For each product, the standard or normative document and certification scheme in accordance with ISO/IEC are listed below. normative document
|
|
- Daniel Lamb
- 5 years ago
- Views:
Transcription
1 RISE Research Institutes Sweden AB 1 Scope of accreditation Certification of products For each product, the standard or normative document and certification scheme in accordance with ISO/IEC are listed below. Certification scheme according to Product Standard/ ISO/IEC 17067:2013 table 1 Certification rules normative document Archival material Certification according to The Swedish National Archives regulations Certification not according to the Swedish National Archives regulations: Ageing-resistant paper Archival paper Writing aid for writing on paper Document covers Archive boxes RA-FS 2006:4 including changes until RA-FS 2016:1 SS-EN ISO 9706 rev 1 SS-ISO rev 1 SS-ISO rev 1 ISO rev 1 ISO rev 1 Fire resisting filing cabinets and data cabinets NT Fire 017 edition 3 5 SPCR 002 Cement EN 197-1:2011 EN 197-2:2000 SS : CR 058 1(6)
2 SS :2014 SS :2014 REACH, article 67 and annex XVII, item 47 (concerning watersoluble chromate) Energy labelled windows EQ-windows rev Packagings for dangerous goods MSBFS 2009:5 5 SPCR 059 Alarm systems SS-EN :2007 SS-EN :2009 SS-EN :2009 SS-EN :2008 SS-EN :1998/ A2: SPCR 180 Measuring systems, and parts thereof, for liquids other than water OIML Automatic catchweighing instruments Automatic gravimetric filling instruments Annex I, III och B in STAFS 2006:4 STAFS 2006:9 OIML R 117-1:2007 OIML R 118:1995 OIML R 51-1: err 2010 OIML R 51-2:2006 OIML R 61-1:2004 OIML R 61-2: SPCR 181 1a SPCR 173 2(6)
3 Non-automatic weighing instruments Automatic level gauges for measuring the level of liquid in stationary storage tanks OIML R 76-1:2006 OIML R76-2:2007 OIML R 85-1 & 2:2008 OIML R 85-3:2008 Dynamic measuring systems for liquids other than water Metrological regulation for load cells OIML R 117-1:2007 OIML R 117-2:2014 OIML R 117-3:2014 OIML R 60:2000 Ladders and work trestles AFS 2004:3 1a SPCR 064 Produsentforskriften utgåva 6 desember 2011 nr 1359 till och med 22 december 2016, nr 1837, only ladders and work trestles 1a SPCR 064 Scaffolding systems and connections AFS 2013:4 SPCR 064 Technical equipment in declaration systems for taxi traffic Certification according to the Swedish Transport Agency s regulation TSFS 2016:47 5 SPCR 196 Additive devices for taximeters STAFS 2012:5 6 SPCR 179 Pre-mixed dry mortar CR 059: CR 059 3(6)
4 Licensed radio service equipment Unlicensed radio frequencies devices TCB v03r01, only B1, B2, B TCB v03r01, only A1, A2, A4 3 SPCR SPCR 125 Prepacked products STAFS 2017:1 5 SPCR 001 Administration For the following areas, no new certificates are issued. Surveillance is performed according to the applicable certification scheme. Product Standard/ normative document Certification scheme according to ISO/IEC 17067:2013 tabell 1 Certification rules Electricity meters and additive equipment SPCR 090 aug SPCR 090 Admixtures for concrete SPCR 048 mars SPCR Scope of accreditation Certification of processes PEFC Certification rules Normative document Product/process PEFC SWE 005:4 PEFC SWE TD IV Sweden Direct certification PEFC 2003:2012 PEFC ST 2002:2013 Chain of custody 4(6)
5 3 Scope of accreditation Certification of products with flexible accreditation The flexible accreditation cover the following product areas: Product area 2 *) Doors, windows, shutters, gates and related building hardware 29 *) Construction products in contact with water intended for human consumption Thermal solar systems and solar collectors Recycling of nutrients SS-EN SS-EN SS-EN Specific CEN Keymark Scheme Rules for Solar Thermal Products Requirements for the scheme REVAQ, recycling of nutrients Product areas marked with *) cover certification of construction products according to applicable requirements in the Swedish building regulations (BBR) and the Swedish planning and building act (PBL). The scope of accreditation is flexible as specified in this decision. The accredited body must always retain a current list of the scope for which it is accredited. 5(6)
6 4 Scope of accreditation Certification of control units for cash registers Certification according to: The Swedish Tax Agency s regulations on control units for cash registers, SKVFS 2009:2 and The Swedish Tax Agency s regulations on changes in regulation (SKVFS 2009:2) control units for cash registers, SKVFS 2009:12 The Swedish Tax Agency s regulations on changes in regulation (SKVFS 2009:2) control units for cash registers, SKVFS 2012:5 With regard to WELMEC 7.2 and WELMEC 2.2. Certification is performed in accordance with ISO/IEC 17067:2013 scheme type 5, excluding extending open market. 6(6)
Directive and standards of DHC-metering
NORDISK FJERNVÄRMESYMPOSIUM ÅLESUND, 12. 15. JUNI Tuesday, 15. June 2004 Directive and standards of DHC-metering Veikko Hokkanen, Helsinki Energy The MID Directive of the European Parliament and of the
More informationEU-TYPE EXAMINATION CERTIFICATE
0402-MID-385402 Water meter Vesiverto V-15M Issued to: Address: Vercon Oy Hopunkatu 11, FI38200, SASTAMALA, Finland In respect of (type of instrument) Water meter for cold (T30) and hot water (T30/90).
