Precision instrumentation and monitoring solutions for the food industry.

Transcription

1 Precision instrumentation and monitoring solutions for the food industry.

2 Why Comark? Designed for today s busy food businesses from manufacturing through to food service and retail Comark s range of thermometers and related temperature and humidity instruments lead the industry. For temperature measurement, choose from a range which includes both simple and sophisticated hand-held thermometers, handy pocket digitals and dials and non-contact infrareds. Where you need to monitor and record temperature or humidity levels to support HACCP procedures, Comark offers a range of options. The hand-held N5001 Auditor logs, monitors and manages virtually any type of data. Or for 24/7 monitoring, the versatile Diligence EV and EVt ranges of stand-alone loggers could provide the answers. Alternatively, the RF500 wireless monitoring system employs ground-breaking technology to achieve unprecedented performance levels in almost any industry or application. All Comark instruments come with a minimum 1 year warranty unless otherwise stated; all comply with appropriate food industry standards; all components are produced from food grade materials and many products now have BioCote antimicrobial impregnated into their surfaces to provide an extra line of defence against cross-contamination. Comark is certified to ISO 9001 and operates appropriate internal quality management systems. Many instruments are IP rated to classify the degree of protection against dust and water and the CE Mark (usually printed on the back of the instrument) certifies that the product meets European Health and Safety Regulations. If required, a certificate of calibration can be supplied by Comark s own UKAS accredited temperature and humidity calibration laboratory. All of this, plus knowledgeable, technically qualified staff, and over forty years experience delivering the best solutions that s why you should specify Comark. A separate brochure detailing products for non-food applications is also available.

3 Contents 4 RF500 Wireless Monitoring 6 Diligence EV Data Loggers 8 EVt Transport Loggers 8 Logger Starter Kits 9 BioCote Protection 10 Premium Thermometers 12 Premium Thermometer Kits 13 HACCP Auditor 14 Standard Thermometers 16 Standard Thermometer Kits 17 Handy HACCP Thermometers 18 Pocket Digital Thermometers 19 Dial Thermometers 20 Special Purpose Thermometers 20 Timers and Alarms 21 Infrared Thermometers 22 Choosing a Temperature Probe 24 Comark Probe Range 26 Calibration Equipment 27 Calibration and Service 27 Product Warranty Back cover How to buy from Comark Contact us

4 RF500 Wireless Monitoring Delivers exceptional data integrity with no awkward gaps in your records, and gives you complete peace of mind. YEAR 2 WARRANTY The RF500 system provides 24/7 monitoring of temperature, humidity and door events and achieves unprecedented levels of efficiency and reliability through its use of the latest RF technology with built-in mesh networking, and its use of transmitters with bi-directional communications. Key benefits include: Accurate records without compromise Secure multi-user access to data via the Internet at any time Alarm notification via , phone or pager Transmitters that are accurate and have a long battery life Aids compliance with legislative and regulatory requirements Plus, it s easy to install, use and maintain A network of remote sensors and probes collect the information and transmit it to a Gateway Unit which manages the system and stores the data. The result is efficient and versatile round-the-clock monitoring. Signal via route B-D blocked by open chill room door. System automatically re-routes signal via B-F or B-C. A B Manual checks on temperature and humidity are a thing of the past. RF500 does it automatically and, in the event of readings falling outside pre-set limits, alarm notification via screens, SMS, or voice allows immediate corrective action to be taken. RF500 answers market demands for a reliable system which is easy to understand and operate, but can just as easily be reconfigured or expanded in line with changing needs. Transmitters include an LCD and LEDs for alarm conditions. E 10 Double Glazing C F G D MAIN LAB OFFICES Instant alarm notification is via screens, SMS, voice or to your PC, PDA, mobile or pager. 4

5 The powerful Gateway Unit requires no specialist PC software. It connects directly to the local area network, permitting 24/7 single or multi-user access via the Internet. The system also provides a full audit trail, electronic signatures and data protection to help meet HACCP compliance as required by EU Regulation 852/2004. It is ideal for applications where protection of your products and good name are paramount. Up to 512 channels Up to 128 transmitters Up to 10 years storage capacity Stop, start etc. High alarm limit shown in red Low alarm limit shown in blue Export function Mean Kinetic Temperature value Transmitter Options RF512 with an integral temperature sensor plus connectors for two external thermistor probes and an external door sensor. RF513 with integral temperature and humidity sensors and a connector for an external door sensor. RF515 can be connected to a control loop and programmed to measure an extensive range of parameters such as pressure, gas, flow, level, dissolved oxygen, CO 2 and many more. RF516 with a precision temperature transmitter and integral temperature sensor plus connectors for one external PT100 probe and an external door sensor. For full product details or an on-site demonstration, contact the Comark Sales Office on 0844 ( )

