NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (August, 2017)
|
|
- Elwin Cole
- 5 years ago
- Views:
Transcription
1 NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (August, 2017) Sector/ Subsector 1 A09 Facility management National Standardization Body Document SN-Norway NS 6460 Operation of technical building installations Title 2 A11 TSE-Turkey Work place - Rules for compressed natural gaz (CNG) filling plants Security Services 3 A99 UNI-Italy UNI Personal financial planning - Guideline for the application of UNI ISO 22222: Part 1: Terminology, classification and requirements of service for planners 4 B01 ASI-Austria ÖNORM F 3700 Fire protection systems - General Fire protection 5 ÖNORM F 3072 Maintenance of wet extinguishing systems 6 ÖNORM F 3073 Maintenance of fire prevention systems using an oxygen reduced atmosphere 7 NEN-Netherlands NEN :2012/A2:2017 Concept nl Fire safety of buildings - Evacuation alarm installations - System and quality requirements and guidelines for locating of alarm devices - Part 3: Loud alarm evacuation alarm installation type B 8 B02 DIN-Germany DIN Components for enclosures made of textile fabrics and plastic films (awnings) - Part 1: Structures and tents Structures 9 DIN Components for enclosures made of textile fabrics and plastic films (awnings) - Part 101: Conformity accessment for tents and halls according to DIN B10 Timber structures SIST-Slovenia SIST EN :2005/oA102:2017 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings - National Annex 11 B17 Lighting equipment and lighting application technology SNV-Switzerland prsn Public lighting in street tunnels, galleries and underpasses - Part 1: Lighting requirements, terms and quality features 12 prsn Public lighting in street tunnels, galleries and underpasses - Part 2: Planning and design of the lighting installation 13 prsn Public lighting in street tunnels, galleries and underpasses - Part 3: Method for measuring and evaluating quality features 14 B20 Drainage equipment UNI-Italy UNI Guideline for the installation for gully tops and manhole tops for pedestrian and/or vehicular areas 15 B25 Gas distribution installation and related equipment UNI-Italy UNI Gas measurement systems Hourly based gas metering systems nterchangeability of meters with Qmax 10m3/h with point to point communication - Part 12-2: Data model 16 UNI Gas measurement systems Hourly based gas metering systems nterchangeability of meters with Qmax 10m3/h with point to point communication - Part 12-4: PP4 Communication profile 17 UNI Gas measurement systems Hourly based gas metering systems nterchangeability of meters with Qmax 10m3/h with point to point communication - Part 12-6: Specifications for conformity assessment
2 18 B26 Road building and maintenance 19 B28 Floor coverings 20 B33 Building design 21 B99 BS 1707 ASI-Austria ÖNORM B 5236 Planing and Laying of floor coverings Road surface dressing, bond coats, seals, preservatives and other sprays Specification for the method of test for binder sprayers for accuracy ofspread of binder (spray bar bench test) MSZT-Hungary MSZ Siting in nature areas. Design Plans intended to demonstrate integration into nature areas. Detailed specifications of siting plans ASI-Austria ÖNORM B Real estate evaluation - Principles 22 ÖNORM B 2204 Execution of vertical components - Contract to provide services 23 UNI-Italy UNI Building and civil engineering works Digital management of the informative processes Part 9: Informative management in working stage (Collaborative Digital Platform, Building Paper) 24 C01 Food products LST-Lithuania Grain products. Groats and flakes 25 MSZT-Hungary MSZ Beer. Sensory analysis 26 MSZ Test methods for bakery products. Sensory analysis. Qualification on points 27 MSZ Sensory analysis of meat products. Part 1: Salami and sausages 28 MSZ Sensory analysis of meat products. Part 2: Cold cuts 29 MSZ Sensory analysis of meat products. Part 3: Parisers, frankfurter, crinoline 30 C02 Paints and related products