RFP Grand Entry Canopies Addendum 002 Issued July 16, 2013

Transcription

1 RFP Grand Entry Canopies Addendum 002 Issued July 16, RFP s Due July 19 - Interviews if Necessary July 26 - RFP Awarded August 2 1) Will there be an electrical plan provided? Electric is design build we have provided lighting fixture specifications and layout. 2) In the past CMC has provided electrical fixtures (i.e., recessed cans). Will CMC be providing any or all lighting fixtures including those for Alternate #1? Fixtures to be provided by contractor. 3) Need clarification on detail 8/S.0 as far as how far does the fascia extend past the structural beam. This should be coordinated with the architect and field verified. 4) How often will detail 7/S.0 be needed in order to support the ledger? For PL connections of ledger to bean, (4) total with one each end & (2) equally spaced at about third points. Also, the bearing PL 3/8 x 3 x 3 should be installed at each as shown on the bid set dated 6/7/13. 5) Need confirmation that we are to use detail 13/S.0 for connection of the beams at the ends of the fascia on the north canopy. Yes 6) The fascia plate will need to be fabricated in sections and field welded together due to the length of the rolled section. Does the Architect have a preference where we make the field weld or is there a bolted connection detail that he can provide to make the connection? Bolted connection in the middle if 2 section, or at third points if 3 sections. 7) After reviewing the plans for the existing building, it appears that there is a stub column supporting the second floor window wall that may be attached to the beam to be removed as part of Alternate #1. Please confirm whether or not shoring will be required during removal and replacement of this beam. This beam supports a section of the 2 nd level floor and a window/curtain wall at the 2 nd level. The 2 nd level floor joists will need to be shored before the beam is removed. July 16, 2013 M:\Purchasing\BIDS\801 - District Office\ Entry Canopies\ Addendum 002.docx

2 8) Detail 2/A4.1 does not show the L2x2 ledger welded on the back of the fascia plate as shown on detail 2/S0.0. Please confirm that this angle is continuous along the fascia plate except where the vertical L3x3 is. Confirmed 9) Need details showing how the new W8x28 (Alternate #1) connects to the existing structure. Single plate (5/16 ) simple shear tabs with (2) 3/4" diameter bolts at each end. 10) There is not a connection detail called out for the ends of the fascia plate on the north canopy. Are we to use detail 8/S0.0? Yes 11) None of the shear tab plates shown in the connection details are dimensioned or have welding requirements provided. Is the structural engineer going to provide these missing details or do we have to hire a structural engineer to provide these details during the submittal process? These are AISC standard connections the details of which are prescribed in their publications. The steel supplier should represent the standard connection in their shop drawings and we will review the shop drawings to verify that it is correct and adequate for the loading. 12) We came up with a problem on installing the W8x28 and the HSS 12x3 that connects to existing structural behind the brick veneer. We don't see any way to install these in one piece without having to remove a whole lot of brick. At the HSS 12x3 we will need the brick removed on the corner back to the face of the existing column on both ends which is over 5-1/2" behind the face of the brick. This way we can slide the HSS into place between the existing columns and set it on the seat angles. Confirmed 12a) At the Alt. #1, W8x28, from the existing plans it looks like it connects to an existing beam which is 9-1/2" behind the brick on the north end. The existing plans do not show any structural on the south end inside the stair well