Monthly Notifications Register

Transcription

1 Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from to Register issued on A list of subsectors can be found at the end of this document.

2 Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from to Sector A SERVICES Register issued on

3 Subsector A99 UNDETERMINED Page 3 Subsector A99 (Secondary Subsector) Registration Date Organization MCCAA Country Malta ID /0001 ICS , National Ref SM 6200 Title Minors in marketing communication Scope The scope of this Maltese Standard is to define the participation of minors in marketing communication National ** End of Sector **

4 Information procedure Page 4 Monthly Notifications Register Notifications registered at CCMC from to Sector B BUILG AND CONSTRUCTION Register issued on

5 Subsector B01 FIRE PROTECTION Page 5 Subsector B01 Registration Date Organization EVS Country Estonia ID /0001 ICS , National Ref prevs 871 Title Fire safety and emergency exit doors and door hardware - Use Scope This standard specifies requirements for use of fire safety doors and emergency exit doors and there hardware in buildings. Requirements for emergency exit doors in this standard are implemented for doors on escape routes; these doors may have a function of fire safety or not. The particular need to meet the fire safety or emergency exit requirements depends on particular location of the door in the building. This standard does not include special requirements for keeping people in locked rooms. The solutions for this kind of rooms should be worked out separately for each room. This standard does not describe methods for testing of fire safety doors and emergency exit doors; these methods are described in separate standards. The use of this standard may be affected by development of European product standards for doors and windows. National Subsector B01 Registration Date Organization NBN Country Belgium ID BE664015/0001 Draft for public enquiry ICS National Ref prnbn S Title Fire safety in buildings - Ventilation openings in indoor staircases National Subsector B01 Registration Date Organization NBN Country Belgium ID BE664016/0001 Draft for public enquiry ICS National Ref prnbn S Title Fire detection and fire alarm systems - Voice Alarm Systems - Part 1 Selection criteria for Voice Alarm Systems National Subsector B02 STRUCTURES Subsector B02 Registration Date

6 Page 6 Organization ASI Country Austria ID /0001 ICS , National Ref ÖNORM B /A Title Eurocode 2 - Design of concrete structures - Part 1-1 General rules and rules for buildings - National specifications concerning ÖNORM EN , national commnts and national supplements Scope This Austrian Standard specifies national parameters to ÖNORM EN and shall be applied jointly with ÖNORM EN in Austria. This standard applies to the design of buildings and civil engineering works in plain, reinforced and prestressed concrete. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 Basis of structural design. National Subsector B02 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B Title Eurocode 7 Geotechnical design - Part 2 Ground investigation and testing - National specifications in connection with ÖNORM EN and national supplements Scope This ÖNORM defines requirements for geotechnical investigations and supports the implementation of ÖNORM EN These standards shall be applied jointly. This ÖNORM applies to geotechnical investigations of soil and rock as subsoil and construction material for all types of construction works, including underground constructions, construction of landfills and remediation of contaminated soils. For cavernous underground constructions deviations from the present ÖNORM are permissible, if sufficiently justified. This ÖNORM doesn t apply to mining, testing of rock as a construction product and the exploration of raw material deposits. This ÖNORM contains requirements concerning design, execution and evaluation of geotechnical investigations and should ensure that soil or rock properties of the subsoil are known when designing the geotechnical structure. National Subsector B02 Registration Date Organization BAS Draft Issue Date Country Bosnia and Herzegovina Latest Date for Comments ID /0001 Draft for public enquiry ICS National Ref nsbas EN /NA2016 Title Eurocode 1 - Actions on structures - Part 1-5 General actions - Thermal actions - National annex Scope This document constitutes the National Annex to BAS EN , Eurocode 1 - Actions on structures - Part 1-5 General actions - Thermal actions. The European Standard EN allows national safety parameters to be specified for a number of clauses. These

7 national determined parameters (NDP) cover alternative procedures, the provision of individual values, and the selection of classes from designated classification systems. The relevant parts of the text are identified in the European Standard by references to the possibility of national choice. This National Annex contains national provisions for the determination of thermal actions on buildings, bridges and other civil engineering works. Page 7 National Subsector B02 Registration Date Organization Country ID /0001 ICS National Ref Title House service connections facilities - Pinciples for planning National Subsector B02 Registration Date Organization UNMZ Draft Issue Date Country Czech Republic Latest Date for Comments ID /0001 ICS National Ref Title Bitumen and bituminous binders Bitumens for paving Scope This standard specifies requirements for Czech Republic unmodified bitumens for paving, defined by European standards EN 12591, EN , EN It made species selection and choice of optional characteristics that were part of the national annexes to European standards. National REV/AMD ČSN (2016) Subsector B04 CEMENT Subsector B04 Registration Date Organization BDS Country Bulgaria ID BG004004/0001 ICS National Ref prbds Title Cement. Determination of mineral composition of the clinker in the cement Scope The standard refers to the method of chemical analysis of Portland cement, sulfate resisting Portland cement, pozzolanic cement, sulfate resisting pozzolanic cement and cement with moderate heat release, which contain trass and sand, and gypsum additives to calculate clinker mineral composition. The standard does not apply to cement, containing additives, slag and limestone.

