LED Drivers & Dimmers

Transcription

1 LED Drivers & Dimmers

2 DIMMING COMPATIBILITY Testing has been performed on these dimmers, however, this does not imply any warranty of compatibility or performance. O3 LED Track Fixture Series: CTL8251, CTL8252, CTL8253, and CTL8254 Standard Dimming Option Compatible with most Electronic Low Voltage and Electronic Low Voltage (ELV) Triac (Incandescent) Triac (Incandescent) Dimmers Faedra Trimatron NovaT Maestro Acenti Illumitech Vizia True Torch Aspire O3 LED Track Fixture Series: CTL8251, CTL8252 and CTL8253 D3 Dimming Option Stealth LED Wall Lighter Series: CTL181 and CTL182 D3 Dimming Option Utlizes the HiLume A-Series Dimming Driver Compatible Dimming Controls The following is a general list of compatible HiLume dimming controls. For specific part numbers, please refer to or contact Contech Lighting Technical Support NovaT RadioRA 600W HomeWorks QS 600W RPM-4U Module Maestro Wireless Radio RA 1000W HomeWorks QS 1000W RPM-4A Module RadioRA W HomeWorks QS Adaptive Dimmer HomeWorks 600W Dimmer Stanza RadioRA 2 Adaptive Dimmer HomeWorks QS WPM HomeWorks 1000W Dimmer HomeWorks WPM Grafik Eye QS Grafik Eye 3000 GP Panels Optica and LED Cylinder Fixture Series: CTL802818L, CTL802927L, CTL8001, CTL8002, LIR8001, LIR8002 Compatible with most Electronic Low Voltage Electronic Low Voltage (ELV) Triac (Incandescent) and Triac (Incandescent) Dimmers Faedra NovaT Maestro Illumitech Acenti True Torch Aspire Trimatron Optica Mini LED Track Fixture Series: CTL804L2 Compatible with most Electronic Low Voltage, Electronic Low Voltage (ELV) Triac (Incandescent) Magnetic Low Voltage and Triac (Incandescent) Dimmers Sure Slide Trimatron Deluxe Lightolier Sunrise Decora Lightolier MultiSet Pro Arinadi Magnetic Low Voltage (MLV) LED Linear Wall Lighter Fixture Series: CTL170 and CTL171 Compatible with most Electronic Low Voltage Electronic Low Voltage (ELV) Triac (Incandescent) and Triac (Incandescent) Dimmers Maestro Sureslide NovaT Vizia Illumatech Illumatech Eclipse LED Track Fixture Series: CTL8081H, CTL8071, and CTL8072 Compatible with most Triac (Incandescent) Dimmers Triac (Incandescent) Toggler Illumatech Quadris LED Wall Sconces: WS075L, WS085L Compatible with most Electronic Low Voltage Electronic Low Voltage (ELV) Triac (Incandescent) and Triac (Incandescent) Dimmers Faedra NovaT Maestro Illumitech Acenti True Torch Aspire Trimatron 8W LED Pendant: CRS8 Series Compatible with most Electronic Low Voltage Electronic Low Voltage (ELV) Triac (Incandescent) and Triac (Incandescent) Dimmers. Faedra NovaT Maestro Illumitech Acenti True Torch Aspire Trimatron 6" & 8" Hardwired LED Recessed Modules: RFTA63430K, RFTA83430K, CST6L3430K, and CST8L3430K Compatible Dimming Controls NovaT NTLV600 DVLV-600P DVCL-153P DVELV-303P SELV-300P CTCL-153P Maestro MRF2-6ND-120 Maestro MACL-153M Pass & Seymour TDLV703-PW 4