where it shows to connect the south end. So we're not sure what kind of connection we are doing there. But in order to slide the beam back up under the 2nd floor deck and inside the wall back to the existing structural we are going to need a couple of feet of brick removed around each connection point to angle it in and line it up between the columns. A possible solution to this much demo would be to have the structural engineer design a bolted or welded connection at the mid-point of the beam. That way we can slide each end in separately and then connect at the middle and ends. Either way, we need some details for how we are connecting to the existing before we can accurately bid this. Please refer to item #9 above for connections at each end of the beam. We recommend consulting the steel supplier to estimate the cost of field splicing the beam to develop the maximum capacity of the beam in service to compare with the cost of the masonry work required. Lighting: A. LIGHTING: Please see attached revised lighting plan and fixture specifications July 16, 2013 M:\Purchasing\BIDS\801 - District Office\ Entry Canopies\ Addendum 002.docx

3 B. EXPOSED BRICK after existing canopies are removed: Contractor to provide brick cleaning, tuck-pointing and restore brick to match currently exposed brick. C Specification: a. Exterior 2x2 panels: to be solid (no perforations). Wind load only applies to exterior panels. Provide sheathing below metal joist structure with weather barrier, (details 2&3 Sheet A4.1) and provide manufacture approved panel fastening to meet wind load. b. Interior 2x2 grid: delete weather barrier on interior (detail 3, 4, 5 Sheet A4.1. c. Add Manufacture as Design and Performance Standard in lieu of Armstrong: Chicago Metallic Corporation; Planostile Snap-in Concealed Panel System or equals. All radius cuts to be field cut per manufactures recommendations. D Specification: TPO and EPDM Ballasted roofing is an alternate providing product meets review criteria. E Specification: a. No card reader within this door system b. Add the following to 2.2 manufacturers c. sss 2. Door system will comply with BHMA A156.10, shall be capable of manual operation in event of power failure and shall comply with IBC section Additional manufacturers: 1. Won-Door 2. McKeon Door 3. Cornell Iron Works 4. Horton Automatics F. Drawings: Per 1/A4.1 delete reference to Alcoa Reynobond above doors only. Provide cleaning and tuck-pointing of brick above the existing ceiling where brick is exposed below new ceiling. July 16, 2013 M:\Purchasing\BIDS\801 - District Office\ Entry Canopies\ Addendum 002.docx

4 CATALOG #: LN10RAT-BM-MTG120-30KS-LRNT LNC6*-120V-DIML9 LAMP: 3050 K LED TYPE: B Page 1 of 4 40 ADJUSTABLE 1 7 /8" REGRESS LN10RAT / LN10RAL Covered By US Patent 8,215,805 LUMINAIRE INFORMATION LN10RAT LN10RAL (Trimless) It's a downlight, adjustable and wall wash. The first true LED substitute for the MR-16 point source. Packing punch and sparkle while meeting strict energy criteria. Packing the power of up to 1000 delivered lumens combined with 90+ High CRI and a 10 degree beam with 6500 center Beam Candle Power - All from a tiny 2.5 aperture. NanoLED provides maximum delivered lumens and optical performance through the optimization of thermal, optical and LED science in the smallest possible aperture. USAI has achieved the ultimate performance goal for LED lighting technology - An indistinguishable and first true substitute for the traditional MR-16 point source while consuming significantly less energy. DELIVERED PERFORMANCE 20 Watts 90+ ADJUSTABLE 80+ HIGH CRI CRI Delivered Lumens Source Lumens Center Beam Candle Power (10 ) Delivered Lumens per Watt Source Lumens per Watt Beam Spread Options 10 /25 Aperture Size 2-1/2" Dimming Options 0-10V / ELV / 3-Wire / TRIAC Performance based on 3000K / 80 CRI / PROJECT INFORMATION PROJECT DATE NOTES