Breathing air purification unit

Size: px

Start display at page:

Download "Breathing air purification unit"

Betty Flynn
5 years ago
Views:

1 Breathing air purification unit breathing star BS-MT multitronic

Adsorption Dryer breathing star BS-MT multitronic Breathing air for industrial applications Compressed air used as breathing air in industrial applications means savely providing people with highly

2 Adsorption Dryer breathing star BS-MT multitronic Breathing air for industrial applications Compressed air used as breathing air in industrial applications means savely providing people with highly purified quality breathing air. This breathing air is free from effects of the working environment. We offer the market for the industrial breathing air sector proven adsorption technology, with a high emphasis on safety in regard to maximum allowable impurity concentrations depending on specific country regulations. Adsorption dryers of the BS-MT series are eminently suitable as breathing air purification units for industrial applications by virtue of exactly matched purifying steps: - Prefilter 1 st stage filters condensate down to 0.01 mg/m³ - Adsorption phase A adsorbs moisture - Adsorption phase B reduces CO₂ fractions - Cleaning 1st stage eliminates oil components - Catalyst stage converts CO to CO₂ - Cleaning 2nd stage reduces CO₂ - Postfilter filters solid particles Maximum allowable concentrations for breathing air Europe EN UK BS4275 USA ANSI/CGA Australia AS 1715 with BS-MT Carbon monoxide CO < 15 ppm < 5 ppm < 10 ppm < 10 ppm < 2 ppm Carbon dioxide CO₂ < 500 ppm 500 ppm 1000 ppm 800 ppm up to 150 ppm Pressure dew-point* H₂O < 5 C < 5 C < 10 F < 100 mg/m³ < -40 C Residual Oil content < 0,5 mg/m³ < 0,5 mg/m³ < 0,5 mg/m³ < 1,0 mg/m³ < 0,003 mg/m³ Oxygen concentration O₂ 21 (±1) % % 21,5 % 20,8-21,1 % Odour and flavour substances free free free free free *under inlet temperatures

3 Adsorption Dryer breathing star BS-MT multitronic Breathing air purification series BS-MT Compressed air from the compressor contains impurities such as solid particles, condensate, oil components, odour and flavour substances and other harmful gases. The breathing air purification unit series BS-MT dependably removes and reduces these components from the compressed air. The microfilter series XP reliably removes solid and liquid impurities with 0.01 µm and 0.01 mg/m³ filtration efficiency. The compressed air saturated with moisture is then fed into the dryer. For the adsorption the air flows through the adsorption chamber from the bottom to the top. A special desiccant retains the moisture and reduces the fraction of the various gases which could be harmful to the human organism. Dry clean compressed air leaves the adsorption dryer. Parallel to the adsorption, regeneration takes place in the second adsorption chamber. A partial flow of decompressed dried regenerating air flows through the adsorber which is to be regenerated in counterflow, removes the moisture and then released into the open atmosphere via the downstream muffler. The continual pressure change in operation requires a pressure build-up during the cycles and guarantees a pulsation free switchover from regeneration to adsorption. The activated carbon catalyst charge of the downstream cleaning stage removes CO, CO 2, odour and flavour substances, oil vapours, various gas fractions and carbon monoxide. The universal filter retains any particles of the adsorbers. Features and utilisation The adsorption dryers of the BS- MT series for breathing air are characterised by the following features: Service life Filter element operating hours Desiccant operating hours Pressure dew-point down to 40 C Flow rate up to m³/h Pressure ratings up to 350 bar Exceeds international guidelines Lower operating costs Variable control Compressor control Suitable for operation and utilisation in the following sectors: Surface treatment technology and paintshops Pharmaceutical industry Fire brigades Disaster control Laboratories Chemical and petrochemical industries Tank cleaning and shaft construction Tunnel construction Mines Shipyards Diving industry

4 Technical Data Type Capacity*) m³/h Dimensions mm Width Height Depth Connection max. pressure bar BS-MT G 1/ BS-MT G 1/ BS-MT G 1/ BS-MT G 1/ BS-MT G 3/ BS-MT G 3/ BS-MT G 1/ BS-MT G BS-MT G BS-MT G BS-MT G BS-MT G 11/ BS-MT G 11/ BS-MT G 11/ BS-MT G BS-MT G * calculated at 1 bar (abs.) and 20 C at operating pressure 7 bar and 35 C inlet temperature for pdp -40 C. Electrical power supply: 230 VAC,115 VAC or 24 VDC. Power consumption: 40 Watt. Weight Kg Temperature C Conversion factor pressure/temperature Pressure bar(e) Operating pressure < 5 bar on request. Higher inlet temperatures on request. Design example Compressed air has to be purified Flow rate 380 m³/h Pressure 13 bar(e) Inlet temperature 40 C Pressure dew-point 40 C Dryer capacity = 380 1,47 Selected: BS-MT 35 = 258,3 m³/h BS-MT 1-8 BS-MT 10-95

Parker Worldwide AE UAE, Dubai Tel: +971 4 8127100 parker.me@parker.com AR Argentina, Buenos Aires Tel: +54 3327 44 4129 AT Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 parker.austria@parker.

