Supplied Air Respirators page 3. Air Purifying Respirators page 8. Head, Eye & Face Protection page 13. Hearing Protection page 22

Transcription

1 Supplied Air Respirators page 3 Air Purifying Respirators page 8 Head, Eye & Face Protection page 13 Hearing Protection page 22 Fall Protection page 23 Thermal Imaging page 27 Portable Instruments page 29 Fixed Gas and Flame Detection page 35 Note: This Bulletin contains only a general description of the products shown. While uses and performance capabilities are described, under no circumstances shall the products be used by untrained or unqualified individuals and not until the product instructions including any warnings or cautions provided have been thoroughly read and understood. Only they contain the complete and detailed information concerning proper use and care of these products. MSA (India ) Limited Ecostation Level-16 (Floor)Plot No.7, Block BP Salt Lakes, Sector V Kolkata India Phone: to 64 Fax: india@msasafety.com Offices and representatives worldwide For further information:

2 Supplied Air Respirators Air Purifying Respirators Head, Eye & Face Protection Hearing Protection Fall Protection Thermal Imaging Fixed Gas and Flame Detection Portable Instruments MSA India Safety Solutions

3 MSA - The Safety Company A Worldwide Partner To Rely On About MSA Established in 1914, MSA is the world's leading manufacturer of sophisticated safety products designed to protect people throughout the world. The Company was founded by Two Visionary Mining Engineers with a dream to PROTECT the Life of Miners. With headquarters located in Cranberry, USA, MSA employs approximately 4,500 associates and maintains operations that extend around the world. These resources include manufacturing operations on five continents and more than 30 international locations that help protect lives in more than 140 countries. MSA in India MSA India was established in 1965 with the aim of supplying safety equipments to Indian mines. From then till today MSA has diversified its safety business into almost all the manufacturing industry segment present in India and is today one of the most preferred safety brand in India. MSA India is now a 100% owned affiliate company of MSA International Pittsburgh with its latest state-of-the-art corporate office at the ECOSTATION in 2nd para. The company has undertaken a major re-vamping process to streamline its Sales, Distribution and Marketing functions with a focus on providing the World Standard products at local affordable prices. With "The Central Logistics Hub" (CLH) in Navi Mumbai and "The Technical Support Centre", Navi Mumbai and Ecostation in Kolkata, our company is ready to cater to the growing need of its customers in India. MSA India Service MSA India is now equipped to provide comprehensive service plan to ensure that your equipments and systems are reliable, economical and always ready for use. With Service Centres in Mumbai and Kolkata our customers can be given active, prompt and efficient support by trained, qualified and MSA Certified Service Engineers working on-site all over India. For product repair questions or concerns, you may contact in.service@msasafety.com Our Mission MSA's mission is to see to it that men and women may work in safety and that they, their families and their communities may live in health throughout the world. Our vision is to be the leading innovator and provider of quality products, related technologies and services that protect people's health, safety and the environment in all key markets MSA serves. Registered & Head Office, KOLKATA Central Logistics Hub, NAVIMUMBAI 1

4 Integrated Safety Solutions Total Protection MSA s comprehensive product portfolio ranges from simple to complex high-techn solutions. The great breadth of technologies, products and service we offer is unique to the market. MSA products are designed to ensure the integrated system compatibility of individual safety and gas detection products. MSA s own software integrates perfectly into our range of hardware. Fire Service Oil, Gas, Petrochem Utilities Government Personal Protective Equipment & Gas Detection Transportation Mining Construction General Industries This catalog gives you an overview on MSA s product portfolio in India: Supplied Air Respirators Air Purifying Respirators Fall Protection Thermal Imaging Head, Eye & Face Protection Hearing Protection Permanent Gas Detection Portable Instruments 2

5 Supplied Air Respirators Independent of the Ambient Atmosphere MSA offers various Supplied Air Respirators (SAR) that function independently of the ambient air. The self contained breathing apparatus system, including the AirGo and AirMaXX models, is independent of the ambient atmosphere, meaning the user is not tied to a specific location. They offer a wide variety of features and applications. MSA offers the monitoring systems alpha Personal Network with telemetric capabilities and the personal alert safety system motionscout. MSA s chemical oxygen apparatus are ideal for escape/ or working applications wherever outbreaks of toxic gases, particles or the sudden occurrence of oxygen deficiency are to be expected. The Airline system is designed for applications of extended duration; e.g. in confined spaces. This system connects to an external air supply, offering cost effective protection. If you have to be prepared for situations where sudden oxygen deficiency can occur, an MSA compressed air escape device is an option well worth considering. 3

6 Supplied Air Respirators Breathing Apparatus AirXpress In building the AirXpress, an SCBA system made for tight budgets, MSA has concentrated on those features most essential for safety and performance. To meet the specialised demands of industry and emergency response, the MSA AirXpress comes in two configurations: AirXpress Industrial and AirXpress Fire. The AirXpress first-stage pressure reducer is the same one used in all MSA systems. This patented and choice component distinguishes itself through reduced parts and low maintenance, which translates into reduced cost of ownership. Like all other MSA SCBA systems, all components on the AirXpress are designed to last long in rugged circumstances. They are EN 137:2006 approved to withstand high temperatures, flames and rough handling plus they are intrinsically safe and ATEX-approved for zone 0 environments. AirXpress Fire BD Backplate: word-renowned design AutoMaxx-AS demand valve Gauge cap Pneumatic systems based on the alpha platform Padded harness, with reflective logo on the shoulder strap Integrated transponder for storage control I01AX AirXpress FIRE backplate with AutoMaXX DV, 3S PS MaXX Mask with Light Weight Steel Cylinder and HBA 10 valve I01AX I01AX I01AX I01AX I01AX AirXpress FIRE Backplate with AutoMaXX DV, 3S PS MaXX Mask without Cylinder & Without Valve AirXpress FIRE backplate with AutoMaXX DV, 3S PS MaXX Mask with Carbon Composite Cyl and HBA-10 Valve AirXpress FIRE Backplate with AutoMaXX DV, 3S PS MaXX Mask with Carbon Composite Cyl and MSA Valve AirXpress FIRE Backplate with AutoMaXX DV, 3S PS MaXX Mask with 6Ltr Steel cylinder and MSA Valve AirXpress FIRE with 2nd Man connection backplate with AutoMaXX DV, 3S PS MaXX Mask with Light Weight Steel Cylinder with HBA-10 valve AirXpress Fire Version with AutoMaxx Demand Valve Back Plate AirXpress Fire Version with AutoMaxx Demand Valve Back Plate with 2nd Coneection 4

7 Supplied Air Respirators AirGo Series When you are looking for a strength carrier for firefighting and for a wide range of maintenance or rescue operations, the AirGo Series of Breathing Apparatus is ready for deployment. Its rugged reliability, flexibility and great value make it a popular choice for fire brigades, plant, sub-surface or offshore use. Weight is distributed evenly and kept close to your body to reduce stress and fatigue. The AirGo SCBA is specifically designed for emergency response and escape. On ships or industrial facilities, fire fighting where such units are mandatory, the AirGo is an obvious choice. The lung governed demand valve AutoMaXX-AS is fixed to the medium pressure line. The nofrills system keeps costs at a minimum without sacrificing safety. The alpha Single Line pneumatic system integrates warning signal, second connection and gauge in an easily accessible manifold at your chest. The optional alpha Personal Network offers extended electronic and telemetric monitoring and communication capability. The vital pneumatic and carrier components are the same as those used in the highend MSA BA Sets, making AirGo a fully-fledged device for the toughest applications including firefighting. Various harness options ranging from very low cost com harness to high cost Pro harness available with the set Approved as per EN137 Class AirGo Compact with AutoMaXX Demand Valve Back Plate AirGo Pro SL Black Plate Airgo pro CL with ICU, bumper, retainer and long strap I01AG AirGOPRO SL SCBA set with AutoMaXX-AS D. Valve,3S-PS-MaXX Mask with 6.8Lt CFK cylinder and valve and carrying case AirMaXX The AirMaXX SCBA combines premium eronomic features with advanced technology to provide the best experience in SCBA wearability available today. The ergonomically designed and optimally balanced AirMaXX backplate is adjustable to fit all body sizes. This works in conjunction with the premium S-swing shoulder pads and swivelling hip belt to distribute weight evenly while increasing freedom of movement. Stress and fatigue are reduced as you perform your job without restrictions. The AirMaXX stays with you even when you are turned upside down. The alpha Single Line pneumatic system integrates warning signal, second connection and gauge in an easily accessible manifold at your shoulder. The optional alpha Personal Network offers further electronic and telemetric monitoring and communication capability. If you are using your SCBA frequently, for long periods at a time or require absolute concentration in your work, the AirMaXX is the system of choice. Approved as per EN AirMaXX SL Back Plate AirMaXX CL S with ICU Back Plate AutoMaXX AS Demand Valve 5