DIN-Germany DIN Colouring materials - Conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics 31 DIN Pigments and extenders - Determination of lightness of extenders and white pigments in powder form 32 C04 DIN-Germany Laboratory glassware; laboratory thermometers, scale values 0,1 C, 0,2 C and 0,5 C Laboratory glassware Laboratory glassware - Anschütz thermometer set Laboratory glassware - laboratory thermometers, smallest scale division 1 C and 2 C Laboratory glassware - solid stem general purpose thermometers Laboratory glassware - Density hydrometers - Part 1: General requirements Laboratory glassware - hydrometers, principles of construction and adjustment 38 F05 EVS-Estonia prevs 912 Non-automatic weighing instruments - Verification procedure Measuring instruments 39 prevs 913 Fuel dispensers - Verification procedure 40 BS 8499:2017 Specification for domestic gas meter boxes and meter bracket 41 F15 ASI-Austria ÖNORM M 3041 Training of personnel carrying out non-destructive testing (NDT personne Material testing in general 42 DIN-Germany ph-measurement - ph-measurement of aqueous solutions with ph combination electrodes with ph glass electrodes and evaluation of measurement unce 43 F16 Graphical symbols DIN-Germany Printing technology - Type sizes - Part 2: Digital typesetting and related techniqu 44 F20 Quality assurance ASI-Austria ÖNORM ISO Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations
3 45 ÖNORM ISO Quality management systems - Customer satisfaction - Guidelines for complaints handling in organizations 46 ÖNORM ISO Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations 47 ÖNORM ISO Quality management - Customer satisfaction - Guidelines for monitoring and measuring 48 ÖNORM ISO Project, programme and portfolio management - Guidance on programme management 49 F21 Value analysis and project network EVS-Estonia prevs Property valuation - Part 8: Cost approach 50 prevs Property valuation - Part 9: Income approach 51 F99 DIN-Germany Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for metrological characteristics 52 H23 DIN-Germany DIN 3193 Loft ladders - Special constructions for ceilings with a high thickness and for an increased maximum total load Ladders 53 H26 DIN-Germany Sealing profiles of expanded PTFE for flanged joints in the gas supply Sealing materials 54 DIN-Germany DIN 3536 Lubricants for gas valves in indoor installation, gas distribution and gas transportation pipe lines 55 H99 DIN-Germany Equipment for commercial kitchens - Refrigeration technology equipment - Part 1: Refrigerators and refrigerated counters; Requirements and testing Equipment for commercial kitchens - Refrigeration technology equipment - Part 2: Cooling tray; requirements and testing Equipment for commercial kitchens - Refrigeration technology equipment - Part 3: Refrigerated display cases for food distribution; requirements and testing Equipment for commercial kitchens - Refrigeration technology equipment - Part 4: Refrigerators and freezers; requirements and testing Equipment for commercial kitchens - Food distribution equipment - Part 2: Heated service counters, requirements and testing Equipment for commercial kitchens - Thermal equipment - Part 1: Warming cupboards - Requirements and testing 61 I01 Screw threads DIN-Germany Geometrical product specifications (GPS) - Screw setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter 62 I02 DIN-Germany Springs - Measuring- and test statistic - Part 1: Cold formed cylindrical tension springs Fasteners 63 DIN Cylindrical head screws with inner contact flange - Part 1: Driving feature 12 point socket 64 DIN Button head screws - Part 1: Driving feature hexalobular socket 65 DIN Button head screws - Part 2: Screws with collar and driving feature hexalobular socket Adjusting rings Internal drive pipe plugs - Conical thread Internal drive screw plugs with collar - Cylindrical thread Hexagon head pipe plugs - Conical thread Hexagon head screw plugs with collar - Cylindrical thread Fasteners - Change of appearance of black surfaces 72 I05 ASI-Austria ÖNORM B 2567 Piles of ductile iron - Dimensions, installation and quality assurance Iron pipes 73 I11 DIN-Germany DIN 950 Handwheels, dished - Hub hole round or straigth square Machine tools 74 DIN 3670 Hand wheels, disc type 75 I13 Gas containers ASI-Austria ÖNORM M 7396 Transportable pressure vessels - Use of gas cylinder bundles
