CEN System - Delegated Decisions Dispatch 34:2017
|
|
- Norah Bradley
- 5 years ago
- Views:
Transcription
1 Page 1 CEN System - Delegated Decisions Dispatch 34: CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC 19 Decision CEN/TC 19 03/2017 taken on Subject: Adoption of a New Work Item CEN/TC 19 - Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin. 19 N Deliverable TR The revision of a CEN/TR CEN/TR 15993:2013 CEN/TC 19/WG 21 - Specification for unleaded petrol
2 Page 2 4. Title Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination 5. Scope This Technical Report explains the requirements and test methods for marketed and delivered ethanol (E85) automotive fuel according to EN It provides background information to judge the text of the standard and gives guidance and explanations to the producers, blenders, marketers and users of ethanol (E85) automotive fuel. It also includes a summary of the investigations and interlaboratory studies executed and the discussions entertained by CEN that have led to the effective fuel specification. NOTE 1 This document is directly related to the pending revision of CEN/TS NOTE 2 For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, respectively. aspects aspects? 8. Vienna Agreement 9. The project is linked to Other: This is a TR and therefore doesn't solve or address specific aspects Other: not applicable or expected CEN lead document from another organization 10. Track Vote on TS/TR by correspondence 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SFS SIS BSI NBN UNI NEN 14. The decision Simple majority (min. 55% as from ) Number of positive votes: 21 Number of abstentions: 13
3 Page 3 2 CEN/TC 54 Decision CEN/TC 54 6/2017 taken on Subject: Adoption of a New Work Item CEN/TC 54 - Unfired pressure vessels 54 N Deliverable EN An amendment to an EN EN :2014 CEN/TC 54/WG 55 - E - Inspection and testing 4. Title Unfired pressure vessels - Part 5: Inspection and testing 5. Scope This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN :2014. Special provisions for cyclic operation are given in Annex G of this Part. Special provisions for vessels or vessel parts ing in the creep range are given in Annex F and Annex I of this Part. NOTE The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR aspects aspects? Emissions to air Use of checklist 8. Vienna or expected CEN lead
4 Page 4 Agreement 9. The project is linked to document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/071 Yes Directive reference For citation in Official journal 2014/68/EU Yes 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR BSI DIN UNI NEN 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before , min. 65% from ):100 Number of positive votes: 14 Number of abstentions: 9 3 CEN/TC 88 Decision CEN/TC c/2017 taken on Subject: 3 year time-frame for the development of WI month Tolerance Request. CEN/TC 88 - Thermal insulating materials and products considering Resolution BT 34/2002 by which BT decided that any item to result in an EN, registered after , shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes; considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, to claim one tolerance of 9 months, applicable to the target dates for submission of a draft to CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA); considering that for item Thermal insulation products for buildings - External thermal insulation composite systems with renders (ETICS) - Specification, it proves impossible to Dispatch ENQ draft to CMC by ; claims a tolerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons:
5 Further time is needed to solve all the comments received during the internal commenting period. Page 5 confirms that CEN/TC 88 will Dispatch ENQ draft to CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by at the latest. The decision simple majority with 15 positive vote(s), 0 negative vote(s) and 8 abstention(s). 4 CEN/TC 112 Decision CEN/TC /2017 taken on Subject: Adoption of a New Work Item CEN/TC 112 Wood-based panels 112 N Deliverable EN The revision of an EN EN 622-4:2009 CEN/TC 112/WG 11 - Particleboards and fibreboards 4. Title Fibreboards - Specifications - Part 4: Requirements for softboards 5. Scope This European Standard specifies the requirements for softboards as defined in EN 316, with a density kg/m3 to 400 kg/m3. The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations. aspects Emissions to air
6 Page 6 aspects? 8. Vienna Agreement 9. The project is linked to Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR ASI SNV DIN NBN 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before , min. 65% from ):100 Number of positive votes: 16 Number of abstentions: 6 5 CEN/TC 147 Decision CEN/TC /2017 taken on Subject: Adoption of a New Work Item CEN/TC Cranes - Safety 147 N 1055
