Monthly Notifications Register

Transcription

1 Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from to Register issued on : A list of subsectors can be found at the end of this document.

2 Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from to Sector A : SERVICES Register issued on :

3 Subsector A99: UNDETERMINED Page 3 Subsector : A99 Registration Date : UNI Italy Project ID : /0001 Project Established U Non-regulated professions - Professionals of photography and related visual communication - Definition of knowledge, skill and competence requirements This standard specifies the requirements for the professionals photographers in the field of related visual communication, in terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF. This standard describes this professional in any of his operational context (free-lance, entrepreneur, employee), from photo shoot up to presentation. Subsector : A99 Registration Date : UNI Italy Project ID : /0001 Project Established U Financial education - Guidance for application and control of UNI The technical report provides some indications about the application of UNI 11402, with particular reference to the requirements of the organization that design and providing financial education services in accordance with UNI The technical report applies to all entities (organization or person) providing financial educational services to different users. REV/AMD UNI 10897:2001 Subsector : A99 Registration Date : UNI Italy Project ID : /0001 Project Established U Services - Nursing homes - Service requirements The standard defines requirements for the residential service in nursing homes REV/AMD UNI 10881:2000 ** End of Sector **

4 Information procedure Page 4 Monthly Notifications Register Notifications registered at CCMC from to Sector B : BUILDING AND CONSTRUCTION Register issued on :

5 Subsector B01: FIRE PROTECTION Page 5 Subsector : B01 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM F 1056 Periodic testing and maintenance of mobile fire extinguishers - Additional provisions to ÖNORM EN Certification of experts This ÖNORM defines the testing and maintenance of mobile fire extinguihers, in accordance with the charges of ÖNORM EN as well as requirements for experts for maintenance of mobile fire extinguishers and their certification. Subsector : B01 Registration Date : BSI United Kingdom Project ID : /0002 Draft for public enquiry BS Fire curtain assemblies - Spec BS Active fire curtain barrier. Assemblies. Part 1. Specification Subsector : B01 Registration Date : BSI United Kingdom Project ID : /0001 Project Established BS COP functional recs smoke+heat BS Components for smoke and heat control systems. Part 7: Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 16: Pulley block appliance set for the rescue from heights and depths up to 30 m

6 Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 17: Appliance set for protection against falling from heights Page 6 Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Tool-box for fire-brigades Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 9: Tool chests for metalworking and woodworking Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 10: Sealing chest Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established

7 Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 5: Set of multi purpose pull devices Page 7 Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 4: Tool chest for chimney Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Electrical tool-box for fire-brigades with insulated tools up to V Subsector : B01 Registration Date : UNI Italy Project ID : /0001 Project Established U Automatic fire detection and fire alarm systems - Design, installation and operation This Standard specifies criteria for design, installation and use of automatic fire detection and fire Alarm systems. It applies to automatic fire detection and fire Alarm systems, connected or not to fire extinguishing systems, to be installed in civil and industrial buildings. REV/AMD UNI 9725:2010 Subsector B02: STRUCTURES Subsector : B02 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : Project ID : CH120012/0001 Draft for public enquiry

8 Page SIA 261 Actions on Structures REV/AMD SIA 261 (2003) Subsector B03: CONCRETE Subsector : B03 Registration Date : ASI Austria Project ID : /0001 Project Established , ONR Prestressed concrete - Post-tensioning systems - Requirements for the staff which is occupied with the planning and implementation of structures with preliminary tension Pretressing is a technique which has to be treated as a single set of procedures including selection of the system, supply, installation, follow-up services and technical support. Such a set of procedures is offered by prestressed concrete contractors. This ONR regulates the demands and questions of the education and the professional knowledge of personnel which is occupied with the implementation planning and production of structures of prestressed concrete and the supervision of the accompanying works. Subsector : B03 Registration Date : NEN Netherlands Project ID : /0001 Project Established , NEN 8670:2012 Concept nl Additional regulations for the manufacture of concrete structures (with NEN-EN 13670) This standard specifies requirements and rules for the execution and assessment of concrete constructions manufactured according to NEN-EN en NEN Appendix A gives regulations for the agitation of concrete. Appendix B gives specifications for the treatment and protection of young concrete. The standard is applicable to in situ constructions as well as to constructions manufactured in advance. Subsector : B03 Registration Date : NEN Netherlands Project ID : /0001 Project Established , NEN 7024:2005/A1:2012 Concept nl Concrete slope-elements This document is an amendment to NEN 7024:2005.