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Activities trading under the names and Kiwa Telefication Fire alarm/detection
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationISO 6396 INTERNATIONAL STANDARD. Earth-moving machinery Determination of emission sound pressure level at operator's position Dynamic test conditions
INTERNATIONAL STANDARD ISO 6396 Second edition 2008-03-15 Earth-moving machinery Determination of emission sound pressure level at operator's position Dynamic test conditions Engins de terrassement Détermination
More informationTermometrar med visare
SVENSK STANDARD SS-EN 13190 Fastställd 2001-11-30 Utgåva 1 Termometrar med visare Dial thermometers ICS 01.040.17; 71.200.20 Språk: engelska Tryckt i januari 2002 Copyright SIS. Reproduction in any form
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12039 First edition 2001-06-15 Stationary source emissions Determination of carbon monoxide, carbon dioxide and oxygen Performance characteristics and calibration of automated
More informationISO 6393 INTERNATIONAL STANDARD. Earth-moving machinery Determination of sound power level Stationary test conditions
INTERNATIONAL STANDARD ISO 6393 Third edition 2008-03-15 Earth-moving machinery Determination of sound power level Stationary test conditions Engins de terrassement Détermination du niveau de puissance
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationFönster och dörrar Mekanisk livslängd Krav och klassificering. Windows and pedestrian doors Mechanical durability Requirements and classification
SVENSK STANDARD SS-EN 12400 Fastställd 2002-11-08 Utgåva 1 Fönster och dörrar Mekanisk livslängd Krav och klassificering Windows and pedestrian doors Mechanical durability Requirements and classification
More informationSVENSK STANDARD SS-ISO :2005. Anläggningsmaskiner Synfält för sikt- och backspeglar Del 2: Prestandakrav (ISO :2004, IDT)
SVENSK STANDARD SS-ISO 14401-2:2005 Fastställd 2005-12-28 Utgåva 1 Anläggningsmaskiner Synfält för sikt- och backspeglar Del 2: Prestandakrav (ISO 14401-2:2004, IDT) Earth-moving machinery Field of vision
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins de terrassement Champ de visibilité
More informationSVENSK STANDARD SS-EN ISO :2007. Motståndssvetsning Mätning av svetsström Del 4: Kalibreringssystem (ISO :2005)
SVENSK STANDARD SS-EN ISO 17657-4:2007 Fastställd 2007-06-28 Utgåva 1 Motståndssvetsning Mätning av svetsström Del 4: Kalibreringssystem (ISO 17657-4:2005) Resistance welding Welding current measurement
More informationISO 9001 CERTIFIKAT CERTIFICATE. nr/no Härmed intygas att:/this is to certify that:
ISO 9001 CERTIFIKAT SP är ett av SWEDAC ackrediterat organ för certifiering av ledningssystem för kvalitet SP is a Certification Body, accredited by SWEDAC, for certification of quality management systems
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
More informationSýnishorn ISO 7183 INTERNATIONAL STANDARD. Compressed-air dryers Specifications and testing. Sécheurs à air comprimé Spécifications et essais
INTERNATIONAL STANDARD ISO 7183 Second edition 2007-12-15 Compressed-air dryers Specifications and testing Sécheurs à air comprimé Spécifications et essais Reference number ISO 7183:2007(E) ISO 2007 PDF
More informationE.Q.A. (IRELAND) LIMITED
15 Greenmount House, Greenmount Office Park, Harold's Cross, Dublin 6W Management Systems Certification Body Registration number: 5005 is accredited by the Irish National Board (INAB) to undertake certification
More informationThis second part of the lesson & is dedicated to EMC legal aspect and standards.