8 Page 8 National REV/AMD BDS Subsector B04 Registration Date Organization BDS Country Bulgaria ID BG004005/0001 ICS National Ref prbds 9192 Title Cement. Determination of the tricalcium aluminate content Scope The standard refers to the method for determining tricalcium aluminate content of clinker in sulfate resisting Portland cement, low heat cement, low heat ternary cement and tampon cement, which contain trass, sand, trass and sand, and limestone and gypsum additives, and of Portland cement clinker. National REV/AMD BDS Subsector B05 FIRE TESTS Subsector B05 Registration Date Organization Country ID /0001 ICS National Ref Title Fire and smoke control door and shutter assemblies in accordance with EN Installation and maintenance National Subsector B12 MASONRY Subsector B12 Registration Date Organization Country ID /0001 ICS National Ref Title Application of building products in structures - Part 402 Rules for the application of calcium silicate masonry units according to EN National Subsector B12 Registration Date

9 Page 9 Organization Country ID /0001 ICS National Ref Title Application of building products in structures - Part 404 Rules for the application of autoclaved aerated concrete masonry units according to EN National Subsector B12 Registration Date Organization Country ID /0001 ICS National Ref Title Application of building products in structures - Part 401 Rules for the application of clay masonry units according to EN National Subsector B25 GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector B25 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NPR Concept nl Title Guidelines for gas installations - Section gas pipe work - Part 13 Commissioning, operation and maintenance of gas pipe work with a maximum operating pressure 500 mbar Scope NPR applies to the commissioning, operation and maintenance gas installation pipe work with a aximum operating pressure 500 mbar. National Subsector B25 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NPR Concept nl Title Guidelines for gas installations - Section flue system - Part 47 Single flues for type B gas appliances - Choice of constructions and materials and dimensioning with the help of tables - Guidance to NEN

10 Page 10 Scope Single flues for type B gas appliances - Choice of constructions and materials and dimensioning with the help of tables. Guidance to NEN National Subsector B25 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NPR Concept nl Title Guidelines for gas installations - Section gas pipe work - Part 7 Gas underground pipe work - Guidelines for NEN 1078 and NEN 8078 Scope NPR applies to NEN 1078 and NEN According to the procedures of this part of the NPR the position, fastening and support, marks and corrosion. National Subsector B25 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NPR Concept nl Title Code of practice gas installations - Section gas pipe work - Part 8 Feeding of gas pipe work through walls and floors - Guidelines for NEN 1078 a nd NEN 8078 Scope This part applies to section 5 of NEN and NEN According to procedures in this part bushing in general, thruogh walls, floors and facades are subject. National Subsector B25 (Secondary Subsector) Registration Date Organization MSZT Draft Issue Date Country Hungary Latest Date for Comments ID /0001 Published Standard ICS , National Ref MSZ 1648 Title Natural gas for public utility services National Subsector B26 ROAD BUILG AND MAINTENANCE

11 Page 11 Subsector B26 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B Title Bituminous mixtures - Guidline for the preparation of declarations of performance - Part 1 Empirical approach Scope This ÖNORM specifies the methods used in Austria for initial type testing and the framework for the preparation of declarations of performance of bituminous mixtures, produced following the empirical approach. National Subsector B26 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B Title Bituminous mixtures - Guidline for the preparation of declarations of performance - Part 2 Performance based approach Scope This ÖNORM specifies the methods used in Austria for initial type testing and the framework for the preparation of declarations of performance of bituminous mixtures, produced following the performance based approach. National Subsector B26 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B 3588 Title Bituminous mixtures - Material specifications - Part 9 Asphalt for Ultra-Thin Layer (AUTL) - Rules for the implementation of ÖNORM EN Scope This ÖNORM specifies requirements of Asphalt for Ultra Thin Layers (AUTL) for use on roads, airfields and other trafficked areas considering the specific geographic, topographic and climatic conditions in Austria. It is designed to be applied in conjunction with ÖNORM EN and ÖNORM EN National Subsector B26 Registration Date Organization LST Country Lithuania ID /0001

