39 Functions. 20 General information. 25 Display Button. 30 Strainer waste control. 30 Flow volume control. 41 Safety information

Size: px

Start display at page:

Download "39 Functions. 20 General information. 25 Display Button. 30 Strainer waste control. 30 Flow volume control. 41 Safety information"

Tobias McGee
5 years ago
Views:

Dornbracht Manual 53 Rotary knob 55 On/Off 57 Volume adjustment 58 Temperature adjustment 59 Electronic pop-up waste and overflow set 9 Starting a scenario 9 Automatic filling 9 Starting a comfort

1 Dornbracht Manual 53 Rotary knob 55 On/Off 57 Volume adjustment 58 Temperature adjustment 59 Electronic pop-up waste and overflow set 9 Starting a scenario 9 Automatic filling 9 Starting a comfort function 52 Display button 53 Rotary knob 13 General terms and conditions 14 Replacement of fragrance bottles 15 Reordering fragrance bottles 17 Starting a choreography 39 Functions 20 General information 25 Display Button 53 Rotary knob 55 On/Off 57 Volume adjustment 58 Temperature adjustment 30 Strainer waste control 30 Flow volume control 52 Display button 41 Safety information 42 Product configurations 38 Logic controls 38 Logic controls 39 Functions 41 Safety information Culturing Life

2 38 Logic controls 39 Functions 36 Scenarios 37 Comfort Functions 41 Safety information 38 Logic controls 39 Functions 40 Choreographies 41 Fragrance 51 Individual configuration 52 Resetting all outlet points 52 Display button 53 Rotary knob 55 On/Off 57 Volume adjustment 58 Temperature adjustment 59 Electronic pop-up waste and overflow set 59 Cleaning 59 Service display 61 Service Display 61 Service Display 61 Service Display 62 Waiting display 62 Waiting display 41 Safety information 42 Product configurations 62 Waiting display 55 On/Off 57 Volume adjustment 58 Temperature adjustment

3 62 Waiting display 63 Maintenance 63 Safety deactivation 64 Disposal 64 Disposal

4 Rotary knob Volume Temperature September 2013 Page 2 of 67

5 The Foot BathATT has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the System will return to automatic sleep mode. The pre-defined water volume is 80%, the predefined temperature 38 C. Individual settings are saved for five minutes after the water has been switched off. Ready 1 Ready 2 Sleep mode September 2013 Page 3 of 67

6 On/Off using rotary knob using rotary knob September 2013 Page 4 of 67

7 using display button using display button Jet activation If the jets are activated manually, the strainer waste will first close and water will be let in automatically. As soon as an adequate water level has been reached, the water flow will stop and the jets will start. You can stop the jets by pressing the button a second time September 2013 Page 5 of 67

8 Volume adjustment September 2013 Page 6 of 67

9 Temperature adjustment Disable scalding protection system 1 = turn to max 2= push + turn at the same time The scald protection system will be re-enabled after 10 minutes September 2013 Page 7 of 67

10 Electronic pop-up waste and overflow set Close / Open You can choose between two automatic scenarios: 1 Relax The RELAX scenario stimulates your circulation, while relaxing and warming you. Your feet will initially be dipped in lukewarm, shallow water after which the temperature and water level will rise slowly until, after 15 relaxing minutes, you leave the foot bath, dry your legs and ideally spend a further 10 minutes lying down and relaxing. 2 Vitalize The VITALIZE scenario relieves stress, while also refreshing and stimulating you. Your feet are initially dipped into warm, shallow water after which the four jets start to massage your reflex zones with increasing pressure intensity and fluctuating temperatures. Gradually, a stimulating feeling will flow through your whole body and will remain long after you finish your foot bath. This scenario lasts 5 minutes September 2013 Page 8 of 67

11 Starting a scenario During a scenario temperature may be changed by +/- 2 C and water volume by +/- 20%. Pressing any rotary knob or display button enables you to terminate a scenario prematurely. Automatic filling The comfort functions enable you to fill the bath automatically up to a preset depth, either up to your ankles or calves. The default temperature is 38 C. Starting a comfort function September 2013 Page 9 of 67

12 Display button 1 = Head spray On/Off Display button 1 2 = Rain curtain On/Off 3 = Hand shower On/Off 4 = Body spray On/Off 5 = readjust On/Off Display button 2 6 = rejoice On/Off 7 = Cold-water mist On/Off 8 = release On/Off 9 = Fragrance readjust On / Off Display button 3 10 = Fragrance rejoice On/Off 11 = Shower zone lighting On / Off 12 = Fragrance release On/Off September 2013 Page 10 of 67