6 Diligence EV Data Loggers Stand-alone temperature and humidity loggers that remove the risk of human error. YEAR 2 WARRANTY Diligence EV data loggers are lightweight and small enough to be used almost anywhere. They can be permanently located or used to monitor goods in transit. Various models are available for measuring temperature, humidity and different process parameters. Long battery life and a large memory allows logging over extended periods. Comark EV software is required to program logger tasks, download and analyse data and keep permanent records to meet HACCP requirements. The software provides instant automatic generation of graphs and allows data to be exported into Excel, or graphs into Word for ing. Two software versions are available, see Diligence EV Software panel opposite. 6 LCD display for local readings Green/red LEDs to show active and alarm conditions Tough, dust and waterproof case to IP67 standard Up to 5 years battery life Ability to log over multiple periods Large 32k memory with wraparound, so no lost data: 1 channel: 16,000 samples 2 channels: 8,000 samples 3 channels: 5,300 samples 4 channels: 4,000 samples 5 channels: 3,200 samples Infrared interface for programming and downloading data Logging frequency from 1 second to 99 hours (2 seconds/minute for N2014) Technical Selector Displayed Resolution Sensor Type Measurement Range Accuracy N Thermistor 40 C to +70 C N N2013 Temperature: 0.1 Humidity: 0.1% RH Thermistor Thermistor Internal sensor: 40 C to +70 C External/sensors: 40 C to +150 C Temperature: 20 C to +60 C Humidity: 0 to 97% RH non-condensing N2014 Type K Thermocouple 200 C to C 0.2 up to and Type T Thermocouple 200 C to +400 C including +300 C Thermistor 50 C to +150 C 4 digits, N decimal place 4 to 20mA EVt1* 0.1º Thermistor 20 C to +70 C EVt2* 30 C to +70 C System Accuracy at: (Temperature) 25 C to +50 C: ±0.5 C 40 C to +80 C: ±1.0 C 40 C to +150 C: ±2.0 C (typical) (Humidity N2013 only) 20 C to +60 C: ±3% Instrument Accuracy at 20 C: ±5 C + 0.5% of reading Instrument Accuracy at 20 C: ±0.3% of full scale ±0.5 C *EVt1 and EVt2 are described on page 8

7 N2011 Temperature logger Single internal sensor for temperature logging only. This logger is certified to meet transport standard EN12830:1999. Order code: N2011 riešenia na presné meranie N2012 Multi sensor temperature logger Single internal temperature sensor and up to 4 external thermistor temperature sensors, connected via a Multi-link box (sold separately). Used in conjunction with Comark probes, the N2012 can be used to monitor local temperature via the internal sensor, plus up to 4 adjacent temperatures, typically fridges and freezers. N2014 Multi sensor high temperature logger Monitors temperatures from up to three external Type K or Type T sensors via an adaptor cable (sold separately). Use of these sensors allows a much wider range of temperatures to be monitored. The N2014 can also be used in conjunction with a single Thermistor probe if high accuracy over a core temperature range is required. Order code: N2014 Order code: N2012 N2013 Combined temperature and humidity logger Single fixed external temperature and humidity sensors. Order code: N2013 N2015 ma Logger The N2015 is designed for connection into the control loop of various automated processes via an ADP50 adaptor cable and can be programmed to monitor a wide range of parameters, typically pressure, ph and airflow. Order code: N2015 EV Software EVSW Software General use logger software. Order Code: EVSW EVSWPRO Software Professional version of logger software with security options to aid HACCP compliance as required by EU regulation 852/2004. Order Code: EVSWPRO Accessories EVTCRU USB computer interface for EVt loggers. Order Code: EVTCRU N2000CRU USB computer interface Order Code: N2000CRU N2000BOX Multi-link box to connect up to four thermistor external sensors to data logger model N2012. Order Code: N2000BOX N2000ADP/K Adaptor cable to connect up to three Type K probes to data logger model N2014. Order Code: N2000ADP/K N2000ADP/T Adaptor cable to connect up to three Type T probes to data logger model N2014. Order Code: N2000ADP/T ADP50 Adaptor cable to connect N2015 loggers to a sensor transmitter. Order Code: ADP50 A17476 Lithium battery with case seal. Order Code: A17476 SSF2 Stainless steel filter N2013. Order Code: SSF2 7

8 EVt Transport Loggers When you need to keep a temperature eye on goods in transit or storage. EVt loggers are robust, low cost and easy to use and provide a highly efficient method of logging. Using Comark EV software, EVt loggers can be programmed to record the temperature at various stages of a journey, and the results later downloaded to a PC for immediate analysis and permanent records. Shared features include: Single button operation LCD which shows essential data without the need for downloading LEDs for active and alarm indication 1 second to 99 hours logging frequency 3000 readings memory capacity Display resolution: 0.1 System accuracy: ±0.5 C See pages 6 & 7 for specifications and EV Software EVt1 Single use logger Supplied pre-programmed but can be re-programmed. Temperature range: 20 C to +70 C Battery life: 12 months Order code: EVT1 EVt2 Multi-use logger Can be reused after each trip then re-programmed. This logger is certified to meet transport standard EN12830:1999. Temperature range: 30 C to +70 C Battery life: 24 months Order code: EVT2 Logger Starter Kits These expandable kits contain all you need to start logging. N2011 Starter Kit N2011 Logger 1 x EVSW Software 1 x N2000CRU USB Computer Interface Order code: N2011STARTERKIT EVt1 Starter Kit EVt1 Logger 1 x EVSW Software 1 x EVTCRU USB Computer Interface N2012 Starter Kit N2012 Logger 1 x EVSW Software 1 x N2000CRU USB Computer Interface Order code: N2012STARTERKIT EVt2 Starter Kit EVt2 Logger 1 x EVSW Software 1 x EVTCRU USB Computer Interface 8 Order code: EVT1STARTERKIT Order code: EVT2STARTERKIT BIG SAVINGS when you order a starter kit N2013 Starter Kit N2013 Logger 1 x EVSW Software 1 x N2000CRU USB Computer Interface Order code: N2013STARTERKIT N2014 Starter Kit N2014 Logger 1 x EVSW Software 1 x N2000CRU USB Computer Interface Order code: N2014STARTERKIT