3 DIMMING COMPATIBILITY Testing has been performed on these dimmers, however, this does not imply any warranty of compatibility or performance. Socketed LED Recessed Modules: RFT4E130K, RFT56E130K, RFT6E-130K Series, RFT6E-ADJ-130K Series, RFT6G-130K Series and RFT6G-ADJ-130K Series Compatible Dimming Controls NovaT NTELV300 Acenti ATE06-1L NovaT NTELV600 Trimatron 705-I DVELV-300P DVELV-303P This matrix is designed to provide multiple options to powering the MCT-3LED Symphony Track fixture and MRL-3LED Symphony Track pendants. All transformers and drivers must be installed according to National Electrical Code and local building codes. Due to minimum wattage requirements of many electronic transformers, ConTech offers a low wattage Electronic Transformer option, as well as Magnetic Transformers and Drivers. MOUNTING OPTION # OF FIXTURES/ TOTAL WATTAGE ELECTRONIC TRANSFORMER MAGNETIC TRANSFORMER Mono-Point (MLA-18 or MLA-19) 1 Fixture/Up to 4.7W RS1260MLED LVT-150 Symphony Track Up to (2) Fixtures/ Total of 9.4W RS1260M LED LVT-150 LED10CV12 Symphony Track Up to (3) Fixtures/ Total of 14.1W RS1260M LED LVT-150 LED25 12V Symphony Track Up to (4) Fixtures/ Total of 18.8W RS1260M LED LVT-150 LED25 12V 5-10 Fixtures/ Total of 23.5W - 47W LRT-181, LRT-363, MLA-60 LVT-1200-C-24, LVT-150, LVT-300, LVT V, LVT , LVT-500-C, LVT , LVT V-24, LVT-600-C LED60WDC12V 11 or More Fixtures/ Total of 51.7W+ LRT-181, LRT-363, LVT-151, LVT V, LVT-175-DC, LVT-303, LVT V, LVT-303-DC, MLA-60, MLA-415, MLA-830 LVT-1200-C-24, LVT-150, LVT-300, LVT V, LVT , LVT-500-C, LVT , LVT V-24, LVT-600-C LED100WDC12V Symphony Track Symphony Track TRANSFORMER/DRIVER MATRIX FOR MCT-3LED FIXTURE & MRL-3LED PENDANTS DRIVER LED10CV12 5

4 DIMMING COMPATIBILITY 2" LED DOWNLIGHT, 6" & 8" INTEGRATED LED CYLINDERS, OPTICA RECESSED MULTIPLES, LED RECESSED MULTIPLES The following ConTech LED Products are compatible with the dimmers listed below. RAN18L and RAN27L Recessed Multiples: Standard, 0-10V DC and LUTRON Hi-Lume Dimming RDA4L and RDA6L Recessed Multiples and RA2LRM 2 Recessed: Standard, Electronic Low Voltage and 0-10V DC Dimming STANDARD TRIAC DIMMING 0-10V DC DIMMING 120V AC Dimming: Incandescent (INC) and Magnetic Low Voltage (MLV) Dimmers Standard 120V AC line voltage dimmers for incandescent and magnetic low voltage loads adjust the light with forward phase control, where the dimmer chops the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required. 120V AC Dimming: Electronic Low Voltage (ELV) Dimmers Standard 120V AC line voltage dimmers for electronic low voltage loads adjust the light with reverse phase control, where the dimmer chops the back part of the AC wave to deliver less or more These systems are typically dimmable to 10%. LED Dimming performance may vary based on dimmer model, manufacturer, circuit wiring and circuit loading. Consult dimmer manufacture for the latest dimmer information. Recommended Dimmers Standard Dimmers: Series (Part #s S-600, S2-LH) Maestro Series (Part # MAW-600) Aspire Series (Part # 9530XXX) Illumitech Series (Part # IPI06-XXX) Trimatron Series (Part #s 6602-X, 6681-X, 6683-X, 6684-X, 700-X, and 705-X) Series (Part # 6631) True Touch Series (Part # LM) Electronic Low Voltage Dimmers: Nova T Series (Part # NTELV-600) Faedra (Part # FAELV-500-XX) Acenti (Part # ACE06-XXX) 0-10V DC Dimming is a common type of dimming for many commercial applications. Many local codes require the contractor to separate the low and line voltage wiring in the junction box. 0-10V DC Low voltage dimming operates using two low voltage dimming wires that are separate from the 120V or 277V AC power. The 0-10V dimmer switch sends a variable output voltage to the fixture based upon the dimming level. 10V Corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled with the 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires (color coded violet and gray). These systems are typically dimmable to 15%. LED Dimming performance may vary based on dimmer model, manufacturer, circuit wiring and circuit loading. Consult dimmer manufacture for the latest dimmer information. Recommended Dimmers DVTV IP710 LUTRON Hi-Lume DIMMING Hi-Lume LED A-Series drivers offer high-performance, continuous dimming from. For a complete list of compatible dimmers and controls, please visit Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information. NOTES: Consult factory for additional dimming information. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 6

