CERTIFICATE. AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen ISO 9001:2008
|
|
- Lambert Andrews
- 6 years ago
- Views:
Transcription
1 CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen has established and applies a Quality Management System for Contract manufacturing according to customer specifications, control of the production of photovoltaic modules by international manufacturing companies according to defined product specifications and distribution of such photovoltaic modules. (EA Code 19) An audit was performed, Report No Proof has been furnished that the requirements according to ISO 9001:2008 are fulfilled. The certificate is valid until Certificate Registration No TMS Munich, QMS-TGA-ZM-07-92
2 CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen has established and applies a Environmental and Safety Management System for the following scope of application: Contract manufacturing according to customer specifications, control of the production of photovoltaic modules by international manufacturing companies according to defined product specifications and distribution of such photovoltaic modules. (EA Code 19) Performance of audits (Report-No ) has furnished proof that the requirements under: ISO 14001:2004 BS OHSAS 18001:2007 are fulfilled. This certificate is valid until Certificate Registration No / TMS Munich, TGA-ZM-07-92
3 Client: Axitec Solar GmbH Otto Lilienthal-Str Böblingen Consultants: PI Photovoltaik-Institut Berlin AG Wrangelstraße Berlin Berlin, Declaration We hereby confirm that Axitec Solar GmbH has assigned (Offer No.: ; Order No.: ) PI Photovoltaik-Institut Berlin AG to perform the Salt Mist Corrosion Test according to IEC Ed.2 (incl. IEC Test Kb: Salt Mist, Cyclic, Severity Level 5) on two modules (AC-236P/156-60S, SN1: , SN2: ). The Salt Mist Corrosion Test itself was subcontracted to TechnoLab GmbH, the pretests and the additional tests were performed at PI Photovoltaik-Institut Berlin AG. After the Salt Mist Corrosion Test there were no visual defects and the degradation of power was less than the requirement of the standard of -5%. The insulation tests met the requirements of the standard and the Bypass Diode Functionality Test was passed as well. The modules passed the Salt Mist Corrosion Test according to the standard. The following module types are covered by the test: AC-xxxP/156-60S xxx = 212W p -260W p Dipl.-Ing. Alexander Drobisch Dipl.-Ing. (FH) Michael Schoppa PI Photovoltaik-Institut Berlin AG PV Module technology Testing Consulting Development Research Wrangelstr Berlin Company site: Berlin Trade register: Amtsgericht Charlottenburg Nr. HRB B Managing board: Dr. Paul Grunow, Prof. Dr. Stefan Krauter, Dipl.-Ing. Sven Lehmann Head of Supervisory board: Prof. Dr. Rolf Hanitsch Phone: Fax: VAT No.: DE Swift-BIC: DRES DE FF 100 IBAN: DE Bank account: Commerzbank AG BLZ: Account:
4 Number KIP /01 Replaces - Issued Scope PV Certification Expiry Date Contract number - Test Report Nr Page 1 of 1 Type Testing Certificate Photovoltaic (PV) Panels Kiwa hereby declares that the Photovoltaic Panels: Manufactured by: Axitec GmbH Otto-Lilienthal-Straße 5, D Böblingen, Models: AC-245P/156-60S Extended Models: AC-XXXM/156-72S; AC-XXXM/156-60S; AC-XXXM/156-54S; AC-XXXM/125-72S; AC-XXXP/156-72S; AC-XXXP/156-60S; AC-XXXM/156-54S. (XXX suffix indicates rated power) Comply with the type testing according to the following standards: IEC Ed.1 Draft C: April 2011 Ammonia corrosion testing of photovoltaic (PV) modules This type testing certificate is only valid for the sample tested by the test laboratory and is not valid for any other (production) sample. Furthermore this type testing certificate does not include: - the Initial and the Periodic Inspection of the Factory site(s) Test results are reported in the test report nr. AR 13 TEST 001 issued by our appointed laboratory Albarubens S.r.l. Publication of the certificate is allowed Kiwa Italia S.p.a. Sede Legale: Via Goffredo Mameli, Milano Sede Amministrativa e operativa: Via Treviso, 32/ San Vendemiano (TV) Bouke Meekma Kiwa
5 Brussels, PV CYCLE Association a.i.s.b.l. declares hereby that based on current commitments Axitec GmbH is member of PV CYCLE a.i.s.b.l., which organizes the take-back and recycling of photovoltaic module waste in Europe*. This certificate is valid until PV CYCLE a.i.s.b.l. is registered with BE Jan Clyncke Managing Director Membership reference N F * Except Italy. Only PV CYCLE Italia SrL can issue certificates for take-back and recycling in Italy.