HOW TO SPECIFY Trim Baffle Options Wattage Color Reflector Trim Finish Housing Voltage Accessories Temperature TYPE (Trim) LN10RAT (Trimless) LN10RAL USAI Lighting BM - Black Matte Baffle WM - White Matte Baffle BV - Black Vertical Groove Baffle WV - White Vertical Groove Baffle MA - Matte Alzak BA - Black Alzak MTG114 - (14W LED) MTG120 - (20W LED) info@usailighting.com Standard CRI KS K-82 CRI 30KS K-82 CRI 35KS K-80 CRI High CRI KH K-90 CRI 30KH K-90 CRI LRNT Distribution LRNT Distribution Accessories (continued) 1126 River Road New Windsor, NY White 13 - Statuary Bronze 21 - Black 28 - Metalized Grey RAL - Special Color T F LNC61 LNC63 LNC65 LIC1 LIC3 LIC5 LCP1 LCP3 LCP5 EML - Emergency lighting battery pack w/ remote test switch. Serviceable through aperture). Not for use with wet listed. Bodine BSL17C-C2 Emergency driver with max. output of 260mA for 90 minutes delivering approx lumens. 120V 277V CB27-27" C-Channel CB52-52" C-Channel DIML2-0-10V Low Voltage 100%-15% Dimming Driver DIML3- Lutron Hi-Lume A-Series 2 wire Foward Phase (with neutral) 100%-1% Dimming Driver. 120V Only DIML4 - Lutron Hi-Lume LED / ECO System Series "A" 3 Wire Control 1% Dimming Driver DIML9-2 wire Foward Phase / TRIAC 100%-15% Dimming Driver DIML10-2 wire Reverse Phase / ELV 100%-15% Dimming Driver BOFD - Borocilate Frosted Lens LSFD - Linear Spread Frosted Lens SOFD - Solite Frosted Lens PRFD - Prismatic Frosted Lens HEXD - 1/8" Hex Cell Louver USAI, LLC. All rights reserved. All designs protected by copyright. Patents Pending. Revised 6/06/2013

5 CATALOG #: LN10RAT-BM-MTG120-30KS-LRNT LNC6*-120V-DIML9 LAMP: 3050 K LED TYPE: B Page 2 of 4 40 ADJUSTABLE 1 7 /8" REGRESS LN10RAT / LN10RAL LIGHT ENGINE Propritary blend of high power white LEDs tightly binned for fixture-to-fixture color consistency ± 50K within a 2-Step MacAdam Ellipse. Field replaceable through the aperture. MATERIALS: Trim: Precision die cast body with durable UV-stabilized powder coating. Housing: Universal housing style allows the ability to swap trim styles between Downlight, Adjustable and Wall Wash. See Plugand-Play limitations on matrix below. Fabricated of 20 ga. black powder coated steel with thru wire J-box, 2 in 2 out at min. 90 C, #12 AWG thru branch circuit wiring. Trim Lens: Solite. Reflector: Interchangeable tool-less reflector system allows for flexibility while maintaining design consistency. Available in 10 and 25 distribution. Baffle Options: High temperature nylon. BM - Black Matte Baffle WM - White Matte Baffle BV - Black Vertical Groove Baffle WV - White Vertical Groove Baffle BA - Black Alzak MA - Matte Alzak ADJUSTMENT: True Hot Aiming with center beam optics is adjustable with 1/8" Allen screw driver. Simple recessed angled screws enable adjustment of vertical aiming and horizontal rotation from below, without trim removal. 362 locking horizontal rotation, with 0-40 locking vertical tilt. HOUSING INFORMATION New Construction LNC61 - DL / ADJ / WW (Max. Ceiling Thickness - 7 /8") LNC63 - DL / ADJ 30 / WW (Max. Ceiling Thickness /4") LNC65 - DL / ADJ 20 (Max. Ceiling Thickness /2") Covered By US Patent 8,215,805 CRI OPTIONS: Standard: 80+ CRI. High: 90+ CRI. COLOR TEMPERATURE Standard CRI 2700K CRI +/- 50K 3050K CRI +/- 50K 3450K CRI +/- 60K High CRI 2700K CRI 3050K CRI RATED LIFE: Based on IESNA LM ,000 hours at 70% lumen maintenance (L70). HEATSINK: Proprietary high performance aluminum die cast heatsink for maximum LED life. DIMMING: (optional) Multiple dimming options available. See compatibility chart attached. DRIVER: Solid state electronic. Constant current. High power factor. Specify 120V or 277V. ACCESSORY HOLDER: 360 rotating, "D" size accessory holder. Maxium 2 lenses. AIMING MEMORY FEATURE: Unique patent-pending vertical and horizontal aiming memory feature allows users to remove trim for reflector or accessory change without disturbing