8 Supplied Air Respirators Performance & Ergonomics Respiratory Protection Enhancements & Monitoring alphascout & alphamitter The alphamitter, a short-range transmitter on the SCBA back plate sends air pressure data to the alphascout every second. Because the wireless alphascout is independent of the back plate, the number of units needed by a brigade can be reduced by up to 75% - a dramatic saving in investment. Ask your MSA sales representative for more information. alphabase Forthe base station you can choose between several sender/receivers. The alphabase standard works in combination with any Pc. An external aerial with magnetic foot can optionally be used for vehicle mounted applications. A battery-powered version of the alphabase or the alphabase standard can also be used with the xplore TABLET PC. The combination battery-powered alphabase and xplore TABLET PC allow full freedom of movement for mobile applications. Please contact MSA representative for exact configuration Back plate with Telemetry options with alphamitter alphascout TM Telemetry Module (complete set incl. long-distance radio,batteries, alphatag) alphabase Standard (incl. power supply, direct and external aerial with magnetic foot and software) DVD : Sotware alphacontrol Alpha HUD xplore TABLET TAGwriter (incl. USB cable) MotionSCOUT Personal Alert Safety System motion SCOUT The next generation of standalone personal alert safety systems motion SCOUT detects the cessation of bodily movement and activates an automatic alarm. For enhanced safety the alarm can be activated manually as well. With highly visible LEDs and an alarm volume of at least 95 db it helps to locate the person in danger. The sensitive, electronic motion sensor recognises all normal body movements. A bicolour LED clearly shows the readiness of the unit. Maintenance-free and durable [IP 67] it guarantees a great cost-performance-ratio. motion SCOUT is extremely simple to use and can be easily affixed to the shoulder strap or hip belt motionscout T [temperature sensor] motionscout Personal Alert Safety System 6

9 Supplied Air Respirators SCBA Accessories Accessories and Spares S PS MaXX Full Face Mask Ultra Elite PS MaXX Full Face Mask Light Weight Cylinder with Cylinder Valve ( ) Light Weight Steel Sylinder with Cylinder Valve (HBA-10) CARBON COMPOSITE CYLINDER W/O VALVE 6.8 ltr * 300 bar Cylinder Valve Integrated Control Unit (ICU) CARRYING CASE FOR BA Set Respihood Complete CARBON COMPOSITE CYLINDER 6.8 ltr x 300 bar With MSA valve L Self Locking Wheel operated valves for Breathable air cylinder, HBA-10 Other Supplied Air Equipments S-CAP-AIR 15 w/o Cylinder Ltr 200 Bar Steel Cylinders required for S-CAP AIR w/o Valve ESCAPE HOOD, S-CAP in Carton ESCAPE HOOD, S-CAP in Wall Box ltr 300 bar carbon composite cylinder for S cap air 7

10 Ambient-Air-Dependant Protection Air Purifying Respirators Filtered respiratory protection is dependent on the ambient atmosphere. Local regulations concerning the use of filtering devices must be observed. In order to use filtering respirators, the type, properties and composition of the hazardous agent in the ambient air must be known. The oxygen content in the inhalation air must be sufficient (for example according to German regulations: at least 17 vol %). When using particle filters, no hazardous gases may be present; when using gas filters, no hazardous particles. In case of doubt, a combined filter must be used. The most frequently used filters are of the ABEK type, which protect against many hazards at the same time, due to the wide range of protection that they provide. Based on EN 14387, these filters have an application range covering the code letters A, B, E and K. Benefits for the user include: safe selection, no mix-ups, economical procurement, simpler stockkeeping. High-grade multiple range filters have an even greater sphere of application, e. g. the combined filter 93 ABEK CO NO Hg/St or 93 A2B2E2K2 Hg/St. 8

11 Air Purifying Respirators Protection Against Gases & Particles Full Face Masks 3S Basic Plus The 3S Basic Plus is provided for use with respiratory protective filters [screw-type filters with thread to EN 148-1], assisted and non-assisted fresh air breathing apparatus, air-line systems and Powered-Air-Purifying-Respirators. It is not approved for use by fire departments or as face piece in combination with compressed-air breathing apparatus [certified to EN 136, Class 2]. The 3S Basic Plus faceblank is made of a skin-compatible and largely age-resistant natural rubber formulation. It offers the same good properties the 3S mask series is known for. The acrylic [PMMA] lens is scratch-resistant and almost unbreakable. Moreover it offers a good field of vision. The visor is fitted with a white lens frame and is easy to replace. D S Basic Plus Full Face Mask Half Face Masks Advantage 400 Series Half Mask Respirators The Advantage 420 Half-Mask Respirator is uniquely designed to incorporate userfriendly features including maximum comfort, improved donning and fit, enhanced safety, and reduced maintenance cost. The Advantage 420 Respirator has a Patentpending UniBond over-molded one-piece silicone facepiece, helping to eliminate possible leak paths which may be present in other competitive silicone half-mask respirators. All plastic MSA Advantage cartridges as well as metal MSA Comfo threaded cartridges can be used with the Advantage 420 Respirator. Maximum Comfort Head harness and facepiece integrate well with other PPE Drop-down harness position allows respirator to be removed while retaining head protection One-piece ComforTop cradle headband eliminates pressure points when head protection is worn Improved Donning and Fit AnthroCurve II multi-ethnic face seal based upon new proposed NIOSH test panel improves fit-testing among diverse workforce Patent-pending lock-down harness position allows a personal fit without further user adjustments Advantage 420 Half Face Respirator medium 9

12 Air Purifying Respirators Advantage 200 LS Half Mask Respirator The Advantage 200 LS Respirator's Lighter and Softer facepiece is made from a clear blue formulation of thermoplastic rubber to give workers more comfort and stability than ever. Extensive anthropometric research led to the Advantage Respirator's unique design. MSA's engineers examined facial form data of over 8,000 people and, with CAD technology, developed the Anthrocurve! Sealing Surface, which instantly conforms to each wearer's unique facial characteristics. The unmatched fit and comfort start with a soft, pliable combination of rubber and plastic that provide a virtually customized fit. These are key components in the patented MultiFlex System that equalizes pressure on the faceseal area, while delivering exceptional stability, so the respirator will not collapse during wear Advantage 200 Half Face Respirators Respiratory Filters MSA offers a wide range of filters, for protection against organic or inorganic gases & vapours according to the required protection range. Gas filters are available in Class 1 & 2, Single or multiple range filters (ABEK). Combined filters can be used for protection against organic & inorganic gases & vapours, according to the required the protection range as against solid & liquid particles. The service time of respiratory filters depends on the conditions of use. For gas or combined filters that are used against gases, the end of a filter's service life can usually be detected by odour, taste or irritation during inhalation. Some filters have a specified maximum service time [CO filter cartridges, combined filters 89 Hg/St]. For particle filters or combined filters that are used against particles, the end of service time can be detected by an increase in inhalation resistance. With combined filters - depending on the predominant protective function - both criteria must be observed. Particle filters must only be used once against radioactive contaminants, spores, bacteria, virus and proteolytic enzymes Gas Filter 90 AB Gas Filter 90 K Gas Filter 90 ABEK Gas Filter 90 ABEK Combined Filter 92 ABEK2/St ABEK2Hg/St combined filter Comb. Filter 93ABEK-CO-NO-Hg/St 10

13 Air Purifying Respirators Advantage 3000 Respirator Enhances worker performance through a design that allows even lower breathing resistance, a standard nosecup that reduces fogging and a soft, pliable silicone facepiece. A scratch resistant, wraparound lens engineered to be optically correct eliminates distortion for superior visibility and peripheral vision. Advantage 3000 uses the same cartridges and filters as the Advantage 200LS respirator. Pre-adjustable straps deliver a consistent fit, time after time. The preset upper straps prevent uncomfortable snags during donning and doffing and provide a tighter, more secure seal. Wearers can choose the new European-style Advantage harness, which dons like a catcher s mask. Exceeds the performance requirements of ANSI Z87.1. Designed to meet the National Institute for Occupational Safety and Health (NIOSH) and EN standards Advantage 3000 Full Face Respirators Respirator Cartridges Designed for easy installation, Advantage cartridges use the latest bayonet-style mounting design. Featuring a low lug height and lead-in connectors, the cartridges lock into place with a single twist. An advanced engineering design makes negative pressure fit-testing easier to perform. The complete Advantage line of particulate, chemical and combination cartridges are approved under 42 CFR Part 84. The Occupational Safety and Health Administration (OSHA) requires fit tests to ensure proper fit for workers who use respirators. Filter cartridges protect against dusts, particles and mists. Chemical cartridges protect against gases and vapors. Combination cartridges deliver protection from both particulate and gaseous contaminants. All cartridges are interchangeable between the Advantage 200 and 3000 respirators and are color-coded. Most are incinerable GMA cartridge for Advantage Respirator (Pack of 02) GMC cartridge for Advantage Respirator (Pack of 02) GME cartridge for Advantage Respirator (Pack of 02) MERSORB CARTRIDGES FOR ADVANTAGE (Pack of 02) GMA P100 CARTRIDGES FOR ADVANTAGE RESPIRATOR (Pack of 02) GMC P100 cartridge for Advantage Respirator (Pack of 02) GME P100 cartridge for Advantage Respirator (Pack of 02) MERSORB P100 Cartridge for Advantage Respirator (Pack of 02) Reusable Snap on cover for N95 (Pack of 02) N95 Snap on Prefilter (Pack of 10) R95 Snap on Prefilter (Pack of 20) Reusable Snap on Cover for R95 (Pack of 02) FLEXI-FILTER P GMB cartridge For Advantage Respirator (Pack of 02) TOWELETTE,INDIVID. PKGD TOWELETTES, 100/BX TOWELETTES,CANISTER OF 220