12 Page 12 ICS , National Ref Title Bituminous mixtures for motor road. Requirements for activated mineral filler Scope This standart is applicable to activated mineral filler used to manufacture bituminous mixtures. National Subsector B26 Registration Date Organization LST Country Lithuania ID /0001 ICS , National Ref Title Bituminous mixtures for motor road. Testing methods for activated mineral filler Scope This standart specifies testing methods for activated mineral filler used to manufacture bituminous mixtures. National Subsector B29 AGGREGATES Subsector B29 Registration Date Organization BDS Country Bulgaria ID BG005009/0001 ICS , National Ref prbds Title Crushed natural additive materials for fire-resistant concrete and mortars Scope The standard refers to crushed aggregates derived by crushing strong rocks not containing quartz, calcite, zeolites and amorphous silica, intended for the production of refractory concrete with a binder Portland cement, used in non-aggressive environment at an operating temperature to 650 C. National REV/AMD BDS Subsector B30 FLOOR AND SURFACING Subsector B30 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B

13 Title Scope National Florrings for sports grounds - Part 3 Synthetic and bituminous bound surfaces Page 13 This ÖNORM describes synthetic surfaces and bituminous bound, which are used for sports facilities. It also includes requirements and tests procedures for the different layers and certification criterias. This ÖNORM also applies for the subbase and base layers of synthetic turf surfaces. Subsector B31 HEATING SYSTEMS IN BUILGS Subsector B31 Registration Date Organization SN Country Norway ID NOT16006/0001 Draft for public enquiry ICS National Ref prns 3420-BM Title Specification texts for building, construction and installations Part BM Ventilation and air conditioning integrated systems Scope This standard defines templates for spefication of functional to requirements for ventilation systems National Subsector B32 PRECAST CONCRETE PRODUCTS Subsector B32 Registration Date Organization BSI Country United Kingdom ID /0001 ICS National Ref BS 8297 Title Design, Manufacture and installation of architectural precast concrete cladding. Code of practice National Subsector B34 BUILG AND CONSTRUCTION ENVIRONMENTAL ASPECTS Subsector B34 Registration Date Organization MCCAA Country Malta ID /0001 ICS , National Ref SM 3700

14 Title Scope National Construction of Green Roofs Page 14 The scope of this Maltese Standard is to facilitate the design, adaptation and construction of Green Roofs in Malta Subsector B34 (Secondary Subsector) Registration Date Organization MCCAA Country Malta ID /0001 ICS , National Ref SM 3700 Title Construction of Green Roofs Scope The scope of this Maltese Standard is to facilitate the design, adaptation and construction of Green Roofs in Malta National Subsector B34 Registration Date Organization MCCAA Country Malta ID /0001 ICS , National Ref SM 6200 Title Minors in marketing communication Scope The scope of this Maltese Standard is to define the participation of minors in marketing communication National Subsector B99 UNDETERMINED Subsector B99 Registration Date Organization Country ID /0001 ICS National Ref Title Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer National

15 ** End of Sector ** Page 15

16 Information procedure Page 16 Monthly Notifications Register Notifications registered at CCMC from to Sector C CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on

17 Subsector C01 Food products Page 17 Subsector C01 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NEN Concept nl Title Milk and milk products - Enumeration of faecal enterococci Scope This standard describes a determination method of the number of D-streptococci in milk and milk products. National Subsector C01 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NEN Concept nl Title Milk and milk products - Detection of unwanted contamination of long shelf life liquid milk products Scope This standard describes a method for the testing of unwanted contamination of long shelflife liquid milk products. The method can be used to determine if bacteria are present in the product. National Subsector C01 Registration Date Organization TSE Country Turkey ID t /0002 ICS National Ref Title Edible oils of vegetable origin (not subject of a specific standard) Scope This standard specifies the vegetable oils not subject of a specific standard. Oils, having specific standard, are not specified. National Subsector C01 Registration Date Organization TSE Country Turkey ID t /0001 ICS National Ref

18 Title Scope National Macaroni This standard covers macaroni. Page 18 Subsector C01 Registration Date Organization TSE Country Turkey ID t /0002 ICS National Ref Title Pepper Pickle Scope This standard applies to pepper pickle. National Subsector C01 Registration Date Organization TSE Country Turkey ID t /0001 ICS National Ref Title Animal and Vegetable Fats and Oils-Determination and Detection of Mineral Oil Scope This standard covers the method of determination and detection of mineral oil in animal and vegetable fats and oils. National Subsector C01 Registration Date Organization TSE Country Turkey ID t /0001 ICS National Ref Title Traditional sour pomegranate concentrate Scope This standard specifies to traditional pomegranate concentrate. National Subsector C01 Registration Date Organization TSE Country Turkey ID t /0001 ICS

19 Page 19 National Ref Title Scope National Ayran This standard specifies ayran. Subsector C01 Registration Date Organization TSE Country Turkey ID t /0001 ICS National Ref Title Mayonnaise Scope This standard covers mayonnaise. It does not cover the salad sauces and salads which is prepared with mayonnaise. National Subsector C01 Registration Date Organization TSE Country Turkey ID t /0001 ICS National Ref Title Lavash Scope This standart contains lavash. It doesn't contains lavash that is selled non-packaged at produced place. National Subsector C01 Registration Date Organization TSE Country Turkey ID tst02383/0001 ICS National Ref Title Biscuits Scope This standard applies to biscuits. This standard does not apply to enriched biscuits. National ** End of Sector **

