OWNER S MANUAL MHSCB1-01

Transcription

1 OWNER S MANUAL MHSCB1-01 Cube Speaker System MHSFL1-01 In-Wall Speaker System MHSZ21-01 Zone 2 Kit CineMagic Built-In Home Theater System

2 AMPLIFIERS MHSAMP-06-WALL MHSAMP-06-CUBE MHSAMP Channel Integrated Amplifier 5.1 Channel Integrated Amplifier Zone 2 Amplifier General Information Models MHSAMP-06-WALL and MHSAMP-06-CUBE are identical except for the equalization circuitry within the amplifier. This operating manual pertains to both amplifiers and they are referred to as Amplifier in this operating manual. This manual also covers MHSAMP-01, referred to as Zone 2 Amplifier in this manual. The Amplifier is designed to enhance audio performance from audio / video components without requiring significant manual adjustments. The Amplifier utilizes QSound Lab s sound processor, QSurround TM, to create dynamic surround sound from any stereo matrix encoded signal. The Amplifier incorporates internal switching mechanisms and sensors to automatically distribute sound to and from the appropriate location and source. Music can be distributed from the Amplifier to additional rooms through a connection to an optional Zone 2 Amplifier. The Zone 2 Amplifier can be connected to an additional Zone 2 Amplifier to distribute music to several additional rooms. The Amplifier includes equalization circuitry that is designed to optimize the output for specific speakers utilized in the system. Speakers MHSAMP-06-WALL 2 6 ½ Wall Speaker (SPW65M-01) 3 4 X 6 Speaker (SP4X6M-01) 2 6 X 9 Speaker (SP6X9M-01) MHSAMP-06-CUBE 5 Cube Speaker (SPCBMH-01) 2 6 X 9 Speaker (SP6X9M-01) The performance of the amplifier may vary if alternative speakers are utilized in the system. Features The Amplifier has the following main features: Seven speaker output, including dual subwoofer output. Defined equalization circuitry to optimize speaker output. QSurround TM processor provides 5.1 channel surround sound from stereo and stereo matrix encoded signals. Multi-source / Multi-room capability allows two sources to play simultaneously in two different rooms. Automatic switching circuitry eliminates manual adjustments. Line level or speaker level input for stereo source Line level input for television audio output connection. Surround and subwoofer speaker volume adjustments provide optimal acoustics relative to listening area. Auto power on / off. The Zone 2 Amplifier has the following main features: Amplified stereo sound from stereo input connected to Amplifier. Line level input for connection to Amplifier. Line level input for television audio output connection. Line level output for connection to an additional Zone 2 Amplifier. Auto power on / off.

3 Operating Instructions Before operating system, please read this manual thoroughly and retain for future reference. Parts Description Amplifier 1 AC power plug 2 Power indicator light 3 Seven speaker connection output 4 Zone 2 amplifier connection output 5 Speaker level input for audio component 6 Line level RCA input for audio component 7 Line level RCA input for television 8 Surround speakers volume adjustment 9 Subwoofer volume adjustment Zone 2 Amplifier 1 AC power plug 2 Line level RCA input for television 3 Main Amplifier input connection 4 Additional Zone 2 amplifier output 5 Speaker output to volume control Connections Amplifier The Amplifier provides connections to audio / video components as illustrated below. The rear panel of the audio / video component connected to the Amplifier requires an audio out feature (speaker or line level). This audio signal must have variable output, this feature is usually found within the televisions audio menu. If the system is connected to a fixed output signal, the volume +/- cannot be controlled by the television. Hookups Television Stereo (speaker level) Stereo (line level) Note: The Amplifier provides two types of connections from a stereo source: speaker level or line level. Only one of the two connections will be played through the Amplifier. The most common connection from a stereo source is speaker level. See diagrams above for connections.