14 Air Purifying Respirators Powered Air Purifying Respirators (PAPRs) OptimAir 3000 The OptimAir 3000 PAPR system allows you to breathe normally while you work. Your comfort,well-being and ability to perform effectively are greatly enhanced. Filters also last longer. The microprocessorcontrolled, variable-speed motor guarantees an optimum amount of air in your headtop (mask or hood) even as your breathing rate changes during more strenuous tasks. In many situations it is not even necessary to maintain an airtight seal. The pressure differential causes airflow to travel continuously from your face to the outside environment, preventing unfiltered air from entering your headtop OptimAir 3000 PAPR (Standard Blower 130/ min, with comfort belt. Standard charger, standard battery) OptimAir Mask with Hose OptiHood Full OptiHood Hose Accessories and Spares Particle Filter (Pack of 10) A2 TABTEC Filter (Pack of 10) ABEK Filter (Pack of 10) Escape Devices miniscape miniscape is a one-time use escape device fitting into the pocket of any work clothing or carried at the belt. In case of emergency it can be donned very quickly and is immediately operational. Using the TabTec filter, it offers an ABEK-5 protection miniscape S-Cap It has been proven that most victims during dramatic circumstances due to a fire do not get injured by heat or flames but from smoke and gases. S-CAP is an escape hood especially designed to protect persons endangered by smoke and gases generated by fires. The most dangerous of them is carbon monoxide. S-CAP provides an effective protection for eyes, head and especially the respiratory tract, and thus persons can rescue themselves with little risk ESCAPE HOOD, S-CAP in Carton ESCAPE HOOD, S-CAP in Wall Box 12

15 Head, Eye & Face Protection Versatility. Reliability. Comfort. Due to their importance and sensitivity, the protection of the head, face, and in many working environments is a paramount consideration. Whether required for the special, most demanding requirements of firefighters, rescue teams and policemen or the wide field of industrial use, MSA provides a huge selection of the best head protection, integrated or attached face shields, advanced systems for communication and hearing protection as well as fashionable protective eyewear. These products are extremely reliable, comfortable and designed to work perfectly in conjunction with all MSA equipment, e.g. respiratory protectors. Furthermore, a complete range of accessories is available to suit your individual needs. 13

16 Head, Eye & Face Protection Safety & Sight in Perspective Head Protection V-Gard Protective Caps and Hats from MSA consist of a polyethylene shell and suspension system working together as a protection system.v-gard headwear features advanced styling in either cap or hat styles, V- Gard Caps and Hats meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z ,Class E and G MSA CAP V GARD HDPE WHITE WITH STAZON SUSPENSION,Perforated SWEAT BAND MSA CAP V GARD HDPE YELLOW STAZON SUSPENSION,Perforated SWEAT BAND MSA CAP V GARD HDPE ORANGE WITH STAZON SUSPENSION,Perforated SWEAT BAND MSA CAP V GARD HDPE RED WITH STAZON SUSPENSION,Perforated SWEAT BAND MSA CAP V GARD HDPE BLUE WITH STAZON SUSPENSION,Perforated SWEAT BAND MSA CAP V GARD HDPE GREEN WITH STAZON SUSPENSION,Perforated SWEAT BAND MSA CAP V GARD HDPE RED WITH SUSPENSION FAS TRAC II WITH Perforated SWEAT BAND MSA CAP V GARD HDPE BLUE WITH SUSPENSION FAS TRAC II WITH Perforated SWEAT BAND MSA CAP V GARD HDPE GREEN WITH SUSPENSION FAS TRAC II WITH Perforated SWEAT BAND MSA CAP V GARD HDPE WHITE WITH SUSPENSION FAS TRAC II WITH Perforated SWEAT BAND MSA CAP V GARD HDPE YELLOW WITH SUSPENSION FAS TRAC II WITH Perforated SWEAT BAND MSA CAP V GARD HDPE ORANGE WITH SUSPENSION FAS TRAC II WITH Perforated SWEAT BAND Spares Spare Suspension STAZ-ON, PERFORATED SWEATBAND,FOR HDPE SHELL Spare Suspension FAS TRAC II Perforated SWEAT BAND,FOR HDPE SHELL Add Ons L Chin Strap For V Gard (For China Make FasTrac n SOS) D CHIN STRAP,2 POINTS, attached to Shell D CHIN STRAP,2 POINTS, attached to suspension 14

17 Head, Eye & Face Protection Vented V gard 500 Caps provide cooling vents for improved air circulation and comfort. Vented V gard 500 Caps meet or exceed all applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z Non-vented meets Class E and Vented meets Class C Vented V gard 500 Caps With 4 Point Fas Trac Ratchet Suspension (White) Vented V gard 500 Caps With 4 Point Fas Trac Ratchet Suspension (Blue) Vented V gard 500 Caps With 4 Point Fas Trac Ratchet Suspension (Yellow) Vented V gard 500 Caps With 4 Point Fas Trac Ratchet Suspension (Red) Vented V gard 500 Caps With 4 Point Fas Trac Ratchet Suspension (Green) Vented V gard 500 Caps With 4 Point Fas Trac Ratchet Suspension (Orange) Spare suspension for V gard POINT FAS TRAC SUSPENSION (Spare) for Vented V gard 500 caps ADD Ons Chin Strap for V Gard Advance Full brim hats These V-Gard Protective Hats are the best-selling in North America. Polyethylene shell and self-adjusting crown straps provide comfortable, lightweight protection V Gard Hat Non-Slotted WHITE w/fas-trac Suspension V Gard Hat Non-Slotted BLUE w/fas-trac Suspension V Gard Hat Non-Slotted GREEN w/fas-trac Suspension V Gard Hat Non-Slotted RED w/fas-trac Suspension V Gard Hat Non-Slotted ORANGE w/fas-trac Suspension V Gard Hat Non-Slotted YELLOW w/fas-trac Suspension Helmet Lights MSA offers two helmet lights that fit into our special cap adapters, Both of the lights are FM and CSA-approved for intrinsic safety, and are non-incendive * VersaLite Helmet Light with 2 AA alkaline batteries ** Stealthlite Helmet Light (batteries not included) Light holder for slotted cap, no metal parts 15

18 Head, Eye & Face Protection V-Gard Accessory System The V-Gard Accessory System is a full line of frames, visors and chin protectors that meet many global standards, including ANSI/ISEA Z , CSA Z94.3, EN166 and AS/NZS 1337, as well as many local standards. Convenient. Compliant. Compatible. That's the V-Gard Accessory System from MSA. Introducing the V-Gard Accessory System frames, visors, and chin protectors designed for MSA V-Gard Helmets. Reliable accessories offering the same high standards of protection as the V-Gard Helmet. And for those who prefer other MSA helmets (such as the Skullgard Helmet), a universal version of the V-Gard Frame fits any MSA slotted or non-slotted helmet. Frames The V-Gard Accessory System offers helmet-mounted frames for various work conditions and MSA helmets. The sloped design allows liquids, chips and other materials to slide off the frame and away from the line of sight. Each frame, whether used with or without debris control, meets the applicable requirements for ANSI/ISEA Z , EN 166, CSA Z94.3 and AS/NZS 1337, as well as many local standards. V-Gard Frames for Slotted MSA Caps V-Gard FRAME FOR MSA SLOTTED CAPS, WITH DEBRIS CONTROL V-Gard FRAME FOR MSA SLOTTED CAPS, WITHOUT DEBRIS CON- TROL3 V-Gard FRAME FOR MSA SLOTTED CAPS, ET, WITHOUT DEBRIS CON- TROL V-Gard Universal Frames for Slotted or Non-Slotted MSA Caps V-Gard UNIVERSAL FRAME FOR CAPS, WITH DEBRIS CONTROL V-Gard Frames for MSA Full-Brim Hats V-Gard UNIVERSAL FRAME FOR CAPS, ET, WITHOUT DEBRIS CON- TROL V-Gard FRAME FOR HATS V-Gard FRAME FOR HATS, ET Headgear V-Gard Headgear is a brow guard that in combination with the wide range of V-Gard Visors comprehensive face protection system. Featuring a durable and stylish HDPE frame and the choice of over 20 visors it is ideal for many applications. With the unique 3-point visor load system visors are fitted or removed easily and quickly. Adjustable to all head sizes and with two comfort sweatbands all day comfort is for sure V-Gard Headgear Standard, without visor V-Gard Headgear Elevated Temperature, without visor Replacement sweatband brow, 5 pcs 16

