Monthly Notifications Register

Transcription

1 Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from to Register issued on : A list of subsectors can be found at the end of this document.

2 Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from to Sector A : SERVICES Register issued on :

3 Subsector A09: FACILITY MANAGEMENT Page 3 Subsector : A09 Registration Date : SN Norway ID : NOT17032/ National Ref : NS 6460 Operation of technical building installations This standard is a tool to increase the skills of the operating staff of technical building installations, and point to laws and regulations. It points out different "dynamic" operational goals - how to achieve them and how to achieve continuous improvement. This standard point out some of the goals to be achieved, or any other potential that may be focused on. It describes how energy performance in a building can be developed, e.g. using NS-EN It also define/describe environmental goals and management as well as energy goals and management. Subsector A11: SAFETY AND SECURITY Subsector : A11 Registration Date : TSE Turkey ID : t / National Ref : Work place - Rules for compressed natural gaz (CNG) filling plants This standard structural features of CNG filling stations, management includes rules regarding the characteristics and safety of employees. Subsector A99: UNDETERMINED Subsector : A99 Registration Date : UNI Italy ID : / National Ref : UNI Personal financial planning - Guideline for the application of UNI ISO 22222: Part 1: Terminology, classification and requirements of service for planners This standard specifies criteria upon which personal financial planners, with suitable professional competence, supports the clients in the definition and achievement of planned life objectives, respecting needs, obligations and preferences of the client

4 Page 4 REV/AMD UNI/TS 11348:2010 ** End of Sector **

5 Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from to Sector B : BUILG AND CONSTRUCTION Register issued on :

6 Subsector B01: FIRE PROTECTION Page 6 Subsector : B01 Registration Date : ASI Austria ID : / , National Ref : ÖNORM F 3700 Fire protection systems - General This ÖNORM defines the requirements for specialist companies for the planning, design, installation, commissioning and maintenance of fire protection systems such as fire detection systems and fire incident control systems; gas extinguishing systems; wet extinguishing systems, fire prevention systems using an oxygen reduced atmosphere; electro acoustical alerting systems; Smoke and heat extraction systems (RWA) and alarm transmission systems. Subsector : B01 Registration Date : ASI Austria ID : / National Ref : ÖNORM F 3072 Maintenance of wet extinguishing systems This ÖNORM defines the maintenance of water extinguishing, spray water and foam extinguishing systems up to a nominal pressure of 25,0 bar as well as controls directly connected with certain types of water extinguishing systems. In addition to ÖNORM EN 12845, which is limited to sprinkler systems, this ÖNORM is to be applied to the entire range of wet extinguishing systems. Target of this ÖNORM is to define the tasks of the involved experts. Subsector : B01 Registration Date : ASI Austria ID : / National Ref : ÖNORM F 3073 Maintenance of fire prevention systems using an oxygen reduced atmosphere This ÖNORM defines the maintenance of fire prevention systems using an oxygen reduced atmosphere. Target of this ÖNORM is to define the tasks of the involved experts. Subsector : B01 Registration Date :

7 Page 7 NEN Netherlands ID : / , National Ref : NEN :2012/A2:2017 Concept nl Fire safety of buildings - Evacuation alarm installations - System and quality requirements and guidelines for locating of alarm devices - Part 3: Loud alarm evacuation alarm installation type B RThis document contains amendments of NEN :2012. Subsector B02: STRUCTURES Subsector : B02 Registration Date : ID : / National Ref : Components for enclosures made of textile fabrics and plastic films (awnings) - Part 1: Structures and tents Subsector : B02 Registration Date : ID : / National Ref : Components for enclosures made of textile fabrics and plastic films (awnings) - Part 101: Conformity accessment for tents and halls according to Subsector B10: TIMBER STRUCTURES Subsector : B10 Registration Date : SIST Draft Issue Date : Slovenia Latest Date for Comments : ID : / , National Ref : SIST EN :2005/oA102:2017 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for

8 Page 8 buildings - National Annex Standard SIST EN :2005 gives general rules applicable to timber structures. National annex determines the values for national choice through clauses where they are allowed. Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY Subsector : B17 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : ID : CH170015/0001 Draft for public enquiry National Ref : prsn Public lighting in street tunnels, galleries and underpasses - Part 1: Lighting requirements, terms and quality features Subsector : B17 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : ID : CH170016/0001 Draft for public enquiry National Ref : prsn Public lighting in street tunnels, galleries and underpasses - Part 2: Planning and design of the lighting installation Subsector : B17 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : ID : CH170017/0001 Draft for public enquiry National Ref : prsn Public lighting in street tunnels, galleries and underpasses - Part 3: Method for measuring and evaluating quality features Subsector B20: DRAINAGE EQUIPMENT Subsector : B20 Registration Date :