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationD Mainz Offenbach,
VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut GmbH Merianstraße 28 D-63069 Offenbach Dr. Thomas Block Product Manager Strategy and Business Development SCHOTT Solar AG Hattenbergstr.
More informationAGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al
Tiff NOCE) ) Component Certificate DEW A/S Frisenborgvej 33 7800 Skive, Danemark Type of unit Protection device Description of unit AGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al Technical data Measuring
More informationPage 2 of 14 Report Ref. No
age 2 of 14 Summary of testing: Tests performed (name of test and test clause): Clause 6.1, Initial measurements: - MST 01: Visual inspection - 10.2: Maximum power determination - MST 16: Dielectric withstand
More informationÜberwachte Fertigungsstätte
Überwachte Fertigungsstätte Approved Place of Manufacture Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Fertigungsstättennummer: 30017172 Die Überwachung der Fertigungsstätte
More informationManual OW Caution:
Caution: Warning: This manual should be fully read and understood before starting installation! Power supply 230 V 50/60 Hz! Run cooling unit always with correct oil level otherwise damage of pump may
More informationClassification Report Reaction to fire of building elements DIN EN :2007. Class E
Classification Report Reaction to fire of building elements 10-001641-KB02-K06-01-e-01 Translation of Classification report 10-001641- KB02-K06-01-de-01 dated 16. May 2011 Client Deventer Profielen CV
More informationDEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)
STAATSKOERANT, 19 NOVEMBER 2010 No.33763 11 No. R. 1072 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID 19 November 2010 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62941 Edition 1.0 2016-01 Terrestrial photovoltaic (PV) modules Guidelines for increased confidence in PV module design qualification and type approval INTERNATIONAL ELECTROTECHNICAL
More informationTFI Report Classification
TFI Report Classification of the Reaction to Fire according to EN 13501-1:2010 Customer Stuttgarter Straße 75 74321 Bietigheim-Bissingen GERMANY Product resilient floor covering Product 1: Scala 55 Connect
More informationTest Report No
TFI Charlottenburger Allee 41 52068 Aachen Germany Charlottenburger Allee 41 52068 Aachen Germany Egetaepper A/S Postfach 190 7400 Herning DÄNEMARK Fon +49.241.9679 00 Fax +49.241.9679 200 postmaster@tfi-online.de
More informationYour reference Your message dated Our reference Braunschweig, Mat / Bön 8 April 2016
Fraunhofer WilhelmKlauditzInstitut Bienroder Weg 54 E 38108 Braunschweig Germany LV1016 Riga Fraunhofer Institute for Wood Research WilhelmKlauditzInstitut WKI Director Prof. Dr.Ing. Bohumil Kasal Head
More informationFire Risks and Safety Standards
Fire Risks and Safety Standards Florian Reil TÜV Rheinland Group Renewable Energies 51105 Cologne, Germany Phone: + 49 221 806 27 94 Email: Florian.Reil@de.tuv.com Workshop BIPV The Increasing Role of
More informationCERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh
CERTIFICATE Conformity of the Factory Production Control 0035-CPR-1090-1.00794.TÜVRh.2017.003 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the
More informationAcoustic Verification Report
Acoustic Verification Report Invacare XPO 2 Portable Oxygen Concentrator Type XPO100B-EU for Date: 2013-12-10 Our reference: IS-ATC2-MUC/js Document: Report Invacare VR.600010074.002.12 - Revision 2.docx
More informationCERTIFICATE. OSRAM GmbH Marcel-Breuer-Straße München Germany ISO 14001:2015
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Marcel-Breuer-Straße 6 80807 München including the sites and scope of application see enclosure has established and
More informationOperating instructions
Operating instructions Cleaning kit 4 LogoTowel plastic Copyright Logopak Systeme GmbH & Co. KG. All rights reserved. Status May 2015 RK Logopak Systeme GmbH & Co. KG Dorfstraße 40, 24628 Hartenholm Register-Gericht
More informationGASTEC QA. Approval Requirements 31-2
KE 31-2 March 2012 GASTEC QA Approval Requirements 31-2 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationsafety requirements are to comply with this compulsory specification twelve (12) months after the publication of this notice.
