ad notam MOUNTING SYSTEM FOR RECESSED IN-WALL APPLICATION
|
|
- Emmeline Beasley
- 5 years ago
- Views:
Transcription
1 ad notam MOUNTING SYSTEM FOR RECESSED IN-WALL APPLICATION Art.No. RM_GM_150 applicable for installations up to 17.5kg VERY IMPORTANT NOTE NEVER USE MORE THAN ONE SET ON ONE GLASS! INSTALLATION GUIDE
2 FOR YOUR SAFETY Please read all safety information thoroughly before using the product. Not complying with the instructions provided within this installation guide may result in severe injuries or life-threatening situations and/or damage respectively change the product. Please comply accurately with all warning instructions to ensure proper operation of the product. Copyright 201 by ad notam. All Rights Reserved. All brand names, product names and/or trademarks are the property of their respective owners. This manual, as a whole, in part or excerpts, may not be reproduced, copied, stored in a data retrieval system or transferred electronically, mechanically or in any other way, shape or form without prior written authorization by ad notam. Specifications of the ad notam products are subject to unannounced changes; this manual may thus not reflect the current technical status.
3 CONTENTS PACKAGE INCLUDES...4 DESCRIPTION...5 SAFETY INSTRUCTIONS...6 PREPARATION...7 ASSEMBLY...9 MOUNTING...11
4 PACKAGE INCLUDES Thank you for choosing an ad notam product. Before using the mounting system please check the following contents of the box for completeness: RM_GM_150 Description Illustration Amount in-wall bracket dimensions: 150 x 0 x 12mm glass angle, self-adhesive counterpart for the in-wall bracket dimensions: 150 x 50 x 14mm (may be pre-installed on glass) in-wall magnet holder dimensions: 150 x 6 x 55mm magnet to be mounted on in-wall magnet holder with countersunk bolt and nut dimensions: 45 x 45 x 12mm glass metal plate, self-adhesive counterpart for the magnet dimensions: 70 x 70 x 1mm (may be pre-installed on glass) plastic spacer only required for flush installation dimensions: 150 x 0 x 10mm screws screw anchors countersunk bolts hexagonal nuts
5 DESCRIPTION The ad notam mounting system for recessed in-wall application is designed to integrate a glass panel (with or without a combined monitor system) into a niche in the wall and is qualified even for installations in damp locations. It combines a mechanical suspension mechanism at the lower edge and magnetic elements at the upper edge in order to allow for easy access to the niche later on for the purpose of maintenance and/or service. There are basically two options of in-wall application, depending on whether you want to install the glass panel flush with the wall or overlapping. 1. GLASS FLUSH WITH THE WALL If you want to install the glass flush with the wall, the niche needs to be created to fit and embed the monitor system, the mounting system and the glass panel. 2. GLASS OVERLAPPING THE NICHE If you want to install the glass overlapping, the niche needs to be created to fit and embed only the monitor system and the mounting system, while the glass surface is overlapping the niche in the wall. 5
6 SAFETY INSTRUCTIONS SAFETY INSTRUCTION REGARDING GLASS SURFACE PREPARATION The glass surface must be clean and dry. Contaminated surfaces should be cleaned with ad notam s preferred solvent. A clean lint-free cloth should be used. Use proper safety precautions for handling solvent. SAFETY INSTRUCTION REGARDING TAPE PRIMER Shake tape primer well before using. Apply a thin uniform coating to the glass surface using the minimum amount that will fully coat the surface. Allow tape primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature. Be sure the primed surface remains free from containments prior to applying the tape. Tape primer can be removed with ad notam s preferred solvent. Vigorous scrubbing may be required. Carefully read and follow manufacturer s precautions and directions for use when handling cleaning solvents. SAFETY INSTRUCTION REGARDING SELF-ADHESIVE TAPE Shelf life: 6 months from day of dispatch by ad notam when stored in the original carton at 21 C [70 F] and 50% relative humidity. SAFETY INSTRUCTION REGARDING APPLYING RM_GM TO GLASS Pressure: Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesive contact and helps improve bond strength. Typically, good surface contact can be attained by applying enough pressure to insure that the tape experiences approximately 15 psi (100 kpa) pressure. Either roller or platen pressure can be used. Note that rigid surfaces may require 2 or times that much pressure to make the tape experience 15 psi. Temperature: Ideal application temperature range is 21-8 C [ F]. Initial tape application to surface at temperatures below 10 C [50 F] is not recommended because the adhesive becomes too firm to adhere readily. However once properly applied low temperature holding is generally satisfactory. Wet out time: After application, the bond strength will increase as the adhesive flows onto the surface. At room temperature approximately 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. This flow is faster at higher temperatures and slower at lower temperatures. Ultimate bond strength can be achieved more quickly (and in some cases bond strength can be increased) by exposure of the bond to elevated temperatures (e.g. 66 C [150 F] for 1 hour). This can provide better adhesive wet out onto the substrates. 6
