Monthly Notifications Register

Transcription

1 Information procedure Page 1 Monthly Notifications Register Notifications registered at CMC from to Register issued on :

2 List of non-electrotechnical subsectors Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329 A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320 A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180 A11 Security Services / CEN/BT/TF 167 A12 Consultancy Services / 395, 381 A99 Undetermined / CEN/WS 002; CEN/WS 004

3 Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; ; 167; 250; 277; 284; 288; 297; 340; 349 B03 Concrete ; CEN/WS 003 B04 Cement 74; B05 Fire tests B06 Gypsum / 241 B07 Glass B08 Doors and windows B09 Thermal matters ; 89 B10 Timber structures B11 Metal structures CEN/BT WG 173 B12 Masonry 179; ; 246 B13 Solar energy B14 Geotechnics B15 Sanitary appliances / 163 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254 B28 Floor coverings 38/SC B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323

4 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229 B33 Building design ; 325 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined /

5 Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products ; 275; 302; 307; 327; 338; CEN/WS 008 C02 Paints and related products ; 298 C03 Chemistry C04 Laboratory glassware C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants C10 Starch 93 / C11 Tobacco 126 / C12 Glass plant / / C13 Fertilizers ; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 / C20 Explosives and firework / 212; 321 C21 Cosmetics C99 Undetermined / /

6 Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; ; 171; 176; 237; F06 Terminology principles 37 / 294; 318 F07 Documentation and information ; CEN WS 010 F08 Surfaces F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems ; 225; 251; 278; CEN/WS EBES F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general ; CEN/WS 007 F16 Graphical symbols 145 / F17 Administrative documents 154 / F18 Micrographics 171 / F19 Optics 172; ; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC CWG/QS F21 Value analysis and project / 279 network F22 Logistics / / F23 Energy 203 / F99 Undetermined / /

7 Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 / H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating ; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture H10 Sewing machines 148 / H11 Heater controls H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 / H14 Caravans H15 Toys H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / / H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106 H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 H99 Undetermined / 299

8 Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners I03 Limits & fits 3 / I04 Rolling bearings 4 / I05 Iron pipes I06 Pressure vessels I07 Shafts 14 / I08 Agricultural machines , 334 I09 Small tools 29 / I10 Splines / / I11 Machine tools ; 143; 145; 255 I12 Pulleys & belts I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry I16 Internal combustion engines 70; I17 Machinery in general 72; ; 153; 214; (including safety) 271, 337 I18 Mining I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps I24 Industrial fans 117 / I25 Compressors I26 Plain bearings 123 / I27 Earth moving and construction 127; equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; ; 236 I32 Flanges / 74 I33 Information processing in automation

9 I34 Non-ferrous metallic pipes / / I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / / I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies / 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2

10 Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 M02 Zinc / 209 M03 Foundry technology, ; ECISS/TC 31 including cast iron M04 Copper M05 Welding M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys M09 Iron ores 102 / M10 Metallic coatings M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion ; 219 M16 Mechanical tests for metals 164 ECISS/TC 1; ECISS/TC 2 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

11 Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board N02 Solid fuels N03 Petroleum products 28 19; 336; 343 N04 Refractories N05 Textiles ; 248 N06 Rubber ; CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics N10 Cork 87 / N11 Wood-based panels N12 Timber products 99 / N13 Leather N14 Plastics pipes N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics N21 Gaseous fuels and combustible gas 158; N22 Feather and related materials / 222 N99 Undetermined / /

12 Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound ; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162 S05 Dentistry S06 Vibration & shock S07 Anaesthetic and respiratory equipment S08 Air quality ; 243; 264; CEN/CLC WG/CMI S09 Water quality and water supply ; 230; CEN/WS 001 S10 Surgical implants ; CEN/CLC JWG/AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled S17 Respiratory protective devices / 79 S18 Sterilization of equipment ; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and transportation S21 Laboratory medicine, clinical ; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3 S22 Energy saving / CEN/WS 005 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 / S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 / S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 S99 Undetermined / 205; CEN/BT/TF 127

13 Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; ; 300 structures T02 Aerospace ; AECMA; ECSS T03 Road vehicles ; 326 T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers ; 221; 265; 266; 268; 296 T07 Glass containers 63 / T08 Cranes T09 Materials handling and ; 149 storage equipment T10 Freight containers ; 280 T11 Steel wire ropes 105 / T12 Industrial trucks T13 Lifting chains, hooks and ropes T14 Packaging T15 Cycles T16 Lifts & escalators ; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / /

14 Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CENELEC - ETSI Z03 Common O.S.I. activities / CEN/CENELEC - EWOS Z99 Undetermined / CEN/CENELEC CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/TC 353

15 Information procedure Page 2 Monthly Notifications Register Notifications registered at CMC from to Sector A : SERVICES Register issued on :

16 Subsector A01: TOURIST SERVICES Page 3 Subsector : A01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Time-sharing tourism services. Service provisio requirements. This standard specifies the quality requirements of time-sharing tourism services with regard the final service offered, the service delivering process, as well as their equipments and installations. Subsector : A01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Adventure Tourism This standard establishes requirements for the internal management and service requirements for adventure tourism companies. Subsector : A01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Night leisure. Service provision requirements for leisure businesses This standard establishes the requirements for companies that offer night leisure activities. Subsector : A01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Medical spas. Service provision requirements. This standard specifies the quality requirements of health spas with regard the final service offered, the service delivering process, as well as their equipments and installations. REV/AMD UNE :2007

17 Page 4 Subsector : A01 Registration Date : AENOR Spain Project ID : P /0001 Project Established National Ref : PNE Beaches. Service provision requirements. This standard specifies the service provision requirements in beaches. REV/AMD UNE :2008 Subsector A99: UNDETERMINED. Subsector : A99 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Quality criteria for training firms A trainging form is firm belonging to a system, to train skilled employees. It collaborates with other training firms in a network and resigns from dealing with real money, i.e. the exchange of goods, services and money is virtual and without real risk. For allmost every sector there are training forms, e.g. IT-services and catering services. Trainging firms and their employees buy and sell goods and/or services on avirtual level. Usually a traing firms is divided into differt departments, e.g. marketing, financing and sale. In Austria training firms are used to prepare or to train the access to employmentship, occupational come-back and change among other things. They are operated by schools and by organisations for adult vocational training. Subsector : A99 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM ISO Guidance on social responsibility This International Standard provides guidance to all types of organizations, regardless of their size or location, on: concepts, terms and definitions related to social responsibility; the background, trends and characteristics of social responsibility; principles and practices relating to social responsibility; core subjects relating to social responsibility; issues of social responsibility (issues); integrating, implementing and promoting socially responsible behaviour throughout the organization and through its policies and practices related to its sphere of influence; identifying and engaging with stakeholders; and communicating commitments and performance related to social responsibility. By providing this guidance, this International Standard is intended to assist organizations in contributing to sustainable

18 Page 5 development. This International Standard encourages an organization to undertake activities that go beyond legal compliance, recognizing that compliance with law is a fundamental duty of any organization and an essential part of its social responsibility. Subsector : A99 (Secondary Subsector) Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 8904 Guide to the sustainable development of communities Subsector : A99 Registration Date : NEN Netherlands Project ID : /0001 Project Established National Ref : NPR 6070:2009 Concept nl Managing sustainable employability This code of practice gives guidelines for managing sustainable employability in continuously changing organizations. The question is how the government, businesses and companies find solutions for durable employability. Subsector : A99 Registration Date : NEN Netherlands Project ID : /0001 Project Established National Ref : NTA :2009 Concept en System Interface AMI Systems - Part 2: API Usage per use case AMI refers to systems that measure, collect and analyze energy usage, from advanced devices such as electricity meters, gas meters, and/or water meters, through various communication media on request or on a pre-defined schedule. This infrastructure includes hardware, software, communications, customer associated systems and meter data management (MDM) software. ** End of Sector **

19 Information procedure Page 6 Monthly Notifications Register Notifications registered at CMC from to Sector B : BUILDING AND CONSTRUCTION Register issued on :

20 Subsector B01: FIRE PROTECTION. Page 7 Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Structural fire protection in industrial buildings - Determination of the equivalent time of fire exposure Subsector B02: STRUCTURES. Subsector : B02 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Bbl 1 Design of bridge bearings - Example of calculation In this document on the basis of ONR a practical example for the designing of values for loads on bridge bearings is shown. Subsector : B02 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : prlvs EN :2004/NA Eurocode 1: Actions on structures Part 2: Traffic loads on bridges - National Annex The standard specifies national parameters to LVS EN and shall be applied jointly with LVS EN in Latvia REV/AMD LVS EN (2004) Subsector : B02 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : prlvs EN :2008/NA Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules - National Annex The standard specifies national parameters to LVS EN and shall be applied jointly with LVS EN in Latvia