9 Page 9 Subsector : B03 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : Project ID : CH120011/0001 Draft for public enquiry SIA 262/1 Concrete Structures - Supplementary Specifications REV/AMD SIA 262/1 (2003) Subsector B09: THERMAL MATTERS Subsector : B09 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B 6010 Materials for thermal insulation - Test methods This Austrian Standard is applicable to all insulating materials for building construction (factory-made or produced on site) as well as for insulation products used in building equipment and industrial installations. This ÖNORM summarizes the relevant European test methods for insulating materials. It ensures a unified procedure for testing of specified product characteristics and/or product performance of insulating materials. This ÖNORM does not affect the provisions of factory production control (e.g. test frequency, samples, number) defined by European product standards and/or specifications. Subsector : B09 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM B 6124 Anchors for external thermal insulating composite systems This Austrian Standard shall be applied to anchors, connectors and dowels intended to fasten mechanically, in addition to bonding on the substrate, the external thermal insulating composite systems according to ÖNORM B 6400 and ÖNORM B also for deflection of horizontal wind power and in order to ensure durable friction adhesion. These fastening devices are inserted through the insulating material into the supporting substrate and shall be provided with the appropriate European Technical Approval (ETA) for this application as well as with CE-marking.

10 Page 10 Subsector B13: SOLAR ENERGY Subsector : B13 Registration Date : BSI United Kingdom Project ID : /0002 Draft for public enquiry BS 5918 CoP for solar hot water BS Solar heating systems for domestic hot water. Code of practice Subsector B14: GEOTECHNICS Subsector : B14 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B Eurocode 7: Geotechnical design - Part 1: General rules - National specifications and supplements concerning ÖNORM EN This ÖNORM is the National Annex to ÖNORM EN It defines nationally determined parameters as listed in ÖNORM EN and has to be applied jointly with ÖNORM EN Subsector : B14 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B Geotechnics - Testing of soil - Determination of density - Laboratory methods This ÖNORM describes laboratory methods and equipment for the determination of density of naturally and mechanically compacted soils. Specifications concerning field methods are given in ÖNORM B and for the determination of density of noncohesive soils for minimum and maximum compactness in ÖNORM B Subsector : B14 Registration Date : ASI Austria

11 Page 11 Project ID : /0001 Project Established ÖNORM B Geotechnics - Testing of soil - Determination of density - Field methods This ÖNORM describes field methods and equipment for the determination of density of naturally and mechanically compacted soils. Specifications concerning laboratory methods are given in ÖNORM B and for the determination of density of non-cohesive soils for minimum and maximum compactness in ÖNORM B Subsector : B14 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B 4424 Geotechnics - Testing of soil - Assessment of organic content This ÖNORM describes methods for the assessment of the organic content of soils using geotechnical test. The organic content is a prerequisite for the geotechnical assessment and classification of soils for civil engineering purposes Subsector : B14 Registration Date : DS Draft Issue Date : Denmark Latest Date for Comments : Project ID : 0M264782/0001 Project Established DSF/DS 475:2012 Code of Practice for trenching for underground pipes and cables This code deals with general physical requirements which are independent of the pipe or cable to be laid. It functions as an umbrella to Dansk Standard's codes for specific pipes, and to possible future codes for cables. Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY Subsector : B17 Registration Date : DIN Germany Project ID : /0001 Project Established Colours and colour limits for signal lights; general rules