7 PREPARATION REQUIRED TOOLS o Phillips-tip screwdriver o Allen wrench o Level o Measuring tape o Glass suction cups CAUTION Before getting started please notice that ad notam declines any liability for the screws and screw anchors delivered with the product. These may need to be replaced at the job site when considering the nature of the load-bearing wall, since ad notam is not familiar with the construction environment. GLASS PREPARATION - STANDARD RULE OF ASSEMBLY The mounting system elements that need to be affixed on the backside of the glass surface are basically arranged at factory according to a standard rule of assembly: centered 100mm /.94" 15mm / 5.1" 15mm / 0.59" glass metal plates 70 x 70 x 1mm 11mm / 0.4" glass angles 150 x 50 x 14mm 60mm / 2.6" centered 15mm / 5.1" If you have indicated on the ad notam glass orderform that you wish to receive the glass without factory-affixed mounting system elements, they should have been enclosed to your delivery unmounted. In this case please clean the rear side of the glass surface thoroughly with glass cleaner and/or compressed air before beginning assembly. Also make sure that you know where top and bottom is. NOTE After affixing the self-adhesive mounting elements according to your specification allow 24 hours drying to ensure perfect adhesion. WARNING ad notam declines any liability for installations without factory-affixed mounting system elements. 7
8 PREPARATION WALL PREPARATION Structural measures must be accomplished on the wall in order to create a niche for an in-wall installation. A specialist should carry these out. NICHE DIMENSIONS The required niche dimensions vary according to individual glass dimensions and the type of in-wall installation (flush or overlapping). 1. GLASS FLUSH WITH THE WALL If you want to install the glass flush with the wall, the niche needs to be created to fit and embed the monitor system, the mounting system and the glass panel. If you have decided to install the glass flush with the wall, we recommend to create the niche according to the following formula: niche width = glass width + 2mm glass width + 2mm niche height = glass height + 2mm niche depth = glass depth + 60mm glass heigth + 2mm glass depth + 60mm 2. GLASS OVERLAPPING THE NICHE If you want to install the glass overlapping, the niche needs to be created to fit and embed only the monitor system and the mounting system, while the glass surface is overlapping the niche in the wall. If you have decided to install the glass overlapping, we recommend to create the niche according to the following formula: niche width = glass width - 20mm glass width - 20mm niche height = glass height - 20mm niche depth = 60mm glass heigth - 20mm 60mm 8
9 ASSEMBLY As a first step of assembly please screw the magnets with the countersunk bolts and hexagonal nuts onto the in-wall magnet holders as follows: POSITIONING OF THE MOUNTING SYSTEM ELEMENTS The positioning of the mounting system elements varies according to individual glass dimensions and the type of in-wall installation (flush or overlapping). 1. GLASS FLUSH WITH THE WALL The mounting system elements that need to be affixed within the niche should be arranged as follows if the glass has been prepared at factory according to the standard rule of assembly (see section glass preparation): centered 75mm / 2.95" 15mm / 5.1" in-wall magnet holders 150 x 6 x 55mm 120mm / 4.72" in-wall brackets 150 x 0 x 12mm plastic spacers 150 x 0 x 10mm 75mm / 2.95" centered 15mm / 5.1" Please bear in mind to use the spacers between the in-wall brackets and the wall. 25mm / glass depth 25mm / glass depth 9
10 ASSEMBLY 2. GLASS OVERLAPPING THE NICHE The mounting system elements that need to be affixed within the niche should be arranged as follows if the glass has been prepared at factory according to the standard rule of assembly (see section glass preparation): centered 65mm / 2.56" 125mm / 4.92" in-wall magnet holders 150 x 6 x 55mm 4.72" / 120mm in-wall brackets 150 x 0 x 12mm 65mm / 2.56" centered 125mm / 4.92" Don t use the plastic spacers between the in-wall brackets and the wall. 25mm / mm /