the set and locked lamp position. Trim is also keyed to housing to maintain aiming position. CEILING CUT OUT: 3 1 /2" Ø IC / Airtight LIC1 - DL / ADJ / WW (Max. Ceiling Thickness - 7 /8") LIC3 - DL / ADJ 30 / WW (Max. Ceiling Thickness /4") LIC5 - DL / ADJ 20 (Max. Ceiling Thickness /2") MOUNTING: Butterfly brackets and adjustable nailer bars with integral nails provided. Nailer bars are extendible from 14" to 24" centers. LISTINGS: Dry/Damp. IBEW union made. NOTES: Maximum ceiling thickness up to 1 1 /2" Housing included with trim. Trimless for drywall installation only Trimless not available in acoustical ceilings. Not for use in air handling spaces. Fixture should be installed in applications where ambient temperatures do not exceed 40 C during normal operation. 5 year warranty Interior use only. PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM TRIM Plan View 1 7 /8" Regress Ø Ø CP / Chicago Plenum - CCEA Approved LCP1 - DL / ADJ / WW (Max. Ceiling Thickness - 7 /8") LCP3 - DL / ADJ 30 / WW (Max. Ceiling Thickness /4") LCP5 - DL / ADJ 20 (Max. Ceiling Thickness /2") /4" 7 7 /16" 7 7 /16" 13 1 /4" 12" 12" USAI Lighting 16 3 /8" info@usailighting.com 17 5 /8" 1126 River Road New Windsor, NY T F /8" USAI, LLC. All rights reserved. All designs protected by copyright. Patents Pending. Revised 6/06/2013

6 CATALOG #: LN10RAT-BM-MTG120-30KS-LRNT LNC6*-120V-DIML9 LAMP: 3050 K LED TYPE: B Page 3 of 4 DIMMING DRIVER WIRING SCHEMES: DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML2 & DIML3 DIML2 LED: 0-10V FL Dimming Driver Wiring (Dims down to 15%) NOTE: Consult dimmer manufacturer for detailed installation information. For use with 0-10V fluorescent type controls. Use only with approved vendor models: Lutron: DIVA DVTV-XX XX=Color Leviton: IP710-DLX Lightolier: V2000FAMU 0-10V Dimmer (By Others) 0-10V VIOLET CCT GREY VIOLET GREY DIMMING DRIVER WHITE GROUND BUILDING POWER WIRING NOTE GROUND WIRE RED + - LED Compatible Crestron Dimming System NOTE: Consult dimmer manufacturer for detailed installation information. Creston Min # of Creston Measured Model Compatible Fixtures Min-Max % Light Output Required (1) Limits (2) (3) CLS-EXP-DIMFLV Y % % DIN-4DIMFLV4 Y % % DIN-A08 Y % % GLX-DIMFLV8 Y % % GLXP-DIMFLV8 Y % % (1) Operating dimmers with less than minimum required fixtures may cause flicker. The Max number of fixtures is limited by dimmer rating unless otherwise noted. (2) % Level refers to the Crestron Control System Intensity. Operating the dimmer below the Min % level may cause flicker. Operating the dimmer above the Max % may show no additional brightness. (3) % Level of light output from fixture when connected directly to power source (4) Dimmer requires a direct connection to neutral unless otherwise noted. DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) Compatible Lutron Dimmers / Test Results NOTE: Consult dimmer manufacturer for detailed installation information. Fixtures Measured Product Part Number Per Dimmer Light Output 120V Only* Range NovaT NTLV-600-CPN % - 1% Maestro Wireless MRF2-6ND % - 1% RadioRA W RRD-10ND % - 1% RadioRA 2 Adaptive dimmer RRD-6NA % - 1% RadioRA 600W RA-6ND % - 1% RadioRA 1000W RA-10ND % - 1% HomeWorks QS 600W HQRD-6ND % - 1% HomeWorks QS 1000W HQRD-10ND % - 1% HomeWorks QS Adaptive dimmer HQRD-6NA % - 1% HomeWorks QS WPM HQRJ-WPM-6D (per output) 100% - 1% HomeWorks 600W dimmer HRD-6ND % - 1% HomeWorks 1000W dimmer HWD-10ND, HRD-10ND % - 1% HomeWorks WPM HWI-WPM-6D (per output) 100% - 1% GRAFIK Eye QS QSGR-, QSGRJ (per output) 100% - 1% GRAFIK Eye 3000 GRX-3100, GRX (per output) 100% - 1% RPM-4U Module HW-RPM-4U-120, 1 26 (LCP, HomeWorks, LP-RPM-4U-120 (per output) 100% - 1% GRAFIK Systems, Quantum) RPM-4A Module HW-RPM-4A-120, 1 8 (LCP, HomeWorks, LP-RPM-4A-120 (per output) 100% - 1% GRAFIK Systems, Quantum) GP Panels (LCP, HomeWorks, Various % - 1% GRAFIK