Maestro Dimmer - Satin Finish, Incandescent/Halogen, Single-Pole, Clamshell Packaging, 120V/600W In Biscuit

Transcription

1 MSC600HBI Bisc 600W Dimmer Lutron Catalog Number Manufacturer Description Weight per unit Product Category MSC600HBI Lutron Maestro Dimmer - Satin Finish, Incandescent/Halogen, Single-Pole, Clamshell Packaging, 120V/600W In Biscuit N/A Lighting Dimmers Features actuator Tap on/off load Electrostatic discharges up to 16000V Voltage Rating 120 Wattage 600 Dimensions and Weight Size Descriptions Description Long Description Product Type special features Manufacturer Information Brand sub brand 4.69in (119mm) x 2.94in (75mm) BISC 600W DIMMER Maestro Dimmer - Satin Finish, Incandescent/Halogen, Single-pole, clamshell packaging, 120V/600W in biscuit Maestro SC 600W Single Clam-MSC-600H-Bi Digital fade dimmer Provides true dimming from each location. Clam shell package Lutron Maestro Taxonomies, Classifications, and Categories Type Incandescent/halogen dimmer Packaging Carton 1 Weight Per each 0

2 Uses, Certifications, and Standards environmental conditions Frequency Rating 60 Mounting WALLBOX Operating Temperature 0-40 C standard IEC ANSI/IEEE C62.41C Relative humidity less than 90 percentnon-condensing. Indoor use only

3 GRAFIK TTM Controls Features Controls include dimmers, switches, and companion device. Simple touch control. Distinctive architectural aesthetic. Softly lit white LEDs indicate light level and coordinate with any décor. Models available with or without Clear ConnectR RF wireless technology Clear ConnectR RF technology (GTJ models only) compatible with: PicoR wireless controls Radio Powr SavrT Occupancy / Vacancy Sensors Radio Powr SavrT Daylight Sensors Advanced microprocessor dimming technology for control of dimmable LED lamps. 1 Low-end and high-end trim are available for improved LED dimming performance (dimmer only). Optional neutral connection available on 250 W LED models for superior LED dimming performance (dimmer only). 2 Installs in single-pole or multi-location applications. Companion devices are available for multi-location control with dimmers and switches (maximum 4 companion devices per dimmer or switch, 1 main control per circuit). Use LutronR GRAFIK TTM wallplates. All controls come with white wallplate. Other colors and finishes are sold separately. See the Colors and Finishes on page 12 for details. LutronR GRAFIK TTM wallplates snap on with no visible means of attachment. Dimmer / Switch f Companion Device 1 If using LED bulbs, they must be Lutron compatible! For compatibility and performance information, visit our website at which is constantly being updated. 2 GRAFIK TTM switch requires neutral connection.

4 Model Numbers Dimmers GTJ-150-WH Clear Connect RF Technology 150 W Dimmable LED W Incandescent / Halogen 2-wire dimmer (no neutral connection) Single-pole dimmer f GTJ-250M-WH GT-150-WH GT-250M-WH Clear Connect RF Technology 250 W Dimmable LED W Incandescent / Halogen 400 VA (300 W) Magnetic Low-Voltage with Halogen based lamps 3.3 A (400 VA) Dimmable Fluorescent A (400 W) Hi-lume A-Series LTE LED Driver (10 driver maximum) connection available Multi-location dimmer 150 W Dimmable LED W Incandescent / Halogen 2-wire dimmer (no neutral connection) Single-pole dimmer 250 W Dimmable LED W Incandescent / Halogen 400 VA (300 W) Magnetic Low-Voltage with Halogen based lamps 3.3 A (400 VA) Dimmable Fluorescent A (400 W) Hi-lume A-Series LTE LED Driver (10 driver maximum) connection available Multi-location dimmer Switches GT-5ANSM-WH 3 GTJ-5ANSM-WH 3 Companion Device GT-AD-WH 5 A Incandescent / Halogen / Fluorescent / LED / MLV / ELV / HID / Relay 3 A Fan 1/10 HP Motor connection required Multi-location Switch Clear Connect RF Technology 5 A Incandescent / Halogen / Fluorescent / LED / MLV / ELV / HID / Relay 3 A Fan 1/10 HP Motor connection required Multi-location Switch Companion device (works with dimmer or switch) Wallplates LWT-G-XXX 4,5 LWT-GG-XXX 4,5 LWT-GGG-XXX 4,5 LWT-GGGG-XXX 4,5 Single gang GRAFIK TTM wallplate Two gang GRAFIK TTM wallplate Three gang GRAFIK TTM wallplate Four gang GRAFIK TTM wallplate If using LED bulbs, they must be Lutron compatible! For compatibility and performance information, visit our website at which is constantly being updated. Includes Mark X, Tu-Wire, and POWERSENSE. Not for use with receptacles or appliances (e.g., garbage disposals). See Application Note #109 for compatibility with dimmable receptacles. XXX in the model number represents color/finish code. See Colors and Finishes on page 12 for details. GRAFIK TTM controls cannot be ganged with Vierti controls or wallplates. Mark X is a registered trademark of Philips Electronics North America Corporation. POWERSENSE is a registered trademark of OSRAM SYLVANIA Inc.