9 UNI Italy ID : / National Ref : UNI Guideline for the installation for gully tops and manhole tops for pedestrian and/or vehicular areas This standard specifies the indications for the installation for gully tops and manhole tops, within vehicular and pedestrian areas. REV/AMD UNI/TR 11256:2007 Page 9 Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : UNI Italy ID : / National Ref : UNI Gasmeasurementsystems Hourlybasedgasmeteringsystems InterchangeabilityofmeterswithQmax 10m3/hwithpointtopointcommunication-Part 12-2:Datamodel This technical specification completes the requirements, already specified in the relevant parts of UNI/TS series, in order to allow interchangeability of gas meters designed for mass-market(<g10)thatcommunicateinpointtopointmode. This Part 12-2 defines the subset of the data model specified for interchangeability with exclusion of objects needed to manage the transmission media Subsector : B25 Registration Date : UNI Italy ID : / National Ref : UNI Gasmeasurementsystems Hourlybasedgasmeteringsystems InterchangeabilityofmeterswithQmax 10m3/hwithpointtopointcommunicationPart 12-4: PP4 Communication profile This technical specification completes the requirements, already specified in the relevant parts of UNI/TS series, in order to allow interchangeability of gas meters designed for mass-market(<g10)thatcommunicateinpointtopointmode. Part 12-4 defines the objects needed for the management of the transmission media and statemachinesforcommunicationmanagement.

10 Page 10 Subsector : B25 Registration Date : UNI Italy ID : / National Ref : UNI Gasmeasurementsystems Hourlybasedgasmeteringsystems InterchangeabilityofmeterswithQmax 10m3/hwithpointtopointcommunicationPart 12-6: Specifications for conformity assessment This technical specification completes the requirements, already specified in the relevant parts of UNI/TS series, in order to allow interchangeability of gas meters designed for mass-market(<g10)thatcommunicateinpointtopointmode. This Part 12-6 defines a common pattern for conformity assessment Subsector B26: ROAD BUILG AND MAINTENANCE Subsector : B26 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 1707 Roadsurfacedressing,bondcoats,seals,preservativesandothersprays Specificationforthemethodoftestforbindersprayersforaccuracyofspreadofbinder (spray bar bench test) Subsector B28: FLOOR COVERINGS Subsector : B28 Registration Date : ASI Austria ID : / National Ref : ÖNORM B 5236 Planing and Laying of floor coverings This Austrian Standard specifies floor covering works with textile, elastic and laminate floor coverings for internal use, also connected to installation of hot water underfloor heating systems. Parquets and timber floors are not covered by this Standard; these are dealt with by

11 Page 11 ÖBORMB2218andÖNORMBxx18. This Austrian Standard does not include provisions for bonding of wall coverings, for which particular requirements apply. Subsector B33: BUILG DESIGN Subsector : B33 Registration Date : MSZT Hungary ID : /0001 National Ref : MSZ Siting in nature areas. Design Plans intended to demonstrate integration into nature areas. Detailed specifications of siting plans Subsector : B33 (Secondary Subsector) Registration Date : MSZT Hungary ID : /0001 National Ref : MSZ Siting in nature areas. Design Plans intended to demonstrate integration into nature areas. Detailed specifications of siting plans Subsector B99: UNDETERMINED Subsector : B99 Registration Date : ASI Austria ID : / , National Ref : ÖNORM B Real estate evaluation - Principles This Austrian Standard is applicable to the calculation of values of the value of developed and undeveloped real estate and parts of real estates, including parts such as buildings and outdoor facilities, as well as of building leases.

12 Page 12 Subsector : B99 Registration Date : ASI Austria ID : / National Ref : ÖNORM B 2204 Execution of vertical components - Contract to provide services This Austrian Standard includes procedural and contractual provisions for the execution of ofverticalcomponents. Exceptions are underground works in accordance with ÖNORM B 2203 (all parts), special civil engineering works according to ÖNORM B Subsector : B99 Registration Date : UNI Italy ID : /0001 National Ref : UNI Building and civil engineering works Digital management of the informative processes Part 9: Informative management in working stage (Collaborative Digital Platform, Building Paper) The standard defines the general criteria for the management of digital information during the use of the built environment (buildings, infrastructures and anthropomorphic environment). Moreindetail,thestandarddefinestheoperationalcriteriaof: - definition and acquisition of all the data needed to know the built environment (Digital DueDiligence) -coordination/organization,holdingandupdatingofthe CollaborativeDigitalPlatform - definition of the building logbook as a data management tool for existing building. ** End of Sector **

