NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (June, 2016)

Size: px

Start display at page:

Download "NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (June, 2016)"

Eleanore Dorothy Campbell
5 years ago
Views:

1 NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (June, 2016) Sector/ Subsector National Standardization Body Document Title 1 B01 EVS-Estonia prevs 871 Fire safety and emergency exit doors and door hardware - Use Fire protection 2 NBN-Belgium prnbn S Fire safety in buildings - Ventilation openings in indoor staircases 3 prnbn S Fire detection and fire alarm systems - Voice Alarm Systems - Part 1: Selection criteria for Voice Alarm Systems 4 B02 Structures ASI-Austria ÖNORM B /A Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings - National specifications concerning ÖNORM EN , national commnts and national supplements 5 ÖNORM B Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing - National specifications in connection with ÖNORM EN and national supplements 6 BAS-Bosnia and Herzegovina nsbas EN /NA:2016 Eurocode 1 - Actions on structures - Part 1-5: General actions - Thermal actions - National annex 7 DIN-Germany House service connections facilities - Pinciples for planning 8 UNMZ-Czech Bitumen and bituminous binders Bitumens for paving Republic 9 B04 BDS-Bulgaria prbds Cement. Determination of mineral composition of the clinker in the cement Cement 10 prbds 9192 Cement. Determination of the tricalcium aluminate content 11 B05 DIN-Germany DIN Fire and smoke control door and shutter assemblies in accordance with DIN EN Installation and maintenance Fire tests 12 B12 Masonry DIN-Germany Application of building products in structures - Part 402: Rules for the application of calcium silicate masonry units according to DIN EN 771-2: Application of building products in structures - Part 404: Rules for the application of autoclaved aerated concrete masonry units according to DIN EN 771-4: Application of building products in structures - Part 401: Rules for the application of clay masonry units according to DIN EN 771-1: B25 Gas distribution installation and related equipment NEN-Netherlands NPR :2016 Guidelines for gas installations - Section gas pipe work - Part 13: Commissioning, operation and maintenance of gas pipe work with a maximum operating pressure 500 mbar 16 NPR : NPR : NPR : B26 Road building and maintenance Guidelines for gas installations - Section flue system - Part 47: Single flues for type B gas appliances - Choice of constructions and materials and dimensioning with the help of tables - Guidance to NEN Guidelines for gas installations - Section gas pipe work - Part 7: Gas underground pipe work - Guidelines for NEN 1078 and NEN 8078 Code of practice gas installations - Section gas pipe work - Part 8: Feeding of gas pipe work through walls and floors - Guidelines for NEN 1078 a nd NEN 8078 ASI-Austria ÖNORM B Bituminous mixtures - Guidline for the preparation of declarations of performance - Part 1: Empirical approach 20 ÖNORM B Bituminous mixtures - Guidline for the preparation of declarations of performance - Part 2: Performance based approach

2 21 ÖNORM B 3588 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) - Rules for the implementation of ÖNORM EN LST-Lithuania Bituminous mixtures for motor road. Requirements for activated mineral filler 23 Bituminous mixtures for motor road. Testing methods for activated mineral filler 24 B29 BDS-Bulgaria prbds Crushed natural additive materials for fire-resistant concrete and mortars Aggregates 25 B30 Floor and surfacing ASI-Austria ÖNORM B Florrings for sports grounds - Part 3: Synthetic and bituminous bound surfaces 26 B31 Heating systems in buildings 27 B32 Precast concrete products SN-Norway prns 3420-BM Specification texts for building, construction and installations Part BM: Ventilation and air conditioning integrated systems BSI-United Kingdom BS 8297 Design, Manufacture and installation of architectural precast concrete cladding. Code of practice 28 B34 MCCAA-Malta SM 3700 Construction of Green Roofs Building and construction Environmental aspect 29 SM 6200 Minors in marketing communication 30 B99 DIN-Germany Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer 31 C01 NEN-Netherlands NEN 6817:2016 Milk and milk products - Enumeration of faecal enterococci Food products 32 NEN 6820:2016 Milk and milk products - Detection of unwanted contamination of long shelf life liquid milk products 33 TSE-Turkey Edible oils of vegetable origin (not subject of a specific standard) 34 Macaroni 35 Pepper Pickle 36 Animal and Vegetable Fats and Oils-Determination and Detection of Mineral Oil 37 Traditional sour pomegranate concentrate 38 Ayran 39 Mayonnaise 40 Lavash 41 Biscuits 42 F05 BSI-United Kingdom BS 7996 Torque measuring devices. Calibration and classification usingcontinual torque application. Method Measuring instruments 43 DIN-Germany DIN Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements; maximum permissible errors 44 DIN 2270 Geometrical Product Specifications (GPS) - Dial test indicators (lever type) - Maximum permissible errors 45 F06 Terminology principles DIN-Germany DIN 2347 Translation and interpreting services - Interpreting services - Interpreting at conferences

