuel-fired and gas-fired machines and requires less kw input than direct-immersion type electrically heated models EASE OF MAINTENANCE: Pump/motor/controls/coil(s) easily accessible No water/soap scale buildup - skin temperature of heat exchanger coil never exceeds 190 F SAFETY: Vented-to-atmosphere heat exchanger design Low heat exchanger solution cut-off switch with indicator light Adjustable temperature controller CSA approved SUPPORT: Special application-designed systems Backed by qualified and responsive sales and technical personnel 3300 Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com

5 FOR CLASS 1 GROUP C & D HAZARDOUS LOCATIONS Consistent Performance, Reliable Operation, Ease of Maintenance... Why settle for anything less? Standard Series Hot Water High Pressure Cleaning System Offshore Series Hot Water High Pressure Cleaning System EXPLOSION-PROOF HIGH PRESSURE CLEANING SYSTEMS

6 EXPC COLD WATER HIGH PRESSURE CLEANING SYSTEMS STANDARD SERIES FEATURES: General belt-driven, oil-bath plunger pump with pressure regulator (multi-gun capability) and powder coat painted pulley guard CSA approved / UL listed explosion-proof motor 1800 rpm, IP56 ingress protection, 1.15 service factor, class F insulation Fully automatic start / stop circuit with solid state time delay shut down controlled by trigger gun activation Steel cage construction with mounting feet and lifting eyes powder coat painted Automatic high temperature shut down (thermo probe) for pump protection 50 ft. high pressure hose assembly complete with lance, trigger gun and chemical injection CSA approved / UL listed control box, heating elements, flexible coupling, conduit and seals CSA inspected and certified for use in Class 1, Division 1, Group C & D hazardous location environments OFFSHORE SERIES FEATURES: General belt-driven, oil-bath plunger pump with pressure regulator (multi-gun capability) and stainless steel pulley guard CSA approved / UL listed explosion-proof motor 1800 rpm, IP56 ingress protection, 1.15 service factor, class F insulation Fully automatic start / stop circuit with solid state time delay shutdown controlled by trigger gun activation Steel cage construction with drip proof pump base, mounting feet and lifting eyes galvanized to ASTM123 and CSA G164 M1981 specifications Automatic high temperature shut down (thermo probe) for pump protection 50 ft. high pressure hose assembly complete with lance, trigger gun and chemical injection CSA approved / UL listed control box, flexible coupling, conduit and seals CSA inspected and certified for use in Class 1, Division 1, Group C & D hazardous location environments Standard Flow Pressure Motor Full Load Current Dimensions Weight Model gpm psi hp 208v-3 ph 460v-3 ph 575v-3 ph l x w x h in. Lbs. ES420EA3-EX x 33 x ES429EA3-EX x 33 x ES440EA3-EX x 33 x ES543EA3-EX x 33 x Offshore Flow Pressure Motor Full Load Current Dimensions Weight Model gpm psi hp 208v-3 ph 460v-3 ph 575v-3 ph l x w x h in. Lbs. EOS420EA3-EX x 33 x EOS429EA3-EX x 33 x EOS440EA3-EX x 33 x EOS543EA3-EX x 33 x Note: models available from 2 gpm to 40 gpm / 300 psi to 6000 psi price on request COMMON FACTORY ADDED OPTIONS: CAT plunger or piston pump SA nitrogen charged pulsation dampener SRA surge relief assembly (for flows of 6 gpm and greater) PG liquid-filled pressure gauge LWPP low inlet water pressure protection with reset ETM-EXA (D) integrated analog (digital) hour meter USC upstream (high pressure) chemical injection PCA-EX portability feature with phenolic casters and push/pull handle HRA 13 (16) high pressure hose reel assembly with 13 in. (16 in.) drum EGR-50 enclosed grounding reel with 50 ft. grounding wire and clamp