21 Page 8 REV/AMD LVS EN (2008) Subsector : B02 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : prlvs EN :2008/NA Eurocode 3 - Design of steel structures - Part 2: Steel Bridges - National Annex The standard specifies national parameters to LVS EN and shall be applied jointly with LVS EN in Latvia REV/AMD LVS EN (2008) Subsector : B02 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : prlvs EN :2008/NA Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rules and rules for bridges - National Annex The standard specifies national parameters to LVS EN and shall be applied jointly with LVS EN in Latvia REV/AMD LVS EN (2008) Subsector : B02 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : prlvs EN :2009/NA Eurocode 5 - Design of timber structures - Part 2: Bridges - National Annex The standard specifies national parameters to LVS EN and shall be applied jointly with LVS EN in Latvia REV/AMD LVS EN (2009) Subsector : B02 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : prlvs EN :2006/NA Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges - National Annex

22 Page 9 The standard specifies national parameters to LVS EN and shall be applied jointly with LVS EN in Latvia REV/AMD LVS EN (2006) Subsector : B02 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : prlvs EN :2006/NA Eurocode - Basis of structural design - National Annex The standard specifies national parameters to LVS EN 1990 and shall be applied jointly with LVS EN 1990 in Latvia REV/AMD LVS EN 1990 (2006) Subsector : B02 Registration Date : NBN Draft Issue Date : Belgium Latest Date for Comments : Project ID : BE610616/0001 Draft for public enquiry , , National Ref : prnbn EN ANB Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design - National annex REV/AMD NBN EN European : Not Equivalent to EN :2005 Subsector : B02 (Secondary Subsector) Registration Date : NBN Draft Issue Date : Belgium Latest Date for Comments : Project ID : BE610616/0001 Draft for public enquiry , , National Ref : prnbn EN ANB Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design - National annex REV/AMD NBN EN European : Not Equivalent to EN :2005 Subsector B06: GYPSUM. Subsector : B06 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR 23415

23 Gypsum dry screeds Page 10 The present ON-Regel (ON Rule) applies to plannign and design of gypsum plasterboard dry screed systems from processing according to ÖNORM EN and gypsum fibre boards according to ÖNORM EN Dry screeds in the sense of this ON-Regel are positively connected panel-like elements on gypsum basis which are executed as screed on separating layers or on insulating layers. This rule does not apply to timber board or similar materials. Subsector B09: THERMAL MATTERS. Subsector : B09 (Secondary Subsector) Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 5422:2009 Corrigendum 1 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 degrees C to +700 degrees C. Corrigendum Subsector : B09 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : Project ID : CH090034/0001 Draft for public enquiry National Ref : SIA 279 Thermal insulating materials and masonry products - General requirements and thermal design values REV/AMD SIA 279 (2004) Subsector B10: TIMBER STRUCTURES. Subsector : B10 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM B 4119 Planing and execution of under-roof constructions and under-roof sheets The present Austrian Standard applies to planning and design of under-roof constructions and under-roof sheets enabling the ventilation of the roof membrane.

24 Page 11 Subsector B11: METAL STRUCTURES. Subsector : B11 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : NA to BS EN :2007+A1 UK National Annex to Eurocode 9. Design of aluminium structures. Part 1-1. General structural rules. Amendment Subsector B15: SANITARY APPLIANCES. Subsector : B15 Registration Date : SIS Draft Issue Date : Sweden Latest Date for Comments : Project ID : /0001 Draft for public enquiry National Ref : Sanitary appliances - Prefabricated installation modules for wall hung WC pans Prefabricated installation modules for wall hung WC pans are increasing in Sweden. To specify it needs requirements and test methods for design and installations. A standard is important for connections to Swedish installation and building technology. Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY. Subsector : B17 Registration Date : SIST Draft Issue Date : Slovenia Latest Date for Comments : Project ID : /0001 Draft for public enquiry , National Ref : osist 1050:2009 Dimensional requirements form plugs and sockets for domestic and similar use Subsector B18: SCAFFOLDING.