This second part of the lesson & is dedicated to EMC legal aspect and standards. We should begin by a first part on the last version of the European directive 2014/30/UE which concerns electronic products
More informationAUGUST 2016 CONTENTS:
EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.
More informationSVENSK STANDARD SS-EN ISO 15652:2005. Båtar Styrsystem för småbåtar med inombordsvattenjetmotorer
SVENSK STANDARD SS-EN ISO 15652:2005 Fastställd 2005-03-18 Utgåva 1 Båtar Styrsystem för småbåtar med inombordsvattenjetmotorer (ISO 15652:2003) Small craft Remote steering systems for inboard mini jet
More informationE.Q.A. (IRELAND) LIMITED
Office A, Second Floor, Citywest Shopping Centre, Citywest Business Park, Dublin 24 Management Systems Certification Body Registration number: 5005 is accredited by the Irish National Board (INAB) to undertake
More informationSVENSK STANDARD SS-ISO 2878:2005. Gummi Antistatiska och ledande produkter Bestämning av elektrisk resistans (ISO 2878:2005, IDT)
SVENSK STANDARD Fastställd 2005-09-02 Utgåva 2 Gummi Antistatiska och ledande produkter Bestämning av elektrisk resistans (ISO 2878:2005, IDT) Rubber Antistatic and conductive products Determination of
More informationISO 2896 INTERNATIONAL STANDARD. Rigid cellular plastics Determination of water absorption
INTERNATIONAL STANDARD ISO 2896 Third edition 2001-07-01 Rigid cellular plastics Determination of water absorption Plastiques alvéolaires rigides Détermination de l'absorption d'eau Reference number ISO
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests
INTERNATIONAL STANDARD ISO 16001 First edition 2008-02-15 Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests Engins de terrassement Dispositifs de détection
More informationPlast Utveckling och användning av brandtester i mellanskala för plastprodukter Del 1: Allmän vägledning
SVENSK STANDARD SS-ISO 15791-1 Fastställd 2003-10-31 Utgåva 1 Plast Utveckling och användning av brandtester i mellanskala för plastprodukter Del 1: Allmän vägledning Plastics Development and use of intermediatescale
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique
More informationISO Plastics Film and sheeting Determination of water vapour transmission rate Infrared detection sensor method
INTERNATIONAL STANDARD ISO 15106-2 First edition 2003-01-15 Plastics Film and sheeting Determination of water vapour transmission rate Part 2: Infrared detection sensor method Plastiques Film et feuille
More informationISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres
INTERNATIONAL STANDARD ISO 13985 First edition 2006-11-01 Liquid hydrogen Land vehicle fuel tanks Hydrogène liquide Réservoirs de carburant pour véhicules terrestres Reference number ISO 13985:2006(E)
More informationRENAR Accreditation Activities
RENAR accreditation activities represent the scopes where RENAR has competence to provide accreditation services. RENAR defined its accreditation activities in accordance with the EA MLA scope (EA multilateral
More informationPiston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
EESTI STANDARD EVS-EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error Piston-operated volumetric apparatus - Part 6: Gravimetric
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14401-2 Second edition 2009-08-15 Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria Engins
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK to provide product conformity Stocking Lane High Wycombe Buckinghamshire HP14 4ND Contact: Mr Alan Gower Tel: +44 (0)1494 569700 Fax: +44
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation
INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la
More informationSkyddshandskar för brandmän. Protective gloves for firefighters
SVENSK STANDARD SS-EN 659:2004 Fastställd 2004-10-08 Utgåva 2 Skyddshandskar för brandmän Protective gloves for firefighters ICS 13.340.10; 13.340.40 Språk: engelska Publicerad: november 2004 Copyright
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine
INTERNATIONAL STANDARD ISO 19954 First edition 2003-10-01 Footwear Test methods for whole shoe Washability in a domestic washing machine Chaussures Méthodes d'essai s'appliquant à la chaussure entière
More informationISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests
INTERNATIONAL STANDARD ISO 7439 Second edition 2002-03-15 Copper-bearing intra-uterine contraceptive devices Requirements, tests Dispositifs intra-utérins contenant du cuivre Spécifications, essais Reference
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 1670:2007 Fastställd 2007-03-23 Utgåva 2 Byggnadsbeslag Korrosionsmotstånd Krav och provningsmetoder Building hardware Corrosion resistance Requirements
More informationISO INTERNATIONAL STANDARD. Ophthalmic optics and instruments Electro-optical devices for enhancing low vision
INTERNATIONAL STANDARD ISO 15254 Second edition 2009-07-01 Ophthalmic optics and instruments Electro-optical devices for enhancing low vision Optique et instruments ophtalmiques Dispositifs électro-optiques
More informationISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
More informationSPCR 183. RISE Research Institutes of Sweden AB Certification SPCR
SPCR 183 ignature_1 Certification rules for Fire suppression systems in engine compartments of buses and coaches RISE Research Institutes of Sweden AB Certification SPCR 183 2017-09-08 2 Preface Products
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationSVENSK STANDARD SS-EN
SVENSK STANDARD SS-EN 13395-4 Fastställd 2002-10-18 Utgåva 1 Betongkonstruktioner Provning av produkter och system för skydd och reparation Arbetbarhet Del 4: Applicerbarhet av bruk på undersida av konstruktion
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés
More informationQAiST WP2 and 6 A status report
QAiST WP2 and 6 A status report ESTIF STD&C meeting December 2 nd 2010 Peter Kovács* and Jan Erik Nielsen *) SP Technical Research Institute of Sweden peter.kovacs@sp.se +46 706524802 Summary of presentation
More informationSýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test
INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-06 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen
More informationStandardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
More informationISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding
INTERNATIONAL STANDARD ISO 12499 First edition 1999-10-15 Industrial fans Mechanical safety of fans Guarding Ventilateurs industriels Sécurité mécanique des ventilateurs Protecteurs A Reference number
More informationSVENSK STANDARD SS-EN ISO 7547:2005
SVENSK STANDARD SS-EN ISO 7547:2005 Fastställd 2005-01-28 Utgåva 1 Ships and marine technology Air-conditioning and ventilation of accommodation spaces Design conditions and basis of calculations (ISO
More informationISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
More informationSwedish Technical Approval SC
Swedish Technical Approval SC0840-09 and decision on production control, in accordance with chapter 8, 22 and 23 Planning- and Building Act (2010:900), PBL Swing door operator EM SW EMO Holder Entrematic
More informationEAK AKREDITEERITAVAD TAVAD VASTAVUSHINDAMISMENETLUSED EAK INF1 2016
EAK AKREDITEERITAVAD TAVAD VASTAVUSHINDAMISMENETLUSED MENETLUSED CONFORMITY ASSESSMENT ACTIVITIES ACCREDITABLE BY EAK EAK INF1 2016 Translation from Estonian Tallinn 2016 2/7 Authorship and principles
More informationPlast Formsprutning av provkroppar av termoplast Del 4: Bestämning av formkrympning (ISO 294-4:2001)
SVENSK STANDARD SS-EN ISO 294-4 Fastställd 2003-03-07 Utgåva 2 Plast Formsprutning av provkroppar av termoplast Del 4: Bestämning av formkrympning (ISO 294-4:2001) Plastics Injection moulding of test specimens
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21896-6 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum This national standard is a modified adoption
More informationFG-400:2. Product registration Anti-intruder products applicable to burglary and thefts insurance. Gyldig fra
FG-400:2 Product registration Anti-intruder products applicable to burglary and thefts insurance Gyldig fra 31.12.17 Product registration Anti-intruder products applicable to burglary and theft insurance
More informationPlast Formsprutning av provkroppar av termoplast Del 3: Små plattor (ISO 294-3:2002)
SVENSK STANDARD SS-EN ISO 294-3 Fastställd 2003-08-08 Utgåva 2 Plast Formsprutning av provkroppar av termoplast Del 3: Små plattor (ISO 294-3:2002) Plastics Injection moulding of test specimens of thermoplastic
More informationContents CONTENTS FOREWORD REGISTRATION REGISTRATION PERIOD DISCONTINUATION OF PERFORMANCE SPECIFICATIONS...
