Maskinsäkerhet Säkerhetskrav för fluidsystem och deras komponenter Pneumatik

Size: px

Start display at page:

Download "Maskinsäkerhet Säkerhetskrav för fluidsystem och deras komponenter Pneumatik"

Ethan King
5 years ago
Views:

1 SVENSK STANDARD SS-EN 983+A1:2008 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 1 Språk/Language: engelska/english ICS: ; ; Maskinsäkerhet Säkerhetskrav för fluidsystem och deras komponenter Pneumatik Safety of machinery Safety requirements for fluid power systems and their components Pneumatics SWEDISH STANDARDS INSTITUTE

2 Hitta rätt produkt och ett leveranssätt som passar dig Standarder Genom att följa gällande standard både effektiviserar och säkrar du ditt arbete. Många standarder ingår dessutom ofta i paket. Tjänster Abonnemang är tjänsten där vi uppdaterar dig med aktuella standarder när förändringar sker på dem du valt att abonnera på. På så sätt är du säker på att du alltid arbetar efter rätt utgåva. e-nav är vår online-tjänst som ger dig och dina kollegor tillgång till standarder ni valt att abonnera på dygnet runt. Med e-nav kan samma standard användas av flera personer samtidigt. Leveranssätt Du väljer hur du vill ha dina standarder levererade. Vi kan erbjuda dig dem på papper och som pdf. Andra produkter Vi har böcker som underlättar arbetet att följa en standard. Med våra böcker får du ökad förståelse för hur standarder ska följas och vilka fördelar den ger dig i ditt arbete. Vi tar fram många egna publikationer och fungerar även som återförsäljare. Det gör att du hos oss kan hitta över 500 unika titlar. Vi har även tekniska rapporter, specifikationer och workshop agreement. Matriser är en översikt på standarder och handböcker som bör läsas tillsammans. De finns på sis.se och ger dig en bra bild över hur olika produkter hör ihop. Standardiseringsprojekt Du kan påverka innehållet i framtida standarder genom att delta i någon av SIS ca 400 Tekniska Kommittéer. Find the right product and the type of delivery that suits you Standards By complying with current standards, you can make your work more efficient and ensure reliability. Also, several of the standards are often supplied in packages. Services Subscription is the service that keeps you up to date with current standards when changes occur in the ones you have chosen to subscribe to. This ensures that you are always working with the right edition. e-nav is our online service that gives you and your colleagues access to the standards you subscribe to 24 hours a day. With e-nav, the same standards can be used by several people at once. Type of delivery You choose how you want your standards delivered. We can supply them both on paper and as PDF files. Other products We have books that facilitate standards compliance. They make it easier to understand how compliance works and how this benefits you in your operation. We produce many publications of our own, and also act as retailers. This means that we have more than 500 unique titles for you to choose from. We also have technical reports, specifications and workshop agreements. Matrices, listed at sis.se, provide an overview of which publications belong together. Standardisation project You can influence the content of future standards by taking part in one or other of SIS s 400 or so Technical Committees.

3 Europastandarden EN 983:1996+A1:2008 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN 983:1996+A1:2008. Denna standard ersätter SS-EN 983, utgåva 1. The European Standard EN 983:1996+A1:2008 has the status of a Swedish Standard. This document contains the official English version of EN 983:1996+A1:2008. This standard supersedes the Swedish Standard SS-EN 983, edition 1. Copyright/Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by!the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), tel Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. SIS Förlag AB, SE Stockholm, Sweden. Tel: Fax: sis.sales@sis.se Internet:

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 983:1996+A1 September 2008 ICS ; Supersedes EN 983:1996 English Version Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics Sécurité des machines - Prescriptions de sécurité relatives aux systèmes et leurs composants de transmissions hydrauliques et pneumatiques - Pneumatique Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an fluidtechnische Anlagen und deren Bauteile - Pneumatik This European Standard was approved by CEN on 11 March 1996 and includes Amendment 1 approved by CEN on 27 July CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 983:1996+A1:2008: E

6 SS-EN 983:1996+A1: A1:2008 (E) (E) Provläsningsexemplar / Preview Contents Page Foreword...3 Introduction Scope Normative references Definitions List of hazards Safety requirements and/or measures Basic requirements for the design and specification of pneumatic systems Additional requirements Site conditions Component removal Preparation for transportation Specific requirements for components and controls Motors and rotary actuators Cylinders Valves Energy transmission and conditioning System protection Sequence control Control systems with servo or proportional valves Silencers Verification of safety requirements and/or measures Inspection Testing Information for use Final data Maintenance data Marking Components Components within a system Ports Valve control mechanisms Internal devices...18 Annex A (informative) Bibliography...19 Annex ZA (informative)!relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"...21 Annex ZB (informative)!relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"

7 EN SS-EN 983:1996+A1: A1:2008 (E) Foreword This document (EN 983:1996+A1:2008) has been prepared by Technical Committee CEN/TC 114 Safety of machinery, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2009, and conflicting standards shall be withdrawn at the latest by December This document includes Amendment 1, approved by CEN on This document supersedes EN 983:1996. The start and finish of text introduced or altered by amendment is indicated in the text by tags! ". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).!For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." It was developed to contribute towards unification of safety regulations and procedures in the various member countries for each aspect dealt within the field of pneumatics for fluid power systems and their components. This Standard utilizes the most recently validated technical information from established technical sources (e.g. CEN, ISO, national standards and European documents). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 3

