Product Sales Guide. FX range High spin, freestanding washer extractors. Version: 1.6

Transcription

1 Product Sales Guide FX range High spin, freestanding washer extractors Version: 1.6

2

3 FX range design

4 Cabinet Standard: Top panel: stainless steel Front panel: painted Ornamental plate: galvanized coating Option: Front panel: stainless steel AISI 304 Side panels: stainles steel

5 Side panels Painted side panels Reinforcement in side panels for extra strenght: - U-profile: FX65/80/105 1x FX135/180/240/280 2x

6 Cross and bearing house Modular bearing house design Star shape cast steel out of 1 piece: - Sandblasted and degreased Red painted 1+1 bearing on model FX65/80/105/240/ bearing on model FX135/180 Advantage: Long life span & easy service

7 Bearing house construction Bearing house is mounted at back of the tub inside the frame shell Vibrations are optimally diverted to the suspension Frame shell Bearing house Outer tub

8 Bearings High quality bearings SKF: - Ball bearings - Roller bearing (FX280) FX180 bearings Advantage: Easy to replace bearings

9 Drain Directly under the tub: - Low water consumption - No wasted chemicals Standard 3 drain valves: - Small objects are evacuated 90 drain valve: - Auto-rinsing effect behind the valve Drain under tub Easy service: - Access from the front of machine 2 nd drain valve optional for water recuperation Option: - Drain pump for FX65 and FX80

10 Suspension Soft springs for high G-force Optimized balance: - No anchoring required Frontal suspension FX65/80/105/135 Easy installation Frontal double suspension FX180/240/280 Side suspension FX135/180 Side suspension FX240/280

11 Pulley FX FX Main pulley: Aluminium Motor pulley: Black steel Easy service

12 Water inlets Standard 2 inlet valves Optional 3 rd Standard cool down ¾ inlet valves Water inlets FX280 is equiped with 2 high capacity water inlets (option for FX ) Easy to remove filter without having to remove the valve: service friendly High capacity water inlets

13 V-belts 1 micro V-belt per machine FX65-80: V-belt with 6 ribs V-belt on motor drive FX : V-belt with 8 ribs FX : V-belt with 10 ribs Belts are mechanically tensioned by bolt Close up V-belts

14 Tilt switch 1 out of balance switch positioned below the tub in the front Steel spring is activated during high unbalances Is positioned in the factory With extreme unbalances: - The machine will repeat maximum 10 times (is not changeable) Activated when unbalances occur during: - Low spin - High spin Tilt switch Note: During installation & service always check if the tilt switches are well positioned

15 Soap box 4 compartments on middle of the top - 2 for powder and 2 for liquid soap Scandinavian design Ergonomical position: - Front and center Easy service: - 4 compartments next to each other: No confusion Soap box Lid of soap box

16 Soap box Anti-damage protection - Rubber top of soap box is fully flexible, thus preventing any damage during handling

17 Soap box connection to the tub No agressive chemicals directly on the linen Chemicals enter the tub between the back plate of the tub and the drum

18 Soap box - mixer Soap mixer is a standard feature on FX line Liquid soap pumps can be connected to the mixer Mixer Chemicals are diluted before entering the tub No hot water directly on the linen Liquid soap connection

19 Easy-Soap Easy soap is an option on the FX line Electrical board with connection to the liquid soap inlets is added Easy service: - Machine remains unopened For fixation plastic box with PCB board and 8 LED please unscrew cover on rear bridge

20 Easy-Soap Up to 13 liquid soap pumps possible, connected to the soap box by hose: - 2x Ø19mm - 3x Ø14,5mm - 8x Ø11,5mm Connected to liquid soap (inlets are parts of mixer) No hot water directly on the linen Holes of the liquid soaps inlets must be drilled through the detergent suppliers according to their requirements

21 Inner drum 3 lifting ribs for ideal mechanical action Stainless steel AISI 304 Perforated ribs ( PowerWash ) New perforation ( Cascade ) Rib in inner drum FX65 FX80 FX105 FX135 FX180 FX240 FX280 Volume (l) 65 77,2 105,6 135, Capacity (kg) Diameter (mm) Depth (mm)

22 Inner drum - Cascade Extraction over 400G*» not sticky linen to the drum More perforations» optimized water evacuation Less residual water» lower rest humidity Cascade shape of holes» better washing results * FX280 has 350 G-factor

23 Motor Frequency controlled drive New motor: - Higher torque - High extraction speed - Lower noise - Less unbalances Motor FX65 FX80 FX105 FX135 FX180 FX240 FX280 Motor power (kw) 0,75 0,75 1,1 1,5 2,2 3 3 Wash speed (rpm) Extraction speed (rpm) Noise - wash db(a) Noise - extraction db(a) 63 63,6 66,

24 Shafts Special black steel for Xtreme strength Oversized diameters Welded on the drum for long life span Shaft (FX65-135) Shaft (FX )