7 EXPH HOT WATER HIGH PRESSURE CLEANING SYSTEMS STANDARD SERIES FEATURES: General belt-driven, oil-bath plunger pump with pressure regulator (multi-gun capability) and powder coat painted pump cover with louvered end covers CSA approved / UL listed explosion-proof motor 1800 rpm, IP56 ingress protection, 1.15 service factor, class F insulation Non-direct immersion heat exchanger with #316 stainless steel heat exchange coil, Calrod elements with Incoloy sleeves, adjustable temperature controller and low water (heat exchanger fluid) level switch Fully automatic start / stop circuit with solid state time delay shutdown controlled by trigger gun activation Steel cage construction with mounting feet and lifting eyes powder coat painted Automatic high temperature shut down (thermo probe) for pump protection 50 ft. high pressure hose assembly complete with lance, trigger gun and chemical injection CSA approved / UL listed control box, heating elements, flexible coupling, conduit and seals CSA inspected and certified for use in Class 1, Division 1, Group C & D hazardous location environments OFFSHORE SERIES FEATURES: General belt-driven, oil-bath plunger pump with pressure regulator (multi-gun capability) and stainless steel pump cover with mesh/louvered end covers CSA approved / UL listed explosion-proof motor 1800 rpm, IP56 ingress protection, 1.15 service factor, class F insulation Non-direct immersion heat exchanger with #316 stainless steel heat exchange coil, Calrod elements with Incoloy sleeves, adjustable temperature controller and low water (heat exchanger fluid) level switch Fully automatic start / stop circuit with solid state time delay shutdown controlled by trigger gun activation Steel cage construction with drip-proof pump base, mounting feet and lifting eyes galvanized to ASTM123 and CSA G164-M1981 specifications Automatic high temperature shut down (thermo probe) for pump protection Low inlet water pressure protection 50 ft. high pressure hose assembly complete with lance, trigger gun and chemical injection CSA approved / UL listed control box, heating elements, flexible coupling, conduit and seals CSA inspected and certified for use in Class 1, Division 1, Group C & D hazardous location environments Standard Flow Pressure Motor KW Full Load Current Dimensions Weight Model gpm psi hp Input 460v-3 ph 575v-3 ph l x w x h in. Lbs. ES420K448A-EX x 48 x ES420K472A-EX x 56 x ES429K448A-EX x 48 x ES429K472A-EX x 56 x ES440K448A-EX x 48 x ES440K427A-EX x 56 x Offshore Flow Pressure Motor KW Full Load Current Dimensions Weight Model gpm psi hp Input 460v-3 ph 575v-3 ph l x w x h in. Lbs. EOS420K448A-EX x 48 x EOS420K472A-EX x 56 x EOS429K448A-EX x 48 x EOS429K472A-EX x 56 x EOS440K448A-EX x 48 x EOS440K427A-EX x 56 x Note: models available from 2 gpm to 10 gpm / 1000 psi to 5000 psi price on request

8 APPLICATION: CLEANING AND DE-ICING OF EQUIPMENT AND WALKWAYS ON OFFSHORE OIL RIG FUNCTIONAL DESCRIPTION: The EOS429K448AS-EX1 explosion-proof, hot water pressure washer is designed to provide pressurized hot water, under controlled conditions, for the task of cleaning or de-icing of material surfaces while operating in hazardous location environments with ambient temperatures ranging from -40ºF to +120ºF (-40ºC to +50ºC). DESIGN: System output: 4 gal. / min. at 2900 p.s.i.g. (15.1 lit. / min. at kpa) Temperature output range: 85ºF to 185ºF (30ºC to 85ºC) Electrical data: 600 VAC primary / 3 phase / 60 hertz / 52 full load amps / 120 VAC control Heat exchanger input: 48 kw (163,800 btuh) High pressure pump motor: 10 hp (7.5 kw) Centrifugal pump motor: 1.5 hp (1.1 kw) Heat exchanger tank capacity: 70 gal. (265 lit.) Heat exchanger fluid: aqueous-based, non-bioactive ionic fluid with oil-based vapor barrier no dilution Anti-freeze tank capacity: 5.5 gal. (20.8 lit.) Anti-freeze material: propylene glycol no dilution System dimensions: 65 in.l x 56 in.w x 62 in.h (1651 mm x 1422 mm x 1575 mm) System weight: dry 2187 lbs. (992 kg.) / operating 2822 lbs. (1280 kg.) CONSTRUCTION: FRAME STRUCTURE: carbon