Mobile Dust Extractors. Mobile Dust Extractors

Transcription

1

2

3 Mobile Dust Extractors Mobile Dust Extractors 113

4 Mobile Dust Extractors Dust Extractor System Type of work Chipper Reciprocating Saw Diamond saw Hammer Drill Small die grinders Circular saw Depressed centre disc Ø5 /125 Ø1.5 x15 Ø38 x 5m DC 1800 DC 2900c DC 2900a DC 2800 H Asbestos A Ø1.5 x 6 +Ø2 x15 Ø38x2m+Ø50x5m DC 3800c turbo DC 3800i DC 3900a DC 3900c DC 3800 TR S DC 3800 Stationary DC 3900c Twin DC 3800c Twin turbo Cutting disc Ø5 /125 Wall grinder Ø5 /125 Sanding disc Ø5 /125 Orbital sander Cleaning Ø1.5 /38 General cleaning Welding, small extraction point Ø1.5 x 6 +Ø2 X15 Ø38x2m+Ø50x5m DC 5900c/a 4 kw/ptfe/ HP DC 5800 TR DC 11-Module 5.5 kw/ HP Depressed centre Descaling tool disc Ø7 & 9 /230 Straight grinder Cutting disc Ø7 & 9 /230 Circular saw Chasing disc 2 x Ø6 /150 Reciprocating Saw Chipping tool Cleaning Ø2 /50 Floor grinding Ø16 20 / Ø1.5 x 6 +Ø2 x15 Ø38x2m+Ø50x5m Ø2 x80 Ø50x25m DC 3800c turbo DC 3800i DC 3900a DC 3900c DC 3800 TR S DC 3800 Stationary DC 3900c Twin DC 3800c Twin turbo B Ø2 x 0 Ø50x30m DC 5900c/a 4 kw/ptfe/ HP DC 5800 TR DC 11-Module 5.5 kw/ HP 114

5 Mobile Dust Extractors Floor grinding more Grinding disc Ø12 /300 than Ø 20 /500 Brick saw Ø16 /400 Depressed centre Suction lance Ø3 /76 disc Ø12 /300 Cleaning Ø2 /50 Cutting disc Ø12 /300 Concrete mill ing tool Ø2 x50 +Ø3 x165 Ø50x15m+Ø76x50m C DC 5900c/a 4 kw/ptfe/ HP DC 5800 TR DC 11-Module 5.5 kw/ HP Ø2 x25 Ø50x7.5m + Preseparator Ø3 x165 Ø76x50m + Preseparator DC 5900c 9.2 kw/15 HP S Suction Lance Ø3 76 D Ø3 x 25 Ø76x7.5m + Preseparator DC 5900c 9.2 kw/15 HP S Wet vac E Ø38 5 m DC 50, 75 - W Type of work System Dust Extractor 115

6 116 Mobile Dust Extractors

7 Mobile Dust Extractors Dust Extractor Selection Advice 1. Capacity/Weight Check the capacity of the unit in relation to its weight and portability. The motor power does not determine capacity, but rather air flow and vacuum generation (cfm/m 3 /h x inwg/kpa) available to the operator (normally at inwg/-20 kpa). (The lower the unit weight for comparable capacity, the easier the unit will be to move and use.) 2. Material Handling Dust, bulky materials, chips and strips can be collected and transported with vacuum. When the material volume is large, efficient handling saves time and money. Ergonomic handling of the unit and the collected material is also import ant. The system design should minimize the possibility of dust contamination during collection bag and filter changes. The dust collected in the system should be contained during these activities. 3. Sound Level Even in environments where the sound level is not considered harmful, remember that each additional source increases the overall level. Compare the sound level rating of the unit with measurements from the subject environ ment. To have a zero net gain, the sound level of the unit should be at least 5 db(a) below the ambient level. 4. Filtration Choose the filtration system so the unit does not lose capacity after several minutes of use. Dustcontrol dust extractors separate the dust in three inter-related steps: 1. Separation of coarse material in the cyclone A good quality cyclone has the right characteristics relative to thecapacity of the vacuum producer. Generally, the longer the cyclone, the better. 2. Fine filtration The fine filter protects the HEPA filter and has a lower replacement cost. To extend the life of the HEPA filter, Dustcontrol recommends that you replace the fine filter frequently. A conical pleated filter cartridge achieves the highest air to cloth ratio of any filter design on the market. The machine should also have a filter condition indicator and an effective filter cleaning system. For some applications, such as concrete floor grinding, you may require a PTFE or Teflon coated fine filter. 3. HEPA filtration Do not compromise your health, very close to 0 % filter efficiency is achievable. When the air is exhausted back into the working environment, a HEPA H13 filter is highly recommended. If elimination of hazardous dust is the target, then why release respirable dust back into the working environment? 5. Suction Casings Dustcontrol developed the source extraction concept 35 years ago! Source extraction is the most effective method for maintaining a clean working environment. A Dustcontrol suction casing captures dust or fume directly at the point of generation. Practically all popular hand power tools can be equipped with a suction casing. Recently, some machine manufacturers have integrated their own suction casings. With Dustcontrol s connecting sleeves, part nos. 29 (1 /25mm), 2132 (1.25 /32mm) or 2114 (1.5 /38mm), they can connect to Dustcontrol dust extractors. Enjoy dust-free operation of your hand held tools by upgrading to a Dustcontrol dust extractor. 6. Applications Concrete Dust Tough applications, such as concrete grinding, demand a lot from a dust extractor and filter. Since there are high volumes of very fine particulate, you may need a PTFE filter or Teflon treated filter. A preseparator is also recommended for large floor grinding machines. The DC 3800 Twin with Teflon filter or the DC5800 with PTFE filter are the most suitable dust extractors for this type of work. Fluids All Dustcontrol s dust extractors can be used for vacuuming nonflammable liquids in small quantities. However, Dustcontrol also offers a dedicated liquid extractor for larger quantities such as concrete coring. Metal Chip/Swarf A steel container is preferred when vacuuming sharp items such as metal chips. All dust extractors can be ordered with a steel container. Hazardous Materials Special precautions must be taken when dealing with hazardous materials such as silica dust and PCB (health hazardous chemicals). First, a machine with at least a HEPA H13 filter is a must. Second, suction casings are needed for your tools to avoid hazardous dust becoming airborne. Third, an additional air-cleaner is required to clean the air in your working environment. Finally, protect yourself with mask, eye-wear, and protective clothing. Explosive Environments Not only liquids or gases can be explosive. Also very fine dust particles mixed with air can be explosive. A tiny spark from a static discharge or a mechanical spark can set off an explosion inside a dust extractor. NFPA 68 as well as other NFPA regulations stipulate certain arrangements, configurations and measures for design of a dust extraction or vacuum cleaning system intended for use with an explosive dust. Dustcontrol can design your system for compliance and foremost, safe operation with respect to these engineering guidlines. 7. The Right Size Two things determine the most suitable dust extractor required for a given application: First, the size of the suction casing/nozzle, combined with the type of operation, determines the required airflow. In turn this influences the choice of a suitable dust extractor, taking into account the filter area and the dimension of the inlet. Second, the longer the hose and tubing-runs, the greater the pressure drop in the system will be. Greater pressure generation is required from the dust extractor when handling large quantities of material (heavy cleaning, suction lance etc.) 117

