Battery Interconnects
|
|
- Monica Poole
- 6 years ago
- Views:
Transcription
1 Battery Interconnects Product Facts Total interface solution Current capacity 7 Amps/ single contact at 30 C T-Rise Choice of right-angle or vertical mount headers with left, right or keyless polarization 5.0 mm pitch headers available for 7.2, 10.8, and 12.0 volt rechargeable batteries Receptacle connectors available with solder tails or weld tabs Consumer friendly mating/unmating of battery Produced under a Quality Management System certified to ISO 9001 Blade Contacts for high durability Used Industry-wide for rechargeable battery I/O in laptop computers Offered in a variety of key arrangements for different voltage batteries 2.0 mm, 2.5 mm, 3.0 mm and 5.0 mm contact pitch batteries available MDI systems designed to mate at any angle Up to 7 Amps per contact Up to 2500 cycle durability Two pc tails per blade for better current distribution Since the introduction of the standard-size NiMH rechargeable battery to the computer and communications industries, Tyco Electronics has played a major role in the development and manufacture of reliable, high performance battery interconnect systems. As the needs and applications of original equipment manufacturers have evolved, so have Tyco Electronics battery interconnect systems. Today, we offer several types of connectors including: Standard 5-position, 5.0 mm centerline assemblies Space efficient battery packs available at 2.0 mm, 2.5 mm, and 3.0 mm centerlines Multi-Directional Interconnection (MDI) systems Coin cell battery holders All battery interconnect assembly housings are made of high temperature, thermoplastic. Single contacts are rated at 7 Amps with a 30 T-Rise, and have an operating temperature rating of -30 to +70 C. These assemblies can be customized for various applications and are available with many keying and mounting options. Tyco Electronics answers the need in the portable equipment market for a high density, robust, and versatile interconnection system with the Multi- Directional Interconnection (MDI) System. This durable system, designed to permit mating/unmating at any angle between 0 and 90, features AMP-DURAGOLD plated contacts for up to 2500 cycles. Our coin-cell battery holders are ideal for a variety of electronic equipment needing a compact low wattage (typically less than 2 Watts) battery source. These holders are available in both horizontal and vertical mount. Surface-mount and re-flow compatible options are also ready to meet the newer PCB assembly requirements. 227
2 2.0 mm Pitch Battery Assemblies 2.0 mm Pitch Plug Assemblies Contacts High conductivity copper alloy, gold plating No. of Positions Mount Type Mount Angle Part Number Special Features 3 Surface-Mount Vertical Through Hole Right-Angle Retention Leg 8 Through Hole Right-Angle Surface-Mount Vertical Nut Plate (both sides) 10 Surface-Mount Vertical Surface-Mount Vertical One side nut plate Through Hole Right-Angle M2 Nut M2 Nut Pitch Retention Leg (Part Number Feature) 2 mm Plug Assembly with Nut Plates M2 Nut Pitch 2 mm Plug Assembly with Nut Plate (One Side) 2.0 mm Pitch Receptacle Assemblies Contacts High conductivity copper alloy, gold plating No. of Positions Mount Type Mount Angle Part Number 3 Surface-Mount Vertical Surface-Mount Vertical Through Hole Vertical Surface-Mount Vertical Through Hole Vertical Surface-Mount Vertical Pitch 2.0 mm Receptacle Assembly, Surface-Mount Pitch 228 Note: All part numbers are RoHS compliant. Tin-lead versions are available upon request. 2.0 mm Receptacle Assembly, Through Hole Mount
3 2.0 mm Pitch Multi-Directional Interconnection (MDI) Systems 6-Position Multi-Directional Headers Housing Black liquid crystal polymer, Contacts Brass, plated [ ] min. gold on mating area, [0.0038] min. tin on solder tail, all over [ ] min. nickel Mount Type Boardlocks Part Number Special Features Through Hole With Sequenced contacts Retention Tails Without Straight Solder Sequenced contacts.359 [9.13].359 [9.13].591 [15.00] Part Number Straight s.689 [17.50].591 [15.00] Part Number Below-the-Board Retention Tails.148 [3.75].125 [3.18].240 [6.10].205 [5.20] Boardlock 2 Plcs. Part Number Position Multi-Directional Receptacles Housing Black liquid crystal polymer, Contacts Phosphor bronze, plated [ ] min. gold on mating area, [0.0038] min. tin on solder tail, all over [ ] min. nickel Mount Type Boardlocks Part Number Surface-Mount With Through Hole Without ±.004 [22.79 ± 0.10] Part Number Through Hole Mount.897 ±.004 [22.79 ± 0.10] Part Number Through Hole Mount.113 ±.011 [28.73 ± 0.27] Boardlock 2 Plcs..375 ±.004 [9.53 ± 0.10].339 ±.006 [8.60 ± 0.16] Part Number Surface-Mount with Boardlocks.059 ±.003 [1.50 ± 0.08] Note: All part numbers are RoHS compliant. 229