9 Stop! Think how your business could benefit from BioCote protected instruments. As an extra level of defence against crosscontamination, all the latest Comark instruments are manufactured with BioCote antimicrobial technology impregnated into the instrument surfaces, keypads and probe handles. The technology utilizes silver, a natural antimicrobial that helps prevent the growth of bacteria, mould & fungi and lasts for the life of the instrument. When micro-organisms come into contact with the silver, their ability to reproduce is inhibited and they die. A recent trial by BioCote Ltd and The University of Wolverhampton Science Park canteen was conducted to compare micro-organism levels on a BioCote treated Comark thermometer with an untreated thermometer. The trial was carried out over an 8 week period. Swabs were taken from the thermometer case, keypad and probe handle before and after each use and the number of contaminating bacteria was counted. The treated instrument showed a dramatic reduction in microbe levels, proving beyond any doubt that BioCote protected instruments are significantly cleaner and safer to use in sensitive environments. The actual result was a massive 92.73% reduction in microbe levels! Only Comark offers thermometers with Biocote antimicrobial technology

10 Premium Thermometers For temperature measurement applications when only the best will do. These premium thermometers provide excellent accuracy and incorporate a range of advanced features designed to answer the quality control and HACCP requirements of the professional user. These include a permanent clock and countdown timer within the display with selectable alarms to allow probe insertion times and cooking and cooling times to be monitored. All three models have BioCote antimicrobial impregnated into the instrument surfaces for increased protection against cross-contamination see page 9 for more details. C22 Dual Sensor This Thermistor/Type T thermocouple thermometer has an easy to use keypad and a large, clear LCD display. The Thermistor sensor gives greater accuracy over the all important 50 C to +150 C food service range, while the Type T sensor extends the measurement capability and provides faster response where required. The case features a built-in protective boot and is waterproof to IP67 standard. 200 C to +400 C range depending on sensor Countdown timer with audible bleep Permanent clock display Selectable alarm Auto switch-off Data hold Scales C, F C28 Single Sensor The C28 shares all of the case design and user features of the C22, but the Type K thermocouple, with its sub-min connector, makes it suitable for general food temperature applications over an extended range up to +600 C, which covers cooking oil temperatures and certain types of oven. 200 C to +600 C range Countdown timer with audible bleep Permanent clock display Selectable alarm Auto switch-off Data hold Scales C, F Order code: C28 YEAR 2 WARRANTY Order code: C22 10 YEAR 2 WARRANTY

11 C32 Dual Sensor The robust C32 thermometer is tested to meet European Standards for the temperature monitoring of quick frozen foodstuffs through the supply chain (EN13485:2001). Use with PX37L compliant dual purpose air/penetration probe (thermistor) when monitoring quick frozen foods. The thermometer has an easy to use keypad, large LCD and IP65 rating. It is also a perfect choice for other food applications where a robust thermometer is required and any thermistor or Type T probe with a Lumberg Connector can be chosen C to +400 C range depending on sensor -50 to +150 C range when used with PX37L probe for EN13485:2001 compliant applications Tested to meet EN13485:2001 Countdown timer with audible bleep Permanent clock display Selectable alarm Auto switch-off Data hold Scales C, F Order code: C32 YEAR 2 WARRANTY N9094 Triple Sensor The ultimate food thermometer with triple sensor compatibility Type K thermocouple, Type T thermocouple and thermistor, all with Lumberg connection. This combination provides exceptional accuracy in the all important 50 C to +150 C food service range but also allows a very wide overall measurement capability, extending from the coldest freezers to the hottest commercial ovens and hobs. An IP68 rated fully waterproof case adds to its versatility. 200 C to C depending on sensor High accuracy Rapid response Permanent clock display Selectable alarm Countdown timer with audible bleep Data hold Auto switch-off Scales C, F Interactive menu selection Order code: N9094 Technical Selector C22 YEAR 2 WARRANTY Displayed Resolution Sensor Type Measurement System Accuracy at 23 C Battery Life Range between 0 C and +70 C > 100 C: 0.1, <_ 100 C: 1.0 Thermistor 50 C to +150 C <±0.3 C Type T Thermocouple 200 C to +400 C ±0.5 C Up to 5 yrs C28 Type K Thermocouple 200 C to +600 C 0.1% ±2 C C32 Thermistor 50 C to +150 C <±0.3 C > 100 C: 0.1, <_ 100 C: 1.0 Type T Thermocouple 200 C to +400 C ±0.5 C Up to 5 yrs Thermistor 50 C to +150 C <±0.3 C All types: 10 yrs > 100 C, <+1000 C: 0.1 C (based on usage of N9094 Type T Thermocouple 200 C to +400 C ±0.5 C <_ 100 C, >_ C: 1.0 C 4 hrs per day, 365 days Type K Thermocouple 200 C to C *See note below per year) Typical accuracy with a Comark probe. *Instrument accuracy at 23 C, Type K or Type T, full range : 0.1% ±0.2 C. 11