4 76 I17 DIN-Germany Manufacturing processes - Terms and definitions, division Machinery in general (including safety) 77 I18 DIN-Germany Headgears and winding towers for mines - Design loads, calculating- and construction principles Mining 78 I19 ASI-Austria ÖNORM S Medical remote-controlled automatically-driven afterloading systems - Part 2: Constancy testing of functional performance characteristics Nuclear energy 79 ONORM S Dose calibrators - Part 1: Acceptance testing 80 ÖNORM S Medical remote-controlled automatically-driven afterloading systems - Part 3: Rules for testing of radiological protection 81 I31 DIN-Germany DIN Valves - Requirements and tests - Part 1: Protection against corrosion by epoxy coating of coating powders (P) or liquid varnishes (F) Valves 82 DIN Valves - Requirements and tests - Part 2: Protection against corrosion by duromer thick coating 83 M12 ASI-Austria ÖNORM ISO Quality management systems - Guidelines for quality management in projects Aluminium ores 84 M15 Metallic corrosion UNI-Italy UNI Cathodic protection of buried metallic structures - General criteria for the implementation, verification and integration of ISO for cathodic protection systems or galvanic anodes 85 M16 Mechanical tests for metals 86 N03 Petroleum products SIST-Slovenia BS 8571 SIST EN 590:2013+A1:2017/oA101:2 017 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens Automotive fuels - Diesel - Requirements and test methods 87 SIST EN Automotive fuels - Unleaded petrol - Requirements and test methods 228:2012+A1:2017/oA101: ASI-Austria ÖNORM EN 589/A Automotive fuels - LPG - Requirements and test methods (Amendment) 89 SIS-Sweden Fuel oils - Requirements 90 TSE-Turkey Lubricating oils, industrial lubricants and related products (Class L) - Group G: Gear oils - Used in motor vehicles 91 N14 DIN-Germany Coverings for wells, spring water chambers and other water supply construction - Principles for construction Plastics pipes 92 S01 UNI-Italy UNI Internal acoustical characteristics of confined spaces Design methods and evaluation techniques - Part 1: General requirements Acoustics and sound insulation 93 UNI Internal acoustical characteristics of confined spaces Design methods and evaluation techniques - Part 2: Schoo 94 S04 Protective clothing and equipment DIN-Germany DIN Personal fall protection equipment - Rope clamps and webbing clamps - Safety requirements and test methods 95 S08 Air quality 96 S09 Water quality and water supply 97 S18 Sterilization of equipment TSE-Turkey Hygienic air conditioning and ventilation in hospitals preparation of the projects, acceptance of the system, and periodical maintenance DIN-Germany DIN 3506 Water conditioning equipment inside buildings - Stonecatcher with a mesh size of 1,0 mm to 1,5 mm - Requirements of construction and safety UNI-Italy UNI Reconditioning of medical devices - Guidelines for design, development and control of a reprocessing for reusable medical devices (RMD) intended to be used as sterile
5 98 S27 DIN-Germany DIN Leaching of solids - On-site leaching test for determination of mobilizable inorganic fractions Waste - Characterization, treatment and streams 99 MSZT-Hungary MSZ Analysis of sewage sludge. Determination of organic solvent extract 100 S99 ASI-Austria ÖNORM L 1136 Outdoor vertical greening 101 T02 BS 2SP 151- Specification for Unified alloy steel washers. Amendment Aerospace 153:1979/Amd1 102 BS 2SP , BS L 37 (SP 162) and DTD 204 (SP158 and 159) materials. Amendment 163:1979/Amd3 103 BS 4A112:1992/Amd1 Specification for cadmium-plated steel shear bolts (Unified hexagons andunified