25 Page 12 Subsector : B18 Registration Date : AENOR Spain Project ID : P /0001 Project Established National Ref : PNE Load and unload platforms for construction sites. Product specifications and test methods This Standard defines platforms, temporally fixed, used in the construction sites to load and unload materials. Subsector B20: DRAINAGE EQUIPMENT. Subsector : B20 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : Project ID : CH090035/0001 Draft for public enquiry National Ref : SN Road drainage; Safety measures to protect waters from water polluting liquids in case of averages Subsector B27: WATERPROOFING MATERIALS. Subsector : B27 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Synthetic materials. Application. Lining systems for water reservoirs used for irrigation purposes or water storage with waterproofing geomembranes made out of polyethylene (PE) It defines the requirements for the installation and maintenance of the waterproofing systems for irrigation purposes of storage of water with water proofing membranes of polyethylene REV/AMD UNE :1995 Subsector B29: AGGREGATES.

26 Page 13 Subsector : B29 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM B 3130 Aggregates for bituminous mixtures and surface dressings for roads, airfields and other trafficked areas - Rules for the implementation of ÖNORM EN This Austrian Standard specifies the following selected requirements for aggregates for bituminous mixtures and surface dressings for roads, airfields and other trafficked areas complying with ÖNORM EN 13043, based on the specific geographic, topographic and climatic conditions in Austria. The present Austrian Standard shall be applied jointly with ÖNORM EN Note: Requirements for reclaimed asphalt for use in bituminous mixtures are defined in ÖNORM EN Subsector B30: FLOOR AND SURFACING. Subsector : B30 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS :2006 Corrigendum 1 Industrial type flooring and stair treads. Part 1. Metal open bar gratings. Specification. Corrigendum Subsector B99: UNDETERMINED. Subsector : B99 (Secondary Subsector) Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 6213:2000+A1 Selection of construction sealants. Guide. Amendment Subsector : B99 (Secondary Subsector) BSI United Kingdom Registration Date :

27 Project ID : /0001 Project Established National Ref : BS :2006 Corrigendum 1 Industrial type flooring and stair treads. Part 1. Metal open bar gratings. Specification. Corrigendum Page 14 Subsector : B99 Registration Date : NEN Netherlands Project ID : /0001 Project Established National Ref : NTA 4614:2009 Concept nl Covenant high-rise buildings This NTA gives requirements and recommendations in addition to the existing building standards and the Dutch law for buildings with a height larger than 70 m. This NTA deals with constructions, facades, fire safety, building installations and tranport installations. Subsector : B99 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE IN Building diagnosis - Part 8 - Pathological study of the structure of the building - Wood structures This Part establishes the guidelines for the diagnosis of the elements that constitute the wood structures ** End of Sector **

28 Information procedure Page 15 Monthly Notifications Register Notifications registered at CMC from to Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on :

29 Subsector C01: Food products Page 16 Subsector : C01 Registration Date : NSAI Draft Issue Date : Ireland Project ID : /0002 Draft for public enquiry National Ref : I.S. 351 Control of fats, oils and grease in food service establishments Standard provides guidance to food business operators on the control of fats, oils and grease in food operations. REV/AMD I.S. 351 Subsector : C01 Registration Date : SUTN Slovakia Project ID : /0001 Project Established , National Ref : STN Malt legislation, standards, new clasification of malt and reduction of malt quality classes will be changed and added in the revision. There will be eliminated the chapter on production instruction. REV/AMD STN Subsector : C01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Fresh vegetables. Controlled production. Artichoke It specifies requirements of a controlled production system of artichoke. REV/AMD UNE :2004 Subsector : C01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Fresh vegetables. Controlled production. Leek. It specifies requirements of a controlled production system of leek. REV/AMD UNE :2004

30 Subsector : C01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Fresh vegetables. Controlled production. Cauliflower. It specifies requirements of a controlled production system of cauliflower. REV/AMD UNE :2004 Page 17 Subsector : C01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Fresh vegetables. Controlled production. Raspberry This project describes the particular aspects of a controlled production system for raspberries. REV/AMD UNE :2004 Subsector : C01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry National Ref : PNE Fresh vegetables. Controlled production. Dessert grape. It specifies requirements of a controlled production system of dessert grape. REV/AMD UNE :2004 Subsector C13: FERTILIZERS. Subsector : C13 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 8556 Characterization of sludges. Specification for sludges used on farmland