12 Premium Thermometer Kits These conveniently packaged kits include the thermometer and probe selection most appropriate to the application. N9094 EHO Kit Food Thermometer kit designed for Environmental Health Officers. N9094 Thermometer 1 x ST23L surface probe 1 x AT22L air probe 1 x PT24L/C penetration probe 1 x PW70T probe wipes Carry Case Order Code: N9094EHOKIT C22 Professional Caterer s Kit C22 thermometer 1 x PX22L penetration probe 1 x AX24L air probe Carry case Order code: C22PCKIT C22 Food Kit C22 thermometer 1 x PX22L penetration probe Order Code: C22FKIT Help with HACCP Compliance Achieving HACCP compliance is now relatively simple, using the Comark HACCP Auditor integrated with the HaccpWorks website. Working together with HaccpWorks and HACCP specialists Hygiene Audit Systems, Comark can offer a complete service from establishing the plan, to training, gathering data efficiently and auditing. This service provides multi-site control from one location, ensuring consistent delivery of your plan across your operation with cost savings through expert on-line auditing. For more information call 0844 ( ) WORKS HYGIENE AUDIT S Y S T E M S 12

13 HACCP Auditor Eliminates manual record keeping and maintains all your HACCP, Due Diligence or H & S records in a convenient database. N5001 HACCP Auditor The N5001 is a compact data management tool which allows you to log, monitor and manage your HACCP data. It s easy to programme for almost any type of check. Use it for temperature checks, cleaning schedules, actions on damage, recording quantities, monitoring sell-by dates you can create your own bespoke inspection schedules for production processes unique to your operation. Aids HACCP compliance as required by EU Regulation 852/2004 Eliminates written records and minimises human error Records and stores temperature and non-temperature variables e.g. No.of units, Yes/No responses, dates, temperature profiling etc Monitoring of and corrective actions for each Critical Control Point Data is stored in real time and is tamper proof Filter data to quickly analyse and find non-conformance Instant audit and traceability of product Password protected access for authorised users only Due diligence protection Compatible with a range of Type K and T temperature probes Order code: N5001 Requires software and communications lead. Order code: N5001SI YEAR 2 WARRANTY Technical Specifications Software The special Auditor software allows you to design your own series of instrument screens detailing checks or instructions and prompting corrective actions where required. The data is stored in a secure database and can be filtered, sorted and printed, or exported to stand-alone spreadsheet or database packages. Temperature range: 200ºC to +700ºC Compatible with Types T and K sensors Display: LCD, 128 x 64 pixels Display resolution: 0.1ºC Memory: Approximately 3000 readings Software: Requires Windows 2000, XP or Vista Battery life: Up to 500 hours 13

14 Standard Thermometers When you just need to measure temperature within known parameters, you ll find the instrument you need here. These single sensor instruments provide similar levels of reliability and accuracy as their more expensive counterparts, but exclude some of the more sophisticated features like multiple sensor compatibility. They generally answer the needs of users who don t wish to pay for features they ll never use and who simply need a well-designed, economically priced thermometer to check temperatures within defined limits. Catercheck 3 with Thermistor sensor and permanently fixed probe With its permanently attached penetration probe, this instrument is the ideal choice for the routine inspections of solid and semi-solid foods. 40 C to +125 C range Thermistor sensor for accurate readings Battery life up to 5 years Single button On/Off operation Auto switch-off Order Code: Catercheck 3 C20 with Thermistor sensor and Lumberg probe connector Similar to the Catercheck 3, but a Lumberg connector allows a range of Thermistor type probes to be connected, making this instrument suitable for a broader range of applications. 40 C to +125 C range Thermistor sensor for accurate readings Battery life up to 5 years Single button On/Off operation Auto switch-off Order code: C20 14

15 C21 with Thermistor sensor, Lumberg probe connector and timer A more sophisticated instrument than the C20. Includes switchable C and F scales, a permanent clock within the display and a countdown timer with audible bleep for monitoring probe insertion times or cooking/cooling times. 50 C to +150 C range Countdown timer Data hold function Scales: C, F Permanent clock Selectable time auto switch-off Order code: C21 YEAR 2 WARRANTY C30 Single sensor The C30 thermometer is tested to meet European Standards for the temperature monitoring of quick frozen foodstuffs through the supply chain (EN13485:2001). Use with PX37L compliant dual purpose air/penetration probe (thermistor) when monitoring quick frozen foods. The thermometer has simple, single button operation and with IP65 rating it is suitable for wet environments where a more robust thermometer is required. -40 to +125 C range Tested to meet EN13485:2001 Single button on/off operation Permanent clock display Data hold C26 with Type T sensor, Sub-min probe connector and timer Similar specification and features to the C21, but the Type T sensor gives a wider temperature measurement range. 50 C to +400 C range Countdown timer Scales: C, F Permanent clock Auto switch-off Order code: C26 Order code: C30 YEAR 2 WARRANTY YEAR 2 WARRANTY Technical Selector Displayed Resolution Sensor Type Measurement Instrument Accuracy at 23 C Battery Life Range Catercheck 3 0.1º Thermistor 40 C to +125 C ±0.5 C ( 20ºC to +70ºC) Up to 5 yrs C20 0.1º Thermistor 40 C to +125 C ±0.5 C ( 20ºC to +70ºC) Up to 5 yrs C21 > 100 C: 0.1º, >_ 100 C: 1.0 Thermistor 50 C to +150 C ±0.3 C (0ºC to 70ºC) Up to 5 yrs C26 > 100 C: 0.1º, <_ 100 C: 1.0 Thermistor 200 C to +400 C 0.1%±0.2 C (full range) Up to 5 yrs C30 0.1º Thermistor 40 C to +125 C ±0.5 C ( 20ºC to +70ºC) Up to 5 yrs Typical accuracy with a Comark probe. 15