11 MOUNTING When the niche and the glass are prepared use the suction cups to elevate the glass in order to let the self-adhesive glass angles (assembled on the lower backside of the glass) slidein the in-wall brackets (affixed in the lower niche). When the slide-in mechanism is locked in place let the self-adhesive glass metal plates (assembled on the upper backside of the glass) snap the magnets (affixed in the upper niche). NOTE The edges of the glass are very sensitive. Take care that they do not touch the wall in any way to avoid damages and split-offs. 1. GLASS FLUSH WITH THE WALL 2. GLASS OVERLAPPING THE NICHE 11
12 ad notam Web: For your local distributor please visit: / contact / worldwide reps ad notam Installation Guide RM_GM_150 * 27. February 201 * Version 2.2 MOUNTING SYSTEM FOR RECESSED IN-WALL APPLICATION
ad notam LED INTELLIGENT DIMMER INSTALLATION GUIDE Art.No. ET_548
ad notam LED INTELLIGENT DIMMER Art.No. ET_548 INSTALLATION GUIDE FOR YOUR SAFETY Please read all safety information thoroughly before using the product. Not complying with the instructions provided within
More informationINSTALLATION GUIDE. E700M & E800A Workstations. Technical Assistance call (800)
INSTALLATION GUIDE E700M & E800A Workstations Technical Assistance call (800) 655-5649 TABLE OF CONTENTS Section 1 PAGE Tools Required... 3 Parts Required... 3 Un-packaging the unit... 3 Section 2 How
More informationInstallation Instructions
Installation Instructions KFN 9855 ide en - CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations
More informationCincinnati, OH USA
Heated Portion Pack Display Case Instruction Manual Model #5580BV1, Model #5588 and Model #5581 Part No. 74797 Revised April 2000 Cincinnati, OH 45241-4807 USA e-mail: goldme19@eos.net www.gmpopcorn.com
More information6 Oz. Twin Pop. Popcorn Machine Instruction Manual Model #2666EX. Cincinnati, OH USA. Part No EX Revised June 1996
Popcorn Machine Instruction Manual Model #2666EX Part No. 16169EX Revised June 1996 Cincinnati, OH 45214-2089 USA SAFETY PRECAUTIONS This equipment is designed and sold for commercial use only. This equipment
More informationCincinnati, OH USA
Heated Portion Pack Display Case Instruction Manual Model #5580BV1, Model #5588 and Model #5581 Part No. 74797 Revised April 2000 Cincinnati, OH 45241-4807 USA e-mail: goldme19@eos.net www.gmpopcorn.com
More informationRoofing Adhesive SARNACOL 2172 Spray
Roofing Adhesive SARNACOL 2172 Spray Spray Applied Adhesive for Sarnafil G and Sarnafil G Felt roof waterproofing membranes PRODUCT DESCRIPTION TESTS PRODUCT DATA FORM Multi Purpose moisture curing PU
More informationINSTALLATION MANUAL. Touchless Paper Towel Dispenser Questions/Accessories/Parts (USA/Canada)
Touchless Paper Towel Dispenser INSTALLATION MANUAL Questions/Accessories/Parts (USA/Canada) REGISTER ONLINE AT 1-866-599-7066 www.cleancutdispenser.com 1 IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS When
More informationFAQ s ABOUT TOPZERO STAINLESS STEEL SINKS: >What type of stainless steel does TopZero use?
FAQ s ABOUT TOPZERO STAINLESS STEEL SINKS: >What type of stainless steel does TopZero use? All TopZero Stainless Steel Sinks are manufactured with top grade stainless steel that is non porous, hygi enic,
More information6 oz. Kettle Poppers With / Love My Popper Kettle Popcorn Machine Instruction Manual Models: 1871,2660,2661
Part No. 49217 Revised: June 2004 With / Love My Popper Kettle Popcorn Machine Instruction Manual Models: 1871,2660,2661 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS 2 Models: 1871,2660,2661 INSTALLATION
More informationInstruction Manual. Astro Staging Cabinet
Instruction Manual Astro Staging Cabinet 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA 2017 Gold Medal Products Co. Part No. 40269 SAFETY PRECAUTIONS DANGER Machine must be properly grounded to
More informationEW25 EW30 EW35 USER & INSTALLATION MANUAL. Model. Model. Model
ON-WALL SPEAKERS Model EW25 Model EW30 Model EW35 USER & INSTALLATION MANUAL Introduction Congratulations on your purchase of an EMP Tek EW25, 30 or 35 on-wall Speaker! Your speaker is the result of many
More informationWARNING!! The attached Gold Medal Manual is for reference only and is not intended for any other purpose. The information contained in these on line manuals is subject to change at any time. Improvements
More informationP-60 and 60 Special. Popcorn Machine Instruction Manual Model #1866, #2085, #2086 and #2656. Cincinnati, OH USA
Part No. 49064 Revised: March 2004 P-60 and 60 Special Popcorn Machine Instruction Manual Model #1866, #2085, #2086 and #2656 Models #1866 and #2086 Models #2085 and #2656 Cincinnati, OH 45241-4807 USA
More informationCarbon Rack Enclosure
USER S MANUAL Carbon Rack Enclosure CRxU Series SAVE THESE INSTRUCTIONS Please read this manual and follow the instructions for installation and use. Copyright 07 Cyber Power Systems, Inc. All rights reserved.