20 Information procedure Page 20 Monthly Notifications Register Notifications registered at CCMC from to Sector F FUNDAMENTAL STANDARDS Register issued on

21 Subsector F05 MEASURING INSTRUMENTS Page 21 Subsector F05 Registration Date Organization BSI Country United Kingdom ID /0001 ICS National Ref BS 7996 Title Torque measuring devices. Calibration and classification usingcontinual torque application. Method National Subsector F05 Registration Date Organization Country ID /0001 ICS National Ref Title Geometrical product specifications (GPS) - Micrometers - Part 1 Micrometers for external measurements; maximum permissible errors National Subsector F05 Registration Date Organization Country ID /0001 ICS National Ref 2270 Title Geometrical Product Specifications (GPS) - Dial test indicators (lever type) - Maximum permissible errors National Subsector F06 TERMINOLOGY PRINCIPLES Subsector F06 Registration Date Organization Country ID /0001 ICS National Ref 2347 Title Translation and interpreting services - Interpreting services - Interpreting at conferences

22 Page 22 National Subsector F07 DOCUMENTATION AND INFORMATION Subsector F07 Registration Date Organization BSI Country United Kingdom ID /0001 ICS National Ref BS 4971 Title Conservation and care of archive and library collections National Subsector F14 GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES Subsector F14 Registration Date Organization UNI Country Italy ID /0001 ICS , National Ref UNI Title Method for the determination of non-original toner cartridge print quality for monochromatic electrophotographic printer - Method of comparison non-original toner cartridge vs original toner cartridge Scope The standard specifies the requirements for non-original monochrome toner cartridges. The comparison method is applicable to any non-original monochrome toner cartridge. National Subsector F15 MATERIAL TESTING IN GENERAL Subsector F15 Registration Date Organization Country ID /0001 ICS National Ref Title Thermal analysis; differential thermal analysis; principles National

23 Subsector F19 OPTICS Page 23 Subsector F19 Registration Date Organization Country ID /0001 ICS National Ref Title Production in optical engineering - Diamond core drills - Part 2 With fitting cylinder National Subsector F19 Registration Date Organization Country ID /0001 ICS National Ref Title Production in optical engineering - Diamond core drills - Part 1 With fitting thread National Subsector F19 Registration Date Organization Country ID /0001 ICS National Ref Title Production in optical engineering - Diamond core drills - Part 3 With external fitting thread National Subsector F99 UNDETERMINED Subsector F99 Registration Date Organization BSI Country United Kingdom ID /0001 ICS National Ref BS 0 Title A standard for standards. Principles of standardization National

24 ** End of Sector ** Page 24

25 Information procedure Page 25 Monthly Notifications Register Notifications registered at CCMC from to Sector I MECHANICAL ENGINEERING Register issued on

26 Subsector I02 FASTENERS Page 26 Subsector I02 Registration Date Organization Country ID /0001 ICS National Ref Title Measuring- and test parameters for cold formed cylindrical helical compression springs National Subsector I02 Registration Date Organization Country ID /0001 ICS National Ref 7513 Title Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing National Subsector I02 Registration Date Organization Country ID /0001 ICS National Ref 7516 Title Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing National Subsector I11 MACHINE TOOLS Subsector I11 Registration Date Organization Country ID /0001 ICS National Ref Title Firefighting and fire protection - Portable generator - Part 1 Generating set <größer => 5kVA National

27 Page 27 Subsector I11 Registration Date Organization Country ID /0001 ICS National Ref Title Firefighting and fire protection - Portable generator - Part 2 Generating set <kleiner> 5 kva National Subsector I19 NUCLEAR ENERGY Subsector I19 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM S Title Medical remote-controlled automatically-driven afterloading systems - Part 1 Acceptance testing of functional performance characteristics Scope This ÖNORM applies to medical remote-controlled automatically-driven afterloading systems and specifies the acceptance testing of such systems. National Subsector I19 Registration Date Organization Country ID /0001 ICS National Ref Title Components for hot cells - Part 1 Requirements on design for remote handling National Subsector I19 Registration Date Organization Country ID /0001 ICS National Ref Title Procedures of dosimetry with probe-type detectors for proton and ion radiation Part 1

28 Ionization chambers Page 28 National Subsector I28 FLUID POWER Subsector I28 Registration Date Organization Country ID /0001 ICS National Ref Title Pressure fluids - Hydraulic oils - Part 1 HL hydraulic oils; Minimum requirements National Subsector I28 Registration Date Organization Country ID /0001 ICS National Ref Title Pressure fluids - Hydraulic oils - Part 2 HLP hydraulic oils; Minimum requirements National Subsector I28 Registration Date Organization Country ID /0001 ICS National Ref Title Pressure fluids - Hydraulic oils - Part 3 HVLP hydraulic oils; Minimum requirements National Subsector I31 VALVES Subsector I31 Registration Date Organization Country ID /0001