4 2.5 mm Pitch Battery Assemblies 2.5 mm Pitch Plug Assemblies Contacts High conductivity copper alloy, gold plating No. of Positions Mount Type Mount Angle Part Number Special Features 4 Through Hole Right-Angle Offset M2 Nut Plate Through Hole Right-Angle Offset Through Hole Right-Angle On Board M2 Nut Plate 5 Through Hole Right-Angle On Board Through Hole Right-Angle Offset Through Hole Vertical Through Hole Right-Angle Offset M2 Nut Plate 7 Through Hole Right-Angle On Board Through Hole Right-Angle On Board M2 Nut Plate 8 Through Hole Right-Angle On Board Through Hole Right-Angle On Board Through Hole Right-Angle On Board M2 Nut Plate Through Hole Right-Angle On Board One Side M2 Nut Plate Through Hole Right-Angle Offset M2 Nut Plate M2 2 Plcs..148 [3.75].803 [20.40].146 [3.70].148 [3.75].969 [24.60].394 [10.00].199 [5.05].098 [2.50].179 [4.55].199 [5.05].098 [2.50].179 [4.55] Part Number Right-Angle On Board Assembly with Nut Plate Part Number Right-Angle Offset Assembly 2.5 mm Pitch Receptacle Assemblies Contacts High conductivity copper alloy, gold plating No. of Positions Mount Type Mount Angle Part Number 4 Through Hole Right-Angle Through Hole Right-Angle Surface-Mount Right-Angle Surface-Mount Vertical Surface-Mount Vertical Through Hole Vertical Through Hole Right-Angle Surface-Mount Vertical Through Hole Vertical [4.85].701 [17.80] Part Number Right-Angle Through Hole Mount.234 [5.95].207 [5.25].075 [1.90].992 [25.20] Part Number Vertical Surface-Mount.098 [2.50] 230 Note: All part numbers are RoHS compliant.
5 5.0 mm Pitch Battery Plug Assemblies 5.0 mm Pitch Right-Hand Key Plug Assemblies Housing Polyphthalamide,, black Contacts Brass, plated [ ] min. tin on solder tail over [ ] min. nickel overall Voltage Mount Type Mount Angle Part Number Retentive Solder Right-Angle Straight Solder Right-Angle Straight Solder Vertical Retentive Solder Vertical Straight Solder Vertical Retentive Solder Right-Angle Straight Solder Vertical Straight Solder Right-Angle [5.00] ±.008 [33.50 ± 0.20].394 ±.002 [10.00 ± 0.05].049 [1.25] Part Number Vertical Assembly with Retentive Tails.585 [14.85].392 ±.008 [9.95 ± 0.20].120 ±.012 [3.05 ± 0.30] ±.008 [29.00 ± 0.20] [5.00] Part Number Right-Angle Assembly with Straight Tails.120 ±.012 [3.05 ± 0.30] 5.0 mm Pitch Left-Hand Key Plug Assemblies Voltage Mount Type Mount Angle Part Number Special Features 12.0 Straight Solder Right-Angle Mounting Holes 10.8 Retentive Solder Right-Angle Straight Solder Right-Angle Housing Polyphthalamide,, black Contacts Brass, plated [ ] min. tin on solder tail over [ ] min. nickel overall.585 [14.85] [5.00] ±.008 [36.00 ± 0.20] Part Number Right-Angle Assembly with Mounting Holes Ø.087 ±.003 [2.20 ± 0.08] 2 Plcs..120 ±.012 [3.05 ± 0.30] 5.0 mm Pitch Keyless Plug Assemblies Voltage Mount Type Mount Angle Part Number Special Features Straight Solder Right-Angle Retentive Solder Right-Angle N/A Straight Solder Right-Angle Sequenced Contacts Retentive Solder Vertical Straight Solder Vertical Housing Polyphthalamide,, black Contacts Brass, plated [ ] min. tin on solder tail over [ ] min. nickel overall ±.008 [27.02 ± 0.20] [5.00] Part Number Right-Angle Assembly with Straight Tails & Sequenced Contacts.120 ±.012 [3.05 ± 0.30] Note: All part numbers are RoHS compliant. 231