More informationINSTALLATION GUIDE. S700M & S800A Workstations. Technical Assistance call (800)
INSTALLATION GUIDE S700M & S800A Workstations Technical Assistance call (800) 655-5649 TABLE OF CONTENTS Section 1 PAGE Tools Required... 3 Parts Required... 3 Un-packaging the unit... 3 Section 2 How
More informationPopcorn Machine Instruction Manual Model #2551EX
Part No. 49793EX Revised January 2004 Popcorn Machine Instruction Manual Model #2551EX Cincinnati, OH 45214-2089 USA. SAFETY PRECAUTIONS INSTALLATION INSTRUCTIONS SETUP Remove all packing material and
More informationBorroughs Standard Powder Coat Colors
Borroughs Standard Powder Coat Colors Borroughs powder coat finishes are high quality, durable and inert. Borroughs offers 7 standard colors. We also offer custom color matching, using Borroughs computerized
More informationUNSIGNED HARDCOPY NOT CONTROLLED
Subject: APPROVED BY STATUS PURPOSE AFFECTED FUNCTIONS REFERENCES Optics Manager, Hardware Engineering Maintenance Revision Defines and specifies the mandatory techniques to be used in the handling and
More informationTA-12. Tabbing System USER'S GUIDE
TA-12 Tabbing System USER'S GUIDE SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. HOWEVER, CERTAIN SAFETY RULES SHOULD BE OBSERVED WHEN OPERATING THE TA12 TABBER. BEFORE USING
More information2 ADULTS REQUIRED FOR ASSEMBLING
2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your
More informationSLS Etch Primer. 300g aerosol, 250ml tin, 500ml tin, 1L tin, 4L tin
Overview White Knight Rust Guard SLS Etch Primer is an etching primer with superior locking system for maximum rust protection. Ideal for priming aluminium, galvanised iron ZINCALUME, chrome, brass and
More informationAssembly instructions. Alexandria Pedicare System ALEXANDRIA. Perfect design. Personal service.
R Assembly instructions Alexandria Pedicare System ALEXANDRIA Perfect design. Personal service. IMPORTANT SAFETY PRECAUTIONS 1. Read and follow all instructions.. Danger: To reduce the risk of injury,
More informationUndercounter Refrigeration
INSTALLATION GUIDE Undercounter Refrigeration Contents Undercounter Refrigeration..................... 3 Undercounter Specifications.................... 4 Site Preparation..............................
More informationENRGY CURB APPLICATION GUIDE FOR TPO ROOFING SYSTEMS
1. Introduction The ENRGY Curb mounting system is a lightweight, nonpenetrating, roof-integrated, photovoltaic (PV) mounting system designed to maintain roof integrity and maximize power density. This
More informationWax Base Heater & Dispenser
Wax Base Heater & Dispenser Service Manual Models: IDWB2/0900, IDWB2/0775, IDWB3/0900, IDWB3/0775, IDWB4/0900, IDWB4/0775 Introduction............................................................................
More informationNIAGARA. Niagara ShowerSpa Model #1048B-BN Owner s Manual
NIAGARA Niagara ShowerSpa Model #1048B-BN Owner s Manual Niagara ShowerSpa Model 1048B-BN Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes
More informationGE Monogram. Installation. Instructions. Stainless Steel Bottom Mount Built-In Refrigerators. Models ZICS36N RH ZICS36N LH
GE Monogram Installation Instructions Stainless Steel Bottom Mount Built-In Refrigerators Models ZICS36N RH ZICS36N LH Before you begin - Read these instructions completely and carefully. IMPORTANT - Save
More informationGCG-9. Instruction Manual. G-Series Cooler. Manual is for the following models: GCG-9-N13EB G-9-N13EB GCG-9-B13EB UPRIGHT COOLER
G-Series Cooler UPRIGHT COOLER Manual is for the following models: -N13EB G-9-N13EB -B13EB Instruction Manual FOR YOUR FUTURE REFERENCE This easy-to-use manual will guide you in getting the best use of
More informationMetaAlloy CI Primer Repair System
Pretreatment / Rinsing Product Description North America Technical Data Sheet # The MetaAlloy CI system consists of a Pre-treatment and Neutralizer rinse: 1. MetaAlloy CI Treatment is a water based chrome-free
More informationIB 835. Installation Manual. Integrated Bidet Toilet TABLE OF CONTENTS
IB 835 Installation Manual Integrated Bidet Toilet Cautions before installation Water supply should have a minimum water pressure of 10 psi For smooth drainage, water pressure must stay at its required
More informationFeniex Hammer S Distributed By: Feniex Hammer Instruction Manual / feniex.com
Feniex Hammer Instruction Manual Feniex Hammer S-3017 Distributed By: Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in
More informationHOME CINEMA SPEAKER PACKAGE
HOME CINEMA SPEAKER PACKAGE CONTENTS CONSUMER PRECAUTIONS... 2 UNPACKING...3 SETTING UP THE SPEAKERS... 4 CONNECTIONS TO THE RECEIVER... 6 SPEAKER PLACEMENT... 7 SPECIFICATIONS...Back cover OWNER S MANUAL