13 Information procedure Page 13 Monthly Notifications Register Notifications registered at CCMC from to Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on :

14 Subsector C01: Food products Page 14 Subsector : C01 Registration Date : LST Lithuania ID : / National Ref : Grain products. Groats and flakes This Lithuanian Standard specifies requirements for groats and flakes supplied to the wholesale and retail trade. Subsector : C01 Registration Date : MSZT Hungary ID : / , National Ref : MSZ Beer. Sensory analysis REV/AMD MSZ :1995 Subsector : C01 (Secondary Subsector) MSZT Hungary ID : / , National Ref : MSZ Beer. Sensory analysis Registration Date : REV/AMD MSZ :1995 Subsector : C01 Registration Date : MSZT Hungary ID : / , National Ref : MSZ Test methods for bakery products. Sensory analysis. Qualification on points REV/AMD MSZ :1989

15 Page 15 Subsector : C01 (Secondary Subsector) Registration Date : MSZT Hungary ID : / , National Ref : MSZ Test methods for bakery products. Sensory analysis. Qualification on points REV/AMD MSZ :1989 Subsector : C01 Registration Date : MSZT Hungary ID : / , National Ref : MSZ Sensory analysis of meat products. Part 1: Salami and sausages REV/AMD MSZ :1989 Subsector : C01 (Secondary Subsector) MSZT Hungary ID : /0001 Registration Date : , National Ref : MSZ Sensory analysis of meat products. Part 1: Salami and sausages REV/AMD MSZ :1989 Subsector : C01 Registration Date : MSZT Hungary ID : / , National Ref : MSZ Sensory analysis of meat products. Part 2: Cold cuts REV/AMD MSZ :1989 Subsector : C01 (Secondary Subsector) Registration Date :

16 Page 16 MSZT Hungary ID : / , National Ref : MSZ Sensory analysis of meat products. Part 2: Cold cuts REV/AMD MSZ :1989 Subsector : C01 Registration Date : MSZT Hungary ID : / , National Ref : MSZ Sensory analysis of meat products. Part 3: Parisers, frankfurter, crinoline REV/AMD MSZ :1989 Subsector : C01 (Secondary Subsector) Registration Date : MSZT Hungary ID : / , National Ref : MSZ Sensory analysis of meat products. Part 3: Parisers, frankfurter, crinoline REV/AMD MSZ :1989 Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : C02 Registration Date : ID : / National Ref : Colouring materials - Conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics

17 Page 17 Subsector : C02 Registration Date : ID : / National Ref : Pigments and extenders - Determination of lightness of extenders and white pigments in powder form Subsector C04: LABORATORY GLASSWARE Subsector : C04 Registration Date : ID : /0001 National Ref : Laboratory glassware; laboratory thermometers, scale values 0,1 C, 0,2 C and 0,5 C Subsector : C04 Registration Date : ID : /0001 National Ref : Laboratory glassware - Anschütz thermometer set Subsector : C04 Registration Date : ID : /0001 National Ref : Laboratory glassware - laboratory thermometers, smallest scale division 1 C and 2 C

18 Page 18 Subsector : C04 Registration Date : ID : /0001 National Ref : Laboratory glassware - solid stem general purpose thermometers Subsector : C04 Registration Date : ID : /0001 National Ref : Laboratory glassware - Density hydrometers - Part 1: General requirements Subsector : C04 Registration Date : ID : /0001 National Ref : Laboratory glassware - hydrometers, principles of construction and adjustment ** End of Sector **

19 Information procedure Page 19 Monthly Notifications Register Notifications registered at CCMC from to Sector F : FUNDAMENTAL STANDARDS Register issued on :

20 Subsector F05: MEASURING INSTRUMENTS Page 20 Subsector : F05 Registration Date : EVS Estonia ID : / , National Ref : prevs 912 Non-automatic weighing instruments - Verification procedure The scope of this Estonian Standard is verification of non-automatic weighing instruments which comply to international requirements and are subject of verification in Estonia by verification authority. Standard sets requirements for equipment, verification procedure and principles of conformity decision making in compliance with relevant international normative acts. Subsector : F05 Registration Date : EVS Estonia ID : / , National Ref : prevs 913 Fuel dispensers - Verification procedure The scope of this Estonian Standard is verification of fuel dispensers which comply to international requirements and are subject of verification in Estonia by verification authority. Standard sets requirements for equipment, verification procedure and principles of conformity decision making in compliance with relevant international normative acts. Subsector : F05 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : BS 8499:2017 Specification for domestic gas meter boxes and meter bracket Subsector F15: MATERIAL TESTING IN GENERAL Subsector : F15 Registration Date : ASI Austria

