CORPORATION. Solutions Start Here

Transcription

1 CORPORATION Solutions Start Here

2 About Us We are a company that draws on innovation and excellence to provide solutions that enhance the ability for caregivers to effectively fulfill their duties. Our goal is to build a high-performing medical technology company that gives healthcare providers the tools they need to achieve better outcomes. We are committed to helping our customers deliver safer, more efficient, technologically advanced equipment to the market place. Caregivers throughout the world look to us for solutions because we strive for excellence and adhere to their suggestions for improvement. We bring the passion, dedication, innovation and the drive in developing solutions that matter in making a difference in the lives we help save. Our products comply with world renowned healthcare standards such as NFPA, HTM, CSA, CE, FDA, IEC, UL and ISO We continuously strive to achieve superior clinical results, and push the frontiers of medical research while maintaining uncompromising clinical integrity. Our strategic alliances extend to over 30 countries. Our partners rely on us regularly to provide quality turn-key solutions to better serve the healthcare industry. We take great pride in providing accredited products that meet and exceed industry requirements. At SMP, we don t just make promises, we deliver results! Solutions Start Here

3 Toronto SMP WORLDWIDE Global Distribution Sales and Service in over 30 Countries

4 SECONDARY PRODUCTS Flowmeters P1 HOSPITAL BEDS & STRETCHERS SMP-300ML P21 3-Mode Continuous Vacuum Regulator P3 SMP-350ML P22 Dual-Mode Intermittent Vacuum Regulator P5 SMP-525EL P23 Accessories-Suction Traps P8 SMP-550EL P24 Accessories-Humidifiers / Nebulizers P9 SMP-450ML P25 Accessories-Collection Bottles P10 SMP-3000 P26 Adapters P11 SMP-PB800 P27 Thoracic Suction Control Unit P13 SMP-HC700 P28 SMP Theater Suction Trolley P14 Gas Outlets P15 Disposables Devices P17 Solutions Start Here

5 MEDICAL ARCHITECTURAL SOLUTIONS Diamond Series Quartz Series Orion Series Fairfield Rail Infinite Series Tower Series Bed Bumper Bed Docker P29 P31 P33 P34 P35 P36 P37 P38 Patient Room Furnishings Overbed Tables P39 Patient Room Seating P40 Bedside Cabinets P41 Medicine Trolleys P47

6 Flowmeters SMP Flowmeters are available for both oxygen and medical air, making SMP the ideal choice for any healthcare facility. Our flowmeters are accurate, reliable and durable with an easy to use design consisting of fewer parts offering less maintenance. The flow tubes are made from crack-resistant polycarbonate housings and calibrated at 50 psig inlet pressure, combined with a steady machined base. All SMP flowmeters are designed for quick connection and are compatible with most standard outlets. They come with a standard 1/8 FNPT connection, but can also be fitted with various adapters and accessories to meet facility requirements. Features: High-quality stainless steel ball float provides unparalleled accuracy Compact in size and weight Crack-resistant polycarbonate housing Light-weight aluminum body Expanded accurate scale Durable stainless steel shut-off valve Leak-free flow control O-Ring Back-pressure compensated 100% tested to ensure accuracy Available in ISO and US colors Oxygen Flowmeter (US) Air Flowmeter (US) Oxygen Flowmeter (ISO) Air Flowmeter (ISO) Solutions Start Here P1

7 Single Oxygen Flowmeter with 360 º power outlet Dual Flowmeter Dual Flowmeter with 360 º power outlet Flowmeter Ordering Guide FM XX - XX Control Knob To order Dual Oxygen Flowmeter, please put D in front of FM Example: DFM UO - BS Oxygen I=White U=Green Air I=Black U=Yellow Type of Flowmeter ( A = Air) ( O = Oxygen) Adapter (XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) (JS = JAPANESE STANDARD) (DN = GERMAN STANDARD) (BS = BRITISH STANDARD) (DS = DISS STANDARD) (PB = PURITAN BENNETT) Flowmeters (Dual Oxygen Flowmeter, US Standard with an British Standard adapter) P2

8 3-Mode Continuous Vacuum Regulator The SMP 3 Mode Continuous Vacuum Regulator is a perfect combination of clearly marked indicators and precise calibration, providing the user with a high quality product for maximum performance and minimum maintenance. In addition, this vacuum regulator provides a broad selection of fittings ensuring compatibility with existing vacuum outlets in any medical facility. Functions: REG: Allows degree of suction to be adjusted by use of the regulating knob OFF: Suction is no longer on or being supplied to the patient FULL: Maximum suction is administered to the patient Features: Gauge range: mmhg Gauge accuracy: ±1.6% Color coded flow ranges Glow in the dark gauge for easy reading under low light conditions Gauge available in ISO or US configurations Accurate, precise suction control Ergonomic design Can be sterilized internally with cold disinfectant Durable high quality ABS protection body for high impact resistance Comes pre-equipped with an overflow safety trap made from high performance precision thermoplastic Also available in (0 400 mmhg) & (0 760 mmhg) Shell Color: White or Yellow Solutions Start Here P3

9 PRODUCT FEATURES CONTINUOUS VACUUM REGULATOR mmhg mmhg mmhg OFF REGULATE FULL Regulated Vacuum Range Gauge Display Range 0-FULL Line Vacuum 0-FULL Line Vacuum 0-FULL Line Vacuum mmhg mmhg mmhg Color Coded for Pressure Level Gauge Accuracy Gauge Direction Flow Rate Medical Suction Equipment Standard ± 1.6% ± 1.6% ± 1.6% Clockwise / Counter Clockwise 0-60L/min without fitting at full pressure Counter Clockwise Clockwise / Counter Clockwise 0-60L/min without fitting at full pressure 0-60L/min without fitting at full pressure ISO ISO ISO Vacuum Regulator Warranty Length 5 years 5 years 5 years P4