More informationInstallation Instructions
Installation Instructions SELECTRONIC Hard-Wired AC Powered ICU Lavatory Proximity Faucet PRODUCT NUMBER 0. Certified to comply with ASME A..M 0 American Standard M 0. ICU Faucet shown Installed on American
More informationINSTALLATION GUIDE S50M Solvent Spray Gun Cleaner
INSTALLATION GUIDE S50M Solvent Spray Gun Cleaner Technical Assistance call (800) 655-5649 TOOLS REQUIRED Phillips Screw Driver for (Optional) Stand Kit w/legs UNPACKAGING THE UNIT Step 1: Carefully inspect
More informationLITTLE BLASTER LARRY HESS AND ASSOCIATES, INC. BLAST-IT-ALL P.O. BOX 1615 SALISBURY, NC WITH DUST COLLECTOR
LITTLE BLASTER LARRY HESS AND ASSOCIATES, INC. BLAST-IT-ALL P.O. BOX 1615 SALISBURY, NC 28145 WWW.BLAST-IT-ALL.COM LITTLE BLASTER WITH DUST COLLECTOR MANUAL NUMBER: 561 TABLE OF CONTENTS PAGE FIGURE 1
More information2454 RETRO POP Popcorn Machine Instruction Manual Model #2454
2454 RETRO POP Popcorn Machine Instruction Manual Model #2454 Part No. 59415 Revised: June 2005 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS Popcorn Machines INSTALLATION INSTRUCTIONS INSTALLATION
More informationINSTALLATION INSTRUCTIONS. WOOD BLINDS 1-3/8, 2 and 2-3/8 SLAT SIZES. FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES
INSTALLATION INSTRUCTIONS WOOD BLINDS 1-3/8, 2 and 2-3/8 SLAT SIZES FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES STANDARD CORDLESS LIFT Thank you for your purchase. This blind has been custom built for you
More informationST-1 Surface Treatment
and Adhesion Promotion APPLICATION MANUAL TABLE OF CONTENTS About 1 Laboratory Testing Protocols 2 Manual Scrub Application - rinse 2 Manual Scrub Application - no rinse 3 High Pressure Spray Application
More informationTOTAL SPEAKER SOLUTIONS
TSS-4000 TOTAL SPEAKER SOLUTIONS Owner s Guide OWNER S GUIDE Table of Contents 3 Introduction 4 Planning Your System 4 Placement 5 Installation 5 Tabletop/Shelf Placement Assembly 8 Wall-Mounting the Using
More informationM5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual
M5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual Introduction..3 Safety Precautions 4 Installation Instructions 5 Electrical Connections..7 Operating Instructions..8 Maintenance Procedures...8 Parts
More informationAstro. FF-14 Friction Feeder. Operator Manual
Astro FF-14 Friction Feeder Operator Manual SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. OBSERVE SAFETY RULES WHEN OPERATING FF-14 FRICTION FEEDER. BEFORE USING FF-14, READ
More informationINSTALLATION INSTRUCTIONS UNDERCOUNTER DISHWASHERS
INSTALLATION INSTRUCTIONS UNDERCOUNTER DISHWASHERS VIKING 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 IMPORTANT - PLEASE READ AND FOLLOW Before beginning - please read these instructions
More informationInstructions for Coating Fimbel Garage Door Panels
www.aqua-diy.com Instructions for Coating Fimbel Garage Door Panels Aqua DIY D100 is a high performance heat reflective water-based coating. It has been shipped to you with a thickness suitable for manual
More informationAssembly instructions
Assembly instructions Important safely instruction 4 Children safety 4 Characteristics of the appliance and installation requirements 5 Installation niche features: built-in 6 Installation niche features:
More informationINSTRUCTION MANUAL C-4010 SCAN HERE
FENIEX // 2018 // INSTRUCTION MANUAL Is this the latest version? SCAN HERE C-4010 INSTRUCTION MANUAL Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted
More informationInstructions for Installing the MMD Rear Window Louvers
Instructions for Installing the MMD Rear Window Louvers Time Required: Less than 1 hour of labor (5 hours total installation if the 4 hours of letting the brackets set are included). Required Tools: Socket
More informationASTRO FF14 FRICTION FEEDER SERVICE MANUAL
ASTRO FF14 FRICTION FEEDER SERVICE MANUAL Astro Machine Corp. 630 Lively Blvd. Elk Grove Village, IL 60007 Phone: (847) 364-6363 Fax: (847) 364-9898 www.astromachine.com SAFETY PRECAUTIONS THIS EQUIPMENT
More informationG-10f/GCG-10f UPRIGHT COOLER
G-Series Cooler G-10f/GCG-10f UPRIGHT COOLER Manual is for the following models: G-10F, G-10-F33EB GCG-10F, GCG-10-F33EB GCG-10F2, GCG-10-F233EB G-10-F33EB-HC, GCG-10-F33EB-HC GCG-10-F233EB-HC Instruction
More informationInstallation Instructions. For the 18 Built-In Dishwasher and Front Color Panels
Installation Instructions For the 18 Built-In Dishwasher and Front Color Panels Printed in USA 154232102 Before You Begin DO NOT INSTALL DISHWASHER UNTIL YOU HAVE READ ALL INSTRUCTIONS. FOR YOUR SAFETY,
More informationAasta Hansteen Topside EPC Project. 1 Accepted. Date : 20/08/2015. Issued for Construction. D.Y.Kang D.Y.Kang. Issued for Review.
