Monthly Notifications Register

Transcription

1 Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from to Register issued on A list of subsectors can be found at the end of this document.

2 Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from to Sector A SERVICES Register issued on

3 Subsector A11 SAFETY AND SECURITY Page 3 Subsector A11 Registration Date Organization TSE Country Turkey ID t /0001 ICS , National Ref Title Competent services for Medical devices Rules Scope This standard includes rules for operating, physical characteristics, managership, technical equipment, personnel specifications and certification of Competent services for Medical devices - Rules National Subsector A11 Registration Date Organization TSE Country Turkey ID t /0001 ICS , National Ref Title Private services Rules for medical devices Scope This standard includes rules for management, structural features, technical equipment, personnel specifications and certification of private services for medical devices. National Subsector A11 Registration Date Organization TSE Country Turkey ID t /0001 ICS , National Ref Title Competent services - Diagnostic and treatment devices for health purposes used in livestock and veterinary services - Rules Scope This standard includes rules for management, structural features, technical equipment, personnel specifications and certification of competent services for diagnostic and treatment devices for health purposes used in livestock and veterinary services. National Subsector A99 UNDETERMINED Subsector A99 Registration Date Organization UNI

4 Country Italy ID /0001 ICS National Ref UNI Title Non-regulated professions - Educator of graphic gesture - Knowledge, skill and competence requirements Scope This standard specifies the requirements for the Educator of graphic gesture, in terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF. Page 4 National Subsector A99 Registration Date Organization Country ID /0001 ICS National Ref Title Cash and value services - Part 1 Requirements National Subsector A99 Registration Date Organization Country ID /0001 ICS National Ref Title Cash and value services - Part 2 Certification procedure for the conformity assessment of cash and value services in accordance with National ** End of Sector **

5 Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from to Sector B BUILG AND CONSTRUCTION Register issued on

6 Subsector B01 FIRE PROTECTION Page 6 Subsector B01 Registration Date Organization Country ID /0001 ICS National Ref Title Warnings - Audible warning and information signals for smoke detectors; Warning the population in the event of a disaster or other significant hazards National Subsector B01 Registration Date Organization Country ID /0001 ICS National Ref Title Firefighting and fire protection - Portable generator - Part 3 Generating set <kleiner => 2 kva National Subsector B02 STRUCTURES Subsector B02 Registration Date Organization Country ID /0001 ICS National Ref Title Cladding for external walls - Principles of design and application - Part 1 Tiles fixed with mortar National Subsector B02 Registration Date Organization UNMZ Draft Issue Date Country Czech Republic Latest Date for Comments ID /0001 ICS National Ref Title Ground investigation Scope The aim of the new standard is unification of information for ground investigation

7 Page 7 National REV/AMD CSN (2016) Subsector B03 CONCRETE Subsector B03 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Non metallic expansive agents for cement mixings - Fitness and relevant checking methods Scope The standard specifies definition and requirements for non metallic expansive agents and describes the procedures to check fitness to eavey out their specific action. National REV/AMD UNI Subsector B03 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Not metallic expansive agents for cement mixings - Determination of restrained expansion of mortar Scope The standard defines a method to measure the expansion induced in a mortar containing of the expansive agent in a condition of restrained expansion. National REV/AMD UNI Subsector B03 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Not metallic expansive agents for cement mixings - Determination of restrained expansion of concrete Scope The standard defines a method to measure the expansion induced in a concrete containing the expansive agent, in a condition of restrained expansion. National REV/AMD UNI Subsector B03 Registration Date