7 Page 7 1. Deliverable EN The revision of an EN EN 12999:2011/A2:2017 CEN/TC 147/WG 18 - Loader cranes 4. Title Cranes - Loader cranes 5. Scope This European Standard specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations. aspects aspects? 8. Vienna Agreement 9. The project is linked to This European Standard does not apply to loader cranes used on board seagoing vessel or to articulated boom systems which are designed as total integral parts of special equipment such as forwarders. The hazards covered by this standard are identified in Clause 4. This European Standard does not cover hazards related to the lifting of persons Emissions to air Heat ise/vibration Use of energy Use of land Use of materials Waste Risk to the environment from accidents/misuse Bring in expertise to the WG Use of checklist or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/396 Yes Directive reference For citation in Official journal
8 Page /42/EC Yes 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SIS DIN DS UNI NEN 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before , min. 65% from ):91.67 Number of positive votes: 12 Number of negative votes: 1 Number of abstentions: 11 6 CEN/TC 169 Decision CEN/TC /2017 taken on Subject: Adoption of a Preliminary Work Item CEN/TC Light and lighting 169 N Deliverable TR A new TR CEN/TC 169/WG 3 - Emergency lighting in buildings 4. Title Guidance tes on the use of dynamic signage systems
9 Page 9 5. Scope Emergency lighting which is designed to operate when the supply to the normal lighting fails. There is a need for a system that can cope with changing conditions such as the presence of fire, smoke or other dangers to provide a system that enables people to use safe escape routes not only during supply failures but at all times the premises are occupied. Furthermore, such systems can also indicate escape routes which should not be used to avoid dangers. There are systems that can receive signals from detectors and human intervention that can automatically activate emergency escape signage-s to direct people to safe areas and indicate the routes that are not fit for use. Such systems are called dynamic signage systems (DSS). The purpose of this CEN Technical Report is to give guidance to the design considerations of DSS. aspects - OPTIONAL aspects? - OPTIONAL 8. Track Vote on TS/TR by correspondence 9. Related 10. Related 11. The decision Simple majority Number of positive votes: 17 Number of abstentions: 7 7 CEN/TC 191 Decision CEN/TC /2017 taken on Subject: Adoption of a New Work Item CEN/TC Fixed firefighting systems 191 N 1396
10 Page Deliverable EN An amendment to an EN EN 16750:2017 CEN/TC 191/WG 6 - Gas extinguishing Systems and components 4. Title Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance 5. Scope This European standard specifies oxygen reduction systems that are used as fire prevention systems by creating an atmosphere in an area which is having a lower permanent oxygen concentration as in ambient conditions. The level of oxygen reduction is defined by the individual risks of these areas (see Annex A). Oxygen reduction is achieved by technical systems which are providing a flux of air containing a reduced concentration of oxygen. This European standard specifies minimum requirements and defines the specifications governing the design, installation and maintenance of fixed oxygen reduction systems with oxygen reduced air in buildings and industrial production plants. The standard also applies to the extension and modification of existing systems. This European standard applies to oxygen reduction systems using nitrogen which are designed for continual oxygen reduction in enclosed spaces. NOTE Nitrogen is today the most suitable gas to be used for oxygen reduction. For other gases this European standard can be used as basis. This European standard does not apply to oxygen reduction systems that use water mist or combustion gases. The European standard does not apply to: - explosion suppression systems; - explosion prevention systems; - fire extinguishing systems using gaseous extinguishing agents; - inertization of portable containers; - systems in which oxygen levels are reduced for reasons other than fire prevention (e.g. steel processing in the presence of inert gas to avoid the formation of oxide film); - inerting required during repair on systems or equipment (e.g. welding) in order to eliminate the risk of fire or explosion. In addition to the conditions for the actual oxygen reduction system and its individual components this European standard also covers certain structural specifications for the protected area.