13 Rotary knob Volume Temperature September 2013 Page 11 of 67

14 The fragrances to match the choreographies are a special feature of SENSORY SKY. Just like the water and light settings they are inspired by weather phenomena and the moods of Mother Nature. The fragrances enhance the choreography and help your feeling of wellbeing both consciously and unconsciously. They can also be selected independently of the choreographies to enrich your individual shower experience. All fragrances are made of high-quality, natural and nature-identical essential oils, aromas and balsams and have been approved by the International Fragrance Association (IFRA). The fragrance for readjust Warm, green, balsamic fragrance with a fresh woody tone and a herbaceous, sweet fruity character. Relaxes, liberates and strengthens, acts mainly via the psyche, lifts your mood. A mixture of needle notes, orange citrus fragrances, meadow herbs and berries. The fragrance for release Fresh green grassy citrus fragrance to the fore with an earthy, moss base. Refreshes, has an earthing effect, strengthens and balances and also lifts your mood via your psyche. A mixture of chlorophyll, birch, lemon grass and citrus notes. The fragrance for rejoice A poetic wave-shaped composition which has an illuminating, stimulating and flowery effect. Green, fresh and clear to the fore with a sweet, spicy and woody, warm character. A mixture of green leaves, mint, warm wood notes and herb fragrances September 2013 Page 12 of 67

15 General terms and conditions We accept liability for our products on the basis of the statutory regulations as long they have been installed, maintained and operated in accordance with our specifications. We do not have any experience about the suitability of other fragrances and therefore we cannot accept any liability if you use substances other than those we recommend September 2013 Page 13 of 67

16 Replacement of fragrance bottles As soon as a fragrance is empty, the icon will be shown in grey. This is a request to replace the fragrance bottle. The 200 ml bottle will last for approx. 230 minutes at default settings. Proceed as shown in drawings 1 to 4 to replace a fragrance bottle September 2013 Page 14 of 67

17 Confirm replacement Please follow the safety instructions on the label and on the instruction leaflet of the fragrance when replacing and disposing of the completely empty bottles. Reordering fragrance bottles All the information you need to (re)order SENSORY SKY fragrances is available at: September 2013 Page 15 of 67

18 You can choose between two automatic scenarios: 1 readjust READJUST sharpens the senses. Mist and warm rain reduce the daily flood of stimuli to a pleasant minimum until the sky gradually clears and perception is more focussed and intensified: where is this pleasantly soft dry forest floor fragrance coming from? 2 release RELEASE is an intensive summer rain which is both cleansing and liberating. Accumulated energies erupt in an expressive choreography composed of different types of rain and different temperatures accompanied by a refreshing, tropical-like fragrance. 3 rejoice REJOICE protects, envelops and stabilises. The external rain curtain is a projection screen for the light with water drops sparkling in all the colours of the rainbow a multifaceted, harmonious interplay of colours and fragrances which is gradually transferred to the whole body September 2013 Page 16 of 67

19 Starting a choreography During a choreography temperature may be changed by +/- 2 C and water volume by +/- 20%. Pressing any rotary knob or display button enables you to terminate a choreography prematurely September 2013 Page 17 of 67

20 Logic controls September 2013 Page 18 of 67

21 Functions September 2013 Page 19 of 67

22 General information September 2013 Page 20 of 67

23 Typ: eunit Kitchen Power consumption: max. 18 W Nominal voltage: V ~ Hz Nominal current: 0,6 A Protection (control elements): IP X4 Protection (Motherboard and evalve): IP X4 Aloys F. Dornbracht GmbH & Co. KG Armaturenfabrik Köbbingser Mühle 6, D Iserlohn Tel. +49(0) , Fax +49(0) mail@dornbracht.de, dornbracht.com September 2013 Page 21 of 67

24 Type: Foot Bath Power consumption: max. 60 W Nominal voltage: v ~ Hz Nominal current: 1,5 A Protection (control elements): IP X4 Protection (Motherboard and evalve): IP X4 Aloys F. Dornbracht GmbH & Co. KG Armaturenfabrik Köbbingser Mühle 6, D Iserlohn Telefon +49(0) , Fax +49(0) mail@dornbracht.de, dornbracht.com September 2013 Page 22 of 67

25 Type: Sensory Sky Power consumption: max. 180 W Nominal voltage: v ~ Hz Nominal current: 4,5 A Protection (control elements): IP X4 Protection control and distribution unit (motherboard, evalve, lighting control module): IP 54 Aloys F. Dornbracht GmbH & Co. KG Armaturenfabrik Köbbingser Mühle 6, D Iserlohn Tel. +49(0) , Fax +49(0) mail@dornbracht.de, dornbracht.com September 2013 Page 23 of 67

Tub, Bidet, Shower Power consumption: max.