8 Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Concrete - Determination of the resistance to the degrade due to freeze-thaw cycles Scope The standard defines test methods to determine the resistance to internal degrade due to freeze-thaw cycles of concrete specimens prepared in laboratory, at workstation or taken in situ. National REV/AMD UNI Page 8 Subsector B03 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Testing fresh concrete - Determination of bleeding Scope This standard describes a method to determine the bleeding within a defined determine the bleeding within a defined time. The method is not suitable for concrete made with aggregate > 40 mm. National REV/AMD UNI Subsector B03 Registration Date Organization NBN Country Belgium ID BE664020/0001 ICS National Ref prnbn B Title Visible concrete Classifications and specifications National Subsector B08 DOORS AND WINDOWS Subsector B08 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B 5337 Title Internal doors - General requirements Scope This Austrian Standard is an amendment to ÖNORM EN for single and double leaf

9 Page 9 internal doors, intended for interior work; it also includes entry doors, doors for closed arcades and other doors inside a building. This ÖNORM specifies the generall requirements for internal door leaves and door frames at the moment of delivery. Installed internal doors are refered in ÖNORM B The requirements for external doors are described in ÖNORM B This standard does not reply to special doors like e.g. lift doors, sliding doors. National Subsector B25 GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector B25 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Gas measurement systems - Hourly based gas metering systems - Part 11-6 Interchangeability point multipoint devices - Test specifications for the evaluation of conformity Scope This document completes the requirements, already specified in the other parts of UNI/TS series, in order to allow interchangeability of gas meters designed for mass-market (<G10) and their associated devices. It defines, to Interchangeability purposes, test procedures for conformity evaluation of meters and gateways National REV/AMD UNI/TS Subsector B25 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Gas measurement systems Hourly based gas metering systems Part 12 Interchangeability of meters with Qmax 10m3/h with point to point communication Scope This technical specification completes the requirements, already specified in the relevant parts of UNI/TS series, in order to allow interchangeability of gas meters designed for mass-market (<G10) that communicate in point to point mode National Subsector B26 ROAD BUILG AND MAINTENANCE Subsector B26 Registration Date Organization MSZT Draft Issue Date

10 Country Hungary Latest Date for Comments ID /0001 Draft for public enquiry ICS , National Ref MSZ Title Asphalt Concrete produced with the use of Rubber Modified Bitumen 45/80-55 (RmB 45/80-55) Scope This standard gives requirements to Asphalt Concrete produced with the use of Rubber Modified Bitumen 45/80-55 (RmB 45/80-55). Page 10 National Subsector B26 (Secondary Subsector) Registration Date Organization MSZT Draft Issue Date Country Hungary Latest Date for Comments ID /0001 Draft for public enquiry ICS , National Ref MSZ Title Asphalt Concrete produced with the use of Rubber Modified Bitumen 45/80-55 (RmB 45/80-55) Scope This standard gives requirements to Asphalt Concrete produced with the use of Rubber Modified Bitumen 45/80-55 (RmB 45/80-55). National Subsector B26 Registration Date Organization SNV Draft Issue Date Country Switzerland Latest Date for Comments ID CH160016/0001 Draft for public enquiry ICS National Ref prsn Title Mastic asphalt; Conception, execution and requirements to the built-in layers National REV/AMD SN c2008 Subsector B29 AGGREGATES Subsector B29 Registration Date Organization Country ID /0001 ICS National Ref Title Recycled aggregates for concrete - Part 101 Environmental requirements and types of aggregate supplied (in accordance with EN 12620)

11 Page 11 National Subsector B29 Registration Date Organization Country ID /0001 ICS National Ref Title Recycled aggregates for concrete - Part 102 Quality assurance (type testing and factory production control) National Subsector B99 UNDETERMINED Subsector B99 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B 2215 Title Wood working - Contract to provide services Scope This Austrian Standard gives methods and contractual provisions for timber structure works. National Subsector B99 Registration Date Organization Country ID /0001 ICS National Ref Title Sports grounds - Part 1 Outdoor play and athletics areas - planning and dimensions National ** End of Sector **

12 Information procedure Page 12 Monthly Notifications Register Notifications registered at CCMC from to Sector C CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on