25 Frames Zinc plated steel Connected by CLINCH technology (not welded)

26 Frames - Clinch technology New technology Not welded Stronger assembly of parts First time use on FX platform

27 Clinch technology - Benefits Strength of the connections is same as by spot welding Connection does not rust Increasing productivity Shorter lead times

28 Outer tub High quality stainless steel AISI 304 Easy assembly of front panel Outer tub (FX65-135) Rubber seal with O cross section Outer tub (FX ) Outer tub seal Outer tub seal

29 Door handle, door lock Ergonomic door knob for easy opening Door knob Scandinavian design Strong overdimensioned door lock for safety Door lock

30 Door handle, door lock Safety system to protect destroying of the handle during operation - System (due to the possibility of slipping in both extreme positions) prevents accidental damage when using greater force

31 Door Easy loading & unloading Xtreme big door openings Opening to 180 FX65 FX 80 FX 105 FX 135 FX 180 FX 240 FX 280 Door opening (mm) Door material Al Al Al Al Al Al Al Floor to door (mm)

32 Door comparison* FX65: FX135: FX180: FX280: Primus Miele Electrolux Primus Electrolux Girbau Miele Primus Electrolux Girbau Image Primus Image Electrolux UniMac FX65 FX 80 FX 105 FX 135 FX 180 FX 240 FX280 Door diameter (mm) Electrolux IPSO Girbau UniMac Image Miele 300 n/a * according to available data

33 Hinges Oversized hinges for long life span Integrated in the new design Hinges Close up hinges Open door hinges Open door hinges

34 Control panel Easy access to control board Top panel doesn t have to be removed Safe for coin op version Half open facia Open facia

35 Control panel 20 angled stainless steel panel with foil (support plate from foil is Aluzink) XControl: XControl+:

36 Coin operated Electronical or mechanical coin meter Coin box Large integrated coin box Central payment as an alternative Coin box facia panel

37 USB Connection inside the machine or at rear panel (option) Export programmes from the machine Import* programmes to the machine Copy of the machine settings from machine (machine parametres) Import machine settings and programmes to the machine (created in TraceTech) Simple firmware update Inside the machine: (standard) Back side of the machine: (option) * You can copy and import programmes just from the same model of washer for example from FX80 just to FX80

38 XControl 7 buttons + 2 hidden Hidden navigation buttons (for menus) Extra functions selection Guiding information Navigation Select Cancel Start Graphical display - Anti-reflexive foil (sunshine) - Anti-vandal protection

39 XControl Well-arranged screens for simple control 1. Program selection 2. Soap information 3. Price information 4. Run information

40 XControl Main features Wash programs 15 free adaptable programs (5 in Coin version) Factory pre-programmed programs: - 5x Intensive - 4x Standard - 4x Eco - 2x Extraction Extra wash / drain steps: - Spray - Static drain - Cool down - Reverse drain - Soak Possibility to update wash programs: - Manually on machine - Through USB memory stick - With PC and TraceTech SW

41 XControl Main features Wash process Consumption (water, energy) reduction by: - Precise water level measurement (step 0,1 unit) - Exact temperature measurement (step 0,1 C) New spin sequence to reduce residual humidity

42 XControl Main features TraceTech connection Washer management tool TraceTech SW: - Machine set-up - Wash programs update - Monitoring + alarms ( s, SMS) - Traceability - Location management - Sales overview - Reports, statistics Connection: - Wired RS485 - Wireless WiFi

43 XControl Main features Other Extra functions: Prewash, Soak, No spin, Gentle wash, Delay start Texts can be shown in 20 languages 8 liquid soap signals (7 signals with Central payment system) Ready for connecting water recycling kit Buzzer signal to inform about significant events (end of cycle, error,..) Simple firmware update through USB memory stick

44 XControl+ 21 buttons Navigation Stop Numeric keypad Detail program information Navigation Select Cancel Start Graphical display - Anti-reflexive foil (sunshine) - Anti-vandal protection

45 XControl+ Additional features Up to 99 programs Factory pre-programmed settings: - 5x Intensive - 4x Standard - 4x Eco - 2x Extraction - 5x Special (Sport, Mops, Jeans,..) - Semi-automatic weighing