16 Standard Thermometer Kits Here you ll find a number of neatly packaged instrument and probe combinations most appropriate for a particular application. C20 Food Kit C20 thermometer 1 x PX22L penetration probe Order code: C20/FKIT C20 Professional Caterer s Kit C20 thermometer 1 x PX22L penetration probe 1 x AX24L air probe Carry case Order code: C20/PCKIT Using thermometers in a food environment Cabinet refrigerators/freezers The thermometer should be placed on the top shelf of the refrigerator/freezer and left approximately 3-5 minutes to attain an accurate reading. Close the door as soon as possible to reduce temperature fluctuations. Walk-in chillers/freezers Place the thermometer to the front of the display cabinet and leave for the temperature to stabilise. Chest freezers Place the thermometer on top of any food in the freezer, close the door and leave to stabilise. Chill display cabinets Place the thermometer to the front of the display cabinet and leave for the temperature to stabilise. Hot plates, bain-maries etc Due to the difficulty of monitoring air temperatures around this equipment it will be necessary to check the temperature of food stored using a thermometer fitted with the correct probe. Delivery Use infrared or a thermometer fitted with correct probe to identify any temperature control problems. For more information call 0844 ( )

17 Handy HACCP Thermometers Some useful ideas to make temperature checking easier and safer. P125 Pocketherm Simple to use folding pocket thermometer Pocketherm is a fast, accurate and compact thermometer with a folding penetration probe to allow easy and convenient stowage in a pocket or a bag. The probe can be angled to suit the application, and when fully closed it acts as an off switch. As well as a temperature display, coloured LEDs provide additional quick recognition of key HACCP temperature zones. Temperature range: 40 C to +125 C Large LCD displays actual temperature Buzzer and coloured LEDs give instant indication of frozen, chilled and cooked temperature zones: Yellow LED flashes when measured temperature is below 18 C Green LED flashes when measured temperature is between 0ºC and 5 C Red LED flashes when temperature is at or above +70 C Tapered probe for fast response Auto switch-off to preserve battery Accuracy: ±0.5 C Order code: P125 C11 Series HACCP thermometers Colour coded to reduce risks from cross-contamination C11 HACCP thermometers are available in five colour options and are ideal for catering and other food uses where colour coding could help reduce risks from cross-contamination. The C11 range of colours can be included in your HACCP procedures. Temperature range: 40 C to +125 C Choice of 5 colours for use with different food types Simple single button operation Each instrument supplied with one penetration probe Order codes Red C11R Yellow C11Y Green C11G Blue C11B Orange C11O 17

18 Pocket Digital Thermometers Generally designed to answer a particular need, but each is sufficiently versatile to cover a range of applications. PDT300 Pen style waterproof pocket thermometer Ideal for measuring temperatures of thin foods like burgers or pancakes. Measurement range: 50 C to +150 C Thin tip for fast response Accuracy: ±1 C Order code: PDT300 KM10 Robust heavy duty pocket thermometer Designed for tougher environments can survive a 1m drop. Measurement range: 40ºC to +150ºC Protective sleeve with pocket clip Order code: KM10 DT400 Waterproof pocket digital thermometer Simple to use thermometer, waterproof and commercial dishwasher proof too. Measurement range: 20 C to +200 C Protective sleeve with pocket clip Accuracy: ±0.5 C Data hold Order code: DT400 KM12 Pocket digital thermometer Incorporates extended temperature range and maximum hold feature. Measurement range: 10 C to +200 C Displays max, min and current temperatures Heat resistant, waterproof case Protective sleeve with pocket clip Accuracy: ±1 C Order code: KM12 18

19 Dial Thermometers Constructed from stainless steel, they feature a plastic watertight lens over an easy to read clock style display. All are supplied with a protective sleeve and accuracy on all models is ±1 division. TCF220/3K Meat roasting thermometer Measurement range: 18 C to +105 C with dual F scale Stem length: 125mm Order code: TCF220/3K MT200K For checking cooked meat temperatures Larger dial for greater accuracy over cooked meat temperature range. Dishwasher safe and includes adjustable temperature indicator. Measurement range: +60 C to +85 C with dual F scale Stem length: 120mm TC100 Measurement range: 10 C to +100 C Stem length: 125mm Order code: TC100 Order code: MT200K T220/38A For steam table temperatures and hot drinks Tough, durable, with large easy to read face and a clip for attaching to jugs and cups. Measurement range: 0 F to 220 F Stem length: 200mm CD400K Confectionary/deep fry thermometer Dishwasher safe and with adjustable temperature indicator. Measurement range: +40ºC to +200ºC with dual F scale Stem length: 115mm Order code: CD400K Order code: T220/38A 19