steel (level II traceability / CSA G WT) galvanized to ASTM-123 and CSA G164-M1981 standards. LIFTING LUGS: carbon steel (Charpy tested / level II traceability / CSA G grade 260WT) galvanized to ASTM-123 and CSA G164-M1981 standards. Each lug and associated weld load tested and certified at not less than 1320 lbs (600 kg.) ENCLOSURE (BODY / LATCHES/HARDWARE): #316 stainless steel (level II traceability) isolated from frame structure with weather-rated gaskets and/or gasket material. Complies with zero-tolerance water ingress requirements. DOCUMENTATION: I / O / M (Installation / Operation / Maintenance) and Certification Manuals Dimensional Drawings all aspects Bill of Materials Center of Gravity and Load Calculation Data and Report Material Traceabililty Certificate Sound Power / Pressure Level Test and Report Hydrostatic Test and Report Weld Strength Tests and Report Magnetic Particle and Liquid Penetrant Type Enclosure Integrity Test and Report Water Ingress System Inspection / Testing and Conformity-to-Order Reports STANDARD EQUIPMENT: 200 ft. x 1 2" inner diameter high pressure wash hose mounted on 225 ft. capacity, powder coat painted high pressure hose reel with 5000 psi rated stainless steel swivel, 42" high pressure wand, trigger gun and nozzle selection JBEW explosion-proof control box with reset (manual/anti-freeze) /off/auto control switch, emergency shutdown pushbutton, motor/heater control, intrinsically-safe circuit and 1 1 2" sweep elbow with certified explosion-proof seal Belt-driven, oil-bath triplex plunger pump with pressure regulator, thermo shield pump protection system, liquid-filled pressure gauge and #316 stainless steel belt guard mounted on galvanized drip-proof base Direct-driven centrifugal feed pump with by-pass 10 h.p. explosion-proof high-pressure pump motor IP55, 1800 rpm, 1.15 service factor 1.5 h.p. explosion-proof centrifugal pump motor IP55, 3600 rpm, 1.15 service factor Weather-tight system enclosure with #316 stainless steel side and bottom panels, access doors and tapered roof with drain gutter, and Marine-grade hardware Manually activated winterizing system with control valve and anti-freeze reservoir PSC Cleaning Systems, Inc FAX: info@pscclean.com Providing Engineered Cleaning Solutions Since 1969

9 VFD (VARIABLE FREQUENCY DRIVE) MULTI-GUN PRESSURE CLEANING SYSTEM A PSC VFD Cleaning System provides the versatility and reliability demanded for today s toughest cleaning applications. Designed for multi-user environments, a VFD-series system can be built to meet specific design and performance requirements, ensuring maximum productivity and cost-effective cleaning time and again! Model shown: ES1618EA3VFDPF GPM at 1800 PSIG FUNCTIONAL DESIGN: Real-time system monitoring and control (wash station duty cycle/activity, low inlet water supply and system pressure loss shutdown, and high water temperature shutdown) Compact and versatile design allows for installation in virtually any location/environment Systems designed/built to application requirements - provides for increased productivity Optional water quality (total displaced solids) and temperature monitoring available STANDARD EQUIPMENT: Belt-driven, industrial-duty plunger or piston pump with multi-gun pressure regulator, pilot-activated flow switch, factory-set pressure relief valve and liquid-filled pressure gauge VFD controller with performance/event data logging (stand-alone and remote monitoring) Premium-efficiency, inverter-duty motor (IP55, Class B temp. rise, Class F insulation, 40º C ambient temp. design) Above mounted on heavy-duty base with rubber isolation mounts and pump cover (optional belt guard available) I/O/M (Installation/Operation/Maintenance) manual Food-grade and lab-grade designs available 3300 Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com 2012 PSC Cleaning Systems Inc. All rights reserved.