46 Programmes No. Name Temp. C Description Prewash Rinses 1 Hot wash - Intensive 90 Normally to heavily soiled laundry. Good temperature for white and light coloured cotton, such as bed linen Yes 3 2 Warm wash - Intensive 60 Normally soiled laundry. Good for clothes worn next to skin Yes 3 3 Color wash - Intensive 40 Normally soiled laundry, whites and colors Yes 3 4 Bright - Intensive 30 5 Woolens 15 For delicate blended materials and permanent press cotton. Suitable for shirts and blouses A gentle laundry program for wool, silk and garments that should be washed by hand. Short spin No 3 No 3 6 Hot wash - Standard 90 Normally to heavy soiled laundry with less water consumption No 3 7 Warm wash - Standard 60 Normally soiled laundry with less consumption No 3 8 Color - Standard 40 Normally soiled laundry, whites and colors. With less water consumption No 3 9 Bright - Standard 30 For delicate blended materials and permanent press cotton. Suitable for shirts and blouses. With less water consumption No 3 10 Eco hot 90 Ecology program for normal to heavy soiled laundry No 2 11 Eco warm 60 Ecology program for normal soiled laundry No 2 12 Eco color 40 Ecology program for normal soiled laundry, whites and colors No 2 13 Eco bright 30 Ecology program for delicate blended materials and pernament press cotton. Suitable for shirts and blouses No 2 14 Low spin - Extraction Suitable for laundry that just needs to be dampened No 1 15 High spin - Extraction Suitable for laundry that just needs to be dampened No Special (only ) Special programmes for sport garments, jeans, mops, etc

47 Washing results Comparison of washing results - program No.11 (60 C Eco) - A gentle laundry program for wool, silk and garments that should be washed by hand FS7 FX80 Difference Wash water (l) 30,2 26,1-15,71% Total water (l) 68,73 51,9-32,43% Energy (kwh) 1,88 1,43-31,47% Time (min) 0:38:20 0:49: ,12% Spin speed (rpm) ,88% Rest humidity (%) 63,8 49,9-27,86% Temperature ( C) 55,83 55,3-0,96% * Tested i TZÚ Brno

48 Seal 3 radial seals FKM 1 hardened sleeve Long life span Easy service: - Quick replacement time Seals Detail of seal

49 Safety FX machines correspond to all CE and EMC directives, WRAS approval Noise level below 65 db Standard: Emergency button (none on coin and CPS machines) One mainswitch Buzzer signal at end of cycle Emergency button Main switch

50 Heating - Electrical Positioned in front of machine Easy access for quick service Heating elements in the front Short wash cycles Heating element (FX65-135) Heating element (FX ) FX65 FX80 FX105 FX135 FX180 FX240 FX280 kw 6 / 9 (4,6) 6 / 9 (4,6) 6 / 9 / 12 9 / /

51 Heating - Steam Steam injector Steam opening Direct steam 1-8 bars Positioned in the back Combination with electrical heating is possible Switch between steam and electrical heating is on the back panel

52 Voltages FX65 FX80 FX105 FX135 FX180 FX240 FX280 Electrical / steam / hot water Steam / hot water 3x V+N 50/60Hz 3x V 50/60Hz 3x V 50/60Hz 3x V 50/60Hz 3x V 50/60Hz 1x V 50/60Hz 1x V 50/60Hz

53 Transport Net weight Gross weight Dimensions (HxWxD*) Transport dimensions (HxWxD*) Volume (kg) (kg) (mm) (mm) (m 3 ) FX x710x x735x775 0,74 FX65 FX x710x x731x825 0,74 FX80 FX x795x x816x825 0,9 FX105 FX x795x x816x970 1,06 FX135 FX x970x x1110x1100 1,95 FX180 FX x970x x1110x1235 2,18 FX240 FX x970x1185 n/a n/a FX280

54 Overview

55 Overview

56 Eco 3 wash technology 20% less energy consumption 15% less water consumption 25% less residual moisture

57 Saving calculation - Eco3

58 Saving calculation additional drying

59 Approvals and Technology CE WRAS CSA / UL

60 Ultra Balance Technology Unbalance detection system especially for FX range Ultra Balance detects any unbalance and adapts the spin speed accordingly Adavantages: - the machine is optimally protected against unbalances, which results in a longer lifetime - the noise level is reduced even more - optimised stability during the entire cycle - mechanical tilt switch remains as extra protection

61 FX creating team FX team - Engineering Objective: - Brand new range of washer extractors - Combine design and efficiency - Continue in Xtreme Concept - Develop new patents - Be the best on the market New assembly line for FX Use of new CLINCH technology Tested and certified by Research Institute

62 Design cooperation Scandinavian design References: - Bang & Olufsen A/S - Jamo A/S - Nortec Systems A/S - Vestfrost A/S Industrial design: - Assembly - Installation - Service after sales

63 Distributors involvement Interviews with end users Technical input from distributors Product made to the market demands

64 Marketing support Succesful presentation at ExpoDetergo New design for FX Tech Spec Special FX brochure

65 Markets Hospitality & Wellness Care & Treatment Laundry Others

66 Discover the Primus website Language versions: English French Dutch Czech Russian German Italian Spanish Chinese Follow us on:

67 FX video Watch the FX video on:

68 * This is a non-binding and indicative tool made available to Primus distributors for internal use only. Proprietary rights with regard to this tool belong to Primus CE s.r.o. No guarantee can be given that its results are up-to-date and accurate and it should therefore be used with particular circumspection. This tool should by no means be transmitted to any third party or otherwise made public. Please inform Primus marketing team of any remark you have in respect of this tool Primus CE s.r.o. All rights reserved.