Contents CONTENTS... 2 1. FOREWORD... 3 2. REGISTRATION... 3 3. REGISTRATION PERIOD... 4 4. DISCONTINUATION OF PERFORMANCE SPECIFICATIONS... 4 5. APPLICATION FOR REGISTRATION... 4 6. DEFINITIONS... 5 APPENDIX
More informationLekredskap Del 1: Allmänna säkerhetskrav och provningsmetoder. Playground equipment Part 1: General safety requirements and test methods
SVENSK STANDARD SS-EN 1176-1 Fastställd 1998-11-20 Utgåva 1 Lekredskap Del 1: Allmänna säkerhetskrav och provningsmetoder Playground equipment Part 1: General safety requirements and test methods ICS 97.190;
More informationSchedule of Accreditation
Schedule of Accreditation Organisation Name Trading As INAB Reg No 6023 Contact Name Address BRE Global Assurance (Ireland) Ltd David Gall Contact Phone No +353 1 882 4344 Email Website Accreditation Standard
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
More informationSVENSK STANDARD SS-EN ISO :2005
SVENSK STANDARD SS-EN ISO 8536-9:2005 Fastställd 2005-01-28 Utgåva 1 Infusionsutrustning för medicinskt bruk Del 9: Slangsystem för infusion med övertryck för engångsbruk (ISO 8536-9:2004) Infusion equipment
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 16: Sound system control and indicating equipment
INTERNATIONAL STANDARD ISO 7240-16 First edition 2007-07-01 Fire detection and alarm systems Part 16: Sound system control and indicating equipment Systèmes de détection et d'alarme d'incendie Partie 16:
More informationAdditional deviations may possibly be found if a complete type test is carried out on the product.
Diary No. 13EV4171 Reference No 1315333 MARKET SURVEILLANCE TEST REPORT - LVD The tests cover parts of the requirements for AC adapter stated in the standard SS-EN 60950: 2006 + A11 + A1 + A12 and EN 50075.
More informationGuidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU
GNB-CPR AG Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU NB-CPR/AG/03/002r3 Issued: 24 May 2013 APPROVED GUIDANCE GNB-CPR AG position paper Guidance to
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Insight Certification Limited Trading as National Security Inspectorate, Ensign Certification Services and CerticCS Accredited to ISO/IEC 17021-1:2015 to provide quality Sentinel House 5 Reform Road Maidenhead
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10302-1 First edition 2011-01-15 Acoustics Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Part 1: Airborne noise measurement
More informationAnnex of the certificate (Page 1/1) Accreditation Scope
Accreditation Nr: ISO 22000:2005 Food Safety Management System Certification Address : E-Mail Website : kys@szutest.com.tr : www.szutest.com.tr Class/Category Food and Feed Processing - C Food and Feed
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3864-4 First edition 2011-03-15 Graphical symbols Safety colours and safety signs Part 4: Colorimetric and photometric properties of safety sign materials Symboles graphiques
More informationSolar Keymark in Europe. DI (FH) Gundula Tschernigg AIT Austrian Institute of Technology
Solar Keymark in Europe DI (FH) Gundula Tschernigg AIT Austrian Institute of Technology What may have the following things in common? floor heating waste water pipe thermal insulation cast iron pipes sun
More informationFästelement Plana rundbrickor Produktklass A (ISO 7089:2000) Plain washers Normal series Product grade A (ISO 7089:2000)
SVENSK STANDARD SS-EN ISO 7089 Fastställd 2000-07-28 Utgåva 1 Fästelement Plana rundbrickor Produktklass A (ISO 7089:2000) Plain washers Normal series Product grade A (ISO 7089:2000) ICS 21.060.30 Språk:
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for uppers and lining Water vapour permeability and absorption
INTERNATIONAL STANDARD ISO 17699 First edition 2003-10-15 Footwear Test methods for uppers and lining Water vapour permeability and absorption Chaussures Méthodes d'essai des tiges et des doublures Perméabilité
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO
More informationISO 7183 INTERNATIONAL STANDARD. Compressed-air dryers Specifications and testing. Sécheurs à air comprimé Spécifications et essais
INTERNATIONAL STANDARD ISO 7183 Second edition 2007-12-15 Compressed-air dryers Specifications and testing Sécheurs à air comprimé Spécifications et essais Reference number ISO 7183:2007(E) ISO 2007 PDF
More informationISO/TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 10811-1 First edition 2000-06-01 Mechanical vibration and shock Vibration and shock in buildings with sensitive equipment Part 1: Measurement and evaluation Vibrations et
More informationISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
More informationSVENSK STANDARD SS-EN ISO Tandvård Dentala material Legeringspulver (alloys) för amalgam (ISO 1559: Technical Corrigendum 1:1997)
SVENSK STANDARD SS-EN ISO 1559 Fastställd 2002-11-01 Utgåva 1 Tandvård Dentala material Legeringspulver (alloys) för amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997) Dental materials Alloys for dental
More informationSVENSK STANDARD SS-EN ISO
SVENSK STANDARD SS-EN ISO 3098-3 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 2000-07-28 1 1 (1+7) Copyright SIS. Reproduction in any form without permission is prohibited.