19 Head, Eye & Face Protection Visors V-Gard Visors for General Purpose Applications These visors are made of durable polycarbonate or mesh, and help protect wearers from flying debris, splash or spray1. All V-Gard Visors for general purpose can be worn with cap-mounted earmuffs CLEAR, PC, SIDE CONTOURS PC 8" (20.3 cm) x 17" (43.2 cm) x.04" (1.02 mm) CLEAR, PC, SIDE CONTOURS PC,CLR,MEDxSTDxLTW 9.5" (24.1 cm) x 17" (43.2 cm) x.04" (1.02 mm). CLEAR, PC, SIDE CONTOURS, AF/AS 8" (20.32 cm) x 17" (43.2 cm) x.06" (1.52 mm). GREEN TINT, PC MOLDED, AF/AS10.375" (26.4 cm) x 17" (43.2 cm) x.098" (2.5 mm). V-Gard Visors for Chemical and Splash Applications These propionate visors are for chemical and splash applications, and are ideal for use in manufacturing plants, laboratories and other industrial applications that demand face protection against impact hazards, abrasive particles, splash and spray.1 Molded V-Gard Visors are manufactured with hand-polished molds for unsurpassed, distortion-free optical clarity CLEAR PROPIONATE, MOLDED 8" (20.3 cm) x 17" (43.2 cm) x.098" (2.5 mm) CLEAR PROPIONATE, MOLDED 9.25" (23.5 cm) x 18" (45.7 cm) x.098" (2.5 mm). V-Gard Visors for Elevated Temperature Applications These PC visors help keep workers comfortable in environments such as steel/smelting plants where they are exposed to high levels of heat and/or excessive glare. Our V-Gard Visors are engineered for heavy duty use and are thicker than most visors in the marketplace, which not only helpsensure impact resistance, but also reduces heat warping CLEAR PC, MOLDED, AF/AS 9.25" (23.5 cm) x 17" (43.2 cm) x.098" (2.5 mm) GREEN TINT PC, MOLDED, AF/AS 9.25" (23.5 cm) x 17" (43.2 cm) x.098" (2.5 mm). GREEN TINT PC, REFLECTIVE COATING, MOLDED 9.5 (24.1 cm) x 17.75" (45.09 cm) x.07 (1.78 mm). 17

20 Head, Eye & Face Protection V-Gard Visors for Welding Applications These PC visors help protect against damage from impact and infrared (IR) radiation. Designed for welding, metal pouring, gas soldering, and light cutting/brazing, they re engineered for heavy-duty use. They are thick to help prevent warping from heat or weld spatter SHADE 3 IR, PC, MOLDED 8 (20.3 cm) x (43.8 cm) x.07 (1.8 mm). SHADE 5 IR, PC, MOLDED 8 (20.3 cm) x (43.8 cm) x.07 (1.8 mm). V-Gard Visors for Arc Flash Applications These PC visors are engineered to help protect against impact and dangerous arc flash hazards. Perfect for electrical workers and electricians working with high-voltage connections. Rated to 12.9 cal/cm2 when tested to ASTM F (ref. NFPA 70E-2012, Hazard Risk Category 2), and when worn with a V-Gard Hard Hat (PN ) and V-Gard Frame (PN ) ARC, PC, MOLDED 9.25 (23.5 cm) x 18 (45.7 cm) x.065 (1.7 mm).). Accessories STANDARD CHIN PROTECTOR Slot adaptors (2 pair) Debris control for V-Gard Cap Frames Heavy duty rubber strap for V-Gard Universal Cap or Hat Frames. 18

21 Head, Eye & Face Protection Eye Protection MSA offers a wide range of Eye Protectors & Soft frame Goggles to effectively fit most facial contours. Large, one-piece,.060-inch-thick polycarbonate lens provides wide, undistorted field of vision. Optional Anti-Fog Coated Lenses are available for work involving high humidity, temperature changes or greater worker exertion. The scratch-resistant coating is unaffected by most regularly used industrial chemicals. Industrial Protective Eyewear is designed for protection against impact hazards and/or flying particles, dust, sparks, and glare. Industrial Protective Eyewear provides excellent sideand front-impact protection while still being comfortable to wear. All MSA Eye protectors conforms / approved to applicable requirements of EN166 & ANSI Z FL 250 HC Clear Frame Clear Lens HC Clear Frame, Clear HC Lens HC Black Frame Smoke Lens HC Black Frame, Clear HC Lens HC Black Frame, Smoke Lens AF Black Frame Clear Lens W None Clear Frame, Clear Lens HC Black Frame, Clear HC GIV-2000 None Clear Frame, Clear Lens HC Black Frame, Smoke Lens Spectacle HC Slate Frame, Smoke Lens Clear Lens Spectacle TA 30 HC Over Spectacle GIV-2000 AF Clear Frame, Clear Lens HC Clear Frame, Clear Lens HC Grey Frame, Smoke HC Lens GIV 2400 AF Grey Frame, Clear Lens GIV-2100 None Clear Frame, Clear Lens AF Clear Lens AF Smoke Lens 19

22 Hearing Protection Comfort & Performance by Design Guarding people against the daily hazards of noise is of paramount concern in countless industries. The challenge is to balance personal attenuation devices with comfort and the ability of communication and listening to music, so that workers will wear their hearing protectors all the time. The most important factors to consider when selecting hearing protection are the right performance and wearer comfort. Whether working in noisy environments, for just a few minutes, or for several hours hearing protection is always needed. A worker who takes off his hearing protection because he does not feel 100% comfortable is a worker at risk. MSA offers a wide range of passive and electronic ear muffs as well as ear plugs for DIY (Do-It-Yourself) use, construction, industry, police and other applications. All products are comfortable hearing protectors, designed to prevent the wearer from feeling isolated. All products are comfortable hearing protectors, designed to prevent you from feeling isolated, thereby encouragaing you to use them and so protecting your hearing for the rest of your life. Noise Reduction Rating (NRR) is third-party tested in accordance with ANSI S and EN Also meets CSA Z

23 Hearing Protection Comfort & Performance by Design Hearing Protection Sound Control Sound Control Cap Models are designed for easy attachment to slotted MSA Caps and help to reduce the effects of excessive noise. HPE, EXC, XLS, Economuff headband & cap models are designed specifically for very high noise levels and these powerful muffs are ideal for air fields, power plants and other areas with intense noise. Light weight & comfortable ear pads ensures all day wearing without fatigue & durable design provide protection in dirty environment. Noise Reduction Rating may vary depending on various MSA models Economuff 20 DB EARMUFF, EXC, HEADBAND 26 DB EARMUFF,HPE,HDBAND 31 Db Passive Hear Protn Xls For Slotted Caps LEFT/RIGHT The left/right ear muffs are different from all existing hearing protectors. Individual muffs, especially designed for the left and right ear, compensate for the asymmetric position of the ears on the head. The revolutionary headband design and the thinner, more flexible sealing rings ensure an optimal fit for wearer comfort. Large muffs provide more room for the ear to guarantee the right protection for all shapes and sizes of ears. Unique to the market left/right considers the anatomical individuality of the users. The left/right concept offers various options depending on the application and individual preferences. All options can be combined: low, medium or high attenuation; headband or helmet mounted; yellow, blue, white or grey. Right protection for the right purpose left/right HIGH headband model yellow left/right HIGH headband model White left/right HIGH helmet mounted model yellow left/right HIGH helmet mounted model White 21