11 Page 11 The space protected by an oxygen reduction system is a controlled and continuously monitored indoor climate for extended occupation. This standard does not cover unventilated confined spaces that may contain hazardous gases. aspects aspects? 8. Vienna Agreement 9. The project is linked to Emissions to air Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SFS ASI SIS SN BSI DIN UNI NEN ILNAS 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before , min. 65% from ):100 Number of positive votes: 18 Number of abstentions: 6
12 8 CEN/TC 193 Decision CEN/TC 193 4C/2017 taken on Subject: Adoption of a Preliminary Work Item CEN/TC Adhesives Page N Deliverable EN A new project CEN/TC 193/SC 1/WG 12 - Adhesives for non-loadbearing timber structures 4. Title Classification of wood adhesives for non-structural timber products for exterior use 5. Scope To be provided aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related
13 Page The decision Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC 193 4D/2017 taken on Subject: Adoption of a Preliminary Work Item CEN/TC Adhesives 193 N Deliverable EN A new project CEN/TC 193/SC 1/WG 6 - Test methods and requirements for adhesives for glued-in rods and on-site repair of load-bearing structures 4. Title Adhesives - Epoxy resins for load bearing timber structures - Classification and performance requirements 5. Scope To be provided aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related
14 Page Related 11. The decision Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC 193 5A/2017 taken on Subject: Adoption of a Preliminary Work Item CEN/TC Adhesives 193 N Deliverable EN The revision of an EN EN 14259:2003 CEN/TC 193/WG 4 - Building adhesives 4. Title Adhesives for floor coverings - Requirements for mechanical and electrical performance 5. Scope This European Standard specifies performance requirements of an adhesive when tested to a standard method with a characteristic type of floor covering. The values defined in this standard are considered to indicate a general suitability for use of an adhesive with the corresponding group of floor coverings. This standard can also be used for the evaluation of a particular floor covering with the corresponding type of adhesive. This standard does not contain criteria or recommendations for the practical installation of floor coverings. The values given in this standard also do not guarantee the complete functionality of combinations of adhesives and floor coverings in practical application.
15 Page 15 aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related 11. The decision Yes Directive reference For citation in Official journal 305/2011 Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC /2017 taken on Subject: Adoption of a Preliminary Work Item CEN/TC Adhesives 193 N Deliverable EN The revision of an EN EN 14293:2006 CEN/TC 193/WG 4 - Building adhesives
16 Page Title Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements 5. Scope This European Standard specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength and tensile strength to be achieved with these adhesives, as well as a method for determining the open time. there are two different test methods and different minimum requirements for determing the shear strength for hard and soft adhesives. This Standard does not refer to the selection and installation of parquet floorings. aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related 11. The decision Simple majority Number of positive votes: 7 Number of abstentions: 0 Decision CEN/TC bis/2017 taken on Subject: Adoption of a Preliminary Work Item CEN/TC Adhesives 193 N 1998
17 Page Deliverable EN A new project CEN/TC 193/SC 1/WG 12 - Adhesives for non-loadbearing timber structures 4. Title Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading 5. Scope This European Standard specifies a method for adhesives for wood and derived solid wood products for determining the shear strength and wood failure percentage of wood-to-wood adhesive bonds loaded in compression. These parameters allow to define different ing properties of adhesives (e.g. final bond strength, pressing time, closed assembly time). aspects - OPTIONAL aspects? - OPTIONAL 8. Track Enquiry + Formal Vote (ENQ+FV) 9. Related 10. Related 11. The decision Simple majority Number of positive votes: 9 Number of abstentions: 11
18 9 CEN/TC 227 Decision CEN/TC /2017 taken on Subject: Adoption of a New Work Item CEN/TC Road materials Page N Deliverable EN The revision of an EN EN :2007 CEN/TC 227/WG 1 - Bituminous mixtures 4. Title Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor 5. Scope This European Standard specifies the method for compaction of cylindrical specimens of bituminous mixtures using a gyratory compactor. Such compaction is achieved by combining a rotary shearing action and a vertical resultant force applied by a mechanical head. The method is used for: - determination of the air voids content of a mixture for a given number of gyrations or derivation of a curve density (or void content) versus number of gyrations; - preparation of specimens of given height and/or at a predetermined density, for subsequent testing of their mechanical properties. Annex A, Annex B and/or Annex C describe method of complying for the equipment This European Standard applies to bituminous mixtures (both those made up in laboratory and those resulting from site sampling), with an upper aggregate size not larger than 31,5 mm. Use of energy