10 Dual-Mode Intermittent Vacuum Regulator The SMP Dual Mode Vacuum Regulator allows for both intermittent and continuous modes of surgical suction. With its durable design and construction this vacuum regulator offers maximum performance and minimum maintenance allowing for it to be the ideal choice of medical practitioners today. Functions: REG: Allows degree of suction to be adjusted by use of the regulating knob OFF: Suction is no longer on or being supplied to the patient INT: Allows an adjustable suction level that cycles between ON and OFF Features: Gauge range: mmhg Gauge accuracy: ±1.6% Fully adjustable timing cycle Preset at 16 seconds ON, 8 seconds OFF in intermittent mode Intermittent mode regulates the flow rate to ASTM standard at 8 LPM Glow in the dark gauge for easy reading under low light conditions Quiet, reliable operation with pneumatic module Gauge available in ISO or US configurations Accurate, precise suction control Ergonomic design Can be sterilized internally with cold disinfectant Durable high quality ABS protection body for high impact resistance Comes pre-equipped with an overflow safety trap made from high performance precision thermoplastic Also available in (0 400 mmhg) & (0 760 mmhg) Shell Color: White or Yellow Solutions Start Here P5

11 PRODUCT FEATURES INTERMITTENT VACUUM REGULATOR mmhg mmhg mmhg OFF REGULATE FULL Regulated Vacuum Range Gauge Display Range 0-FULL Line Vacuum 0-FULL Line Vacuum 0-FULL Line Vacuum mmhg mmhg mmhg Color Coded for Pressure Level Gauge Accuracy ± 1.6% ± 1.6% ± 1.6% Gauge Direction Flow Rate Medical Suction Equipment Standard Warranty Length Clockwise / Counter Clockwise 0-60L/min without fitting at full pressure Counter Clockwise Clockwise / Counter Clockwise 0-60L/min without fitting at full pressure 0-60L/min without fitting at full pressure ISO ISO ISO years 5 years 5 years Vacuum Regulator P6

12 Back Fitting DS: Diss OH: Ohmeda Bottom Fitting CH: Chemetron DN: German WITH SUCTION TRAP DISS MALE (NO TRAP) BS: British JS: Japanese V X X - X X X - X - X X - X Vacuum Regulator Shell Color (Y = Yellow) (W = White) Mode (I = Intermittent) (C = Continuous) Example VYI U - DS - T Color: Yellow shell color Mode: Intermittent Gauge Range: mmhg Gauge Direction: Clockwise Adapter: DISS adapter Bottom Fitting: Trap * mmhg only available in Counter Clockwise Gauge Range (300 = 300mmHg) (400 = 400mmHg) (760 = 760mmHg) Gauge Direction ( I = Counter Clockwise) ( U = Clockwise) Bottom Fitting (T = Trap) (N = Nipple) Adapter (XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) (JS = JAPANESE STANDARD) (DN = GERMAN STANDARD) (BS = BRITISH STANDARD) (DS = DISS STANDARD) (PB = PURITAN BENNETT) Solutions Start Here P7

13 Accessories Suction Traps SMP-880VT-0 SMP-880VT-1 SMP-880VT-2 SMP-880VT-3 SMP-880VT-4 with no fitting on top (1/8 NPT Female) with male trap fitting only with DISS female nut & nipple vacuum fitting with DISS female vacuum hand-tight with tubing nipple (5/16 hose barb) SMP-880VT-5 SMP-880VT-6 SMP-880VT-7 ST-150 with complete trap fitting assembly (male & female) with complete DISS female nut & nipple vacuum fitting with complete DISS female vacuum hand-tight with DISS female vacuum hand-tight P8

14 Humidifiers / Nebulizers SMP-7200R HUM-R-135 HUM-R-315 SMP SMP Reusable Humidifier with Silver Top Bubble Humidifier Reusable Humidifier Disposable Humidifier Disposable Humidifier 140 ml 135 ml 315 ml 250 ml 400 ml SMP HUM-B-JET NEB-D NEB-R Accessories Disposable Humidifier Bubble Jet Nebulizer Disposable Large Volume Nebulizer Multi-Purpose Nebulizer 400 ml 375 ml 500 ml 375 ml Solutions Start Here P9

15 Collection Bottles CB18-PLSY-D CB30-PLSY-D CB18-PLYS CB18-PLYC CB30-PLYC Disposable Collection Jar (Polystyrene) Disposable Collection Jar (Polystyrene) Reusable Collection Jar (Polysulfone) Reusable Collection Jar (Polycarbonate) Reusable Collection Jar (Polycarbonate) 1800 ml 3000 ml 1800 ml 1800 ml 3000 ml Accessories OXY-T Adult = OXY-MTA Child = OXY-MTC OCN (1)SLH-M, (2)SLB, (3)SLH-P Accessories Oxygen Connecting Tube Oxygen Mask Oxygen Connector Slide Bracket Bottle Holder P10

16 Adapters Ohmeda DISS DISS (Hand-Tight) Chemetron Gases Model Number Connections Oxygen Vacuum ADM-OHM-018-OXY ADM-OHM-018-VAC Medical Air Nitrous Oxide WAGD ADM-OHM-018-AIR ADM-OHM-018-N2O ADM-OHM-018-WAGD Carbon Dioxide ADM-OHM-018-CO2 Oxygen Vacuum Medical Air Nitrous Oxide WAGD ADM-OHM-516-OXY ADM-OHM-516-VAC ADM-OHM-516-AIR ADM-OHM-516-N2O ADM-OHM-516-WAGD 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb Carbon Dioxide ADM-OHM-516-CO2 5/16 Hose Barb Oxygen Vacuum Medical Air Nitrous Oxide WAGD Carbon dioxide ADM-DIS-018-OXY ADM-DIS-018-VAC ADM-DIS-018-AIR ADM-DIS-018-N2O ADM-DIS-018-WAGD ADM-DIS-018-OXY Nitrogen ADM-DIS-018-N2 Oxygen Vacuum Medical Air Nitrous Oxide WAGD Carbon dioxide SMP-3222U-OXY-NT2 SMP-3222U-VAC-NT2 SMP-3222U-AIR-NT2 SMP-3222U-N2O-NT2 SMP-3222U-WAG-NT2 SMP-3222U-CO2-NT2 Nitrogen SMP-3222U-NIT-NT2 Oxygen Vacuum Medical Air Nitrous Oxide WAGD ADM-CHM-018-OXY ADM-CHM-018-VAC ADM-CHM-018-AIR ADM-CHM-018-N2O ADM-CHM-018-WAGD Solutions Start Here P11