13 Subsector C01 Food products Page 13 Subsector C01 Registration Date Organization Country ID /0001 ICS National Ref Title Food hygiene - Retained samples in mass catering National Subsector C01 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NTA Concept nl Title Prerequisite programs on food safety for storage and distribution Scope This document specifies requirements for establishing, implementing and maintaining prerequisite programs (PRPs) to assist in controlling food safety hazards. This document is applicable to all organizations, regardless of size or complexity, which are involved in the storage and distribution step of the food chain, that wish to implement PRPs in such a way as to address the requirements specified in Clause 7 of ISO The document is neither designed nor intended for use in other parts of the food supply chain or in isolation. However, this document may be applied by other organizations willing to develop codes of practice and other types of supplier-buyer relationships based on ISO Food storage and distribution operations are diverse in nature and not all of the requirements specified in this NTA apply to an individual establishment or process. Where exclusions are made or alternative measures implemented, these need to be justified by a risk assessment. Any exclusions or alternative measures adopted should not affect the ability of the organization to comply with these requirements. National Subsector C01 Registration Date Organization MSZT Country Hungary ID /0001 ICS , National Ref MSZ Title Food grade salt (Sodium chloride) National REV/AMD MSZ Subsector C01 (Secondary Subsector) Registration Date

14 Page 14 Organization Country MSZT Hungary ID /0001 ICS , National Ref MSZ Title Food grade salt (Sodium chloride) National REV/AMD MSZ Subsector C13 FERTILIZERS Subsector C13 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM S 2021 Title Growing media - Quality requirements and test methods Scope This ÖNORM regulates quality requirements and test methods for growing media that are placed on the market according to the Fertilizer Ordinance of It specifies the requirements to be met by growing media. The aim is to achieve an optimal plant growth when used as recommended these products. National Subsector C17 TREES AND PLANTS Subsector C17 Registration Date Organization ASRO Draft Issue Date Country Romania Latest Date for Comments ID /0001 ICS National Ref SR Title Sugar beet for industrialization Scope General information, technical requirements, rules for quality checking, testing and analyzing methods for sugar beet for industrialization in order to extract the sugar or for the production of bioethanol and biogas National REV/AMD STAS (withdrawn) ** End of Sector **

15 Information procedure Page 15 Monthly Notifications Register Notifications registered at CCMC from to Sector F FUNDAMENTAL STANDARDS Register issued on

16 Subsector F12 INFORMATION PROCESSING SYSTEMS Page 16 Subsector F12 Registration Date Organization TSE Country Turkey ID tst13582/0001 ICS National Ref Title Secure Card Access Devices for Electronic Identity Cards - Part 1 Overview Scope This Standard specifices general features and characteristics of identification card access devices used for national identification card systems. National Subsector F12 Registration Date Organization TSE Country Turkey ID tst13583/0001 ICS National Ref Title Secure Card Access Devices for Electronic Identity Cards - Part 2 Interfaces and their characteristics Scope This Standard includes interfaces and their characteristics of card access devices used for national identification card systems. National Subsector F12 Registration Date Organization TSE Country Turkey ID tst13584/0001 ICS National Ref Title Secure Card Access Devices for Electronic Identity Cards - Part 3 Security Specifications Scope This standard includes issues related to security for card access devices of national identity cards. National Subsector F12 Registration Date Organization TSE Country Turkey ID tst13585/0001 ICS National Ref

17 Title Scope National Secure Card Access Devices for Electronic Identity Cards - Part 4 KEC Application Software Specifications This standard includes KEC Application software characteristics for card access devices of national identity cards. Page 17 Subsector F20 QUALITY ASSURANCE Subsector F20 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM ISO Title Quality management systems - Guidelines for configuration management Scope This International Standard gives guidance on the use of configuration management within an organization. It is applicable to the support of products and services from concept to disposal. National Subsector F99 UNDETERMINED Subsector F99 Registration Date Organization Country ID /0001 ICS National Ref Title Measures against counterfeiting - Guidelines for the preparation of protection concepts against counterfeiting, illegal reproduction and trade of illegal goods National ** End of Sector **