20 Special Purpose Thermometers For checking oven and fridge temperatures. FG80AK Fridge/freezer thermometer Easy to read, hangs or stands, filled with non-toxic spirit. Measurement range: 40 C to +27 C with dual F scale Order code: FG80AK RFT2AK Fridge/freezer thermometer Hangs or stands, with bold numbers and colour coded zones to show safe temperatures or possible spoilages. Measurement range: 30 C to +30 with dual F scale Order code: RFT2AK DOT2K Oven thermometer Hangs or stands, with bold numbers and colour coded zones for quick reference. Measurement range: +100 C to +280 C with dual F scale Order code: DOT2K Timers and Alarms For counting down from 100 minutes or 24 hours. UTL882 Digital clock/timer Counts up to or down 24hrs with 1 second resolution. Clock functions and countdown timer can operate simultaneously. Memory timer to store pre-set time Incorporates real time clock, magnet, pocket clip and stand Order code: UTL882 UTL264 Digital timer Extra large digits count down from 99 minutes 59 seconds, with buzzer, magnet and stand Order code: UTL264 20

21 Infrared Thermometers For safe, non-contact surface temperature measurement. Non-contact temperature measurement is a useful tool throughout the food industry. Apart from reducing risks from crosscontamination, non-contact also means less waste as it avoids destructive tests on valuable products. Infrared thermometers allow quick non-contact temperature checks to be carried out and if a problem is identified, further investigation can be undertaken using a penetration probe. Comark offers two infrared thermometers, FoodPro and FoodPro Plus. The following features apply to both. Indicator lights to warn of potential problems Illumination light identifies target area IP54 rated hand washable instrument case Switchable C / F scales 7 second hold on the display, with auto switch-off FoodPro Infrared thermometer Simply point the instrument at the area to be measured and read off the temperature on the display. Measurement range: 30 C to C, switchable to F Accuracy for targets at 30 C to +65 C: 1 C Accuracy for targets above 65 C: ±1.5% of reading Order code: FP YEAR 2 WARRANTY FoodPro Plus Combined infrared and probe thermometer Similar to the FoodPro but with a wider infrared temperature range, a countdown timer and a flip-down penetration probe for more accurate confirmation of temperature where a potential problem has been identified. Measurement range (infrared): 35 C to +275 C Measurement range (probe): 40 C to +200 C Infrared accuracy for targets at 30 C to +65 C: 1 C Infrared accuracy for targets above 65 C: ±1.5% of reading Probe accuracy between 18 C and +65 C: ±0.5 C Order code: FPP YEAR 2 WARRANTY 21

22 Choosing a Temperature Probe A comprehensive range that covers virtually every temperature measurement application. Comark produces one of the largest available ranges of temperature probes, with a probe for almost every application. There is a special probe design and build facility so if you can t find what you need within the standard range, Comark can either modify an existing probe or supply probes to customer designs. Probe Categories Comark standard probes fall into four main categories and each includes probes with different sensor types: Penetration probes are used for measuring the internal, or core temperatures, of solid and semi-solid materials. Surface probes are designed for maximum contact with the surface to be measured. Air probes are for measuring air and gas temperatures, but also include food simulant and damped sensor probes. Immersion probes measure the temperature of liquids and semi-solids. Where required, UKAS certificates of calibration can be provided for probe and thermometer combinations. Choosing the right sensor The choice of sensor will determine the measurement range, the accuracy and the response time. The sensor type must also be compatible with the thermometer you use. Comark standard probes use two basic sensor types: 1. Thermocouples. These consist of two wires made of dissimilar materials joined together at the measurement tip (the hot junction) and connected at the other end to the instrument (the cold junction). The two main thermocouples used in Comark food thermometers are Types K and T. See opposite for thermocouple limits. The Type K Thermocouple has a wide measurement range, responds quickly to temperature changes and is suitable for general food applications. The Type T Thermocouple also responds quickly to temperature changes and generally provides greater accuracy, but it is effective over a narrower temperature range. 2. Thermistor (PST) is a semi-conductor sensor and provides exceptional accuracy but over a much narrower temperature range. 22