19 Page 19 aspects aspects? 8. Vienna Agreement 9. The project is linked to Use of materials Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/124 Yes Directive reference For citation in Official journal 305/ Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SIS SN BSI SNV DIN NBN UNI EVS 14. The decision Simple majority (min. 55% as from ) Number of positive votes: 17 Number of abstentions: 10 Decision CEN/TC /2017 taken on Subject: Adoption of a New Work Item CEN/TC Road materials 227 N 2872
20 Page Deliverable EN The revision of an EN EN :2003+A1:2007 CEN/TC 227/WG 1 - Bituminous mixtures 4. Title Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor 5. Scope This European Standard describes a test method for the preparation of bituminous test specimens using a vibratory compaction technique. This European Standard is applicable to loose mixtures and cores and is used to establish a refusal density for a bituminous mixture, or to determine the ease of compaction as described in EN If the mixture has been reheated, the specimen shall not be used for determining further mechanical characteristics. aspects aspects? 8. Vienna Agreement 9. The project is linked to Use of energy Use of materials Bring in expertise to the WG or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/124 Yes Directive reference For citation in Official journal 305/ Commitment The following CEN members (at least five) are committed to participate in the development of the project: SIS SN BSI DIN
21 Page 21 NBN UNI 14. The decision Simple majority (min. 55% as from ) Number of positive votes: 15 Number of abstentions: CEN/TC 251 DECISION 1109 taken by CEN/TC 251 on Subject: CEN/TC 251 Participation of HL7 International Foundation The CEN/TC 251 Health informatics. considering the CEN/CENELEC Internal Regulations - Part 2, subclause 4.3.2, which lays down the conditions for external liaisons; considering that the conditions laid down in CEN-CENELEC Guide 25 The concept of partnership with European organizations and other stakeholders are fulfilled; agrees to the participation of the HL7 International Foundation in CEN/TC 251; requests the CEN-CENELEC Management Centre to inform the HL7 International Foundation accordingly of this decision. The decision simple majority with 8 positive votes, 0 negative vote(s) and 16 abstentions. 11 CEN/TC 252 Decision CEN/TC a/2017 taken on Subject: Adoption of a New Work Item CEN/TC Child care articles 252 N 1528
22 Page Deliverable TR The revision of a CEN/TR CEN/TR :2015 CEN/TC 252/WG 6 - General and common safety specifications 4. Title Child use and care articles - General safety guidelines - Part 2: Chemical hazards 5. Scope This document provides guidance information on chemical hazards that should be taken into consideration when developing safety standards for child use and care articles. In addition, these guidelines can assist those with a general professional interest in child safety. aspects aspects? 8. Vienna Agreement 9. The project is linked to ne of the above: TR Other: NA or expected CEN lead document from another organization 10. Track Vote on TS/TR by correspondence 11. Related 12. Related 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: ASI SIS BSI DIN UNI 14. The decision Simple majority (min. 55% as from ) Number of positive votes: 12 Number of abstentions: 10
23 12 CEN/TC 256 Decision CEN/TC 256 C23/2017 taken on Subject: Activation of preliminary Work Item CEN/TC Railway applications Page 23 having considered the proposal for the activation of item currently registered at preliminary stage as documented in CEN/TC 256 N Deliverable EN A new project CEN/TC 256/WG 3 - Acoustics 4. Title Railway applications - Acoustics - Measuring of door audible warnings 5. Scope This European standard describes the type test assessment method for acoustic signals at passenger external doors applying to rolling stock. The following applies to this standard: - this standard refers to acoustical passenger information indicating the release, opening and closing of passenger doors; - this standard is applicable to tonal signals with defined frequency components; - this standard is not applicable to spoken information. NOTE 1 Acoustic door signals in terms of TSI compliance are defined in EN "Design for PRM use". NOTE 2 Acoustic doors signals in terms of door system function are described in EN aspects aspects? Use of energy Bring in expertise to the WG