5 Specifications Regulatory Approvals UL Listed cul Listed NOM Certified FCC / IC IFTEL Power 120 V~ 60 Hz Typical Power Consumption Dimmer / Switch: 0.2 W (GTJ models), 0.1 W (GT models) Companion device: 0.1 W Test conditions: load is off Environment Ambient Temperature Operating Range: 32 F to 104 F (0 C to 40 C) Relative humidity: 0% to 90% non-condensing For indoor use only. Performance Power failure memory: should power be interrupted, the control will return to its previous state when power is restored. Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC Dimmers / Switches communicate with PicoR wireless controls or Radio Powr SavrT sensors through Radio Frequency (RF) and must be located within 30 ft (9 m) of these devices (GTJ models only). Companion devices do not have Clear ConnectR RF technology and are not required to be within a specific range of these devices. Uses conventional 3-way and 4-way wiring. Total multi-location wire length (blue wire) between all units must not exceed 150 ft (45 m) f Application Requirements When using LEDs, only Lutron approved lamps marked or rated as Dimmable can be used. If using LED bulbs, they must be Lutron compatible! For compatibility and performance information, visit our website at which is constantly being updated. For a complete list of approved DIMMABLE LEDs please visit or call Up to 10 sensors or Pico wireless controls can be assigned to each dimmer or switch (GTJ models only). Sensors can be assigned to multiple dimmers or switches (GTJ models only). Mounting Requires a U.S. wallbox. 3 ½ in (89 mm) deep recommended, 2 ¼ in (57 mm) deep minimum. Warranty 1 Year Limited Warranty For additional Warranty information, please visit _Wallbox_Warranty.pdf

6 Operation f Adjust Touch to set lights to desired level (dimmer only) Slide to adjust light level (dimmer only) Touch anywhere to toggle load On / Off (switch only) Toggle Touch to turn off or to turn on to previous light level When On, press and hold to engage the delayed long fade to Off (dimmer only) Toggle button is white when On, orange when Off FASSTM Front Accessible Service Switch Note: The FASSTM is not available on companion devices. IMPORTANT NOTICE: FASSTM - Front Accessible Service Switch To replace lamp(s), remove power by pulling the FASSTM down fully on all main controlling devices. After replacing lamp(s), push the FASSTM back up fully to restore power to the control(s).

7 Dimensions All dimensions are shown as (mm) in Front View Side View f (119) 2.83 (72) 0.17 (4) 2.94 (75) 0.42 (11) 1.33 (34) Mounting and Parts Identification Control Mounting Screws Wallplate Adapter Adapter Mounting Screws Wallplate Wallbox Control Wallplate adapter and wallplate included (white).