31 Subsector C99: UNDETERMINED. Page 18 Subsector : C99 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Laboratory furniture - Fume cupboards - Part 3: Opposite-sided sash fume cupboards ** End of Sector **

32 Information procedure Page 19 Monthly Notifications Register Notifications registered at CMC from to Sector F : FUNDAMENTAL STANDARDS Register issued on :

33 Subsector F05: MEASURING INSTRUMENTS. Page 20 Subsector : F05 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 870:2008 Corrigendum 2 Specification for external micrometers. Corrigendum Subsector : F05 Registration Date : AENOR Spain Project ID : P /0001 Project Established National Ref : PNE Communication protocol to read water meter devices and other measurement or water control devices This standard define a communication protocol to download automatically all the information from different water meters, allowing compatibility between in-site acquisition data systems, and also usable for other kind of measuring instruments or water control devices Subsector F09: BANKING. Subsector : F09 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM A 6800 Method for the valuation of the intangible asset brand This Austrian Standard defines a method to valuate the intangible asset "brand" and is a revision of ONR 16800:2007. Subsector : F09 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM A 6801 Method for patent valuation This Austrain Standard defines a method to valuate a patent.

34 Page 21 Subsector : F09 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS XXXXX Financial services compliance Subsector F12: INFORMATION PROCESSING SYSTEMS. Subsector : F12 Registration Date : NEN Netherlands Project ID : /0001 Project Established National Ref : NEN 5313:2009 Concept nl Design, build and organize computer rooms and data centres This code of practice contains criteria, classifications, specifications, performance indicators, measurements and a general guideline for the design proces to be used by organizations and for projects. It's meant for orghanizations concerned with the specification and provision of assignments and the design, building and organization of computer rooms and data centers. Subsector F15: MATERIAL TESTING IN GENERAL. Subsector : F15 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Non-destructive testing - Thermographic testing - Part 2: Equipment Subsector F17: ADMINISTRATIVE DOCUMENTS. Subsector : F17 Registration Date :

35 Page 22 SUTN Slovakia Project ID : /0001 Project Established , National Ref : STN Rules for Tapewriting and Text Presentation The standard specifies individual rules of writing the characters, signs, abbreviations, marks, numbers and compilations; it further deals with the rules of effective and lucid creation of text, rules of formatting official, business and private letters in domestic communication as well as rules of formatting official and business letters written in foreign languages. Purpose of the standard is to provide easier and clear text legibility, to enable information processing in easier and more lucid way and to enable more rational work with documents. REV/AMD STN Subsector : F17 Registration Date : SUTN Slovakia Project ID : /0001 Project Established National Ref : STN Letters forms This standard defines the content and format of data preprint on single- or multiple-page official and business letters. Purpose of this norm is to simplify written communication of organizations. REV/AMD STN Subsector F20: QUALITY ASSURANCE. Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Risk Management for Organizations and Systems - Terms and basics - Implementation of ISO The ON Rule on risk management covers the risk management of organisations and systems. It describes how risks can be identified, analysed, assessed and treated. Risk management also comprises crisis management and business continuity management. The risk management system shows how risk management can be implemented and maintained effectively and improved continually. In this context, risk management may be embedded in the existing management system or established in a stand-alone risk management system. The present ON Rule defines the terms and describes the basics of risk management. This includes its application and interaction with other management instruments. Additionally, the objectives and principles of risk management are presented. The terms used below follow the model of ISO Guide 73:2008 "Risk Management, Vocabulary" (in preparation). The objectives and principles are in line with the new ISO/DIS "Risk Management, Principles and Guidelines on Implementation".

36 Page 23 Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Risk Management for Organizations and Systems - Risk Management - Implementation of ISO The present ONR describes the generally applicable elements of a risk management system. The risk management process forms part of it. The actual form of the individual elements of the risk management system and the risk management process depends on the size of the organisation, its risk exposure, the complexity of the processes and the developments in its environment. It is recommended to specify and document the elements of the risk management system and the risk management process in such a way that they can be proven and verified in an objective way. Thereby, it is possible to determine whether an organisation has an appropriate risk management system.the risk management system may be integrated into existing management systems or introduced and implemented as a separate system. Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Risk Management for Organizations and Systems - Part 1: Guidelines for embedding the risk management in the management system - Implementation of ISO The present ON Rule describes the embedding of risk management into a management system. The starting point is the fact that risk management is a task and responsibility of the top management and executives of an organisation. To reflect this fact, the risk management process as laid down in ONR has to be understood, expressed and applied as a management process in various areas of the organisation. For risk management to become effective in the organisation, the risk management process should not be performed in isolation but should interact with the core processes of the organisation. Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Risk Management for Organizations and Systems - Part 2: Guideline for methodologies