12 Page 12 Subsector B20: DRAINAGE EQUIPMENT Subsector : B20 Registration Date : DS Draft Issue Date : Denmark Latest Date for Comments : Project ID : 0M264823/0001 Draft for public enquiry DSF/DS 432 Till. 1:2012 Code of Practice for Sanitary Drainage - Wastewater Installations - Amd: 1 - Prevention against flooding - Anti-flooding devices for buildings - Classification This code of pratice applies to sanitary drainage installlations in buildings and in the ground inside the site for transport of sewage, rainwater and drainage water. The transport can be let to main wastewater pipes, to a sewage disposal plant for reception and percolation. The code also applies to sanitary drainage for black liquid, liquid manure and similar liquid, from and including the floor outlet, channels etc.for the connection to containers. The code applies for both new installations and to improvements and additions to existing systems. Repairs of pipes and minor changes by replacement of specific sanitary appliances, sanitary tapware, devices, tanks etc. can be made with materials and methods which was allowed according to regulations in force when the installation was made. Fire technical measures are not a part of this standard. The overall requirements in clause 2 comprises all types of sanitary drainage installations also in clause 8 given special sanitary drainage installations. The requirements and directions in chapter 3 to 7 are aiming primarily on sanitary drainage installations as traditionally are made in Denmark. This means use of gravity systems where reductions of pressure variations are made by air supply through the water bearing pipes i.e. from possible airing. Regarding drainiage systems reference are made to DS 436 Code for practice for groundwater drainage of structures. The standard comprises specific pipe conditions. For non specific condittions reference is made to DS 475 Code of practice for trenching for underground pipes and cables. Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established , NEN :2012 Concept nl Dutch edition based on NEN-EN Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional

13 requirements for polyethylene (MOP up to and including 10 bar) Page 13 Describes the specific functional recommendations for polyethylene (PE) pipelines in addition to the general functional recommendations of EN focussed on the Dutch situation. Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established , NEN :2012 nl Dutch edition based on NEN-EN Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel Describes the specific functional recommendations for steel pipelines in addition to the general functional recommendations of EN focussed on the Dutch situation. Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established , NEN :2012 Concept nl Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for ductile cast iron with a MOP of 8 bar Is applicable to the design, installation, testing, use, disuse, management, maintenance, renovation of pipework and all related activities Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established , NEN :2012 Concept nl Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Specific functional recommendations for high impact PVC with a MOP of 200 mbar Is applicable to the design, installation, testing, use, disuse, management, maintenance, renovation of pipework and all related activities

14 Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established NPR :2012 Concept nl Code of practice gas installations - Section gas pipe work - Part 5: Gas pipe work - Installation general - Guidelines for NEN 1078 and NEN 8078 This part applies to clauses 5.2, 5.7 and 5.8 of NEN 1078 and NEN 8078:2004. Page 14 Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established NPR :2012 Concept nl Code of practice gas installations - Section gas pipe work - Part 6: Gas pipe work above ground - Guidelines for NEN 1078 en NEN 8078 This part applies to 5.1 of NEN 1078:2004 and NEN 8078:2004. According to the procedures in this part positioning, fastening and support, marks and corrosion are subject. Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established NPR :2012 Concept nl Code of practice gas installations - Section gas pipe work - Part 7: Gas underground pipe work - Guidelines for NEN 1078 and NEN 8078 This part applies to 5.2 of NEN 1078:2004 and NEN 8078:2004. According to the procedures of this part of the NPR the position, fastening and support, marks and corrosion. Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : UNI Italy Project ID : /0001 Project Established U Geosynthetic barriers - Structured polymeric geosynthetics made of high and medium density polyethylene - Characteristics and acceptance limits This standard specifies characteristics, test methods, acceptance limits with related

15 Page 15 importance for polymeric geosynthetic barriers, structured on one or both the faces, made of medium and higth density poliethylen. This standard gives guidance to the application in Italy of UNI EN 13361, UNI EN 13362, UNI EN 13491, UNI EN 13492, UNI EN e UNI EN Subsector : B27 Registration Date : UNI Italy Project ID : /0001 Project Established U Geosynthetic barriers - Polymeric geosynthetics made of plastified polyvinilcloride - Characteristics and acceptance limits This standard specifies characteristics, test methods, acceptance limits with related importance for polymeric geosynthetic barriers, made of plastified polyvinilcloride. Subsector B31: HEATING SYSTEMS IN BUILDINGS Subsector : B31 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM H 5170 Heating systems - Requirements for construction and safety engineering as well as for fire prevention and environmental protection The present Austrian Standard shall be applied to heating appliances for heating and hot water heating systems (maximum operating temperature up to 100 C and maximum operating pressure up to 6 bar) using liquid heat media, which require installation spaces, heating rooms or fuel storage facilities according to legal provisions. Subsector B99: UNDETERMINED Subsector : B99 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM A Object management - Data structures - Part 2: Maintenance principles for building and facility operation data This Austrian Standard lays down general requiremenets for data maintenance principles