Systems, Quantum) Stanza SZ-6ND % - 1% * Fixtures per Dimmer value assumes a 40W fixture. Number of fixtures may be higher if wattage is less than 40W. NOTE: Contact Lutron tech support for deganging rules when using wallbox controls on the Hi-lume A-Series LED Driver. Compatible ETC Dimming Cabinets / Test Results Approved for use with: ETC Sensor + Cabinet with D20 dimming module Measured light output 100% - 1% ETC Unison DRd Cabinet with D20F dimming module NOTE: Additional dim configuration required for optimum performance. Measured light output 100% - 1% Wire Diagram for 2-Wire Control Forward Phase with Neutral 2-Wire Dimmer (By Others) WHITE GREEN SWITCHED HOT V- NEU V+ GND RED LED DRIVER (BACK SIDE OF MTG PLATE) USAI Lighting info@usailighting.com 1126 River Road New Windsor, NY T F USAI, LLC. All rights reserved. All designs protected by copyright. Patents Pending. Revised 6/06/2013

7 CATALOG #: LN10RAT-BM-MTG120-30KS-LRNT LNC6*-120V-DIML9 LAMP: 3050 K LED TYPE: B Page 4 of 4 DIMMING DRIVER WIRING SCHEMES: DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML4 DIML4 LED: Lutron Hi-Lume A-Series LED Driver with Eco System Control / LED Dimming Driver Wiring (Dims down to 1%) Compatible Lutron Dimmers / Test Results NOTE: Consult dimmer manufacturer for detailed installation information. Fixtures Measured Product Part Number Per Dimmer Light Output 120V 277V Range NovaT NTF-10, % - 1% NovaT NTF-103P, NTF % - 1% NovaT NTF-103P % - 1% Nova NF % - 1% Nova NF-103P, NF % - 1% Nova NF-103P % - 1% Vareo VF % - 1% Skylark SF-10P, SF-103P % - 1% Skylark SF-12P-277,SF-12P % - 1% Diva DVF-103, DVSCF-103P % - 1% Diva DVF-103P-277,DVSCF-103P % - 1% Ariadni AYF-103P % - 1% Ariadni AYF-103P % - 1% Vierti VTF-6AM % - 1% Maestro MAF-6AM, MAF-6AM-277, MSCF- 6AM, MCSF-6AM % - 1% Maestro Wireless MRF2-F6AN-DV % - 1% Spacer System SPSF-6A,SPSF-6A-277, SPSF- 6AM, SPSF-6AM % - 1% Lyneo LX LXF-103PL % - 1% Lyneo LX LXF-103PL % - 1% Radio RA 2 RRD-F6AN-DV % - 1% HomeWorks QS HQRD-F6AN-DV % 1% Interfaces (1) PHPM-3F -120, PHPM-3F-DV % - 1% NGRX-FDBI-16A % - 1% Energi Savr Node CS-1L-WM, CS-2L-WM, with EcoSystem CS-1LCM, CS-2L-CM 64 per 100% - 1% Grafik Eye QS QS with EcoSystem EcoSystem 100% - 1% with ECO System 100% - 1% Quantum Quantum 100% - 1% PowerPak dim RMJ-ECO32-DV-B 32 per module 100% - 1% module ECOSystem 100% - 1% Wire Diagram for 3-Wire FL Control (no Eco System Control) FL Control (By Others) PURPLE/GREY PURPLE ECO-SYS BUS CAP WIRES ORANGE WHITE GREEN Wire Diagram for ECO System Digital Control ECO SYSTEM Control (By Others) CAP LEAD PURPLE/GREY PURPLE ECO-SYS BUS ORANGE WHITE GREEN SWITCHED HOT DIMMED HOT V- NEU V+ GND E2 E1 SWITCHED HOT DIMMED HOT V- NEU V+ GND E2 E1 RED RED LED DRIVER (BACK SIDE OF MTG PLATE) LED DRIVER (BACK SIDE OF MTG PLATE) (1) For use with 3 Wire controls or Commercial Systems, RA Systems or Home Systems applications. *Contact Lutron tech support for deganging rules when using wallbox controls on the Hi-lume A-Series LED Driver. **Fixtures per Dimmer value assumes a 40W fixture. Number of fixtures may be higher if wattage is less than 40W. Compatible ETC Dimming Cabinets / Test Results Approved for use with: ETC Sensor+ Cabinet with D20 dimming module Measured light output 100% - 1% ETC Unison DRd Cabinet with D20F dimming module NOTE: Additional dim configuration required for optimum performance. Measured light output 100% - 1% USAI Lighting info@usailighting.com 1126 River Road New Windsor, NY T F USAI, LLC. All rights reserved. All designs protected by copyright. Patents Pending. Revised 6/06/2013