10 PSC CLEANING SYSTEMS INC. MULTI-STAGE / CENTRALIZED PUMPING AND PRESSURE WASHING SYSTEMS 2S1430EAS psi with high temperature pump seals and thermostatic shutdown 4S2010EAS psi with stainless steel frame, pump bases and belt guards 3S1022EAS psi designed for future addition of 4 th pump/motor package WHAT IS A MULTI-STAGE CLEANING SYSTEM? Certain cleaning operations require more than one person to be cleaning at the same time. Using single operator units at each cleaning job can be expensive and places the responsibility for care of the equipment in the operator s hands. A multi-stage cleaning system is a series of motor-pump packages connected to the same set of controls and responds to the demand for high pressure water by automatically staging in or starting only the number of pumps needed to meet this demand. Conversely, as the demand for water falls, the pumps stage out or turn off. By locating the unit in a convenient location and plumbing it to the cleaning areas, the operator need only connect the high pressure hose / gun assembly at a cleaning station and squeeze the trigger to operate the machine, thus protecting the equipment from potential misuse. HOW DOES IT WORK? The high pressure water (usually between 1000 and 3000 psi) leaves the pumping unit and travels through a network of high pressure piping to the areas where cleaning is required. The termination points of the pipe are vertical drops approximately five feet from the ground and usually consist of a PSC CS-1 Cleaning Station with a quick disconnect. The CS-1 allows for the introduction of cleaning chemicals into the high pressure water stream where it is then discharged through a high pressure hose assembly with a trigger gun / wand, without effecting the overall system pressure. The system is controlled by an automatic stop/start circuit (trigger gun activated) consisting of a flow switch wired to the pump motor control. Once the trigger gun is activated, the flow switch senses a demand for water and signals the control to start the pump motor; with hot water systems the heater is now automatically engaged. Depending on how much piping is used in the distribution system the entire process, whether one or more trigger guns are activated, usually takes place in less than a second. A timer automatically shuts off the centralized pressure washer after 10 to 15 seconds if no high pressure water is called for, preventing excessive stops/starts with multiple gun systems. THE ADVANTAGES! Because the centralized system is not moved from place to place, it offers the possibility of using larger pump/motor combinations for multiple outlet applications and when used in conjunction with a heater positioned downstream of the pump, will only heat the water being called for. Additionally, with the use of an electric heat exchanger, no flammable fuel source is required and the system can be installed anywhere. A PSC centralized cleaning system allows for higher productivity and long-term cost savings when compared to portable propane or oil-fired cleaning equipment and, more importantly, offers the flexibility demanded in today s working environment. PSC Multi-Stage / Centralized cleaning systems are designed to fit your cleaning requirements, thus eliminating the need of having to adapt your cleaning requirements to an off-the-shelf machine.

11 HIGH System controls include: Low inlet water pressure protection. Inlet water temperature protection. Monitors the inlet water pressure and the inlet water temperature and stalls the system when unsafe conditions are experienced. An illuminated reset button will light when this occurs. When safe levels are restored, the system can be reset and cleaning can continue. Complete automatic operation. Controlled by flow switches, the operator does not need to be in the same area as the equipment to operate it. When connected to a network of high pressure piping, cleaning can begin by simply connecting a high pressure hose / gun assembly to strategically placed cleaning stations, opening a ball valve and squeezing the trigger gun. Time consuming set up and relocating of equipment is eliminated. In addition the potential for misuse of the equipment is minimized. Selector switches. Individual pump control switches and a primary pump selector switch provide the ability to alternate which pump is to start first, as well as allowing