Aasta Hansteen Topside EPC Project Aasta Hansteen Topsides EPC Project Engineering Review Status 1 Accepted By : LSCHOK Date : 20/08/2015 04 08/10/2015 Issued for Construction D.Y.Kang H.R.Jo S.H.Kim 03
More informationEcono-16 Models 2024EX, 2024STX 16oz. Popcorn Machine Instruction Manual
Econo-16 Models 2024EX, 2024STX 16oz. Popcorn Machine Instruction Manual Part No. 67833EX Revised: July 2008 Operator Side Customer Side Cincinnati, OH 45241-4807 USA Table of Contents I. Safety Precautions.
More informationInstallation Operation Care
Installation Operation Care Roman Shades EasyRise and UltraGlide Lifting Systems CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Mounting Types and Window Terminology... 2 Installation:
More informationHOSHIZAKI ICE DISPENSING BIN/ WATER DISPENSER MODEL DM-90A INSTRUCTION MANUAL
ISSUED: AUG. 2, 1999 REVISED: FEB. 28, 2000 HOSHIZAKI ICE DISPENSING BIN/ WATER DISPENSER MODEL DM-90A INSTRUCTION MANUAL FOREWORD IMPORTANT Only qualified service technicians should attempt to install,
More informationRIO. Rio ShowerSpa Model #1049B-BN Owner s Manual
RIO Rio ShowerSpa Model #1049B-BN Owner s Manual Rio ShowerSpa Model 1049B-BN Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and
More informationInstruction Manual. Portion Cup Cheese Warmer
Instruction Manual Portion Cup Cheese Warmer Model No. 5581-00-100, 5581-01-100, and 5581-00-101 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA 2017 Gold Medal Products Co. Part No. 74797 SAFETY
More informationFilm-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema
More informationDM60-xxx Antennas. 1. Assembly. Installation Instruction for CMAX Antennas
Installation Guide for CMAX-DM20/DM22S/DM30/ DM60-xxx Antennas Note: Please read the complete description before starting the installation. Be sure that connectors are properly sealed from water if no
More informationSPRAYING MANUAL. Adhesives That Outperform
SPRAYING MANUAL Quin Global UK Unit 1, Ruthvenfield Avenue Inveralmond Industrial Estate Perth, PH1 3WB www.quinglobal.com www.tensorglobal.com sales.uk@quin-global.com 0845 381 22 33 Adhesives That Outperform
More informationMK-660 tile saw OWNER'S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-660 tile saw OWNER'S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 06 03.207 Manual Part# 5346 Caution: Read all safety and operating instructions before using this equipment.
More informationHONEYCOMB AND PLEATED SHADES
HONEYCOMB AND PLEATED SHADES GETTING STARTED BRACKET INFORMATION A few simple tools are required: The brackets you received with your product are required for proper installation. Brackets should be installed
More informationInstallation Instructions
Installation Instructions For Built-In NoFrost Combined Refrigerator-Freezers C 16 CI 16 7080 007-00 IMPORTANT PLEASE READ AND FOLLOW THESE INSTRUCTIONS These instructions contain Warning and Caution statements.
More informationMK-SINGLE DISC GRINDER OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-SINGLE DISC GRINDER OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS SDG-3 Revision 202 11.2011 SDG-11 Manual 158273 Caution: Read all safety and operating instructions before using
More informationInstallation Instructions
Instructions for Topload Washers Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual
More informationOperation and Maintenance Manual. MNL /17/02 Rev. A MODEL 414
Operation and Maintenance Manual MNL90005 10/17/02 Rev. A MODEL 414 THIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY Congratulations! Your selection of the Insta Graphic Systems (IGS) heat
More informationWarmer Cabinet Instruction Manual Model # 5581, 5581EX. Part No
Warmer Cabinet Instruction Manual Model # 5581, 5581EX Part No. 74797 SAFETY PRECAUTIONS INSTALLATION INSTRUCTIONS Inspection of Shipment: Unpack all cartons and check thoroughly for any damage that may
More informationInstallation Instructions U-RAD-LT Electric Radiant Heaters
Installation Instructions U-RAD-LT Electric Radiant Heaters 1 PG421-2 161-058006-001 May 2016 2 U-RAD-LT Electric Radiant Heaters The Safety Alert Symbol is used to indicate a risk of personal injury.