6 5.0 mm Pitch Battery Receptacle Assemblies 5.0 mm Pitch Right-Hand Key Receptacle Assemblies Housing Black polycarbonate, Contacts Copper alloy, plated [ ] min. nickel Voltage Mount Type Part Number Surface-Mount Weld Tabs Weld Tabs Note: All receptacles include a dovetail locator. [5.00].087 ±.002 [2.20 ± 0.05].358 [9.10].396 [10.05].248 ±.003 [6.30 ± 0.08] ±.002 [33.00 ± 0.05].315 ±.001 [8.00 ± 0.03] Part Number Surface-Mount Receptacle 5.0 mm Pitch Left-Hand Key Receptacle Assemblies Housing Black polycarbonate, Contacts Copper alloy, plated [ ] min. nickel Voltage Mount Type Part Number Surface-Mount Weld Tab Note: All receptacles include a dovetail locator..087 ±.002 [2.20 ± 0.05].118 [3.00] [5.00].396 [10.05].358 [9.10] 5.0 mm Pitch Keyless Receptacle Assemblies Housing Black polycarbonate, Contacts Copper alloy, plated [ ] min. nickel.248 ±.003 [6.30 ± 0.08].315 ±.001 [8.00 ± 0.03] ±.002 [31.00 ± 0.05] Voltage Mount Type Part Number N/A Surface-Mount Note: All receptacles include a dovetail locator. [5.00].057 [1.44].443 [11.25].087 ±.002 [2.20 ± 0.05] Part Number Weld Tab Receptacle.358 [9.10].396 [10.05].248 ±.003 [6.30 ± 0.08] ±.002 [35.50 ± 0.05] 232 Note: All part numbers are RoHS compliant..315 ±.001 [8.00 ± 0.03] Part Number Receptacle
7 Coin Cell Battery Holders Horizontal Mount Battery Holders Mount Type Part Number Special Features Surface-Mount Through Hole Flexible housing for easy removal ±.003 [27.30 ± 0.08].210 [5.33].250 [6.35].750 ±.002 [19.05 ± 0.05] Part Number Through Hole Mount ±.020 [32.31 ± 0.51] ±.004 [27.31 ± 0.10].210 [5.33].250 [6.35].750 ±.002 [19.05 ± 0.05] Part Number Surface-Mount Vertical Mount Battery Holders Mount Type Part Number Special Features Through Hole Low Profile [26.42].903 [22.94].728 ±.015 [18.49 ± 0.38].136 [3.45].394 ±.008 [10.00 ± 0.20] Part Number Part Number Low Profile Note: All part numbers are RoHS compliant. 233
8 DC Power Jacks Product Facts Low Profile Design Accepts industry standard DC power plugs Available with: Solder tabs Through-hole solder tails SMT leads Available to accept these plug sizes: 0.65 mm 1.0 mm 1.3 mm 1.47 mm 1.87 mm 2.0 mm 2.35 mm 2.5 mm Ideal for portable electric devices Surface-Mount Power Jacks Pin Diameters 0.65 mm and 1.3 mm Part Number Bottom View Part Number Bottom View Vertical DC Jack Part Number Note: All part numbers are RoHS compliant.
9 DC Power Jacks (Continued) Right-Angle DC Jacks Miniature Jacks For specific part numbers, contact Tyco Electronics Center Tail Part Dia. Length Number Bottom View Shielded Jack Dia. A N.W. (q) Part Number PCB Layout (Tolerance ± 0.05) Standard Jacks Center Diameter Part Number Bottom View Standard Jack Recessed Flange For specific part numbers, contact Tyco Electronics Center Diameter Part Number Bottom View Note: All part numbers are RoHS compliant. 235
10 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity:
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height mm inch Connector Description
More informationIntroducing SlimSeal SSL Connector
Introducing SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These connectors provide low power, sealed
More informationZ-PACK TinMan 85 ohm Connector Overview
Z-PACK TinMan 85 ohm High Speed Backplane Connector Z-PACK TinMan 85 ohm Connector Overview Product Facts 10+ Gbps performance 85 ohm impedance for differential pair configuration 5 pair version offers
More informationMar11 Rev C
Product Specification 108-1441 11Mar11 Rev C Connector, Z-PACK*, 2 mm FB, Signal and Power 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Z-PACK* 2mm
More informationIntroducing Hermaphroditic Blade and Receptacle Connector
Introducing Hermaphroditic Blade and Receptacle Connector Wire-to-Board, Board-to-Board and Dust Cover Hermaphroditic Blade and Receptacle Connector : Wire-to-Board KEY FEATURES Available in 2, 4, and
More informationInverted Through Board Surface
Inverted Through Board Surface Application Specification Mount Technology (SMT) 114-13245 Connector Assembly 14 DEC 09 Rev E NOTE i All numerical values are in metric units [with U.S. customary units in
More informationPrinted Circuit Board Connectors
Printed Circuit Board Overview Printed circuit board or PCB connectors are heavy duty environmentally sealed connectors designed for wire-to-circuit board connections. TE Connectivity Industrial & Commercial
More informationLevel V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline Product Facts Termination of discrete wire sizes 26-22 AWG [0.12-0.3 mm 2 ] as well as jacketed cable and bonded ribbon cable (conductors separated)
More informationIntroduction. Technical Features
Introduction Powertrain Systems Chassis Systems Safety Systems Security Body Driver Information Convenience The AMPSEAL 16 Connector System is targeted for off-road and heavy duty industrial applications.