18 Information procedure Page 18 Monthly Notifications Register Notifications registered at CCMC from to Sector I MECHANICAL ENGINEERING Register issued on

19 Subsector I02 FASTENERS Page 19 Subsector I02 Registration Date Organization Country ID /0001 ICS National Ref Title Lifting eye bolts National Subsector I02 Registration Date Organization Country ID /0001 ICS National Ref Title Lifting eye nuts National Subsector I02 Registration Date Organization Country ID /0001 ICS National Ref Title Retaining rings for bores - Normal type and heavy type National Subsector I02 Registration Date Organization Country ID /0001 ICS National Ref Title Retaining washers for shafts National Subsector I06 PRESSURE VESSELS

20 Page 20 Subsector I06 Registration Date Organization Country ID /0001 ICS National Ref Title Tolerances for agitator vessels - Part 1 Agitator vessels of metallic materials National Subsector I09 SMALL TOOLS Subsector I09 Registration Date Organization Country ID /0001 ICS National Ref Title Tabular layouts of properties - Part 102 Data exchange for tabular layouts of properties with XML schema National Subsector I11 MACHINE TOOLS Subsector I11 Registration Date Organization TSE Country Turkey ID t /0001 ICS National Ref Title Springs - Quality requirements - Cylindrical helical compression springs - Part 1 Made from round wire and rods, hot formed Scope This standard covers hot formed compression springs made of round steel as shown in the standard. The permissible deviations specified in this standard apply to helical compression springs which satisfy the following National European Modified Subsector I19 NUCLEAR ENERGY Subsector I19 Registration Date Organization ASI Country Austria

21 Page 21 ID /0001 ICS , National Ref ÖNORM S Title Estimation of effective dose at planned exposition situations with natural radioactive material - Part 2 Dose evaluation Scope This ÖNORM deals with the estimation of effective dose at planned exposition situations with natural radioactive material, especially in case of increased expositions through Rn-222, uranium or thorium and their secundary products (without radon). The calculation of the effective dose from measurment data ist examined. This ÖNORM is for determining the dose at at planned exposition situations with natural radioactive material and shall be applied in operations from staff dealing self-dependently in fields with expected increased exposition through natural radioactive material. National Subsector I19 Registration Date Organization ASI Country Austria ID /0001 ICS , , National Ref ÖNORM S Title Radon - Part 1 Metrological tasks and evaluation Scope Radon and its secundary products exposes the general public to potential health risks. Comprehensive studies in Austria indicate an indoor average value of radon of 100 Bq/m3. The inhalation of radon causes about 40 % of the entire effective dose of the exposition sum of natural and simulated radiation sources. In this connection the present ÖNORM describes different metrological tasks, appropriate measuring methods and the evaluation of the results in regard to the standard value. National Subsector I34 NON-FERROUS METALLIC PIPES Subsector I34 Registration Date Organization Country ID /0001 ICS National Ref Title Warm water surface heating systems and radiator connecting systems - Plastics piping systems and multilayer piping systems National ** End of Sector **

22 Information procedure Page 22 Monthly Notifications Register Notifications registered at CCMC from to Sector M METALLIC MATERIALS Register issued on

23 Subsector M16 MECHANICAL TESTS FOR METALS Page 23 Subsector M16 Registration Date Organization Country ID /0001 ICS National Ref Title Testing of metallic materials - Metallographic Micrographs - Picture scales and formats National ** End of Sector **

24 Information procedure Page 24 Monthly Notifications Register Notifications registered at CCMC from to Sector N NON-METALLIC MATERIALS Register issued on

25 Subsector N03 PETROLEUM PRODUCTS Page 25 Subsector N03 Registration Date Organization Country ID /0001 ICS National Ref Title Lubricants - Processing fluids for forming and machining of materials - Metalworking and forming fluids Requirements and test methods National Subsector N05 TEXTILES Subsector N05 Registration Date Organization Country ID /0001 ICS National Ref Title Geosynthetics - Determination and testing of the interaction coefficient to the soil using pullout test National Subsector N05 Registration Date Organization Country ID /0001 ICS National Ref Title Textile slings - Safety - Disposable flat woven slings, made of man-made fibres National ** End of Sector **