8 Mobile Dust Extractors Classification of dust extractors and HEPA filters Dust extractors are used to improve the working environment and to reduce levels of hazardous dust to a minimum. For these reasons it is very critical to have an efficient separation of fine dust in the filter system. In our dust extractors we always operate with a fine filter that will separate the largest amount of dust. But to also capture almost 0 % of the finest - and most dangerous - particles, we always finish off the design with a HEPA H13 filter. To guarantee that the filter complies with relevant environment regulations, some common standards are used. They are described in the following. Test methods The test methods of current standards for dust extractors and filters are always based on particle counting. By injecting particles before the filter and by monitoring the concentration before and after the filter, the penetration can be calculated (a penetration of 0.1 % is equal to a degree of separation of 99.9 %). The test is executed in several steps by individually examining the filter media, the complete filter cartridge and in some cases, also the complete unit. HEPA filters - High Efficiency Particulate Air filters In the classification of HEPA filters, Dustcontrol uses the strict HEPA standard (EN 1822:2009). It is divided into different levels (E to H14) depending on filtration efficiency. Dustcontrol applies level H13 which can separate up to % of the particles, with a particle size between 0.15 to 0.30 μm. This particle size is used because it is the hardest to separate - both larger and smaller particles are easier to capture in a filter. The test according to IEC consists of two parts. 1. Test of filter system (in our case a fine filter and a HEPA H13 filter). To achieve category H at a separation degree of %, 90 % of the test particles must be smaller than 1.0 μm. Our fine filters comply with category M and our HEPA H13 filters with category H. 2. Test of assembled unit - in our case this applies to a complete dust extractor. Here it also requires % efficiency, however % of the particles must be smaller than 1.0 μm, 22 % smaller then 2.0 μm and 75 % smaller than 5.0 μm. The filter systems of Dustcontrol dust extractors are built to comply with the tough IEC machine classification H. Comparing notes A strand of human hair is approx. 0 μm in diameter. Particles smaller than μm are not visible by the naked eye. A particle of tobacco smoke is on average 0.01 to 1.00 μm. Most bacteria are between 0.35 to.0 μm. Almost all viruses are smaller than 0.03 μm. (μm = micron) Dust extractors In IEC (EN ) dust extractors are classified into three categories L for low, M for medium and H for high where the H category is the most severe (Note! do not confuse this H with that in HEPA H13). The category required for a specific application is decided on the basis of the permitted maximum concentration for working places (MAK) for that type of dust. The filter mounting system makes it possible to place a containment bag over the unit during filter changes to minimise the potential for dust release. Dustcontrol uses conical pleated filters in all extraction units. A pleated filter has a very large area in relation to it s physical size. The extraction units can therefore be compact in relation to the filter area they contain. Only original Dustcontrol filters are tested and approved. Use of non-original spare parts will void the Dustcontrol warranty and dust leaks could occur which may be hazardous to the employee s health. The filters are certified according to current European requirements for dust extraction. This assures that with correct handling, an optimum filtration is achieved. Follow the instructions concerning the handling of filters so that they can be changed without exposure to hazardous dust. 118

9 Mobile Dust Extractors Classification of our dust extractors NAME STANDARD CLASSIFICATION EFFICIENCY PARTICLE SIZE EXAMPLE MAK DESIGNATION (Max. Concentration for Workplace) IEC* standard IEC L = > 99 % > 1.0 mg/m 3 M = > 99.9 % > 0.1 mg/m μm** H = % H = > % < 0.1 mg/m 3 and carcinogenic substances H asbestos = > % < 0.1 mg/m 3 and carcinogenic substances incl asbestos * IEC: International Electrotechnical Commission ** Part 1: 90 % < 1.0 μm Part 2: % < 1.0 μm 22 % < 2.0 μm 75 % < 5.0 μm Classification of HEPA filters - according to EN 1822:1998 NAME STANDARD DESIGNATION CLASSIFICATION EFFICIENCY PARTICLE SIZE EXAMPLE E 85 % E11 95 % EN E % HEPA* H % MPPS**** between μm HEPA H13 = % DOP** US IAW MIL-STD 282, 1956)*** % 0.30 μm DOP % * High Efficiency Particle Air filter, ** DOP: Dioctyl Phthalate, *** IAW: The Indications, Analysis, and Warnings Program, **** Most Penetrating Particle Size * IEC: International Electrotechnical Commission **Part 1: 90 % < 1.0 μm Part 2: % < 1.0 μm 22 % < 2.0 μm 75 % < 5.0 μm 119

10 Mobile Dust Extractors Single-Phase Dust Extractors All the single-phase dust extractors in this chapter are equipped with a fine filter and a HEPA filter (H 13). Filter cleaning is achieved with a reverse air pulse cleaning system which is very effective, done without release of collected dust and the unit does not need to be disassembled. The filter system also allows for ergonomic and dust-free filter changes. DC 1800 eco no light-weight but only kg/22 lbs! The DC 1800 is suitable for general cleaning and source extraction from handheld power tools (with up to 5 suction casings) and small table saws. The DC 1800 is small, lightweight and ideal for those that need a highly portable machine that is powerful enough for source extraction. With its low weight, it is easy to carry onto the job site and can be easily stored or rolled under a workbench. The sturdy construction is perfect for the demands of the construction and machine rental industry, but also for anyone that needs a light yet powerful dust extractor. The DC 1800 is equipped with a steel container and a plastic bag is used inside the container. DC 1800 eco Autostart: Connect the subject electric tool to the electrical outlet on unit. Set the selector switch to the AUTO position. The unit will start automatically when the subject tool is started. Part No V/50 Hz Part No V/50 Hz Auto start Part No W, eco, CH Part No V/50 Hz, UK Part No V/50 Hz, UK Part No V/60 Hz, US/CAN Part No 1880 eco XL, 230 V, EU Part No 1881 eco XL, 230 V, Auto start, EU A highly portable machine, powerful enough for source extraction and effective vacuum cleaning. DC 1800 eco The DC 1800 is delivered with the following: Suction hose (Ø 38) 5 m (Part No 25) Aluminium floor tool B 370,1.5 /38 mm (Part No 7235) Chrome steel wand Ø 1.5 /38 mm (Part No 7257) Plastic sacks (Part No 42291) Basket for plastic sack (Part No 42369) Fine filter, cellulose (Part No 42029) HEPA H13 filter (Part No 42027) TECHNICAL DATA DC 1800 eco Weight,lbs/kg 22/ Max Q, cfm/m 3 /h 114/190 Max vacuum, inwg/kpa 115/230 V 84/21/24 Power consumption max 115/230 V 1200/1340/1285 W 68 db(a) Antistatic The DC 1800 Antistatic is delivered with the following hose set: Antistatic hose set Ø 1.5 /38 mm x 15 / 5 m (Part Nos ) 120

11 Mobile Dust Extractors DC 2900 A shiny improvement The DC 2900 is our most popular dust extractor. It is suitable for vacuum cleaning and source extraction from handheld power tools (with up to 5 suction casings) and small table saws. The DC 2900 has a sturdy steel chassis with big wheels, but is still lightweight and portable.the DC 2900 can be ordered with a plastic bag (DC 2900c) or with a steel container (DC 2900a). Collection in a steel container makes the DC 2900a ideal for use with sharp items such as metal chips. DC 2900 Autostart: Connect the subject electric tool to the electrical outlet on unit. Set the selector switch to the AUTO position. The unit will start automatically when the subject tool is started. DC 2800H ENT: Based on the DC 2900a and has a switch letting the user to choose the level of air flow at which a warning signal shall be given. DC 2900a The DC 2900a is delivered with the following: Antistatic hose set Ø 1.5 /38 mm x15 /5m (Part Nos ) Aluminium floor tool B370 Ø1.5 / 38 mm (Part No 7235) Chrome steel wand Ø1.5 /38 mm (Part No 7257) Container.5 gal./40l (Part No 40070) Fine filter, polyester (Part No 42028) HEPA H13 filter (Part No 42027) DC 2900a Eco (with barrel) Part No V/50 Hz Part No V/50 Hz, UK Part No V, CH Part No V/50 Hz, UK Part No V/60 Hz, US/CAN Part No V/50 Hz, Auto start Part No V/50 Hz, Auto start,uk DC 2900c Eco(with sack) Part No V/50 Hz Part No V/50 Hz, UK Part No V, CH Part No V/50 Hz, UK Part No V/60 Hz, US/CAN Part No V/50 Hz, Auto start Part No V/50 Hz, Auto start,uk DC 2800H ENT Part No V/50 Hz TECHNICAL DATA DC 2900a Weight, lbs/kg 42/19 Max Q, cfm/m 3 /h 114/190 Max vacuum, inwg/kpa 115/230 V 84/21/24 Power consumption max115/230 V 1340/1285 W 68 db(a) DC 2800H ENT See DC 2900a DC 2900c The DC 2900c is delivered with the following: Suction hose (Ø 38) 5 m (Part No 25) Aluminium floor tool B 370 Ø1.5 /38mm (Part No 7235) Chrome steel wand Ø 1.5 /38 mm (Part No 7257) Intellibag (Part No 42702) Fine filter, cellulose (Part No 42029) HEPA H13 filter (Part No 42027) Antistatic DC 2900c The DC 2900c Antistatic is delivered with the following hose set: Antistatic hose set Ø 1.5 /38 mm x 15 /5m (Part Nos ) TECHNICAL DATA DC 2900c Weight, lbs/kg 31/14 Max Q, cfm/m 3 /h 114/190 Max vacuum, inwg/kpa 115/230 V 84/21/24 Power consumption max115/230 V 1340/1285 W 68 db(a) DC 2900a DC 2900c 121