16 Page 16 for the systematic collection, storage, retrieval and sharing of object management plans and follows the defined data structures in the Austrian standards ÖNORM B , B and A A general order structure is defined, which is called the data retention rules (DHO). It supports all business processes of construction and facility operation and provides a general framework with standardized coded designations. Subsector : B99 Registration Date : EVS Estonia Project ID : /0001 Project Established , project General requirements for roof building This Estonian standard sets general requirements for roof building Subsector : B99 Registration Date : EVS Estonia Project ID : /0001 Project Established , project Requirements for metal roof building This Estonian standard sets requirements for metal roof building Subsector : B99 Registration Date : EVS Estonia Project ID : /0001 Project Established , project Requirements for fazercement corrugated sheets roof building This Estonian standard sets requirements for fazercement corrugated sheets roof building Subsector : B99 Registration Date : EVS Estonia Project ID : /0001 Project Established , project

17 Requirements for rooftile roof building This Estonian standard sets requirements for rooftile roof building Page 17 Subsector : B99 Registration Date : DIN Germany Project ID : /0001 Project Established Waterproofing of indoor spaces Subsector : B99 Registration Date : DIN Germany Project ID : /0001 Project Established Waterproofing of water tanks, reservoirs and pools Subsector : B99 Registration Date : UNI Italy Project ID : /0001 Project Established U Cultural Heritage - Indoor microbial aerosol surveys - Active sampling method by impactors The norm concerns the method for quantitative and qualitative detection of viable cultivable microflora diffused by air in indoor environments by active sampling. This method involves the aspiration of known volumes of air by sampler which direct the air stream at the collection surface, generally consisting of Petri dishes containing solid culture media. On the basis of the number of microorganisms developed in culture is possible to determine the charge of viable micro-organisms cultivated on a volume of air. The method is more suitable for the detection of cultivable heterotrophic bacteria and micro fungi To process the analyses report, the norm includes a data sheet to collect information on the examined environment and a sheet for monitoring results report. REV/AMD UNI 11047:2003 ** End of Sector **

18 Information procedure Page 18 Monthly Notifications Register Notifications registered at CCMC from to Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on :

19 Subsector C01: Food products Page 19 Subsector : C01 Registration Date : TSE Turkey Project ID : t /0001 Project Established Canned Peas This standard applies to canned peas. Subsector : C01 Registration Date : TSE Turkey Project ID : t /0001 Project Established Canned Mushrooms This standard applies to canned mushrooms which is produced with cultered mushroom. Subsector : C01 Registration Date : TSE Turkey Project ID : t /0001 Project Established Palm Olein Oil This standard specifies the requirements of palm olein oil. Subsector : C01 Registration Date : TSE Turkey Project ID : t /0001 Project Established Palm Stearin Oil This standard specifies the requirements of palm stearin oil Subsector : C01 Registration Date : TSE

20 Turkey Project ID : tst89857/0001 Project Established Prerequisite programmes and design requirements for food safety in the manufacture and provision of food packaging This Publicly Available Specification (PAS) specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRPs) and design requirements to assist in controlling food safety hazards in the manufacture of food packaging. Page 20 Subsector C13: FERTILIZERS Subsector : C13 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM L 1080 Chemical analyses of soils - Determination of organic carbon by dry combustion with and without destroying of carbonate This ÖNORM describes a method of determination of organic carbon in ground. ** End of Sector **

21 Information procedure Page 21 Monthly Notifications Register Notifications registered at CCMC from to Sector F : FUNDAMENTAL STANDARDS Register issued on :

22 Subsector F02: UNITS & SYMBOLS Page 22 Subsector : F02 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM A 2730 Physical quantities - Use of the components of terms "constant", "coefficient", "modul", "number", "factor", "degree", "measure" and "level" This ÖNORM contains rules for the components of terms of physical quantities, for which no independent name exists. Subsector F07: DOCUMENTATION AND INFORMATION Subsector : F07 Registration Date : BSI United Kingdom Project ID : /0001 Project Established BS 8603 Wheelchair Passport Scheme: CoP BS 8603 Code of practice for wheelchair passport scheme Subsector : F07 Registration Date : NEN Netherlands Project ID : /0001 Project Established NEN 5509:2012 Concept nl User manuals - Contents, structure, formulation and presentation This standard gives minimal requirements for the informative contents and the structure of user manuals. The indications and recommendations apply to manuals, giving the user prescriptions, instructions and explanations for the installation, operation, use, treatment and maintenance of products, differing from household appliances to complicated systems. Subsector F15: MATERIAL TESTING IN GENERAL Subsector : F15 Registration Date : ASI Austria Project ID : /0001 Project Established ,

