SOUTH AFRICAN NATIONAL STANDARD
|
|
- Dennis Caldwell
- 5 years ago
- Views:
Transcription
1 ISBN Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 SOUTH AFRICAN NATIONAL STANDARD Road marking materials Drop on materials Glass beads, antiskid aggregates and mixtures of the two This national standard is the identical implementation of EN 1423:2012 and EN technical corrigendum 1, and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 Table of changes Change No. Date Scope EN tech. corr Corrected to update materials in the requirements for granulometry, and to change the titles of the tables on example 3: microns and example 4: microns (tables 10 and 11). National foreword This South African standard was approved by National Committee SABS/TC 035/SC 02, Paints and varnishes Road marking paints, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in September This document supersedes SANS 51423:1997 (edition 1). SABS
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS Licensed exclusively to SABS. English version Version Française Deutsche Fassung EN 1423:2012/AC February 2013 Février 2013 Februar 2013 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two Produits de marquage routier - Produits de saupoudrage - Microbilles de verre, granulats antidérapants et mélange de ces deux composants Straßenmarkierungsmaterialien - Nachstreumittel - Markierungs-Glasperlen, Griffigkeitsmittel und Nachstreugemische This corrigendum becomes effective on 20 February 2013 for incorporation in the three official language versions of the EN. Ce corrigendum prendra effet le 20 février 2013 pour incorporation dans les trois versions linguistiques officielles de la EN. Die Berichtigung tritt am 20. Februar 2013 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. No.:EN 1423:2012/AC:2013 D/E/F
4 1 Modification to 4.1.3, Granulometry In the 3 rd paragraph, in the 1 st and 2 nd dashes, replace "antiskid aggregates" with "beads". 2 Modification to 4.2.2, Granulometry In third paragraph, in the 5 th dash, replace "beads" with "antiskid aggregates". 3 Modification to 4.3.3, Granulometry Replace the title of the Table 10 with the following: Table 10 Example 5: microns. Replace the title of the Table 11 with the following: Table 11 Example 6: microns.
5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM Licensed exclusively to SABS. EN 1423 February 2012 ICS Supersedes EN 1423:1997 English Version Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two Produits de marquage routier - Produits de saupoudrage - Microbilles de verre, granulats antidérapants et mélange de ces deux composants Straßenmarkierungsmaterialien - Nachstreumittel - Markierungs-Glasperlen, Griffigkeitsmittel und Nachstreugemische This European Standard was approved by CEN on 17 December CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1423:2012: E
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
More informationEN ISO :2005/AC
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 9100-4:2005/AC October 2009 Octobre 2009 Oktober 2009 ICS 55.100 English version Version Française Deutsche Fassung Glass containers - Vacuum
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
More informationIrish Standard I.S. EN :2013&AC:2014
Irish Standard I.S. EN 16291-2:2013&AC:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish CEN 2014 No copying without NSAI permission except as permitted by
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
More informationSANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
More informationRespiratory protective devices - Particle filters - Requirements, testing, marking
Irish Standard Respiratory protective devices - Particle filters - Requirements, testing, marking NSAI 2000 No copying without NSAI permission except as permitted by copyright law. EN 143:2000/AC:2005
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
More informationEN ISO/IEC :2016/AC
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 29.260.20 EN ISO/IEC 80079-20- 2:2016/AC October 2017 Octobre 2017 Oktober 2017 English version Explosive atmospheres - Part 20-2: Material characteristics
More informationČSN EN ISO OPRAVA
ICS 65.060.20 ČSN EN ISO 4254-5 OPRAVA 2 47 0601 Srpen 2011 ČESKÁ TECHNICKÁ NORMA Zemědělské stroje Bezpečnost Část 5: Motorem poháněné stroje pro zpracování půdy Úřad pro technickou normalizaci, metrologii
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
More informationIrish Standard I.S. EN :2006
Irish Standard I.S. EN 1996-3:2006 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (Including Irish National Annex) NSAI 2006 No copying
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
More informationCorrigendum I.S. EN ISO :2003/AC:2006. This is a free 15 page sample. Access the full version online.