24 Hearing Protection Electronic Protection How can users be encouraged to wear hearing protectors when working in harmful noise? There are countless sources of noise directly linked to machinery and industrial processes : electrical machinery, tractors, industrial ventilation systems, diesel engines, chainsaws, wood working equipment, heavy industrial machinery, pumps and compressors,... it is important that the hearing protection used provides sufficient noise attenuation to protect the user, but not so much that users are isolated from their auditory environment. Excessive protection can prevent users from hearing their workmates, alarms and other important signals. The challenge presented by electronic hearing protection devices is the necessity of balancing the requirements of hearing protection with user comfort, ease of communication and the desire to listen to music. left/right is a range of hearing protectors with built in electronic functions that offers protection, communication and pleasure. SOR85502 WW CutOff helmet mounted SOR45000 WW CutOff Headband left/right CutOff Pro Headband Yellow left/right CutOff Pro Headband Blue left/right CutOff Pro Helmet mounted Yellow left/right CutOff Pro Helmet Mounted Blue Others Hygiene kits,left/right ELECT. EARMUFFS 22

25 Fall Protection Durable & Versatile Guarding people against the daily hazards of noise is of paramount concern in countless industries. The challenge is to balance personal attenuation devices with comfort and the ability of communication and listening to music, so that workers will wear their hearing protectors all the time. All products are comfortable hearing protectors, designed to prevent you from feeling isolated, thereby encouragaing you to use them and so protecting your hearing for the rest of your life. Noise Reduction Rating (NRR) is third-party tested in accordance with ANSI S and EN Also meets CSA Z94.2. With over 40 years of experience, MSA now offers a new wide range of hearing protectors with built-in electronics - from basic functions to high-specification communication devices. 23

26 Fall Protection Durable & Versatile Workman Full Body Harness The Workman Harness provides comfortable protection, due to its lightweight components and durable webbing. The vest-style harness, with optional hip D-Rings for work positioning, fits a wide range of body types and sizes. Color-contrasting thigh and torso straps simplify donning. Features include: Economical Abrasion-resistant, strong, durable webbing Yellow polyester webbing for high visibility Web retainer collars to keep excess webbing neat Easy to don and adjust Choice of Qwik-Fit or Tongue-Buckle leg straps for easy adjustment WKM Light Full Body Harness EN MSA Workman Premier Full Body Harness, medium, Qwik-fit leg straps, D-ring 24

27 Fall Protection MSA Energy-Absorbing Lanyards MSA energy-absorbing lanyards are lightweight with a lowprofile body. The shock absorber includes a clear, durable protective cover over the labels to increase service life and allow for easy inspection. Features include: Tear-tape design to keep fall arrest forces below 900 lbf. Choice of single or twin-leg configurations Choice of adjustable or tie-back configurations Meets ANSI Z (R1999), ANSI A10.32, applicable OSHA regulations, and is certified to CSA Z E4 Restraint Lanyards Restraint lanyards are primarily used for travel restriction and work positioning. Lanyards for travel restriction are used to restrain a worker from reaching a fall hazard. Lanyards for work positioning are used for stabilizing a worker at an elevation. They can be ordered in fixed or adjustable lengths. Each lanyard comes with a forged steel, zinc-plated self-locking snaphook attached to each end. Meets ANSI and OSHA standards Single Leg EA LAN,Web,2m,adj,StScCara-StScaf Twin Leg EA LAN,Web,2m,adj,StScCara-StScaf Twin Leg EA LAN,Rope,1.5M,StScCara-StScaf MSA Workman Restraint Lanyard, webbing, 2 m adjustable length, aluminium screwgate carabiner MSA Workman Restraint Lanyard, webbing, 1.5 m fixed length, aluminium screwgate carabiner 25 Self-Retracting Lanyards MSA has set a new standard in the mechanical fall protection market with the Self-Retracting Lanyard (SRL). Never before has the market seen such a state-of-the-art device with so many standard features. With its solid design and fast-acting brake mechanism, you can be confident that the SRL's will be there for you when you need it most. All MSA SRL's feature: A durable, engineered thermoplastic housing to increase service life. Rugged, impact-absorbing protective bumpers for added durability. A field-replaceable lifeline option is available most of the MSA SRL Models. In the event that the webbing should become damaged, this option provides a field-replaceable web lifeline, eliminating costly returns to the manufacturer. A 400-pound working capacity as a standard feature. No annual factory recertification required due to high-quality construction. This not only reduces the cost of ownership, but also eliminates down time. Some MSA SRL's offers an integral load indicator lets you know when it is time to remove the product from service. SRL connector with integral swivel. Meets ANSI Z (R1999), ANSI A10.32 and all applicable OSHA standards, and is CSA certified MSA Workman SRL, 9 m, stainless-steel cable MSA Workman PFL EN, cable, 3.6 m, steel snaphoo, A-PFL-E-12G-0-6-N Aptura SRL, 25 mm nylon web, 9 m, steel snaphook

28 Fall Protection Workman Tripod Easy to Use. Durable. Versatile. You asked for improved ease of use the Workman Tripod delivers! You asked for a minimum of two attachment points on the tripod head the Workman Tripod includes four attachment points! Easy to Use The Workman Tripod is very easy to use. A simple setup procedure makes the process quick and promotes correct use. Features that improve ease of use include: Legs automatically lock in the open position for added safety. A maximum height indicator provides quick and easy identification of the maximum leg extension length. There is no need for a separate pulley/bracket assembly, which makes hoist attachment easier and faster. Accessories can attach to any leg for faster set up. Aluminiumleg and head design reduces weight, improving portability. Telescoping legs (up to 8 ft. high) do not tangle when the unit is collapsed, for easier trans portation and storage. Durable A tripod needs to hold up well under use, and the Workman Tripod does. Built for durability, the unit features: Skid-resistant feet with built-in leg base support strap that improves stability and strengthens the entire system. Cut-resistant pin retention chains that enable an extended service life. An internal leg-locking mechanism prevents accidental disengagement during use and re duces the possibility of damage to the mechanism during use or while in storage. Versatile And as if ease-of-use and durability weren t enough, the Workman Tripod offers great versatility: The leg base support strap also serves as a convenient carrying strap. Tripod legs feature 4-inch incremental adjustments with easy-to-insert ball detent pins. The unit is backwards compatible with the MSA Lynx Hoist and Lynx Rescuer, eliminat ing the need to purchase new equipment or undergo costly upgrades MSA Workman Tripod Side Mount Lynx Hoist with Emergency Drive and Air Drive Adapter, 50' Galvanized Cable Bracket for Lynx Rescuer to mount to Tripod, 10M (30')/ 16M (50') Lynx Rescuer Self Retracting Lanyard with Emergency Rescue 16M (50'), 3/16" diameter, stainless steel cable Pulley/Bracket Assembly for Lynx Tripod Split Mount Pulley 26

29 Thermal Imaging For the Toughest Demands MSA s state-of-the-art Thermal Imaging Cameras (TIC) are invaluable tools for fire fighters and police, e.g. for fast and safe navigation in smoke filled rooms or dark environments. All TIC models feature the same ergonomic design, robust components and extreme durability. The image quality is best-in-class. But the MSA TIC models each feature different resolutions in order to ensure the optimal price-performance ratio for each application. The practical modular system allows all four types of camera to be enhanced with a Video Transmission System or a Video Capture. The Video Transmission System gives the back-up team a clear view of what is happening on the fire ground in real time. Furthermore a unique Video Capture for documentation purposes is easily adaptable to all four cameras. 27

30 Thermal Imaging For the Toughest Demands Evolution 5600 TIC MSA Thermal Imaging Cameras are used by many of North America's largest fire departments. For big city performance with value-driven features, choose MSA's Evolution 5600 Thermal Imaging Camera with high resolution and detailed image quality. This versatile TIC provides detailed images (with a focal plane array of 120 x 120, nominal 15,000 pixels) over a wide temperature range, in addition to safety and other exclusive offerings of MSA's Evolution Series cameras. MSA's highly functional Heat Seeker and QuickTemp functions deliver unmatched performance and superior image quality at all temperatures, employing an easy-touse, timetested design. User-friendly features and enhanced TIC performance help to maintain low lifetime costs. Most TICs trade image quality for a wider temperature range to keep the camera operating in high heat environments. However, the Evolution 5600 TIC provides refined image quality over comparable competitive TICs in Low Sensitivity mode. Only MSA thermal imaging cameras deliver High Sense image quality at up to 3200 F, the temperature range that most often matches that of structural fires. High Sense image detail with Heat Seeker enhancing the heat source with red isotherm Evolution 5600 complete with Heat Seeker Plus, Standard Charger Evolution 5800 complete with User selectable palettes, 2X Digital Zoom, Heat Seeker,Quick Temp and User s (camera only) Ask your MSA sales representative for more information. 28