8 CATALOG #: LTR300-WW LAMP: 3500 K LED TYPE: R Page 1 of 1 Project: 12VDC LEDTASK HIGH OUTPUT FLEXIBLE LED LINEAR RIBBON Type: Location: Contact Phone: PRODUCT DESCRIPTION A high lumen output flexible LED linear ribbon that conforms to straight, curved and irregular architectural coves, indoor steps and bannisters, interior recesses, undercabinet and task areas, and other constructs where even, energy saving high lumen output LED illumination is specified. Available in a 5 meter (16.4 ) reel. Ribbon can be cut in field to achieve desired length. PRODUCT SPECIFICATIONS Construction: LEDTask High Output Flexible LED Ribbon incorporates W LED diodes per reel and are mounted to a flexible copper buss. The ribbon is conveniently wound on a 5 meter (16.4 ft ) reel. Each reel is shipped in a moisture proof package and is also supplied with appropriate connectors. Connectors: Five meter reel includes 3 - LTW-24 ribbon to power supply connectors, with 1 - LTW-24 affixed to start of reel. Electrical: 19 LED s per foot. Each LED is.14w. 2.6W per foot. 5 meter reel is 3.5 amps. 50,000 hour LED life. Color Temperature: 2700K or 3500K warm white and 4200K natural white. Kelvin temp. (color) ± 200K. Power Supplies: See chart at right for complete descriptions and catalog numbers. Dimming: Yes with dimmable power supplies (see at right) utilizing low voltage magnetic on/off wall dimmer (GMWD-600M). Cutting and Mounting: Linear ribbon can be cut every three LEDs. Ribbon utilizes 3M double stick tape. Label: ETL. UL File No. E American Lighting Association FLEXIBLE LED RIBBON CONNECTORS and ACCESSORIES Cat. No. LTC-1 LTC-3 LTC-12 LTC-24 LTC-36 LTC-60 LTW-6 LTW-24 LTW-48 LTW-60 GMSB-W GMSB-B Description Flexible Ribbon to Ribbon Connector 3 Flexible Ribbon to Ribbon Connector 12 Flexible Ribbon to Ribbon Connector 24 Flexible Ribbon to Ribbon Connector 36 Flexible Ribbon to Ribbon Connector 60 Flexible Ribbon to Ribbon Connector 6 Flexible Ribbon to Power Supply Connector 24 Flexible Ribbon to Power Supply Connector 48 Flexible Ribbon to Power Supply Connector 60 Flexible Ribbon to Power Supply Connector Splice box - white 2 L x 1 W x 5/8 D Splice box - black 2 L x 1 W x 5/8 D ELECTRONIC POWER SUPPLIES DIMMABLE MAGNETIC POWER SUPPLIES Cat. No. Description LTP-2 LTP-6 LTH-2 LTH-4 LTH-8 LTH-16 LTH-25 2 Amp - Switchable - 120V Cord and Plug. Class II 2 amps. Electronic. 5 Amp - Switchable - 120V Cord and Plug. Class II 5 amps. Electronic. 2.1 Amp - 12V DC - 25W Metal Chassis Hardwire Screw terminals 4.2 Amp - 12V DC - 50W Metal Chassis Hardwire Screw terminals 8.5 Amp - 100W Metal Chassis Hardwire Screw terminals and mounting feet. Electronic Amp - 200W Metal Chassis Hardwire Screw terminals and mounting feet. Electronic. 25 Amp - 320W Metal Chassis Hardwire Screw terminals and mounting feet. Electronic. LTHM50-DIM Dimmable - Primary: 120VAC, 60Hz, 0.33A Secondary: 12VAC, 12VDC, 4A Max. 50W LTH-60-DIM Dimmable - Primary: 120VAC, 60Hz, 0.33A Secondary: 12V AC/DC, 12VDC, 4A Max. 60W LTHM100-DIM LTHM300-DIM LTHM150-CL2 -DIM LTHM300-CL2 -DIM GMWD-600M Dimmable - Input: 120VAC, 60Hz, Output: 12VDC 8A Max. 100W, Nema 3R Enclosure Dimmable - Primary: 120VAC, 60Hz, 25A Output: 12VDC, Double Section Bobbin, Max. 300W Dimmable - Input: 120VAC, 60Hz, 5A, 3 circuit Class II Output: 12VDC, Man. reset, 150W, UL for indoor use. Dimmable - Input: 120VAC, 60Hz, 6 circuit Class II Output: 12VDC x 6, 25A Max. 300W, UL for indoor and outdoor use 600W magnetic wall dimmer with on/off switch. Single pole. 120V/60Hz. White finish. White wall plate included. For use with all GM Lighting 12VDC and 24VDC Mag. Dimmable Power Supplies For power supply dimensions, please see Catalog No. Color* Total LEDs LED Watts Amps per Reel Lumens per Ft. Ribbon Length LED Life LTR K W meters 50,000 hrs. Warm White 19 per ft. 2.6W per ft ft. LTR300-WW 3500K W meters 50,000 hrs. Warm White 19 per ft. 2.6W per ft ft. LTR K W meters 50,000 hrs. Natural White 19 per ft. 2.6W per ft ft. *Kelvin temperature (color) ±200 GM Lighting, LLC 9830 W. 190th St. Unit F Mokena, IL Toll-Free: (866) FAX: (708) gmlightingllc@sbcglobal.net Specifications subject to change without notice _ledtaskhighoutput

9