Gage Unamplified Noncompensated Flow-Through

Transcription

1 Gage Unamplified Noncompensated Flow-Through FEATURES Measures positive and negative gage pressures Flow-through port design fits in-line with application Popular port sizes: - 8 mm (.315 in.) OD (1/4 in. ID tubing or standard connectors) in. OD (1/8 in. ID tubing) 24PC Series Medical grade ISO (USP Class 6) port material Silicon sensor chip 24 inch wire harness with splash proof connector Minimal deadspace efficient cleansing and disinfecting 24PC SERIES PERFORMANCE CHARACTERISTICS at 10.0 ±0.01 VDC EXCITATION, 25 C Min. Typ. Max. Units Excitation VDC Null Shift, 25 to 0, 25 to 50 C --- ± mv Null Offset mv Linearity, P2 > P1, BFSL --- ± %Span Span Shift, 25 to 0, 25 to 50 C --- ± %Span Repeatability & Hysteresis --- ± %Span Response Time msec Input Resistance 4.0 K 5.0 K 6.0 K ohms Output Resistance 4.0 K 5.0 K 6.0 K ohms Stability over One Year --- ± %Span Unamplified ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Shock Vibration Media Compatibility 40 to +85 C ( 40 to +185 F) 55 to +100 C ( 67 to +212 F) Qualification tested to 150 g Qualification tested to 0 to 2 khz, 20 g sine Limited only to those media which will not attack polysulfone, silicon, fluorosilicone, silicone, EPDM, and neoprene seals 24PC SERIES FLOW THROUGH ORDER GUIDE Pressure Sensitivity Catalog Range Span, mv mv/psi Overpressure Listing psi Min. Typ. Max. Typ. psi Max. 24PCE Type PCA Type PCB Type PCC Type PCD Type PCF Type PCG Type Honeywell MICRO SWITCH Sensing and Control USA International Canada 21

2 Gage Unamplified Noncompensated Flow-Through 24PC Series SENSOR SELECTION GUIDE 2 4 PC A F* N 5 G Product Circuit Pressure Pressure Type of Port Termination Pressure Family Type Transducer Range Seal Type Style Measurement 2 20PC Family 4 Noncompensated A 1 psi B 5 psi C 15 psi D 30 psi E 0.5 psi F 100 psi G 250 psi E EPDM F Fluorosilicone N Neoprene S Silicone G Small N Large (.350 dia.) P Large (.315 dia.) 2 4-pin DIP 5 Wire harness 6 4-pin SIP Example: 24PCBFG5G Non-compensated 5 psi sensor, fluorosilicone seal, small flow-through ports, wire harness, and gage pressure measurement. *Other media seal materials may be available. Note: Not all combinations are established. Contact 800 number before final design. See Accessory Guide, page 27. G Gage 22 Honeywell MICRO SWITCH Sensing and Control USA International Canada

3 Gage Unamplified Compensated Flow-Through FEATURES Measure positive and negative gage pressures Flow-through port design fits in-line with application Popular port sizes: - 8 mm (.315 in.) OD (1/4 in. ID tubing or standard connectors) in. OD (1/8 in. ID tubing) 26PC Series Medical grade ISO (USP Class 6) port material Silicon sensor chip 24 inch wire harness with splash proof connector Minimal deadspace efficient cleansing and disinfecting 26PC SERIES PERFORMANCE CHARACTERISTICS at 10.0 ±0.01 VDC Excitation, 25 C Min. Typ. Max. Units Excitation VDC Repeatability & Hysteresis --- ± %Span Response Time msec Input Resistance 5.5 K 7.5 K 11.5 K ohms Output Resistance 1.5 K 2.5 K 3.0 K ohms Stability over One Year --- ± %Span Weight grams Total error calculation, see page 105. Unamplified ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Compensated Temperature Shock Vibration Media (P1 & P2) 40 to 85 C ( 40 to +185 F) 55 to +100 C ( 67 to +212 F) 0 to +50 C (32 to +122 F) Qualification tested to 150 g MIL-STD-202. Method 213 (150g halfsine, 11 msec) Limited only to those media which will not attack polyetherimide, silicon, fluorosilicone, silicone, EPDM, and neoprene seals. 26PC SERIES ORDER GUIDE Pressure Over- Catalog Range Linearity Null Shift Null Offset Span Shift Span Sensitivity pressure Listing (psi) (% span) (mv) (mv) (% span) (mv) mv/psi psi Typ. Max Typ. Max Min. Typ. Max. Typ. Max. Min. Typ. Max. Typ. Max. 26PCA TYPE ±0.5 ± ±1.0 ± PCB TYPE ±0.5 ± ±1.0 ± PCC TYPE ±0.5 ± ±0.75 ± PCD TYPE ±0.75 ± ±0.75 ± PCF TYPE ±1.0 ± ±0.5 ± PCJ TYPE 38* ±0.7 ± ±1.0 ± PCK TYPE 38* ±0.7 ± ±1.0 ± *Accuracy specifications calculated at 15 psi. Honeywell MICRO SWITCH Sensing and Control USA International Canada 23