threads). Amendment 104 BS 2 Amd 3 Specification for 100 countersunk head aluminium alloy bolts (Unified threads) for aircraft. Amendment 105 BS 3A 107:1962/Amd2 Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft. Amendment 106 BS SP 94 Specification for bronze oil-retaining bushes and thrust washers for aircraft 107 T03 SN-Norway NS Firetruck - Functional and technical requirments for fire trucks Road vehicles 108 T16 SN-Norway NS 3807 Evacuation of building using lifts Lifts & escalators 109 T19 SNV-Switzerland prsn Construction sites; Signaling of construction sites on main and secondary roads Road safety 110 U18 ENVIRONMENTAL DIN-Germany DIN VDE Requirements for the preparation for re-use of waste electrical and electronic equipment STANDARDIZATION - GENERAL 111 V02 DIN-Germany Smart Message Language (SML) ELECTRICAL MEASURING EQUIPMENT 112 V21 DIN-Germany Emergency and danger system - Part 11: Emergency service control center ALARM SYSTEMS 113 V24 DIN-Germany DIN VDE Information technology - Generic cabling systems - Part 1: General requirements; Text German and English INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS 114 DIN VDE Information technology - Generic cabling systems - Part 2: Office spaces; Text German and English 115 DIN VDE Information technology - Generic cabling systems - Part 3: Industrial spaces; Text German and English 116 DIN VDE Information technology - Generic cablings systems - Part 4: Homes; Text German and English 117 DIN VDE Information technology - Generic cabling systems - Part 5: Data centre spaces; Text German and English 118 DIN VDE Information technology - Generic cabling systems - Part 6: Distributed building services; Text German and English 119 W04 OVERHEAD ELECTRIC LINES DIN-Germany DIN VDE Fittings for overhead lines - Part 470: Yoke Plate
6 120 W08 ELECTRIC CABLES TSE-Turkey Cables - signal and control cables 121 W23 DIN-Germany Delivery drums for cables and stranded conductors - Part 1: Delivery drums with diameter up to 2800 mm, dimensions WINDING WIRES Machine spools Spools for production of wires - Part 12: Spools with rectangular flanges, technical specifications Spools for production of wires - Part 22: Spools with conical flanges, technical specifications 125 W27 DIN-Germany Low-Voltage electrical installations - Part 8-1: Energy efficiency (IEC 64/2158/CD:2016) ELECTRICAL INSTALLATIONS IN BUILDINGS 126 W33 BS :2016+A1 13 A plugs, socket-outlets, adaptors and connection units. Part 1. Specification for rewirable and non-rewirable 13 A fused plugs. Amendment LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR 127 BS :2016+A1 13 A plugs, socket-outlets, adaptors and connection units. Part 2. Specification for 13 A switched and unswitched socket-outlets. Amendment 128 BS :2016+A1 13 A plugs, socket-outlets, adaptors and connection units. Part 3. Specification for adaptors. Amendment 129 BS :2016+A1 13 A plugs, socket-outlets, adaptors and connection units. Part 4. Specification for 13 A fused connection units switched and unswitched. Amendment 130 W99 UNDETERMINED DIN-Germany Firefighting and fire protection - Hand-operated cable reels - A.C., three-phase A.C. and D.C.
Monthly Notifications Register
Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2017-08-01 to 2017-08-31 Register issued on : 2017-09-01 A list of subsectors can be found at the end of
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2012 Issued on : 02 February 2012 Page 1 Directive 98/34/EC Information
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2018 Issued on : 13 April 2018 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2015 Issued on 4 May 2015 Page 1 Information Procedure on Standards Notifications registered
More informationNEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (August, 2013)
Sector/ Subsector National Standardization Body 1 A09 Facility management 2 A11 Security Services BS 8892 BS 7984-2 Document Transition Management of facility related services Keyholding and response services.