5 DIMMING COMPATIBILITY STEALTH LED WALL LIGHTER SERIES: CTL181, CTL182, CTL183 and CTL184 Incandescent 120VAC dimmers adjust the light with forward phase control, where the dimmer chops the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required. Electronic low voltage 120VAC dimmers adjust the light with reverse phase control, where the dimmer chops the back part of the AC wave to deliver less or more HiLume drivers provide continuous dimming from. For a complete list of compatible dimmers and controls, please visit CTL18 Series: D Driver Option Manufacturer Product Model 35W 41W 47W 57W Devine DAL06P 3% - 99% 0% - 100% Decorator DLC03P Skye SLC03P 2% - 100% Decora % - 99% 1 20% - 100% % - 100% 0% - 100% 6633-P 2% - 99% 3% - 100% 3% - 100% Trimatron 6683-IW 7% - 100% 6% - 100% IPE04 9% - 99% IPI06-1LZ 13% - 100% Vizia VPE06 13% - 99% 12% - 100% 12% - 100% Vizia VPI06 11% - 96% Lightolier Momentum ZP260QEW 10% - 100% 1 Contour CT103P 12% - 100% 13% - 100% DV600P DV603P 6% - 99% DVCL-153P 3% - 100% 2% - 100% 0% - 100% DVELV303P 9% - 99% 10% - 100% Faedra FAELV500 15% - 98% 15% - 100% 1 16% - 100% Lumea LG600P 6% - 99% Maestro MAELV600 15% - 99% 15% - 100% 1 16% - 100% Maestro MAW600 6% - 99% S600P S-603PG 7% - 99% 7% - 97% SELV300P 10% - 99% 10% - 100% 1 Toggler TG-600P 12% - 99% 17% - 100% 17% - 100% Toggler TGCL-153P 6% - 99% Notes 1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information. 5. Consult factory for additional dimming information. 7

6 DIMMING COMPATIBILITY MINI O2 LUMIIRE: CTL 806 SERIES Incandescent 120VAC dimmers adjust the light with forward phase control, where the dimmer chops the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required. Electronic low voltage 120VAC dimmers adjust the light with reverse phase control, where the dimmer chops the back part of the AC wave to deliver less or more HiLume drivers provide continuous dimming from. For a complete list of compatible dimmers and controls, please visit 8 CTL806 Series: D Driver Option Manufacturer Model 10W 14W 20W SLC03P 0% - 100% 0% - 100% DAL06P 0% - 100% DLC03P 2% - 100% P 0% - 100% 2% - 100% IPI06-1LZ 2% - 100% 6683-IW 6% - 100% IPE04 6% - 100% 6% - 100% VPE06 10% - 100% 1 Lightolier ZP260QEW 7% - 100% DVCL-153P 0% - 100% 3% - 100% S600P TGCL-153P 5% - 100% 6% - 100% S-603PG 4% - 96% 4% - 91% 7% - 96% DV600P 5% - 100% 0% - 100% LG600P 5% - 100% 5% - 100% DVELV303P 6% - 100% 7% - 100% SELV300P 7% - 100% 7% - 100% CT103P 12% - 100% MAELV600 12% - 100% 1 1 FAELV500 12% - 100% 12% - 100% 1 TG-600P 13% - 100% 1 15% - 100% Notes 1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information. 5. Consult factory for additional dimming information.