26 Information procedure Page 26 Monthly Notifications Register Notifications registered at CCMC from to Sector S HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on

27 Subsector S01 ACOUSTICS AND SOUND INSULATION Page 27 Subsector S01 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Acoustics - Operational guidelines for editing information about noise emission of machines Scope The technical report provides a operational guidance for editinginformation about noise emissions of machines and produces a format to facilitate the manufacturers to report in the user guide the information in accordance with current legislation. he technical report applies to machines subject to the Machinery Directive 2006/42 / EC and Directive 2000/14 / EC for outdoor equipment. National Subsector S08 AIR QUALITY Subsector S08 Registration Date Organization PKN Country Poland ID /0001 ICS National Ref prpn-z Title Air purity protection -- Determination of toluene-2,4-diisocyanate and toluene-2,6- diisocyanate in workplaces by high performance liquid chromatography Scope This standard gives a method for the determination of the content of toluene 2,4- diisocyanate (CAS ) and toluene-2,6-diisocyanate (CAS ) in workplace air by high performance liquid chromatography. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of toluene-2,4-diisocyanate and toluene-2,6-diisocyanate which can be determined by the method in the sampling and determination conditions specified in the standard is 0,00014 mg/m3 National Subsector S08 Registration Date Organization PKN Country Poland ID /0001 ICS National Ref prpn-z Title Air purity protection -- Determination of N,N-dimethylacetamide in workplaces by gas chromatography with flame-ionization detection Scope This standard gives a method for the determination of the content of N,Ndimethylacetamide (CAS ) in workplace air by gas chromatography with flameionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of N,N dimethylacetamide which can be determined

28 by the method in the sampling and determination conditions specified in the standard is 1 mg/m3 Page 28 National Subsector S09 WATER QUALITY AND WATER SUPPLY Subsector S09 Registration Date Organization ASI Country Austria ID /0001 ICS , National Ref ÖNORM B 2572 Title On-Site Systems for the use of rainwater and greywater National supplements to ÖNORMEN EN and -2 Scope This standard contains complementary provisions and requirements for design, sizing, installation, identification, commissioning and maintenance of rainwater- and greywater systems for the use on-site and has to be applied together with ÖNORM EN Part 1 and 2. National Subsector S09 Registration Date Organization Country ID /0001 ICS National Ref Title German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 13 Sampling from aquifers (A 13) National Subsector S27 WASTE - CHARACTERIZATION, TREATMENT AND STREAMS Subsector S27 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM S 2100 Title List of wastes Scope This Austrian Standard has the purpose to consolidate the waste types and the names used for this purpose, code numbers together with any specifications stating the GTIN for any waste according to AWG 2002.

29 Page 29 National Subsector S99 UNDETERMINED Subsector S99 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM L 1135 Title Assessment of vegetation areas according to ecological criteria Scope This ÖNORM specifies those parameters used in an ecological assessment (performance evaluation) for example in the context of environmental issues. For this purpose, the relevant terms, a classification of performance, the general process of review and the minimum requirements of evaluation methods are determined. National Subsector S99 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Adoption and effective implementation of the Organizational and Management Models (MOG) of health and safety - Asseveration procedure by Italian Joint Bodies Scope Legislative Decree 81/2008 allows the asseveration of the adoption and effective implementation of the organizational and management models of health and safety at work as declined in art. 30 of same legislative decree, with the aim to prevent the crimes referred to the art. 25 septies of Legislative Decree 231/01. This option is left to the Joint Bodies constituted of associations of employers and workers between the most representative at national level. However, the law does not give a resolution about the kind of requirement or procedures for the asseveration activity, except for the one, declined in paragraph 3b of art. 51 of the Decree 81, according to which "for the purposes referred to paragraph 3 bis, the joint bodies establish specific joint commissions, technically competent". It is therefore useful and necessary a technical report that provides methods and tools for carrying out the verification activity of MOG implemented by companies with the aim to attest the effective actuation of the organizational and management models by the Joint Bodies. National Subsector S99 Registration Date Organization Country