either pump to be taken off-line for servicing. Motor circuit protection. Motor circuit fusing, overload protection as well as control circuit fusing are standard. Pump system: Continuous-duty piston or plunger pumps are belt driven by high efficiency motors. The system is flow switch activated and monitored, and includes solid state time delay shutdown to protect the system components from severe loads due to the various guns opening and closing. Regulating unloader valve(s) maintain the system pressure and Check valves are fitted on each pump unit to isolate and protect them. The system is mounted on a heavy duty, powder coated steel frame, with individual steel pulley guards. Inlet and discharge accumulators are included. * In cases when the feed water is supplied from a holding tank, we recommend that a circ. pump be fitted to the feed tank to ensure that the high pressure pumps do not starve for water. This circ. pump may be connected to the system controls making it completely automatic as well. TYPICAL APPLICATIONS: FOOD PROCESSING FACILITIES PHARMACEUTICAL COMPANIES PULP AND PAPER MILLS CARGO SHIPS RENDERING PLANTS AUTOMOTIVE DEALERSHIPS HOTELS AND CONVENTION CENTRES ANY MULTI-OPERATOR CLEANING APPLICATION HIGH PRESSURE PIPING CLS QUICK CONNECT STATION SHUT-OFF VALVE M22 MALE QUICK CONNECT CS-1 CLEANING STATION VALVE OPEN = HIGH PRESSURE RINSE VALVE CLOSED = SOAP INJECTION M22 FEMALE QUICK CONNECT M22 MALE QUICK CONNECT M22 FEMALE QUICK CONNECT PRESSURE HOSE CONNECTION (TO DISTRIBUTION PIPE OR WASH GUN) FACTORY ADDED OPTIONS: PSC CLS/CS-1 for remote chemical injection CLS Cleaning Station Assembly c/w ½ ball valve and hose quick connect CS-1 Chemical Injection Station c/w adjustable chemical injector, wash/rinse control valve and swivel connection CS-1 SSB Chemical Injection Station (as above) housed in lockable stainless steel panel box LWPP Low Inlet Water Pressure Protection SA Nitrogen Charged pump pulsation Surge Arrestor SRA Surge Relief Assembly (must be installed on domestic water supply line when the supply line has a back-flow preventer, pressure reducing or check valve present) ETM Elapsed Time Meter All PSC Multi-Stage / Centralized cleaning systems are available with optional stainless steel frame, pump bases and covers for food grade applications please consult your distributor for pricing and assistance in determining the right PSC multi-stage/centralized system for your application PSC Cleaning Systems Inc Steeles Ave. W., Concord, Ontario L4K 2Y4 Website: info@pscclean.com 1999 PSC Cleaning Systems Inc. All specifications subject to change without notice Distributed by:

12 GAS-FIRED HIGH-PRESSURE CLEANING SYSTEMS S620G40A - 6 gpm at 2000 psi (395,000 BTUH input) with optional ARS auto re-light system and SRA surge relief assembly FEATURES: CSA approved for use with Class B exhaust vent Belt-driven, oil bath plunger pump with thermo-probe protection and multi-gun pressure regulating valve Trigger gun activated, flow switch controlled auto start/stop system with solid state time delay shutdown Ideal centralized systems for multi-user applications S12182G40A - 12 gpm at 1800 psi (790,000 BTUH input) with optional CAT pump and SRA surge relief assembly Modulating gas thermostat control ensures steady temperature output up to 200 F 395,000 BTUH input rated heater with adjustable temperature controller and factory-set safety relief valve 3/4 in. schedule 80 heating coil with stainless steel wrap and 10 in. draft diverter MODEL PERFORMANCE/DESIGN DATA MODEL NO. Flow GPM Pressure PSIG Motor H.P. Full ~230V/1 PH Load ~208V/3 PH Current ~480V/3 PH (Amps) ~575V/3 PH Dimensions L x W x H Weight LBS. S411G40A /38/ S420G40A /38/ S429G40A /38/ S543G40A /38/ S562G40A /38/ S612G40A /38/ S620G40A /38/ S812G40A* /38/ S820G40A* /38/ S830G40A* /38/ S1030G40A* /38/ * includes (2) 40 in. single lance gun assemblies, (2) 50 ft. x 3/8 in. high-pressure wash hoses and high-pressure (upstream) chemical injection STANDARD EQUIPMENT: Belt-driven General ceramic plunger pump with thermal protection, adjustable pressure regulator and liquid-filled pressure gauge Dual or single lance/gun(s) with 50 ft. x 3/8 in. highpressure wash hose(s) COMMON FACTORY-ADDED OPTIONS: SRA ARS Automatic re-light system for pilot light LWPP ETM Hour Meter CLS CS-1 Modulating gas valve with adjustable temperature controller Large-capacity 