28 No. 38232 GOVERNMENT GAZETTE, 28 NOVEMBER 2014 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID No. 944 28 November 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act
More informationTFI Report Classification
TFI Report Classification of the Reaction to Fire according to EN 13501-1:2010 Customer Unilin bvba, Division Flooring Ooigemstraat 3 8710 Wielsbeke BELGIUM Product wall covering Wall covering This report
More informationGASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
More informationQuality assurance and safety aspects. Dipl.Ing. Udo Siegfriedt DGS-Berlin Brandenburg
for small PV installations Dipl.Ing. Udo Siegfriedt DGS-Berlin Brandenburg Introduction DGS Germanys first non profit association aiming a renewable and environmental friendly energy supply. Founded in1975
More informationCertification Report of the ST3000 Pressure Transmitter
Certification Report of the ST3000 Pressure Transmitter Revision No.: 1.0 Date: Report Number: Product: Customer: Order Number: Authority: Responsible: 2006-Dec-12 SAS-128/2006T ST3000 Pressure Transmitter
More informationR E P O R T D I N E N
R E P O R T W R G 3 9 6 D I N E N 1 3 1 4 1-7 Test laboratory Test object Customer Scope of assignment TÜV SÜD Industrie Service GmbH Center of Competence for Refrigeration and Air Conditioning Air Conditioning
More information54. IWK Internationales Wissenschaftliches Kolloquium International Scientific Colloquium
07-10 September 2009 PROCEEDINGS 54. IWK Internationales Wissenschaftliches Kolloquium International Scientific Colloquium Information Technology and Electrical Engineering - Devices and Systems, Materials
More informationOperating instructions Cleaning kit 2 LogoClean plastic
Operating instructions Cleaning kit 2 LogoClean plastic Copyright Logopak Systeme GmbH & Co. KG. All rights reserved. Status May 2015 RK Logopak Systeme GmbH & Co. KG Dorfstraße 40, 24628 Hartenholm Register-Gericht
More informationX-LINE. Photovoltaic high-performance modules. monocrystalline and polycrystalline
V1 2018 y e a r s 15 w a r r a n t y X-LINE Photovoltaic high-performance modules monocrystalline and polycrystalline 2018 15 years manufacturer s warranty Fire reaction class 1 EXE SOLAR Guarantee MODULAR
More informationCERTIFICATE of QUALITY TEST
Testing laboratory for climatic, mechanical and corrosive environmental stress CERTIFICATE of QUALITY TEST Test report - No. 10142 / 13 Client ADDI-DATA GmbH Airpark Business Center Airport Boulevard B210
More informationThe Solar O&M Best Practices Mark
The Solar O&M Best Practices Mark A self-certification-based label to promote transparency and excellence in solar O&M Paolo V. Chiantore Chair of the SolarPower Europe O&M Task Force Managing Director,
More informationTesting and certification services for solar products
Testing and certification services for solar products Solar and Renewable Energy sector Kiwa Italia Group Solar PV Testing and Certification Kiwa operates as an internationally recognized Notified Body
More informationGASTEC QA. Evaluation Guideline KE 191. Amendment A1 Excess flow valves. KE A1 March 2012
KE 191 - A1 March 2012 GASTEC QA Evaluation Guideline KE 191 Amendment A1 Excess flow valves Foreword and introduction These GASTEC QA Approval requirements amendment have been accepted by the Board of
More informationGASTEC QA. Approval Requirements 31-1
KE 31-1 March 2012 GASTEC QA Approval Requirements 31-1 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : inks and specialty chemicals for the printing
More informationIECEx Certificate of Conformity
Page 1 of 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:1 Status: Current Certificate
More informationCERTIFICATE. Renesas Semiconductor Package & Test Solutions Co., Ltd. Oita Factory 4200 Idoda, Nakatsu-shi, Oita Japan
CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has
More informationCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Occupational Health and Safety Management System. Scope: Development, production
More informationSmoke and heat control systems - Part 10: Power supplies EN Classification according to operational and environmental class
Smoke and heat control systems - Part 10: Power supplies EN 12101-10 Classification according to operational and environmental class I.F.I. Institut für Industrieaerodynamik GmbH Welkenrather Straße 120
More informationDo you manufacture equipment or protective systems for use in potentially explosive atmospheres? Do you process, trade or import them?