21 Page 21 ID : / , National Ref : ÖNORM M 3041 Training of personnel carrying out non-destructive testing (NDT personnel) This ÖNORM establishes a standardized system for the training of NDT personnel. It defines the levels of competence of NDT personnel according to ÖNORM EN ISO 9712, UIC-Kodex 960 V, ÖNORM EN 4179 und NAS 410 as well as the level of training required for this purpose and the required knowledge and skills. The standardized and organized training of NDT personnel creates a basis for a successful access to examinations and certifications in accordance with ÖNORM EN ISO 9712, UIC-Kodex 960 V, ÖNORM EN 4179 und NAS 410. This ÖNORM deals with qualification as far as organized training at a recognized training centre and in-house-training is concerned. Depending on the requirements to be met by NDT personnel, this ÖNORM shall apply to NDT levels 1, 2 and 3. Subsector : F15 Registration Date : ID : /0001 National Ref : ph-measurement - ph-measurement of aqueous solutions with ph combination electrodes with ph glass electrodes and evaluation of measurement uncertainty Subsector F16: GRAPHICAL SYMBOLS Subsector : F16 Registration Date : ID : /0001 National Ref : Printing technology - Type sizes - Part 2: Digital typesetting and related techniques Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date : ASI Austria ID : /0001

22 National Ref : ÖNORM ISO Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations This International Standard provides guidance for planning, designing, developing, implementing, maintaining and improving customer satisfaction codes of conduct. This International Standard is applicable to productrelated codes containing promises made to customers by an organization concerning its behaviour. Such promises and related provisions are aimed at enhanced customer satisfaction. Annex A provides simplified examples of components of codes for different organizations. Page 22 Subsector : F20 Registration Date : ASI Austria ID : / National Ref : ÖNORM ISO Quality management systems - Customer satisfaction - Guidelines for complaints handling in organizations This International Standard provides guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance, and improvement. The complaints-handling process described is suitable for use as one of the processes of an overall quality management system. This International Standard is not applicable to disputes referred for resolution outside the organization or for employmentrelated disputes. It is also intended for use by organizations of all sizes and in all sectors. Annex A provides guidance specifically for small businesses. This International Standard addresses the following aspects of complaints handling: a) enhancing customer satisfaction by creating a customer-focused environment that is open to feedback (including complaints), resolving any complaints received, and enhancing the organization's ability to improve its product and customer service; b) top management involvement and commitment through adequate acquisition and deployment of resources, including personnel training; c) recognizing and addressing the needs and expectations of complainants; d) providing complainants with an open, effective, and easy-to-use complaints process; e) analysing and evaluating complaints in order to improve the product and customer service quality; f) auditing of the complaints-handling process; g) reviewing the effectiveness and efficiency of the complaints-handling process. Subsector : F20 Registration Date : ASI Austria ID : / National Ref : ÖNORM ISO Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations

23 Page 23 This International Standard provides guidance for an organization to plan, design, develop, operate, maintain and improve an effective and efficient dispute-resolution process for complaints that have not been resolved by the organization. This International Standard is applicable to: - complaints relating to the organization s products intended for, or required by, customers, the complaintshandling process or dispute-resolution process - resolution of disputes arising from domestic or cross-border business activities, including those arising from electronic commerce. This International Standard is intended for use by organizations regardless of type, size and product provided, and deals with - guidance on determining when and how organizations can participate in dispute resolution, - guidance on the selection of providers and use of their services, - top management involvement in, and commitment to, dispute resolution and deployment of adequate resources within the organization, - the essentials for fair, suitable, transparent and accessible dispute resolution, - guidance on management of an organization s participation in dispute resolution, and - monitoring, evaluating and improving the dispute-resolution process. Subsector : F20 Registration Date : ASI Austria ID : / National Ref : ÖNORM ISO Quality management - Customer satisfaction - Guidelines for monitoring and measuring This International Standard provides guidance in defining and implementing processes to monitor and measure customer satisfaction. This International Standard is intended for use by organizations regardless of type, size or product provided. The focus of this International Standard is on customers external to the organization Subsector : F20 Registration Date : ASI Austria ID : / , National Ref : ÖNORM ISO 21503, programme and portfolio management - Guidance on programme management This International Standard provides guidance for programme management. This International Standard is applicable to any type of organisation including public or private and any size organisation or sector, as well as any type of programme in terms of complexity, size or duration. This International Standard provides high-level descriptions of relevant terms, definitions, concepts, prerequisites and practices, including roles and responsibilities that form good practice in programme management. It does not provide guidance on processes, methods and tools.