8 Ganging and Derating When combining controls in the same wallbox, derating is required. See Load Type and Capacity. No derating is required for companion devices. Load Type and Capacity f Control Load Type Not Ganged End of Gang Middle of Gang Connection GT-150-WH 1 LED 150 W 150 W 150 W GTJ-150-WH Incandescent / Halogen 600 W 500 W 400 W No GT-250M-WH 2,3 GTJ-250M-WH 2,3 GT-5ANSM-WH 3,7 GTJ-5ANSM-WH 3,7 LED 250 W 250 W 250 W Incandescent / Halogen MLV Halogen 4,5 600 W 500 W 400 W 400 VA (300 W ) 400 VA (300 W ) 400 VA (300 W ) Dimmable Fluorescent A (400 VA) 3.3 A (400 VA) 3.3 A (400 VA) LutronR Hi-lumeR A-Series LTE LED Driver 3.3 A (400 W), 10 drivers max 3.3 A (400 W), 10 drivers max 3.3 A (400 W), 10 drivers max Lighting 5 A (600 W) 4.1 A (500 W) 3.3 A (400 W) Fan 3 A (360 W) 3 A (360 W) 3 A (360 W) Motor 1/10 HP 1/10 HP 1/10 HP Mixed 3 A (360 W) 3 A (360 W) 3 A (360 W) Optional Required Required 1 Designed for use with permanently installed LED, incandescent, or tungsten halogen only. 2 Designed for use with permanently installed LED, incandescent, tungsten halogen, or magnetic low voltage transformers with halogen based lamps. 3 Power Boosters / Load Interfaces: Can be used to control power boosters / load interfaces. For a list of compatible power boosters / load interfaces see Compatible Power Boosters and Load Interfaces. Switches and -250M models only, neutral connection required. 4 Low-Voltage Applications: Use only with magnetic (core and coil) low-voltage transformers with halogen based lamps. Not recommended for use with electronic (solidstate) low-voltage transformers but UL listed for dimmable ELV transformers. Operation of a low-voltage circuit with lamps inoperative or removed may result in transformer overheating and premature failure. Lutron strongly recommends the following: Do not operate low-voltage circuits without operative lamps in place. Replace burned-out lamps as soon as possible. Use transformers that incorporate thermal protection or fused transformer primary windings to prevent transformer failure due to overcurrent. 5 When using the dimmer / switch to control MLV halogen fixtures, the maximum lamp wattage is determined by the efficiency of the transformer, with 70% 85% as typical. For actual transformer efficiency, contact either the fixture or transformer manufacturer. The total VA rating of the transformer(s) shall not exceed the VA rating of the dimmer / switch. 6 Includes Mark X, Tu-Wire, and POWERSENSE. 7 Not for use with receptacles or appliances (e.g., garbage disposals). See Application Note #109 for compatibility with dimmed receptacles. Mark X is a registered trademark of Philips Electronics North America Corporation. POWERSENSE is a registered trademark of OSRAM SYLVANIA Inc.

9 Minimum Load Dimmer Application Number of Companion Devices With Connected Incandescent / LED 1 Halogen With With Disconnected Connected With Disconnected With Connected MLV Halogen f With Disconnected Single Pole 0 1 LED lamp 2 2 LED lamps 2 5 W 40 W 40 W 40 W Multi-location 1 1 LED lamp 2 3 LED lamps 2 5 W 80 W 40 W 80 W Multi-location 2 1 LED lamp 2 4 LED lamps 2 5 W 120 W 40 W 120 W Multi-location 3 1 LED lamp 2 5 LED lamps 2 5 W 160 W 40 W 160 W Multi-location 4 1 LED lamp 2 6 LED lamps 2 5 W 200 W 40 W 200 W Switch Minimum load for the switch is 5 W, one Lutron compatible LED replacement lamp, or one A-Series LED driver. Compatible Power Boosters and Load Interfaces Some local controls can be used to control power boosters or load interfaces. Up to three power boosters or load interfaces can be used with one control. See table below for a list of controls and compatible power boosters and load interfaces. When controlling power boosters/load interfaces, the neutral must be connected. Control GT-250M GTJ-250M GT-5ANSM GTJ-5ANSM Phase Adaptive Power Modules (PHPM-PA-120-WH & PHPM-PA-DV-WH) 3 3-wire Fluorescent Power Modules (PHPM-3F-120-WH & PHPM-3F-DV-WH) 4 Switched Power Module (PHPM-SW-DV-WH) V Interface and Switching Module (GRX-TVI) Includes Lutron compatible LED replacement lamps and A-Series LED drivers. If using LED bulbs, they must be Lutron compatible! For compatibility and performance information, visit our website at which is constantly being updated. See Lutron P / N for wiring diagrams. See Lutron P / N for wiring diagrams. See Lutron P / N for wiring diagrams. See Lutron P / N for wiring diagrams.

