Makatec. Spiral Heat Exchanger. for Heating and Cooling
|
|
- Clarissa Watkins
- 5 years ago
- Views:
Transcription
1 Makatec Spiral Heat Exchanger for Heating and Cooling
2 Outline Introduction of the Makatec GmbH and Makatec Apparate GmbH Technologies Heat Exchanger (HEX) Applications of the HEX Role in the Project WP 3 - Heat Exchangers made of Plastic Materials WP 5 - Putting into Practice Summary 2
3 Makatec GmbH + Makatec Apparate GmbH are two companies with their registered office in Bondorf. Bondorf is a village in Baden-Württemberg, about 45 kilometres south-west of Stuttgart Makatec GmbH was founded in the year 2005 in the year 2008 Makatec Apparate GmbH was founded as subsidiary for the commercialisation of the Makatec HEX technology Makatec Apparate GmbH received exclusive licenses for the production of the protected Makatec HEX foreign distributors for Italy, Spain, Ireland are working with Makatec Apparate GmbH, negotiations with further partners in Turkey and France will be finished soon 3
4 Makatec Technologies Makatec develops new technologies and produces apparatus to improve heat and mass transfer: Heat exchanger based on polymer material (HEX) no corrosion Membrane contactor with integrated heat exchanger (MECO) " improved heat and mass transfer Absorption technology for heating and cooling compact design using Makatec HEX and MECO especially for small units below 10 kw heat input International patents have been granted for these technologies. 4
5 Makatec Heat Exchanger The first Makatec product is the Makatec heat exchanger low cost (polymers) no corrosion compact and low weight Main applications are aggressive anorganic liquids sea water well and hot spring water Makatec heat exchanger 5
6 Spiral HEX Basic Design pressure resistant design counter current flow outlet film for fluid separation spacer guarantee turbulent flow only polymer materials easy adaptable to specific boundary conditions inlet housing 6
7 HEX Application Today The combination of a Makatec polymer HEX and a standard heat pump enables the so far unexplored energetic use of sea water as a source of heat. 7
8 HEX Possible Future Applications cooling of acids and caustic solutions oil cooler in cars sea water desalination industrial waste water treatment 8
9 Role in the Project main partner of the UPB supply know-how on plastic wound heat exchanger to partner UPB validate the theoretical results of UPB 9
10 WP 3 - Heat Exchangers made of Plastic Material Proposing new materials of improved economic and environmental performance as heat transfer media to analyse configurations for plastic heat exchanger units to develop and validate accurate CFD models for the detailed description of the flow field and heat transfer in complex-geometry heat exchangers to improve the heat exchanger performance by adjusting both operating conditions and equipment geometry 10
11 WP 3 - Heat Exchangers made of Plastic Material 3.1 Basic design parameters for a spiral wound plastic heat exchanger basic data are prepared by Makatec and delivered to the UPB 3.2 Modelling of complex flows within a spiral wound heat exchanger Makatec will provide experimental data from the plastic heat exchanger units for validation against the advanced 3D CFD models developed by UPB 11
12 WP 3 - Heat Exchangers made of Plastic Material 3.3 Optimisation of the heat exchanger geometry and operating conditions improvement of the heat exchanger performance by adjusting both equipment geometry and operating conditions examination of the effect of the apparatus geometry on the pressure drop and heat recovery. Improvements will be suggested optimal operating conditions in terms of higher flow throughput, lower need on cooling/heating medium and higher heat transfer rates will be investigated by UPB and Makatec 3.4 Experimental validation of the improved geometry based on the theoretical results of UPB, Makatec will develop a optimised prototyp and compare it experimentally with today s Makatec standard type 12
13 WP 5 - Putting into Practice Demonstration of applicability and economic-environmental benefit of novel heat-transfer enhancement techniques and the new design methods proposed implementation of the technologies and design tools developed in the WPs 1-4 at industrial-scale production site in the process industries enabling the real-life validation and demonstration of the findings, know-how and inventions realistic quantification of techno-enviro-economic benefits, compared to conventional heat exchangers gaining valuable feedback for enhancing practicality of technologies developed from the projects 13