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. August 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC August 2015 Issued on 4 September 2015 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. July 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC July 2017 Issued on : 4 August 2017 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. November 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2017 Issued on : 1 December 2017 Page 1 Information Procedure on Standards Notifications
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2017 Issued on : 2 June 2017 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2016
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2016 Issued on 1 April 2016 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2018 Issued on : 1 June 2018 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2018 Issued on : 16 May 2018 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2015 Issued on : 6 March 2015 Page 1 Information Procedure on Standards Notifications registered
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES BY MEMBERS OF CENELEC
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES BY MEMBERS OF CENELEC 1st Quarter 2008 Issued on: 18 April 2008-2 - Chapter I: Register of new notifications p. 4-7 Chapter II: List
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. October 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC October 2014 Issued on : 07 November 2014 Page 1 Information Procedure on Standards Notifications
More informationNEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (June, 2016)
NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (June, 2016) Sector/ Subsector National Standardization Body Document Title 1 B01 EVS-Estonia prevs 871 Fire
More informationGas meters - Conversion devices - Part 1: Volume conversion
EESTI STANDARD EVS-EN 12405-1:2005 Gas meters - Conversion devices - Part 1: Volume conversion Gas meters - Conversion devices - Part 1: Volume conversion EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2016
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2016 Issued on : 3 June 2016 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2017 Issued on : 3 March 2017 Page 1 Information Procedure on Standards Notifications registered
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 12693:2008 ICS 23.140 27.080 National Standards Authority of Ireland Northwood, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2010 Issued on: 2 December 2010 Chapter I: Register of new notifications
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15311:2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions Thermal spraying - Components with thermally sprayed coatings - Technical supply
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. June 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC June 2014 Issued on : 04 July 2014 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. September 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC September 2015 Issued on : 2 October 2015 Page 1 Information Procedure on Standards Notifications
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2018 Issued on : 7 March 2018 Page 1 Information Procedure on Standards Notifications registered
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15627 December 2007 AGREEMENT ICS 77.040.10 Supersedes CWA 15627:2006 English version Small Punch Test Method for Metallic Materials This CEN Workshop Agreement has been drafted and approved
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2014 Issued on : 04 April 2014 Page 1 Information Procedure on Standards Notifications registered
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC September 2012 Issued on : 08 October 2012 Page 1 Directive 98/34/EC Information
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15596 September 2006 AGREEMENT ICS 67.260 English version Code of Practice on cleanability of commercial food equipment used in the retail and catering sectors This CEN Workshop Agreement
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. January 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2018 Issued on : 16 February 2018 Page 1 Information Procedure on Standards Notifications
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14901:2006 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile iron fittings and accessories (heavy duty) - Requirements and test methods Ductile iron pipes, fittings
More informationMauritian Standards/Amendments Published in 2013
Mauritian Standards/Amendments Published in 2013 Reference Title 2013 Notice No. Date Gazetted 2013 1 R MS 200:2013 Energy efficiency and labelling requirements Household room air conditioners 2 MS 207:2013
More informationNr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
More informationGovernment Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12261:2002 Gas meters -Turbine gas meters Gas meters -Turbine gas meters EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 12261:2002
More informationPortable fire extinguishers - Part 7: Characteristics, performance requirements and test methods KONSOLIDEERITUD TEKST
EESTI STANDARD EVS-EN 3-7:2004+A1:2007 Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods KONSOLIDEERITUD TEKST Portable fire extinguishers - Part 7: Characteristics,
More informationSýnishorn Maintenance - Qualification of maintenance personnel
ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationNEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (December, 2016)
NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (December, 2016) Sector/ Subsector 1 A06 Building and construction services National Title Standardization
More informationΛευκωσία, 27 Δεκεμβρίου Κυρία/ε,
Λευκωσία, 27 Δεκεμβρίου 2017 Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14420-4:2005+A1:2007 Hose fittings with clamp units - Part 4: Flange connections Hose fittings with clamp units - Part 4: Flange connections EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15374 August 2005 AGREEMENT ICS 37.100.01 English version Security Management System for suppliers to secure printing industry This CEN Workshop Agreement has been drafted and approved
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14420-3:2005 Hose fittings with clamp units - Part 3: Clamp units, pinned or bolted Hose fittings with clamp units - Part 3: Clamp units, pinned or bolted EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14470-1:2004 Fire safety storage cabinets - Part 1: Safety storage cabines for flammable liquids Fire safety storage cabinets - Part 1: Safety storage cabines for flammable liquids
More informationSýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts
ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2017 Issued on : 8 May 2017 Page 1 Information Procedure on Standards Notifications registered
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-0 Edition 3.1 2000-06 Edition 3:1998 consolidated with amendment 1:2000 Electrical apparatus for explosive gas atmospheres Part 0: General requirements IEC 2000 Copyright
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationSVENSK STANDARD SS-EN ISO 15065:2005. Fästelement Försänkningar för skruvar med sänkhuvud utformat enligt ISO 7721 (ISO 15065:2005)
SVENSK STANDARD SS-EN ISO 15065:2005 Fastställd 2005-03-18 Utgåva 1 Fästelement Försänkningar för skruvar med sänkhuvud utformat enligt ISO 7721 (ISO 15065:2005) Countersinks for countersunk head screws
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 334:2005 Gaasirõhuregulaatorid sisendrõhule kuni 100 baari Gas pressure regulators for inlet pressures up to 100 bar EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationSýnishorn General requirements for components used in drains and sewers
ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2015 Issued on 3 April 2015 Page 1 Information Procedure on Standards Notifications registered
More informationÍST EN :2013. Gildistaka ICS: 75.2
ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. November 2016
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2016 Issued on : 5 December 2016 Page 1 Information Procedure on Standards Notifications
More informationTissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement Non-destructive testing - Ultrasonic thickness measurement EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 29182-7:2015 - Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines.