4 Audio Component CD Player Connection Component may be connected through certain stereo components or directly through the television. If connection is made through the television, the audio out from the CD player should be connected to the audio in of a video input on the television. Set television to video input and control volume through the television (television screen will be blank when operating under this connection). See illustration below: Video Component Audio outputs from video components should be connected through the television. The audio signal is passed through the television to the Amplifier. See illustration below: Zone 2 Amplifier Hookups Audio Component The Zone 2 Amplifier connects directly to the Amplifier and will play music from the audio component connected to the Amplifier. See illustration below: Video Component A television can be connected to the Zone 2 Amplifier through an audio cable. See illustration below: Customizing Sound Fields

5 If you feel the volume of the surround or subwoofer speakers are inadequate, perform the following: Located on the top panel of the Amplifier are volume adjustments for the surround and subwoofer speakers. Use a flat head screwdriver to adjust until the appropriate sound level is determined. Note: optimal position varies based on proximity of listening area relative to speakers. As all audio / video components have different audio output signals, a volume adjustment may be required: The Amplifier may have a volume adjustment for the television on the top panel or may be supplied with a separate in-line volume control (part # MHSLLA-01). The in-line volume control connects to the television input of the Amplifier. To set the television volume adjustment, perform the following: With the television connected to the Amplifier, set television volume to the middle of the volume bar. Using a flat head screwdriver, turn the volume adjustment on the Amplifier or in-line volume control until the desired listening volume is obtained. Operating Situations / Tips Television and Stereo on at same time: Television has priority and will play through speakers in main listening area. Once television is turned off, there is a 15 second delay before stereo plays in the main listening area. In multi-room system, stereo will play in additional zones simultaneous to television in the main listening area. Mute Television: Allows you to listen to stereo source while watching television. If television is muted, stereo will play after a 15 second delay. Volume Control: Main listening area volume is controlled through audio / video component connected to the Amplifier.

6 Additional Rooms: The signal from the audio component connected to the Amplifier will pass though to a Zone 2 Amplifier connected to the Amplifier. Volume in the additional room can be controlled through an in-wall volume control located in the additional room. A television signal connected to the Zone 2 Amplifier will override the signal received from the Amplifier. Once the television signal is terminated, the audio signal from the Amplifier will play after a 15 second delay.

7 Specifications Amplifiers MHSAMP-06-WALL MHSAMP-06-CUBE MHSAMP-01 Output Power 15 W x 7 15 W x 7 5 W x 2 Load 8 ohm 8 ohm 8 ohm THD 0.1% 0.1% 0.1% Frequency Response Front, Center, Surround Front, Center Surround Stereo khz khz khz Subwoofer Subwoofer Hz Hz Input Sensitivity Speaker / Auxiliary Speaker / Auxiliary Speaker 0.75 V 0.75 V 0.25 V Television Television Television 0.75 V 0.75 V 0.25 V Input Impedance Speaker 47 ohm Speaker 47 ohm Line level 45 kohm Auxiliary 45 kohm Auxiliary 45 kohm Television 45 kohm Television 45 kohm Television 45 kohm S/N 70 db 70 db 70 db Power Requirement 120V AC, 60Hz 120V AC, 60Hz 120V AC, 60Hz Power Consumption 95 Watts 95 Watts 19 Watts Dimensions (WHD) 12 x 2 ½ x 11 ¼ 12 x 2 ½ x 11 ¼ 4 ½ x 2 ¾ x 6 ½ Weight 5.3 Kg 5.3 Kg 1.2 Kg Speakers SPW65M-01 SPC65M-01 SP4X6M-01 SP6X9M-01 SPCBMH-01 Driver 6 ½ woofer 6 ½ woofer 4 x6 full range 6 x9 subwoofer 2 ¼ mid-tweeter ¾ polycarbonate ¾ polycarbonate tweeter tweeter Input Power (RMS) Nominal 50 watts 50 watts 50 watts 60 watts 50 watts Maximum 80 watts 80 watts 70 watts 110 watts 100 watts Impedance 8 ohm 8 ohm 8 ohm 8 ohm 8 ohm Sensitivity (1W/1M) 89 db 89 db 89 db 89 db 89 db Frequency Response 60Hz-20kHz 60Hz-20kHz 125Hz-20kHz 45Hz-2.5kHz 250Hz-20kHz Weight 3.5 lbs 2.6 lbs 2.2 lbs 3.7 lbs 1.4 lbs

