HERBICIDE MAPP A

Transcription

1 H HERBICIDE MAPP A soluble concentrate formulation containing 267 g/l clopyralid (present as 352 g/l clopyralid-olamine) and 67 g/l picloram (present as 84 g/l picloram-olamine). CLOPIC is a post-emergence herbicide for use on winter oilseed rape for the control of mayweeds and cleavers. May cause long lasting harmful effects to aquatic life. Dispose of contents/container to a licensed hazardous-waste disposal contractor or collection site except for empty clean containers which can be disposed of as non-hazardous waste. To avoid risks to human health and the environment, comply with the instructions for use. CLO/GB/1L/F/0116/UPL January 2016 A1.1 CLOPIC UK NoA Litre 267 g/l CLOPYRALID 67 g/l PICLORAM

2 IMPORTANT INFORMATION FOR PROFESSIONAL USE ONLY AS AN AGRICULTURAL HERBICIDE Crop Oilseed rape (winter) Maximum individual dose (L product/ha) Maximum total dose (L product/ ha/crop) Latest time of application Before flower buds are visible above the canopy READ THE LABEL BEFORE USE. USING THIS PRODUCT IN A MANNER THAT IS INCONSISTENT WITH THE LABEL MAY BE AN OFFENCE. FOLLOW THE CODE OF PRACTICE FOR USING PLANT PROTECTION PRODUCTS. SAFETY PRECAUTIONS Operator protection WHEN USING DO NOT EAT, DRINK OR SMOKE. Environmental Protection Do not contaminate water with the product or its container. Do not clean application equipment near surface water. Avoid contamination via drains from farmyards and roads. Storage and disposal KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDING STUFFS. KEEP OUT OF REACH OF CHILDREN. KEEP IN ORIGINAL CONTAINER tightly closed in a safe place. DIRECTIONS FOR USE IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be carefully read in order to obtain safe and successful use of this product. Restrictions Do not roll or harrow 7 days prior to or following treatment. Do not apply to crops that are under stress from pest damage, drought, cold, nutrient deficiency or other cause. Take extreme care to avoid drift onto crops and non-target plants outside the target area. Plant material that has been treated with CLOPIC must not be used for composting or mulching. Manure from animals fed CLOPIC treated crops, must also not be used for composting.

3 As soon as possible after harvest of the treated crop, all treated plant remains should be chopped and incorporated into the soil, to release any residues into the soil where they are more rapidly broken down. Subsequent crops that are susceptible to CLOPIC may be affected by residues remaining in plant tissues. Before planting susceptible crops ensure that remains of the preceding treated crop are completely broken down. Where the treated crop remains have not completely broken down by the time the following crop is to be planted, planting of susceptible crops should be avoided. Susceptible crops are legumes including peas and beans, umbelliferae including carrot; potatoes; compositae including lettuce; glasshouse and protected crops. Contract agents should be consulted before using on crops grown for seed. CROP SPECIFIC INFORMATION Weed Control CLOPIC is a soluble concentrate formulation containing 267 g/l clopyralid and 67 g/l picloram. It is a post-emergence herbicide for use on all varieties of winter oilseed rape for the control of mayweeds and cleavers. Absorption of CLOPIC occurs mainly through the foliage of weeds, with translocation to other parts of the plant. For best results apply to small and actively growing weeds. Mayweed (scented and scentless) - susceptible up to a growth stage of 150 mm across/high. Cleavers - moderately susceptible up to a growth stage of 150 mm across/high (NB control will not be effective on cleavers germinating after application). Good spray coverage is necessary to obtain maximum level of weed control. Care should be taken to avoid drift to non-target plants or other crops. Crops and timings of application CLOPIC can be used on all varieties of winter oilseed rape for the control of mayweeds and cleavers and is suitable for all soil types. CLOPIC can be applied in the spring from BBCH GS20 up until before flower buds are visible above the crop canopy. One application of CLOPIC at a rate of L/ha should be applied to small and actively growing weeds.