24 Page Vienna Agreement 9. The project is linked to or expected CEN lead document from another organization 10. Track Enquiry + Formal Vote (ENQ+FV) 11. Related 12. Related Yes M/483 Yes Directive reference For citation in Official journal 2008/57/EC Yes 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR LST BSI SNV DIN UNE UNI NEN HZN IPQ 14. The decision Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before , min. 65% from ):100 Number of positive votes: 10 Number of abstentions: CEN/TC 260 Decision CEN/TC 260 C661/2017 taken on Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher CEN/TC 260 Fertilizers and liming materials having received and agreed upon the reasons why harmonization is no longer needed; considering that the item(s) are neither mandated nor covered by an Order Voucher; noting the consequences of release of standstill; decides to delete the following item(s):
25 Page 25 WI pren Fertilizers - Determination of the water-soluble potassium content and decides to release the standstill on these item(s). The decision simple majority with 9 positive vote(s), 0 negative vote(s) and 9 abstention(s). 14 CEN/TC 278 Decision CEN/TC /2017 taken on Subject: CEN/TC Splitting of existing item CEN/TC 278 Intelligent transport systems considering the CEN/CENELEC Internal Regulations - Part 3, clause 5, which lay down the provisions for the division of subjects to be standardized; considering the urgent and exceptional need for splitting a item; confirming that the resources needed to achieve the are committed; confirming that the scopes of the new items resulting from the splitting are strictly within the scope of the original item; decides to split the WI Intelligent transport systems - esafety - extending ecall to other classes of vehicle - into 5 parts, with the following titles and tracks: Title: Intelligent transport systems - esafety - Part 1: extending ecall to other categories of vehicle Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Title: Intelligent transport systems - esafety - Part 2: ecall for HGVs and other commercial vehicles Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence Title: Intelligent transport systems - esafety - Part 3: ecall for coaches and busses Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence Title: Intelligent transport systems - esafety - Part 4: ecall for UNECE Category T, R, S agricultural/forestry vehicles Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence
26 Page 26 Title: Intelligent transport systems - esafety - Part 5: ecall for UNECE Category L1 and L3 powered two wheel vehicles (vehicle based) Scope: The scope of this project is to extend ecall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence The decision simple majority with 11 positive vote(s), 0 negative vote(s) and 10 abstention(s). 15 CEN/TC 444 Decision CEN/TC /2017 taken on Subject: Adoption of a New Work Item CEN/TC Test methods for characterization of solid matrices 444 N Deliverable TR A new TR CEN/TC 444/WG 3 - Inorganic analysis 4. Title Waste - State-of-the-art document - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection 5. Scope This technical report provides a supplementary description of the oxidative pyrohydrolytic combustion technique followed by ion chromatography detection for the determination of halogens and sulfur in waste samples. aspects Waste Bring in expertise to the WG
27 Page 27 aspects? 8. Vienna Agreement 9. The project is linked to or expected CEN lead document from another organization 10. Track Vote on TS/TR by correspondence 11. Related 12. Related Yes Directive reference For citation in Official journal 99/31/EC 2000/76/EC 13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SFS SNV DIN NBN NEN UNMZ 14. The decision Simple majority (min. 55% as from ) Number of positive votes: 12 Number of abstentions: 10
CEN System - Delegated Decisions Dispatch 39:2016
2016-09-26 Page 1 CEN System - Delegated Decisions Dispatch 39:2016 1 CEN/TC 104... 1 2 CEN/TC 122... 3 3 CEN/TC 134... 6 4 CEN/TC 136... 7 5 CEN/TC 144... 8 6 CEN/TC 150... 8 7 CEN/TC 153... 9 8 CEN/TC
More informationCEN System Delegated Decisions Dispatch 33:2016
2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5
More informationCEN System - Delegated Decisions Dispatch 22:2017
2017-05-29 Page 1 CEN System - Delegated Decisions Dispatch 22:2017 1 CEN/TC 19... 1 2 CEN/TC 33... 4 3 CEN/TC 128... 6 4 CEN/TC 155... 8 5 CEN/TC 169... 12 6 CEN/TC 183... 13 7 CEN/TC 250... 20 8 CEN/TC
More informationCEN System - Delegated Decisions Dispatch 14:2017
2017-04-03 Page 1 CEN System - Delegated Decisions Dispatch 14:2017 1 CEN/TC 33... 1 2 CEN/TC 52... 4 3 CEN/TC 53... 5 4 CEN/TC 72... 6 5 CEN/TC 123... 7 6 CEN/TC 129... 8 7 CEN/TC 155... 11 8 CEN/TC 161...
More informationCEN System - Delegated Decisions Dispatch 23:2017
CEN System - Delegated Decisions Dispatch 23:2017 DDD 23 2017 2017-06-05 Page 1 1 CEN/TC 10... 1 2 CEN/TC 19... 3 3 CEN/TC 47... 4 4 CEN/TC 69... 6 5 CEN/TC 104... 7 6 CEN/TC 107... 8 7 CEN/TC 124... 20
More informationCEN System - Delegated Decisions Dispatch 9:2017
CEN System - Delegated Decisions Dispatch 9:2017 DDD 9 2017 2017-02-27 Page 1 CEN/TC 19... 1 CEN/TC 54... 5 CEN/TC 89... 6 CEN/TC 102... 8 CEN/TC 136... 10 CEN/TC 140... 12 CEN/TC 150... 16 CEN/TC 155...