7 DIMMING COMPATIBILITY 2" LED DOWNLIGHT: R2ANC, R2ARM Incandescent 120VAC dimmers adjust the light with forward phase control, where the dimmer chops the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required. Electronic low voltage 120VAC dimmers adjust the light with reverse phase control, where the dimmer chops the back part of the AC wave to deliver less or more 0-10V DC low voltage dimmers operate using two low voltage dimming wires that are separate from the 120V or 277V AC power. The dimmer sends a variable output voltage to the fixture based upon the dimming level. 10V corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled with the 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires (color coded violet and gray). HiLume and EcoSystem drivers provide continuous dimming from. For a complete list of compatible dimmers and controls, please visit Use DALI approved controls for dimming eldoled MVD7 () and MVD9 (0.) options. R2ANC* R2ARM* Dimming Options 12D, 27D, MVD R2ANC eldoled ECOdrive 0-10V Dimming Options MVD6 R2ANC eldoled SOLOdrive 0-10V Dimming Options MVD8 Product Model Ariadni TGCL-153P 4%-100% Ariadni TG-600P 1 DVCL-153P 0%-100% DV600P 0%-100% DVELV303P 6%-100% DVTV 0. Faedra FAELV500 12%-100% Lumea LG600P 5%-100% Maestro MAELV600 1 Nova NFTV 0. Nova T NTFTV 0. S-603PG 4%-96% S600P SELV300P 7%-100% CT103P 9%-100% IPI06-1LZ Vizia VPE06 9%-100% Trimatron 6683-IW 4%-100% Decora %-100% 6633-P 0%-100% IPE04 6%-100% IP710-DLX 0. Pass & Seymour Titan CD4FB-W 0. Watt Stopper Miro Decorator DCLV1 0. ISD BC 0. Synergy Devine DLC03P Skye SLC03P 0%-100% Decorator DAL06P 0%-100% Manufacturer *277V Triac dimming is not available Notes 1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information. 5. Consult factory for additional dimming information. 9

8 DIMMING COMPATIBILITY 4" & 6" LED RECESSED DOWNLIGHTS: R4 Series, R6 Series Incandescent 120VAC dimmers adjust the light with forward phase control, where the dimmer chops the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required. Electronic vow voltage 120VAC dimmers adjust the light with reverse phase control, where the dimmer chops the back part of the AC wave to deliver less or more 0-10V DC low voltage dimmers operate using two low voltage dimming wires that are separate from the 120V or 277V AC power. The dimmer sends a variable output voltage to the fixture based upon the dimming level. 10V corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled with the 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires (color coded violet and gray). HiLume and EcoSystem dirvers provide continuous dimming from. For a complete list of compatible dimmers and controls, please visit Use DALI approved controls for dimming eldoled MVD7 () and MVD9 (0.) options. R4 Series* R4/R6 Series R4/R6 Series R6 Series* eldoled ECOdrive 0-10V eldoled SOLOdrive 0-10V Dimming Options 12D, 27D, MVD Dimming Options 12D6, 27D6, MVD6 Dimming Options 12D8, 27D8, MVD8 Manufacturer Product Model Ariadni TGCL-153P Ariadni TG-600P 13%-100% DVCL-153P DV600P 6%-100% DVELV303P 6%-100% DVTV 0. Faedra FAELV500 12%-100% Lumea LG600P 8%-100% Maestro MAELV600 16%-100% Nova NFTV 0. Nova T NTFTV 0. S-603PG 5%-96% S600P 5%-100% SELV300P 10%-100% CT103P 9%-100% IPI06-1LZ Vizia VPE06 9%-100% Trimatron 6683-IW 6%-100% Decora %-100% 6633-P IPE04 6%-100% IP710-DLX 0. Pass & Seymour Titan CD4FB-W 0. Watt Stopper Miro Decorator DCLV1 0. Synergy ISD BC 0. Devine DLC03P Skye SLC03P 0%-100% Decorator DAL06P 0%-100% *277V Triac dimming is not available Notes 1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information. 5. Consult factory for additional dimming information. 10