4 Gage Unamplified Compensated Flow-Through 26PC Series SENSOR SELECTION GUIDE 2 6 PC A F* N 5 G Product Circuit Pressure Pressure Type of Port Termination Pressure Family Type Transducer Range Seal Type Style Measurement 2 20PC Family 6 Compensated, Calibrated A 1 psi B 5 psi C 15 psi D 30 psi F 100 psi J 38 psi K 38 psi (passivated) E EPDM F Fluorosilicone N Neoprene S Silicone G Small N Large (.350 dia.) P Large (.315 dia.) 2 4-pin DIP 5 Wire harness 6 4-pin SIP Example: 26PCBFG5G Compensated, calibrated 5 psi sensor, fluorosilicone seal, small flow-through ports, wire harness, and gage pressure measurements. *Other media seal materials may be available. Note: Not all combinations are established. Contact 800 number before final design. See Accessory Guide, page 27. G Gage 24 Honeywell MICRO SWITCH Sensing and Control USA International Canada

5 Gage Unamplified Flow-Through MOUNTING DIMENSIONS (for reference only) Large Port Sensor N 24/26PC Series 20PC CIRCUIT NOTES 1. Circled numbers refer to Sensor Terminals (interface pins). 2. V 0 increases with pressure change. 3. V 0 V 2 V 4 PIN DESIGNATION Pin 1 V s (Red) Pin 2 Output, + (White) Pin 3 Ground, (Black) Pin 4 Output, (Green) EXCITATION Unamplified Large Port Sensor P Flow-Through Construction NOTE: Wire harness (PC-15175) may be purchased separately. Honeywell MICRO SWITCH Sensing and Control USA International Canada 25

6 Gage/Unamplified Flow-Through 24/26PC Series MOUNTING DIMENSIONS (for reference only) Small Port Sensor (1 x 4) Small Port Sensor (2 x 2) Small Port Sensor (G) 26 Honeywell MICRO SWITCH Sensing and Control USA International Canada

7 Accessories 22/24/26PC Series ACCESSORIES SELECTION GUIDE Catalog Listing Description Drawing PC Steel lockring (included with Port Style A, 1 x 4 terminals only) 22, 24, 26PC only Figure 1 PC Cable retaining clip for large port Flow-Through sensor only Figure 4 PC Single hole plastic bracket Figure 3 PC Mounting bracket Figure 6 PC Plastic Mounting bracket Figure 5 20PCWHRC Flow-Through wire harness and retaining clip Figure 2 26PCBKT Mounting bracket for large port Flow-Through sensor only Figure 7 PC Mounting bracket for Luer Port Figure 8 PC Mounting bracket for Straight Port Figure 9 Unamplified Figure 1 PC Steel Lockring Figure 2 20PCWHRC Wire Harness and Retaining Clip Figure 3 PC Single Hole Plastic Bracket Figure 4 PC Cable Retaining Clip Figure 5 PC Plastic Mounting Bracket Honeywell MICRO SWITCH Sensing and Control USA International Canada 27

8 Accessories 22/24/26PC Series Figure 6 PC Mounting Bracket Figure 7 26PCBKT For use with N, P Large Ports Figure 8 PC For use with C Luer Port Figure 9 PC For use with A Straight Port Note: PC and PC are Printed Circuit Board mountable and solderable; designed to be used in a.063 thick PC Board with a recommended mounting hole size of.125 ±.005 in. 28 Honeywell MICRO SWITCH Sensing and Control USA International Canada