30 Page 30 ID /0001 ICS National Ref Title AutoID systems for the digital identification and classification - Part 1 Numbering structure National Subsector S99 Registration Date Organization Country ID /0001 ICS National Ref Title Quality control of multi-modal imaging - Part 2 Routine test SPECT/CT National Subsector S99 Registration Date Organization Country ID /0001 ICS National Ref Title Processes in radiology - Part 1 Diagnosis of a imaging or image-based procedure National Subsector S99 Registration Date Organization Country ID /0001 ICS National Ref Title Image quality assurance in diagnostic X-ray departments - Part 100 Determination of physical parameters for the evaluation of the image quality in digital mammography National Subsector S99 Registration Date Organization Country ID /0001

31 Page 31 ICS National Ref Title Identification and characterization of radiological images in medical diagnosis - Part 2 Passing on of radiographs and related records in digital radiography, digital fluoroscopy, cone-beam computed tomography and computed tomography National Subsector S99 Registration Date Organization Country ID /0001 ICS National Ref Title Nuclear medicine departments - Part 3 Radiation protection calculations National ** End of Sector **

32 Information procedure Page 32 Monthly Notifications Register Notifications registered at CCMC from to Sector T TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on

33 Subsector T02 AEROSPACE Page 33 Subsector T02 Registration Date Organization Country ID /0001 ICS National Ref Title Aerospace - Determination of coefficient of friction of bolt/nut assemblies under specified conditions; Text in German and English National Subsector T10 FREIGHT CONTAINERS Subsector T10 Registration Date Organization Country ID /0001 ICS National Ref Title Food hygiene - Mass Catering; Amendment 1 National Subsector T12 INDUSTRIAL TRUCKS Subsector T12 Registration Date Organization LVS Draft Issue Date Country Latvia Latest Date for Comments ID /0001 ICS National Ref LVS 449 Title Tractors, self propelled vehicles and their trailers types. Definitions Scope This standard defines tractors self-propelled and their trailers groups and definitions of their vehicle groups. This standard set of tractors, self-propelled and their trailers groups and this group in definitions. Groups and definitions are established without changing the manufacturer's intended use. National REV/AMD LVS 449 Subsector T15 CYCLES Subsector T15 Registration Date Organization

34 Country ID /0001 ICS National Ref Title Cycles - Transportation bikes and cargo bikes - Requirements and test methods for single- and multi-track cycles Page 34 National Subsector T19 ROAD SAFETY Subsector T19 Registration Date Organization SNV Draft Issue Date Country Switzerland Latest Date for Comments ID CH160015/0001 Draft for public enquiry ICS National Ref prsn Title Road Safety - Audit National REV/AMD SN ** End of Sector **

35 Information procedure Page 35 Monthly Notifications Register Notifications registered at CCMC from to Sector Z INFORMATION TECHNOLOGY Register issued on