17 Puritan-Bennett FS (AFNOR TYPE: NF S ) Oxygen Vacuum Medical Air Nitrous Oxide WAGD Oxygen Vacuum Medical Air Nitrous Oxide WAGD Oxygen Vacuum Medical Air Nitrous Oxide Oxygen Vacuum Medical Air Nitrous Oxide Chrome-plated Brass SMP-3104-OXY-NT2 SMP-3104-VAC-NT2 SMP-3104-AIR-NT2 SMP-3104-N20-NT2 SMP-3104-WAG-NT2 SMP-3104-OXY-HB4 SMP-3104-VAC-HB5 SMP-3104-AIR-HB4 SMP-3104-N2O-HB4 SMP-3104-WAG-HB5 ADM-FSA-018-OXY ADM-FSA-018-VAC ADM-FSA-018-AIR ADM-FSA-018-N2O ADM-FSA-014-OXY ADM-FSA-516-VAC ADM-FSA-014-AIR ADM-FSA-014-N2O Stainless Steel SMP-3114-OXY-NT2 SMP-3114-VAC-NT2 SMP-3114-AIR-NT2 SMP-3114-N20-NT2 SMP-3114-WAG-NT2 SMP-3114-OXY-HB4 SMP-3114-VAC-HB5 SMP-3114-AIR-HB4 SMP-3114-N2O-HB4 SMP-3114-WAG-HB5 1/4 Hose Barb 5/16 Hose Barb 1/4 Hose Barb 1/4 Hose Barb 5/16 Hose Barb 1/4 Hose Barb 5/16 Hose Barb 1/4 Hose Barb 1/4 Hose Barb GS (DIN TYPE: DIN ) Oxygen Vacuum Medical Air Nitrous Oxide Carbon dioxide Nitrogen Oxygen Vacuum Medical Air Nitrous Oxide Carbon dioxide Nitrogen ADM-DIN-018-OXY ADM-DIN-018-VAC ADM-DIN-018-AIR ADM-DIN-018-N2O ADM-DIN-018-CO2 ADM-DIN-018-N2 ADM-DIN-516-OXY ADM-DIN-516-VAC ADM-DIN-516-AIR ADM-DIN-516-N2O ADM-DIN-516-CO2 ADM-DIN-516-N2 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb BS (BS TYPE: BS ) JIS Oxygen Vacuum Medical Air Nitrous Oxide Oxygen Vacuum Medical Air Nitrous Oxide Oxygen Vacuum Medical Air Nitrous Oxide Entonox ADM-HTM-018-OXY ADM-HTM-018-VAC ADM-HTM-018-AIR ADM-HTM-018-N2O ADM-HTM-516-OXY ADM-HTM-516-VAC ADM-HTM-516-AIR ADM-HTM-516-N2O ADM-JIS-018-OXY ADM-JIS-018-VAC ADM-JIS-018-AIR ADM-JIS-018-N2O ADM-JIS-018-ETX 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb 5/16 Hose Barb Adapters P12

18 Thoracic Suction Control Unit SMP offers a thoracic suction control unit which is used to measure and adjust a continuous low vacuum level. This low pressure suction unit is mainly used for thoracic procedures or neonatology. The unit is standardized throughout every hospital, ranging from ER s, Recovery Rooms and ICU s thus filling the need for continuous low pressure wherever required. The unit has a durable chamber, safety shut-off valve and allows an adjustable vacuum pressure between 0-30CMH2O. The thoracic suction control unit offers an exceptionally accurate adjustment and ongoing visual control of the vacuum level. The vacuum adjustment is dependent on physical aspects such as the water level rather than mechanical aspects, thus ensuring great reliability and stability. Features & Benefits: Acrylic body and graduated rod Chrome-plated brass head Overflow preventative shut- off valve Micrometric incremented knob Connection available in direct probe type or rail mounting system type Rod graduated in centimeters(cm), ensuring the vacuum level reading accuracy EN ISO standard compliant Ordering Guide SMP - TSU-XX Adapter ( XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) ( JS = JAPANESE) ( DN = GERMAN) ( BS = BRITISH) ( DS = DISS) ( PB = PURITAN BENNETT) Solutions Start Here P13

19 SMP Theater Suction Trolley Introducing the SMP Theater Suction Trolley, the fully customizable suction trolley ideal for anyplace requiring mobile suction. This sturdy trolley will provide you with all the necessities to help achieve the greatest results by accomodating to your individual needs. The unit caters to a number of diverse settings such as hospital rooms, accidents, emergency use and anywhere else where mobile suction is desired. Features Choice of 2 or 4 bottle holders Choice of 2 or mL polycarbonate collection bottles Choice of adapter Choice of vacuum regulator with POM safety trap (0-300 mmhg, mmhg, mmhg), ISO or US configuration 45 cm PVC tube (x1) 360 cm PVC tube (x1) 200 cm Yankauer suction tip Choice of cart with brakes or without 3 meters of high pressure hose with hose adapter Suction canister holder with 360 pivot capability The four-port, on-off valve allows quick change of canisters during suction process Allows movement of the regulator in any direction making visual observation of the suction rate easier Ordering Guide S M P - S T - V X X - X X X - X - X - X X - X - X X - X Shell Color Y = Yellow shell W = White shell Mode (I = Intermittent) (C = Continuous) Gauge Direction ( I = Counter Clockwise) ( U = Clockwise) # of Bottles 2 or 4 Type of Bottles 18 = 1800 ml 30 = 3000 ml Color of Hose Y = ISO W = US Castors (L = Lockable Castors) (N = Non-lockable) Regulator Gauge Range (300 = 300mmHg) (400 = 400mmHg) (760 = 760mmHg) Note: mmhg vacuum regulator only available in counter clockwise gauge Adapter (XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) (JS = JAPANESE) (DN = GERMAN) (BS = BRITISH) (DS = DISS) (PB = PURITAN BENNETT) P14

20 Gas Outlets SMP Canada manufactures a variety of gas outlets to suit the needs of any healthcare facility. These gas outlets are available in various standards of choice such as: OHMEDA, DISS, JIS (Japanese), DIN (German), and BSO (British). Each type of gas outlet complies with corresponding standard regulations, and are 100% pressure & leak tested. SMP gas outlets are available in a full range of mounting options such as Wall type, Console type, and Ceiling. In addition, each gas outlet is also available with its own gas specific quick adapter. OHMEDA Standard Outlets Diameter-Index Safety System (DISS) Japanese International Standard (JIS) German Standard Outlets (DIN) British Standard Outlets (BSO) Solutions Start Here P15