More informationAPPLICATIONS. Wireless Communications systems. (LAN, GSM, PCS, WCDMA, UMTS) Remote measuring equipment
RoHS Ready UMCC Ultraminiature Coax Connector & Cable Assembly Series DESCRIPTION Tyco Electronics introduces the Ultraminiature Coax Connector and Cable Assembly series products. The UMCC series is an
More informationContacts for Econoseal III Connectors Series.070 (1.8 mm) and Series.250 (6.3 mm)
Series.070 (1.8 mm) and Series.250 (6.3 mm) Introduction Tyco Electronics Econoseal III sealed connector range has been designed to meet the exacting requirements of the automotive industry, for a reliable
More informationProducts for Mobile Equipment. RoHS. Ready
Products for Mobile Equipment RoHS Ready TYCO ELECTRONICS TECHNOLOGY PORTFOLIO Connector Systems / Electromechanical Components Relays Wireless Products Sensors Fiber Optic Products Wire & Cable Application
More informationPRODUCT SPECIFICATION. 0.5mm Fine Stacking. Hermaphroditic Type BTB Connector
PRODUCT SPECIFICATION 108-115057 29OCT13 Rev. A1 0.5mm Fine Stacking Hermaphroditic Type BTB Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for 0.5mm
More informationSM CONNECTOR. 1Certified LR R Specifications. Standards. 2.5mm pitch/disconnectable Crimp style wire-to-wire connectors
.mm pitch/disconnectable Crimp style wire-to-wire connectors The SM series are.mm pitch, wire-to-wire connectors that perform reliably in high-density, small current applications. High contact pressure
More informationIntroducing Low Voltage DC Grid Interconnects
Introducing Low Voltage DC Grid Interconnects LVDC Grid Interconnects KEY FEATURES Power Feed Cable Assembly Power Feed Connectors are available upon special request comprising of the following: - Universal
More informationEVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies
EVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies APPLICATIONS High Speed I/O Multiple Channels Interconnects Switches for Fibre Channel and InfiniBand Standards TECHNICAL DOCUMENTS
More informationEVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies
EVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies APPLICATIONS High Speed I/O Multiple Channels Interconnects Switches for Fibre Channel and Infiniband Standards Internal and External
More informationSolutions for AdvancedTCA, AdvancedTCA 300, MicroTCA, and AdvancedMC Standards. RoHS. Ready
Solutions for AdvancedTCA, AdvancedTCA 300, MicroTCA, and AdvancedMC Standards RoHS Ready Introduction 2 Need more information? Call Technical Support at the numbers listed below. Technical Support is
More informationFree Height 0.8 mm Pitch Board-to-Board Connector (SMT)
Product 108-5390 Specification 31 OCT 17 Rev.F1 Free Height 0.8 mm Pitch Board-to-Board Connector (SMT) 1. SCOPE 1.1. Contents This specification covers the requirements for product performance, test methods
More informationJun08 Rev C
Product Specification Connector, Card Edge,.050 Centerline 108-14034 02Jun08 Rev C 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for Tyco Electronics.050 centerline
More informationMarch 2002 Rev O
RECOMMANDATIONS GENERALES D UTILISATION CONNECTEUR 18 VOIES MQS GENERATION II GENERAL OPERATING INSTRUCTIONS Instructions Sheet 20 March 2002 Rev O Traduit par le Service Technique le 07 octobre 2002 1.
More informationTILT SENSOR SWITCH. Item No. RBS Description Ball-Contact Version 13 Page 1 of 7 Publish Date May 29, 2018
Page 1 of 7 Publish Date May 29, 2018 FUNCTION Rotation detection at 45 in vertical position APPLICATIONS 1 Rotation Detection for kinds of monitor/device 2 Toys / Entertainment devices FEATURES 1 Suitable
More informationSwitch Basics and Applications
Switch Basics and Applications Introduction Basic Switch Types and Applications Switch Function - Mechanical Poles and Throws, Mechanical Characteristics Switch Function - Electrical Voltage and Current
More informationTools & Test Equipment
Tools & Test Equipment With such a large complement of connectors to offer, it is only fitting that you ll find an equally complete offering of Emerson termination tools.this line of products includes
More informationDIP Switches Series. Performance Characteristics Series. Materials. Technical Documents
lcoswitch DIP switches are available in standard single pole, single throw; side actuated, single pole, single throw and multiple series versions. Contacts are made of high strength copper alloy with.000030
More informationQUADRAX D-SUB CONNECTORS
QUADRAX D-SUB CONNECTORS RUGGED QUADRAX DESIGN ENABLES GIGABIT ETHERNET SPEEDS WITH SUPERIOR SHIELDING PERFORMANCE FOR SIGNAL INTEGRITY QUADRAX D-SUB CONNECTORS Quadrax High-Speed Connectors WELL ESTABLISHED
More informationType MTS Miniature Test Switches
Type MTS Miniature Test Switches Compact and versatile Front- and back-connected styles Safe, durable, rugged and reliable Recognized by CUL & UL Class IE qualified per IEEE Standard 33-1974 DESCRIPTION
More informationGET.64 Interconnection System. RoHS. Ready
GET.64 Interconnection System RoHS Ready TYCO ELECTRONICS GLOBAL AUTOMOTIVE DIVISION THE 5 APPLICATION AREAS 1 INNOVATIVE TECHNOLOGIES Tyco Electronics is the world s largest passive electronic components