4 Following crops Following application of CLOPIC the following restrictions on planting following crops must be observed: Wheat, barley, oats, maize, oilseed rape: 4 months (120 days). All other crops: 36 months (3 years). If, following a spring treatment of CLOPIC, crop failure occurs, only the following crops may be planted: Spring oilseed rape, spring wheat, spring barley, spring oats, maize or ryegrass (provided ploughing or thorough cultivation is undertaken prior to replanting). MIXING AND SPRAYING Rates of use and water volume Apply litre of CLOPIC in 200 litres water per hectare. Application Apply as a MEDIUM quality spray (see BCPC guidelines). Do not apply through CDA applicators. Half fill the spray tank with the required volume of clean water and start agitation. Shake the container of CLOPIC well and add the required amount to the spray tank, continuing agitation whilst adding the remainder of the water. Rinse any empty containers thoroughly and add rinsing to the spray tank. Ensure the mixture is thoroughly mixed before use and continue agitation until spraying is completed. TANK CLEANING Thoroughly wash all spraying and measuring equipment with water immediately after use. To avoid subsequent injury to crops, all spraying equipment must be thoroughly cleaned both inside and out after an application of CLOPIC. 1. Immediately after spraying, drain tank completely. Any contamination on the outside of the spraying equipment should be removed by washing with clean water. 2. Rinse inside of tank with clean water and flush through booms and hoses using at least one tenth of the spray tank volume. Drain tank completely. 3. Half fill tank with clean water. Agitate and then briefly flush the boom and hoses. Top up with water making sure the tank is completely full and allow to stand for 15 minutes with agitation. Flush the boom and hoses and drain tank completely.

5 4. Nozzles and filters should be cleaned separately and removed if necessary. 5. For disposal of washings, follow local regulations. Do not spray onto sensitive crop or land intended for cropping with sensitive crop. Note: If it is not possible to drain the tank completely, step 3 must be repeated before going onto step 4. CONDITIONS OF SUPPLY All goods supplied by us are of high grade and we believe them to be suitable but, as we cannot exercise control over their storage, handling, mixing or use, or the weather conditions before, during and after application which may affect the performance of the goods, all conditions and warranties, statutory or otherwise, as to the quality or fitness for any purpose of our goods are excluded, and no responsibility will be accepted by us or re-sellers for any failure in performance, damage or injury whatsoever arising from their storage, handling, application or use. Our staff or agents cannot vary these conditions whether or not they supervise or assist in the use of such goods. CLOPIC is a registered trademark of UPL Europe Ltd. Other brand names used in this guide are trademarks of other manufacturers for which propriety rights may exist. To access the Safety Data Sheet for CLOPIC please use the link below or scan the code. Alternatively, contact your local supplier.

6 CLOPIC MAPP A soluble concentrate formulation containing 267 g/l clopyralid (present as 352 g/l clopyralid-olamine) and 67 g/l picloram (present as 84 g/l picloram-olamine). CLOPIC is a post-emergence herbicide for use on winter oilseed rape for the control of mayweeds and cleavers. IMPORTANT INFORMATION FOR PROFESSIONAL USE ONLY AS AN AGRICULTURAL HERBICIDE Crop Oilseed rape (winter) Maximum individual dose (L product/ha) Maximum total dose (L product/ ha/crop) Latest time of application Before flower buds are visible above the canopy READ THE LABEL BEFORE USE. USING THIS PRODUCT IN A MANNER THAT IS INCONSISTENT WITH THE LABEL MAY BE AN OFFENCE. FOLLOW THE CODE OF PRACTICE FOR USING PLANT PROTECTION PRODUCTS. SAFETY PRECAUTIONS Operator protection WHEN USING DO NOT EAT, DRINK OR SMOKE. Environmental Protection Do not contaminate water with the product or its container. Do not clean application equipment near surface water. Avoid contamination via drains from farmyards and roads. Storage and disposal KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDING STUFFS. KEEP OUT OF REACH OF CHILDREN. KEEP IN ORIGINAL CONTAINER tightly closed in a safe place. PROTECT FROM FROST SHAKE WELL BEFORE USE Batch No.: UPL Europe Ltd. The Centre, Birchwood Park, Warrington, WA3 6YN Telephone: Fax: For 24 hour emergency information contact: CARECHEM24 : +44 (0) The (COSHH) Control of Substances Hazardous to Health Regulations may apply to the use of this product at work.