21 SMP Gas Outlet Ordering Guide X X X - X X X - X - X X X - X X Type (WAL = WALL TYPE) (CON = CONSOLE TYPE) (WAB = WALL TYPE WITH BOX) (CEI = CEILING TYPE) Assembly (RI = ROUGH IN ASSEMBLY) (FA = FINISHED ASSEMBLY) (CS = COMPLETE SET) Outlet Standard Standard Gas (OHM = OHMEDA) ( I = ISO) (OXY = OXYGEN) (JIS = JAPANESE STANDARD) ( U = US) (AIR = MEDICAL AIR) (DIN = GERMAN STANDARD) (HTM = BRITISH STANDARD) (DIS = DISS STANDARD) Example OHM - WAL- U - OXY - RI Outlet Standard: OHMEDA Type: Wall Type Standard: US Standard Gas: Oxygen Assembly: Rough In Assembly Please note: JIS outlets DIN outlets HTM outlets Only available in ISO standard (VAC = VACUUM) (CO2 = CARBON DIOXIDE) (N2O = NITROUS OXIDE) (NIT = NITROGEN) (AR8 = AIR 800) (N28 = NITROGEN 800) (ETX = ENTONOX) (WAG = WASTE ANESTHETIC GAS) Gas Outlets P16

22 Disposable Devices SMP Canada carries an inclusive range of disposable medical devices to meet all your medical facility needs. Our disposable devices provide the longest life and the greatest durability; in addition we are accredited with ISO 13485:2003 and CMDCAS certification for quality system and quality commitment in our operations thus making our medical disposables suitable for regulatory requirement mandated by law. Our product range is inclusive of the following medical and surgical disposable items: Available in 150ml, 300ml, 400ml and 450ml size Special packaging allows to save shipping cost and storage space Drain port with attached plug comes pre-equipped for emptying exudate collected by the unit Standard Y connector for dual drainage and anti-reflux valve is incorporated to prevent reverse flow during emptying and reactivation Model Number: 150ml: PV-150-WD 300ml: PV-300-WD 450ml: PV-450-WD 400ml: PV-400-WD P-Vac Closed Wound Drainage System Easy to use Completely disposable and portable system Available with curved needles of various sizes to match catheter sizes Model Number: MV-50-WD-TD Mini-Vac 50ml Wound Drainage with Drain & Trocar Solutions Start Here P17

23 Available in 125cc or 200cc Silicone type provides easy activation of suction Internal anti-reflux valve is incorporated to prevent reverse flow during emptying and reactivation The 400ml bulb features dual inlet ports allowing connection of two drains without a Y connector Clear reservoir and graduations facilitate the measurement of fluid and exudate Silicone Evacuator Model Number: 125cc: SE cc: SE-200 Indicator dot makes drain placement quick and easy Smooth perforations are heat polished for easy, painless removal Perforations are positioned in alternate 90 planes for effective exudate removal Model Number: SPD Silicone Perforated Drain without Trocar 2 lateral eyes, rounded tip and fitted with a female Luer adapter Flexible adapter with cap, fits any standard Luer tip syringes Minimal friction surface with smooth tip ensures easy traumatic intubation Transparent lines provide full visibility of line contents Model Number: PFD Disposable Devices Pediatric Feeding Tube P18

24 2cm graduations Made from smooth kink-resistant PVC Spiral hole configuration helps reduce tissue invagination for optimal drainage efficiency Connector is pre-equipped to facilitate the immediate connection of catheter with the drainage system and secure connection to any sized collection tubing Model Number: TDC Thoracic Drainage Catheter Manufactured from non-toxic, medical grade PVC compound Catheter tip permits easy insertion while reducing risk of trauma Trocar handle helps control insertion and removal Model Number: TTC Thoracic Trocar Catheter Disposable Devices Dispensed from a single convenient box Kink resistant tubing provides superior safety for the patient Can be easily cut to desired length with scissors Flexible funnel ends attaches easily to most fittings Model Number: OXY-CTR-30 Bubble Tube 30cm Solutions Start Here P19

25 Available in 45cm, 180cm and 360cm length Ribbed connecting tubing for enhanced drape ability Multi-fit capability to fit all suction devices and sources Reduced friction Suction Tube Model number: 45cm: CTB-045, 180cm: CTB-180, 360cm: CTB-360 Features drip chamber and roller clamp Proximal end fitted with tapered connector Individually packed in peelable pouch pack Manufactured from non-toxic, non-irritant medical grade PVC Single Robert s clamp located above drip chamber facilitates quick and easy changing of solution bag Model Number: IS-1 Irrigation Set (single lead) Manufactured from non-toxic, non-irritant medical grade PVC Individually packed in peelable pouch pack Dual Robert s clamps located above drip chamber facilitate quick and easy changing of solution bags Comes with multi-flow dual spikes delivering high flow rates Proximal end fitted with flexible latex tubing for easy connection to Endoscope Irrigation Set (dual lead) Model Number: IS-2 Manufactured from non-toxic, non-irritant medical grade PVC Dual Robert s clamps located above drip chamber facilitate quick and easy changing of solution bags Proximal end fitted with flexible latex tubing for easy connection to Endoscopes Model Number: PFD Disposable Devices Irrigation Set (4 leads) P20

26 Hospital Beds & Stretchers SMP-300ML Manual Bed The SMP-300ML provides users with the greatest comfort, quality, and ease of use. This bed provides simple and straight-forward operations via the 3 crank system making it the ideal bed for any healthcare facility. The SMP-300ML is designed to have the benefits for the patient and caregiver in mind backed by excellent quality standards and years of superior service. Triple manual crank system Head and foot board frame made of high quality ABS moulding. Movable head and foot board with a locking mechanism One-handed side rail release FEATURES: TECHNICAL DETAILS: Central control braking system Channel frame construction provides superior strength and reduced weight Reinforced frame resists twisting and bending Side bumpers included 5 inch castors 4 individual collapsible side rails Telescopic IV pole with 4 hooks 2 IV pole locations Size: (L)88.2 x (W)43.3 x (H) (unit of measure: in.) (L)2130 x (W) 980 x (H) (unit of measure: mm) Back angle: 0-80 (+/- 5 ) Patient foot board section: 0-40 (+/- 5 ) Adjustable height: in. ( mm) Solutions Start Here P21

27 SMP-350ML Manual Bed The SMP-350ML was designed to make the lives of patients and healthcare workers safer and easier. This revolutionary hospital bed addresses the needs of a wide range of hospital settings including regular patient rooms in medsurg. It is loaded with regular hospital bed features, and it has the ability to go lower to the ground than any other bed on the market. All patients have varying needs that change constantly. Shorter, frail, elderly, and postsurgery patients benefit greatly from the safety of a bed such is this one. FEATURES: Exceptionally low height promotes proper positioning for safe patient entry and exit Full side rail positioning ensures patient safety, essential in acute care environment Enhanced mobility and swivel castor functionality at both ends of the bed Maximum load capacity: 280 kg Central control braking system 5 inch castors Telescopic IV pole with 4 hooks 2 IV pole locations Conforms to ISO13485:2003 standards Triple manual crank system Head and foot board frame made of high quality ABS moulding. Movable head and foot board with a locking mechanism Collapsible aluminum side rails that can lock and unlock easily, and quickly TECHNICAL DETAILS: Size: (L) 83.9 x (W) 38.5 x (H) (unit of measure:in.) (L) 2130 x (W) 980 x (H) (unit of measure:mm) Back angle: 0-80 (+/- 5 ) Patient foot board section: 0-40 Adjustable height: in. ( mm) Hospital Beds & Stretchers P22

28 SMP-525EL Electric Bed SMP-525EL bed is a remarkable choice in electric beds allowing patients and caregivers to have complete control via the control panel conveniently located on side rail. In addition, the SMP-525EL bed comes complete with plenty of features making it perfectly suited for any healthcare facility. This bed offers an economical solution to users without sacrificing features important to acute care delivery. Hospital Beds & Stretchers Bed controls located on the interior and exterior of head side rails. Onehanded side rail release FEATURES: Safest design to help caregivers get patients in and out of bed Extraordinary one button function puts the bed in ideal position for patient transport Enhanced mobility and swivel castor functionality at both ends of the bed IV pole guides built into the push handles Four wheels adopt central control system Body contour feature to reduce patient discomfort during the motion of the litter sections. Conforms to ISO13485:2003 standards Attendant control panel located at the foot end of the bed allows caregivers direct control over critical functionalities Bed litter specifically designed for greater breathability TECHNICAL DETAILS: Size: (L) 85.4 x (W) x (H) 18.9 (unit of measure: in.) (L) 2170 x (W) x (H) 480 (unit of measure: mm) Back angle: 0-65 Patient foot board section: 0-45 Adjustable height: in. ( mm) Trendelenburg angle and Reverse Trendelenburg angle: 0-10 Maximum load capacity: 250 kg Solutions Start Here P23

29 SMP-550EL Electric Bed With Electronic Central Braking System As the needs of caregivers continue to evolve in the medical-surgical unit, SMP has designed a bed that is made to improve your efficiency at work and hence, increasing patient outcomes significantly. The SMP-550EL electric bed represents a true evolution of care in the medsurg environment. It defines itself through its ease of use, safety considerations and product quality. Simple yet efficient, the SMP-550EL is the ultimate choice for care. FEATURES: TECHNICAL DETAILS: Detachable head/foot board made of polypropylene plastic allows for easy cleaning and long term use. One-handed side rail release Patient lock-out controls Dual wheel castors 4 IV Pole sockets Battery back-up 10 Trendelenburg and Reverse Trendelenburg Electronic central braking system allows castors to lock with just one button Newly designed power connection prevents accidental snapping of power cable Size: (L) 91.3 x (W) 41.3 x (H) (unit of measure: in.) (L) 2320 x (W) 1050 x (H) (unit of measure: mm) Hi-Low: in. (530mm-710mm) Back-rest lifting angle: 0-65 Knee-rest lifting angle: 0-45 Trendelenburg Angle & Reverse Trendelenburg Angle: 0-10 Loading Capacity: 250kg Body contour feature made of soft connection to reduce patient discomfort during the motion of the litter sections. An HBSW, IEC, FDA compliant side rail design ensuring optimal safety. Hospital Beds & Stretchers Fully covered base to ensure easy maintenance and cleaning of bed with no sharp edges. Allows for optimal infection control Conforms to ISO13485:2003 standards P24

30 SMP-450ML Transport Stretcher Introducing the SMP-450ML manual transport stretcher for patient transport. This bed offers a modern design for quick and effective patient transport making it a simple yet economical solution for all healthcare facilities. Enhanced features such as a retractable fifth wheel facilitate efficient patient transport for today s healthcare professionals. Hospital Beds & Stretchers FEATURES: Retractable fifth wheel steering system Clearly marked arrows allow users to operate easily Light weight & easy to clean 2 IV pole sockets Central locking system Integrated oxygen bottle holder Back rest adjustable by gas spring, other functions adjustable by hydraulic mechanism One-handed side rail release Conforms to ISO13485:2003 standards TECHNICAL DETAILS: Size: (L) 75.2 x (W) 26.5 x (H) (unit of measure: in.) (L) 1910 x (W) 673 x (H) (unit of measure: mm) Hi-Low: in. ( mm) Self weight: 79 kg Load bearing: 159 kg Packing: 0.98 CBM/PC Solutions Start Here P25