More information18 INCHES, OSCILLATING STAND FAN
To Buy: Contact Sylvane at 800-934-9194 or visit www.sylvane.com For Product Support: Contact Soleus Air at (888) 876-5387 18 INCHES, OSCILLATING STAND FAN OWNER S MANUAL Model # FSM-45 PLEASE READ AND
More informationTimber Venetians Manual
Timber Venetians Manual Measuring & Limitations Timber Venetians Measuring Architrave & Reveal Face & Reveal Corners Bays Options & Limitations Maximum Width Minimum Width Fixed Control Minimum Width Tilt
More informationDestination Collection Whirlpool Bath Installation Instructions
Tools you might need for proper installation Galvanized Nails or Screws Large Level Hammer or Screw Gun Shims Adhesive Thank you for purchasing Praxis Bathware. For best results, please read and follow
More informationInstallation Instructions
4 3 Installation Instructions Self Cleaning Free-Standing Electric Range EER2000, EER3000, EER3001, EER3002, JBP10, JBP24, JBP26, JBP30, JBP35, JBP48, JBP64, JBP66, JBP68, JBP69, JBP71, JBP78, JBP80, JBP82,
More informationInstallation Instructions
Dear customer! Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines clean lines, everyday
More informationGCG-10. Instruction Manual. G-Series Cooler. Manual is for the following models: GCG-10-N33EB G-10-N33EB UPRIGHT COOLER
G-Series Cooler GCG-10 UPRIGHT COOLER Manual is for the following models: GCG-10-N33EB G-10-N33EB Instruction Manual Manual is for the following models: GCG-10-N33EB G-10-N33EB Instruction Manual GCG-10
More informationTOULOUSE DOUBLE SINK CONSOLE
TOULOUSE DOUBLE SINK CONSOLE Date: 2016 05 19 www. potterybarn.com Page 1 of 8 Important Safety Instructions: CAUTION: Keep natural stone materials in its packaging until installation and store on its
More informationInstruction Manual. Cheddar Easy All-In-One Cheese Corn Shop
Instruction Manual Cheddar Easy All-In-One Cheese Corn Shop Model No. 2703-00-000 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA 2017 Gold Medal Products Co. Part No. 110028 SAFETY PRECAUTIONS
More informationInstallation and maintenance instructions
6304 4995 0/004 GB For installer Installation and maintenance instructions Flue gas heat exchanger WT50/60 Please read thoroughly prior to installation and maintenance. Summary About this manual This equipment
More informationInstallation instructions Refrigerators and freezers for integrated use, door-on-door
Installation instructions Refrigerators and freezers for integrated use, door-on-door 010612 7084276-04 IK/ IKB/ IKP/ IG/ IGN... 1/ 3/ 6 General safety information Contents 1 General safety information...
More informationWAILEA OWNER S MANUAL
WAILEA OWNER S MANUAL The blades in each pack are matched for equal weight to assure smooth fan operation. If more than one fan is being installed, be careful not to mix blades from different cartons.
More informationGETTING STARTED OPTIONAL HARDWARE A
ROLLER SHADES Continuous Cord Loop and Link System without Cassette Double Roller GETTING STARTED OPTIONAL HARDWARE A few simple tools are required: Hold Down Brackets Spacer Block Spacers Steel Tape Measure
More informationINSTALLATION INSTRUCTIONS M SHOWER SLIDING RAIL
INSTALLATION INSTRUCTIONS M1-4533 SHOWER SLIDING RAIL Dimensions in Inches (& Millimetres) M1-4533 Ø15/16" (Ø24mm) 2 11/16" (68mm) 1 3/8" (35.6mm) 2 11/16" (68.7mm) 2 13/16" (71mm) 2 3/8" (60mm) 2 11/16"
More informationCitation Models #2001, 2001ST, 2001BN Instruction Manual
Models #2001, 2001ST, 2001BN Instruction Manual Part No. 67861 Revised: February 2009 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS 2 Forward This manual covers the 16oz. Popcorn Machine, model number
More informationMBWeich 100. Operating manual. 1. Introduction. 2. Use
Soaking Unit MBWeich 100 Meier-Brakenberg GmbH & Co. KG Brakenberg 29 32699 Extertal Germany Tel.: +49-5262/993 99-0 Fax: +49-5262/993 99-3 E-mail: info@meier-brakenberg.de Operating manual 1. Introduction
More informationDEMA 832 LAUNDRY MASTER TM INSTALLATION INSTRUCTIONS
System Overview DEMA 832 LAUNDRY MASTER TM INSTALLATION INSTRUCTIONS The DEMA 832 Laundry Master is designed for long reliable use with simplicity in mind for both the installer and user. The system is
More informationJuna Ceiling Fan JU54. Installation Instructions Instrucciones de instalación Instructions d installation
Juna Ceiling Fan JU54 Installation Instructions Instrucciones de instalación Instructions d installation Read and Save These Safety Precautions. Turn off electricity at main switch before wiring or servicing
More informationHONEYCOMB AND PLEATED SHADES
HONEYCOMB AND PLEATED SHADES GETTING STARTED BRACkET INFORMATION A few simple tools are required: The brackets you received with your product are REQUIRED for proper installation. Brackets should be installed
More informationTOYOTA COROLLA BODY SIDE MOLDING Section I - Installation Preparation
Section I - Installation Preparation Part Number: PT29A-02095-XX Kit Contents 1 1 Molding, LH Front Door 2 1 Molding, LH Rear Door 3 1 Molding, RH Front Door 4 1 Molding, RH Rear Door 5 1 Instruction sheet
More informationImportant Safeguards (For your safety, please follow the instructions below.) Specification. Warning. Thermal mixing valve faucet.
INSTALLATION MANUAL Important Safeguards (For your safety, please follow the instructions below.) AUTOMATIC FAUCET Thermal mixing valve faucet Specification In this Instruction Manual, the following symbols
More information#2389, 2389EX, 2389JX
Part No. 47690 LiL Max Instruction Manual Model #2389, 2389EX, 2389JX Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS Installation Instructions Lil Max 8 Oz. Popcorn Machine Inspection of Shipment: Unpack
More information51AKB / 51 AKC OWNER S MANUAL
51AKB / 51 AKC OWNER S MANUAL This manual applies to the following models 51AKB 009 51AKB 012 51AKC 009 51AKC 012 Read this instruction manual thoroughly before using the air conditioner. Control panel
More informationFOR USE BY QUALIFIED PERSONNEL ONLY
MNL9020 Rev. A.3 05.5.7 FOR USE BY QUALIFIED PERSONNEL ONLY MODEL 20 OPERATION AND MAINTENANCE MANUAL Safety Summary International Symbols WARNING In case of power cord damage, do not attempt to repair
More informationG-10s. Instruction Manual. G-Series Cooler UPRIGHT COOLER. Part No.11IPA
G-Series Cooler UPRIGHT COOLER Part No.11IPA-062800 Instruction Manual FOR YOUR FUTURE REFERENCE Thank you for using our product. This manual will guide you in getting the best use of your cooler. Remember
More informationRhinoskin Spray On Insulation Ceramic Insulation Coating
Application Temperature: Adhesion and drying of the acrylic latex coating requires a minimum surface and ambient temperature of 50 Fahrenheit (10 Centigrade). To fully cure and harden a minimum ambient
More informationPart No EX Revised: January Super Pop Maxx. Instruction Manual Model 2600EX
Part No. 17384EX Revised: January 2009 Super Pop Maxx Instruction Manual Model 2600EX SAFETY PRECAUTIONS 2 Forward This manual covers the 16oz. Super Pop Maxx Popcorn Machine, model number 2600EX. Installation
More informationInstallation and Care Instructions. Wood Blinds and Alternative Wood Blinds. LiteRise Touch System. Getting Started
Installation and Care Instructions Wood Blinds and THANK YOU for purchasing a Hunter Douglas product. Your new blind has been custom built for you from the highest quality materials. Once in your window,
More informationINSTALLATION INSTRUCTIONS. WOOD BLINDS 1-3/8, 2 and 2-3/8 SLAT SIZES. COMPOSITE FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES
INSTALLATION INSTRUCTIONS WOOD BLINDS 1-3/8, 2 and 2-3/8 SLAT SIZES COMPOSITE FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES POLYMER FAUX WOOD BLINDS 2 and 2-1/2 SLAT SIZES STANDARD CORDLESS LIFT Thank you for
More informationOperator s Guide. VP321 Chamber Machine Commercial Vacuum Packaging System
Operator s Guide VP321 Chamber Machine Commercial Vacuum Packaging System Congratulations on your purchase of the VacMaster VP321 Chamber Machine! Thank you for purchasing the VacMaster VP321 Chamber Machine.
More informationInstallation Instructions
Wood Blinds Installation Instructions Heartland Woods Heartland Woods w/ Continuum *Click on any page to return to the Table of Contents* Heartland Woods Wood Blinds Mounting Inside or Outside Window Frame
More informationPortion Bag Cheese Warmer
Instruction Manual Model #5599 Part No. 38580 Revised Feb. 2001 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS This equipment is designed and sold for commercial use only. This equipment is not to be
More informationIn-Wall Slide-out OEM INSTALLATION MANUAL. In-Wall Slide-out OEM Installation Manual
In-Wall Slide-out OEM INSTALLATION MANUAL Rev: 01.22.2018 In-Wall Slide-out OEM Installation Manual TABLE OF CONTENTS Safety and System Information 2 In-Wall Slide-Out Chassis Specification 3 6.1.1 Slide-Out
More informationCrestline Dampening System
Crestline Dampening System Installation Instructions Hamada 500, 600, 700, E-47, SU47 Series Parent Press X88-25 01/2001 Rev-C 2593 GENERAL INFORMATION ATTENTION CRESTLINE DAMPENER OWNER! Accel Graphic
More information