More informationLOW POWER AND SIGNAL APPLICATION GUIDE APPLIANCES /// LOW POWER & SIGNAL APPLICATION GUIDE
LOW POWER AND SIGNAL APPLICATION GUIDE MORE SOLUTIONS TE Connectivity s (TE) extensive connector and sensor solutions provide the essential connectivity you need for your daily interactions at home and
More informationDEUTSCH 369 Series PCB-Mount Connectors Compact, Lightweight In-Line and Panel-Mount Connectors for Printed Circuit Board Applications
DEUTSCH 369 Series PCB-Mount Connectors Compact, Lightweight In-Line and Panel-Mount Connectors for Printed Circuit Board Applications DEUTSCH 369 Series PCB-Mount Connectors DEUTSCH 369 Series connectors
More informationW A T L O W. Straight Resistance Wire. Welded End Cap
W A T L O W The versatile Watlow cable heater can be formed to a variety of shapes as dictated by its many applications. Cable heaters are small diameter, high performance units, fully annealed and readily
More informationCATEGORY 6A FTP RJ45 SOLUTION
CATEGORY 6A FTP RJ45 SOLUTION Clipsal titanium Patch Cord Clipsal titanium LSZH Patch Cord Clipsal titanium Keystone Jacks Clipsal titanium Modular Jacks Clipsal titanium Patch Panels Clipsal titanium
More informationHigh Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems)
4 Need more information? all Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in all Tyco Electronics products. They can provide you with: Technical
More informationRugged, compact, lightweight Connectors and cable assemblies. Expertise Reliability Innovation.
Rugged, compact, lightweight Connectors and cable assemblies www.fischerconnectors.com FISCHER ULTIMATE TM KEY FEATURES SERIES DURABILITY Sealing IP68/IP69 even unmated Hermetic Extremely robust mechanical
More informationGuideLine 2. Highly Visible Alignment Lasers for Visually Demanding Surfaces
Highly Visible Alignment Lasers for Visually Demanding Surfaces The Guideline 2 Range The provides a reliable and robust industrial alignment laser for a wide range applications including the alignment
More information.025 Connector Series
Highlights Automotive connector series: 30 % smaller size than the existing.040 III connectors and designed to resist fretting corrosion. Features.025 Connectors with a full range of product lines..025
More informationTILT SENSOR SWITCH. Item No. RBS Description Ball-Contact Version 15 Page 1 of 7 Publish Date May 13, 2018
Item No RBS100600 Description Ball-Contact Version 15 Page 1 of 7 Publish Date May 13, 2018 FUNCTION 25 Tilt Detecting for 4 Directions in horizontal position APPLICATIONS 1 Wake up systems for power saving,
More informationS200 SHIELD TERMINATORS
RAYCHEM S200 SHIELD TERMINATORS FAST, EASY SHIELD TERMINATION AND GROUNDING TO 200 C RAYCHEM S200 SHIELD TERMINATORS High-Performance, High-Temperature Cable Terminators Heat-Shrinkable Sleeve for Fast,
More informationW A T L O W. Straight Resistance Wire. Welded End Cap
W A T L O W The versatile Watlow cable heater can be formed to a variety of shapes as dictated by its many applications. Cable heaters are small diameter, high performance units, fully annealed and readily
More informationRead and Save These Instructions All Hoods Must Be Installed By A Qualified Installer
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS UNDER CABINET HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationProduct Specification JUL07 Rev. F. 1. Scope : 2. Applicable Documents: 3. Requirements : 1 of Contents. 2.1 AMP Specifications :
1. Scope : 1.1 Contents 11JUL07 Rev. F DDR S.O.DIMM Socket 200 Positions This specification covers the requirements for product performance, test methods and quality assurance provisions of DDR S.O.DIMM
More informationIntroducing Inverted SMT Thru Board Connector
Introducing Inverted SMT Thru Inverted SMT Thru KEY FEATURES Available in 2 through 6 positions Eliminates wire dress management issues with discreet wire leads around the surface of the LED pc board Accepts
More informationOne-Touch Locking Style Small Sized Circular Connectors
One-Touch Locking Style Small Sized Circular Connectors Series OUTLINE Waterproof IP 67 Lock Type Push-On series is a small sized waterproof circular connector with push-on locking and turn-off unlocking
More informationTE CONNECTIVITY S CYLINDER HEAD WIRING SOLUTIONS FOR INDUSTRIAL & COMMERCIAL VEHICLES
TE CONNECTIVITY S CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL VEHICLES WE GO TO EXTREMES TO MAKE EVERY CONNECTION COUNT INDUSTRIAL & COMMERCIAL TRANSPORTATION /// CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL
More informationDTS SERIES CONNECTORS
DEUTSCH DTS SERIES CONNECTORS FOR MIL-DTL-38999 SERIES III RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS TE DEUTSCH MIL-DTL-38999 SERIES III CONNECTORS QUICK REFERENCE GUIDE Wide Range Mil spec, commercial,
More informationThermo-Platens. Cast-In Aluminum and Bronze Platen Die Heaters for Plastics Processing Equipment
Cast-In Aluminum and Bronze Platen Die Heaters for Plastics Processing Equipment Cast-In Platen Heaters are widely accepted as the industry standard for heating critical, temperaturesensitive plastics
More informationRugged, compact, lightweight Connectors and cable assemblies. Expertise Reliability Innovation.