24 Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK Page 24 Subsector : F21 Registration Date : EVS Estonia ID : / , , , National Ref : prevs Property valuation - Part 8: Cost approach The standard series EVS 875 applies to property valuation. These standards are to be used for valuation activitises and using valuations. The users of these standards are real estate specialists, construction specialists, environment specialists, financial reporting specialists (accountants, auditors), credit institutions, higher edukation institutions. These standards create a basis for unified approach to property valuation, satisfying the needs of private and public sector. EVS "Property valuation - Part 8: Cost approach" gives the objectives and possibilities of using the cost approach and covers the valuation of land and buildings. Subsector : F21 Registration Date : EVS Estonia ID : / , , , National Ref : prevs Property valuation - Part 9: Income Approach The series EVS 875 applies to property valuation. These standards are to be used for valuation activities and for use of valuations. The users of these standards are real estate specialists, construction specialists, environment specialists, financial reporting specialists (accountants, auditors), credit institutions, higher education institutions. These standards create a basis for unified approach to property valuation, satisfying the needs of both the private and public sector. EVS covers the usage of income approach when finding the market value, the value in use and the investment value and investment analysis. Subsector F99: UNDETERMINED Subsector : F99 Registration Date : ID : /0001 National Ref : Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for

25 metrological characteristics Page 25 ** End of Sector **

26 Information procedure Page 26 Monthly Notifications Register Notifications registered at CCMC from to Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on :

27 Subsector H23: LADDERS Page 27 Subsector : H23 Registration Date : ID : / National Ref : 3193 Loft ladders - Special constructions for ceilings with a high thickness and for an increased maximum total load Subsector H26: SEALING MATERIALS Subsector : H26 Registration Date : ID : /0001 National Ref : Sealing profiles of expanded PTFE for flanged joints in the gas supply Subsector : H26 Registration Date : ID : / National Ref : 3536 Lubricants for gas valves in indoor installation, gas distribution and gas transportation pipe lines Subsector H99: UNDETERMINED Subsector : H99 Registration Date : ID : /0001 National Ref : Equipment for commercial kitchens - Refrigeration technology equipment - Part 1:

28 Refrigerators and refrigerated counters; Requirements and testing Page 28 Subsector : H99 Registration Date : ID : /0001 National Ref : Equipment for commercial kitchens - Refrigeration technology equipment - Part 2: Cooling tray; Requirements and testing Subsector : H99 Registration Date : ID : /0001 National Ref : Equipment for commercial kitchens - Refrigeration technology equipment - Part 3: Refrigerated display cases for food distribution; requirements and testing Subsector : H99 Registration Date : ID : /0001 National Ref : Equipment for commercial kitchens - Refrigeration technology equipment - Part 4: Refrigerators and freezers; Requirements and testing Subsector : H99 Registration Date : ID : /0001 National Ref : Equipment for commercial kitchens - Food distribution equipment - Part 2: Heated service counters, Requirements and testing

29 Page 29 Subsector : H99 Registration Date : ID : /0001 National Ref : Equipment for commercial kitchens - Thermal equipment - Part 1: Warming cupboards - Requirements and testing ** End of Sector **

30 Information procedure Page 30 Monthly Notifications Register Notifications registered at CCMC from to Sector I : MECHANICAL ENGINEERING Register issued on :

31 Subsector I01: SCREW THREADS Page 31 Subsector : I01 Registration Date : ID : /0001 National Ref : Geometrical product specifications (GPS) - Screw setting gauges for measuring instruments for ISO metric screw threads; setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter Subsector I02: FASTENERS Subsector : I02 Registration Date : ID : /0001 National Ref : Springs - Measuring- and test statistic - Part 1: Cold formed cylindrical tension springs Subsector : I02 Registration Date : ID : / National Ref : Cylindrical head screws with inner contact flange - Part 1: Driving feature 12 point socket Subsector : I02 Registration Date : ID : / National Ref : Button head screws - Part 1: Driving feature hexalobular socket

32 Page 32 Subsector : I02 Registration Date : ID : / National Ref : Button head screws - Part 2: Screws with collar and driving feature hexalobular socket Subsector : I02 Registration Date : ID : /0001 National Ref : Adjusting rings Subsector : I02 Registration Date : ID : /0001 National Ref : Internal drive pipe plugs - Conical thread Subsector : I02 Registration Date : ID : /0001 National Ref : Internal drive screw plugs with collar - Cylindrical thread Subsector : I02 Registration Date :

33 Page 33 ID : /0001 National Ref : Hexagon head pipe plugs - Conical thread Subsector : I02 Registration Date : ID : /0001 National Ref : Hexagon head screw plugs with collar - Cylindrical thread Subsector : I02 Registration Date : ID : /0001 National Ref : Fasteners - Change of appearance of black surfaces Subsector I05: IRON PIPES Subsector : I05 Registration Date : ASI Austria ID : / National Ref : ÖNORM B 2567 Piles of ductile iron - Dimensions, installation and quality assurance This ÖNORM sets forth the implementation characteristics, installation instructions, structural conditions and quality assurance for piles made of ductile cast iron. The pile is used as a foundation element in structural engineering, civil engineering, industrial construction, pipeline construction, bridge construction and special applications. Examples here to are shown in Annex A.