8 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: CAUTION Increase separation between the equipment and amplifier. Connect the equipment into an outlet on a circuit different from that to which the amplifier is connected. Consult the dealer or and experienced radio / television technician for help. You are cautioned that any change or modification not expressly approved in this manual could void your authority to operate this equipment. PRECAUTIONS On Safety Should any solid object or liquid fall into the cabinet, unplug the amplifier and have it checked by qualified personnel before operating it any further. On Power Source Before operating the amplifier, check that the operating voltage is identical with your local power supply. The amplifier is not disconnected from the AC power source (MAINS) as long as it is connected to the wall outlet, even if the amplifier is turned off. One blade on the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. Should the AC power cord need to be changed, have it done at a qualified service shop only. On Placement Amplifier must be mounted so that the heat sinks are in a vertical position. Do not place the amplifier near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.

9 River Park, Inc. 5.1 Channel Integrated Amplifier Zone 2 Amplifier Speakers LIMITED WARRANTY River Park, Inc. warrants this Product (including accessories) against defects in material or workmanship for a period of one (1) year from the date of purchase. To obtain warranty service, you must ship the Product freight prepaid, in packaging affording an equal degree of protection, to River Park, Inc. This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of the Product. This Warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than a facility authorized by River Park, Inc. to service this Product. For your convenience, River Park, Inc. has established a telephone number for frequently asked questions: River Park, Inc or write to: River Park, Inc. Technical Support Protecta Drive Elkhart, Indiana 46516

10 Installation Amplifier The heat sinks on the Amplifier must be mounted in a vertical position to allow for proper ventilation. Zone 2 Amplifier Speakers 6 ½ Ceiling 1. Cut out hole size 7 ¾ Diameter. A perforated template is part of the speaker packaging 2. Connect speaker wire to speaker. 3. Place speaker into hole cut out. 4. Screw down until mounting clamps tighten to wall board. 5. Place adhesive in speaker bevel. 6. Fasten grill. 4 X6 Center / Surround, 6 X9 Woofer, and 6 ½ In-Wall Cube 1. Cut out hole size (HW): 5 3/8 X 7 3/8 (4 X 6 speaker) 10 9/16 X 7 5/8 (6 X 9 speaker) 10 7/8 X 7 3/8 (6 ½ speaker) A perforated template is part of the speaker packaging 2. Connect speaker wire to speaker. 3. Place speaker into hole cut out. 4. Screw down until mounting bracket tightens to wall board. 5. Place adhesive in speaker bevel 6. Fasten grill. 1. Connect speaker wire. 2. Screw mounting bracket to wall board.

11 Placement of Speakers In-Wall Speaker Placement Cube Speaker Placement IN-WALL SYSTEM Center Speaker (4 x 6 Center) 1. Center the speaker as close as possible to the top of the television monitor. The speaker is magnetically shielded to prevent interference with the television monitor. Front Left and Right (6 ½ In-Wall) 2. The left and right speaker should be placed an equal distance from the center of the television monitor. The speakers should be a least 6 feet, or as much as 15 feet apart from each other. A reference is to place the speakers so that they form a 45 degree angle to the listening area. 3. The speakers should be in line with the television monitor or just above the television monitor.

12 4. The speaker is not magnetically shielded and needs to be at least two feet away from the television monitor. Surrounds (4 x 6 Surrounds or 6 ½ Ceiling) Wall Application 1. Placement on the wall directly behind the listening area or on the walls to the side of the listening area. For best results, place speakers on rear walls. 2. Placement should be approximately 2 to 3 feet above the listening area. Subwoofer Ceiling Application 1. Placement should be just beyond the listening area. 2. For best results, place speakers close to intersecting walls corner or wall and floor. 3. The speaker is not magnetically shielded and needs to be a least two feet away from the television monitor. 4. We recommend placing speakers at same end of room as the television monitor. An alternative method is to place speakers at opposite ends of the room. CUBE SYSTEM The cube speakers are identical and are used as the Center, Front Left and Right, Surround Left and Right. Follow same placement recommendations for In-Wall speakers. The Subwoofer placement is identical to the In-Wall speakers.