23 Choosing the right probe Within the Comark standard probe range you ll find probes for general duties as well as ones for more specialist applications. Try to match the probe to the job. For example, a low mass flexible air probe is better suited to accurate air temperature measurement than a penetration probe which will take too long to stabilise. For solid and semi-solid materials use surface probes for surface measurements. Specialist options include probes with a rigid flattened stem for sliding between packs of frozen foods on a pallet or a specially weighted griddle probe to ensure consistent cooking temperatures. Use penetration or immersion probes to check internal temperatures. Where holes need to be drilled in solids, use a thermocouple or thermistor probe and make sure it s inserted to at least 6 times its diameter. You can also use a thermal transfer compound for improved accuracy. Alternatively a corkscrew probe may be most appropriate. For liquids use an immersion probe, or you can use certain penetration probes, but check for possible corrosive effects on the sensor first and agitate the liquid for a faster response. For air and other gasses use an air probe. Response times are affected by heat transfer around the sensor, and the smaller the sensor, the faster the response time. Response is also affected by air movement. Food simulant and damped sensor probes have a large mass around the sensor to slow response times so they don t trigger alarms when fridge or freezer doors are opened or during defrost cycles. Understanding the Comark probe order code Connector Types Category Type P: Penetration S: Surface A: Air I: Immersion Sensor Type K: Type K thermocouple T: Type T thermocouple X: Thermistor (PST) P: PT100 P K Sequential Code Number 24 Connector Type M: Sub-miniature L: Lumberg L8: Lumberg 8-pin, for N5001 HACCP Auditor B: Bipole M M: Sub-miniature L: Lumberg L8: 8-pin Lumberg B: Bipole Probe Leads Comark probe leads are matched to the intended applications for the probe. The materials used are: PVC PVC coiled leads provide ease of use in ambient temperatures of up to +70 C. FEP and PTFE These materials are especially suited to food probes and can be used in sub-zero temperatures. Steel braided PTFE leads provide greater strength. Fibreglass (FG) Fibreglass insulated leads are used for special application probes where the lead could be subjected to very high ambient temperatures of up to +400 C. Thermocouple Limits Type Temperature Range K 200 C to C N 200 C to C T 200 C to +400 C J 200 C to C R, S 50 C to C E 200 C to C B 0 C to C 23

24 Penetration Probes PX23L PX24L Oven meat probes for checking meat and food temperatures during cooking. PX25L riešenia na presné meranie Sensor Connector Temp Range Response Stem Stem Lead Lead Order C Time Length Dia Length Material Code (secs) (mm) (mm) (m) PST L 40 C to +150 C FEP PX22L PST L 40 C to +150 C FEP PX23L PST L 40 C to +150 C FEP PX24L PST L 40 C to +150 C FEP PX25L T L 100 C to +250 C PTFE PT24L PST L 40 C to +150 C FEP PX37L* Fast response food probes. For incorporating into your HACCP plan, the above probes are available with coloured end caps. Coiled leads and silicone impregnated connectors are also available if required. For coiled leads add /c to order code. For silicone connectors ad /s to order code. Additional charge for silicone impregnated connectors *Probe is certified to meet transport standard EN13485:2001 use with C32 and C30 thermometers. PST L 40 C to +150 C FEP PX16L T L 100 C to +250 C PTFE PT23L K M 50 C to +250 C PTFE PK23M T L 100 C to +250 C PTFE PT26L Integral plug probes. PK23M PT26L T L 100 C to +250 C PT25L PST L 40 C to +150 C PX33L PST L 40 C to +150 C FEP PX31L T L 100 C to +250 C FEP PT31L K L 100 C to +250 C FEP PK31L Penetration probes for use with Diligence EV data loggers. T L 100 C to +250 C PVC PT29L T M 100 C to +250 C PVC PT29M PT29L PT29M Corkscrew probes for frozen foods. Surface Probes Heavy duty pallet probes. K M 50 C to +250 C X PVC SK38M T L 100 C to +250 C X PVC ST38L SK38M Between pack temperature probes. K M to +260 C 1.0 SK40M Griddle probe ST38L T L 40 C to +70 C PTFE ST23L PST L 40 C to +70 C FEP SX23L 24 The time constant is the time taken for the probe to reach 63% of the value of the temperature change. Multiply x 3 for the time taken to achieve 95% and by 5 for 99%. Not suitable for Intrinsically Safe applications. Thermocouples: Tolerances relate to BS EN (1993), Class A.

25 Air Probes riešenia na presné meranie Sensor Connector Temp Range Response Stem Stem Lead Lead Order C Time Length Dia Length Material Code (secs) (mm) (mm) (m) PST L 40 C to +70 C FEP AX23L Rigid air probe. PST L 40 C to +70 C FEP AX24L PST L 40 C to +70 C FEP AX25L Flexible air probes. T L 100 C to +250 C PTFE AT22L Fast response probe with steel braded lead. PST B 40 C to +70 C FEP AX22B Flexible air probe. PST L 40 C to +70 C FEP DX31L Food simulant probe. PST L 40 C to +70 C FEP DX28L Damped sensor probe. Immersion Probes T L 100 C to +250 C AT25L Integral sensor probe. T L 200 C to +400 C PTFE IT21L Deep fat probe with flexible stem for food applications. IT23M T M 40 C to +150 C PTFE IT23M T L 40 C to +150 C PTFE IT23L PST L 40 C to +150 C FEP IX23L Weighted milk dip probes for dairy applications, also suitable for other liquid dip applications. IT23L or IX23L Probe Accessories EK22M Type K 10m extension lead. Order Code: EK22M ADP34 1m lead for PT29L corkscrew probe. Order Code: ADP34 ADP35 1m lead for PT29M corkscrew probe. Order Code: ADP35 Probe Wipes Probes must be kept clean and this task is easily handled using Comark antibacterial probe wipes. Available in a tub of 200 wipes (PW200T), or alternatively a handy pocket size pack of 70 wipes (PW70T). Order Code: PW200T Order Code: PW70T Many Comark probe handles have BioCote antimicrobial protection which provides an extra level of defence against cross-contamination, an important addition to your own HACCP procedures, reducing the risk from harmful bacteria which are a hazard in many food environments. For full details of the Comark probe range check or contact the Comark Sales Office. 25