3/4 in. I.D. schedule 80 heating coil with stainless steel wrap, draft diverter and safety relief valve Low-pressure (downstream) or high-pressure (upstream) chemical injection Surge Relief Assembly (for installation on water supply line when backflow preventer or check valve present) Low Inlet Water Pressure Protection with illuminated reset button Cleaning Station assembly with 1/2 ball valve and hose quick connect Chemical Injection Station with adjustable chemical injector, wash/rinse control valve and swivel connection 2G40 Additional G40 heater with extended frame for a total BTUH input of 790, Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com

13 ENGINEERED PUMPING AND PRESSURE CLEANING SYSTEMS A PSC Engineered Cleaning System can be built to meet specific design requirements for virtually any low, medium or high-pressure washing or pumping application. Our commitment to design excellence and quality manufacture, supported by qualified and responsive personnel, ensures superior system performance and reliability. System Application: Cleaning and de-icing of equipment and walkways aboard offshore gas rig Design Requirements: Tested, validated and certified for use in Class 1, Division 1, Group C & D hazardous locations. Operate in environment with -40 F to +120 F ambient temperatures. Enclosure constructed to zero-tolerance water ingress specifications. System Application: Pumping de-ionized water with ammonium EDTA through piping and tube bundles. Design Requirements: Pressure boundary material and components tested, calibrated and certified to ASME B31.1, 2004 code standards and N285.0, Class 6 code requirements for nuclear facilities. PSC DESIGNS INCLUDE: Electrically heated aircraft de-icing system for use on regional aircraft Air-driven and electric-driven pumping packages for high-pressure water injection and drill bit cooling in underground mining applications Integrated, variable volume pumping systems for use with water soluble cutting oil on CNC machines Automated tote and mixing tank cleaning/sanitizing systems used in pharmaceutical manufacturing High volume, high pressure pumping systems for egg carton extrusion press cleaning Variable volume pumping systems utilizing hot and cold de-ionized water for automated printed circuit board cleaning High-pressure systems for cleaning with heavy water in nuclear reactors Electrically heated systems for high-pressure cleaning with vegetable oils in food-grade applications SYSTEM DESIGNS/SERVICES: Full selection of industrial-duty positive displacement piston/plunger pumps Graded/Certified/Registered pressure boundary material (C.R.N., A.S.M.E.) Calibrated/Certified/Registered pressure and flow control components (C.R.N., A.S.M.E.) Safety, operational and limit testing with certified data/reports (i.e. hydrostatic, sound power, load/stress, NDE/NDT) Food-grade and lab-grade designs PLC control with performance/event data logging (stand-alone and remote monitoring) 3300 Steeles Ave. West, Concord, Ontario, Canada L4K 2Y4 tel: / fax: info@pscclean.com 2012 PSC Cleaning Systems Inc. All rights reserved.

14 Engineered Pumping and Pressure Cleaning Systems A PSC Engineered Cleaning System can be built to meet specific design requirements for virtually any low, medium or high-pressure washing or pumping application. Our commitment to design excellence and quality manufacture, supported by qualified and responsive personnel, ensures superior system performance and reliability. PSC MODEL 2XS830K2472AS 480 W\PCO50 & DUAL FILTRATION SYSTEM 2 pumping systems each rated 2900 psi 2 x 15 hp, 460 volt, 3 phase TEFC motors 72 Kw heat exchanger Amp draw - approx. 108 amps CUSTOM OilSands High pressure cleaning system For heavy equipment cleaning /Undercarriage Bitumen removal/ reduces maintenance & service issues and extends the life of company vehicles *System came with 2 units mounted in an enclosed trailer, fully plumbed and wired, w\thermostatic space heaters as well as a completely separate electrical room INCLUDES: CSA approved Automatic start/stop pump with flow switch controls and solid state time delay shutdown Automatic high temperature shut down (pump protection) Automatic low water supply system shutdown and automatic reset (2 x float switches in 50 gallon water supply tank) System pump 1 or pump 2 selector switch (allows you to choose which pump you want to