Catalog Number. Notes

Transcription

1 Catalog Number FETURES & SPECIFICTIONS INTENDED USE Typical applications include corridors, lobbies, conference rooms and private offices. CONSTRUCTION Galvanized steel mounting/plaster frame; galvanized steel junction box with bottom-hinged access covers and spring latches. Reflectors are retained by torsion springs. Vertically adjustable mounting brackets with commercial bar hangers provide -/ total adjustment. Two combination ½ -/ and four ½ knockouts for straight-through conduit runs. Capacity: ( in, out). No. WG conductors, rated for C. ccommodates - joist spacing. Passive cooling thermal management for C standard; high ambient (C) option available. Light engine and drivers are accessible from above or below ceiling. Max ceiling thickness -/. OPTICS LEDs are binned to a -step SDCM; CRI minimum. LED light source concealed with diffusing optical lens. General illumination lighting with. S/MH and cutoff to source and source image. Self-flanged anodized reflectors in specular, semi-specular, or matte diffuse finishes. lso available in white and black painted reflectors. ELECTRICL Multi-volt (-V, /Hz) -V dimming drivers mounted to junction box, % or % minimum dimming level available. -V dimming fixture requires two () additional low-voltage wires to be pulled. % lumen maintenance at, hours. LISTINGS Certified to US and Canadian safety standards. Damp location standard (wet location, covered ceiling optional). ENERGY STR certified product. WRRNTY -year limited warranty. Complete warranty terms located at: Note: ctual performance may differ as a result of end-user environment and application. ll values are design or typical values, measured under laboratory conditions at C. Specifications subject to change without notice. Type OPEN and WLLWSH LED Non-IC New Construction Downlight DIMMLE + Capable options indicated by this color background. battery pack ORDERING INFORMTION Lead times will vary depending on options selected. Consult with your sales representative. Example: / LOR LSS MVOLT EZ Series Color temperature perture/trim Color Finish Voltage " round / K / K / K / K / K lumens lumens lumens lumens lumens lumens lumens lumens LO LW Downlight Wallwash R WR R Clear White lack LSS Semi-specular LD Matte diffuse LS Specular MVOLT Multi-volt V V V Driver Options GZ -V driver dims to % GZ -V driver dims to % EZ -V eldoled driver with smooth and flicker-free deep dimming performance down to % EZ -V eldoled driver with smooth and flicker-free deep dimming performance down to % SF TRW TRL EL ELR ELSD ELRSD EWCP EWCPR NPPD NPPDER Single fuse White painted flange lack painted flange Emergency battery pack with integral test switch Emergency battery pack with remote test switch Emergency battery pack with self-diagnostics, integral test switch Emergency battery pack with self-diagnostics, remote test switch Emergency battery pack, W Constant Power, C Title compliant with integral test switch Emergency battery pack, W Constant Power, C Title compliant with remote test switch nlight network power/relay pack with -V dimming for non-eldoled drivers (GZ, GZ). nlight network power/relay pack with -V dimming for non-eldoled drivers (GZ, GZ). ER controls fixtures on emergency circuit. N NPSEZ NPSEZER HO CP WL RRL, NLTIR nlight, NLTIRER nlight USPOM nlight Lumen Compensation nlight dimming pack controls -V eldoled drivers (EZ, EZ). nlight dimming pack controls -V eldoled drivers (EZ, EZ). ER controls fixtures on emergency circuit. High ambient option Chicago Plenum Wet Location, specify for exterior use applications RELOC -ready luminaire connectors enable a simple and consistent factory installed option across all L luminaire brands. Refer to RRL for complete nomenclature. vailable only in RRL, RRL, RRLE, and RRLCS. ir enabled IR Dimming Pack Wireless Controls. Controls fixtures on emergency circuit US point of manufacture ccessories: Order as separate catalog number. EC ISSM Compact interruptible emergency C power system EC ISSM Compact interruptible emergency C power system GR JZ Oversized trim ring with outside diameter SC Sloped ceiling adapter. Refer to TECH-SC for more options. Overall height varies based on lumen package; refer to dimensional chart on page. Not available with finishes. Not available with emergency options. Must specify voltage V or V. vailable with clear (R) reflector only. dd SD for self-diagnostic option (i.e. ELSD) Specify voltage. ER for use with generator supply EM power. Will require an emergency hot feed and normal hot feed. Fixture begins at % light level. Must be specified with NPSEZ or NPSEZ ER. Only available with EZ and EZ drivers. Not available with CP, NPSEZ, NPSEZER, NPPD, NPPDER or N options. NLTIR and NLTIRER not recommended for metal ceiling installations. Fixture height is. for all lumen packages with HO. Must specify voltage for lm. lm with marked spacing L x W x H. DOWNLIGHTING

2 PHOTOMETRY Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at bove Floor for a Single Luminaire / LOR, input watts:., delivered lumens:, LM/W =., spacing criterion at =., test no. ISF P. Zone % Lamp *. % pc % % % pw % % % % % % % % %..... % beam -. % beam / LOR, input watts:., delivered lumens:., LM/W =., spacing criterion at =., test no. ISF P. Zone % Lamp *. % pc % % % pw % % % % % % % % %..... % beam -. % beam / LOR, input watts:., delivered lumens:., LM/W =., spacing criterion at =., test no. ISF P. Zone % Lamp *. % pc % % % pw % % % % % % % % %..... % beam -. % beam cuity rands Lighting, Inc. ll rights reserved. Rev. //