More informationEurocode 9 Design of aluminium structures
BRITISH STANDARD Eurocode 9 Design of aluminium structures BS EN 1999-1-2:2007 Incorporating corrigenda December 2008, March 2009 and October 2009 Part 1-2: Structural fire design ICS 91.010.30; 91.080.10;
More informationNEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (May, 2016)
NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CEN/CENELEC (May, 2016) Sector/ Subsector National Standardization Document Title Body 1 A01 Tourist services UNMZ-Czech
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10306:2002 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams EESTI
More informationNotifications over Directive 98/34/ЕС (October, 2011)
Notifications over Directive 98/34/ЕС (October, 2011) Sector/ Subsector National Standardization Body Document Title 1 A99 BSI-United Kingdom BS 8581 Exchanging course related information. Course advertising
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3820:2006 Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-5:2002 Tänavavalgustuspostid. Osa 5: Nõuded terasest tänavavalgustuspostidele Lighting columns - Part 5: Requirements for steel lighting columns EESTI STANDARDIKESKUS EESTI STANDARDI
More informationEESTI STANDARD EVS-EN ISO 14586:2011. Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
EESTI STANDARD EVS-EN ISO 14586:2011 Hexalobular socket countersunk head tapping screws (ISO EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN ISO 14586:2011 sisaldab Euroopa standardi EN ISO 14586:2011
More informationPORTABLE HYDRANT PN10 1A; 2A; 1B; 2B; 1C; 2C TYPES
PORTABLE HYDRANT PN1 1A; 2A; 1B; 2B; 1C; 2C TYPES HP 1 page 1A (type 1) (type 2) In water supply systems for fire extinguishing or other necessities. - Design... in conformity with STAS 698; - Nominal
More informationISO 9152 INTERNATIONAL STANDARD. Aerospace Bolts, with MJ threads, in titanium alloys, strength class MPa Procurement specification
INTERNATIONAL STANDARD ISO 9152 First edition 1998-11-01 Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification Aéronautique et espace Vis à filetage MJ,
More informationAnnex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More informationBitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14704-1:2005 Determination of the elasticity of fabrics - Part 1: Strip tests Determination of the elasticity of fabrics - Part 1: Strip tests EESTI STANDARDIKESKUS EESTI STANDARDI
More informationIEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
More informationILNAS-EN ISO 10684:2004
Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National
More informationSVENSK STANDARD SS-EN ISO 8325:2004. Tandvård Roterande instrument Provningsmetoder. Dentistry Test methods for rotary instruments (ISO 8325:2004)
SVENSK STANDARD SS- Fastställd 2004-09-24 Utgåva 1 Tandvård Roterande instrument Provningsmetoder (ISO 8325:2004) Dentistry Test methods for rotary instruments (ISO 8325:2004) ICS 11.060.20 Språk: engelska
More informationEurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of BS EN masonry 5 BSI
Нотификации по Директива 98/34/ЕС (м. октомври 2006 г.) Национален Заглавие орган по стандартизация Номер на документа SPAIN 1 AENOR PNE 179001 Quality in dental surgeries and dental services - General
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment Non-destructive testing - Ultrasonic testing
More informationTemporary structure - Tents - Safety
Irish Standard I.S. EN 13782:2015 Temporary structure - Tents - Safety CEN 2015 No copying without NSAI permission except as permitted by copyright law. I.S. EN 13782:2015 Incorporating amendments/corrigenda/national
More informationHigh-strength structural bolting assemblies for preloading
BRITISH STANDARD BS EN 14399-5:2005 High-strength structural bolting assemblies for preloading Part 5: Plain washers The European Standard EN 14399-5:2005 has the status of a British Standard ICS 21.060.30