23 Page 23 ÖNORM M 3041 Training of personnel carrying out non-destructive testing (NDT personnel) This ÖNORM establishes a standardized system for the training of NDT personnel. It defines the levels of competence of NDT personnel according to ÖNORM EN ISO 9712, UIC-Kodex 960 V, ÖNORM EN 4179 und NAS 410 as well as the level of training required for this purpose and the required knowledge and skills. The standardized and organized training of NDT personnel creates a basis for a successful access to examinations and certifications in accordance with ÖNORM EN ISO 9712, UIC-Kodex 960 V, ÖNORM EN 4179 und NAS 410. This ÖNORM deals with qualification as far as organized training at a recognized training centre and in-house-training is concerned. Depending on the requirements to be met by NDT personnel, this ÖNORM shall apply to NDT levels 1, 2 and 3. Subsector : F15 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM M 3042 Qualification, certification, authorization and approval of personnel for non-destructive testing This ÖNORM defines the framework for the structure, the procedure, and the supervision of qualification examinations of levels 1 to 3 in accordance with ÖNORM EN ISO 9712, UIC- Kodex 960 V, ÖNORM EN 4179 und NAS 410. It defines a uniform mode of procedure for the grading of the examination and its documentation, including the issuing of the certificate for NDT personnel. Subsector F19: OPTICS Subsector : F19 Registration Date : DIN Germany Project ID : /0001 Project Established DIN Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2: Specimen for tactile procedures Subsector : F19 Registration Date : DIN Germany Project ID : /0001 Project Established DIN

24 Page 24 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3: Derivation of correction values for tactile measuring devices Subsector : F19 Registration Date : DIN Germany Project ID : /0001 Project Established Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 5: Derivation of correction values for optical measuring devices ** End of Sector **

25 Information procedure Page 25 Monthly Notifications Register Notifications registered at CCMC from to Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on :

26 Subsector H04: SPORTS EQUIPMENT Page 26 Subsector : H04 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM S 4740 Artificial climbing structures - Additional provisions to ÖNORM EN and ÖNORM EN This ÖNORM specifies additional provisions to ÖNORM EN and ÖNORM EN to make their application in practice easier. The additional provisions relate to the design of the climbing walls, mats for bouldering and the determination of the maximum number of simultaneous climbing people. Subsector H25: LARGE GAS APPLIANCES Subsector : H25 Registration Date : NEN Netherlands Project ID : /0001 Project Established NPR 2578:2012 Concept nl Management and maintenance of LPG, propane and butane installations This code of practice gives indications for the installation and use of LPG installations in the Netherlands in accordance to NEN-EN and NEN-EN with a maximum capacity of 40 m3 ** End of Sector **

27 Information procedure Page 27 Monthly Notifications Register Notifications registered at CCMC from to Sector I : MECHANICAL ENGINEERING Register issued on :

28 Subsector I01: SCREW THREADS Page 28 Subsector : I01 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM ISO 2901 ISO metric trapezoidal screw threads - Basic profile and maximum material profiles This International Standard specifies the basic profile and maximum material profiles of ISO metric trapezoidal screw threads. Subsector : I01 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM ISO 2903 ISO metric trapezoidal screw threads - Tolerances This International Standard specifies a tolerance system for metric trapezoidal screw threads in accordance with ISO The tolerances refer to the basic profile ISO The tolerance system does not apply to trapezoidal screw threads with special requirements on axial displacement, for example lead screws. Subsector I02: FASTENERS Subsector : I02 Registration Date : BSI United Kingdom Project ID : /0001 Project Established BS 4A104 Spec for corrosion-resisting bo Draft BS 4A 104+A2 Specification for corrosion-resisting steel bolts (Unified hexagons andunified threads) for aircraft Subsector : I02 Registration Date : BSI United Kingdom Project ID : /0001 Project Established BS 4A114 Specification for corrosion-res Draft BS BS 4A114 Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength a class 880/1080)