34 Page 34 Subsector I11: MACHINE TOOLS Subsector : I11 Registration Date : ID : / National Ref : 950 Handwheels, dished - Hub hole round or straigth square Subsector : I11 Registration Date : ID : / National Ref : 3670 Hand wheels, disc type Subsector I13: GAS CONTAINERS Subsector : I13 Registration Date : ASI Austria ID : / National Ref : ÖNORM M 7396 Transportable pressure vessels - Use of gas cylinder bundles This Austrian Standard is applicable to the operation of cylinder bundles for compressed and liquefiedgasesandacetylene. For the transport of cylinder bundles, the relevant provisions for the transport of dangerous goods (e.g. ADR/RID), implemented in Austria by the Law on transport of dangerous goods - GGBG, BGBl. I Nr. 145/1998 as amended by BGBl. I Nr. 91/2013, shall be observed. Subsector I17: MACHINERY IN GENERAL (INCLUG SAFETY)

35 Page 35 Subsector : I17 Registration Date : ID : /0001 National Ref : Manufacturing processes - Terms and definitions, division Subsector I18: MINING Subsector : I18 Registration Date : ID : /0001 National Ref : Headgears and winding towers for mines - Design loads, calculating- and construction principles Subsector I19: NUCLEAR ENERGY Subsector : I19 Registration Date : ASI Austria ID : / National Ref : ÖNORM S Medical remote-controlled automatically-driven afterloading systems - Part 2: Constancy testing of functional performance characteristics This ÖNORM specifies the extent and execution of constancy testing of functional performance characteristics of medical remote-controlled automatically-driven afterloading Systems. Subsector : I19 Registration Date : ASI Austria ID : / ,

36 Page 36 National Ref : ONORM S Dose calibrators - Part 1: Acceptance testing This ÖNORM specifies the Implementation of acceptance testing of dose calibrators on site. The ÖNORM contains parts of ÖNORM EN "Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance" that have to be considered for acceptance testing according Austrian "MedStrSchV". Subsector : I19 Registration Date : ASI Austria ID : / National Ref : ÖNORM S Medical remote-controlled automatically-driven afterloading systems - Part 3: Rules for testing of radiological protection This ÖNORM specifies the rules for testing of radiological protection for permission procedure according "StrSchG" Subsector I31: VALVES Subsector : I31 Registration Date : ID : / National Ref : Valves - Requirements and tests - Part 1: Protection against corrosion by epoxy coating of coating powders (P) or liquid varnishes (F) Subsector : I31 Registration Date : ID : /0001 Splitting National Ref : Valves - Requirements and tests - Part 2: Protection against corrosion by duromer thick coating

37 ** End of Sector ** Page 37

38 Information procedure Page 38 Monthly Notifications Register Notifications registered at CCMC from to Sector M : METALLIC MATERIALS Register issued on :

39 Subsector M12: ALUMINIUM ORES Page 39 Subsector : M12 Registration Date : ASI Austria ID : / , National Ref : ÖNORM ISO Quality management systems - Guidelines for quality management in projects This document gives guidance on the application of quality management in projects. It applies to organizations working on projects of varying complexity, small or large, of short or long duration, being an individual project to being part of a programme or portfolio of projects, in different environments, and irrespective of the kind of product/service or process involved, with the intention of satisfying project interested parties (stakeholders) by introducing quality management in projects. This can necessitate some tailoring of the guidance to suit a particular project. Subsector M15: METALLIC CORROSION Subsector : M15 Registration Date : UNI Italy ID : / , National Ref : UNI Cathodic protection of buried metallic structures - General criteria for the implementation, verification and integration of ISO for cathodic protection systems or galvanic anodes. The standard defines the annual programming of cathodic protection measures to be applied to current-operated systems or galvanic-anode systems, with the aim of monitoring theeffectivenessofcathodicprotectioninaccordancewithiso The standard does not apply to cathodic protection systems of concrete reinforcement, nor toofcomplexstructuresinaccordancewithunien REV/AMD UNI 11094:2004 Subsector M16: MECHANICAL TESTS FOR METALS Subsector : M16 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 8571 Methodoftestfordeterminationoffracturetoughnessinmetallicmaterials using single edge notched tension (SENT) specimens