29 ICS National Ref Title Valves for drinking water installations on private premises - Anti-vacuum valve Types D and E - Requirements and tests Page 29 National Subsector I31 Registration Date Organization TSE Country Turkey ID 0t111098/0001 ICS National Ref Title Blistered panels - High density polyethylene (HDPE) - Used for foundation wall protection and drainage works Scope This standard covers blistered panels used for foundation wall protection and drainage works of High density polyethylene (HDPE) National ** End of Sector **

30 Information procedure Page 30 Monthly Notifications Register Notifications registered at CCMC from to Sector M METALLIC MATERIALS Register issued on

31 Subsector M01 STEEL Page 31 Subsector M01 Registration Date Organization ASI Country Austria ID /0001 ICS , National Ref ÖNORM B 4707 Title Steel for the reinforcement of concrete - Requirements and classification Scope This ÖNORM specifies requirements and the reinforcement steel grades of weldable reinforcing steel used for the reinforcement of concrete structures. This ÖNORM dealt with bars, reinforcing steel manufactured in coils and subsequently straightened, coils for further machine processing in de-coiling machines and also sheets and lattice girders of factorymade machine-welded fabric. National Subsector M05 WELG Subsector M05 Registration Date Organization Country ID /0001 ICS National Ref Title Numerical welding simulation - Execution and documentation (ISO/TS ); German version CEN ISO/TS National Subsector M05 Registration Date Organization Country ID /0001 ICS National Ref Title Graphical Representation of Welded, Soldered and Brazed Joints - Concepts and Terms for Soldered and Brazed Joints and Seams National Subsector M16 MECHANICAL TESTS FOR METALS Subsector M16 Registration Date Organization Country

32 Page 32 ID /0001 ICS National Ref Title Testing of metallic materials - Rockwell hardness test - Part 3 Modified Rockwell scales Bm and Fm for thin steel sheet National ** End of Sector **

33 Information procedure Page 33 Monthly Notifications Register Notifications registered at CCMC from to Sector N NON-METALLIC MATERIALS Register issued on

34 Subsector N01 PAPER AND BOARD Page 34 Subsector N01 Registration Date Organization SIST Draft Issue Date Country Slovenia Latest Date for Comments ID /0001 ICS , National Ref dsist TS Title Paper and board (paperboard, cardboard and corrugated board) Archive quality for preparation of the record, document, books, and for protection of document materials on paper Scope The goal of the document is to define technical bases for conservation of cultural heritage on paper. All the archive type of paper, board, pulps and corrugated fibreboard have to comply with archive quality for preparation of the record, document, books, and for protection of document materials on paper. National Subsector N01 Registration Date Organization ASI Country Austria ID /0001 ICS , National Ref ÖNORM A 1123 Title Paper and board intended to come into contact with foodstuffs - Conditions for determination of overall migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant Scope This ÖNORM specifies a method to assess the overall migration from paper and board. This test method is developed for paper and board intended to come in contact with dry, nonfatty foodstuffs and paper and board for baking purposes. In individual cases the modified polyphenylenoxide (MPPO) can be seen as a substitute simulant for fatty contact. MPPO can also be seen as a substitute simulant for olive oil. National Subsector N03 PETROLEUM PRODUCTS Subsector N03 Registration Date Organization MSZT Draft Issue Date Country Hungary Latest Date for Comments ID /0001 Published Standard ICS , National Ref MSZ 1648 Title Natural gas for public utility services National

35 Page 35 Subsector N03 Registration Date Organization MSZT Draft Issue Date Country Hungary Latest Date for Comments ID /0001 Published Standard ICS , National Ref MSZ 459 Title Determination of Asfaltenes in Crude Petroleum and Petroleum products with n- HeptaneDetermination of Asfaltenes in Crude Petroleum and Petroleum products with n- Heptane National Subsector N03 (Secondary Subsector) Registration Date Organization MSZT Draft Issue Date Country Hungary Latest Date for Comments ID /0001 Published Standard ICS , National Ref MSZ 459 Title Determination of Asfaltenes in Crude Petroleum and Petroleum products with n- HeptaneDetermination of Asfaltenes in Crude Petroleum and Petroleum products with n- Heptane National Subsector N09 PLASTICS Subsector N09 Registration Date Organization Country ID /0001 ICS National Ref Title Polyethylene (PE) pipes - PE 80, PE General quality requirements, testing; Text in German and English National Subsector N11 WOOD-BASED PANELS Subsector N11 Registration Date Organization Country ID /0001 ICS