26 Calibration Equipment Allows you to check the accuracy of the thermometers you are using. C9040 Temperature simulators The C9040 comes complete with a UKAS Certificate of Calibration. A rotating switch allows the accuracy of a thermometer to be checked at five preset temperature simulation points. Three models cover different thermocouple and connector requirements. Auto switch-off Battery test facility Accuracy at 23 C ±0.2 C KM20REF Reference thermometer This accurate Pt100 reference thermometer is ideal for regular accuracy checks on the thermometers you are using. Auto/manual switch-off Range -100 C to C 5 point UKAS Certificate of Calibration supplied at -18 C, 0 C, +8 C, +70 C and +100 C* Order code: KM20REF *Different points are available if requested at the time of ordering. This may incur a small additional charge. Test Caps Each cap simulates a specific temperature to check your thermistor thermometers. Each cap has a UKAS Certificate of Calibration. C9040K Type K Thermocouple Sub-miniature connector Simulated temperature points: -20 C, 0 C, +50 C, +100 C, +500 C Order code: C9040K C9040TM Type T Thermocouple Sub-miniature connector Simulated temperature points: -18 C, 0 C, +5 C, +70 C, +100 C Order code: C9040TM C9040TL Type T Thermocouple Lumberg connector Simulated temperature points: -18 C, 0 C, +5 C, +70 C, +100 C Order code: C9040TL KM820/VAL Validator calibration check unit Specifically designed for checking the accuracy of infrared and other contact thermometers. It needs to be used in conjunction with a digital probe thermometer. Test Cap Temperature Order Code Point TX21L 18 C TX22L 5 C TX23L 0 C TX24L +3 C TX25L +63 C TX26L +70 C Order code: KM820/VAL Alternatively, the unit is available within a kit, complete with a KM20REF thermometer and carrying case. Order code: KM820/VKIT Order code: Please specify fom list 26

27 Calibration & Service Comark offers full instrument service and UKAS accredited temperature and humidity calibration from its own in-house laboratory. Comark offers full instrument service and UKAS accredited temperature and humidity calibration from its own in-house laboratory. Ensure that your instruments are kept within their calibration limits by having them checked regularly. Certificates of Calibration Certificates of Calibration, often essential as part of quality assurance systems, can be supplied when calibration checks are carried out or with new instruments. These can be provided from the Comark UKAS (United Kingdom Accreditation Service) accredited temperature and humidity calibration laboratory. NPL traceable certification also available. On-site Service Comark provides confidence and convenience with on-site UKAS accreditation, particularly suited to RF Wireless Systems and portable temperature instruments where down-time could be an issue. Accreditation in accordance with the recognised International Standard ISO/IEC 17025:2005 Certify your instruments over the range 40 C to +150 C National coverage provided by our team of specialist engineers Other services include: RF swop-out service where on-site calibration is impractical Thermal mapping for storage, handling and distribution to ensure optimum performance and assist with meeting regulatory requirements For full details contact the Comark Service Department or service@comarkltd.com Product Warranty All Comark instruments have a minimum one year warranty unless otherwise stated. The warranty period for temperature probes is for six months and all other probes and electrodes are unwarranted because the conditions of use are beyond our control. The Comark warranty covers manufacturing defects and component failures on all products returned to Comark premises and applies worldwide. The warranty does not affect your statutory rights. In line with our policy of continuous development we reserve the right to alter any product specifications without notice. All products are covered by our Quality Management System which is compliant with BS EN ISO9001:2000 for the design, manufacture, supply, service, repair and recalibration of electronic measuring instruments and equipment. 27

28 How to buy from Comark Order Direct Simply call, or fax the Comark Sales Office and pay by Visa, MasterCard, Switch card or cheque. If you intend to place regular orders, please ask about opening a credit account. If you already have a credit account, please quote your account number on all orders. Delivery and Charges Prices exclude VAT at the current rate and all orders are subject to a delivery charge. Delivery is charged at 8.00 within the UK mainland (excludes Northern Ireland and Highlands and Islands). Prices for other delivery options and destinations are available on request. We reserve the right to change prices without prior notification. Discounts are available for bulk orders. Order On-line You can order directly from our website at Simply make your product selections, click on the Add icon to place in your shopping basket and follow the on-screen directions. To contact us For Sales and Admin. Telephone: 0844 ( ) The Sales Office phones are open from 8.45am to 5.00pm weekdays. Call us for help and advice to find the right solution. Alternatively, you can arrange a site visit from one of our experienced Field Sales Team. Or you can salesuk@comarkltd.com - UK and Ireland salesint@comarkltd.com - International or Fax: 0844 ( ) Or click on for full product details or to buy on-line. For Service and Calibration Telephone: ( ) Or you can service@comarkltd.com or Fax ( ) Or write to: Sales and Administration Service Department Comark Bury Mead Road Hitchin Hertfordshire SG5 1RT UK Comark 52 Hurricane Way Norwich Norfolk NR6 6JB UK CERTIFICATE No. FM29700 ISO 9001 C191/3/EN Comark J45929/01/10