Corrigendum I.S. EN ISO 14698-2:2003/AC:2006 Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003)
More informationEurokodas 1. Poveikiai konstrukcijoms. 1-3 dalis. Bendrieji poveikiai. Sniego apkrovos
LIETUVOS STANDARTAS LST EN 1991-1-3/AC PATAISA AC ANGLIŠKOJI VERSIJA 2009 m. balandis ICS 91.010.30 Eurokodas 1. Poveikiai konstrukcijoms. 1-3 dalis. Bendrieji poveikiai. Sniego apkrovos Eurocode 1 - Actions
More informationEurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
Irish Standard I.S. EN 1991-1-3:2003&AC:2009&A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads CEN 2015 No copying without NSAI permission except as permitted by copyright
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
More informationOpakowania szklane -- Próżniowe zamknięcia gwintowanych główek -- Część 3: Typ 38 normalna
POPRAWKA do POLSKIEJ NORMY ICS 55.100; PN-EN ISO 9100-3:2006/AC grudzień 2009 Wprowadza EN ISO 9100-3:2005/AC:2009, IDT ISO 9100-3:2005/AC1:2009, IDT Dotyczy PN-EN ISO 9100-3:2006 Opakowania szklane --
More informationProjektowanie i budowa sieci ciepłowniczych z systemu preizolowanych rur zespolonych
POPRAWKA do POLSKIEJ NORMY ICS 91.140.10; PN-EN 13941:2009/AC maj 2010 Wprowadza EN 13941:2009/AC:2009, IDT Dotyczy PN-EN 13941:2009 Projektowanie i budowa sieci ciepłowniczych z systemu preizolowanych
More informationHEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationPlastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
Irish Standard Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage (ISO 294-4:2001) NSAI 2003 No copying without NSAI permission except
More informationPOPRAWKA do POLSKIEJ NORMY PN-EN ISO :2010/AC. Dotyczy PN-EN ISO :2010
POPRAWKA do POLSKIEJ NORMY ICS 91.060.50; 91.120.10; PN-EN ISO 12567-1:2010/AC grudzień 2010 Wprowadza EN ISO 12567-1:2010/AC:2010, IDT ISO 12567-1:2010/AC1:2010, IDT Dotyczy PN-EN ISO 12567-1:2010 Cieplne
More informationCLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005
IRISH STANDARD I.S. EN ISO 4630-1:2005 ICS 87.060.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: Tel:
More informationILNAS-EN ISO 23640:2015
In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen
More informationBiologiczna ocena wyrobów medycznych -- Część 7: Pozostałości po sterylizacji tlenkiem etylenu
POPRAWKA do POLSKIEJ NORMY ICS 11.100.20; PN-EN ISO 10993-7:2009/AC maj 2010 Wprowadza EN ISO 10993-7:2008/AC:2009, IDT ISO 10993-7:2008/AC1:2009, IDT Dotyczy PN-EN ISO 10993-7:2009 Biologiczna ocena wyrobów
More informationGlass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)
Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 7200:2004 Technical product documentation - Data fields in title blocks and document headers Technical product documentation - Data fields in title blocks and document headers
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationLABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code
IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED
More informationPetroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008)
Irish Standard I.S. EN ISO 28300:2008 Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008) NSAI 2008 No copying without NSAI permission
More informationSýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015
ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun
More informationSýnishorn Maintenance - Qualification of maintenance personnel
ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationLIETUVOS STANDARTAS LST EN ISO /AC PATAISA AC
LIETUVOS STANDARTAS LST EN ISO 6974-1/AC PATAISA AC ANGLIŠKOJI VERSIJA 2013 m. sausis ICS 13.340.20; 75.060 Gamtin s dujos. Dujų sud ties ir susijusios neapibr žties nustatymas dujų chromatografijos metodu.
More informationCOMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :
IRISH STANDARD I.S. EN 13757-2:2005 ICS 33.200 35.100.10 35.100.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: Tel:
More informationSýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -
More informationSýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics
ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationEurocode 9 Design of aluminium structures
BRITISH STANDARD Eurocode 9 Design of aluminium structures BS EN 1999-1-2:2007 Incorporating corrigenda December 2008, March 2009 and October 2009 Part 1-2: Structural fire design ICS 91.010.30; 91.080.10;
More informationMedical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003)
Irish Standard Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. EN
More informationCONFORMITY ASSESSMENT - SUPPLIER'S
STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationSýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 4170:2007 Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle Aerospace series - Paints and varnishes - Test method
More informationILNAS-EN ISO :2005
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -
More informationILNAS-EN ISO :2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich
More informationSýnishorn Safety of woodworking machines - One side thickness planing machines
EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15205:2007 Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis Determination of hexavalent chromium in corrosion protection layers - Qualitative
More informationELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code
IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800
More informationWATER QUALITY - CRITERIA FOR
STANDARD I.S. EN ISO 17994:2004 ICS 07.100.20 13.060.70 National Standards Authority of Ireland Dublin 9 Ireland WATER QUALITY - CRITERIA FOR Tel: (01) 807 3800 Fax: (01) 807 3838 ESTABLISHING EQUIVALENCE
More informationPLASTICS - DETERMINATION OF THE MELT
IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1
More informationOffice furniture - Office work chair - Part 2: Safety requirements
Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN
More informationSN EN ISO OPRAVA
ICS 97.040.30 SN EN ISO 15502 OPRAVA 1 14 2711 erven 2008 ESKÁ TECHNICKÁ NORMA Chladicí za ízení pro domácnost Charakteristiky a zkušební metody eský normaliza ní institut, 2008 Podle zákona. 22/1997 Sb.
More informationPAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code
IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF
More informationPACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code
STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL
More informationhttp://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14975:2007 Fastställd 2007-01-04 Utgåva 1 Stegar Vindsstegar
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates Characterization of waste - Determination of total dissolved solids (TDS)
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12904:2005 Products used for treatment of water intended for human consumption - Silica sand and silica gravel Products used for treatment of water intended for human consumption
More informationILNAS-EN ISO 2692:2006
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 2486:2005 Aerospace series - Aluminium alloy AL- P2618A - Forging stock Aerospace series - Aluminium alloy AL-P2618A - Forging stock EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationSýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails
ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry
More informationSýnishorn Windows and doors - Watertightness - Test method
ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS
More informationCONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code
IRISH STANDARD I.S. EN 60375:2003 ICS National Standards Authority of Ireland Dublin 9 Ireland CONVENTIONS CONCERNING ELECTRIC AND Tel: (01) 807 3800 Tel: (01) 807 3838 MAGNETIC CIRCUITS (IEC 60375:2003)
More informationGeregistreerde Belgische norm
ICS: 79.080 Geregistreerde Belgische norm NBN EN 13442 2e uitg., mei 2013 Normklasse: B 16 Houten vloeren en wand- en plafondbetimmeringen van hout - Bepaling van de weerstand tegen chemische stoffen Planchers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 7-2:2004 Plastics - Determination of temperature of deflection under load - Part 2: Plastics, ebonite and long-fibrereinforced composites Plastics - Determination of temperature
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 9554:2005 Fibre ropes - General specification Fibre ropes - General specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationSmoke and heat control systems Part 1: Specification for smoke barriers
SVENSK STANDARD SS-EN 12101-1:2005/A1:2006 Fastställd 2006-04-05 Utgåva 1 Brand och räddning System och komponenter för rök- och brandgaser Del 1: Krav för flam- och rökskärmar Smoke and heat control systems
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 15902:2005 Optics and optical instruments - Diffractive optics - Vocabulary Optics and optical instruments - Diffractive optics - Vocabulary EESTI STANDARDIKESKUS EESTI STANDARDI
More informationDECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15182-1:2007 Hand-held branchpipes for fire service use - Part 1: Common requirements Hand-held branchpipes for fire service use - Part 1: Common requirements EESTI STANDARDIKESKUS
More informationSVENSK STANDARD SS-EN 4616:2005. Aerospace series Magnesium alloy MG-C18002 T4 Chill casting. Fastställd Utgåva 1
SVENSK STANDARD SS-EN 4616:2005 Fastställd 2005-11-03 Utgåva 1 Aerospace series Magnesium alloy MG-C18002 T4 Chill casting ICS 49.025.15 Språk: engelska Publicerad: december 2005 Copyright SIS. Reproduction
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 1670:2007 Fastställd 2007-03-23 Utgåva 2 Byggnadsbeslag Korrosionsmotstånd Krav och provningsmetoder Building hardware Corrosion resistance Requirements
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 61033:2007 This document is a preview generated by EVS Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate Test methods for the
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12593:2007 Bitumen and bituminous binders - Determination of the Fraass Breaking Point Bitumen and bituminous binders - Determination of the Fraass breaking point EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11064-4:2004 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations Ergonomic design of control centres - Part 4: Layout and dimensions of workstations
More informationPISTON-OPERATED VOLUMETRIC
IRISH STANDARD I.S. EN ISO 8655-7:2005 ICS 17.060 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF National Standards Authority of Ireland Glasnevin, Dublin
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection Water quality - Determination of soluble silicates by flow
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 9111:2006 Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000) Aerospace series - Quality management systems
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14854:2006 Aerosol containers - Glass containers - Dimensions of the neck finish Aerosol containers - Glass containers - Dimensions of the neck finish EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 2465:2007 Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa Rm 680 MPa - Bar for machining - 4 mm De 100 mm Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened
More informationALARM SYSTEMS - INTRUSION AND
IRISH STANDARD I.S. EN 50131-1:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 1: SYSTEM Tel: +353 1 807 3800 Fax:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al)
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN ISO 8988:2006 Fastställd 2006-09-18 Utgåva 2 Plast Fenolharts Bestämning av halt hexametyltetraamin Kjeldahlmetoden, överklorsyrametoden och saltsyrametoden
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10328:2005 Iron and steel - Determination of the conventional depth of hardening after surface heating Iron and steel - Determination of the conventional depth of hardening after
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12125:2005 Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate Chemicals used for treatment of water intended for human consumption - Sodium
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 13758-2+A1:2007 Fastställd 2007-01-15 Utgåva 1 Textil Skyddsegenskaper mot UV-strålning Del 2: Klassificering och märkning av kläder Textiles Solar
More informationInredning Köksinredning och apparater Måttsamordning. Kitchen furniture Co-ordinating sizes for kitchen furniture and kitchen appliances
SVENSK STANDARD SS-EN 1116:2004 Fastställd 2004-07-16 Utgåva 2 Inredning Köksinredning och apparater Måttsamordning Kitchen furniture Co-ordinating sizes for kitchen furniture and kitchen appliances ICS
More informationSTEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.
IRISH STANDARD I.S. EN 10298:2005 ICS 23.040.10 23.040.40 25.220.99 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3375-007:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard Aerospace series - Cable, electrical,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 8502-5:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride
More informationEnglish version. Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
INTERPRETATION SHEET FEUILLE D'INTERPRETATION INTERPRETATIONSBLATT February 2014 ICS 13.320 EN 50131-2-7-1/IS1 English version Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 60079-30-2:2007 Explosive - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance Explosive - Part 30-2: Electrical resistance
More information