14 WP 5 - Putting into Practice 5.1 Demonstration and application of spiral plastic heat exchanger polymer materials have to be identified for an application of the new heat exchanger design for cooling of strong acids like sulphuric or hydrochloric acid if possible, a demonstration in the temperatur range above 100 C will be erected, leading to the requirement of advanced polymer materials with higher temperature resistance compared to Polyolefins 14
15 Summary main partner of the UPB know-how in constructing of HEX delivering basic data for a spiral wound plastic heat exchanger to the UPB developing a optimised HEX based on theoretical results of the UPB validating against the advanced 3D CFD models of the UPB with experimental data new polymer materials have to be identified for an application in strong acids 15
Optimized fan system design for the one-year cycle of a Heat Pump. Ziehl-Abegg SE Frieder Lörcher
Optimized fan system design for the one-year cycle of a Heat Pump Ziehl-Abegg SE Frieder Lörcher Outline Targets for the energetical optimization of fan unit Numerical optimization procedure Results with
More informationHeat exchangers in Thermo Plate-design Type XPT. + variable + cleanable + efficient + safe FULLY WELDED
Heat exchangers in Thermo Plate-design Type XPT + variable + cleanable + efficient + safe FULLY WELDED The XPT for use in a wide range of applications + The pillow-shaped design of the Thermoplates permits
More informationSpiral heat exchangers
Spiral heat exchangers www.tranter.com, www.spiralheatexchangers.com Tranter HES GmbH Tranter HES originated from the acquisition of HES GmbH Heat Exchanger Systems GmbH early 2009. Tranter HES represents
More informationVertical Centrifugal Coater VCC
DIOSNA Processing plants for laboratory and production Vertical Centrifugal Coater VCC Film Coating of Tablets. Efficient, Accurate, Fast. VCC. The Future of Coating DIOSNA Vertical Centrifugal Coater
More informationExperimental Investigation of a Multi Effect Membrane Based Regenerator for High Concentration Aqueous LiCL Solution as Desiccant
Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT 16) Prague, Czech Republic April 4 5, 216 Paper No. ENFHT 111 DOI: 1.11159/enfht16.111 Experimental Investigation of a Multi
More informationPOLYMER HOLLOW FIBRE HEAT EXCHANGERS
POLYMER HOLLOW FIBRE HEAT EXCHANGERS Current developments and applications under an INNOVATE project David Reay, David Reay & Associates (with thanks to the INNOVATE project partners) Polymer Hollow Fibre
More informationAdvanced heat transfer technology. Thermo plate products for the process industry. Substantial energy savings through customized designs
www.athco-engineering.dk Thermo plate products for the process industry Substantial energy savings through customized designs Unique transfer characteristics Advanced heat transfer technology ATHCO-Engineering
More informationAdvanced heat transfer technology
Advanced heat transfer technology Providing substantial energy savings through customized designs Thermo plate products for the process industry Thermo plate products for the process industry Unique transfer
More informationAGRICULTURE AND FORESTRY CONSTRUCTION AND MINING AUTOMOTIVE, COMMERCIAL VEHICLES AND RAILWAYS INDUSTRIAL EQUIPMENT
RAAL is a manufacturer of complete cooling systems and heat exchangers, made of aluminium alloys and stainless steel, in brazed construction: radiators, oil coolers, air coolers, condensers and combined
More informationPerformance Evaluation and Design Optimization of Refrigerated Display Cabinets Through Fluid Dynamic Analysis
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 2008 Performance Evaluation and Design Optimization of Refrigerated Display
More informationBasic Input Data Needed to Develop a High Performance Fan/Blower with Low Noise, Energy Saving and High Efficiency
Basic Input Data Needed to Develop a High Performance Fan/Blower with Low Noise, Energy Saving and High Efficiency Haiye Lou TurboMoni Applied Dynamics Lab Abstract It is often happened, when a project
More informationAvailable online at ScienceDirect. Energy Procedia 91 (2016 ) 35 41
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 91 (216 ) 35 41 SHC 215, International Conference on Solar Heating and Cooling for Buildings and Industry Butane heat pipes for stagnation
More informationSIGMAWIG ALL WELDED PLATE HEAT EXCHANGERS
SIGMAWIG ALL WELDED PLATE HEAT EXCHANGERS 313 SIGMAWIG opens up new fields of application SIGMA plate heat exchangers are recognized worldwide for quality and reliability in thermal processes such as cooling,
More informationTheoretical Performance Analysis of a Liquid Desiccant Air- Conditioning System for Air Heating and Cooling
Proc. 2nd International Confirence Solar Air-Conditioning, Tarragona (ES), 18.-19.10.07, CD Theoretical Performance Analysis of a Liquid Desiccant Air- Conditioning System for Air Heating and Cooling R.