Rugged, compact, lightweight Connectors and cable assemblies www.fischerconnectors.com FISCHER ULTIMATE TM KEY FEATURES SERIES DURABILITY Sealing IP68/IP69 even unmated Hermetic Extremely robust mechanical
More informationUSB 3.0 Plug & Receptacle
US 3.0 Plug & Receptacle 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods and quality requirements of Tyco Electronics Universal Serial us (US) consortium
More informationSOLID PLUS HEAT
SOLID PLUS HEAT WWW.ROTAID.COM PRODUCT SHEET The Rotaid Solid Plus Heat is a highly robust and durable AED wall cabinet that ensures a recognizable, solid and sustainable storage of your AED device in
More informationSOLARLOK Interconnection System Installation Manual
SOLARLOK Interconnection System 1. Safety Note! n The SOLARLOK connector is to be used only to interconnect firmly fixed cables. n Do not disconnect under electrical load! n Electrical current path should
More informationIR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam Volts DC - 750/850/940Nm
IR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam - 9-42 Volts DC - 750/850/940Nm Part #: LEDLB-4-IR Buy American Compliant The Larson Electronics LEDLB-4-IR LED Light Bar offers high infrared
More informationNightfall. led emergency egress lighting
Nightfall led emergency egress lighting Nightfall led emergency egress lighting Combining a sleek, architectural, low profile design with high performance makes the Nightfall Series an attractive LED solution
More informationAmphenol LTW Technology Co., Ltd. Amphenol LED Market. Innovation in Waterproof Solution
Amphenol LTW Technology Co., Ltd. Amphenol LED Market http://www.amphenolltw.com Amphenol LTW Our History LTW Technology, established in 1993, is a professional designer and manufacturer of waterproof
More informationFEB. 17 Rev. A1
Product Specification 108-94552 10 FEB. 17 Rev. A1 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity
More informationQuick Reference Guide Barrier Strips
Quick Reference Guide Barrier Strips Barrier strip style terminal blocks from Tyco Electronics are available in 3 main categories: dual-barrier, tri-barrier, and double row. Each category of barrier strip
More informationRead and Save These Instructions All Hoods Must Be Installed By A Qualified Installer
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS WALL MOUNT LINER INSERT Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationMEGAWAT * HIGH DENSITY CARTRIDGE HEATERS
MEGAWAT * HIGH DENSITY CARTRIDGE HEATERS MEGAWAT high-density cartridges are round tubular heaters with electrical terminations on one side. These dependable heaters are made to withstand tough industrial
More informationUSB CONNECTORS MINI USB CONNECTOR & CABLE ESB3,4,5 SERIES. USB CONNECTOR & CABLE ESB0 SERIES (Connector) ESB1 SERIES (Cable)
USB CONNECTORS USB CONNECTORS MINI USB CONNECTOR & CABLE ESB3,4,5 SERIES USB CONNECTOR & CABLE ESB0 SERIES (Connector) ESB1 SERIES (Cable) IEEE1394 CONNECTOR & CABLE ESB6 SERIES (Connector) ESB2 SERIES
More informationSENSOR SWITCH BRAVOTRONICS CORPORATION 松瓚科技股份有限公司. Item No. VBS080100T Description VIBRATION SWITCH Version 8 Page 1 of 10 Date Nov.