12 Mobile Dust Extractors DC 2800 H Asbestos DC 2800 H Asbestos Safe asbestos removal The DC 2800 H Asbestos meets the highest demands in some countries and is certified by IFA. Asbestos is a hazardous material that should be removed with caution. The dust extractor is equipped with antistatic hose, a plug for the cyclone inlet, special plastic bags and other safety precautions. Don t compromise your health when removing Asbestos! Part No V/50 Hz Part No V/50 Hz, UK Part No V/50 Hz, UK The DC 2800 H Asbestos is delivered with the following: Suction hose (Ø 38), antistatic, 5 m (Part No 2012) Floor nozzle B 370/38 (Part No 7235) Suction pipe Ø 38 (Part No 7257) 5 pcs plastic sacks (Part No 42285) Fine filter Polyester (Part No 42028) HEPA H13 filter(part No 42027) Inlet plug (Part No 42250) TECHNICAL DATA DC 2800 H Asbestos Weight 19 kg Flow at open inlet 190 m 3 /h Neg pressure max, 230 V 21 kpa Power consumption, 230 V W 70 db(a) DC 3800 H Asbestos Big brother for safe asbestos removal The DC 3800 H Asbestos is the big brother of the IFA (formerly BIA/BGIA) certified DC 2800 H Asbestos, and conforms to the stringest safety demands of asbestos sanitation. The dust extractor is equipped with an antistatic hose, a plug for the cyclone inlet and other safety precautions. Even the DC 3800 H Asbestos is certified by IFA for asbestos removal. DC 3800 H Asbestos The DC 3800 H Asbestos is delivered with the following: Suction hose (Ø 50), antistatic, 5 m (Part No 2013) Floor nozzle 500 A-50 (Part No 7238) Suction pipe Ø 50 (Part No 7265) 5 pcs plastic sacks (Part No 42285) Filter, Polyester (Part No 42025) HEPA H13 filter(part No 42024) TECHNICAL DATA DC 3800 H Asbestos Weight 38 kg Flow at open inlet 300 m 3 /h Neg pressure max, 230 V 21 kpa Power consumption, 230 V W 75 db(a) Part No V/50 Hz IFA schadstoffgeprüft pollutant tested 122

13 Mobile Dust Extractors DC 3900 Tough against dust, friendly to the environment Our DC 3900 has been developed with the environment in mind, but without compromising on extraction power and quality. Despite less energy consumption, the motor package is more powerful than before. Enhancements in the production process resulted in an eco-friendly painting process and material choice. The plastic sacks (intelli bag ) are biodegradable. DC 3900 has a robust and adjustable chassis to facilitate the transport. The cyclone is adjustable in two different heights, which makes it possible to equip the machine with both container and plastic sack. The optimized construction simplifies service work, resulting in decreasing costs. The DC 3900 is suitable for all kinds of tasks demanding effective dust extraction, no matter if it is about heavy cleaning on construction sites or source extraction with larger handheld power tools and floor grinding machines. The DC 3900 can be easily adapted to the needs of the customer for tailor-made solutions, thanks to a wide choice of suction casings and other accessories. DC 3900a (with container) Part No V/50 Hz, EU Part No V/60 Hz, USA/CA DC 3900c (with sack) Part No V/50 Hz, EU Part No V/50 Hz, UK Part No V/60 Hz, USA/CA Part No V/50 Hz, UK DC 3900L (with longopac) Part No V, eco, EU Part No V, eco, UK Part No V, eco, UK Part No V, eco, US Part No V, eco, CAN eco DESIGN + intelli bag DC 3900a/L The DC 3900a is delivered with the following: Antistatic hose set Ø 2 /50 mm x 15 /5m. (Part Nos ) Aluminium floor tool B500 Ø2 / 50 mm, (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) Container.5 gal/40l (Part No Fine filter, polyester (Part No 42025) HEPA H13 filter (Part No 42024) TECHNICAL DATA DC 3900a/L Weight, lbs/kg 84/38 Max Q, cfm/m 3 /h 188/320 Max vacuum, inwg/kpa 230 V 84/25 Power consumption max 230 V W 69 db(a) DC 3900c/L The DC 3900c/L is delivered as standard with the following: Suction hose 5 m, Ø 50 (Part No ) Aluminium floor tool B500 Ø2 / 50 mm (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) DC 3900c; Intellibag, 5 pcs (Part No 43619) Fine filter, polyester (Part No 42025), HEPA H13 filter (Part No 42024) longopac, 20 m (Part No ) TECHNICAL DATA DC 3900c/L Weight, lbs/kg 77/35 Max Q, cfm/m 3 /h 188/320 Max vacuum, inwg/kpa 230 V 84/25 Power consumption max 230 V W Power consumption max 115 V UK W Power consumption max 115 V US 2 0 W 69 db(a) DC 3900a/L DC 3900c/L 123

14 Mobile Dust Extractors DC 3900c Twin eco With integrated pre-separator The DC 3900c Twin is a portable but very powerful dust extractor suitable for large quantities of dust due to its integrated pre-separator. It is particularly suitable for concrete grinding since 80 90% of the coarse materials are separated in the pre-separator. The remaining dust goes into the filter cyclone. The 3900c Twin is a popular machine since it is powerful enough for most applications yet it can be easily moved and transported. The air flow capacity is suitable for concrete floor grinding machines with diamond discs of up to 500 mm/20 diameter. DC 3900c Twin eco Part No , 230 V/50 Hz Part No , 115 V/50 Hz, UK Part No , 230 V/50 Hz, CH DC 3900Twin L eco (with longopac) Part No , 230 V/50 Hz, EU Part No , 230 V/50 Hz,CH DC 3900c/L Twin eco The DC 3900c Twin eco is delivered as standard with the following: Antistatic hose set Ø 2 /50 mm x 25 / 9 m (Part Nos 2013, 2129, 27) Aluminium floor tool B500 (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) Plastic sacks (Part No 43619) Fine filter, polyester (Part No 42025) HEPA H13 filter (Part No 42024) TECHNICAL DATA DC 3900c/L Twin eco Weight, lbs/kg 119/54 Max Q, cfm/m 3 /h 115/230 V 135/ /320 Max vacuum, kpa 115/230 V 24/25 Power consumption max 115/230 V 2700 W/ 2600 W 115/230 V 69 db(a) 124

15 Mobile Dust Extractors DC 3800 Wood shavings extractor The DC 3800 Wood dust separator is suitable for extract wood chips and for source extraction from carpentry machines where there is reguirement of continues operation and high degree of separation. The DC 3800 Wood Shavings Extractor is a robust mobile machine that is very easy to move, eg. it fits easily through standard doors. It is also very service friendly. Part No V/50 Hz Part No 2173 Hose set DC 3800 Wood shavings extractor The DC 3800 Wood dust separator is delivered as standard with the following: Antistatic hose set 23 /7.5m Ø 2 / 50 mm (Part No 2013, 2129, 27) Aluminium floor nozzle B500 Ø 2 /50 mm (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) Plastic sacks (Part No 4714) Fine filter, polyester (Part No 42025) HEPA H13 filter (Part No TECHNICAL DATA DC 3800 Wood shavings extractor Weight, lbs/kg 82/37 Max Q, cfm/m 3 /h 192/320 Max vacuum, inwg/kpa 24 Motor Nameplate W Container 90 l 70 db(a) DC 4000 PCB - meet the demands for PCB decontamination The DC 4000 PCB is developed to meet the demands for PCB decontamination. According to professional standards in Sweden, the vacuum cleaner must have an airflow 370 m 3 /h and three-stage separation with a HEPA filter class H13, when decontaminating PCB. The DC 4000 PCB produce 400 m 3 /h and removes dust in three stages. The first separation occurs in the unit s cyclone, which is a very efficient separation of all the coarser dust. The finer dust is separated in the unit s filter cartridges, and then the HEPA 13 filter takes care of the rest of the dust. Filter cleaning by reverse airpulse provides long filter life on the fine filter and constant capacity. Always use a dust collection nozzle connected to the vacuum cleaner and the removal tools used during the decontaminationprocedure. To achieve the best efficiency: capture directly at the source. We manufacture suction casings to the most frequent tools. Part No V/50 Hz, 2.8 kw DC 4000 PCB The DC 4000c PCB is delivered as standard with the following: Antistatic hose set 23 /7.5m Ø 2 / 50 mm (Part No 2013, 21) Aluminium floor nozzle B500 Ø 2 /50 mm. (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) Plastic sacks (Part No 42285) Fine filter, polyester (Part No 42025A) HEPA H13 filter (Part No 42024) TECHNICAL DATA DC 4000 PCB Weight, lbs/kg 126/57 Max Q, cfm/m 3 /h 240/400 Max vacuum, inwg/kpa (115/230 V) 84/21/24 Motor Nameplate (115/230 V) 2.8 kw (115/230 V) 70 db(a) 125

16 Mobile Dust Extractors Capacity p (kpa) 40 1 DC DC 2900a DC 2900c DC 2800 H Asbestos DC 3900a/L DC 3900c/L DC 3900c/L Twin DC 3800 Wood shavings extractor DC 3800 H Asbestos DC 4000 PCB W 1400 W 20 W 2800 W /0 120/ / / / / /70 480/800 Q cfm/m 3 /h TECHNICAL DATA DC 1800 DC 2900a/c DC 2800 H Asbest H x W x L, in/cm 30 x 15 x 15/74 x 38 x x 18 x 24/114 x 44 x x 17 x 21/7 x 42 x x 17 x 22/ 6 x 44 x 55 DC 3800 H Asbest 54 x 24 x 28/ 138 x 60 x 70 DC 3900a/c/L /122 x 60 x 75 DC 3900c/L Twin 48 x 24 x 30/122 x 60 x 75 DC 3800 Wood shavings extractor 14.8 x 24 x 28/37.5 x 60 x 70 DC 4000 PCB 58 x 26 x 28/145 x 65 x 70 Weight 22 lbs/ kg 42/31 lbs/19/14 kg 42 lbs/19 kg 84 lbs/38 kg 84/77 lbs/38/35 kg 119 lbs/54 kg 81.6 lbs/37 kg 126 lbs/57 kg Inlet, (nom.) Ø 2 /50 mm Ø 2 /50 mm Ø 2 /50 mm Ø 2 /50 mm Ø 2 /50 mm Ø 2 /50 mm Ø 2 /50 mm Ø 3 /76 mm Hose length max recommended 15 /5 m (Ø 1.5 /38 mm) 15 /5 m (Ø 1.5 /38 mm) 15 /5 m (Ø 1.5 /38 mm) 15 /5 m (Ø 1.5 /38 mm) 16.4/5 m (Ø 2 /50 mm) 15 /5 m (Ø 2 /50 mm) 15 /5 m (Ø 2 /50 mm) /5 - m (Ø 3 /76 mm) Max flow, cfm/m 3 /h 115/230 V 114/ / / / / / / / /400 Max vacuum, inwg/kpa 115/230 V 84/21/24 84/21/24 84/24 kpa 84/21 kpa 84/25 84/24/25 84/24 84/21/24 Motor power/nameplate 115/230 V AUTO: Power consumtion connected tool */ min 200 W - max 1500 W 1 340/1 285 W 1 340/1 285 W 1285 W W W (230 V) W (115 V UK) 2 0 W (115 V US) 230 V/ A W W V/16 A W W V/20 A W W W/2 600 W 2 0 W/2 800 W 2 0 W/2 800 W Fine Filter area, ft 2 /m / / / / / / / /3.6 Filtration Efficiency, Fine Filter EN , Class M 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % HEPA Filter area, ft 2 /m 2 9.2/ / / / / / /3 Filtration Efficiency HEPA Filter EN HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 EN , Class H % % % % % % % % Collection container/sack 4 gal/15 l.5 gal/40 l(a)/5 gal/20 l(c).5 gal/40 l.5 gal/40 l.5 gal/40 l 2 x.5 gal/2 x 40 l 23.8 gal/90 l.5 gal/40 l(a)/5 gal/20 l(c) Sound Level 115/230 V 68 db(a) 68 db(a) 70 db(a 75 db(a) 69 db(a) 69 db(a) 70 db(a) 70 db(a */Always check with local regulations. 126

17 Mobile Dust Extractors Three-Phase Dust Extractors Our three-phase machines are used for heavy materials where higher vacuum generation is required. The vacuum producer is a turbo pump, directly driven by a three-phase motor. Our dependable turbo pump units have minimal service requirements and long service life. The performance characteristic of the turbo pump is well suited for heavy cleaning and material transportation. The turbo pump generates more vacuum as the resistance increases. DC 3800c Turbo The professional dust extractor for continous operation The DC 3800c Turbo is a medium sized dust extractor that has a tall cyclone and a three-phase motor. This dust extractor is suitable for longer hoses (up to 65 /20 m), heavy cleaning (1.5 /38 mm accessories) and for source extraction from medium sized power tools such as grinders, jack hammers, and saws. Thanks to the tall cyclone, large filters and powerful motor package, it can handle large amounts of debris. Suitable casings are: sanding, grinding and diamond disc casings up to 9 /225 mm as well as rubber suction bellows for chisel hammers, drills and de-scaling hammer. (Part Nos 6078 & 6130). Part No 13156A06K0 400 V/50 Hz, 2.2 kw Part No 13156P06J0 230/460 V/60 Hz, 4 hp US/CAN Part No 13156G06J0 600 V/60 Hz, 4 hp CAN DC 3800c Turbo The DC 3800c Turbo is delivered as standard with the following: 13156A06K0 ; Hose set total 7 m (5 m Ø 50 and 2 m Ø 38) (Part No 2125) 13156P06J0, 13156G06J0; Antistatic hose set total 23 /7 m (Ø 1.5 x 6 + Ø 2 x17 / Ø 38 mm x 2 m + Ø 50 mm x 5 m) (Part No 2126) Aluminium floor tool B450, Ø 1.5 /38 mm (Part No 7236) Chrome steel wand Ø1.5 /38 mm (Part No 7257) 5 plastic sacks (Part No 4314) Fine filter, polyester (Part No 42025) HEPA H13 filter (Part Nr 42024) TECHNICAL DATA DC 3800c Turbo Weight, lbs/kg 137/62 Max Q, cfm/m 3 /h 156/260 Max vacuum, inwg/kpa 120/30 Motor Nameplate 2.2 kw/ 4 HP 75 db(a) A well balanced machine for very easy handling 127

18 Mobile Dust Extractors DC 3800c Twin Turbo 3-phase dependability in a portable package The DC 3800c Twin Turbo is a portable but very powerful dust extractor suitable for large quantities of dust due to its integrated pre-separator. It is particularly suitable for long hoses (up to 65 /20 m) and heavy concrete grinding. Up to 80-90% of the coarse material is separated in the preseparator and the remaining dust enters the filter cyclone. Part No 13D56A06G0 400 V/50 Hz, 2,2 kw Part No 13D5BC06G0 230/460 V/60 Hz, 4 hp US/CAN Part No 13D5BG06G0 600 V/60 Hz, 4 hp CAN DC 5900 A powerful dust extractor All DC 5900 s are very powerful and dependable portable dust extractors. These units are built on a robust and sturdy steel chassis for maximum durability on construction sites. With a direct driven three-phase turbo pump, the DC 5800/5900 is suitable for continuous operation, heavy material transport, source extraction and cleaning. The DC 5800/5900 will give sufficient airflow for several users at the same time and it can also be used as a semi-mobile central unit on a tubing system. It is suitable for source extraction with grinding disks up to 30 /750 mm in diameter. DC 5900a/c 4 kw/ hp Get rid of large quantites of dust The standard DC 5900c 4 kw/ hp is used for big hand held power tools and heavy duty cleaning on construction sites. The dust extractor is suitable for two smaller handheld power tools or one larger tool, such as a floor grinder, with a disk of up to 30 /750 mm. The DC 5900a 4 kw/ hp is similar to the DC 5900c 4 kw/ hp except that it is equipped with a steel container. DC 5900a Part No V/50 Hz, 4 kw Part No V/60 Hz, hp USA/CAN Part No V/60 Hz, hp CAN Part No V/60 Hz, 15 hp CAN Part No V/60 Hz, 15 hp P CAN DC 5900c Part No V/50 Hz, 4 kw Part No V/60 Hz, hp USA/CAN Part No V/60 Hz, hp CAN Part No V/60 Hz, 15 hp CAN Part No V/60 Hz, 15 hp P CAN DC 5900L Part No V/50 Hz, 4 kw DC 3800c Twin Turbo The DC 3800c Twin and the DC 3800c Twin Turbo is delivered as standard with the following: Antistatic hose set 23 /7,5m Ø 2 / 50 mm (Part Nos 2013, 2129, 27) Aluminium floor nozzle B500 Ø 2 /50 mm. (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) Plastic sacks (Part No 4314) Fine filter, polyester (Part No 42025) HEPA H13 filter (Part No 42024) TECHNICAL DATA DC 3800c Twin Turbo Weight, lbs/kg 179/81 Max Q, cfm/m 3 /h 156 /260 Max vacuum, inwg/kpa (115/230 V) 120/30 Motor Nameplate (115/230 V) 4 hp/2.2 kw (115/230 V) 75 db(a) DC 5900a The DC 5900a 4 kw/ hp is delivered as standard with the following: Antistatic hose set 23 /7 m Ø 2 /50 mm (Part Nos ) Aluminium floor tool B500 Ø 2 / 50 mm (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) HEPA H13 filter (Part No 42869) Fine filter polyester(part No ) DC 5900c The DC 5900c 4 kw ( hp) is delivered as standard with the following: 4 kw: 7.5 m suction hose Ø 50 (Part No ) HP: Antistatic hose set 23 /7 m Ø 2 /50 mm (Part No ) Aluminium floor tool B500 Ø 2 / 50 mm (Part No 7238) Chrome steel wand Ø 2 /50 mm (Part No 7265) Intellibag (Part no 46145) HEPA H13 filter (Part No 42869) Fine filter polyester (Part No ) TECHNICAL DATA DC 5900a/c Weight, lbs/kg ca 375/170 Max Q, cfm/m 3 /h 285/475 Max vacuum, inwg/kpa 0/28 Motor Nameplate hp/4 kw 75 db(a) 128

19 Mobile Dust Extractors DC kw Frequency converter Part No V/50 Hz, 7.5 kw - DC 5900 DC 5900a/c 9.2 kw P Ideal for semi-mobile systems with many extraction points The DC 5900a/c 9.2 kw P generates an extremely large amount of air flow and is therefore optimal for many extraction points. It is generally used in semi-mobile extraction systems where the machine is conveniently placed in a central location and connected to a hose or tubing system. Maximum efficiency is maintained with up to four simultaneous users. Part No V/50 Hz, 9.2 kw - DC 5900c Part No V/50 Hz, 9.2 kw - DC 5900a Part No V/50 Hz, 9.2 kw - DC 5900L DC 5900a/c 9.2 kw P The DC 5900a/c 9.2 kw P is delivered as standard with the following: Intellibag (Part No 46145) HEPA H13 filter (Part No 42807) Fine filter, polyester (Part No 4292) DC 5900a/c 9.2 kw S A choice for heavy duty cleaning and material transportation The DC 5900a/c 9.2 kw S has a large amount of air flow. It can also be used for source extraction and cleaning when extremely long hoses are needed, up to 50 m. The machine has also a cooling air inlet to prevent the pump from overheating when used intensively. Part No V/50 Hz, 9.2 kw - DC 5900c Part No V/50 Hz, 9.2 kw - DC 5900a DC 5900a/c 9.2 kw S The DC 5900a/c 9.2 kw S is delivered as standard with the following: Intellibag (Part No 46145) HEPA H13 filter (Part No 42807) Fine filter, polyester (Part No ) 129

20 Mobile Dust Extractors DC 5900 PTFE Perfect for concrete grinding The DC 5900 PTFE is a joint development project together with a market leading concrete floor grinding machine manufacturer. It is especially suited to managing the large volumes of concrete dust generated during floor grinding. The machine is equipped with a pleated PTFE filter cartridge (Teflon filter) with a large filter area (54 ft 2 /5 m 2 ) to maximize airflow. The PTFE material reduces the tendancy of the fine dust to adhere to the filter. As a result, it allows continuous operation of today s highly efficient concrete floor grinders. Floor grinding is definitely one of the toughest applications for a construction dust extractor. This means that high demands are made on the filters and the equipment used to collect the dust. The DC 5900a PTFE and DC 5900c PTFE models provide optimal performance with concrete grinding discs of up to 40 /00 mm. The DC 5900a is equipped with a 20 gal/75 l steel container, while the DC 5900c PTFE has a plastic sack. Dustcontrol strongly recommends the use of a pre-separator for maximum efficiency in floor grinding applications Part No DC 5900a PTFE 400 V/50 Hz, 4 kw* Part No DC 5900c PTFE 400 V/50 Hz, 4 kw** Part No DC 5900c PTFE 400 V/50 Hz, 9.2 kw** Part No DC 5900L PTFE 400 V/50 Hz, 9.2 kw Part No DC 5900L PTFE 400 V/50 Hz, 4 kw ** 75 l container, Part No 7368 ** 60 l sack DC 5900a/c PTFE The DC 5900a/c PTFE 4 kw/ HP is delivered as standard with the following: Antistatic hose set 25 /7.5 m Ø 2 / 50 mm (Part Nos ) Aluminium floor tool B500 Ø 2 / 50 mm (Part No 7238 Chrome steel wand Ø 2 /50 mm (Part No 7265) For DC 5900c: Intellibag, (Part No 46145) HEPA H13 filter (Part No 42807) Fine filter polyester PTFE Tefloncoated (Part No ) 130

21 Mobile Dust Extractors Capacity p (kpa) DC 3800c Turbo DC 3800c Twin Turbo DC 5900a/c, 4 kw/ hp DC 5900c, 9.2 kw/15 hp P DC 5900 PTFE DC kw FC DC kw S /0 120/ / / / / / /800 Q cfm/m 3 /h TECHNICAL DATA DC 3800c Turbo DC 3800 Twin Turbo DC 5900a 4 kw/ hp DC 5900c 4 kw/ hp DC 5900c 9.2 kw/ DC 5900 PTFE DC kw DC kw S 15 hp P H x W x L, in/cm 58x24x39/145x60x97 56x2639/140x60x97 76x31x46/194x78x116 76x 31x 46/194x78x116 76x31x 46/194x78x116 76x31x 46/194x78x116 76x31x 46/194x78x116 76x31x 46/194x78x116 Weight, lbs/kg 137/62 179/81 388/ /176 ca 465/2 ca 395/180 ca 465/2 441/200 Inlet, (nom) X 2 /50 mm X 2 /50 mm Ø 3 /76 mm Ø 3 /76 mm Ø 4.25 /8 mm Ø 3 /76 mm Ø 4.25 /8 mm Ø 4.25 /8 mm Max hose rec d, Ø 2 /50 mm /5-15 m /5-20 m 15 0 /5-30 m 15 0 /5-30 m 15 0 /5-30 m 15 0 /5-30 m 15 0 /5-30 m 15 0 /5-30 m Max Q, cfm/ m 3 /h 156/ / / / / / / Hz 295/ / Hz 371/ Hz Max vacuum, inwg/kpa 120/30 120/30 112/28 112/28 96/24 112/28 23 kpa 41 kpa Motor Nameplate 2.2 kw/4 hp 2.2 kw/4 hp 4 kw/ hp 4 kw/ hp 9.2 kw/15 hp 4 kw/ hp 7.5 kw 9.2 kw Fine Filter area, ft 2 /m / / / / / /5 90.4/ /5 Filtration efficiency Fine Filter 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % 99.9 % - EN , Class M Filter area HEPA, ft 2 /m / / / / / / / /3.7 Filtration efficiency HEPA Filter - EN HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 HEPA H13 - EN , Class H % % % % % % % % Collecting Volume.5 gal/40 l 2 x.5 gal/40 l 19.5 gal/75 l 15.5 gal/60 l 15.5 gal/60 l 15.5/19.5 gal/60 l/75 l 15.5 gal/60 l 15.5 gal/60 l (115/230 V) 75/70 db(a) 75 db(a) 75 db(a) 75 db(a) 75 db(a) 75 db(a) 75 db(a) 75 db(a) 131

22 Mobile Dust Extractors DC 5900 Semi Mobile System The DC 5900c can be docked on a temporary or permanent tubing system installed in the work area with flap valve connection points for the users. This diagram shows the concept of the system Ø Ø DC 5900c, 9.2 kw PTFE 70 DC F Mobile 7130 DC F Wheelbarrow 2030 Suction hose Ø Branch pipe Ø8/ Joint Ø Steel pipe Ø Cone Ø8/ Joint Ø Branch pipe Ø76/ Steel pipe Ø Bend 90º Ø End cap Ø Suction hose Ø76 20 Intermediate sleeve Ø76/ Suction hose Ø50 27 Coupling socket Ø50/ Rubber plug Ø Startbox 8177 Electric cable m Electric cable 3 m m 3003 Ø76/ Ø8/ Ø Ø Ø Ø Ø76 DC F Wheelbarrow 2008 Ø76/ Ø50 27 Ø50/ Ø Ø Ø76/50 27 Ø50/ Ø8 / m 2401 Ø50 DC F Mobile DC 5900c DC 5800c 9.2 kw 9.2 PTFE kw P PTFE 2030 Ø8 The hose and branchpipe package consist of: Branch Pipe Package for Semi Mobile System One package is used for each floor. The package does not include electric cables and startbox for vacuum producers without DC Green System (separate purchase). Part No Rubber plug with chain Hose 76 L= Joints 76, remove rubber 3007 * 5D ring 2 Pipes D76* * 5D Spacer D15/8X Screw M6S 6*X55 1 Lock M *5D Branch pipe 45 Ø *5D Flap valve 50/ *6C

23 Mobile Dust Extractors 133

24 Mobile Dust Extractors I-Line Quiet and Powerful In some industrial applications, a portable dust extractor is preferred over a stationary system. In these industrial settings where additional sound can be a detriment or health hazard, a quiet unit is desirable. Dustcontrol s I-line units are best suited as portable indoor vacuum units since the vacuum producer is effectively sound insulated. The I-line dust extractors can be docked to a permanent or temporary tubing system or a separate can be used at each workstation. Ideally these units are used for source extraction with handheld power tools, but can also be used for heavy cleaning, such as metal chips. The vacuum producer is a turbo pump directly driven by a three-phase motor, providing reliability, long life and minimal service requirements. The characteristics of the turbo pump are well suited for heavy cleaning and material transport - the greater the resistance, the more vacuum generated. DC 3800i Silent dust extractor for continous operation The DC 3800i combines central system performance with the flexibility of a portable machine. It is used with Ø 1.5 /38 mm acces sories for heavier applications such as lathes and milling machines that generate large volumes of particles and chips. It is suitable for welding, metal chip, aluminum chips, swarf, material transport and cleaning. Part No 13556A05K0 230/400 V/50 Hz, 2,2 kw Part No /460 V/60 Hz, 4,0 hp USA/CAN Capacity DC 3800i The DC 3800i is delivered with: Part No 13556A05K0: Suction hose 7 m (5 m Ø 50 and 2 m Ø 38, standard) (Part No 2125) Part No : Antistatic hose set total 23 /7 m (Ø 1.5 x 6 + Ø 2 x17 / Ø 38 mm x 2 m + Ø 50 mm x 5 m) (Part Nos ) Aluminium floor tool B 450, Ø1.5 / 38 mm (Part No 7236) Chrome steel wand Ø1.5 /38 mm (Part No 7257) Chrome steel flat nozzle Ø1.5 / 38 mm, L=16 /400 mm (Part No 7213) Suction brush Ø1.5 /Ø38 (Part No 7278) Hand pipe Ø1.5 Ø38 (Part No 7035) Container.5 gal/40 l (Part No 40070) Fine filter, polyester (Part No 42025) p (kpa) 30 1 DC 3800i TECHNICAL DATA DC 3800i /0 120/ /300 Q cfm/ m 3 /h H x W x L, in/cm 59x 27x 44/147x66x1 Weight, lbs/kg 190/86 Inlet, (nom) Ø 2 /50 mm Hose length max reccommended (Ø 2 )/5-30 m (50 mm) Max vacuum, inwg/kpa 120/30 Max Q, cfm/ m 3 /h 156 /260 Motor Nameplate 2.2 kw/4 HP Fine Filter area, ft 2 /m /1.8 Filter efficiency (EN , Class M) 99.9 % Collection container volume.5 gal/ 40 l 60 db(a) 134

25 Mobile Dust Extractors EX-Line The EX-line is specially designed for industries where there is a risk of explosion and also high demands for clean production, such as the wood, food production and electronics industries. The machines fulfil the requirements of the ATEX Zone 22 directive 1999/92 ATEX 137. Cleaning accessories from Dustcontrol are also available to meet this standard. Zone 22 is an area where an explosive environment, created by a combustible airborne substances, does not occur in normal operation or only occurs short-term. These machines are equipped with steel containers, earth-bonded parts and antistatic accessories. The machines for non-conducting material are enclosed to IP54 standard. For conductive material, IP6X standard is valid. The machines are virtually maintenance free, and can extract dust in a vast range of applications, such as source extraction when using power tools for grinding, cutting and drilling applications as well as general cleaning. The machines can be used in environments between 0 and +50 degrees Celsius. DC 1800 EX Ten kilos of pure working joy in ATEX zone 22 The DC 1800 EX is suitable for general cleaning and source extraction. The DC 1800 is small and lightweight and as such suitable for those that need a highly portable machine that still is powerful enough for source extraction. With its low weight it is easy to carry onto the job site and it can be easily stored or rolled under a workbench. The DC 1800 is equipped with a steel container and a plastic bag can be used inside the container. It is equipped with a brushless motor (for spark-free operation) and is certified to IP54 standard (non conductive dust). Part No V Part No V, UK Part No V, UK Part No V, US DC 1800 EX The DC 1800 EX is delivered with the following: Suction hose (Ø 38) 5 m (Part No 2012) Floor nozzle (Part No 7235E) Suction pipe Ø 38 (Part No 7257) Fine filter, polyester (Part No 42028) HEPA H13 filter (Part No 42027) TECHNICAL DATA DC 1800 EX Weight kg Flow at open inlet, 115/230 V 2/185 m 3 /h Neg pressure 115/230 V 30/25 kpa Power consumption 115/230 V 1500/1300 W 70 db(a) 135

26 Mobile Dust Extractors DC 2800 EX The professionals choice in ATEX zone 22 The DC 2800 EX is suitable for vacuum cleaning and source extraction from handheld power tools (with up to 5 suction casings) and small table saws. The DC 2800 has a sturdy steel chassis with big wheels but is still light and portable. The chassis is designed in a manner that allows the unit to be led by the hose without tipping. Compared to DC 1800 EX, it has a slightly longer cyclone, which improves the suction power. The steel container is also bigger. The DC 2800 EX is equipped with a brushless motor (for spark-free operation) and enclosed to IP54 standard (non conductive dust). Part No V/50 Hz Part No V/50 Hz, UK Part No V/50 Hz, UK Part No V/60 Hz, US DC 2800 EX The DC 2800 EX is delivered with the following: Suction hose (Ø 38) 5 m (Part No 2012) Floor nozzle (Part No 7235E) Suction pipe Ø 38 (Part No 7257) Fine filter, polyester (Part No 42028) HEPA H13 filter (Part No 42027) TECHNICAL DATA DC 2800 EX Weight 19 kg Flow at open inlet, 115/230 V 2/185 m 3 /h Neg pressure, 115/230 V 30/25 kpa Power consumption 115/230 V 1500/1300 W 70 db(a) 136

27 Mobile Dust Extractors DC 3800 H Turbo EX The dust extractor for continous operation in ATEX zone 22 The DC 3800 H Turbo EX is a medium sized dust extractor with a high cyclone and a three-phase turbo motor.thanks to the high cyclone, big filters and powerful motor package, it can handle large amounts of particles. Since it is equipped with a powerful three-phase turbo pump it is suitable for long hoses (up to 20 metres) and heavy cleaning (38mm accessories). It is available certified to IP65 standard (conductive dust). Part No 13756A0GD0 400 V, Conductive dust/non conductive Part No V/60 Hz, 4 hp, Conductive dust IP65 DC 3800 H Turbo EX The DC 3800 H Turbo EX is delivered as standard with the following: Suction hose 7.4 m (Part No 2012 Ø 38, 2 m, 2013 Ø 50, 5.4 m) Floor nozzle (Part No 7236e) Suction pipe Ø 50 (Part No 7257) Fine filter, Polyester (Part No 42398) HEPA H13 filter, Polyester (Part No 42024) Cable length 7 m Connector CEE plug 5 pol 16 A IP67 TECHNICAL DATA DC 3800 H Turbo EX Weight 70 kg Flow at open inlet 260 m 3 /h Negative pressure, max 28 kpa Power consumption 2.2 kw/4 hp < 70 db(a) IFA DC 5800 H Turbo EX Get rid of large quantites of dust in ATEX zone 22 The DC 5800 H Turbo EX is designed for big hand held power tools and heavy cleaning. The unit is of robust and sturdy design for maximum dependability, coupled with a direct driven turbo pump for continuous operation. It is available certified to IP65 standard (conductive dust). Part No kw 400 V/50 Hz Part No HP 460 V/60 Hz schadstoffgeprüft pollutant tested DC 5800 H Turbo EX The DC 5800 H Turbo EX is delivered as standard with the following: Suction hose Ø 50 (Part No 2013) Floor nozzle (Part No 7238e) Suction pipe Ø 50 (Part No 7265) Antistatic fine filter, Polyester (Part No ) HEPA H13 Filter (Part No 42869) TECHNICAL DATA DC 5800 H Turbo EX Weight ca 170 kg Flow at open inlet 470 m 3 /h Negative pressure, max 28 kpa Power consumption 4 kw/ hp Noise level 75 db(a) 137

28 Mobile Dust Extractors Capacity p (kpa) DC 1800/2800 EX 50 Hz DC 1800/2800 EX 60 Hz DC 3800 H Turbo EX DC 5800 H Turbo EX Q (m 3 /h) TECHNICAL DATA DC 1800 EX DC 2800 EX DC 3800 H Turbo EX DC 5800 H Turbo EX H x W x L (mm) 740 x 380 x x 440 x x 600 x x 760 x 00 Weight kg 19 kg 70 kg ca 170 kg Inlet X 50 mm X 50 mm X 50 mm X 76 mm Hose length (Ø 50) 5 m (Ø 38) 5 m (Ø 38) 5 20 m 5 30 m Flow at open inlet 2/185 m 3 /h */ 2/185 m 3 /h */ 260 m 3 /h 470 m 3 /h Negative pressure, max 30/25 kpa */ 30/25 kpa */ 28 kpa 28 kpa Power consumption 1500/1300 W */ 1500/1300 W */ 2.2 kw 4 kw Filter area. fine filter 1.5 m m m m 2 Degree of separation fine filter EN , Class M 99.9 % 99.9 % 99.9 % 99.9 % Filter area microfilter 0.85 m m m m 2 Degree of separation microfilter N HEPA H13 HEPA H13 HEPA H13 HEPA H13 EN , Class H % % % % Container 20 l 40 l 40 l 40 l (115/230 V) 70 db(a) 70 db(a) < 70 db(a) 75 db(a) */ 115/230 V 138

29 Mobile Dust Extractors Compressed Air Driven Dust Extractors DC 1800 TR EX DC 1800/2800 TR EX When no electricity is available The DC 1800/2800 TR EX removes dust in three stages. The first separation occurs in the unit s cyclone, which is a very efficient separation of all the coarser dust. The finer dust is separated in the unit s filter cartridges, and then the Hepa filter takes care the rest of the dust. Filter cleaning with pulse provides long filter life and constant capacity. Vacuum is created in the ejector. The ejector is maintance free. DC 1800 TR EX - Part No 1890 DC 2800 TR EX - Part No 1290 The DC 1800 TR EX is delivered with: Fine filter cellulose (Part No 42029) Plastic sacks, (Part No 42384) HEPA H13 filter (Part No 42027) TECHNICAL DATA DC 1800 TR EX H x W x L, in/cm 32x15x 15/82.5x38x38 Weight, lbs/kg 22/ Inlet, (nom) Ø 2 /50 mm Hose length max rec d (Ø 2 /50 mm) 15 /5 m Max Q, cfm/ m 3 /h 2/170 CA consumption at 90psi/7 bar 5.3 gal/s/20 l/s Air Connection ½ ball valve Max vacuum, inwg/kpa 64/16 Fine Filter area, ft 2 /m 2 16/1.5 Filtration efficiency EN , Class M 99.9 % HEPA Filter area, ft 2 /m 2 9.1/0.85 HEPA Filter efficiency EN , Class H % EN HEPA H13 Collection bin volume 5.3 gal/20 l 68 db(a) DC 2800 TR EX The DC 2800 TR EX is delivered with: Fine filter cellulose (Part No 42029) HEPA H13 filter (Part No 42027) Plastic sacks, 5 pcs (Part No 42285) TECHNICAL DATA DC 2800 TR EX H x W x L, in/cm 47x17x 22/119.5x44x55 Weight, lbs/kg 42/19 Inlet, (nom) Ø 2 /50 mm Hose length max rec d (Ø 2 /50 mm) 15 /5 m Max Q, cfm/ m 3 /h 2/170 CA consumption at 90psi/7 bar 5.3 gal/s/20 l/s Air Connection ½ ball valve Max vacuum, inwg/kpa 64/16 Fine Filter area, ft 2 /m 2 16/1.5 Filtration efficiency EN , Class M 99.9 % HEPA Filter area, ft 2 /m 2 9.1/0.85 HEPA Filter efficiency EN , Class H % EN HEPA H13 Collection sack volume.5 gal/40 l 68 db(a) DC 1800 TR EX DC 2800 TR EX 139

30 Mobile Dust Extractors DC 3800 TR S EX Air driven dust extractor for cleaning and source extraction The DC 3800 TR S EX is a compressed air driven extractor for use in areas where electrical power is not available or practical. The DC 3800TR S EX is a machine with large suction capacity and robust construction while still being compact and easy to maneuver. It is ideal for source extraction on most types of hand-held tools and for industrial cleaning (38 mm and 50 mm system). The DC 3800 TR S EX is supplied with a HEPA filter. Part No 1170 DC 5800 TR Air driven dust extractor for heavier applications The DC 5800 TR is a machine driven by compressed air for use in areas where electricity is not available or not permitted. DC 5800 TR has a very robust design and extra high extraction power, which makes it ideal for source extraction on bigger machinery and in mines. It is also ideal for source extraction from most types of hand held power tools. Part No 1366FJ0800 DC 3800 TR S EX The DC 3800 TR S EX is delivered with: Fine filter Polyester, grounded (Part No 42398) HEPA H13 filter (Part No 42024) TECHNICAL DATA DC 3800 TR S EX H x W x L, in/cm 55x24x 36/139x60x92 Weight, lbs/kg 84/38 Inlet, (nom) Ø 2 /50 mm Hose length max rec d (Ø 2 /50 mm) /5-15 m Max Q, ft 3 / m 3 /h 14126/400 CA consumption at 90psi/6 bar 63.5cfm/1.8 m 3 /m Air Connection 1 ball valve Max vacuum, inwg/kpa 80/20 Fine Filter area, ft 2 /m /1.8 Filtration efficiency EN , Class M 99.9 % HEPA Filter area, ft 2 /m 2 16/1.5 HEPA Filter efficiency EN , Class H % EN HEPA H13 Collection container volume.5 gal/40 l 75 db(a) DC 5800 TR The DC 5800 TR is delivered with: Plastic sacks (Part No 46145) Fine filter, Polyester (Part No ) Capacity p (kpa) DC 3800 TR S EX and DC 5800 TR can be ordererd with antistatic accessories to fulfil the requirements of the ATEX Zone 22 directive 1999/92 ATEX 137. TECHNICAL DATA DC 5800 TR HxWxL, in/cm 71x30x40/180x76x0 Weight, lbs/kg 330/150 Inlet, (nom) Ø 3 /76 mm Hose length max rec d /5- m Max Q, cfm/m 3 /h 300/500 CA consumption at 90 psi/6 bar 90cfm/3.6 m 3 /m Air Connection 1 ball valve Max vacuum, inwg/kpa 84/21 Fine Filter area, ft 2 /m /5 Filtration efficiency EN , Class M 99.9 % Collection sack volume 15.5 gal/60 l 75 db(a) DC 3800 TR S EX DC 5800 TR Accessory: HEPA Filter area, ft 2 /m /3.7 HEPA Filter efficiency EN , Class H % EN HEPA H Q (m 3 /h) 140

31 DC 50-W, DC 75-W Robust chassis Stainless steel container Powerful 1400 W motor 175 l/min discharge pump Easy disassembly and easy to clean Mobile Dust Extractors Re-useable nylon filtration sack, Part No Standard coupling to drain hose When working with concrete coring, large quantities of water have to be used and this water gets very dirty. Using wet-vac to effectively extract the water avoids the working area being wet and dirty. In those wet-vacs, which are equipped with a pump, de-watering of slurry is integrated into the unit and clean water is pumped out of the drain hose. The slurry solids are collected in a filter bag for ease of handling and disposal. The Dustcontrol w-line wet-vacs are easily dissambled for cleaning and de-contamination. This is an important detail on units requiring frequent cleaning. Robust construction helps these units resist the knocks of everyday use. Standard (with pump) DC 50 - W, Part No 13f04300j0, 230 V/50 Hz, EU DC 75 - W, Part No 13g04300j0, 230 V/50 Hz, EU DC 50, 75 - W The DC 50, 75 - Delivered as standard with the following. Suction hose Ø 38, 5 m (Part No ) Floor nozzle B 450 (Part No 7236) Suction pipe Ø 38 (Part No 7258) Filter sack (Part No 42190) TECHNICAL DATA DC 50-W DC 75-W Weight (kg) Negative pressure Air-flow at open inlet (m 3 /h) Vacuum motor, 1 phase 1/230 V (W) 1200/ /1400 Sound Level, db(a)

32 Mobile Dust Extractors Capacity p (kpa) V 0 DC 50, 75 - W 230 V TECHNICAL DATA DC 50-W DC 75-W H x W x L (mm) 870 x 630 x x 630 x 543 Weight (kg) Outlet/Inlet (mm) X 50 X 50 Hose length (m) 5 5 Negative pressure, max 1/230 V (kpa) 21/24 21/24 Flow at open outlet (m 3 /h) Vacuum motor, 1 phase 1/230 V (W) 1200/ /1400 Pump, 1 phase (W) Container volume (l) Pump lift height (m) 7 7 Water hose connection 1 hose barb 1 hose barb Pump capacity (l/min) Particle capacity (mm) Noise level, db(a) Q (m 3 /h) 142

33 Mobile Dust Extractors About Air Cleaners By circu lating the air through a highly efficient HEPA filter, the air in the room is cleaned by removing the hazardous airborne dust that is harmful to health. The most dangerous particles are those that are so small that they are invisible to the eye. The DC AirCube is designed to separate fine and hazardous dusts down to 0.3 microns. An example of such particulate could be silca dust, which is found in concrete, brick, grout, mortar and drywall compound. When jack hammering, wall grinding, or concrete grinding during demolition work, kitchen and bathroom renovations, and general construction, the DC AirCube is an ideal solution. It is also a popular choice in bakeries, and carpentry shops since it purifies the air and filters health hazardous flour or wood dust. By circulating the air through a highly efficient HEPA filter, the air in the room is cleaned from airborne dust. One or several DC AirCubes can be mounted in the ceiling in e.g. a bakery or in a wood-working shop. DC AirCube 500 DC AirCube 500 The DC AirCube 500 has been developed for ease of use and high durability. It is built from stainless steel sheet metal to be extra damage resistant. The fan unit is a radial blower with a specially designed scroll to build up high pressure across its complete flow range. This means that the unit generates large amounts of airflow during the entire lifetime of the filter. Equipped with an el outlet for lamp and other. An exhaust hose can be used to create negative pressure in a sealed room. The fan has two speed settings that allows for economical operation, for example during the night. Part No , 230 V/50 Hz 2 W Part No , 230 V/50 Hz, UK Part No , 115 V/50 Hz, 145 W, UK Part No , 115 V/60 Hz US/Can Part No , 230 V/50 Hz CH Accessories Part No 2420 Hose 125 Part No Funnel con. 125 Part No 4138 Hose clamp TECHNICAL DATA DC AirCube 500 Weight 13 kg Flow at open outlet 500 m 3 /h Negative pressure max 400 Pa Power consumption 230 V, 2 W/115 V, 145 W Degree of separation EN HEPA db(a) speed 1 65 db(a) speed The lowest possible particulate concentrations will be achieved by using both source extraction and an air cleaner

34 Mobile Dust Extractors DC AirCube 1200 The The AirCube 1200 is a compact variant with a capacity and size in between the AirCube 500 and AirCube with ECO-fan. The main features for both air cleaners are: Variable speed transmission to save energy, e.g. at night High effective ECO-fan with less energy consumption Lower sound level TECHNICAL DATA DC AirCube 1200 Washable stainless steel filter housing Trouble-free filter change (cartridge air filter) for easy service Weight Flow at open outlet Negative pressure 20 kg 10 m 3 /h max 601 Pa Power consumption 230 V, 385 W Part No 1100, 230 V/50 Hz, EU Part No 1101, 230 V/50 Hz, UK Part No 1102, 115 V/50 Hz, UK Part No 1103, 115 V/60 Hz, US/CAN Part No 1108, 230 V/50 Hz, CH DC AirCube 2000 Degree of separation EN HEPA 13 Pre-filter 0.3 m 2 HEPA 5 m 2 Max The DC AirCube 2000 is a compact and robust design with a capacity of 1800m 3 /h which makes it our most powerful single phase aircleaner. - with ECO-fan. It has a 0.63 m 2 pre-filter and a HEPA H13 microfilter of 8.2 m 2 and a filter indication lamp that is lit when it s time to change the filter. The air exhaust is directed upwards in order to prevent dust to whirl up from the floor. With its ergonomic design it is easy to carry and transport. It is also prepared to connect to an exhaust hose without a reduction in performance. TECHNICAL DATA DC AirCube 2000 DC AirCube 2000 can be positioned horizontally flat on the floor with the exhaust then pointing to the side. Weight 25 kg Part No 2000, 230 V/50 Hz Part No 2002, 230 V/50 Hz, UK Part No 2003, 115 V/50 Hz, UK Part No 2004, 115 V/60 Hz, US/CAN Part No 2008, 230 V/50 Hz, CH Flow at open outlet 1800 m 3 /h Negative pressure 500 Pa Power consumption 230 V, 505 W, 115 V, 350 W HEPA H13 Filter m 2 Pre-Filter 0.7 m 2 Max db(a) Accessories Part No Hose kit 315 Part No Bend Hose/socket/clip 144 Socket/bend 90o Technical Data DC AirCube 500 DC AirCube 1200 DC AirCube 2000 H x W x L, in/cm 15 x 13 x 20/38 x 34 x / x 20 x 22/2 x 51 x 55 Weight 29 lbs/13 kg 44 Ibs/20 kg 55 Ibs/25 kg Outlet/Inlet Ø 5 /125 mm/(inlet optional) /12 /250/315 mm 12 /315 mm Hose length (optional) (Ø 5 )/3 m (125 mm) - - Max Q 500 m 3 /h 10 m 3 /h 1850 m 3 /h, 50 Hz, 1650 m 3 /h, 60 Hz Negative pressure max1.6 inwg/400 Pa 600 Pa 500 Pa Rated Output 230 V, 2 W/115 V, 145 W 230 V, 385 W, 115 V, 195 W 230 V, 505 W, 115 V, 350 W HEPA Filter efficiency EN , Class H % % % EN HEPA H13 HEPA H m 2 HEPA H m 2 Sound Level 45 db(a) speed 1 65 db(a) speed 2 Max db(a) Max db(a)

35

36