TÜV NORD CERT GmbH Geschäftsstelle Hannover Am TÜV 1 30519 Hannover Zertifizierung Certification body for equipment according to Directive 94/9/EC of TÜV NORD CERT GmbH Summarized Information Directive
More informationConformity assessment procedures for the Alarm Components Scheme
Conformity assessment procedures for the Alarm RD_070, Issue 20 This guide describes the conformity assessment procedures for Alarm Components. This Alarm certifies that Alarm Components comply with technical
More informationCERTIFICATE. Scope: The design and manufacture of semiconductor devices.
CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-52 Edition 3.0 2017-11 Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 19.040
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61215 Second edition 2005-04 Crystalline silicon terrestrial photovoltaic (PV) modules Design qualification and type approval This English-language version is derived from the
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More informationCERTIFICATE. für die überwachte Fertigungsstätte for the approved factory. Bisol Proizvodnja d.o.o Latkova vas 59a 3312 Prebold Slovenia
ÖSTERREICHISCHER VERBAND FÜR ELEKTROTECHNIK 1010 Wien, Eschenbachgasse 9 ZVR: 327279890 DVR: 1055887 Prüfwesen & Zertifizierung Kahlenberger Str. 2A 1190 Wien, Österreich Telefon: +43 1 370 58 06 Telefax:+43
More informationManagement Systems Certification Ltd
Management Systems Certification Ltd 48 South Street, New Ross, Co. Wexford Management Systems Certification Body Registration number: 5011 is accredited by the Irish National Board (INAB) to undertake
More informationSupplementary Installation and Operating Instructions. Category II2G
Supplementary Installation and Operating Instructions Flap-type Flow Meter Category II2G 2 Contents 1. General safety directions...3 2. Main safety-relevant characteristics...4 2.1. Category / Zone...4
More informationGASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
More informationUpdate on the new IEC standards and their impact on quality of PV modules
1 Update on the new IEC standards and their impact on quality of PV modules Review of the major changes in the last editions of the standards series IEC 61215 - Terrestrial photovoltaic (PV) modules Design
More informationEuropean Technical Assessment. ETA-17/0624 of 8 September English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-17/0624 of 8 September 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationAll following documents were translated from the original german document, which can be found in our system overview or on our website. http://www.flamro.com In case of doubt the german version is valid
More informationCONTRACT AGREEMENT FOR THE MAINTENANCE SERVICE AND INVERTER WARRANTY UP TO 20 YEARS (so-called Super Service Contract)
GENERAL BUILDING SpA Capitale sociale 1.000.000,00 Sede e stabilimento: Via Roncolina, 3-60020 POLVERIGI (AN) Contatti: Tel 071 9090261 Fax 071 9090714 Web www.fotovoltaici.org CONTRACT AGREEMENT FOR THE
More informationEuropean Technical Assessment. ETA-05/0069 of 3 July English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-05/0069 of 3 July 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationinnovation in LED lighting High power LED Fixtures for outdoor applications and large areas lighting
innovation in LED lighting High power LED Fixtures for outdoor applications and large areas lighting Why Niteko? Niteko designs and produces LED luminaires, with latest Italian technology, for public,
More informationThe Power of the Market Energy procurement by METRO Group in international markets - Requirements for the Polish energy market