29 Page 29 Subsector : I02 Registration Date : DIN Germany Project ID : /0001 Project Established Hexagon fit bolts with hexagon nut for steel structures Subsector : I02 Registration Date : DIN Germany Project ID : /0001 Project Established Slotted countersunk head bolts with hexagon nut for steel structures Subsector : I02 Registration Date : DIN Germany Project ID : /0001 Project Established Hexagon head bolts with hexagon nut for steel structures Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY Subsector : I15 Registration Date : EVS Estonia Project ID : /0001 Project Established project Liquid fuels - Manual Measurement and Calculation of Liquid Fuel Quantities - Upright Cylindrical Tanks This standard gives guidance on manual tank gauging of level and temperature of liquid fuels. It also gives guidance on calculations of standard volume and mass of the liquid fuels, based on obtained measurement results and appropriate correction factors. Guidance on measurement uncertainty evaluation is included. This standard is applicable to the use on

30 Page 30 upright cylindrical tanks. Subsector I16: INTERNAL COMBUSTION ENGINES Subsector : I16 Registration Date : NEN Netherlands Project ID : /0001 Project Established NEN 7988:2012 Concept nl Reciprocal-engines for industrial proces and commercial buildings - Safety requirements for combustion and fuel handling systems This standard specifies safety requirements for reciprocal engines that are part of industrial or CHP-systems in commercial buildings. This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IRE as listed in Clause 4, when used as intended and under conditions foreseen by the manufacturer. Subsector I18: MINING Subsector : I18 Registration Date : DIN Germany Project ID : /0001 Project Established Mine plans - Technical facilities Subsector I19: NUCLEAR ENERGY Subsector : I19 Registration Date : UNI Italy Project ID : /0001 Project Established U Loads of scrap metal - Radionuclide detection by X and gamma measurements The standard identifies the methods to determine the radiometric anomalies associated with radionuclides present in the loads of metals for recovery. The scrap metal for recovery in the foundry may contain radioisotopes from radioactive sources used in industrial and medical applications. This radiation can cause contamination of the environment and end

31 Page 31 products. REV/AMD UNI 10897:2001 Subsector : I19 Registration Date : UNI Italy Project ID : /0001 Project Established U Radiation Protection - Steel quality - Determination of the content of tritium activity in steel and aluminum samples by liquid scintillation Decommissioning of nuclear power plant facilities and free release of materials coming from dismantling operations imply the necessity of verifying compliance of the radioactivity content of materials with the authorized limits, in terms of mass and activity concentration. In the inventory of radioisotopes present in a NPP we find tritium (3H), which is produced during reactor operation both by activation and by ternary fission. Tritium is a non directly measurable radionuclide, so its concentration has to be determined by radiochemical analysis in a laboratory, preliminarily to free release operations. The method here proposed is applied to carbon steel and aluminium and is based on the dissolution of the sample in a persulfate sodium solution, followed by distillation an liquid scintillation counting. The method allows to reach minimum detectable concentrations of the order of 0,01 Bq/g, which are perfectly suitable for decommissioning applications. The good performance of the method, in terms of sensitivity, reproducibility and robustness, has been experimentally tested through an intercomparison among different laboratories taking part in the Working Group having the task of producing this standard; the intercomparison consisted in analizing samples coming from the same highly tritium contaminated drain line, taken from the Italian Latina NPP and comparing the results and the associated uncertainties. REV/AMD UNI 10897:2001 Subsector I34: NON-FERROUS METALLIC PIPES Subsector : I34 Registration Date : DIN Germany Project ID : /0001 Project Established Clamping plates for the suspension of pipes on I and IPB beams ** End of Sector **

32 Information procedure Page 32 Monthly Notifications Register Notifications registered at CCMC from to Sector M : METALLIC MATERIALS Register issued on :

33 Subsector M01: STEEL Page 33 Subsector : M01 Registration Date : BSI United Kingdom Project ID : /0002 Draft for public enquiry BS W 13 + A1 BS W13 AMD1. Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths) Subsector M99: UNDETERMINED Subsector : M99 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : Project ID : /0001 Project Established prlvs Steel for reinforcement of concrete - Part 1: Weldable and non-weldable bars, coils and decoiled products - Specification and evaluation of conformity This standard Standard specifies requirements for the performance characteristics of weldable reinforcing steel used for the reinforcement of concrete structures and refers to the stability of concrete structures REV/AMD LVS 191-1:2007 ** End of Sector **