36 Page 36 National Ref Title Wood adhesives - Determination of properties of use of wood adhesives for load-bearing timber structures National Subsector N14 PLASTICS PIPES Subsector N14 Registration Date Organization NBN Country Belgium ID BE664014/0001 Draft for public enquiry ICS , , National Ref prnbn T Title Plastics piping systems Polypropylene (PP) modules for water infiltration and storage Requirements and methods of test National Subsector N20 CERAMICS Subsector N20 Registration Date Organization Country ID /0001 ICS National Ref Title Ceramics, glass, glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food National Subsector N21 GASEOUS FUELS AND COMBUSTIBLE GAS Subsector N21 Registration Date Organization UNI Country Italy ID /0001 ICS , National Ref UNI Title Method for the assessment of potential production of methane from anaerobic digestion in wet conditions. Scope This technical specification defines a batch laboratory method for the quantitative assessment of the biochemical methane production by biodegradation of liquid and solid

37 Page 37 organic substrates produced by anaerobic microorganisms. It is not applicable to the assessment of biochemical methane production from digestate if the goal is to determine its Green House Gas emissions and its residual biomethane potential. It refers to tests made in mesophilic and wet conditions, thus on a mixture with a total solid component less than 50 kg/m3 and in a temperature range from 35 to 42 C. The method is applicable to biological tests. Parametric or stoichiometric methods are not in the scope of this technical specification. National ** End of Sector **

38 Information procedure Page 38 Monthly Notifications Register Notifications registered at CCMC from to Sector S HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on

39 Subsector S04 PROTECTIVE CLOTHING AND EQUIPMENT Page 39 Subsector S04 Registration Date Organization SIS Country Sweden Latest Date for Comments ID /0001 ICS National Ref Title Health care textiles - Fabrics for use in health care - General requirements - Characteristics, testing and inspection Scope This standard specifies requirements for health care textiles. This standard also specifies suitable test methods and criteria for delivery control and for disputes in conjunction with complaints National Subsector S04 Registration Date Organization SIS Country Sweden Latest Date for Comments ID /0001 ICS National Ref Title Health care textiles Operating textiles Clean air suit Scope This standard specifies requirements, design and dress patterns for clean air suit, both disposable and reusable, for staff at invasive procedures. The clean air suit consists of operating blouse, trousers and hood. National Subsector S04 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NEN Concept nl Title Protective clothing - Clothing that protects against ticks and that has been treated with permethrin Scope Gives recommendations for the choice of the right protection by visibility protective clothing. The options given in EN 471 are used. The use and maintenance are described because wear of the visibility goes faster than the wear of the clothing itself. National Subsector S05 DENTISTRY Subsector S05 Registration Date Organization

40 Page 40 Country ID /0001 ICS National Ref Title Dentistry - Jaw relation recording material National Subsector S06 VIBRATION & SHOCK Subsector S06 Registration Date Organization ASI Country Austria ID / , , ICS , National Ref ÖNORM ISO Title Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 1 General guidance Scope This ÖNORM provides general guidance on ground-borne vibration generated by the operation of rail systems, and the resultant ground-borne noise in buildings. It lists the factors and parameters that need to be taken into consideration and offers guidance on prediction methods appropriate for a range of circumstances (e.g. to support the assessment of effects on human occupants and sensitive equipment or operations inside the buildings in addition to the predictions required to assess the risk of damage to building structures). Attention is paid in ISO to characteristics of the source emission (e.g. train, wheel, rail, track, supporting infrastructure); propagation path transmission (e.g. ground condition, distance); and receiving structures immission (e.g. foundations, form of building construction). The guidance covers all forms of wheel and rail systems, from light-rail to high-speed trains and freight. ISO provides guidance for rail systems at-grade, on elevated structures and in tunnels. It does not deal with vibration arising from the construction and maintenance of the rail system. It does not deal with airborne noise. Structure-radiated noise from elevated structures, which can have a significant environmental impact, is also excluded. National Subsector S08 AIR QUALITY Subsector S08 Registration Date Organization NEN Country Netherlands ID /0001 ICS National Ref NPR Concept nl

41 Page 41 Title Stationary source emissions - Quality assurance of automated measuring systems Scope Gives guidance to the establishment of the procedures of NEN-EN National Subsector S16 AIDS FOR THE DISABLED Subsector S16 Registration Date Organization Country ID /0001 ICS National Ref Title Tactile walking surface indicators in public areas National Subsector S20 WASTE COLLECTION, HANDLING AND TRANSPORTATION Subsector S20 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Refuse collection vehicles - Levels of performance and ways and conditions of acceptance of street cleaning and municipal waste management services - Part 1 General requirements Scope This standard defines general requirements for levels of performance and ways and conditions of acceptance for street cleaning and waste management services, and requirements to be taken into account to draw up and operate service contracts for a better result in terms of qualitative and quantitative performances definition and survey, defining agreements in case of deviations, economic optimization, environmental sustainability and pollution prevention. National Subsector S20 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Refuse collection vehicles - Levels of performance and ways and conditions of acceptance for street cleaning and municipal waste disposal services - Part 2 Ways to measure the levels of performance and to settle the acceptance, to draw up and to