6 Parker Worldwide AE UAE, Dubai Tel: parker.me@parker.com AR Argentina, Buenos Aires Tel: AT Austria, Wiener Neustadt Tel: +43 (0) parker.austria@parker.com AT Eastern Europe, Wiener Neustadt Tel: +43 (0) parker.easteurope@parker.com AU Australia, Castle Hill Tel: +61 (0) AZ Azerbaijan, Baku Tel: parker.azerbaijan@parker.com BE/LU Belgium, Nivelles Tel: +32 (0) parker.belgium@parker.com BR Brazil, Cachoeirinha RS Tel: BY Belarus, Minsk Tel: parker.belarus@parker.com CA Canada, Milton, Ontario Tel: CH Switzerland, Etoy Tel: +41 (0) parker.switzerland@parker.com CL Chile, Santiago Tel: CN China, Shanghai Tel: CZ Czech Republic, Klecany Tel: parker.czechrepublic@parker.com DE Germany, Kaarst Tel: +49 (0) parker.germany@parker.com DK Denmark, Ballerup Tel: parker.denmark@parker.com ES Spain, Madrid Tel: parker.spain@parker.com FI Finland, Vantaa Tel: +358 (0) parker.finland@parker.com FR France, Contamine s/arve Tel: +33 (0) parker.france@parker.com GR Greece, Athens Tel: parker.greece@parker.com HK Hong Kong Tel: HU Hungary, Budapest Tel: parker.hungary@parker.com IE Ireland, Dublin Tel: +353 (0) parker.ireland@parker.com IN India, Mumbai Tel: IT Italy, Corsico (MI) Tel: parker.italy@parker.com JP Japan, Tokyo Tel: +81 (0) KR South Korea, Seoul Tel: KZ Kazakhstan, Almaty Tel: parker.easteurope@parker.com MX Mexico, Apodaca Tel: MY Malaysia, Shah Alam Tel: NL The Netherlands, Oldenzaal Tel: +31 (0) parker.nl@parker.com NO Norway, Asker Tel: parker.norway@parker.com NZ New Zealand, Mt Wellington Tel: PL Poland, Warsaw Tel: +48 (0) parker.poland@parker.com PT Portugal, Leca da Palmeira Tel: parker.portugal@parker.com RO Romania, Bucharest Tel: parker.romania@parker.com RU Russia, Moscow Tel: parker.russia@parker.com SE Sweden, Spånga Tel: +46 (0) parker.sweden@parker.com SG Singapore Tel: SK Slovakia, Banská Bystrica Tel: parker.slovakia@parker.com SL Slovenia, Novo Mesto Tel: parker.slovenia@parker.com TH Thailand, Bangkok Tel: TR Turkey, Istanbul Tel: parker.turkey@parker.com TW Taiwan, Taipei Tel: UA Ukraine, Kiev Tel parker.ukraine@parker.com UK United Kingdom, Warwick Tel: +44 (0) parker.uk@parker.com US USA, Cleveland Tel: VE Venezuela, Caracas Tel: ZA South Africa, Kempton Park Tel: +27 (0) parker.southafrica@parker.com European Product Information Centre Free phone: (from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE, IL, IS, IT, LU, MT, NL, NO, PT, SE, SK, UK) Ed Parker Hannifin Corporation. All rights reserved. BROBSMT-01-EN Parker Hannifin Corporation ZANDER Aufbereitungstechnik GmbH Im Teelbruch 118 D Essen Tel: +49 (0) Fax: +49 (0) Your local authorized Parker distributor

Electronic Condensate Drains. ecodrain ED series for compressed air and industrial gases

Electronic Condensate Drains. ecodrain ED series for compressed air and industrial gases Electronic Condensate Drains ecodrain ED series for compressed air and industrial gases Electronic Condensate Drains ecodrain ED3000 series Features and Advantages Electronic condensate drains of the ecodrain