9 DIMMING COMPATIBILITY 2" LED DOWNLIGHT: R2ANC, R2ARM Incandescent 120VAC dimmers adjust the light with forward phase control, where the dimmer chops the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required. Electronic vow voltage 120VAC dimmers adjust the light with reverse phase control, where the dimmer chops the back part of the AC wave to deliver less or more 0-10V DC low voltage dimmers operate using two low voltage dimming wires that are separate from the 120V or 277V AC power. The dimmer sends a variable output voltage to the fixture based upon the dimming level. 10V corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled with the 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires (color coded violet and gray). HiLume and EcoSystem dirvers provide continuous dimming from. For a complete list of compatible dimmers and controls, please visit Use DALI approved controls for dimming eldoled MVD7 () and MVD9 (0.) options. R6W Series* R6W Series eldoled ECOdrive 0-10V R6W Series eldoled SOLOdrive 0-10V Dimming Options 12D, 27D, MVD Dimming Options MVD6 Dimming Options MVD8 Model Product Ariadni TGCL-153P 8%-100% Ariadni TG-600P 15%-100% DVCL-153P 3%-100% DV600P 9%-100% DVELV303P 10%-100% DVTV 0. Faedra FAELV500 15%-100% Lumea LG600P 10%-100% Maestro MAELV600 15%-100% Nova NFTV 0. Nova T NTFTV 0. S-603PG 7%-96% S600P 6%-100% SELV300P 10%-100% CT103P 12%-100% IPI06-1LZ 2%-100% Vizia VPE06 12%-100% Trimatron 6683-IW 8%-100% Decora %-100% 6633-P 3%-100% IPE04 7%-100% IP710-DLX 0. Pass & Seymour Titan CD4FB-W 0. Watt Stopper Miro Decorator DCLV1 0. ISD BC Synergy Manufacturer 0. *277V Triac dimming is not available Notes 1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information. 5. Consult factory for additional dimming information. 11

10 NON-DIMMING & DIMMING DRIVERS: ACCENT LIGHTING Because LEDs operate at a lower current than traditional light WIRE NUT sources, most LED fixtures must be powered by an LED driver. When selecting a driver, follow these steps: 1. Verify the appropriate current (typically 350mA or 700mA) 2. Select a driver with enough usable wattage for the fixtures you ve selected. 120V AC INPUT 18AWG solid or tinned stranded wire (+) RED (-) BLACK LED DRIVER HOT (BLACK) NEUTRAL (WHITE) BLACK LED LEAD RED LED LEAD LEDs in series should be connected with black wire of one LED to red wire of next LED, etc. All codes requiring Class II splice compartments must be followed CLASS II PLENUM WIRE 18" Included with driver. Additional length available; Part No: 18-2 SOL CL2P MODEL CURRENT NON-DIMMING DRIVERS WATTAGE RANGE Drivers provide constant 350mA or 700mA output DC constant current output Serial connection required from fixture to fixture Short-circuit protection Meets UL, CSA and FCC requirements Class II LED driver must be maintained within an enclosure that meets local building codes and NEC For additional configurations, consult factory INPUT VOLTAGE NON-DIMMING DRIVERS. MOUNTING DISTANCE DIMMING DRIVERS LENGTH WIDTH HEIGHT LED mA 1.0W 3.2W V 65-1/2' 2" 1-5/8" 7/8" LED mA 1.0W 11.5W 120V 108' 5-1/4" 7/8" 7/8" LED mA 6.3W W V 65-1/2' 6-5/8" 1-5/8" 1-1/4" LED mA 10.5W W V 65-1/2' 4-1/8" 2-3/4" 1-1/4" LED mA 2.0W - 3.5W V 65-1/2' 2" 1-5/8" 7/8" LED mA 5.6W W V 65-1/2' 6-5/8" 1-5/8" 1-1/4" LED mA 2.0W W 120V 108' 5-1/4" 1-5/8" 7/8" LED mA 8.4W W V 65-1/2' 4-1/4" 2-3/4" 1-1/4" LED350-15D1D2- UNV-3 DIMMING DRIVERS 350mA 2.0W W 120V/277V 65' 3-1/3" 1-1/2" 1" LED700-12D mA 3W - 12W 120V 100' 4-7/8" 1-1/3" 3/4" LED700-22D mA 7W - 22W 120V 100' 4-3/4" 1-1/2" 1" Non-Dimming Drivers LED3503-3W/350mA Driver LED7003-3W/700mA Driver Drivers provide constant current 350mA or 700mA output There must be at least two (2) fixtures on these drivers to operate properly Serial connection required from fixture to fixture Compatible with standard dimmers; leading edge, trailing edge and universal Fully protected: short circuit, input high voltage, inherent thermal protection and over voltage protection Self re-settable Meets UL, CSA and FCC requirements Class II LED driver must be maintained within an enclosure that meets local building codes and NEC For additional configurations, consult factory LED W/350mA Driver LED W/700mA Driver LED W/350mA Driver LED W/700mA Driver Dimming Drivers LED350-15D1D2-UNV-3-15W/350mA Dimmable Driver (Triac,0-10V) LED700-12D W/700mA Dimmable Driver LED700-22D W/700mA Dimmable Driver LED W/350mA Driver LED W/700mA Driver LED Driver Accessories 18-2 SOL CL2P Class II Plenum Wire (Sold in Foot Increments) 12