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10664:2005 Hexalobular internal driving feature for bolts and screws Hexalobular internal driving feature for bolts and screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12369-2:2004 Wood-based panels - Characteristic values for structural design - Part 2: Plywwood Wood-based panels - Characteristic values for structural design - Part 2: Plywwood
More informationFree-standing chimneys Part 6: Steel liners Design and execution
SVENSK STANDARD SS-EN 13084-6:2004 Fastställd 2004-12-17 Utgåva 1 Fristående industriskorstenar Del 6: Stålskorstenar Utformning och utförande Free-standing chimneys Part 6: Steel liners Design and execution
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3818:2005 Aerospace series - Bolts, MJ threads, in titanium alloy TIP64001 - Strength class: 1 100 MPa (at ambient temperature) - Technical specification Aerospace series - Bolts,
More informationHEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13411-5:2003 Terastraadist trosside otsmuhvid. Ohutus. Osa 5: Vedrukammitsaga terastrosshaaratsid Terminations for steel wire ropes - Safety - Part 5: U- bolt wire rope grips EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3848:2002 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations Aerospace series - Semi-finished metallic products - Methods of measuring form
More informationCONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES 1 Hair Dryers 8516.31 MS IEC 60335-2-23 Household and similar electrical appliances-
More informationBSOL Modules EC Directives
BSOL Modules EC Directives Module Title 90-396-EEC 94-9-EC 00-9-EC 89-106-EEC 89-339-EEC 93-15-EEC 95-16-EC 73-23-EEC Appliance Burning Equipment & Protective Cableway Installations Construction Electromagnetic
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12215:2005 Pindamisseadmed. Pihustuskambrid orgaaniliste vedelate kattematerjalide pealekandmiseks. Ohutusnõuded Coating plants - Spray booths for application of organic liquid coating
More informationTermometrar med visare
SVENSK STANDARD SS-EN 13190 Fastställd 2001-11-30 Utgåva 1 Termometrar med visare Dial thermometers ICS 01.040.17; 71.200.20 Språk: engelska Tryckt i januari 2002 Copyright SIS. Reproduction in any form
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 14960-1 January 2019 ICS 97.190; 97.200.50 Will supersede EN 14960:2013 English Version Inflatable play equipment - Part 1: Safety
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1004:2005 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements Mobile access and working towers
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50326:2003 Conductors for overhead lines - Characteristics of greases Conductors for overhead lines - Characteristics of greases EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 1580:2011 Slotted pan head screws - Product grade A (ISO EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN ISO 1580:2011 sisaldab Euroopa standardi EN ISO
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12899-2:2007 Vertikaalsed püsiliikluskorraldusvahendid. Osa 2: Seest valgustatavad piirdetulbad Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14972 May 2008 ICS 13.220.20 English Version Fixed firefighting systems - Watermist systems - Design and installation Installations
More informationLOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES IRISH STANDARD I.S. EN :
IRISH STANDARD I.S. ICS 53.080 55.180.99 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15193:2007 Energy performance of buildings - Energy requirements for lighting Energy performance of buildings - Energy requirements for lighting EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16792 December 2014 ICS 61.020; 97.190 English Version Safety of children's clothing - Recommendations for the design and manufacture of children's
More information