More informationcooling tailor made Customized OEM cooling units Product range the smart way of cooling!
S W I S S M A D E cooling tailor made Customized OEM cooling units Product range www.efcooling.com S W I S S M A D E WK water-cooling equipment «There is no dispute nowadays regarding the importance of
More informationVisualization of Evaporatively Cooled Heat Exchanger Wetted Fin Area
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 2014 Visualization of Evaporatively Cooled Heat Exchanger Wetted Fin Area Sahil
More informationCOMPRESSORS AIR DRYERS AND CHILLERS POWER GENERATION ENGINES HYDRAULIC EQUIPMENT HVAC-R COMPONENTS INDUSTRIAL APPLICATIONS. Stationary compressors
INDUSTRIAL APPLICATIONS COMPRESSORS Stationary compressors Starting from a simple cooler to a complete cooling system, RAAL always offers the best solution in terms of performance, profitability and compliance
More informationINFO. Compact DUAL. GADC Air Cooler for HFC and CO 2. Dual discharge air cooler with and without integrated condensation water pump.
INFO DUAL Compact GADC Air Cooler for HFC and CO 2 Dual discharge air cooler with and without integrated condensation water pump 2 25 kw As you see, you see nothing Where has the condensation water drain
More informationNOVEL COMPACT SORPTION GENERATORS FOR HEAT PUMP APPLICATIONS
- 1 - NOVEL COMPACT SORPTION GENERATORS FOR HEAT PUMP APPLICATIONS S.J. Metcalf, Z. Tamainot-Telto (1) and R.E. Critoph School of Engineering, University of Warwick, Coventry CV4 7AL, UK Abstract: A new
More informationModeling of a regenerative indirect evaporative cooler for a desiccant cooling system
Downloaded from orbit.dtu.dk on: Jun 29, 2018 Modeling of a regenerative indirect evaporative cooler for a desiccant cooling system Bellemo, Lorenzo; Elmegaard, Brian; Reinholdt, Lars O. ; Kærn, Martin
More information2.2. General view of Microchannel Heat Exchangers
2.2. General view of Microchannel Heat Exchangers In recent years, a very important contribution on increasing the performance of the heat exchangers has taken place, sometimes to levels once inconceivable,
More informationExperimental Investigation of a Brazed Chevron Type Plate Heat Exchanger
IJSTE - International Journal of Science Technology & Engineering Volume 1 Issue 12 June 2015 ISSN (online): 2349-784X Experimental Investigation of a Brazed Chevron Type Plate Heat Exchanger N. Manigandan
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 1.0 STUDY OF AEROACOUSTIC PHENOMENONS AT DUCTED COOLING
More informationSIGMAWIG ALL WELDED PLATE HEAT EXCHANGERS. 313e
SIGMAWIG ALL WELDED PLATE HEAT EXCHANGERS 313e SIGMAWIG - opens up new fields of application SIGMA plate heat exchangers are recognized worldwide for quality and reliability in thermal processes such as
More informationCHAPTER 7 COMPARISON OF HEAT EXCHANGERS
168 CHAPTER 7 COMPARISON OF HEAT EXCHANGERS Heat exchangers may be classified according to their flow arrangement. In parallel flow heat exchangers, the two fluids enter the exchanger at the same end,
More informationTop performance when the going gets tough
Top performance when the going gets tough The Alfa Laval DuroShell plate-and-shell heat exchanger Sub-headline coming soon DuroShell plate-and-shell made tougher Alfa Laval DuroShell is a specially engineered
More informationHealthy Buildings 2017 Europe July 2-5, 2017, Lublin, Poland. Experimental study of a novel dew point indirect evaporative cooler
Healthy Buildings 2017 Europe July 2-5, 2017, Lublin, Poland Paper ID 0232 ISBN: 978-83-7947-232-1 Experimental study of a novel dew point indirect evaporative cooler Wenhua Chen, Zhiwei Zhang, Jiayu Li,
More informationConductive Heating Technologies for Medical Diagnostic Equipment. Russell Strehlow, Manager of Research and Development, Minco
Conductive Heating Technologies for Medical Diagnostic Equipment Russell Strehlow, Manager of Research and Development, Minco Table of Contents Abstract.............................................................................