11 + + DC12V POWER SUPPLY 120VAC Cord & Plug or Hard Wire TAPELIGHT DIMMING ConTech LED Tapelight is dimmable utilizing either the + TLPDIM10V Dimming Module or the TLPDIMWP Wall Mount Dimmer. IN OPTOTRONIC OT DIM The 0-10V Dimming Module (TLPDIM10V) is designed + for use with commercially available 0-10V dimmers. 0-10V dimmers are commonly used for LED lighting systems due to their fine performance and reliability. Compatible with quality 0-10V dimmers, this module will dim down to 15%. + + DC12V POWER SUPPLY 120VAC Cord & Plug or Hard Wire + IN + OPTOTRONIC OT DIM 0-10V Dimmer supplied by others The Wall Mount Dimmer (TLPDIMWP) contains on-board dimming capabilities and dims down to 0%. It has an attractive appearance that blends with most decors and requires no junction box to mount. 120VAC Cord & Plug or Hard Wire POWER SUPPLY For additional instructions, please refer to the installation POWER SUPPLY instructions 120VAC DC12V on our website Cord & Plug or Hard Wire DC12V POWER SUPPLY/DISTANCE CHART ConTech POWER SUPPLY INPUT VOLTAGE: 12V DC MODEL NO. WATTAGE STANDARD 1.2W/FT HIGH 1.8W/FT SUPER HIGH 3.6W/FT RGB* 3.9W/FT SIDE EMITTING STAND. 0.65W/FT SIDE EMITTING HIGH 1.4W/FT TLP12VP24 24W 14 FT 14 FT 10 FT 10 FT 5 FT 5 FT 5 FT 5 FT 30 FT 30 FT 14 FT 14 FT TLP12VP36 36W 17 FT 17 FT 12 FT 12 FT 6 FT 6 FT 5.5 FT 5.5 FT 32 FT 34 FT 17 FT 17 FT TLP12VP60 60W 22 FT 26 FT 17 FT 17 FT 10 FT 10 FT 7 FT 9 FT 32 FT 50 FT 22 FT 26 FT TLP12VHW20 20W 22 FT 36 FT 17 FT 28 FT 12 FT 16 FT 7 FT 10 FT 32 FT 78 FT** 22 FT 40 FT TLP12VHW60 60W 22 FT 36 FT 17 FT 28 FT 12 FT 16 FT 7 FT 10 FT 32 FT 78 FT** 22 FT 40 FT TLP12VHW W 22 FT 36 FT 17 FT 28 FT 12 FT 16 FT 7 FT 10 FT 32 FT 78 FT** 22 FT 40 FT ConTech POWER SUPPLY INPUT VOLTAGE: 12V DC WET OUTDOOR WATTS PER FOOT: 1.8 MODEL NO. TYPE WATTAGE 1 TLPO12VP36 Plug-In 36W 20 ft. TLPO12VP60 Plug-In 60W 32.8 ft. *RGB Is at full power (all three LEDs are illuminated). Power consumption may vary based on color changing program. **Max split can be split more than once, without exceeding the max single run in each leg. Max Run refers to the total single run of tapelight that can go on a power supply. Max Split refers to the total amount of tapelight that can go on a driver if it were separated into two runs. Max Run lengths are calculated with 12V DC at the start of the tape run. Voltage drop may occur if not using proper wire gauge. Please refer to the Power Supply Wiring Chart. Max Run lengths above are calculated with no more than 30% light loss from the start of the tape run to the end of the tape run for optimal light consistency. If run lengths are extended beyond the recommended lengths noted above, there will be inconsistent light output and voltage drop. 1. Overall distance of LED tape under load [illuminated sections]. If exceeded damage to the power supply and LED tape may result. POWER SUPPLY WIRING CHART (Copper Wire) Wire Gauge Distance* 6 ft. 10 ft. 15 ft. 23 ft. 40 ft. *Power Supply to First LED Tape Section; 12 Gauge Wire Recommended 13