31 SMP-3000 Hydraulic Patient Stretcher Introducing the SMP-3000 hydraulic patient stretcher for patient transport. This stretcher offers a modern design for quick and effective patient transport making it a simple yet economical solution for all healthcare facilities. Enhanced features such as a retractable fifth wheel facilitate efficient patient transport for today s healthcare professionals. FEATURES: TECHNICAL DETAILS: Back rest adjustment assisted by hydraulic Foldable side guards, easy and safe handling, solid and hygienic construction, no danger of accidental crushing Chassis and upper part features - smooth and sealed coated plastic sheets for optimal hygienic cleaning and disinfection 200mm castors with central locking Fifth castor for easy maneuvering Minimum height of 550mm allows easy use for the patient and hospital staff High / Low, Trendelenburg / Reverse Trendelenburg positions Easy adjustment by levers located on both sides X-Ray translucent back rest Patient belt for fastening Oxygen tank holder Height adjustable stainless steel IV pole Washable at 95 F, fire retardant, mattress cover Plastic crash bumpers Easy to clean, plastic coating, telescoping pistons Electrostatic painted metal frame Functional board (Optional) Overall length: 85 in. (2160 mm) Width: 30.3 in. (770 mm) Height range: in. ( mm) Trendelenburg: 15 Reverse Trendelenburg: 15 Back rest angle: 90 Patient surface length: 76.8 in. (1950 mm) Patient surface width: 24.4 in. (620 mm) Back section length: 28.7 in. (730 mm) Weight: 110 kg Safe working load: 225 kg Castor diameter: 7.9 in. (200 mm) Hospital Beds & Stretchers P26

32 SMP-PB800 Electric Pediatric Bed The SMP-PB800 is the ideal hospital bed for pediatric patients. To help ease the transition between home and hospital environments, this bed, with its various features and cutomizable decorations helps children feel more secure so they can sleep comfortably. Be assured, when it comes to the child s comfort and their safety, the SMP-PB800 is the perfect choice. Hospital Beds & Stretchers FEATURES: Power operated back and leg rest adjustment Hand control unit Auto contour Hygienic design (PP), lockable and tuck away side rails Removable head and foot ends Lockable and tuck away side rails Electrostatic painted metal frame Height adjustable stainless steel IV pole Plastic crash bumpers Angled gauge for back Comprehensive range of accessories available Trendelenburg position (Optional) TECHNICAL DETAILS: Height range: 20.5 in. (520 mm) Back rest Angle: 70 Leg rest Angle (Max.): 38 Underbed clearance: 6.7 in. (170 mm) Overall length: w73 in. (1855 mm) Width: 36.6 in. (930 mm) Castor diameter: 4.9 in. (125 mm) Product weight: 90 kg Safe working load: 180 kg Solutions Start Here P27

33 SMP-HC700 Electric Home Care Bed Home is where the heart is and there is simply no place like it. Most people want to remain in their homes when faced with a medical condition that limits mobility. SMP Canada is there to help when such dire times arise. Introducing the SMP-HC700, SMP s next generation of home care beds. With unsurpassed style, comfort and quality, the SMP-HC700 can help make your home environment as safe and comfortable as possible. FEATURES: 2 pc. electro-motor, 1pc. control box, 1pc. handset Solid wood outside, powder spray painting steel Optional: Aluminum alloy side rails Two Sections I.V. Pole (Four Hooks) Frame: Stainless steel Collapsible aluminum side rails that can lock and unlock easily, and quickly TECHNICAL DETAILS: Size: X X (unit of measure: in.) 2140 X 1020 X 400 (unit of measure: mm) Angle of back section: 0~80 (±5 ) Angle of leg section: 0~40 (±5 ) Hospital Beds & Stretchers P28

34 DIAMOND SERIES TM - Single Tier Horizontal Headwall Features & Benefits: Area Of Use: Medical Architectural Solutions Ergonomically placed medical gases and electrical services Adapts easily for varying acuity levels Customizable to meet facility requirements Two full length, fully functional integrated equipment management tracks to organize extra equipment and resources (Choice of standard type Dovetail or optional Fairfield Rail) Various laminate colors available to match any room décor Ability to accommodate almost any layout of medical gas outlet, electrical and communication devices Built with internal raceways for electrical and gas separation Available in single and double tier configurations Integrated room and reading light (optional) CE, HTM, NFPA, UL, and cul compliant Patient Rooms ED/ Trauma PACU ICU NICU Special Procedure Available Laminate Colors: *Additional laminate colors available upon request Blossom Cherry Smoky Brown Pear Espresso Pear Solutions Start Here P29

35 Key Features: 1. Fire retardant antimicrobial endcap Technical Drawing: Diamond Series 1 Tier Headwall Surfacemount 84" SMP-DSHW-1T Integrated room and reading light (single or dual) 3. Dovetail or Fairfield rail 4. Pull chain switch or Décora light switch Wild Cherry Natural Oak Acajou Mahogany Medical Architectural Solutions P30

36 QUARTZ SERIES TM - Patient Service Console Unit Features & Benefits: Area Of Use: Medical Architectural Solutions Smart profile design with infection control measures Sleekest profile available in the industry Customizable to any desired length Various laminate colors available to match any room décor Removable front fascia for ease of installation and maintenance Anodized aluminum front fascia Galvanized steel back box Multiple back box service knock outs Adjustable side mounting brackets Smart spacing solutions with single cut out dimension for all accessories: Electrical devices are 2.5 (63.5 mm) center to center between services Medical gas outlets and slide brackets are 5.0 (127.0 mm) center to center between services CE, HTM, NFPA, and UL Compliant Patient Rooms ED/ Trauma PACU ICU NICU Special Procedure Available Laminate Colors: *Additional laminate colors available upon request Blossom Cherry Smoky Brown Pear Espresso Pear Solutions Start Here P31

37 European configuration with Blossom Cherry laminate North American configuration with Espresso Pear laminate Technical Drawing: Wild Cherry Natural Oak Quartz Series Patient Care Console Unit Recessed SMP-CON-RC-13G Medical Architectural Solutions P32

38 ORION SERIES TM The innovative Orion Series over bed light provides an aesthetically pleasing design to any care facility. The luminaire features a unique direct and indirect light to meet the requirements of an acute care or general patient room. The Orion Series is manufactured with the highest safety and infection control measures making this light a preferred choice of healthcare professionals today. Examination Light Reading Light Ambient Light Night Light Features & Benefits: Medical Architectural Solutions Housing T lightweight extruded aluminum Option of color powder coat or anodized aluminum finish Fire retardant, impact and scratch resistant injection molded plastic end caps Optional antimicrobial AGION finish also available Electrical Built-in LED light driver Quick connect and disconnect circuits Electronic Ballast compatible to volts Emergency shut off switch in case of accidental impact Lens Designed to accommodate the latest and most efficient lamps and ballasts Fire retardant acrylic material High performance extruded shatter resistant linear acrylic lens with internal flutes Smooth exterior for ease of maintenance Gently fluted inner surface provides even dispersion of light and reduces glare Lens comes in clear or frosted finish. To order your Orion Series overbed light please contact your local SMP rep for further details. Solutions Start Here P33