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60896-11 First edition 2002-12 Stationary lead-acid batteries Part 11: Vented types This English-language version is derived from the original bilingual publication by leaving
More informationRoad traffic noise reducing devices Specifications
SVENSK STANDARD SS-EN 14388:2005 Fastställd 2005-07-28 Utgåva 1 Vägutrustning Bullerskydd Specifikationer Road traffic noise reducing devices Specifications ICS 93.080.30 Språk: engelska Publicerad: september
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives
INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries
More informationJoint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
More informationSVENSK STANDARD SS-EN 13827:2004. Transportband med stålstomme Bestämning av vertikal och tvärförflyttning av stållinor
SVENSK STANDARD SS-EN 13827:2004 Fastställd 2004-01-23 Utgåva 1 Transportband med stålstomme Bestämning av vertikal och tvärförflyttning av stållinor Steel cord conveyor belts Determination of the lateral
More informationFire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
More informationISO/TS TECHNICAL SPECIFICATION. Road vehicles Air filters for passenger compartments Part 1: Test for particulate filtration
TECHNICAL SPECIFICATION ISO/TS 11155-1 First edition 2001-11-01 Road vehicles Air filters for passenger compartments Part 1: Test for particulate filtration Véhicules routiers Filtres à air pour l'habitacle
More informationISO INTERNATIONAL STANDARD. Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions
INTERNATIONAL STANDARD ISO 15003 First edition 2006-02-15 Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions Génie agricole Matériel électrique
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
More informationEC PARTS CERTIFICATE GB-1432
EC PARTS CERTIFICATE GB-1432 Issued by: National Measurement Office The equipment has been examined in accordance with WELMEC Guide 8.8 Issue 1 (General and Administrative Aspects of the Voluntary System
More informationPOLYMER MANAGEMENT IN DIFFERENT INDUSTRIES
POLYMER MANAGEMENT IN DIFFERENT INDUSTRIES Anna Jansson Forsmark December 4. 2018 RISE Research Institutes of Sweden Biovetenskap och Material Kemi och Material Outline Background Examples of some product
More informationExplosiv atmosfär Tillämpning av kvalitetssystem. Potentially explosive atmospheres Application of quality systems
SVENSK STANDARD SS-EN 13980 Fastställd 2002-11-15 Utgåva 1 Explosiv atmosfär Tillämpning av kvalitetssystem Potentially explosive atmospheres Application of quality systems ICS 03.120.10; 13.230 Språk:
More informationSound absorption coefficient Equivalent sound absorption area Sound absorption coefficient Sound absorption class
Annex 1 to the Accreditation Certificate No. LA.01.028 issued on 18-12-2015, approved on 18-12-2015 by the Order No. AK-200 of Director of National Accreditation Bureau under the Ministry of 1 (8) pages
More informationISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method
INTERNATIONAL STANDARD ISO 16032 First edition 2004-09-15 Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method Acoustique Mesurage du niveau de pression
More informationMassa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004)
SVENSK STANDARD SS-EN ISO 5263-1:2004 Fastställd 2004-10-01 Utgåva 1 Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO 5263-1:2004) Pulps Laboratory wet disintegration Part
More informationSVENSK STANDARD SS-EN ISO 9787
SVENSK STANDARD SS-EN ISO 9787 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-05-28 1 1 (1+14) Copyright SIS. Reproduction in any form without permission is prohibited.
More informationhttp://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se SVENSK STANDARD SS-EN 14845-1:2007 Fastställd 2007-07-11 Utgåva 1 Provning av fibrer för betong Del 1: Referensbetong
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationSVENSK STANDARD SS-EN ISO 15973
SVENSK STANDARD SS-EN ISO 15973 Fastställd Utgåva Sida 2000-12-29 1 1 (1+8) Copyright SIS. Reproduction in any form without permission is prohibited. Closed end blind rivets with break pull mandrel and
More information