40 Page 40 ** End of Sector **

41 Information procedure Page 41 Monthly Notifications Register Notifications registered at CCMC from to Sector N : NON-METALLIC MATERIALS Register issued on :

42 Subsector N03: PETROLEUM PRODUCTS Page 42 Subsector : N03 Registration Date : SIST Draft Issue Date : Slovenia Latest Date for Comments : ID : / , National Ref : SIST EN 590:2013+A1:2017/oA101:2017 Automotive fuels - Diesel - Requirements and test methods The document specifies sampling procedures, compulsory equipping of diesel distribution appliances with information plates or labels and requirements based on climate conditions in Slovenia. Subsector : N03 Registration Date : SIST Draft Issue Date : Slovenia Latest Date for Comments : ID : / , National Ref : SIST EN 228:2012+A1:2017/oA101:2017 Automotive fuels - Unleaded petrol - Requirements and test methods The document specifies sampling procedures, compulsory equipping of unleaded petrol distribution appliances with information plates or labels, what are requirements of knock characteristics of unleaded petrol and requirements for evaporation behaviour in Slovenia. Subsector : N03 Registration Date : ASI Austria ID : / National Ref : ÖNORM EN 589/A Automotive fuels - LPG - Requirements and test methods (Amendment) Adaptation of the national Annex to the requirements laid down in the EN standard, which are to be defined by a national Annex required by the EN standard. Subsector : N03 Registration Date : SIS Draft Issue Date : Sweden Latest Date for Comments : ID : / National Ref :

43 Fuel oils - Requirements Page 43 This standard includes requirements for fuel oils based on distillate (Eo1, Eo2 and Eo3A) as well as residual fuel oils (Eo3B, Eo4, Eo5, Eo6). If fuel oil is used for other purposes than heating, additional requirements have to be considered. These requirements are not stated in this standard. Subsector : N03 Registration Date : TSE Turkey ID : tst11485/ National Ref : Lubricating oils, industrial lubricants and related products (Class L) - Group G: Gear oils - Used in motor vehicles This standard specifies requirements and test methodsfor gear oils used im motor vehicles. Subsector N14: PLASTICS PIPES Subsector : N14 Registration Date : ID : /0001 National Ref : Coverings for wells, spring water chambers and other water supply construction - Principles for construction ** End of Sector **

44 Information procedure Page 44 Monthly Notifications Register Notifications registered at CCMC from to Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on :

45 Subsector S01: ACOUSTICS AND SOUND INSULATION Page 45 Subsector : S01 Registration Date : UNI Italy ID : / National Ref : UNI Internal acoustical characteristics of confined spaces Design methods and evaluation techniques - Part 1: General requirements The standard describes general aspects common to all areas of application, in details it includes descriptors suitable to represent the room acoustical qualities with relation to the intendeduseoftheroom,referencevalues,specificpredictingandverificationmethods Thestandardisdedicatedtodifferentdestinationssuchas: 1) school - communication / collective - collective - small conference rooms and / or multifunctionalwithalimitof250m³; 2)healthsector/o; 3)Offices,withparticularregardtoopenplanoffices 4)restaurantsector; 5)commercial-sporting-tertiarymanagementsector; 6)production/industrialsector-fair-exhibition. REV/AMD UNI 11532:2014 Subsector : S01 Registration Date : UNI Italy ID : / National Ref : UNI Internal acoustical characteristics of confined spaces Design methods and evaluation techniques - Part 2: Schoo The standard defines the acoustic descriptors suitable to represent the acoustic quality, and reference values for the school - communicative / collective - collective - small conference and/orpolyfunctionalconferencerooms. For the prediction methods and the evaluation techniques, please refer to Part 1 of this Standard. REV/AMD UNI 11532:2014 Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT Subsector : S04 Registration Date : ID : /0001

46 Page National Ref : Personal fall protection equipment - Rope clamps and webbing clamps - Safety requirements and test methods Subsector S08: AIR QUALITY Subsector : S08 Registration Date : TSE Turkey ID : tst59161/ National Ref : HYGIENIC AIR CONDITIONING AND VENTILATION IN HOSPITALS - PREPARATION OF THE PROJECTS, ACCEPTANCE OF THE SYSTEM, AND PERIODICAL MAINTENANCE This standard covers requirements for preparation of the projects, system acceptance and periodical maintenance of hygienic air conditioning and ventilation systems in hospitals Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : S09 Registration Date : ID : / National Ref : 3506 Water conditioning equipment inside buildings - Stonecatcher with a mesh size of 1,0 mm to 1,5 mm - Requirements of construction and safety Subsector S18: STERILIZATION OF EQUIPMENT Subsector : S18 Registration Date : UNI Italy ID : / National Ref : UNI Reconditioning of medical devices - Guidelines for design, development and control of a