3 * ll dimensions are inches (centimeters) unless otherwise noted. LUMEN LUMEN [.] [.] [.] [.] [.] [.] [.] [.] perture: -/ (.) Ceiling Opening: -/ (.) Overlap trim: -/ (.) perture: -/ (.) Ceiling Opening: -/ (.) Overlap trim: -/ (.) LUMEN [.] [.] [.] [.] Marked Spacing: x x perture: -/ (.) Ceiling Opening: -/ (.) Overlap trim: -/ (.) EL-ELR CP [.] [.] [.] [.] [.] [.] [.] [.] [.] Marked Spacing above lumen: x x perture: -/ (.) Ceiling Opening: -/ (.) Overlap trim: -/ (.) Marked Spacing above lumen: x x perture: -/ (.) Ceiling Opening: -/ (.) Overlap trim: -/ (.) HOW TO ESTIMTE DELIVERED LUMENS IN EMERGENCY MODE Lumen K Wattage LPW Use the formula below to estimate the delivered lumens... in emergency mode... Delivered =. x P x LPW... P = Ouput power of emergency driver. P = W for PSCP... LPW = Lumen per watt rating of the luminaire. This information is available... on the L luminaire spec sheet. The LPW rating is also available at LUMEN OUTPUT MULTIPLIERS - FINISH LUMEN OUTPUT MULTIPLIERS - CCT Clear (R) White (WR) lack (R) K K K K K Specular (LS). N/ N/ CRI..... Semi-specular (LSS). N/ N/ Matte diffuse (LD). N/ N/ Painted N/.. Tested in accordance with IESN LM--. Tested to current IES and NEM standards under stabilized laboratory conditions. CRI: typical. - cuity rands Lighting, Inc. ll rights reserved. Rev. //

4 DDITIONL DT MNUFCTURER Lutron Leviton Synergy Douglas Lighting Controls Entertainment Technology Honeywell HUNT Dimming COMPTILE -V WLL-MOUNT DIMMERS PRT NO. Diva DVTV Diva DVSCTV Nova T NTFTV Nova NFTV WSMT-DW WSMG-DW MRMG-DW Leviton Centura Fluorescent Control System IllumaTech IP Series ISD C SLD LPCS Digital Equinox (DEQ C) WPC- Tap Glide TGFM (V) Tap Glide Heatsink TGHFM (V) Oasis FMU EL EL Preset slide: PS--IV and PS--WH Preset slide: PS--W-IV and PS--W-WH Preset slide, controls FD-: PS-IFC--IV and PS-IFC--WH-/V Preset slide, controls FD-: PS-IFC--W-IV and PS-IFC--W-WH-/V Remote mounted unit: FD- POWER OOSTER VILLE CN PE RDMFC EL (optional) Lehigh Electronic Products Solitaire PX PDM Electrical Products WPC- Starfield Controls TR with DLI interface port RT DLInet Router WattStopper LS- used with LCD- and LCD- Capable Luminaire This item is an + capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning. ll configurations of this luminaire meet the cuity rands specification for chromatic consistency This luminaire is part of an + Certified solution for nlight control networks when ordered with drivers marked by a shaded background* This luminaire is part of an + Certified solution for nlight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background* To learn more about +, visit. *See ordering tree for details - cuity rands Lighting, Inc. ll rights reserved. Rev. //

5 EXMPLE Group Fixture Control* *ppiication diagram applies for fixtures with eldoled drivers only. nps EZ Dimming/Control Pack (qty: required) npodm P DX Dual On/Off/Dim Push-utton WallPod ncm DCX Daylight Sensor with utomatic Dimming Control ncm PDT Dual Technology Occupancy Sensor ncm PDT npodm P DX Description: This design provides a dual on/off/dim wall station that enables manual control of the fixtures in Row and Row separately. dditionally, a daylight harvesting sensor is provided so the lights in Row can be configured to dim automatically when daylight is available. n occupancy sensor turns off all lights when the space is vacant. C nps EZ C WIRING KEY nps EZ C CT-e Cable Line Power Low Voltage Dimming Wires ncm DCX OPTIONL Choose Wall Controls nlight offers multiple styles of wall controls - each with varying features and user experience. Push-utton Wallpod Traditional tactile buttons and LED user feedback Graphic Wallpod Full color touch screen provides a sophisticated look and feel nlight Wired Controls ccessories: Order as separate catalog number. Visit for complete listing of nlight controls. WallPod Stations Model number Occupancy sensors Model Number On/Off npodm (Color) Small motion º, ceiling (PIR/dual Tech) ncm / ncm PDT On/Off & Raise/Lower npod DX (Color) Large motion º, ceiling (PIR/dual tech) ncm / ncm PDT Graphic Touchscreen npod GFX (Color) Wide View (PIR/dual tech) nwv / nwv PDT Photocell controls Model Number Wall Switch w/ Raise/Lower (PIR/dual tech) nwsx LV DX / nwsx PDT LV DX Dimming ncm DCX Cat- cables (plenum rated) Model Number ', CT FT CT FT J, CT FT CT FT J nlight IR Control ccessories: Order as separate catalog number. Visit Wall switches Model number On/Off single pole rpod [color] On/Off two pole rpod P [color] On/Off & raise/lower single pole rpod DX [color] On/Off & raise/lower two pole rpod P DX [color] On/Off & raise/lower single pole rpodz DX WH Can only be ordered with the RESZ zone control sensor version. nlight IR nlight IR is the ideal solution for retrofit or new construction spaces where adding communication is cost prohibitive. The integrated nlight IR rpp Power Pack is part of each Indy L-Series Luminaire. These individually addressable controls offer the ultimate in flexibility during initial setup and for space repurposing. Simple as,,. Install the nlight IR fixtures with embedded smart sensor. Install the wireless battery-powered wall switch. With CLIRITY app, pair the fixtures with the wall switch and if desired, customize the sensor settings for the desired outcome nlight IR rpod P DX Mobile Device - cuity rands Lighting, Inc. ll rights reserved. Rev. //