More informationER N ITIO D N O C STARCH CONDITIONING
CONDITIONER STARCH CONDITIONING STARCH CONDITIONING STARCH CONDITIONING The NID starch conditioning system uniquely combines a fluidising bed Vortex Dryer for starch moisture removal, and a Screw Conveyor
More informationCompression of Fins pipe and simple Heat pipe Using CFD
Compression of Fins pipe and simple Heat pipe Using CFD 1. Prof.Bhoodev Mudgal 2. Prof. Gaurav Bhadoriya (e-mail-devmudgal.mudgal@gmail.com) ABSTRACT The aim of this paper is to identify the advantages
More informationRAAL manufactures heat exchangers in brazed plates constructive solution for: automobiles, motorcycles, ATV s, water scooters, aircrafts, etc.
RAAL manufactures heat exchangers in brazed plates constructive solution for: automobiles, motorcycles, ATV s, water scooters, aircrafts, etc. RAAL manufactures HEAT SINKS, COLD PLATES, BATTERY COOLERS
More informationExperimental Study on Compact Heat Pump System for Clothes Drying Using CO 2 as a Refrigerant. Abstract
Experimental Study on Compact Heat Pump System for Clothes Drying Using CO 2 as a Refrigerant M. Honma, T. Tamura, Y. Yakumaru and F. Nishiwaki Matsushita Electric Industrial Co., Ltd. Living Environment
More informationSecure hydraulic system performance. Smart solutions for cooling and cleaning hydraulic oil
Secure hydraulic system performance Smart solutions for cooling and cleaning hydraulic oil The products and the global support you need How can you ensure that your hydraulic systems achieve their full
More informationStudy of Hot-air Recirculation around Off-road Tier-4 Diesel Engine Unit Using CFD Abbreviations Keywords Abstract Introduction and Background
Study of Hot-air Recirculation around Off-road Tier-4 Diesel Engine Unit Using CFD Siddharth Jain, Yogesh Deshpande, Atul Bokane, Arun Kumar Santharam, and Deepak Babar, Halliburton Abbreviations: Computational
More informationa Heat Exchanger using FEA Tool
A Review on Optimal Design of Single Tube in a Heat Exchanger using FEA Tool Roshan V. Marode Abstract:- The performance of heat exchangers can be improved to perform a certain heat-transfer duty by heat
More informationPLATE HEAT EXCHANGERS BETTER BY DESIGN
PLATE HEAT EXCHANGERS BETTER BY DESIGN Construction that s better by design. Polaris quality demands careful attention to the materials and craftsmanship in every heat exchanger we make. Here s why you
More informationDevelopment Centre for Evaporation and Thermal Separation Technologies
Development Centre for Evaporation and Thermal Separation Technologies The Pilot Plant of GIG Karasek Our Company In Europe, GIG Karasek is a leading manufacturer in the field of system and apparatus construction
More informationB r i g h t I d e a s
CJC TM Desorber Solutions for removal of water from low and high viscosity oils, even in stable emulsions Intended for: Marine, Steel Works, Pulp & Paper, Mining, Power, Waste Oil Recovery Plants and Biodiesel
More informationInstant hot water Feed-Forward system unlimited supply accurate to +/- 4 F
Count on Graham for proven reliability. Graham is one of the world s foremost designers and manufacturers of vacuum and heat transfer equipment with over a half-century of proven experience. Our in-house
More informationThermal Simulation of a Heat Pipe Tempered Injection-Mould Tool
Thermal Simulation of a Heat Pipe Tempered Injection-Mould Tool S. Kartelmeyer 1*, L. Fromme 1, V. Hüttemann 1, E. Moritzer 2, C. Jaroschek 1 1 University of Applied Sciences, Faculty of Engineering and
More informationAN EXPERIMENTAL REFRIGERATOR WITH AN INVERSE AIR CYCLE FOR FREEZING IQF FOOD PRODUCTS
AN EXPERIMENTAL REFRIGERATOR WITH AN INVERSE AIR CYCLE FOR FREEZING IQF FOOD PRODUCTS Andrew Gigiel, Giuliano Giuliani, Fabio Polonara and Christian Vitale Andrew Gigiel CCC Consultants, Fariview Moorlynch
More informationInternational Journal of Advance Research in Engineering, Science & Technology SOLAR HUMIDIFIER
Impact Factor (SJIF): 4.42 International Journal of Advance Research in Engineering, Science & Technology e-issn: 2393-9877, p-issn: 2394-2444 Volume 4, Issue 11, November-217 SOLAR HUMIDIFIER PATEL RONIT
More informationJet Vacuum Systems. GEA Wiegand GmbH
Jet Vacuum Systems GEA Wiegand GmbH The basics of jet vacuum pumps Jet vacuum pumps are used to create and maintain the vacuum in evaporators, driers, in distillation and rectification plants, and in the
More informationPLATE HEAT EXCHANGERS FOR MARINE APPLICATIONS
PLATE HEAT EXCHANGERS FOR MARINE APPLICATIONS www.tranter.com There are times when the reliability of your equipment is crucial! When conditions are tough, crew and equipment are really put to the test.