42 Scope National Page 42 operate contracts for general or separate collection services of municipal waste, container cleaning and maintenance, abandoned waste removal This standard defines levels of performance, ways and conditions of acceptance and needs to be taken into account to draw up and operate service contracts for - all kind of waste collection of low or high intensity, normal or fine quality, including or not the measure of the filling levels of the containers; - container cleaning and maintenance; - abandoned waste removal. This standard defines the service elements and parameters, the ways to check and measure them, the catalogue and description of the main fulfilled services, the performance and quality control systems to be taken and the ways to evaluate the supplied levels of performance. Subsector S20 Registration Date Organization UNI Country Italy ID /0001 ICS National Ref UNI Title Waste management - Waste visual elements - Visual elements for waste containers Scope This standard defines a way to identify various fractions of waste through visual elements, including colors, symbols and text. This standard is intended to create a unique operative model in order to clearly identify the waste containers, facilitating collection and recovery/reuse services for both consumers and service managers. National Subsector S20 Registration Date Organization Country ID /0001 ICS National Ref Title CleANopen - Application profile for municipal vehicles; English version CEN/TR 16815, only on CD-ROM National Subsector S26 ENVIRONMENTAL MANAGEMENT Subsector S26 Registration Date Organization UNI Country Italy ID /0001

43 Page 43 ICS National Ref UNI Title Environmental Management of Products - Estimation, reporting and use of the uncertainty of Life Cycle Assessment (LCA) results - Requirements and guidelines Scope This standard provides requirements and guidelines for the estimation, reporting and use of the uncertainty of Life Cycle Assessments results. This standard considers the uncertainty originated from inventory data used in the LCA study. National Subsector S99 UNDETERMINED Subsector S99 Registration Date Organization ASRO Draft Issue Date Country Romania Latest Date for Comments ID /0001 ICS National Ref SR Title Sterilization of medical waste Requirements for development, validation and routine control of a low temperature sterilization process of medical waste by multi-action treatment using microwave field, ultraviolet light and ozone Scope The proposed standard specifies the requirements for the development, validation and routine control of a low temperature sterilisation process of medical waste by multi-action treatment using microwave field, ultraviolet light and ozone. The types of medical waste (i.e. EWC codes - European Waste Catalogue codes) which can be treated for the purpose of sterilisation using the referred sterilisation process are a) EWC code (i.e. sharps except *) b) EWC code * (i.e. waste whose collection and disposal is subject to special requirements in order to prevent infection) National REV/AMD Specific documents provided by S. PROCESS INNOVATION NUCLEUS S.R.L, the initiator of the new work item, including the patent nr , "Method and apparatus for the sterilization of the medical waste". Subsector S99 Registration Date Organization UNI Country Italy ID /0001 ICS , National Ref UNI Title Confined spaces - Classification and safety criteria Scope Many workplaces contain areas that are considered "confined spaces" because while they are not necessarily designed for people, they are large enough for workers to enter and perform certain jobs. A confined space also has limited or restricted means for entry or exit and is not designed for continuous occupancy. Confined spaces include, but are not limited to, tanks, vessels, silos, storage bins, hoppers, vaults, pits, manholes, tunnels, equipment housings, ductwork, pipelines, etc. The Presidential Decree 177/2011 requires the observance of obligations for the contracting Employer that don t take into account the different types of confined spaces (structural or plants differences, work activities, nature

44 Page 44 and type of used hazardous substances). The aim of a standard on this topic is to support the Employers in analyzing and assessing whether within the company there are areas which fall within the scope of Presidential Decree 177/2011, bringing operational guidance on their management. In order to access into confined spaces, after preliminary verification at the work, it can be useful to divide the environments in various types, identified either on the basis of structural and plant characteristics both in relation to work activities from which the risk originates. Specific procedures, preventive and protective measures and emergency procedures should be associated with these different types. National Subsector S99 Registration Date Organization Country ID /0001 ICS National Ref Title Recording in medical application of ionizing radiation - Part 3 Brachytherapy with enclosed radiation sources National Subsector S99 Registration Date Organization Country ID /0001 ICS National Ref Title Image quality assurance in diagnostic X-ray departments - Part 16 Documentation of clinical image processing parameters in digital X-ray systems National ** End of Sector **

45 Information procedure Page 45 Monthly Notifications Register Notifications registered at CCMC from to Sector T TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on