31 Portable Instruments Total Protection Whatever the Demands Portable measuring instruments and personal monitors can be grouped into three application areas: Combustible Gases There are three elements required to ignite combustible gases: 1. Fuel or flammable gas 2. Heat or a source of ignition 3. Oxygen to support combustion This is known as the fire triangle. If you remove any one of the elements, combustion will not occur. The percentage of combustible gas in the air is also important. According to the ATEX manufacturer directive 94/9/EC and the user directive 99/92/EC, any personal monitor for flammable gases, if used as a safety device to reduce the risk of explosion, has to be performance approved. Any manufacturer seeking ATEX EC certification must demonstrate that their product conforms to EN (or EN 50054) as a minimum requirement for gaining ATEX approval. All MSA combustible gas detectors are designed to comply fully with ATEX standards and can therefore be used as safety devices. Oxygen Instruments to monitor oxygen deficiency or enrichment (measurement in vol.% range), to warn of the danger of asphyxiation or to monitor the inerting of tanks and containers. Toxic Gases In order to recognise and measure toxic substances in the ambient air (typically in ppm parts per million), multi-gas instruments such as ALTAIR 5X are used. 29

32 Portable Instruments Gas Detection You Can Rely On Multigas Instruments ALTAIR 5X Multigas Detector Features & Benefits The ALTAIR 5X Detector allows for an industry-first LEL,O2, CO, H2S, and SO2 60-second span calibration and10-second bump test time. Features include: The ALTAIR 5X Detector is equipped with an internal integral pump. The ALTAIR 5X Detector is powered by the fast MSA XCell Sensor family including the introduction of 3 new sensors. 4-year expected sensor life on LEL, O2, CO, H2S, SO2, IR, and standard 3-year instrument warranty. 3-year expected sensor life on NH3, Cl2, and standard 2-year warranty. The ALTAIR 5X Detector provides an industry-exclusive end-of-sensor-life-warning. MotionAlert feature - man-down alarm InstantAlert feature - manual alarm The ALTAIR 5X Detector is durable, providing industry - leading impact resistance Altair 5X MONO DISPLAY with O2 (0-30%), CO, H2S, LEL 100% without 10 ft. S.Line & 1 ft. probe Altair 5X MONO DISPLAY with O2 (0-30%), CO, H2S, LEL 100% with 10 ft. S.Line & 1 ft. probe Altair 5X COLOUR DISPLAY with O2 (0-30%), CO, H2S, LEL 100%, with 10 ft. S.Line & 1 ft. probe) A-Alt5X-A-N A-ALT5X-A-N-K A-Alt5X-A-N-K-B-1-0 A-Alt5X-A-N-K-D-1-0 A-Alt5X-B-N-K-C-2-0 A-Alt5X-A-N-K-0-1-B A-ALT5X-C-N-K Altair 5X COLOUR DISPLAY with O2 (0-30%), CO, H2S, LEL 100%, SO2 (0-20 ppm) with 10 ft. S.Line & 1 ft. probe Altair 5X MONO DISPLAY with LEL 100% without S.Line & probe - ATO - A-Alt5XAN00000T00Q Altair 5X MONO DISPLAY with LEL 100%, O2 (0-30%)without S.Line & probe ATO Matrix : A-Alt5XANK0000T00Q Altair 5X MONO DISPLAY with O2 (0-30%), CO, H2S, LEL 100%, CL2, without 10 ft. S.Line & 1 ft. probe ATO MATRIX: A- Alt5XANKB100T00Q Altair 5X MONO DISPLAY with O2 (0-30%), CO, H2S, LEL 100%, NH3, without 10 ft. S.Line & 1 ft. probe ATO Matrix : A- Alt5XANKD100T00Q Altair 5X with COLOR DISP, LEL 100%, O2(0-30%), NO2 (0-20 ppm), CO sensor without 10 ft. S.Line & 1 ft. probe ATO MATRIX: A-Alt5XBNKC200T00Q Altair 5X MONO DISPLAY with O2 (0-30%), CO, H2S, LEL 100%, CO2 (IR) 0-10% Vol. w/o 10 ft. S.Line & 1 ATO MATRIX:A- Alt5XANK01B0T00Q ALTAIR 5X wireless with LEL METHANE O-100% LEL, O2 (0-30%),CO,H2S W/O Sampling Line & probe ATO Matrix :A- ALT5XCNK0100E00Q) Sampling Probe Straight Airline 1ft. For Altair 5X Sampling Line, Altair 5 10ft. 30

33 Portable Instruments Protection for Man & Environment ALTAIR 4X Multigas Detector with MSA XCell Sensor Technology MSA s ALTAIR 4X Multigas Detector with new MSA XCell Sensor Technology offers many performance advantages: faster response time, four-year sensor life, increased stability, and less than 60-second calibration time. The ALTAIR 4X Multigas Detector operates with only MSA XCell Sensors for LEL, O2, two-toxic H2S/CO, or individual H2S and CO sensors. The ALTAIR 4X Multigas Detector is compatible with the ALTAIR 4 QuickCheck Station and the ALTAIR 4 Galaxy Test Stand (Galaxy System software upgrade is required), and provides exclusive optional MotionAlert and InstantAlert features. Built on Durability Full three-year warranty Rugged housing Withstands 20-foot drop Easy to operate Agency certified IP67 rating Powered by Performance Four-year sensor life, 60% longer than the industry average MSA exclusive instrument end-of-sensor life warning 24-hour run time, 71% longer than the industry average Fast, high-performing sensors MSA exclusive MotionAlert & InstantAlert Features 50% less calibration gas used per minute than the industry average Revolutionizing Sensor Technology Sensor response and clear times under 15 seconds, 38% faster than the industry average Span calibration time of 60 seconds Typical cost savings of over 50% on calibration gas, replacement sensors and maintenance Greater signal stability and repeatability under changing or extreme environmental conditions Two-tox CO/H2S sensor with virtually no cross-channel interference The digital output of the sensors makes them much less susceptible to RF interference ALTAIR 4X with LEL(0-100%), O2(0-30%), CO(0-1999ppm) and H2S(0-200ppm) ALTAIR 4X with LEL(0-100%) and O2(0-30%) ALTAIR 4X with CO(0-1999ppm) and O2(0-25%) ALTAIR 4X with LEL (0-100%) Universal Pump Probe (ATEX for Altair 4X) 31

34 Portable Instruments Photoionization Detectors Sirius Multigas Detector The Sirius Multigas Detector provides users outstanding multifunctional capabilities by integrating a high performance photoionization (PID) detector into a 4-gas detector. Users are able to simultaneously monitor for volatile organic compounds while measuring for combustible, toxic and oxygen-deficient atmospheres within one reliable, easy-to-use unit. Features include: MSA's innovative PID design (patent pending) provides users with superior PID per formance including humidity resistance, stable zero readings and fast response times. Interchangeable rechargeable and disposable battery options can keep the instru ment running practically 24 hours a day, 7 days-a-week. A-SIRIUS-A0100A T0Q A-SIRIUS-AL100A T0Q A-SIRIUS-AL111A T0Q SIRIUS PID with O2 Sensor SIRIUS PID with LEL and O2 Sensor SIRIUS PID with LEL, O2, CO and H2S Sensor Single Gas Instruments ALTAIR Pro Single-Gas Detector Innovative ALTAIR Pro toxic gas and oxygen detectors with replaceable sensor and battery display gas concentration or percent oxygen on a large, clear, backlit LCD. The ALTAIR Pro Single-Gas Detector provides worry-free performance and stands up to the roughest handling in even the toughest industrial environments. Its rubberized armor housing and one-button operation provide the durability and simplicity you expect from MSA. Features include: Ease-of-use (1-button operation). Distinctive alarm system. Alarm check, bump check, fresh air zero, and calibration made easy. Easily replaceable, commercially available battery. Replaceable sensors. Built-in IR communication (event & data-logging). Rugged design. Water- and dust-resistant Altair Pro CO Altair Pro H2S Altair O Altair Pro Chlorine Altair Pro Ammonia Altair Pro SO2 32

35 Portable Instruments ALTAIR Pro Remote Oxygen Detector (O 2 -R) The remote oxygen version for the ALTAIR Pro Single-Gas Detector is a unique design in the safety industry. This O2 sensor is attached remotely at the end of a ten-foot cable, rather than inside the instrument s casing. This design allows the user to lower the sensor into a remote location and monitor the O2 level from ten feet away Altair Pro O2 (Remote) ALTAIR Single-Gas Detector The ALTAIR Single-Gas Detector featuring sensor options for carbon monoxide, hydrogen sulfide and oxygen will operate for over two years. This long lifespan, coupled with the unit s high performance, results in one of the most cost-effective monitors on the market. Advanced design offers superior dust and water protection and high resistance to RFI. The triple-alarm system featuring two bright LEDs, a piercing audible alarm, and a vibrating alarm ensures that no alarm condition goes unnoticed. Features include: Factory-calibrated detector with warranted two-year service life (1080 alarm minutes) Maintenance-free; no sensor or battery changes necessary Bump check confirmed with checkmark on instrument LCD, displayed for 24 hours Event recorder stores 25 latest events automatically in instrument memory Built-in IR communications enables interface FiveStar Link Software Built-in gas delivery adapter for gas response tests (No cal cap to lose) Rated to IP67 for dust and water ingress ALTAIR Single Gas H 2 S ALTAIR Single Gas CO ALTAIR Single Gas O 2 33