More informationCFD Analysis of a 24 Hour Operating Solar Refrigeration Absorption Technology
IJIRST International Journal for Innovative Research in Science & Technology Volume 1 Issue 11 April 2015 ISSN (online): 2349-6010 CFD Analysis of a 24 Hour Operating Solar Refrigeration Absorption Technology
More informationSPECIFICALLY DESIGNED FOR WASTE AND RDF
WWW.MACPRESSE.COM SPECIFICALLY DESIGNED FOR WASTE AND RDF MUNICIPAL SOLID WASTE PROCESSING RECYCLING SECONDARY RAW MATERIAL RENEWABLE ENERGY AND BIOMASS PAPER INDUSTRY Copyright Macpresse Europa - P.IVA
More informationExperimental Study of Direct Contact Condensation of Steam on Water Droplets
, July 1-3, 2015, London, U.K. Experimental Study of Direct Contact Condensation of Steam on Water Droplets Semra GUMRUK, Murat K. AKTAS Abstract Air or water cooled condensers are used to reduce the moisture
More informationFLACS-Risk Unique 3D risk modelling software. FLACS-Risk: Product presentation FLUG May 2016
FLACS-Risk Unique 3D risk modelling software Outline FLACS-Risk Overview Motivation for developing FLACS-Risk Features of FLACS-Risk v1.0 Development process and timeline Possible future added modules
More informationExperimental study on heat transfer characteristics of horizontal concentric tube using twisted wire brush inserts
International Journal of Current Engineering and Technology E-ISSN 2277 416, P-ISSN 2347 5161 216 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Experimental
More informationABEL CM. Compact Diaphragm Pumps Piston Diaphragm pumps for difficult media. From the reciprocating positive displacement pump specialist
ABEL CM From the reciprocating positive displacement pump specialist Compact Diaphragm Pumps Piston Diaphragm pumps for difficult media 3 Diaphragm Pumps Solids Handling Pumps High Pressure Pumps Marine
More informationInstitute of Sustainable Energy Technology, The University of Nottingham, NG7 2RD * Corresponding author
12 th International Conference on Sustainable Energy Technologies (SET-2013) 26-29th August, 2013 Hong Kong A Novel Solid Oxide Fuel Cell Tri-Generation System for Low Carbon Buildings Theo Elmer 1*, Mark
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16468 March 2013 ICS 65.100.01; 67.050 English Version Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass
More informationOpen Cycle Liquid Desiccant Air Conditioning Systems Theoretical and Experimental Investigations
43rd ANZSES Conference Solar 24, Denedin (NZ), 28.11.-3.11.5, CD Abstract Open Cycle Liquid Desiccant Air Conditioning Systems Theoretical and Experimental Investigations M., W. Saman, K. Vajen* Sustainable
More informationLÖDIGE ALWAYS THE RIGHT MIX
Lödige Coating System LC LÖDIGE ALWAYS THE RIGHT MIX 1 Coating Applications Lödige Coaters have been a success in film and sugar coating processes for various products since 1980. Coating technology has
More informationOperation Manual. Plateheatexchanger. Read and follow the operating instructions and safety information before using for the first time.
Operation Manual Plateheatexchanger Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations,
More informationEvaporators. Direct Expansion Flooded Recirculated Over Feed
Evaporators Purpose: Liquid Refrigerant is Boiled from a Low Pressure Liquid to a Low Pressure Gas by Absorbing Heat from the Medium that is being Cooled Types: Direct Expansion Flooded Recirculated Over
More informationFLACS-based gas detection layout optimisation and the roll-out of the FLACS-HPC service
FLACS-based gas detection layout optimisation and the roll-out of the FLACS-HPC service Lars Pesch Gexcon Outline The Fortissimo II project & collaboration with EPCC + Micropack How to support CFD-based
More informationAIR COMPRESSORS -TURBO COMPRESSORS
AIR COMPRESSORS -TURBO COMPRESSORS STANDARD EQUIPMENT Turbo compressors represent the latest technology achieved in the production of industrial air compressors. We are proud to manufacture these products
More informationDEi COMPRESSED AIR & GAS TREATMENT. Purifying your compressed air, increasing your efficiency.