34 Information procedure Page 34 Monthly Notifications Register Notifications registered at CCMC from to Sector N : NON-METALLIC MATERIALS Register issued on :

35 Subsector N01: PAPER AND BOARD Page 35 Subsector : N01 Registration Date : TSE Turkey Project ID : t /0001 Project Established Paper Towels This standard covers paper towels mode of craped tissue paper. It doesn't cover other tissue papers and towels mode of textured and knitted fabrics. Subsector N05: TEXTILES Subsector : N05 Registration Date : TSE Turkey Project ID : tst07167/0001 Project Established Spring interıor mattress This standard covers spring interior matterss International : Modified ASTM F1566:2009 Subsector : N05 Registration Date : TSE Turkey Project ID : tst09364/0001 Project Established Polyurethane - Mattress This standard covers the specifications of mattresses made of polyurethane for domestic use. European : Modified BS :1999 Subsector N06: RUBBER Subsector : N06 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry PNE Elastomers. Methods of testing rubber O-Rings

36 This standard specifies the procedures to determine the physical properties of rubber O- rings and changes such properties caused by ageing, excluding the ones under EN 681 Page 36 REV/AMD UNE 53614:1986, UNE 53614/1M:2001 Subsector N09: PLASTICS Subsector : N09 Registration Date : DIN Germany Project ID : /0001 Project Established Thermoplastic water stops for sealing joints in in-situ concrete - Part 2: Material requirements, testing and inspection Subsector : N09 Registration Date : DIN Germany Project ID : /0001 Project Established Termoplastic water stops for sealing joints in in-situ concrete - Part 1: Terms and definitions, shapes, dimensions, marking Subsector N14: PLASTICS PIPES Subsector : N14 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0001 Draft for public enquiry PNE Plastics. Thermoplastics and thermoplastic reinforced with steel strip pipes and fittings for drainage for drainage in building and civil engineering and agricultural drainage This standard applies to thermoplastics and thermoplastic reinforced with steel strip piping systems for building and civil engineering subsoil drainage and agricultural drainage REV/AMD UNE 53994:2011 Subsector N19: TAPES

37 Page 37 Subsector : N19 Registration Date : DIN Germany Project ID : /0001 Project Established Structural adhesives - Testing of adhesively bonded joints - Grub peel test Subsector N21: GASEOUS FUELS AND COMBUSTIBLE GAS Subsector : N21 Registration Date : SUTN Slovakia Project ID : /0001 Project Established STN Liquefied petroleum gases. Heating gases. Propane, Butane and their mixtures. Requirements and test methods Revised standard will relate to requirements for quality and test methods for propane, butane and their mixtures as heating gases. REV/AMD STN , STN , STN , STN ** End of Sector **

38 Information procedure Page 38 Monthly Notifications Register Notifications registered at CCMC from to Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on :

39 Subsector S01: ACOUSTICS AND SOUND INSULATION Page 39 Subsector : S01 Registration Date : DIN Germany Project ID : /0001 Project Established Testing of acoustics in buildings - Airborne impact and sound insulation - Measurement of level difference Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT Subsector : S04 Registration Date : UNI Italy Project ID : 5002B590/0001 Project Established U5002B590 Personal protective equipment - Guidelines for selection and use of personal protective equipment used for wildland firefighting This standard defines a method for selection of personal protective equipment for wild land fire-fighters, and provides instructions so that the use, care and maintenance are carried out in such a way as the devices are kept in a state of efficiency for all the time of the service life. This standard also provides guidance on the documentation supplied with the PPE. This standard is intended for operators involved in wild land fire fighting operations and does not apply to other types of fires and the activities carried out by the National Corps of fire-fighters. REV/AMD UNI 11047:2003 Subsector S08: AIR QUALITY Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of 4,4'-methylenebis(2-chloroaniline) in workplaces by high performance liquid chromatography This standard gives a method for the determination of the content of 4,4'-methylenebis(2- chloroaniline) ( CAS: ) in workplace air by high performance liquid chromatography. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 4,4' -methylenebis(2-chloroaniline) which can be determined by the method in the sampling and determination conditions specified in the standard is 2 ug/m3