More informationCEN System - Delegated Decisions Dispatch 41:2016
2016-10-10 Page 1 CEN System - Delegated Decisions Dispatch 41:2016 1 CEN/CLC JWG 9... 1 2 CEN/TC 122... 2 3 CEN/TC 130... 3 4 CEN/TC 142... 5 5 CEN/TC 151... 5 6 CEN/TC 163... 6 7 CEN/TC 180... 22 8 CEN/TC
More informationCEN System - Delegated Decisions Dispatch 16:2018
2018-04-16 Page 1 CEN System - Delegated Decisions Dispatch 16:2018 1 CEN/TC 10... 1 2 CEN/TC 33... 2 3 CEN/TC 102... 6 4 CEN/TC 132... 9 5 CEN/TC 140... 15 6 CEN/TC 153... 15 7 CEN/TC 155... 16 8 CEN/TC
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationDoc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)
«Industrial piping and pipelines» CEN/TC 67 Date: 016-09-7 Assistant: Patricia DUFOUR Direct line: + (0)1 7 17 67 8 p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0)1
More informationBUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS CEN/TC 191 Business Plan Date: 2005-09-07 Version: 2 Approved BP Page: 1 EXECUTIVE SUMMARY Business Environment TC191 is responsible for standardization
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationCEN/TC 207 N N Work programme May Document type: Other committee document. Date of document:
CEN/TC 207 N 1646 CEN/TC 207 Furniture Email of secretary: fabrizio.tacca@uni.com Secretariat: UNI (Italy) N 1646 - Work programme May 2016 Document type: Other committee document Date of document: 2016-05-05
More informationCEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
More informationReport on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
More informationcooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
More informationCEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationBUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices
Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15627 December 2007 AGREEMENT ICS 77.040.10 Supersedes CWA 15627:2006 English version Small Punch Test Method for Metallic Materials This CEN Workshop Agreement has been drafted and approved
More informationSecurity Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More informationA Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
More informationBUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY The business environment relevant for the work of the CEN/TC includes - The entire industry involved
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationBUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9311-2 Second edition 2011-08-15 Adhesives for thermoplastic piping systems Part 2: Determination of shear strength Adhésifs pour réseaux de tuyauteries
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationBUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY
Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 530 Rev.2 2012-04-13 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 Drafting
More informationCEN/TC 275. Secretariat of CEN/TC 275. Resolutions of the 16 th meeting of CEN/TC 275 in Berlin on 3 rd and 4 th July 2006
2006-07-24 CEN/TC 275 N 0360 "Food analysis Horizontal methods" Secretariat of CEN/TC 275 Carola Seiler DIN Deutsches Institut für Normung e.v. D-10772 Berlin International +49 30 26 01-21 98 International
More informationBUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
More informationRequest for tender regarding the validation of ammonia testing methods as supplement to pren 16516
Secretariat: Nederlands Normalisatie-instituut doc.nr. Vlinderweg 6 P.O. Box 5059 2623 AX DELFT 2600 GB DELFT date The Netherlands The Netherlands 2015-10-01 Telephone: +31 15 2 690 280 CEN/TC 351 N 0644
More informationBUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY CEN/TC 231 Business Plan Page: 1 In Europe, a large number of machines generating exposure to mechanical hand-arm-vibration
More informationRelevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
More informationBUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationStandardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationSingle Market : regulatory environment, standardisation and New Approach Pressure equipment, medical devices, metrology M/327
EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Single Market : regulatory environment, standardisation and New Approach Pressure equipment, medical devices, metrology Committee on Standards and Technical