COMPRESSED AIR & GAS TREATMENT DEi Refrigeration dryers with Energy Saving Impulse Technology and Thermal Mass Nominal air flow 0,3-32,0 m³/min. Purifying your compressed air, increasing your efficiency.
More informationImpact of indirect evaporative air cooler type on the performance of desiccant systems
Impact of indirect evaporative air cooler type on the performance of desiccant systems Anna Pacak 1,*, Aleksandra Cichoń 1, Demis Pandelidis 1, and Sergey Anisimov 1 1 Wrocław University of Science and
More information- EVAPORATION PANELS FOR ALL COOLING TOWERS ADVANTAGES MORE SECURE - MORE EFFICIENT - UNIVERSAL
ADVANTAGES MORE SECURE - MORE EFFICIENT - UNIVERSAL The best for dirty and clean water applications Less resistance to the air saves electrical energy No clogging Resists to high temperatures up to 110
More informationOCHSNER CO 2 heat pipes an option for vertical collectors
OCHSNER CO 2 heat pipes an option for vertical collectors Karl Ochsner Dipl.-Ing. ETH Content: Benefit of using CO 2 as heat transfer medium Function of a CO 2 heat pipe Exemplary installation of a ground
More information[Eswaran, 3(3): March, 2014] ISSN: Impact Factor: 1.852
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY Numerical Study on Solar Water Heater using CFD Analysis S.Eswaran *1,M.Chandru 2,M.Vairavel 3, R.Girimurugan 4 *1 Assistant professor,
More informationWATER EVAPORATION UNITS
WATER EVAPORATION UNITS Professional Industrial Ergonomic Formeco s.r.l. Via Cellini, 33 35027 Noventa Padovana Padova Italy www.formeco.com SERIES HP HEAT PUMP HP-S series with immersed heating coils
More informationShuzo Murakami, Shinsuke Kato, and Taeyeon Kim Institute of Industrial Science, University of Tokyo Tokyo, Japan
INDOOR CLIMATE DESIGN BASED ON FEEDBACK CONTROL OF HVAC COUPLED SIMULATION OF CONVECTON, RADIATION, AND HVAC CONTROL FOR ATTAINING GIVEN OPERATIVE TEMPERATURE Shuzo Murakami, Shinsuke Kato, and Taeyeon
More informationCentre for Air Conditioning and Refrigeration. Retail refrigeration. Judith Evans, Ed Hammond and Alan Foster London South Bank University
Centre for Air Conditioning and Refrigeration Retail refrigeration Judith Evans, Ed Hammond and Alan Foster London South Bank University Retail refrigeration Temperature control, carbon emissions increase
More informationXERIC. Prof. Dr. Ing. Gilbert M. Rios Head WP5 / Dissemination - Communication
XERIC Prof. Dr. Ing. Gilbert M. Rios Head WP5 / Dissemination - Communication This project has received funding from the [European Union s Horizon 2020 research and innovation programme under grant agreement
More informationOIL AND GAS INDUSTRY
FIRED HEATER DESIGN This case study demonstrates the implementation of an API 560 fired heater compound component in Flownex. It also shows how Flownex has been used during the process design and preliminary
More informationFeasibility Study of Condensation Heat Exchanger with Helical Tubes for a Passive Auxiliary Feedwater System
Feasibility Study of Condensation Heat Exchanger with Helical Tubes for a Passive Auxiliary Feedwater System Kwanghee Seo 1) and Taewan Kim 2)* 1) KEPCO Engineering & Construction Company. INC., 269 Hyeoksin-ro,
More informationSpecialized in the design and the tailor-made production of dryers, coolers and thermal processing equipment for industrial use.