10 Wiring Diagrams f Wiring Diagram 1 Single Location Installation without 1,2 GT-150, GTJ-150, GT-250M, or GTJ-250M only Dimmer Line/Hot Black V~ 60 Hz White 2 Load Wiring Diagram 2 Single Location Installation with 1 GT-250M, GTJ-250M, GT-5ANSM, or GTJ-5ANSM Dimmer / Switch Line/Hot Black V~ 60 Hz White Load 1 When using controls in single location installations, cap off the blue wire. Do not connect the blue wire to any other wiring or to ground (-5ANSM and -250M models only). 2 When neutral wire connection is unavailable, cap off the white wire. Do not connect the white wire to any other wiring or to ground (-250M models only). Continued on next page...

11 Wiring Diagrams (continued) f Wiring Diagram 3 Multi-Location Installation without 1,2,3 - Dimmer Line Side GT-250M or GTJ-250M with GT-AD Dimmer Companion Device Companion Device Line/Hot Black White 1 Load 120 V~ 60 Hz Wiring Diagram 4 Multi-Location Installation without 1,2,3 - Dimmer Load Side GT-250M or GTJ-250M with GT-AD Companion Device Companion Device Dimmer Line/Hot Black Black White 1 Load 120 V~ 60 Hz 1 When neutral wire connection is unavailable, cap off the white wire. Do not connect the white wire to any other wiring or to ground. 2 Up to 4 companion devices may be connected to each dimmer. Total blue traveler wire length may be up to 150 ft (45 m). 3 Dimmers may be connected on the Line side or Load side of a multi-location installation if neutral is not connected. The dimmer cannot be installed in the middle location of a 4-way installation. Continued on next page...

12 Wiring Diagrams (continued) f Wiring Diagram 5 Multi-Location Installation with 1,2 - Control Line Side GT-250M, GTJ-250M, GT-5ANSM, or GTJ-5ANSM with GT-AD Dimmer / Switch Companion Device Companion Device Line/Hot Black White Load 120 V~ 60 Hz 1 Up to 4 companion devices may be connected to each dimmer or switch. Total blue traveler wire length may be up to 150 ft (45 m). 2 Control must be installed on line side of circuit if using neutral wire.

13 GRAFIK TTM Wallplates f LWT-G-XX X 1 (1 Gang) LWT-GG-XX X 1 (2 Gang) LWT-GGG-XX X 1 (3 Gang) LWT-GGGG-XX X 1 (4 Gang) 1 XXX in the model number represents color/finish code. See the Colors and Finishes on page 12 for details.

14 GRAFIK TTM Colors and Finishes f Architectural Matte Finishes Satin Finishes White WH Ivory IV Hot HT Merlot MR Plum PL Turquoise TQ Taupe TP Almond AL Light Almond LA Eggshell ES Biscuit BI Snow SW Palladium PD Midnight MN Gray GR Taupe TP Sienna SI Terracotta TC briar GB stone BG Mocha Stone MS Beige BE Brown BR Goldstone GS Desert Stone DS Stone ST Limestone LS Glass Finish Black BL Sienna SI Clear Glass CWH Architectural Metal Finishes Satin Brass SB Bright Brass BB Bright Chrome BC Antique Brass QB Antique Bronze QZ Clear Anodized Aluminum CLA Black Anodized Aluminum BLA Brass Anodized Aluminum BRA Satin Nickel SN Bright Nickel BN Satin Chrome SC Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors. Color chip keychains are available for more precise color matching: Architectural Matte Finishes: AM-CK-1 Architectural Metal Finishes: AMTL-CK-1 Satin Color Finishes: SC-CK-1 S P E C I F I C AT I O N S U B M I T TA L 12