More informationDraft Business Plan of CEN/TC Potentially explosive atmospheres - Explosion prevention and protection
Page: 1 Draft Business Plan of - Potentially explosive atmospheres - Explosion prevention and protection Introduction CEN Technical Committees and Business Planning The extension of formal business planning
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-29-2 Edition 2.0 2015-03 Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen INTERNATIONAL
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationCEN TC 10 (Lifts, escalators and moving walks) Introduction to EN 81-20/50 (revision of EN 81-1/2)
Introduction to EN 81-20/50 (revision of EN 81-1/2) CEN/TC 10: August 6 th, 2014 CEN/TC 10 Work Program CEN/TC 10 Structure European Standardization for Lifts, Escalators and Moving Walks 3 CEN/TC 10 Work
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15374 August 2005 AGREEMENT ICS 37.100.01 English version Security Management System for suppliers to secure printing industry This CEN Workshop Agreement has been drafted and approved
More informationFAQs Radio Equipment Directive (RE-D)
FAQs Radio Equipment Directive (RE-D) What is the objective of the RE-D? The Radio Equipment Directive (2014/53/EU) was adopted in 2014 and Member States had to transpose it into their national law before
More informationBUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationCEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action
CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14972 May 2008 ICS 13.220.20 English Version Fixed firefighting systems - Watermist systems - Design and installation Installations
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationExplosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC 60079-29-2 Edition 2.0 2015-03 REDLINE VERSION colour inside Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen
More informationBUSINESS PLAN CEN/TC 260 FERTILIZERS AND LIMING MATERIALS
Page: 1 BUSINESS PLAN CEN/TC 260 FERTILIZERS AND LIMING MATERIALS 1 BUSINESS ENVIRONMENT OF THE CEN/TC CEN/TC 260 sets up European Standards for all kinds of fertilizers 1 and liming materials. Standardization
More informationCE MARKING OF WOOD-BASED PANELS
28 Market Place Grantham Lincolnshire NG31 6LR Tel: 00 44 (0) 1476 563707 Fax: 0044 (0) 1476 579314 e-mail: wpif.panelboards@virgin.net WOOD PANEL INDUSTRIES FEDERATION CE MARKING OF WOOD-BASED PANELS
More informationRequirements for ships carrying hydrogen and compressed natural gas vehicles
Lloyd's Register briefing IMO FP 55 Summary report for clients Overview The 55 th session of the IMO Fire Protection Sub Committee (FP) was held from 25 th to 29 th July 2011, at the IMO headquarters in
More informationRevision process of EN 45545
Second International Conference MODERN TRENDS OF FIRE PROTECTION IN ROLLING STOCK 25 of June, Warsaw Revision process of EN 45545 Jolanta Maria RADZISZEWSKA-WOLIŃSKA Materials used in the presentation:
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationBUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY
Pages: 1 BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY The whole industry from raw materials through the production process to the customer needs material handling technology.
More informationGuidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC
CEN/TC 88 N 2873 GNB-CPD SG19 Guidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC NB-CPD/SG19/11/085 Issued: 19 October 2011 APPROVED - GUIDANCE GNB-CPD position
More informationFact File 78. Portable Fire Extinguishers under the ADR. Note: This Fact File supersedes Fact File 060 which is withdrawn
Fact File 78 Portable Fire Extinguishers under the ADR Note: This Fact File supersedes Fact File 060 which is withdrawn The European Agreement concerning the International Carriage of Dangerous Goods by
More informationNATIONAL RULES FOR ELECTRICAL INSTALLATIONS IN POTENTIALLY EXPLOSIVE ATMOSPHERES. ET 105:2001 (Second Edition)
NATIONAL RULES FOR ELECTRICAL INSTALLATIONS IN POTENTIALLY EXPLOSIVE ATMOSPHERES ET 105:2001 (Second Edition) Consolidated Amendments, Corrigenda and Errata 01/2010 Introduction When ET 105:2001 was originally
More informationThe term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.