47 reprocessingforreusablemedicaldevices(rmd)intendedtobeusedassterile. The Technical Report give guidelines for design, development, control and efficacy evaluation of any single phase and of the entire re-process of reusable medical devices intendedtobeusedassterile. The document also includes organizational criteria concerning: responsibilities, environments, maintenance, routine controls, validation, documents, process review and traceability. Thesterilizationprocessesdescribedinthisdocumentare: -Saturatedsteamsterilizationwithforcedairremoval, -Vaporizedhydrogenperoxidewithorwithoutplasma, -Lowtemperaturesteamandformaldehyde, -ethyleneoxide. TheTechnicalReportdoesnotspecifysafetyandprotectionrequirementsforoperators. Page 47 REV/AMD UNI/TR 11408:2011 Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS Subsector : S27 Registration Date : ID : / National Ref : Leaching of solids - On-site leaching test for determination of mobilizable inorganic fractions Subsector : S27 Registration Date : MSZT Hungary ID : / National Ref : MSZ Analysis of sewage sludge. Determination of organic solvent extract REV/AMD MSZ 318-6:1979 Subsector : S27 (Secondary Subsector) MSZT Hungary ID : / Registration Date :

48 Page 48 National Ref : MSZ Analysis of sewage sludge. Determination of organic solvent extract REV/AMD MSZ 318-6:1979 Subsector S99: UNDETERMINED Subsector : S99 Registration Date : ASI Austria ID : / , , National Ref : ÖNORM L 1136 Outdoor vertical greening The present ÖNORM is to be used for planning, installation and maintenance of enduring outdoor greening on vertical surfaces with or without ground connection. ** End of Sector **

49 Information procedure Page 49 Monthly Notifications Register Notifications registered at CCMC from to Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on :

50 Subsector T02: AEROSPACE Page 50 Subsector : T02 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 2SP :1979/Amd1 Specification for Unified alloy steel washers. Amendment Subsector : T02 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 2SP :1979/Amd3 161),BSL37(SP162)andDTD204(SP158and159)materials. Amendment Subsector : T02 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 4A112:1992/Amd1 Specificationforcadmium-platedsteelshearbolts(UnifiedhexagonsandUnified threads). Amendment Subsector : T02 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 2 Amd 3 Specificationfor100countersunkheadaluminiumalloybolts(Unifiedthreads) for aircraft. Amendment

51 Page 51 Subsector : T02 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 3A 107:1962/Amd2 Specificationforaluminiumalloynuts(UnifiedhexagonsandUnifiedthreads) (ordinary and slotted) for aircraft. Amendment Subsector : T02 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS SP 94 Specificationforbronzeoil-retainingbushesandthrustwashers.For aircraft Subsector T03: ROAD VEHICLES Subsector : T03 Registration Date : SN Norway ID : NOT17031/ National Ref : NS Firetruck - Functional and technical requirments for fire trucks This standard specifies requirements and guidelines for participants in the value chain to ensure the necessary quality and efficient tendering processes related to planning, procurement and operation of firetrucks in public services. Subsector T16: LIFTS & ESCALATORS Subsector : T16 Registration Date : SN Norway ID : NOT17030/

52 National Ref : NS 3807 Evacuation of building using lifts Technical rules to establish a safety sone in order to use lifts for emergency evacuation of buildings using fire detection system. Page 52 Subsector T19: ROAD SAFETY Subsector : T19 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : ID : CH170018/0001 Draft for public enquiry National Ref : prsn Construction sites; Signaling of construction sites on main and secondary roads ** End of Sector **

53 List of non-electrotechnical subsectors Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

54 Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; ; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete ; CEN/WS 009 B04 Cement 74; B05 Fire tests B06 Gypsum / 241 B07 Glass B08 Doors and windows B09 Thermal matters ; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures B11 Metal structures B12 Masonry 179; ; 246 B13 Solar energy B14 Geotechnics ; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

55 B33 Building design ; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

56 Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products ; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products ; 298; 173 C03 Chemistry ; 363 C04 Laboratory glassware C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants C10 Starch 93 / C11 Tobacco C12 Glass plant / / C13 Fertilizers ; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; ; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics C22 Bio-Based products / 411 C99 Undetermined / 386

57 Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; ; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information ; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems ; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general ; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; ; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;