46 Subsector T01 SHIPBUILG AND MARITIME STRUCTURES Page 46 Subsector T01 Registration Date Organization Country ID /0001 ICS National Ref Title Replenishment of ships with liquefied natural gas (LNG) as a fuel - Technical delivery conditions and test criteria for couplings - Part 1 Dry couplings National Subsector T02 AEROSPACE Subsector T02 Registration Date Organization Country ID /0001 ICS National Ref Title Aerospace series - Sleeves - Wall thickness 0,5 mm, for fasteners with reduced countersunk head; Text in German and English National Subsector T03 ROAD VEHICLES Subsector T03 Registration Date Organization LVS Draft Issue Date Country Latvia Latest Date for Comments ID /0001 Draft for public enquiry ICS National Ref LVS /prA1 Title Ministery of Defence - Military police vehicles and Ministery of Internal Affairs vehicles, their painting and equipment Scope Standard sets additional requirements for Ministery of Internal Affairs cars and Ministery of Defence - Military Police vehicles, their painting and equipment National REV/AMD LVS 63 Subsector T03 Registration Date Organization BSI Draft Issue Date Country United Kingdom Latest Date for Comments ID /0001 Draft for public enquiry

47 Page 47 ICS National Ref Title National BS A1 Automotive services. Specification for vehicle damage repair process. Amendment Subsector T03 Registration Date Organization SIS Country Sweden Latest Date for Comments ID /0001 ICS National Ref Title Commercial road vehicles Drawbar coupling Interchangeability Installations Scope This Swedish Standard specifies the characteristics necessary for interchangeability in installation of drawbar couplings on the frame (cross member, drawbeam or mounting bracket) of towing vehicles for trailer. This Swedish Standard is applicable to drawbar couplings intended for connection to trailers equipped with a drawbar eye on the drawbar of the trailer. Characteristics not specified are left to the discretion of the component manufacturer. National Subsector T03 Registration Date Organization SIS Country Sweden Latest Date for Comments ID /0001 ICS National Ref Title Commercial road vehicles 57 mm clevis coupling Interchangeability Scope This Swedish Standard specifies the characteristics necessary for interchangeability in application of clevis couplings 57 mm to tow a trailer. This Swedish Standard is applicable to 57 mm clevis couplings intended for connection to trailers equipped with a SS mm drawbar eye on the drawbar of the trailer. National Subsector T03 Registration Date Organization SIS Country Sweden Latest Date for Comments ID /0001 ICS National Ref Title Commercial road vehicles drawbar eye Interchangeability Installations Scope This Swedish Standard specifies the characteristics of drawbar eyes installations, necessary for interchangeability in installation to a drawbar of a towed trailer. This Swedish Standard is applicable to mechanical connections designed for commercial

48 Page 48 vehicles and trailers, the maximum mass of which is above 3,5 t. National Subsector T03 Registration Date Organization SIS Country Sweden Latest Date for Comments ID /0001 ICS National Ref Title Commercial road vehicles 57 mm drawbar eye Interchangeability Scope This Swedish Standard specifies the characteristics of 57 mm drawbar eyes, necessary for interchangeability in applications together with drawbar eyes 57 mm to tow a trailer. This Swedish Standard is applicable to mechanical connections designed for commercial vehicles and trailers, the maximum mass of which is above 3,5 t.. National Subsector T09 MATERIALS HANDLING AND STORAGE EQUIPMENT Subsector T09 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B Title Terminals for transshipment of goods - Planning - Part 3 Railway sidings Scope This ÖNORM is to be used as basis for the planning of new railway sidings for cargo transfer and for changes of existing plants. It is valid in principle for railway sidings with a rule track gauge of 1,435 mm (standard gauge) and can be used in a general manner also for railway sidings with other track gauges (narrow gauge). National Subsector T09 Registration Date Organization ASI Country Austria ID /0001 ICS National Ref ÖNORM B Title Terminal for transshipment of goods - Planning - Part 5 Terminals for combined traffic Scope This Austrian standard applies to the planning of terminals for combined traffic. Depending on the concerned transport modes (road, rail, water) it shall be used together with ÖNORM B to -4 and -6. It deals with common transshipment types of combined traffic. Combined traffic involving aircraft is not included. In this regard see the list of standards in the bibliography.

49 Page 49 National Subsector T14 PACKAGING Subsector T14 Registration Date Organization Country ID /0001 ICS National Ref Title Packaging test - Testing of seams of sacks - Part 1 Determination of endurance of seams of paper sacks National Subsector T18 ELEVATING PLATFORMS Subsector T18 Registration Date Organization BSI Country United Kingdom ID /0001 ICS National Ref BS 7981 Title Code of practice for the installation, maintenance, thorough examinationand safe use of mast climbing work platforms (MCWPs) National Subsector T18 Registration Date Organization BSI Country United Kingdom ID /0001 ICS National Ref BS 5974 Title Temporary suspended access equipment National ** End of Sector **