40 Page 40 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of 4-aminobiphenyl in workplaces by high performance liquid chromatography This standard gives a method for the determination of the content of 4-aminobiphenyl ( CAS: ) in workplace air by high performance liquid chromatography. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 4-aminobiphenyl which can be determined by the method in the sampling and determination conditions specified in the standard is 0,1 ug/m3 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of 2-methylaziridine in workplaces by high performance liquid chromatography This standard gives a method for the determination of the content of 2-methylaziridine ( CAS: ) in workplace air by high performance liquid chromatography. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 2-methylaziridine which can be determined by the method in the sampling and determination conditions specified in the standard is 0,47 mg/m3 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of aziridine in workplaces by high performance liquid chromatography This standard gives a method for the determination of the content of aziridine ( CAS: ) in workplace air by high performance liquid chromatography. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of aziridine which can be determined by the method in the sampling and determination conditions specified in the standard is 0,062 mg/m3

41 Page 41 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of 2-ethylhexan-1-ol in workplaces by gas chromatography This standard gives a method for the determination of the content of 2-ethylhexan-1-ol (CAS: ) in workplace air by gas chromatographic with a flame ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 2-ethylhexan-1-ol which can be determined by the method in the sampling and determination conditions specified in the standard is 16 mg/m3 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of nitroethane in workplaces by gas chromatography This standard gives a method for the determination of the content of nitroethane (CAS: ) in workplace air by gas chromatography with a flame ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of nitroethane which can be determined by the method in the sampling and determination conditions specified in the standard is 7,5 mg/m3 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of calcium oxide in work places by flame atomic absorption spectrometry This standard gives a method for the determination of the content of calcium oxide ( CAS: ) in workplace air by flame atomic absorption spectrometry. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of calcium oxide which can be determined by the method in the sampling and determination conditions specified in the standard is 0,12 mg/m3 (for air volume 720 l)

42 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Determination of 1,2,3 trichloropropane in workplaces by gas chromatography Gives the method consists in the adsorption of trichloropropane vapour on activated charcoal, desorption of the compound with carbon disulfide and determination of the obtained solution by gas chromatography. The lowest concentration of trichloropropane which can be determined by this method is 6 mg/m3 Page 42 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Tests for content of cadmium and its compounds -- Part 3: Determination of cadmium and its compounds in work places by flame atomic absorption spectrometry This standard gives a method for the determination of the content of cadmium ( CAS: ) and its compounds in workplace air by flame atomic absorption spectrometry. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of cadmium which can be determined by the method in the sampling and determination conditions specified in the standard is 0,001 mg/m3 Subsector : S08 Registration Date : PKN Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Tests for phosphorus and its compounds content -- Determination of phosphorus trichloride in work places by spectrophotometry in a visible region This standard gives a method for the determination of the content of phosphorus trichloride ( CAS: ) in workplace air by spectrophotometry in a visible region. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of phosphorus trichloride which can be determined by the method in the sampling and determination conditions specified in the standard is 0,1 mg/m3 Subsector : S08 Registration Date : PKN

43 Page 43 Poland Project ID : /0001 Project Established prpn-z Air purity protection -- Tests for phosphorus and its compounds content -- Determination of phosphorus pentachloride in work places by spectrophotometry in a visible region This standard gives a method for the determination of the content of phosphorus pentachloride ( CAS: ) in workplace air by spectrophotometry in a visible region. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of phosphorus pentachloride which can be determined by the method in the sampling and determination conditions specified in the standard is 0,07 mg/m3 Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : S09 Registration Date : DIN Germany Project ID : /0001 Project Established German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45) Subsector : S09 Registration Date : DIN Germany Project ID : /0001 Project Established Soil quality - Field tests - Part 7: Determination of infiltration rate by double ring infiltrometer Subsector : S09 Registration Date : NEN Netherlands Project ID : /0001 Project Established , NTA 8379:2012 Concept en Water quality - Guidelines for the identification of target compounds by chromatography and mass spectrometry This technical agreement gives criteria for mass spectrometric identification of target compounds in water samples and may be applied to environmental samples in general. This