ISO/TC 135 N 476 Non-destructive testing Our Date: 2013-10-15 Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC
More informationCEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1
AFNOR-NORMALISATION Unit Construction and Water Cycle Department CEN/TC 229 Secretariat Your correspondent : Jean-Claude HESLING direct line : +33 (0)1 41 62 83 93 jeanclaude.hesling@afnor.org Secretary
More informationProcedure for the Approval of New Fire Detection and Alarm Technologies
VdS Guidelines for Automatic Fire Detection and Fire Alarm Systems VdS 3469en Procedure for the Approval of New Fire Detection and Alarm Technologies VdS 3469en : 2016-01 (01) Publisher and publishing
More informationBUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY
Date:2014-07-10 Page: 1 BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Business Environment CEN/TC 159 is preparing standards on: Hearing protectors Safety requirements and testing Hearing
More informationCOMMISSION IMPLEMENTING REGULATION (EU) /... of XXX
EUROPEAN COMMISSION Brussels, XXX SANTE/11949-2015 [ ](2015) XXX draft COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX amending Implementing Regulation (EU) No 414/2013 specifying a procedure for the
More informationTo the Members of CEN/TC 250 Structural Eurocodes
Document: CEN/TC 250 N 1250 Date: 31 August 2018 To the Members of CEN/TC 250 Structural Eurocodes N 1250 POLICY GUIDELINES AND PROCEDURES (Version 7a) Note 1 This document provides the policy guidelines
More informationBUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
More informationBUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS CEN/TC 72 Business Plan Page: 1 EXECUTIVE SUMMARY Scope To prepare standards, harmonised where necessary, to meet the essential requirements
More informationFIRE CONTAINMENT AND CONTROL SYSTEMS
FIRE CONTAINMENT AND CONTROL SYSTEMS III INTERNATIONAL CONFERENCE MODERN TRENDS OF FIRE PROTECTION IN ROLLING STOCK WARSAW 2016-05-18 AUTHORS: SERGE MÉTRAL (SNCF) CONVENOR OF CEN TC256 WG1 GUILLAUME CRAVEUR
More informationEUROCODE 5 - A HALFTIME SUMMARY OF THE REVISION PROCESS
EUROCODE 5 - A HALFTIME SUMMARY OF THE REVISION PROCESS Miriam Kleinhenz, Stefan Winter 2, Philipp Dietsch 3 ABSTRACT: This document provides an introduction to the review process of Eurocode 5, the structure
More informationBUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationCouncil of the European Union Brussels, 28 June 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union
Council of the European Union Brussels, 28 June 2017 (OR. en) 10784/17 COVER NOTE From: date of receipt: 26 June 2017 To: No. Cion doc.: T 164 V 655 MI 527 DELACT 116 Secretary-General of the European
More information1 BUSINESS ENVIRONMENT OF THE CEN/TC
Page 2 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or international dynamics describe
More informationISO INTERNATIONAL STANDARD. Fire-resistance tests Elements of building construction Part 1: General requirements
INTERNATIONAL STANDARD ISO 834-1 First edition 1999-09-15 Fire-resistance tests Elements of building construction Part 1: General requirements Essai de résistance au feu Éléments de construction Partie
More informationNew CEN Enquiry procedure - 3 Month enquiry with weighted vote and optional formal vote for CEN home-grown projects
Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods Joint Meeting of the RID Committee of Experts and the Working Party on the Transport of Dangerous
More informationC 319/6 Official Journal of the European Union
C 319/6 Official Journal of the European Union 5.11.2013 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests
TECHNICAL SPECIFICATION ISO/TS 17892-10 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests Reconnaissance et essais géotechniques Essais
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 1.7.2015 C(2015) 4394 final COMMISSION DELEGATED REGULATION (EU) /... of 1.7.2015 on the classification of the reaction to fire performance of construction products pursuant
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationECOS Position Paper: Further recommendations
Consultation Forum according to Art. 23 of Regulation (EU) No 517/2014 on fluorinated greenhouse gases: Barriers to the uptake of low-gwp alternatives to HFCs related to standards, codes and legislation
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Wolverhampton Laboratory Millfields Road Ettingshall Wolverhampton
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 335/02)
C 335/10 EN Official Journal of the European Union 9.10.2015 Commission communication in the framework of the implementation of Directive 94/9/EC of the European Parliament and of the Council of 23 March
More informationWork Programme CEN/TC 251 Health informatics
Secretariat: Nederlands Normalisatie-instituut doc.nr. Vlinderweg 6 P.O. box 5059 CEN/TC 251 2623 AX Delft, 2600 GB Delft, NL NL Netherlands Netherlands telephone: +31 15 2 690 313 date 2008-05-15 total
More informationThe products covered by the Regulation can be classified as follows:
Table of Contents 1. Purpose of the guidelines and disclaimer... 3 1.1. The Regulation... 3 2. Scope... 3 3. Product environmental impacts... 4 4. State of play of legislation... 4 4.1. History of the
More informationBuilding Standards Division. Whisky Maturation Warehouses Storage Buildings (Class 1) Automatic Fire Suppression Systems
Building Standards Division Whisky Maturation Warehouses Storage Buildings (Class 1) Automatic Fire Suppression Systems Crown Copyright 2015 Produced by the Buildings Standards Division February 2015 Version
More informationISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background:
ISO/TC 215 N 2473 ISO/TC 215 Health informatics Email of secretary: Diana.warner@ahima.org Secretariat: ANSI (United States) RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2 Document type: Resolution Date
More information