26 Type: Smart Sets for Basin Power consumption: max. 18 W Nominal voltage: v ~ Hz Nominal current: 0,6 A Protection (control elements): IP X4 Protection (motherboard, evalve): IP X4 Type: Smart Sets for Tub, Bidet, Shower Power consumption: max. 60 W Nominal voltage: v ~ Hz Nominal current: 1,5 A Protection (control elements): IP X4 Protection (motherboard, evalve): IP X4 Aloys F. Dornbracht GmbH & Co. KG Armaturenfabrik Köbbingser Mühle 6, D Iserlohn Tel. +49(0) , Fax +49(0) mail@dornbracht.de, dornbracht.com Freely positioned Integrated in the sink unit September 2013 Page 24 of 67

27 Display Button 1 = Water On / Off 2 = Flow volume control 0,1 0,9 l 3 = Strainer waste Close / Open 4 = Flow volume control 1 9 l Rotary knob Volume Temperature September 2013 Page 25 of 67

28 The eunit KITCHEN has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the system (including the foot sensor) will return to automatic sleep mode. The pre-defined water volume is 80%, the pre-defined temperature 28 C. Individual settings are saved for five minutes after the water has been switched off. Ready Sleep mode On/Off using rotary knob September 2013 Page 26 of 67

29 using display button using foot sensor September 2013 Page 27 of 67

30 Volume adjustment Volume September 2013 Page 28 of 67

31 Temperature adjustment Temperature adjustment Disable scalding protection system 1 = turn to max 2= push + turn at the same time The scald protection system will be re-enabled after 10 minutes September 2013 Page 29 of 67

32 Strainer waste control Close / Open Flow volume control Pressing the left key several times enables you to select between 1.0 and 9.0 l. Pressing the right key several times enables you to select between 0.1 and 0.9 l. Display button September 2013 Page 30 of 67

33 1 = WaterFall On / Off Display button 1 2 = Jets On / Off 3 = Electronic pop-up waste and overflow set 4 = Affusion pipe On / Off 5 = Scenario Relax On / Off Display button 2 6 = Fill calf deep On / Off 7 = Scenario Vitalize On / Off 8 = Fill ankle deep On / Off Safety information The eunit KITCHEN can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowledge, if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and maintenance must not be carried out by children without supervision September 2013 Page 31 of 67

34 Product configurations Logic controls September 2013 Page 32 of 67

35 Functions Safety information The Foot BathATT can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowledge, if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and maintenance must not be carried out by children without supervision September 2013 Page 33 of 67

36 Logic controls September 2013 Page 34 of 67

37 Functions September 2013 Page 35 of 67

38 Scenarios September 2013 Page 36 of 67

39 Comfort Functions Safety information The SENSORY SKY can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowledge, if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and maintenance must not be carried out by children without supervision. Because small quantities of a fragrance are added to the water emerging from SENSORY SKY, we are legally obliged to inform you that the water that emerges from SENSORY SKY is not drinking water September 2013 Page 37 of 67

40 Logic controls September 2013 Page 38 of 67

41 Functions September 2013 Page 39 of 67

42 Choreographies September 2013 Page 40 of 67

43 Fragrance Safety information The SMART SET can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowledge, if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and maintenance must not be carried out by children without supervision September 2013 Page 41 of 67

44 Product configurations September 2013 Page 42 of 67

Waiting display If a function has been selected but is not yet ready (e.g. the set temperature), the appropriate symbol will flash. It will stop flashing as soon as the function is ready for use.

45 Waiting display If a function has been selected but is not yet ready (e.g. the set temperature), the appropriate symbol will flash. It will stop flashing as soon as the function is ready for use. Sleep mode The Sensory SkyATT has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the System will return to automatic sleep mode. The pre-defined water volume is 80%, the pre-defined temperature 38 C. Individual settings are saved for five minutes after the water has been switched off. Ready - Display button September 2013 Page 43 of 67

46 1.0 - September 2013 Page 44 of 67

47 Ready - Display button 2 Ready - Display button September 2013 Page 45 of 67

48 On/Off using rotary knob using rotary knob September 2013 Page 46 of 67

49 using display button Cold-water mist The temperature and volume cannot be adjusted. Light The light colour and intensity cannot be adjusted September 2013 Page 47 of 67

50 Fragrance The fragrance is automatically supplied in the water in the rain curtain. It is not possible to activate more than one fragrance at any one time September 2013 Page 48 of 67

51 Volume adjustment September 2013 Page 49 of 67

52 Temperature adjustment Disable scalding protection system 1 = turn to max 2= push + turn at the same time The scald protection system will be re-enabled after 10 minutes September 2013 Page 50 of 67

53 Individual configuration If several outlet points are active at the same time, individual points can be selected by pressing and holding them. The temperature and volume can then be set individually for this outlet point September 2013 Page 51 of 67

54 Resetting all outlet points Pressing both rotary knobs at the same time will reset the temperature and volume to their default values. Display button 1 = Outlet point 1 On/Off 2 = Outlet point 2 On/Off 3 = Electronic pop-up waste and overflow set Open/Close September 2013 Page 52 of 67