run, regularly switch for equal run time hours or use as a back-up pump) Belt driven ceramic plunger pump (GENERAL T2535 pump rated psi de-rated to 5 gpm industrial duty pump) Adjustable pressure regulators c/w oversized bypass hoses and back-up safety relief valves Inlet water filter Discharge pressure gauges Discharge isolation ball valves Low water level indicator light (for heater tank fluid level) misc. plumbing (inlet, discharge & bypass-ports, hoses & fittings) 24v relay and terminal in control box System is also available in 575 volt 3 phase Approximate dimensions: Each unit 60 l x 50 w x 68 h Separate pump/heater controls 130 gallon heat exchanger tank Fully automatic heat exchanger with low water level safety shut down Dual 316 stainless steel heater coils Low tank level heater shut down Fully insulated heater tank is virtually 100% energy efficient Tube type incolloy elements Adjustable temperature control Pump mounted on heavy duty base with protective belt guard **PCO50 50 Gallon feed tank: inlet water float valve pilot line for system activation low water level shut down and auto reset misc. plumbing (inlet, discharge & bypass-ports, hoses & fittings) 24v relay and terminal in control box All of the above mounted on a heavy duty powder coat paint frame with water supply tank mounted above pumping packages PROVIDING CLEANING & PUMPING SOLUTIONS SINCE 1969 PSC CLEANING SYSTEMS INC STEELES AVE. WEST, CONCORD, ONTARIO L4K 2Y4 Tel: / Fax: Website: info@pscclean.com

15 Common Factory Added Options HEAT EXCHANGER ETM PUMP OPTION 3-SS 3S8-SS WB WB-2 WBSS 3ELV 3ES8LV CWBE CWBG CWBB PCA HD-PCA HD-PCAS8 SRA SRA SA ARS LWPP-1/2 LWPP-3/4 QS1/QS2 LWLI HTSD ETM CLS/CLS-3 CS-1/CS1-3 CS1-SSB/ CS1-3SSB SS-HEATER SS-TANK SS-HEATER DUAL SS-DUAL TANK VFD CLS & CS-1 CWBE HD-PCA DESCRIPTION #316 Stainless Steel Pump Cover #316 Stainless Steel Pump Cover for 15 & 20 h.p. models Wall mounting brackets (powder coat painted) Wall mounting brackets for 15 & 20 h.p. models (powder coat painted) Wall mounting brackets (stainless steel) Louvered end covers Louvered end covers for 15 & 20 h.p. models Cold Water Bypass System, instant change from hot to cold water applications Cold Water Bypass System, instant change from hot to cold water applications Cold Water Blasting System (to bypass the heater for cold water blasting applications) includes 50 x 1/2 high pressure hose and water blast gun Portable Cart Assembly c/w 6 locking casters and push handle Heavy Duty Cart (Trolley) Assembly c/w heavy duty frame, 6 locking casters, push handle or tow bar - allows for mounting of extra equipment Portability kit c/w 6 casters (2 rigid-locking/2 swivel) and push handle or tow bar (S812, S820 & S830 EHA/EXPH electrically heated models) Surge Relief Assembly (must be installed on the domestic water supply when the supply line has a back flow preventer, pressure reducing or check valve present) Nitrogen Charged pump pulsation Surge Arrestor Automatic re-light system to ensure pilot light remains on Low Inlet Water Pressure Protection - ½ fittings Low Inlet Water Pressure Protection - ¾ fittings Trigger gun controlled/flow switch activated quick start system Low water level indicator light High inlet water temperature shutdown Hour Meter Cleaning Station assembly, (for multi-user applications) c/w 1/2 ball valve and hose quick connect Chemical Injection Station, (for multi-user applications) c/w adjustable chemical injector, wash/rinse control valve and swivel connection Chemical Injection Station, (as above) housed in lockable stainless steel panel #316 Stainless Steel Heat Exchanger Shell includes wrap, panel cover and pan cover #304 Stainless Steel Heat Exchanger Tank #316 Stainless Steel Heat Exchanger Shell includes wrap, panel cover and pan cover (for 8 gpm models) #304 Stainless Steel Heat Exchanger Tank (for 8 gpm models) VARIABLE FREQUENCY DRIVE -Available Specifications:1000 psig to 5000 psig / 8 gpm to 100+ gpm In addition to the options shown above, PSC offers an extensive range of factory-added options and aftermarket parts & accessories PSC Cleaning Systems Inc Steeles Ave. W., Concord, Ontario L4K 2Y4 Website: info@pscclean.com 2003 PSC Cleaning Systems Inc., all rights reserved All specifications contained herein subject to change without notice SEA SERIES EHA SERIES G25/P25 SERIES G40/P40 SERIES EXPC SERIES EXPH SERIES MULTI-STAGE