Page 1 of 10 Date Nov. 20, 2013 FUNCTIONS Vibration detecting for vertical PCB APPLICATION 1. Wake up systems for power saving, such like remote controllers 2. GPS starting system 3. Alarm system 4. Anti-theft
More informationBAND HEATERS component parts
BAND HEATERS w w w.wat tco.com OVERVIEW WATTCO band heaters are the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. The various
More informationDETAIL SPECIFICATION
INCH-POUND MIL-DTL-38999M 11 February 2015 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, OR BREECH COUPLING), ENVIRONMENT RESISTANT
More informationSENSOR SWITCH. OncQue Corporation 大日科技股份有限公司. Item No. RBS07 Series Description TILT SWITCH Version 13 Page 1 of 16 Date Nov. 04, 2013 FUNCTIONS
Page 1 of 16 Date Nov. 04, 2013 FUNCTIONS 1. 45 Tilt Detecting within a 360 radius 2. 45 Tilt Detecting within a 360 radius with 45 bended leads. 3. Up-Side Down Detecting APPLICATIONS 1. Automatically
More informationAMP SUPERSEAL 1.5 SERIES Connectors
Introduction TE Connectivity has developed the MP SUPERSEL 1.5 SERIES Connector family to meet the increasing requirements for reliability and water proofness. MP SUPERSEL 1.5 SERIES Connector exceed the
More informationTubular Industrial Process
Application Tempco Over-the-Side Immersion Heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, choose a round
More informationCartridge Heaters. Metric FIREROD Cartridge. Applications and Technical Data
W A T L O W The Watlow FIREROD not only set the industry standard for cartridge heaters, it continues making improvements in construction and design. Among those improvements is the metric FIREROD, a variation
More informationCOIL AND CABLE HEATERS. Mightyband Cable Heaters Tempco-Pak Cable Heaters
Mightyband Cable Heaters...5-2 Tempco-Pak Cable Heaters...5-0 Tempco Replacement Heaters for OEM Runnerless Molding Systems...5-4 SECTION COIL AND CABLE HEATERS Design Features Temperatures up to 800 F
More informationGE AIR CONDITIONER ACCESSORIES Split System/Built-In/Window/Zoneline Models
GE AIR CONDITIONER ACCESSORIES Split System/Built-In/Window/Zoneline Models We bring good things to life. SPLIT SYSTEM UNITS RAAS12 Replacement Filters for 9,000 and 12,000 Btu/Hr Units A removable and
More informationSignal Connectors for Topside and Subsea Applications
Signal Connectors for Topside and Subsea Applications Withstand the Hazards of Offshore DEUTSCH signal connectors from TE Connectivity (TE) deliver rugged reliability in challenging and harsh environments
More informationTechnical Specifications
PCT-00 Focused Convection Preheater The PCT-00 is a focused convection preheater that is designed to provide extra heat capacity for demanding applications. Unlike conventional preheaters, the PCT-00 Focused
More informationTE CONNECTIVITY S CYLINDER HEAD WIRING SOLUTIONS FOR INDUSTRIAL & COMMERCIAL VEHICLES WE GO TO EXTREMES TO MAKE EVERY CONNECTION COUNT
TE CONNECTIVITY S CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL VEHICLES WE GO TO EXTREMES TO MAKE EVERY CONNECTION COUNT INDUSTRIAL & COMMERCIAL TRANSPORTATION /// CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL
More informationFSS-SMT Series. Low Profile Force Sensor
FSS-SMT Series Low Profile Force Sensor DESCRIPTION Honeywell s FSS-SMT Series force sensors are designed to be one of the most reliable force sensors available as illustrated by 20 million Mean Cycles
More informationQuick Reference Guide: Connectors for Mobile Devices
Quick Reference Guide: Connectors for Mobile evices Tyco Electronics supplies a unique expertise for today's and tomorrow's mobile equipment applications, including cellular phones, mobile media players,
More informationCII FCAC-150 Series Relay
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts KEY FEATURES Non-latching relay Balanced force design Corrosion protected metal enclosure
More informationhttps://www.te.com/commerce/pcnws/pcnforms?pcndate=03-jul-2012&...
Page 1 of 12 CURRENT DATE: 28-JANUARY-2014 TE CONNECTIVITY PRODUCT CHANGE NOTIFICATION NO: E-12-011457 PCN DATE: 03-JUL-2012 PRODUCT CHANGE NOTIFICATION We would like to inform you about the following
More informationDETAIL SPECIFICATION
INCH - POUND MIL-DTL-38999L 10 May 2012 SUPERSEDING SUPPLEMENT 1 30 May 2008 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH
More informationThe open-collector sinking output voltage is easily interfaced with a wide variety of electronic circuits.