55 Rotary knob Volume Temperature All Smart Sets consist of two rotary knobs (one to adjust the temperature and one for the volume). There is also a display button with a different display configuration. 1 outlet point For controlling one outlet point at a washstand or bidet September 2013 Page 53 of 67

56 2 outlet points For controlling two outlet points at a washstand or in the shower. 2 outlet points incl. electronic pop-up waste and overflow set For controlling two outlet points and the electronic pop-up waste and overflow set at the bathtub September 2013 Page 54 of 67

57 The SMART SET has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the system will return to automatic sleep mode. The pre-defined water volume at the activated outlet points amounts to 80% of the maximum volume, the pre-defined temperature is 38 C. Individual settings are saved for five minutes after the water has been switched off. Ready Sleep mode On/Off using rotary knob using rotary knob September 2013 Page 55 of 67

58 using display button September 2013 Page 56 of 67

59 Volume adjustment Volume September 2013 Page 57 of 67

60 Temperature adjustment Temperature adjustment Disable scalding protection system 1 = turn to max 2 = push + turn at the same time The scald protection system will be re-enabled after 10 minutes September 2013 Page 58 of 67

61 Electronic pop-up waste and overflow set Close / Open Cleaning Key lock Service display September 2013 Page 59 of 67

62 If one of the symbols is lit in red for 2 seconds, contact your dealer or the Dornbracht Service Department. Service Display If one of the symbols is lit in red for 2 seconds, contact your dealer or the Dornbracht Service Department. Service Display September 2013 Page 60 of 67

63 If one of the symbols is lit in red for 2 seconds, contact your dealer or the Dornbracht Service Department. Service Display If one of the symbols is lit in red for 2 seconds, contact your dealer or the Dornbracht Service Department. Waiting display September 2013 Page 61 of 67

64 If a function has been selected but is not yet ready (e.g. the set temperature), the appropriate symbol will flash. It will stop flashing as soon as the function is ready for use. Waiting display If a function has been selected but is not yet ready (e.g. the set temperature), the appropriate symbol will flash. It will stop flashing as soon as the function is ready for use. Waiting display September 2013 Page 62 of 67

65 If a function has been selected but is not yet ready (e.g. the set temperature), the appropriate symbol will flash. It will stop flashing as soon as the function is ready for use. Maintenance We recommend that you have all the components inspected and serviced by your plumber once per year. This maintenance will also include cleaning, checking for leaks, checking the functions and uploading the latest software version. A maintenance contract with an authorised plumber will ensure that your system is inspected regularly. Safety deactivation A safety deactivation system ensures that all active functions are switched off automatically after 30 minutes at the most September 2013 Page 63 of 67

66 Disposal All electronic elements are marked in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This Directive provides the framework for the return and recycling of end of life products throughout the EU. In addition to valuable recyclable materials, end of life electrical and electronic appliances also contain harmful substances. These can be harmful to human health and the environment if they are disposed of in the residual non-recyclable waste or if they are not treated correctly. You should therefore never dispose of your waste appliance as non-recyclable waste. Instead, use the collection point established by your local authority to return and recycle electrical and elec- tronic waste. Ensure that you comply with the current regulations in this respect. You must also comply with other national regulations which apply. Disposal All electronic elements are marked in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This Directive provides the framework for the return and recycling of end of life products throughout the EU. In addition to valuable recyclable materials, end of life electrical and electronic appliances also contain harmful substances. These can be harmful to human health and the environment if they are disposed of in the residual non-recyclable waste or if they are not treated correctly. You should therefore never dispose of your waste appliance as non-recyclable waste. Instead, use the collection point established by your local authority to return and recycle electrical and elec- tronic waste. Ensure that you comply with the current regulations in this respect. You must also comply with other national regulations which apply September 2013 Page 64 of 67

67 If you have any questions, contact the Dornbracht branch nearest you: Aloys F. Dornbracht GmbH & Co KG Armaturenfabrik Köbbingser Mühle Iserlohn Tel. +49(0) , Fax +49(0) mail@dornbracht.de, September 2013 Page 65 of 67

Dornbracht Sensory Sky. Manual. Culturing Life. 43 Cleaning. 24 Display button. 44 Safety deactivation. 25 Rotary knob. 23 Safety information

Dornbracht Sensory Sky. Manual. Culturing Life. 43 Cleaning. 24 Display button. 44 Safety deactivation. 25 Rotary knob. 23 Safety information Dornbracht Sensory Sky Manual 24 Display button 25 Rotary knob 33 Temperature adjustment 34 Individual configuration 35 Resetting all outlet points 32 Volume adjustment 28 Waiting display 29 On/Off 38