The Power of the Market Energy procurement by METRO Group in international markets - Requirements for the Polish energy market Warsaw, 30 September 2009 Olaf Schulze Member of the Management Board MEM
More informationThe New PPE Regulation (EU) 2016/425
The New PPE Regulation (EU) 2016/425 Dave Tuplin Certification Manager, BSI 1 PPE Regulation (EU) 2016/425 changes Agenda Who is BSI Landscape and timeframes Scope of the new PPE Regulation Categorisation
More informationfrom ENGINEERING up to the complete PLANT, ALL from a single SOURCE MULTI Kühlsysteme GmbH Zschorlauer Straße Aue/Saxony GERMANY
from ENGINEERING up to the complete PLANT, ALL from a single SOURCE Location Company building Multi Kühlsysteme GmbH Zschorlauer Strasse 56 D-08280 Aue / Saxony GERMANY Phone: + 49 3771 24 67 0 Telefax:
More informationGASTEC QA. Approval Requirements 15. for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas. KE 15 January 2012
KE 15 January 2012 GASTEC QA Approval Requirements 15 for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas Foreword These GASTEC QA Approval requirements have been
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationCEN standardization work on refrigerating systems, especially standard EN 378
CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de
More informationAC THOR. Assembly Instructions
AC THOR Photovoltaic-Power-Manager for hot water and space heating Assembly Instructions The Operation Manual of the device is available at www.my-pv.com. The following device key is required for online
More informationReport VNLF Test Report
Report VNLF 081158.1 Test Report Applicant KLEEN-TEX Industries in Europa GmbH Münchner Straße 21 6330-Kufstein Austria Reference Mrs. Antje Schlegel Application Determination ofthe burning behaviour according
More informationGASTEC QA. Approval Requirements 6
KE 6 March 2012 GASTEC QA Approval Requirements 6 for the GASTEC QA product certificate for Plumbing fittings with ends for capillar soldering and/or thread connections Foreword These GASTEC QA Approval
More informationAchieve Success with European Medical Device Commercialization. By Russ King
Achieve Success with European Medical Device Commercialization By Russ King Achieve Success with European Medical Device Commercialization Given the complexity of the FDA s regulatory pathway, many medical
More informationElectromagnetic Compatibility of Alarm Systems
Electromagnetic Compatibility of Alarm Systems Jan VALOUCH Tomas Bata University in Zlin, Faculty of Applied Informatics, Nad Stráněmi 4511, 76005, Zlín, Czech Republic valouch@fai.utb.cz. Abstract. Alarm
More informationProcedure for the Approval of New Fire Detection and Alarm Technologies
VdS Guidelines for Automatic Fire Detection and Fire Alarm Systems VdS 3469en Procedure for the Approval of New Fire Detection and Alarm Technologies VdS 3469en : 2016-01 (01) Publisher and publishing
More informationincluding the locations according to annex
Certificate Certificate Holder: Siemens Factory Automation Engineering Ltd. Registration Address: No. 1, Jiuxianqiao East Rd., Chaoyang Operation Address: Building A1, No. 9, Jiuxianqiao East Rd., Chaoyang
More informationAssessment Report Construction Product Regulation* * CPR - REGULATION (EU) No 305/2011
* CPR - REGULATION (EU) No 305/20 Telefoon +3 (0) 70 4 44 400 Fax +3 (0) 70 4 44 420 Internet www.kiwa.com. plan ) Goal: Assessment and verification of the constancy of performance of the products as described
More informationCERTIFICATE. Scope: The design and manufacture of semiconductor devices.
CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has
More informationChief Operating Officer Giampiero Belcredi
CONTENTS 1. PURPOSE AND SCOPE 2. GENERAL PRINCIPLES AND GUARANTEES FOR THE CLIENT 3. ACCESS REQUIREMENTS FOR CERTIFICATION 4. ASSESSMENT PROCESS REQUIREMENTS 5. SUSPENSION AND REVOCATION OF THE CERTIFICATION
More informationCONFIRMATION of Product Conformity (QAL1)
CONFIRMATION of Product Conformity (QAL1) AMS designation: Manufacturer: Test Laboratory: Fidas 200 S, Fidas 200 and Fidas 200 E for suspended particulate matter PM 10 and PM 2,5 PALAS GmbH Greschbachstraße
More informationAPPLICATION FOR THE CERTIFICATION/ ASSESSMENT OF A MANAGEMENT SYSTEM C C C
C C C CYPRUS CERTIFICATION COMPANY Α. COMPANY INFORMATION COMPANY NAME: (in Greek) (in English)......... Company Registration Number:.... COMPANY ADDRESS: (in Greek).... (in English)..... CITY: Post Code:..
More informationAutomation, Software und Informationstechnologie
Automation, Software und Informationstechnologie Report on the type approval of the Adjustable Frequency AC Drives PowerFlex 753 and 755 of Rockwell Automation Inc. Bericht-Nr.: 968/EZ 334.00/08 Datum:
More informationKNOW HOW. Technological excellence and application know-how embody the spirit of ReeR Safety Division.
KNOW HOW Technological excellence and application know-how embody the spirit of ReeR Safety Division. 14% of the personnel is employed in the R&D department, with expertise in safety hardware, software
More informationIECRE OPERATIONAL DOCUMENT
IECRE OD-401 IECRE OPERATIONAL DOCUMENT Edition 4.0 2019-01-28 Deleted: 3 Deleted: 05 Deleted: 10 IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications
More informationAbu Dhabi Conformity Assessment Scheme for Small-scale Solar Photovoltaic Systems
Abu Dhabi Conformity Assessment Scheme for Small-scale Solar Photovoltaic Systems Page i TABLE OF CONTENTS DEFINITIONS... 1 1 ABOUT THE ABU DHABI QUALITY AND CONFORMITY COUNCIL... 3 2 FOREWORD... 3 3
More informationThird Party Certification:
Third Party Certification: What does it mean for businesses? Introduction If you work in any part of the fire safety industry you will at least have heard of Third Party Certification (TPC) but you may
More informationGASTEC QA. Approval Requirements 136
KE 136 January 2012 GASTEC QA Approval Requirements 136 for the GASTEC QA product certificate for Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels Foreword These GASTEC
More informationCTS Your Partner for Customised Technical Solutions
How to find us: Karlsruhe Stuttgart A 8 München Exit Empfingen A 81 Haigerloch B 32 B 27 Exit Bodelshausen Rangendingen Tübingen Exit Hechingen Nord Haigerloch Hechingen Singen B 27 Rottweil Balingen Lotzenäcker
More informationBRL-K14008/ Evaluation guideline. for the Kiwa product certificate for Cartridges to be used for sanitary tapware: Mechanical mixers
01-02-2012 Evaluation guideline for the Kiwa product certificate for Cartridges to be used for sanitary tapware: Mechanical mixers Preface This evaluation guideline has been accepted by the board of experts
More informationRules for Intruder Alarm Systems
Rules for Intruder Alarm Systems Opening detectors (Magnetic contacts) Part 1: Requirements VdS 2120en 03/96 (03) Subject 44 1 General; 2 Terms and definitions; 3 Classification 1 General 1.1 Scope These
More informationKB 3030B. Operating Instructions. Before first use of the unit read these operating instructions and act in accordance with them.
KB 3030B Operating Instructions Before first use of the unit read these operating instructions and act in accordance with them. 5.961-751 F2012318 12/05 2 Dear Customer, Please read and comply with these
More information~~oeti. Report VN71 O Classification Report. Reference
~~oeti Report VN71 O 137840.3 Classification Report Applicant EGETAEPPER NS lndustrivej Nord 25 7400-Herning Denmark Reference Lenette Ormstrup Application Classification of burning behaviour according
More informationFUNCTIONAL SAFETY OF ELECTRICAL INSTALLATIONS IN INDUSTRIAL PLANTS BY OTTO WALCH
FUNCTIONAL SAFETY OF ELECTRICAL INSTALLATIONS IN INDUSTRIAL PLANTS BY OTTO WALCH Troublefree and safe operation of industrial systems is of great importance, not only for the safety of the systems and
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements
More informationPath into a green future
Path into a green future Natural cooling in the food and retail industry Thursday, June 23 rd, 2016 13:30 17:30 Friday, June 24 th, 2016 09:30 15:00 Klostergut Paradies, Klostergutstrasse 4 CH-8252 Schlatt
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62561-1 Edition 1.0 2012-02 Lightning protection system components (LPSC) Part 1: Requirements for connection components INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate number: 0000028733_01 Certified AMS: Manufacturer: SWAM 5a Dual Channel Monitor for PMio and PM2,5 FAl lnstruments s.r.l.
More informationDRAFT TANZANIA STANDARD
EEDC 4 (5157) P3 IEC 62599-1: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems Part 1: Environmental test methods TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 0 National
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
More informationDECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0021 EN 1. Unique identification code of the product-type: Rebar connection with fischer injection mortar FIS EM 2. Intended use/es: Product Mortar for post-installed rebar
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15374 August 2005 AGREEMENT ICS 37.100.01 English version Security Management System for suppliers to secure printing industry This CEN Workshop Agreement has been drafted and approved
More informationType approval qualification of Photovoltaic Modules Procedures and test experiences
Type approval qualification of Photovoltaic Modules Procedures and test experiences We Advise. Develop. Facilitate. Inspect. Certificate. Precisely Right. For You. 1 Type approval qualification of Photovoltaic
More informationCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Design, engineering, manufacturing and sales
More informationTrade name of the construction product Würth concrete screw W-BS 5 and W-BS 6. This version replaces ETA-16/0128 issued on 10 May 2016
European Technical Assessment ETA-16/0128 of 23 October 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Deutsches Institut für
More informationMULTI-MONTI. European Technical Assessment ETA-05/0011. Concrete screw made of stainless steel for use in concrete
MULTI-MONTI European Technical Assessment ETA-05/0011 Concrete screw made of stainless steel for use in concrete European Technical Assessment ETA-05/0011 of 4 September 2018 - Original version in German
More informationPHOTOVOLTAIC SYSTEMS
PHOTOVOLTAIC SYSTEMS EUROPEAN PERSPECTIVE Marc Van de Velde Vice President Centre of Excellence Property Risk Engineering / GAPS NFPA Conference April 2016, Munich - Germany Objectives Introduction Cells,
More informationEquipment specifications (D6)
Equipment specifications (D6) This report has been produced for the Cyprus Research Promotion Foundation in fulfilment of deliverable number D6 of the project Advanced Photovoltaics Research and Testing
More informationUpdated 04/07/2017 Page 1/8
FLOW METER S.p.A. Capitale Sociale: 234.000 int. versato Sede legale: Via del Lino, 6 24040 LEVATE (Bg) Amministrazione e Stabilimenti: Via del Lino, 6-24040 LEVATE (Bg) Tel. +39/035/594047 - Telefax +39/035/594821
More informationCompression Sprayers TECH DATA SHEET /03/17. Ersatzteile Spare Parts Pièces de Rechange
10/0/1 TECH DATA SHEET 01 Compression Sprayers Ersatzteile Spare Parts Pièces de Rechange Reserve-onderdelen Piezas de repuesto Pezzi di ricambio FERROX PLUS 55P INOX PLUS 55P FERROX PLUS 585P INOX PLUS
More informationTechnical Report. NFPA 79 Listing
Technical Report for NFPA 79 Listing of the Safety Contractor SIRIUS 3RT1 Applicant Siemens AG Werner-von-Siemens-Str. 48 D-92224 Amberg Germany Manufacturer Siemens AG Werner-von-Siemens-Str. 48 D-92224
More information