36 Subsector Z99 UNDETERMINED Page 36 Subsector Z99 Registration Date Organization TSE Country Turkey ID tst13678/0001 ICS National Ref Title Electronic Identity Verification System for Turkish National Identity Cards - Part 1 Overview and Turkish National Identity Card Scope This part of "Electronic Identity Verification System for Turkish National Identity Cards" developed by TÜBİTAK BİLGEM defines the "Electronic Identity Verification System" in general. Also, Identity Card Data Structure and Identity Card Data Access Rules are defined in this section. National Subsector Z99 Registration Date Organization TSE Country Turkey ID tst13679/0001 ICS National Ref Title Electronic Identity Verification System for Turkish National Identity Cards - Part 2 Identity Verification Server Scope This part of "Electronic Identity Verification System for Turkish National Identity Cards" developed by TÜBİTAK BİLGEM defines the properties of server which validates the identity authentication asertions on behalf of the company where service is taken. National Subsector Z99 Registration Date Organization TSE Country Turkey ID tst13680/0001 ICS National Ref Title Electronic Identity Verification System for Turkish National Identity Cards - Part 3 Identity Verification Policy Server Scope This part of "Electronic Identity Verification System for Turkish National Identity Cards" developed by TÜBİTAK BİLGEM defines the properties of server which is used to define the authentication policies that will be used in the identity authentication operations of the company where service is taken. National Subsector Z99 Registration Date Organization TSE

37 Country Turkey ID tst13681/0001 ICS National Ref Title Electronic Identity Verification System for Turkish National Identity Cards - Part 4 Role Server Scope This part of "Electronic Identity Verification System for Turkish National Identity Cards" developed by TÜBİTAK BİLGEM defines the properties of the Role Server. Page 37 National ** End of Sector **

38 List of non-electrotechnical subsectors Sector A Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

39 Sector B Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; ; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete ; CEN/WS 009 B04 Cement 74; B05 Fire tests B06 Gypsum / 241 B07 Glass B08 Doors and windows B09 Thermal matters ; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures B11 Metal structures B12 Masonry 179; ; 246 B13 Solar energy B14 Geotechnics ; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

40 B33 Building design ; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

41 Sector C Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products ; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products ; 298; 173 C03 Chemistry ; 363 C04 Laboratory glassware C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants C10 Starch 93 / C11 Tobacco C12 Glass plant / / C13 Fertilizers ; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; ; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics C22 Bio-Based products / 411 C99 Undetermined / 386

42 Sector F Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; ; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information ; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems ; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general ; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; ; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

43 CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

44 Sector H Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating ; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture H10 Sewing machines 148 / H11 Heater controls H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans H15 Toys H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG H99 Undetermined / 299; 364; 369; 402

45 Sector I Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes I06 Pressure vessels I07 Shafts 14 / I08 Agricultural machines , 334 I09 Small tools I10 Splines / / I11 Machine tools ; 143; 145; 255 I12 Pulleys & belts I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry I16 Internal combustion engines 70; I17 Machinery in general 72; ; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps I24 Industrial fans I25 Compressors I26 Plain bearings 123 / I27 Earth moving and construction 127; equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; ; 236; 105 I32 Flanges / 74 I33 Information processing in automation I34 Non-ferrous metallic pipes / /

46 I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

47 Sector M Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, ; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper M05 Welding M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys M09 Iron ores 102 / M10 Metallic coatings M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion ; 219

48 M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

49 Sector N Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board N02 Solid fuels ; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories N05 Textiles ; 248 N06 Rubber ; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics N10 Cork 87 / N11 Wood-based panels N12 Timber products 99 / N13 Leather N14 Plastics pipes N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics N21 Gaseous fuels and combustible gas 158; ; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

50 Sector S Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound ; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry S06 Vibration & shock S07 Anaesthetic and respiratory equipment S08 Air quality ; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply ; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants ; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled S17 Respiratory protective devices / 79 S18 Sterilization of equipment ; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical ; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality ; CEN/WS 032

51 S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF ; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

52 Sector T Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; ; 300 structures T02 Aerospace ; AECMA; ECSS ;377 T03 Road vehicles ; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers ; 221; 265; 266; 268; T07 Glass containers 63 / T08 Cranes T09 Materials handling and ; 149 storage equipment T10 Freight containers ; 280 T11 Steel wire ropes 105 / T12 Industrial trucks ; 324 T13 Lifting chains, hooks and ropes T14 Packaging ; 120 T15 Cycles T16 Lifts & escalators ; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

53 Sector Z Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

54 CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr