E instruments. General Catalog Global Smart Measurement Solutions. Bulletin GEN - ed

Transcription

1 E instruments General Catalog 2015 Global Smart Measurement Solutions Infrared Thermometers Calibrators d ea Bulletin GEN - ed : ah e» tep g s yin ne l f «so e Th way al! Flue Gas Analysers

2 E instruments IRtech Infrared Thermometers Infrared Thermometers and Thermal Image Camera process & portable IRtech Infrared Technology Temperature range up to 3000 C Optical resolution up to 300:1 Spectral response : 8-14µm ( low temperature ) 1µm, 1.6µm ( high temperature ) 3.9, 2.3µm ( medium temperature ) 4.2µm, 4.6µm ( gas ) 5.1µm ( glass surface ) 7.9µm ( plastic film ) Dual color Dual laser pointer Compact head 12x28mm work up to 250 C ambient temperature without cooling 1mS response time Bulletin GEN IR - ed Signal Output : mv, V, 4-20mA USB, RS485, RS232 Ethernet CAN-Bus Profibus DP Relay Each body, at temperatures above the absolute zero (-273 C or 0K),emits energy as electromagnetic radiation. When temperature rises,the intensity of this infrared energy increases.the temperature of the body surface can therefore be determined by measuring the intensity of this energy in a small spectral band: the infrared region. The instruments used to measure this energy and to calculate the related temperature are called infrared thermometers or non-contact thermometers. Temperature measurements of a liquid or gaseous compound have been successfully made with thermoelectric or expansion thermometers, thanks to the good thermal exchange of the sensor with the fluid. With solid bodies, a good thermal exchange is difficult to be obtained and an additional measuring error should be considered. When the target is moving or is electrically hazardous, a contact temperature measurement can t be made. Noncontact IR temperature measurement could be the only solution to the above application problems. Typical application of IRtech portable thermometers is to control temperature where an increase of its value means a possible machine wearing, aging, faulting, etc. Features are related to the best of each model equipped with full configuration.

3 IRtech Infrared Thermometers and Thermal Image Camera process & portable Process Fixed Models Portable Models IRtech Infrared Thermometers Infrared Technology Micro Series : IR6 IR10 IR12 Fiber Optic Series : IR60&100 - Fiber optic up to 22mt (up to 250 C) - Standard or Remote Programmable Display with laser pointer - Temperature up to 1800 C - Spectral response : 2 color, 1µm, 1.6µm - Optics up to 80:1 with variable focus - Output : V,4-20mA,Thermocouple - USB RS232 RS485 CANBus Profibus DP Ethernet interface / Dual Alarms board - Compact M12 (IR mm IR6 87mm) - Temperature up to 900 C - Optics up to 10:1 - IR6 : Volt output IR10-12 : 2-wire 4-20mA - USB output / IR6 : Built-in alarm led MiniRay - Compact : 190 mm gr - Temperature up to 760 C - Laser pointer with Optics up to 40:1 - Thermocouple Tc K input - USB and Software TRX Series : IR40 - Stainless steel housing M48 - Temperature up to 1600 C - Spectral response : 8-14µm, 1.6µm - Optics up to 300:1 with dual laser - Analog output : 2-wire 4-20mA - USB digital output and Alarm Pro 880 High performance Series : M - Standard and Fiber optic - Through lens sighting - Temperature up to 4000 C - Spectral response : 2 color, µm - Optics with variable focus - Temperature up to 900 C - Laser pointer with crosshair - Dual switchable optics ( macro-tele) up to 75:1 or 1mm - Thermocouple Tc K input Memories, USB and Software Split Compact Head with remote display Series : IR14 - Compact M12 28mm head with Remote Programmable Display - Up to 250 C ambient temperature without cooling - Temperature up to 1600 C - Spectral response : 8-14µm,1µm,1.6µm 2.3µm,5.1µm and 7.9µm - Optics up to 75:1 - Output : V,4-20mA,Thermocouple - USB RS232 RS485 CANBus Profibus DP Ethernet interface / Dual Alarms board - ATEX kit Pro 1100 / 1330 / 2200 Thermal Image : TImage - Compact 45x45x62mm IP67 - Process fixed and portable use - Temperature up to 900 C - Fast 100Hz with USB 2.0 output - Analog/ digital I/O - Interchangeable lens 9,31,64 - Standard PC realtime software - Temperature up to 1800 C - Dual laser pointer - Telescope visual sighting - Optics up to 300: measures datalogger - USB and Software - Advanced dual laser M48 head with Remote Programmable Display - Temperature up to 1800 C - Spectral response : 8-14µm, 1µm, 1.6µm 2.3µm, 3.9µm, 4.2µm, 4.6µm, 5.1µm and 7.9µm - Optics up to 300:1 - Output : V,4-20mA,Thermocouple - USB RS232 RS485 CANBus Profibus DP Ethernet interface / Dual Alarms board IR Software - IR softwares for process fixed, for portable units and for thermal image camera. - Real time Graphic display - Datalogging - Advanced signal processing capability - Reporting 26 - Temperature up to 1500 C - Resolution 160x120 or 384x288 - TFT Lcd display 3,6" - Visible Camera 2MP with Fusion - SD Memory card & video recording - USB port and Windows Software Specifications may change without notice Timage Pro Split with Laser Series : IR20

4 E instruments ECOline OLS Combustion Flue Gas Analysers for Industrial applications ECOline Combustion Gas Analysis Up to 9 sensors : O2 CO CO2 NO NO2 NOx SO2 H2S CxHy electrochemical or NDIR Temperature Pressure / Draft / Flow Built-in Peltier Gas dryer Heated tube & probe Battery powered Datalogger Analog outputs Built-in Printer Bulletin GEN GAS - ed Graphic LCD display The Clean Air Act,promulgated in U.S.A. in 1970, was certainly the first law that regulates air emissions from area, stationary and mobile source. EPA (Environmental Protection Agency) and other country or state Regulatory Agencies verify affordable and reasonable methods of achieving environmental compliance to verify stated emissions limits. A number of official Protocols have been promulgated to verify industrial emissions using portable analyzers to ensure air quality compliance. These Protocols are the guidelines that prescribe the technical performances of the electrochemical sensor based analyzers to be used, as well as calibration and testing procedures which should be followed to assure valid emission data. Features are related to all models equipped with full configuration. On next pages you can find specific details.

5 ECOline ECOline Sensonic IR Combustion Flue Gas Analysers for Industrial applications Combustion Gas Analysis Portable Models Online Models ECOline Mk3 ECOline Graphic display - Up to 3 sensors O2 CO NOx - Flue and Air Temperature - Pressure, Draft and Flow - CO ambient 0,1ppm - External compact printer - Datalogger, RS232/USB, Windows software - Efficiency/Excess of Air/CO2 calculation - Average of measured analysis - EN50379 compliant - 64 complete analysis memories - Internal firmware upgradeable - RH relative humidity probe - Programmable fuels ( up to 10 ) - Magnetic plate Specifications as 4000 plus : - Up to 8 sensors O2 CO NOx NO2 SO2 H2S CO2, CxHy NDIR - Built-in cooler - dryer - Heated tube and Probe - 3 analogs inputs ( ma/v - Tc - Therm. ) - 2 optional analog outputs ECOline IR Specifications as 4000 plus : - 7 sensor NDIR CO NOx NO2 SO2 N2O CO2, CxHy - Large LCD 320x240 graphic display - Advanced dual line filtering - 256K MMC memory for datalogging - 8 optional analogs inputs ( Tc - Therm. ) - 8 optional analog outputs ECOline 1400 Specifications as Mk3: - Up to 4 sensors O2 CO NOx NO2 SO2 - Smoke test with internal pump - 64 complete analysis memories - Low draft 0,1 Pa probe ECOline OLS100,200,300,400 - On line combustion analyser - 1,2,3 or 4 gas models - Sensors O2 partial pressure CO NO NO2 SO2 H2S electrochem. CO.CO2,N2O, CH4 NDIR - Draft & Temperature - Peltier dryer, condensation pump - Datalogger with RS232/RS485-4 analog output (V/mA) ECOline AB Landfill & Biogas - Portable unit - Measurement of CO2 60%, CH4 70%, H2S 700ppm, CO 2%,NH3 1000ppm O2 25% - Built-in pump and memory Software - Windows software - Datalogging - Graphics trend - Save on PC - Connect via RS232/USB to analysers ECOline Mini LV Vane Anemometer - Mini VT Hot Wire Anemometer - Mini HD Thermo Hygrometer - Mini CT Tachometer - Mini TK Tc K Thermometer 2 channels - Mini MP Pressure meter 26 Gas Detector (safety) - Fixed and Portable - Single and four gases - ATEX - Multichannel control station Specifications may change without notice T&M Complementary Specifications as 1400 plus : - Built-in impact printer - Up to 4 sensors O2 CO NOx NO2 SO2 H2S CO2, CxHy NDIR - 3 analogs inputs ( ma/v - Tc - Therm. ) complete analysis memories

6 E instruments MAXiCAL Advanced Process Signal, Temperature and Pressure Calibrators MAXiCAL Process Multifunction Calibrators Signal Tc, Rtd, ma, mv, V, Hz, Pulse Temperature dry-block and liquid from -50 C up to 1200 C WS Tc and Pt100 thermomters Pressure up to 700 Bar (10KPSI) with pressure generator Hart protocol ATEX model Documenting calibrator High Accuracy Rechargeable batteries Bulletin GEN CAL - ed Graphic LCD display Calibration can be briefly described as an activity where the instrument being tested is compared to a known reference value. At the simplest level, calibration is a comparison between measurements one of known magnitude or correctness made or set with one device, and another measurement made in as similar a way as possible with a second device. The device with the known or assigned correctness is called the standard. The second device is the unit under test or test instrument. Calibration is often required with a new instrument or when a specified time period or a specified number of operating hours has elapsed. In addition, calibration is usually carried out when an instrument has been subjected to an unexpected shock or vibration that may have put it out of its specified limits. Features are related to all models equipped with full configuration. On next pages you can find specific details.

7 MAXiCAL MAXiCAL Advanced Process Signal, Temperature and Pressure Calibrators Process Multifunction Calibrators Signal process Models Pressure Models PPC MaxiCAL Tc/ RTD / Loop Manometer Calibrator PPC MaxiCAL TEMP Compact&Basic - High accuracy manometers 0,05% - Pressure up to 1000 Bar - Compact : LOT -10 a 110 C. MT 35 a 300 C - Basic : LOT -24 C+125 C, MTL Amb C and MT Amb to +650 C - Loop : In/Out mv,v,ma. 24V PS for loop. - Rtd : In/out RTD and Ohm Pt10,Pt50,Pt100,Pt200,Pt500,Pt Tc : In/Out TC J,K,T,E,R,S,B,N & mv - Alkaline batteries MaxiCAL PPC 273 pressure calibration kit - Pressure calibration & Signal, HART accuracy 0,02% - Pressure from mbar to 2500 Bar - Differential, gauge and absolute MaxiCAL TRX Multifunction Temperature Models TEMP MaxiCAL TEMP - LOT : -55 to 140 C. Liquid+Dryblock - MT : Amb to 650 C Dryblock - HT : 150 to 1200 C Dryblock - Black Body Insert - Simultaneous measure/generation - Loop : ma 24VPS, V - Thermocouple, Rtd - Graphic display - Easy setting with in-line keyboard - Step, ramp, logging with SD card - LiION battery MaxiCAL TEMP PRO MaxiCAL PPC300 - Pressure calibration & Signal 0,025% - Documenting - Pressure from up to 1000 Bar Documenting Calibrator MF4010 Hart Programmer MF Color High resolution TFT Display - Documenting - Thermocouple and Rtd - Loop, mv, Volt, Frequancy & Pulse - Pressure module up to 700 Bar - Hart option - LiION rechargeable batteries - Digital interface & Software - Modular calibrators - Documenting with Graphic display - Rugged with rubber holster - 3 modules capability - Tc, Loop, Rtd, Pressure modules - Hart programmer communicator ATEX - Device profiles upgradeable - Clone/Upload/Download/Off line 26 Working Standard Thermometers - WS Pt100 working standard thermometer - WS Tc S, Tc K standard thermometer SOLAS Marine Cal Kit - Temperature up to 600 C - Pressure pneumatic & hydraulic - IP67 robust case Specifications may change without notice MaxiCAL 310 Documenting Multifunction - LOT : -45 to 150 C Dry block - LOT Fluid : -30 to 125 C fluid bath - MT Fluid : Ambient to 200 C fluid bath - MT : Ambient to 600 C Dry block - HT : 200 to 1150 C Dry block - Dual channel input Tc / Rtd - Switch test

8 E instruments group Technical consulting Infrared Thermometers Training Course Calibrators Service & Calibration Flue Gas Analysers Bulletin GEN - ed E instruments born on 25 years experience. The know-how is technical ( more than twenty products was developed in the past ) to commercial competences on the global market. The support start from consultancy on how to solve the application selecting the right product, passing to the supply of the products, granting after sales support. The internal laboratory is able to provide warranty, service and calibration support. Our line of products use cutting edge technology at competitive price. We offer you smart measurement solutions, just what you need to solve your application at the best. Italian know-how with international recognition. We are proud of it! Guido Moro - CEO distributed by : E Instruments Group Srl mail : info@eigroup.biz