DESCRIPTION The SS41F/SS41G Series are small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, and are designed to respond to alternating
More informationTE Connectivity's AMP NETCONNECT Cable Management
One of the major challenges facing cabling mounting holes installers and maintenance personnel is organizing distribution cables and patch cords in the telecommunications room. TE Connectivity's AMP NETCONNECT
More informationSpecification Status: Released
PAGE NO.: Page 1 of 5 Specification Status: Released BENEFITS Silicon ESD device in an EIA-0402 size rectangular passive component SMT package Standard PCB assembly and rework processes Bi-directional
More informationHeat on. Air heaters. Blowers. from 400 Watt to Watt. from 1,45 m 3 /min to 16,5 m 3 /min
Heat on Air heaters from 400 Watt to 17 400 Watt Blowers from 1,45 m 3 /min to 16,5 m 3 /min BAK Thermoplastic Need-to-know Calculation of air heaters 1. Heat requirement calculation Formula: Q = m * c
More informationCircular Robotic Connectors
In the frame of Space Station Alpha program, SOURIAU has developed and qualified a series of Quick Disconnect high reliability circular connector for robotic operations. This hardware is used as ORU interface
More informationKey Features & Benefits w Digital display for repeatable w Automatic control of the preheater for w Easy profile creation for operator
MRS-00A Modular Rework System The MRS-00A Modular Rework System is an integrated convection rework system for the removal and reflow of BGA/CSP and SMT components. The MRS-00A is comprised of a convection
More informationonlinecomponents.com
SIMEZE Terminals 28 Product Facts Terminates all copper magnet wire film insulations Eliminates need for prestripping conductors Moving Beam contact design connects a wide range of magnet wire sizes with
More informationFeatures TREASURE HUNTER S CODE OF ETHICS
63-3013.fm Page 3 Wednesday, July 26, 2000 9:42 AM ˆ Features With your Famous Trails Metal Detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. The Metal Detector is
More informationLED Light Emitter - 7, 3-Watt CREE LEDs Lumens Volts
LED Light Emitter - 7, 3-Watt CREE LEDs - 1750 Lumens - 9-32 Volts Part #: LEDLB-21-3C Page: 1 Buy American Compliant The Larson Electronics LEDLB-21-3C LED Light Bar offers high light output in a light
More informationUniversal Retention Modules 02 MAR 10 Rev A
NOTE i Application Specification 114-26017 Universal Retention Modules 02 MAR 10 Rev A All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationHARTING Han M23 Circular Connectors
HARTING Han M23 Circular Connectors Han M23 circular connectors Contents Page Overview Features....02 Approvals....02 Technical characteristics....03 Hoods and housings Hoods....04 Bulkhead mounted housings....06
More informationLow Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer C1D1 - C2D2 - ISO 14644/FS-209E
Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer - 140 - C1D1 - C2D2 - ISO 14644/FS-209E Part #: HALD-24-1X150LED-V2-140DB Page: 1 Made in the USA The HALD-24-1X150LED-V2-140DB from Larson Electronics
More informationSPECIFICATION AND PERFORMANCE MDP CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE OF MDP CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 of 16 CLAUSE CONTENTS PAGE 1.0 SCOPE... 3 2.0 APPLICABLE DOCUMENTS... 3 3.0
More informationAXICOM Telecom-, Signal and RF Relays. Cradle Relay Accessories and Mounting Nov. 07 Rev. C ECOC: JM10
Cradle Relay Accessories and Mounting 108-98016 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet,
More informationINSTALLATION INSTRUCTIONS AH12 WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS AH12 WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationMineral Insulated Band Heater
The MI band heater is a high-performance heater. Its performance and name are derived from exclusive mineral insulation a material with much higher thermal conductivity than mica and hard ceramic insulators
More informationMICRO SWITCH Basic Switches Line Guide
MICRO SWITCH Basic Switches Line Guide The switch is on. Simple, superior, durable, and irreplaceable even by 21st-century standards, the MICRO SWITCH technology cycles on. Today, Honeywell Sensing and
More informationOil Streak Streak Sensing Unit
Oil Streak Streak Sensing Unit GENERAL The Streak Sensing Unit system detects and monitors lubrication for high-speed spindles and other applications requiring accurate oil deliveries. The Streak Sensing
More informationType 2 Series Portable Electrode Stabilization Ovens
OPERATING INSTRUCTIONS Type 2 Series Portable Electrode Stabilization Ovens PART # DESCRIPTION (All 50-60 Cycles) TEMP RANGE** INSULATION CHAMBER SIZE CAPACITY WEIGHT & DIMENSIONS Type 2 Series Ovens 1205512
More informationHigh Voltage Lead Assemblies and Receptacles
C Series GENERAL SPECIFICATIONS For Limited Military/Aerospace Applications C Series In 1997, Reynolds Industries, Inc. acquired the RLA series and other connector product lines from Rowe Industries, Inc.
More informationMiniature Low Pressure Sensors. 24PC Series, Uncompensated/Unamplified 0.5 psi to 250 psi. Datasheet
Miniature Low Pressure Sensors 24PC Series, Uncompensated/Unamplified 0.5 psi to 250 psi Datasheet Miniature Low Pressure Sensors The 24PC Series Miniature Pressure Sensors are small, cost-effective devices
More informationSMART Dust Sensor. Amphenol Advanced Sensors SM-PWM-01C. Application Note. Features
Application Note SMART Dust Sensor SM-PWM-01C SM-PWM-01C dust sensor detects dust particle concentration in air by using an optical sensing method. An infrared light emitting diode (IR LED) and a photo-sensor
More informationMulti Layer Varistor Overvoltage Protection Device
GENERAL DESCRIPTION PAGE NO.: 1 OF 5 These s are small, leadless, surface mount packages made of multiple layers of Zinc Oxide, with electrodes between them. They are used to help protect integrated circuits
More informationManifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4
N1 Aftermarket Hot Runner Parts & Services: Manifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4 Aftermarket Hot Runner Replacement Parts: Axial Clamp Heaters...N9
More informationConnect - Contact - Control. Air and water heaters for rail vehicles Ø22. F 195.en
Connect - Contact - Control Air and water heaters for rail vehicles 21 0 60 60 0 0 R 90 F 19.en 2 Heaters for rail vehicles Development and manufacture of heaters for rail vehicles has a tradition for
More information