36 Portable Instruments Portable Instruments Replacement Parts & Accessories ALTAIR 4X Multigas Detector Parts List SS Suspender Clip Universal Pump Probe (ATEX) Calibration assembly (cap, tube, connector) European Power Supply MSA Link Software CD-ROM JetEye IR adapter with USB connector XCell Ex Combustible sensor XCell O 2 sensor XCell CO/H 2 S duo-tox sensor Front Housing with integrated dust filters(charcoal) Front Housing with integrated dust filters (Phosphorescent) L Quad gas Mix Cl, 45 % CH 4, 15% O 2, 60 ppm CO, 20 ppm H 2 S LCD frame assembly (frame, LCD, zebra strips, screws) Main board with battery pack Charger, 5 units, ALTAIR 4X, EN Plug Charger, 10 units, ALTAIR 4X, EN Plug ALTAIR Pro Single-Gas Detector Parts List Clip, Suspender Style, black Sensor, CO Sensor, H 2 S Sensor, O 2 (Oxygen) Sensor, HCN (Hydrogen Cyanide) Sensor, Cl 2 (Chlorine) Sensor, SO 2 (Sulfur Dioxide) Sensor, NO 2 (Nitrogen Dioxide) Sensor, NH 3 (Ammonia) Sensor, O 2 - Remote Version Sensor, ClO 2 (Chlorine Dioxide) Sensor Gasket Horn Gasket Battery - CR Screws, Case Calibration Accessories Regulators & Tubes Fixed Flow Regulator, 0.25 LPM, Model RP Demand Regulator Tubing, 40 cm (16") (not used for NH3, Cl2 or ClO2) Tubing, 40 cm (16"), Tygon (NH3, Cl2, ClO2 only) 34

37 Fixed Gas and Flame Detection Complete Safety Solutions Monitoring of hazardous gases and vapours in plants and large areas is necessary in all branches of industry. Directives and regulations covering the protection of plant and personnel as well as the monitoring of immissions require suitable gas detection equipment. In addition to portable instruments for personnel monitoring, permanently installed detection systems (detectors and controllers) are used for continuous monitoring. MSA is one of the few suppliers of permanent gas detection technology that develops and manufactures a complete range of sensors, controllers and monitors and integrates them into system solutions. This is the way to develop optimum systems that can meet all customer requirements at an excellent performance-price ratio - an unbeatable case for safety and flexibility. Whether stand-alone, or integrated into existing control and monitoring systems, MSA offers made-to-measure solutions. MSA's portfolio on Permanent Gas and Flame Detection Systems includes: Controllers Detectors Sensors Monitors Fire and Gas Detection Systems Alongside the extensive range of the products mentioned above, MSA also provides a high level of customised service including: project planning and development, installation support and commissioning, maintenance and system modification. 35

38 State-of-the-Art Detection Technology Fixed Gas and Flame Detection 47K Series Cost effective passive catalytic sensors to detect potentially hazardous concentrations of flammable gas and vapour in air up to 100% LEL. Available as Standard (ST), Poison Resistant (PRP), High Temperature (HT) versions with a complete range of accessories and junction boxes to meet virtually all industrial applications. Series 47K sensors used in combination with MSA Controllers fully meet the requirements of ATEX Directive 94/9/EC, including performance approval, and being SIL 2 capable they can be used as part of a safety related system. For more information, please see leaflet ATEX II 2G Ex d IIC T3/T4/T6, II 2D Ex td A21 IP6X T85 C/T135 C/T200 C including performance approval, SIL 2 Prima XI The PrimaX I gas transmitter detects a wide range of toxic gases and oxygen using an electrochemical sensor technology. Innovative enclosure design, ease of use, fast installation and being suitable for both indoor and outdoor installations make the PrimaX I transmitter your choice for versatile gas detection. The large display with clear plain text provides information at a glance. Calibration is easily performed using the built-in keypad or via HART digital protocol. The plug-in replacement sensors and an integral backplate enable fast and easy installation. PrimaX I comes as general purpose or intrinsically safe design in a robust anti-static, reinforced nylon housing with standard 4 20 ma output and optional HART capability. SIL 2 compliance is approved by TUV. For more information, please see leaflet ATEX II 1G Ex ia IIC T4 Ga, II 2D Ex ia IIIC T130 C Db IP54, SIL 2 Prima XP The PrimaX P gas transmitter is suited to a wide range of indoor and outdoor applications for the detection of combustible gases (catalytic combustion sensor), toxic gases or oxygen (electrochemical sensors). The PrimaX P features an innovative custom designed enclosure with integral 4-way keypad for ease of use. The large LCD with clear plain text provides information at a glance and the additional LEDs give a clear status indication. The plug-in replacement sensors and an integral backplate enable fast and easy installation. PrimaX P comes as flameproof design in a coated aluminium enclosure with standard 4 20 ma output and optional HART and relays capability. SIL 2 compliance is approved by TUV. For more information, please see leaflet ATEX II 2G Ex d ia [ia] IIC T4 Ga, II 2D Ex tb ia [ia] IIIC T130 C Db IP67, SIL 2 Prima XIR The PrimaX IR offers hydrocarbon detection in LEL range using infrared absorption technology through the patent-pending PrimaX IR dual source design. A redundant IR source provides reliability and uninterrupted monitoring should a source failure occur. The 316 stainless steel, IP67-rated, rugged housing protects the PrimaX IR from environmental extremes. Standard 4 20 ma output with HART capability offers user-friendly set-up, calibration diagnostics, and maintenance. A unique environmental guard with patent-pending clamshell design provides convenient installation in tight locations. For more information, please see leaflet ATEX II 2G Ex d IIC T4 Gb, II 2D Ex tb IIIC T130 C Db IP67, SIL 2 36

39 Fixed Gas and Flame Detection ULTIMA MOS-5 and ULTIMA MOS-5E ULTIMA MOS-5 and MOS-5E detect ppm levels of hydrogen sulphide (H2S), providing status indication and alarm outputs. Their performance is based on their metal oxide semiconductor sensor with unique technical parameters. High tolerance for a broad range of temperatures, humidity levels, as well as short-term high H2S concentrations and very low cross sensitivity to common gases make these detectors ideal for installation in harsh environments. The ULTIMA MOS-5 provides analogue 4 20 ma and 3 relay outputs in a stainless steel housing. The ULTIMA MOS-5E incorporates analogue 4 20 ma and three open collector outputs in an aluminum housing. HART and Modbus communication enable complete status and control capability in the control room. For more information, please see leaflets and ATEX II 2GD EEx d IIB+H2 T5, SIL 2 and SIL 3, IP66, HART registered (ULTIMA MOS-5) ATEX II 2G EEx d e m IIC T4, SIL 3, IP66/67 (ULTIMA MOS- 5E) ULTIMA XL/XT Series The cost-effective fixed installation gas monitors ULTIMA XL and XT with HART field communications protocol use well proven catalytic, electrochemical and infrared technologies for detection of combustible and toxic gases and for oxygen deficiency. The interchangeable smart sensors can be changed under power without declassifying a hazardous area. With the non-display ULTIMA XL/XT gas monitors the user has multiple calibration options: the handheld HART communicator, a controller or laptop which communicates via a dedicated HART Software and local internal LEDs and push-buttons. ULTIMA XL is explosion-proof with a stainless steel enclosure, while ULTIMA XT uses a general purpose, water and corrosion resistant polycarbonate housing. For more information, please see leaflet ATEX II 2 (2) G Ex d (ib) IIC T6, II 3 (2) G Ex na (ib) IIC T6, IP66 (ULTIMA XL) ULTIMA X Series The ULTIMA XE and XIR provide continuous monitoring of combustible and toxic gases and oxygen deficiency using catalytic, electrochemical and infrared sensor technologies. They are suitable for almost all applications in virtually any type of industry. A large easy to read LCD shows the gas reading and gas type as well as clear text status messages. The ULTIMA X series is powered from 24 VDC with a 4 20 ma output signal and optional on board status LED s and/or output relays. Smart sensor technology allows sensor disconnect and replacement under power in hazardous locations. ULTIMA XE gas monitors are also available with HART field communications protocol. The ULTIMA XA comes in a rugged plastic general purpose enclosure. It is available with 4 20 ma analogue output or with optional HART protocol. For more information, please see leaflets and ATEX II 2G EEx d IIC T4, including performance approval, SIL 2 (ULTIMA XE) ATEX II 2G EEx d IIC T5/T6, including performance approval 37

40 Fixed Gas and Flame Detection FlameGard 5 Series Designed with advanced ultraviolet (UV) and infrared (IR) sensing technology, the FlameGard 5 Series represents the state-of-the-art in secure flame monitoring. The FlameGard 5 MSIR, a multi-spectral infrared detector designed to detect hydrocarbon fires, features breakthrough Neural Network Technology (NNT) for reliable discrimination between actual flames and nuisance false alarm sources within a distance of up to 70 m. FlameGard 5 UV/IR is designed to detect hydrocarbon fires within 15 m, FlameGard 5 UV/IR-H2 is optimized to detect hydrogen based flames, and FlameGard 5 UV/IR-E with stainless steel housing and Ex e wiring compartment enables high level of resistance in harsh environments. The FlameGard 5 Series flame detectors provide standard 4 20 ma output with optional relays or HART and Modbus digital communication. Suitable for a wide range of applications in the production, transport and processing. For more information, please see leaflets , , and ATEX II 2G Ex d IIC T5 Gb, II 2D Ex tb IIIC T100 C Db, SIL 3, HART registered (MSIR, UV/IR) ATEX II 2G Ex d e IIC T4/T5 Gb, II 2D Ex tb IIIC T135 C /100 C Db, IP6X (UV/IR-E) ULTIMA OPIR-5 The ULTIMA OPIR-5 open path hydrocarbon gas transmitter provides continuous monitoring of methane and propane gas concentrations based on advanced infrared sensor technology features. The dual detection range enables sensitivity to both small (ppm m) and large (LEL m) gas leaks. The ULTIMA OPIR-5 includes continuous self-check monitoring for fail to safe operation. Automatic gain control compensates for dirty optics, rain, and fog. The result is precision accuracy with exceptional reliability in harsh environments and improved false alarm rejection with an optical path length of up to 150 m. Standard analogue output 4 20 ma with HART capability, relays and RS485 Modbus allow to connect ULTIMA OPIR-5 to standard industrial controllers. For more information, please see leaflet ATEX II 2G D Ex d IIB+H2 T4 Gb, II 2D Ex tb IIIC T135 C Db IP66/67 UltraSonic IS-5 and UltraSonic EX-5 The UltraSonic IS-5 and EX-5 are non-concentration based gas detectors used to detect leaks from high-pressure systems with a maximum coverage radius of 20 meters. They respond to the airborne ultrasound generated from gas releases in open ventilated areas, where traditional methods of detection may be difficult. The intrinsically safe UltraSonic IS-5 is suited for installations restricted to low power (< 1 W). The explosion-proof UltraSonic EX-5 features the Senssonic patented self-test for full failsafe operation and a three digit LED display showing actual ultrasonic level value (in db) and alarm indication. Standard 4 20 ma output with HART capability and output relays can control additional action in case of alarm or fault condition. For more information, please see leaflets and ATEX II 2G EEx ia IIC T4, SIL 1 and SIL 2 (UltraSonic IS-5) ATEX II 2G EEx d e ib IIB+H2 T6, SIL 2 and SIL 3 (UltraSonic EX-5) 38

41 Fixed Gas and Flame Detection Controllers 9010/9020 LCD and LCD The control system 9010/9020 LCD provides maximum flexibility, simple operation, high reliability and superb performance at considerably reduced costs. In combination with the large range of MSA gas sensors, the 9010/9020 LCD excels in a variety of industrial applications, there could be a presence of dangerous gas concentrations. The 9010 LCD control module processes signals from one gas sensor while the 9020 LCD processes signals from two independent gas sensors. The system is also available as a single or dual channel wall mount and in ABS hous ings or as 19 rack version with up to 5 or 10 modules. The LCD is identical to the 9020 but is configured as a four-channel IP65 controller to suit marine and industrial applications. For more information, please see leaflets and ATEX II (1)G (2)G, MED 96/98/EC GasGard XL The GasGard XL is a multi-channel wall mount controller for monitoring toxic, oxygen and flammable gases in industrial plants. It can be easily configured to accept up to eight remote gas sensors, depending on the number of individual plug-in input cards installed. The large, easy-to-read, multi-language LCD graphic display allocates real time information on target gas levels and events, allowing full system diagnosis, supported by individual LEDs per channel, relays and internal buzzer. For more information, please see leaflet ATEX II (1)G (2)G, SIL 2, MED 96/98/EC SUPREMATouch SUPREMATouch is a gas and fire warning system for large area measuring and monitoring in industries and small or medium size plants. It can be used with a wide range of detectors including flammable and toxic gas, oxygen, smoke, fire and heat and manual call points. The SUPREMATouch includes a large colour touchscreen display for easier and userfriendly operation, enhanced processing power and addressable fire and detector capability. Latest hardware and software technology permits simple planning, installation, configuration, integration and operation. The compact, modular design of the SUPREMATouch allows it to be economically tailored for each application and be extended and adapted any time to meet changing sensor and alarm requirements. Designed around standard industrial 19 racks, SUPREMATouch provides signal processing for up to 256 inputs and 512 outputs and the ability to distribute the system over up to 8 racks using satellites to minimise installation cost. For more information, please see leaflet ATEX II (1)G (2)G, SIL 3, MED 96/98/EC 39

42 Fixed Gas and Flame Detection Monitors CHILLGARD RT The CHILLGARD RT is a single or multipoint gas warning system suitable for all industrial refrigeration systems or chillers be it production or research operations, food cold storage or meat packing operations. It allows precise monitoring of the smallest refrigerant concentrations and detection of leak locations. The instrument works for months with very little deviation from the zero point. Due to its excellent detector stability, unlike other products, the zero point adjustment can be reduced to once a year. The CHILLGARD RT generates the signals required to initiate audible and visible alarms. For more information, please see leaflet CHILLGARD M-100 The CHILLGARD M-100 refrigerant sensor is designed to detect the presence of the most common halogenated refrigerants in cold storage facilities, mechanical equipment rooms and other refrigerant applications. This compact sensor can be mounted almost anywhere to detect potential leaks of halogenated refrigerants. Easy installation ensures fast and practical integration into existing automated systems. For more information, please see leaflet CHEMGARD The CHEMGARD gas monitor can monitor more than 60 gases in the TLV range, such as hydrocarbons, solvents, alcohols, alkanes and toxics. The photoacoustic infrared sensing technology provides precise, low cost and high performance monitoring. It is extremely stable and highly selective to the gas of interest and can operate for months with virtually no zero drift. An optional multi point sequencer can be included in the CHEMGARD to allow either 4 or 8 points to be sampled. The monitor provides 3 freely adjustable alarm levels and relay outputs for each alarm level. For more information, please see leaflet

43 MSA - The Safety Company My Notes 41

44 Worldwide Locations MSA - The Safety Company With MSA s worldwide presence we deliver the right safety solution to the right place, at the right time, supported by highly skilled personnel at local MSA offices. Nearly 5,000 MSA staff are at work throughout the world to ensure that you always get the best safety solution. We are always ready to assist you in choosing the right option and to help you purchase the right equipment. Whatever information and advice you require on our products and services, we are always there for you. Simply contact MSA India for assistance. India Offices MSA (INDIA) Limited Ecostation Level-16 (Floor) Plot No.7, Block BP, Salt Lake, Sector V, Kolkata I Phone : to 64 Fax : india@msasafety.com Central Logistics Hub Mumbai 2nd Floor, KMK House, Plot No. - 52, Panvel Industrial Co-Operative Estate Ltd Panvel, Navi Mumbai Maharashtra, India Office Phone : / 2 in.logistics@msasafety.com Sales.Mumbai@msasafety.com Northern Region Home office - Delhi / Lucknow Krishan Srivastava Phone : / Krishan.Srivastava@msasafety.com Sales.Delhi@msasafety.com Sales.Lucknow@msasafety.com Central Region Home Office - Indore Piyush Bose Phone: Piyush.Bose@msasafety.com Sales.Indore@msasafety.com Western Region Home Office - Vadodra Chintan L. Bhatt Phone: Chintan.Bhatt@msasafety.com Sales.Vadodra@msasafety.com Southern Region - Hyderabad/ Bangalore Ashok Gopu Phone: Ashok.Gopu@msasafety.com Sales.Hyderabad@msasafety.com Sales.Bangalore@msasafety.com Southern Region - Chennai 1st Floor, Alsa Tower Plot # , Kilpauk Poonamallee High Road Chennai Phone: Fax: KP.Hariprashad@msasafety.com Sales.Chennai@msasafety.com For Sales enquiry : in.sales@msasafety.com For Service Enquiry: in.service@msasafety.com 42