Specialized in the design and the tailor-made production of dryers, coolers and thermal processing equipment for industrial use. Thermal processing solutions Ingetecsa supplies thermal processing solutions
More informationDevelopment and Performance Measurements of a Small Compressor for Transcritical CO2 Applications
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2004 Development and Performance Measurements of a Small Compressor for Transcritical CO2
More informationTOXIC AND FLAMMABLE GAS CLOUD DETECTORS LAYOUT OPTIMIZATION USING CFD
Introduction to the case Gas detectors are commonly installed in process facilities to automatically alarm and trigger safety measures in response to hazardous leaks. Without effective leak detection,
More informationHeat Transfer Enhancement using Herringbone wavy & Smooth Wavy fin Heat Exchanger for Hydraulic Oil Cooling
Enhancement using Herringbone wavy & Smooth Wavy fin Exchanger for Hydraulic Oil Cooling 1 Mr. Ketan C. Prasadi, 2 Prof. A.M. Patil 1 M.E. Student, P.V.P.I.T.,Budhagaon,Sangli AP-India 2 Associate Professor,
More informationEXPLORER HEAT PUMP WATER HEATER. A+ in READY Smart heat pump
HEAT PUMP WATER HEATER EXPLORER 7% energy savings * Wide temperature range of use (- to + C) ACI hybrid anti-corrosion protection Smart energy consumption control Remote piloting with Cozytouch technology
More informationReducing energy consumption of airconditioning systems in moderate climates by applying indirect evaporative cooling
Reducing energy consumption of airconditioning systems in moderate climates by applying indirect evaporative cooling Aleksandra Cichoń,*, Anna Pacak, Demis Pandelidis, and Sergey Anisimov Department of
More informationHeat Exchanger Earny Type
Big Dutchman International GmbH Heat Exchanger Earny Type 4. Efficiency of heat recovery under practical conditions DLG Test Report 614 F Revision 1: Amendment(s) see page 1 Assessment summary The DLG
More informationA Technical Introduction to Cool Thermal Energy Storage Commercial Applications
A Technical Introduction to Cool Thermal Energy Storage Commercial Applications Cool Thermal Energy Storage is a new application of an old idea that can cut air conditioning energy costs in half while
More informationFLACS-Fire. Djurre Siccama Gexcon R&D and Software VP Products. FLUG 3 rd - 4 th. November 2015, Shanghai China
FLACS-Fire Djurre Siccama Gexcon R&D and Software VP Products Introduction to FLACS-Fire GOAL: Provide FLACS users with an efficient complete toolbox for dispersion, explosion and fire modelling. Calculation
More informationRefrigeration dryers with Energy Saving Impulse Technology and Thermal Mass 0,3-27,0 m³/min Purifying your compressed air, increasing your efficiency.
Refrigeration dryers with Energy Saving Impulse Technology and Thermal Mass 0,3-27,0 m³/min Purifying your compressed air, increasing your efficiency. Refrigeration dryers with Energy Saving Impulse Technology
More informationice 3000 Series Atomic Absorption Spectrometers
e l e m e n t a l a n a l y s i s ice 3000 Series Atomic Absorption Spectrometers Refreshingly different Atomic Absorption... just add ice Food & Agriculture Environmental Clinical & Pharmaceutical Metals
More informationWaste Heat Recovery Using the Example of Slag Fuming
Waste Heat Recovery Using the Example of Slag Fuming Waste Heat Recovery Using the Example of Slag Fuming Stefan Köster 1. Introduction...329 1.1. Waste Heat Recovery downstream Ausmelt Process...330 1.2.
More informationMax-3 Steel Shell Boiler
Max-3 Steel Shell Boiler Responsibility for energy and environment Output range 500 to 3000 kw 1 Why choose Max-3? The Hoval Max-3 boiler delivers market-leading efficiency and cost effective heating performance.
More informationINTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY
INTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY A PATH FOR HORIZING YOUR INNOVATIVE WORK EXPERIMENTAL INVESTIGATION OF HELICAL COIL AND STRAIGHT TUBE HEAT EXCHANGER 1.
More informationMastering the elements
100% Stainless Steel Mastering the elements AlfaNova Fusion-brazed plate heat exchangers AlfaNova Extreme elements extreme technology From the extreme heat of our brazing process comes AlfaNova, the world
More informationProceedings Design, Fabrication and Optimization of a Silicon MEMS Natural Gas Sensor
Proceedings Design, Fabrication and Optimization of a Silicon MEMS Natural Gas Sensor Marjan Shaker 1,, Erik Sundfør 3, Gaël Farine 3, Conor Slater 3, Pierre-André Farine 1 and Danick Briand, * 1 Electronic
More informationCryogenic cooling with CUMULUS LF.
Cryogenic lyophilisation Cryogenic cooling with CUMULUS LF. Improved performance, high reliability and low maintenance for your lyophilisers. 02 Improving performance of freeze dryers with cryogenic cooling.