37 in risk assessment - Implementation of ISO The present ON Rule provides an overview of the methods of risk assessment, the procedure and their use. The methods can be divided into five groups: creativity techniques, scenario analyses, indicator analyses, functional analyses and statistical methods. Page 24 Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Risk Management for Organizations and Systems - Part 3: Guidelines for emergency, crisis and business continuity management - Implementation of ISO The present ON Rule describes emergency, crisis and business continuity management in an organisation. Emergency and crisis management enables an organisation to respond quickly and adequately to emergencies and crises.special attention is given to the tasks and functioning of the crisis management team, in particular to the assessment of the situation and crisis communication. Business continuity management concentrates on restoring the operational functions lost on account of an emergency or crisis as quickly as possible in order to ensure the performance efficiency und value creation of the organisation. Here, the focus is on procuring replacements. Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Risk Management for Organizations and Systems - Requirements for the qualification of the Risk Manager - Implementation of ISO The present ON Rule (ONR) describes the requirements for the qualification of risk managers. They can work as experts in all fields of risk management applications: in organisation-wide risk management (enterprise risk management); in sector-specific risk management (products, innovations, projects); in safety management (e.g. fire protection, occupational safety, environmental safety, security management; and in emergency, crisis and business continuity management. The risk manager may be an employee of the organisation or an external consultant and risk expert. Subsector : F20 Registration Date : DS Draft Issue Date : Denmark Latest Date for Comments : Project ID : 0M243304/0001 Draft for public enquiry

38 Page National Ref : Social responsibility management systems - Specification See Danish scope Subsector : F20 Registration Date : LST Lithuania Project ID : /0001 Project Established National Ref : Occupational health and safety management systems. Guidelines for the implementation of LST 1977:2008 (BS OHSAS 18002:2008) This Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed specifications for the design of a management system. Subsector : F20 Registration Date : AENOR Spain Project ID : P /0001 Project Established National Ref : PNE Guide for the assessment of management system standard for the sustained success of an organization according to UNE-EN ISO 9004:2009 This Standard based on UNE-EN ISO 9004:2009 specifies the guidelines for the assessment of quality management system and the establishment of plans for improvement REV/AMD UNE 66174:2003 Subsector F99: UNDETERMINED. Subsector : F99 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ONR Business Continuity and Corporate Security Management - Requirements for the qualification of the Business Continuity and Security Manager The ON-rule describes the requirements for the qualification of the Business Continuity and Security Manager.

39 Page 26 Subsector : F99 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM ISO Risk management - Principles and guidelines This International Standard provides principles and generic guidelines on risk management. This International Standard can be applied throughout the life of an organization, and to a wide range of activities, including strategies and decisions, operations, processes, functions, projects, products, services and assets. This International Standard can be applied to any type of risk, whatever its nature, whether having positive or negative consequences. It is intended that this International Standard be utilized to harmonize risk management processes in existing and future standards. ** End of Sector **

40 Information procedure Page 27 Monthly Notifications Register Notifications registered at CMC from to Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on :

41 Subsector H07: SPACE HEATING. Page 28 Subsector : H07 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS A1:2002 Copper indirect cylinders for domestic purposes. Part 1. Open vented copper cylinders. Requirements and test methods. Amendment Subsector H26: SEALING MATERIALS. Subsector : H26 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 6213:2000+A1 Selection of construction sealants. Guide. Amendment ** End of Sector **

42 Information procedure Page 29 Monthly Notifications Register Notifications registered at CMC from to Sector I : MECHANICAL ENGINEERING Register issued on :

43 Subsector I18: MINING. Page 30 Subsector : I18 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Mine plans - Deep mining - Part 6: Safekeeping of mining produced hollows Subsector : I18 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Mine plans - Deep mining - Part 7: Shaft plan Subsector : I18 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 1: Construction, commissioning and monitoring Subsector I99: UNDETERMINED. Subsector : I99 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 5422:2009 Corrigendum 1 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 degrees C to +700 degrees C. Corrigendum Subsector : I99 Registration Date :