8 SS-EN 983:1996+A1: A1:2008 (E) (E) Provläsningsexemplar / Preview Introduction This standard is a type B2 standard (according to EN 292-1) and contains the general requirements for pneumatic systems and their components on machinery. For type C standard makers, it is a basis for the development of specific requirements on dedicated machines. If no type C standards are available, it is a basis for the manufacturers when constructing machines that include pneumatic systems and their components. In developing this standard, safety related requirements out of ISO 4414 were selected as well as additional safety related requirements. Equivalent safety requirements for hydraulic systems are defined in EN 982 "Safety of machinery Safety requirements for fluid power systems and their components Hydraulics". 1 Scope This standard applies to pneumatic systems and their components on machinery. It identifies hazards and factors which affect the safety of systems and their components when they are put to their intended use. Gas bottles and receivers are excluded from the scope of this standard. For receivers see EN The principles specified apply to the design, construction and modification of new systems and their components and aspects of use including: Assembly Installation Adjustment Operation Cleaning Maintenance. Components are covered in the standard but only to the extent that safety requirements are given to allow the components to be safely integrated into a system's design. The standard applies to systems and their components on machinery that are manufactured after the date of the adoption of this standard. 4

9 EN SS-EN 983:1996+A1: A1:2008 (E) 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 286-1, Simple unfired pressure vessels designed to contain air or nitrogen Part 1: Design, manufacture and testing. EN 292-1:1991, Safety of machinery - Basic concepts, general principles for design Part 1: Basic terminology, methodology. EN 292-2:1991, Safety of machinery - Basic concepts, general principles for design Part 2: Technical principles and specifications. EN 418, Safety of machinery Emergency stop equipment, functional aspects Principles for design. pren 954-1:1992, Safety of machinery - Safety related parts of control systems Part 1: General principles for design. pren 1050:1992, Safety of machinery - Risk assessment. ENV 1070, Safety of machinery Terminology. pren :1993, Safety of machinery Fire and explosions Part 1: Explosion prevention and protection. EN , Electromagnetic compatibility Generic emission standard Part 2: Industrial environment. pren :1994, Electromagnetic compatibility Generic immunity standard Part 2: Industrial environment. EN :1992, Safety of machinery - Electrical equipment of machines Part 1: General requirements (IEC 204-1:1992, modified). EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 529:1989). ISO , Fluid power systems and components Graphic symbols and circuit diagrams Part 1: Graphic symbols. ISO/DIS :1993, Fluid power systems and components Graphic symbols and circuit diagrams Part 2: Circuit diagrams. ISO 5598, Fluid power systems and components - Vocabulary. ISO/TR , Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning. 5

10 SS-EN 983:1996+A1: A1:2008 (E) (E) Provläsningsexemplar / Preview 3 Definitions For the purpose of this standard, the definitions of ENV 1070 and the following apply. Other definitions not included are given in ISO fluid power the means whereby signals and energy can be transmitted, controlled and distributed using a pressurized fluid as the medium 3.2 system arrangement of interconnected components which transmits and controls fluid power energy 3.3 component an individual unit (e.g. cylinder, motor, valve, filter) comprising one or more parts designed to be a functional part of a fluid power system 3.4 pneumatics science and technology which deals with the use of air or neutral gases as the fluid power medium 3.5 maximum working pressure the highest pressure at which the system or part of the system is intended to operate in steady-state conditions 3.6 rated pressure the highest pressure at which the component is intended to operate for a number of repetitions sufficient to assure adequate service life 3.7 operating device device that provides an input signal to a control mechanism (e.g. cam, switch) 3.8 control mechanism a device that provides an input signal to a component (e.g. lever, solenoid) 3.9 actuator component that transforms fluid energy into mechanical energy (e.g. motor, cylinder) 3.10 piping any combination of fittings, couplings or connectors with pipes, hoses or tubes which allows fluid flow between components 3.11 neutral gas a gas which has properties similar to air and does not react to the effects of pressure and/or temperature in a manner different to air 6

11 EN SS-EN 983:1996+A1: A1:2008 (E) 4 List of hazards The possible hazards associated with the use of pneumatic power in a machine are given in table 1: Hazard type 4.1 Mechanical hazards shape relative location mass and stability (potential energy of elements) mass and velocity (kinetic energy of elements) inadequacy of the mechanical strength accumulation of potential energy by: elastic elements (springs), or liquids or gases under pressure, or vacuum leakage Table 1 List of hazards EN 292-1:1991 Relevant clauses EN 292-2:1991 Annex A of EN 292-2: , 1.4, Relevant type B standard or clause in this standard 5.1.1, 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2.1, 5.2.2, 5.2.3, 5.3.1, 5.3.2, 5.3.3, , , , , 7.2, Electrical hazards 5.1.6, 5.2.1, a, EN Thermal hazards resulting in 5.1.8, burns and scalds, by a possible contact of persons, by flames or explosions and also by the radiation of heat sources 4.4 Hazards generated by noise 5.1.8, 5.2.1, Hazards, especially unintended , EN , pren movements, caused by electromagnetic fields Hazards generated by materials and substances processed, used and exhausted by machinery Hazards resulting from 5.1.9, , 7.1 contact with or inhalation of harmful fluids, gases, mists, fumes and dusts Fire or explosion hazards continued 7

Järnvägar Bromsindikatorer Del 1: Indikatorer för tryckluftsbromsar

SVENSK STANDARD SS-EN 15220-1:2008 Fastställd/Approved: 2008-11-06 Publicerad/Published: 2008-12-01 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 45.060.01 Järnvägar Bromsindikatorer Del 1: Indikatorer