39 FAIRFIELD RAIL The SMP Fairfield rail system offers unique benefits to healthcare providers in terms of expandability, flexibility, adaptability, productivity, ergonomics and aesthetics. Features & Benefits Customizable lengths to meet facility requirements The rail system is easy to install Various laminate colors available to match any room décor Rail can be replaced easily Caregivers can set up the rail system to support preferences and to meet facility-wide protocols Helps improve work place productivity Work space setup can be changed instantly, without tools Ordering Guide Available Laminate Colors S M P - F R L - X X X Natural Birch 2. Oiled Olivewood 3. Espresso Pear Example SMP - FRL Size of rail: 120 inches Length of rail in Inches *Additional laminate colors available upon request * NOTE: Rail comes standard with Antique White laminate. For additional colors please contact your sales rep. P34

40 INFINITE SERIES TM Vertical Flatwall The Infinite Series headwall is designed to eliminate space limitations encountered in facilities today. It has proven to be an efficient way to streamline your patient services in a unique vertical configuration at the bedside. Features & Benefits: Easily accessible for caregivers, no reaching over patients Customizable to service two beds This vertical headwall can be customized for services in a variety of configurations Available in any width or length, with many surface laminate color finishes to choose from Two accessory rails that can accommodate a wide variety of accessories Piping and wiring manifolded to a single point connection Removable front panels for easy maintenance Available in recessed or surface mount Medical Architectural Solutions Patent pending customizable built in light (Optional) Area Of Use: ICU LDR NICU Available Laminate Colors: Emergency Room Patient Recovery Room 1. Blossom Cherry 2. Espresso Pear Oiled Olivewood Curved Profile Integrated Accessory Rails Built In Light (Optional) *Additional laminate colors available upon request 4. Natural Birch Solutions Start Here P35

41 TOWER SERIES TM Power Column The Tower Series system is an effective space saving solution for any critical care area. Its unique design allows for adaptability to any room requirement. Features & Benefits: Centralized services give staff easy access to the patient Each column is custom built to suit specified needs of the hospital The multi-rail vertical system provides the hospital team with flexibility to adapt accessories to different situations Proven to be a valuable use of space, efficient manager of services and equipment Available in a wide range of laminate colors, sizes and configurations 360 services access Removable front panels for easy maintenance Piping and wiring manifolded to a single point connection Patent pending customizable built in light (Optional) Side View Area Of Use: ICU Emergency Room NICU Patient Recovery Room Available Laminate Colors: 1. Wild Cherry 2. Acajou Mahogany Oiled Olivewood Medical Architectural Solutions Curved Profile Integrated Accessory Rails Built In Light (Optional) *Additional laminate colors available upon request 4. Natural Oak P36

42 BED BUMPER The SMP Bed Bumper is an economical way to provide protection for both, the bed and the wall while properly positioning the bed. Features & Benefits: Medical Architectural Solutions Sleek design Allows caregivers to properly align the bed Available in different sizes Custom colors available for Vinyl covers & End caps Made from continuous 6063-T5 aluminum End caps made of injection molded thermoplastics Smooth surface allows for easy cleaning & infection control Solutions Start Here P37

43 BED DOCKER The SMP Bed Docker is uniquely designed to prevent damage to hospital beds and walls, while providing exceptional aesthetics to a patient s room. Features & Benefits: Angled receptacles on both sides protect connections from high-low bed positioning The bed locator can be equipped with both normal power and emergency power, telephone jack, communication system receptacle, bed receptacle, dedicated night light and low voltage controller The unit holds up to eight devices angled to be easily accessible by caregivers Various color options available to match room décor Can be fully integrated with any headwall system Available Laminate Colors: *Additional laminate colors available upon request Natural Birch Oiled Olivewood Espresso Pear Cocoa Maple Smoky Brown Pear Acajou Mahogany Medical Architectural Solutions P38

44 Overbed Tables SMP-400-OBT Width : 40 x 80 cm Height Range : cm Laminate Surface Overbed table with Gas / Spring Mechanism Lockable castors SMP-404-OBT Width : 42 x 80 cm Height Range : cm ABS Plastic Surface ABS Overbed table with Gas / Spring Mechanism Lockable castors SMP-405-OBT Width : 40 x 76.5 cm Height Range : cm Compact Laminate Surface (HPL) Overbed table with Gas / Spring Mechanism Lockable castors Available Colors SMP-406-OBT Width : 40 x 76.5 cm Height Range : cm Compact Laminate Surface (HPL) Overbed table with Gas / Spring Mechanism Lockable castors SMP-407-OBT Width : 40 x 76.5 cm Height Range : cm Compact Laminate Surface (HPL) Overbed table with Gas / Spring Mechanism Lockable castors Solutions Start Here P39

45 Patient Room Seating SMP offers a superior patient room seating selection to enhance virtually any healthcare space. Our option of recliners and loveseat sleepers are manufactured to provide the highest standard in performance, comfort and style. Keeping the needs of overnight guests in mind, SMP is surely to provide a solution that is just right. SMP-503-ACB Sitting Position Width : 72 cm Ergonomic & smart design Depth : 94 cm Easy to clean leather cover Height: 106 cm Easy to maneuver Adjustable to up to 175 angle SMP-500-ACB Sitting Position Width : 75 cm Depth : 88 cm Sleek design Easy to maneuver Bed Position Width : 75 cm Depth : 197 cm SMP-505-ACB Sitting Position Width : 78 cm Depth : 88 cm Bed Position Width : 75 cm Depth : 197 cm P40

46 Bedside Cabinets SMP-301-BSC Width : 50 cm Depth : 40 cm Height: 79 cm Laminated chipboard body Single drawer Single cupboard Cross lockable castors SMP-302-BSC Width : 43 cm Depth : 48.5 cm Height : 76.5 cm Laminated body Single drawer Single large drawer Cross lockable castors SMP-305-BSC Width : 52 cm Depth : 43 cm Height: 83 cm Laminated chipboard body supported with aluminum profile ABS plastic top surface Single drawer Single large drawer Cross lockable castors Solutions Start Here P41