3 46 F07 BSI-United Kingdom BS 4971 Conservation and care of archive and library collections Documentation and information, 47 F14 Graphical technology, signboards and nameplates 48 F15 Material testing in general 49 F19 Optics UNI-Italy UNI Method for the determination of non-original toner cartridge print quality for monochromatic electrophotographic printer - Method of comparison: non-original toner cartridge vs original toner cartridge DIN-Germany Thermal analysis; differential thermal analysis; principles DIN-Germany DIN Production in optical engineering - Diamond core drills - Part 1: With fitting thread 50 DIN Production in optical engineering - Diamond core drills - Part 2: With fitting cylinder 51 DIN Production in optical engineering - Diamond core drills - Part 3: With external fitting thread 52 F99 BSI-United Kingdom BS 0 A standard for standards. Principles of standardization 53 I02 DIN-Germany Measuring- and test parameters for cold formed cylindrical helical compression springs Fasteners 54 DIN 7513 Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing 55 DIN 7516 Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing 56 I11 DIN-Germany Firefighting and fire protection - Portable generator - Part 1: Generating set <größer => 5kVA Machine tools Firefighting and fire protection - Portable generator - Part 2: Generating set <kleine > 5 kva 58 I19 ASI-Austria ÖNORM S Medical remote-controlled automatically-driven afterloading systems - Part 1: Acceptance testing of functional performance characteristics Nuclear energy 59 DIN-Germany DIN Components for hot cells - Part 1: Requirements on design for remote handling Procedures of dosimetry with probe-type detectors for proton and ion radiation Part 1: Ionization chambers 61 I28 DIN-Germany Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements Fluid power Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements 64 I31 DIN-Germany Valves for drinking water installations on private premises - Anti-vacuum valve Types D and E - Requirements and tests Valves 65 TSE-Turkey Blistered panels - High density polyethylene (HDPE) - Used for foundation wall protection and drainage works 66 M01 ASI-Austria ÖNORM B 4707 Steel for the reinforcement of concrete - Requirements and classification Steel 67 M05 DIN-Germany DIN Numerical welding simulation - Execution and documentation (ISO/TS 18166:2016); German version CEN ISO/TS 18166:2016 Welding Graphical Representation of Welded, Soldered and Brazed Joints - Concepts and Terms for Soldered and Brazed Joints and Seams 69 M16 DIN-Germany DIN Testing of metallic materials - Rockwell hardness test - Part 3: Modified Rockwell scales Bm and Fm for thin steel sheet Mechanical tests for metals 70 N01 Paper and board SIST-Slovenia dsist TS 1190:2016 Paper and board (paperboard, cardboard and corrugated board) Archive quality for preparation of the record, document, books, and for protection of document materials on paper 71 ASI-Austria ÖNORM A 1123 Paper and board intended to come into contact with foodstuffs - Conditions for determination of overall migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant

4 72 N03 MSZT-Hungary MSZ 1648 Natural gas for public utility services Petroleum products 73 MSZ 459 Determination of Asfaltenes in Crude Petroleum and Petroleum products with n- HeptaneDetermination of Asfaltenes in Crude Petroleum and Petroleum products with n- Heptane 74 N09 DIN-Germany Polyethylene (PE) pipes - PE 80, PE General quality requirements, testing; Text in German and English Plastics 75 N11 DIN-Germany Wood adhesives - Determination of properties of use of wood adhesives for load-bearing timber structures Wood-based panels 76 N14 NBN-Belgium prnbn T Plastics piping systems Polypropylene (PP) modules for water infiltration and storage Requirements and methods of test Plastics pipes 77 N20 DIN-Germany Ceramics, glass, glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food Ceramics 78 N21 Gaseous fuels and combustible gas UNI-Italy UNI Method for the assessment of potential production of methane from anaerobic digestion in wet conditions 79 S04 Protective clothing and equipment SIS-Sweden Health care textiles - Fabrics for use in health care - General requirements - Characteristics, testing and inspection Health care textiles Operating textiles Clean air suit 81 NEN-Netherlands NEN 8333:2016 Protective clothing - Clothing that protects against ticks and that has been treated with permethrin 82 S05 DIN-Germany Dentistry - Jaw relation recording material Dentistry 83 S06 Vibration & shock ASI-Austria ÖNORM ISO Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 1: General guidance 84 S08 Air quality 85 S16 Aids for the disabled 86 S20 Waste collection, handling and transportation NEN-Netherlands NPR 8114:2016 Stationary source emissions - Quality assurance of automated measuring systems DIN-Germany Tactile walking surface indicators in public areas UNI-Italy UNI Refuse collection vehicles - Levels of performance and ways and conditions of acceptance of street cleaning and municipal waste management services - Part 1: General requirements 87 UNI Refuse collection vehicles - Levels of performance and ways and conditions of acceptance for street cleaning and municipal waste disposal services - Part 2: Ways to measure the levels of performance and to settle the acceptance, to draw up and to operate contracts for general or separate collection services of municipal waste, container cleaning and maintenance, abandoned waste removal 88 UNI Waste management - Waste visual elements - Visual elements for waste containers 89 DIN-Germany DIN CleANopen - Application profile for municipal vehicles; English version CEN/TR 16815, only on CD-ROM 90 S26 Environmental management UNI-Italy UNI Environmental Management of Products - Estimation, reporting and use of the uncertainty of Life Cycle Assessment (LCA) results - Requirements and guidelines

5 91 S99 ASRO-Romania SR 13573:2016 Sterilization of medical waste Requirements for development, validation and routine control of a low temperature sterilization process of medical waste by multi-action treatment using microwave field, ultraviolet light and ozone 92 UNI-Italy UNI Confined spaces - Classification and safety criteria 93 DIN-Germany Recording in medical application of ionizing radiation - Part 3: Brachytherapy with enclosed radiation sources Image quality assurance in diagnostic X-ray departments - Part 16: Documentation of clinical image processing parameters in digital X-ray systems 95 T01 Shipbuilding and maritime structures DIN-Germany Replenishment of ships with liquefied natural gas (LNG) as a fuel - Technical delivery conditions and test criteria for couplings - Part 1: Dry couplings 96 T02 DIN-Germany DIN Aerospace series - Sleeves - Wall thickness 0,5 mm, for fasteners with reduced countersunk head; Text in German and English Aerospace 97 T03 LVS-Latvia LVS 63:2015/prA1 Ministery of Defence - Military police vehicles and Ministery of Internal Affairs vehicles, their painting and equipment Road vehicles 98 BSI-United Kingdom BS 10125:2014+A1 Automotive services. Specification for vehicle damage repair process. Amendment 99 SIS-Sweden Commercial road vehicles Drawbar coupling Interchangeability Installations Commercial road vehicles 57 mm clevis coupling Interchangeability Commercial road vehicles drawbar eye Interchangeability Installations Commercial road vehicles 57 mm drawbar eye Interchangeability 103 T09 Materials handling and storage equipment ASI-Austria ÖNORM B Terminals for transshipment of goods - Planning - Part 3: Railway sidings 104 ÖNORM B Terminal for transshipment of goods - Planning - Part 5: Terminals for combined traffic 105 T14 DIN-Germany DIN Packaging test - Testing of seams of sacks - Part 1: Determination of endurance of seams of paper sacks Packaging 106 T18 Elevating platforms BSI-United Kingdom BS 7981 Code of practice for the installation, maintenance, thorough examinationand safe use of mast climbing work platforms (MCWPs) 107 BS 5974 Temporary suspended access equipment 108 W08 BSI-United Kingdom BS 7671 Electrical Installations of Buildings Electric cables 109 W11 CEB-BEC-Belgium NBN C Plugs and socket-outlets for household and similar purposes. Part 1: General Electrical accessories 110 W27 MSZT-Hungary MSZ 1585 Operation of electrical installations (EN and national supplementations) Electrical installations in buildings 111 X01 IPQ-Portugal prnp 4552 Management system reconciling professional, family and personal life. Requirements standardization area (nonelectrical) 112 Z99 SIS-Sweden Reference architecture for Internet of Things 113 BSI-United Kingdom BS Cyber risk and resilience. Guide

Monthly Notifications Register

Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2016-06-01 to 2016-06-30 Register issued on 2016-07-01 A list of subsectors can be found at the end of