44 NEN Netherlands Project ID : /0001 Project Established , National Ref : NEN 3207:2009 Concept en Insulated power cables and flexible cords - Systems for the designation of types of cables This standard provides two systems for composing designations for electric cables and flexible cords which contain an abbreviated description of their construction and the materials used in these cables and flexible cords. Furthermore, this standard contains examples and designations showing how these designations are composed. This standard applies to insulated electrical cables and flexible cords intended for use in power installations. The standard applies both to non-harmonised cables and flexible cords (Section II) and harmonised cables and flexible cords (Section III). Page 31 ** End of Sector **

45 Information procedure Page 32 Monthly Notifications Register Notifications registered at CMC from to Sector M : METALLIC MATERIALS Register issued on :

46 Subsector M99: UNDETERMINED. Page 33 Subsector : M99 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Permanently attached, elastomer sealed connectors made of metal for metallic pipes for use in drinking water system installation - General quality requirements and test ** End of Sector **

47 Information procedure Page 34 Monthly Notifications Register Notifications registered at CMC from to Sector N : NON-METALLIC MATERIALS Register issued on :

48 Subsector N05: TEXTILES. Page 35 Subsector : N05 Registration Date : ASRO Draft Issue Date : Romania Latest Date for Comments : Project ID : /0001 Project Established National Ref : SR 13544:2010 Clothing. Men s Body Measurements and Garment Sizes. This standard sets the body measurement of Romanian men adults, by typo-dimensional variants, specifying the standard sizing systems used in mass-clothing design and manufacture in terms of application and specificity. Subsector : N05 Registration Date : ASRO Draft Issue Date : Romania Latest Date for Comments : Project ID : /0001 Project Established National Ref : SR 13545:2010 Clothing. Women s Body Measurements and Garment Sizes. This standard sets the body measurement of Romanian women adults, by typo-dimensional variants, specifying the standard sizing systems used in mass-clothing design and manufacture in terms of application and specificity. Subsector N20: CERAMICS. Subsector : N20 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM ISO Fine Ceramics (advanced ceramics, advanced technical ceramics) - Silicon nitride materials for rolling bearing balls This International Standard specifies the requirements for preprocessed silicon nitride materials for rolling bearing balls. This International Standard provides a classification defining physical and mechanical properties of silicon nitride preprocessed bearing ball materials. The materials are classified in three categories by the specification of characteristics and microstructures. Methods for sample preparation and observation of microstructures are provided in Annex A. ** End of Sector **

49 Information procedure Page 36 Monthly Notifications Register Notifications registered at CMC from to Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on :

50 Subsector S01: ACOUSTICS AND SOUND INSULATION. Page 37 Subsector : S01 Registration Date : ASI Austria Project ID : /0001 Project Established National Ref : ÖNORM B Sound insulation and room acoustics in building construction - Part 6: Measuring methods to prove that the requirements in buidings have been fulfilled This Austrian Standard is used to demonstrate compliance with the soundproofing requirements by sample measurements. Also included are details on the selection of sampling the appropriate number of measurements and statements about the confidence levels of the individual measurements. Accordingly the data are also used to determine the acoustic quality of individual units. In addition, information for identifying causes of variation in quality by measurement techniques in planning or execution is included. Subsector : S01 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Sound immission maps Subsector S05: DENTISTRY. Subsector : S05 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Dentistry - Adhesives in dental Prosthetics - Part 1: Metals Subsector S09: WATER QUALITY AND WATER SUPPLY. Subsector : S09 Registration Date : NEN Netherlands Project ID : /0001 Project Established

51 Page 38 National Ref : NPR 8066:2009 Concept nl Water - Sampling of stagnant waste water This code of practice describes the sampling of still waste water. The sampling is in some cases indicated. For example when the investigation data are used for indicating the discharge situation or obtaining of indicative information for further investigation. Subsector S12: GAS ANALYSIS. Subsector : S12 Registration Date : DIN Germany Project ID : /0001 Project Established National Ref : Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods Subsector S24: SOIL QUALITY. Subsector : S24 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 8601 Specification for subsoils and recommendations for use Subsector S26: ENVIRONMENTAL MANAGEMENT Subsector : S26 Registration Date : BSI United Kingdom Project ID : /0001 Project Established National Ref : BS 8904 Guide to the sustainable development of communities