47 SMP BSC SMP-306-BSC SMP-306S-BSC Width : 52 cm Width : 52 cm Width : 45 cm Depth : 47.5 cm Depth : 47.5 cm Depth : 45.5 cm Height : 83.5 cm Height: 82 cm Height: 83 cm Laminated chipboard body supported with aluminum profile ABS plastic top surface 2 drawers Single large drawer Cross lockable castors Cooling Capacity Laminated chipboard body Single drawer Cross lockable castors Fridge (35 L.) Steel body supported with aluminum profile Compact Laminate Surface (HPL) material top surface HPL front panel HPL drawer HPL drawer with ABS plastic separator Bedside Cabinets Fridge (35 L.) Cross lockable castors P42

48 SMP-307-BSC SMP-307S-BSC SMP-308-BSC Width : 46 cm Width : 45 cm Width : 46 cm Depth : 47 cm Depth : 45.5 cm Depth : 47 cm Height: 85 cm Height: 77 cm Height: 85 cm Steel body supported with aluminum profile Steel body supported with aluminum profile Steel body supported with aluminum profile Bedside Cabinets Compact Laminate Surface (HPL) material top surface HPL front panel HPL drawer with ABS plastic separator Cross lockable castors Compact Laminate Surface (HPL) material top surface HPL front panel HPL drawer with ABS plastic separator Cross lockable castors Compact Laminate Surface (HPL) material top surface HPL front panel HPL drawer with ABS plastic separator Cross lockable castors Solutions Start Here P43

49 SMP-308S-BSC SMP-4901-BSC SMP-4902-BSC Width : 45 cm Width: 48.5 cm Width: 48.5 cm Depth : 45.5 cm Depth: 48.5 cm Depth: 48.5 cm Height: 77 cm Height: 77 cm Height: 77 cm Steel body supported with aluminum profile Compact Laminate Surface (HPL) material top surface HPL front panel HPL drawer with ABS plastic separator Cross lockable castors ABS construction Kettle base Towel hangers located on both sides Available Colors: Blue, Green, Dark Grey, White Towel hangers located on both sides Pull-out food tray 2 inch castors for easy maneuverability Available Colors: Blue, Green, Dark Grey, White Bedside Cabinets P44

50 SMP-4903-BSC SMP-4904-BSC SMP-4905-BSC Width: 48.5 cm Width: 48.5 cm Width: 48.5 cm Depth: 48.5 cm Depth: 48.5 cm Depth: 48.5 cm Height: 90 cm Height: 90 cm Height: 77 cm ABS construction ABS construction ABS construction Pull-out food tray Pull-out food tray Cup and Thermometer repository Shoe shelf Shoe shelf Pull-out food tray Bedside Cabinets Kettle base Available Colors: Blue, Green, Dark Grey, White Kettle base 2 inch castors for easy maneuverability Available Colors: Blue, Green, Dark Grey, White Towel hangers located on both sides Available Colors: Blue, Green, Dark Grey, White Solutions Start Here P45

51 SMP-4906-BSC SMP-460-BSC SMP-470 -BSC SMP-500-BS Width: 48.5 cm Width: 49 cm Width: 48 cm Width: 53 cm Depth: 48.5 cm Depth: 49 cm Depth: 48 cm Depth: 52 cm Height: 77 cm Height: 80 cm Height: 75 cm Height: 72 cm ABS construction Cup and Thermometer repository 2 inch castors for easy maneuverability Pull-out food tray Available Colors: Blue, Green, Dark Grey, White Stainless Steel construction, ABS top Pull-out shoe shelf 2 inch castors for easy maneuverability Metal frame construction, ABS components Towel hangers located on both sides Pull-out shoe shelf 2 inch castors for easy maneuverability Kettle base inside the cabinet Metal frame construction, ABS components Towel hangers located on both sides Pull-out food tray Pull-out shoe shelf 2 inch castors for easy maneuverability Bedside Cabinets P46

52 Medicine Trolleys SMP-850EB Width: 85 cm Depth: 52 cm Height: 101 cm Aluminum-Alloy, ABS plastic and stainless steel construction 5 layers of drawers Stainless steel top plate Equipped with: 2 waste bins, needle disposal container, sliding side board, transparent filing box, oxygen cylinder holder, CP board & IV pole 4 swivel noiseless castors with brakes SMP-850M Width: 85 cm Depth: 52 cm Height: 101 cm Aluminum-Alloy, ABS plastic and stainless steel construction 6 layers of drawers with lock key system 50 medicine boxes in each drawer Equipped with: 2 garbage bins, transparent filing box, sliding side board, hanging device with 5 hooks 4 swivel noiseless castors with brakes SMP-700A Width: 76 cm Depth: 58.5 cm Height: 101 cm Aluminum-Alloy, ABS plastic and stainless steel construction 42 case-history folder compartments with lock key system One multi-purpose sliding drawer Light weight 4 swivel noiseless castors (2 with brakes) Solutions Start Here P47

53 SMP-700C Width: 76 cm Depth: 58.5 cm Height: cm Aluminum-Alloy, ABS plastic and stainless steel construction 6 layers of small drawers & 3 layers of big drawers Drawers contain various medicine boxes for different storage purposes 4 swivel noiseless castors (2 with brakes) SMP-700D Width: 85 cm Depth: 65 cm Height: 110 cm Aluminum-Alloy, ABS plastic and stainless steel construction Equipped with: 2 sliding side boards, IV pole with 8 hooks, 2 storage shelves below large multipurpose drawer 4 swivel noiseless castors (2 with brakes) SMP-800A Width: 73.5 cm Depth: 60 cm Height: 105 cm Aluminum-Alloy, ABS plastic and stainless steel construction Marble surface Equipped with: 6 layers of drawers with 10 dividers in each drawer for medicine storage, waste-storage bin at the bottom of trolley 4 swivel noiseless castors with central-locking braking system P48

54 Secondary Medical Products Canada 10 Sims Crescent, Richmond Hill Ontario, L4B-1K9 Canada Tel: (905) Fax: Distributed By: PART NUMBER: CA-COR-48-NA-X.X 05.12