More informationUltraHeat Plate and Frame Heat Exchangers. Engineered for Excellence
UltraHeat Plate and Frame Heat Exchangers Engineered for Excellence Graham Corporation traces its history to the earliest development of heat transfer products in the United States during the 1920s, when
More informationMultiphase-Simulation of Membrane Humidifiers for PEM Fuel Cells
Multiphase-Simulation of Membrane Humidifiers for PEM Fuel Cells STAR Global Conference Sebastian Bilz, Vladimir Buday, Carolus Gruenig, Thomas von Unwerth Vienna, March 17-19, 2014 1 CFD Simulation of
More informationDECOMMISSIONING OF THE REACTOR VESSEL OF THE COMPACT SODIUM COOLED NUCLEAR REACTOR FACILITY (KNK)
DECOMMISSIONING OF THE REACTOR VESSEL OF THE COMPACT SODIUM COOLED NUCLEAR REACTOR FACILITY (KNK) J. Benkert, F. Willman Westinghouse Electric Germany GmbH Mannheim / D K. Brockmann, I. Hillebrand Research
More informationAir Cross 21 Installation and User Manual
Air Cross 21 Installation and User Manual 1 Introduction AirCross BPHE is a stainless steel cross flow plate heat exchange which is vacuume brazed with pure copper or nickel based material as the brazing
More informationPerformance Study of Triple Concentric Pipe Heat Exchanger
Performance Study of Triple Concentric Pipe Heat Exchanger #1 Pravin M. Linge, #2 A. B. Korane, #3 V. N. Kapatkar #123 Mechanical Engineering Department, Sinhgad College of Engineering, SPPU, Pune, India
More informationUltraOil Condensing Oil Boiler
UltraOil Condensing Oil Boiler Responsibility for energy and environment Output range 35 to 600 kw Why choose UltraOil? The UltraOil condensing boiler featuring our patented alufer heat exchanger and two-stage
More informationTransformer oil coolers BETA & CETA
2012.1 Transformer oil coolers BETA & CETA Transformer oil coolers BETA & CETA Luvata is pleased to present to the market its renewed transformer oil coolers. The BETA and CETA series of transformer oil
More informationASSESSING THE FIRE PERFORMANCE OF ELECTRIC CABLES (FIPEC)
ASSESSING THE FIRE PERFORMANCE OF ELECTRIC CABLES (FIPEC) P. Van Hees and J. Axelsson, SP Sweden, S. J. Grayson and A. M. Green, Interscience Communications UK, H Breulet, ISSeP Belgium and U Vercellotti,
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for uppers and lining Water vapour permeability and absorption
INTERNATIONAL STANDARD ISO 17699 First edition 2003-10-15 Footwear Test methods for uppers and lining Water vapour permeability and absorption Chaussures Méthodes d'essai des tiges et des doublures Perméabilité
More informationPRODUCT CATALOG.
www.dalgakiran.com PRODUCT CATALOG 2017 Since the establishment of our company by Ömer Dalgakıran in 1965, we are a family that grows everyday; reaching 500 persons, this family develops its products and
More informationThermal Analysis of Concentric Tube Heat Exchanger Using Louvered Strip Inserts
Thermal Analysis of Concentric Tube Heat Exchanger Using Louvered Strip Inserts Anoop P S 1, N. Sreenivasalu Reddy 2 1 PG scholar, Raja Rajarajeswari College of Engineering, Bangalore-560074, Karnataka,
More informationLeica EM CPD030 Order List Version 10/2008
Leica EM CPD030 Order List Version 10/2008 16BUG03500 16BUG03501 LEICA EM CPD030 Critical Point Dryer 230 240 V / 50 60 Hz 115 V / 60Hz - Solvent resistant metal housing - Operation panel with integrated
More informationNF EN V2/AC2 DÉCEMBRE Normes en ligne. Pour : CERN. Client : Commande : N T. le : 10/04/2018 à 17:39
NF EN 13445-5 V2/AC2 DÉCEMBRE 2016 Ce document est à usage exclusif et non collectif des clients Normes en ligne. Toute mise en réseau, reproduction et rediffusion, sous quelque forme que ce soit, même
More informationA Review on Analysis of Vapour Compression Refrigeration System Using Matrix Heat Exchanger
A Review on Analysis of Vapour Compression Refrigeration System Using Matrix Heat Exchanger Chetan Papade Department of Mechanical Engineering N.K.Orchid college of Engg.& Tech., Solapur, Maharashtra,
More information