SOUTH ASIA REGIONAL INITIATIVE
|
|
- Shanon Dixon
- 5 years ago
- Views:
Transcription
1 SOUTH ASIA REGIONAL INITIATIVE SARI Part 21 Wrap-up meeting Prepared by: ED Karachi, 21 to 24 August 2017 MEETING PARTICIPANTS CAA Nepal CAA AFM PAC KARMA Air Blue Serene Air Scale Aviation Industry PIA Shaheen SAI Power Plant Engineering SEAMS Airbus SARI Refer to the list of participant given as annex 1. Meeting agenda is attached as annex 2. SUMMARY 1. General 34 experts from (11 from PCAA and 17 from the industry) plus one expert from CAA Nepal attended the meeting conducted by one expert from Airbus and the SARI coordinator. Although CAA Bangladesh announced their participation their experts could not process their visa application on time. In accordance with SARI procedures the draft agenda was distributed 6 weeks before the activity for comment to the SARI Partners. No feed-back from the SARI partners was received prior to the meeting from and CAAP was late in the distribution of the information to its industry. Therefore the agenda had to be slightly revised to include some of the specific requests indicated by the industry from to take into account their requirements and expectations The meeting was opened and closed by Mr. Muhammad Zahid Bhatti, recently appointed Director Airworthiness. SARI Part 21 WU meeting Summary Final issue 1 / 8
2 The following presentations were handed over to the participants as soft copies. Due to time constraints and re-arrangement of the agenda all were not delivered in full during the meeting: Airbus: EASA DOA 24 years of history Industry & EASA strategy DOA concept DOA Standards DOA pitfals EASA DOA Performance Tools DOA Part 21 Novelties Certification programme & MC Continued airworthiness Change to TC Subpart M - Repairs SARI: Recap Subpart J Subpart B,D, E & M reminder & commonalities CVE All these presentations as well as some supporting documents handed over by Airbus are now available on the SARI website. Feed-back forms were distributed to the participating organizations. All the feed-back forms (12) show the meeting achieved its objectives in providing the participants with a detailed explanation of SARI Part 21 and the concept of type certification process. They also pointed out a good performance of the EU experts and emphasize the quality of their presentations. Some of the forms highlighted the late distribution of the agenda and lack of communication from the PCAA before the meeting started. 2. Outcomes of the meeting: The meeting confirmed: Both the PCAA and the local industry interest in the concept of design organisation also today they are following their own regulation based on the FAR 21 concept. The need for to develop solid type certification procedures for products, change to products and repairs. The significant knowledge the local industry has regarding design development. The insufficient understanding of the concept of certification procedures as well as of interpretation of the CS in. The need to get training on some key CS conceptual paragraphs such as The EU experts presented the DOA concept since its development in 1993 and insisted on its main pillars. They explain that DOA objective is to ensure safety of products. They also explained the next steps now contemplated by EASA and the EU industry relying on a risk based approach and taking into account the experience gained through the implementation of EASA Part 21 during more SARI Part 21 WU meeting Summary Final issue 2 / 8
3 than 20 years. Actions also currently led under the ASD umbrella to standardize some of the certification procedures such as the certification tests were also presented. Certification programmes and Means of Compliance were addressed through different practical cases some of them proposed by the i aviation industry, mainly the development of a glass cockpit on a CS23 aircraft developed by Kamra and a large cabin change currently designed by PIA. An important part of the discussion with the delegates addressed control of suppliers in terms of design. Through the information received the PCAA as well as the local industry realized the efforts they still have to make before addressing compliance of design changes and repairs with applicable CS in a satisfactory way. The EU experts finally provided the participants with names of aviation academies in Europe or the US that may deliver courses the PCAA and local industry need to get the full understanding of compliance with the CS. 3. Miscellaneous Separate discussions between the PCAA DDG, the PCAA Director of Airworthiness and the EU experts showed that would like to continue cooperating with Europe to expand their design and certification capabilities. The EU experts explained that a profitable way to go would that i aerospace companies apply for an EASA DOA one for minor repairs, another for minor change to Type certificate. EASA and CAA teams would combine their effort to investigate the capabilities of the 2 applicants. They will learn from each other. That would simplify then PCAA to implement their own DOA requirement and contemplate more complex design activities and the recognition by EASA of their regulatory system (working arrangement) as an incentive to get confidence in the design and certification capabilities in. Few questions on Part 145 or Part M but in relation to Part 21 were also addressed during the meeting or after the meeting in coordination with EASA. 4. Conclusions: willing to develop and implement the concept of EASA/SARI Part 21. Further actions with EASA and the EU industry to be considered under EU-APP or outside to enhance capabilities of in the field of repairs, Change to Type certification and even Type Certification of products. Need for to train PCAA and industry personnel on certification techniques to master compliance with the CS. ************* SARI Part 21 WU meeting Summary Final issue 3 / 8
4 Annex 1 Country Participant Member Nepal Mr. Bharat Parajuli CAAN Bharat1@LIVE.COM Pakista n Pakista n Mr. Tahir Abbas PCAA Tahir.abbas@caapakistan.com.pk Mr. Mohammad Usman Usmani Mr. Nuhammad Muzammil PCAA PCAA usmanusmani@caapakistan.com.pk Muhammad.muzammil@caapakistan.com.pk Humayun Yousaf PCAA Humayun.yousaf@caapakistan.com.pk Mr. Nayyar Faruqui PCAA Nayyar.faruqui@caapakistan.com.pk Mr. Muhammad Sheraz PCAA Sheraz@caapakistan.com.pk Mr. Mudassir Masood PCAA Mudassir.masood@caapakistan.com.pk Mr. Arsalan Shafiq PCAA Arsalan.shafiq@caapakistan.com.pk Mr. Shehzad Mahmood PCAA Shehzad.mahmood@caapakistan.com.pk Mr. Umair Sufyan PCAA Umair.sufyan@caapakistan.com.pk Mr. Aminullah Mengel PCAA Aminullah.mengel@caapakistan.com.pk S/L Zakir Zakulsul8263@gmail.com Gp Capt Murtaza mnssgd@yahoo.com Sqn Ldr Omer Jamal Omerjamal.cae@gmail.com Sqn Ldr Khurram Rehman Thunderrider17@gmail.com Mr. Raheel Mushtaq Raheel2547@gmail.com Mr. Asjadullah Qureshi Air Blue Asjadullah.qureshi@airblue.com Mr. Yasser Ahmad Air Blue Yassar.ahmed@airblue.com SARI Part 21 WU meeting Summary Final issue 4 / 8
5 Mr. Junaid Ahmed Khan Air Blue Mr. Bilal Ahmad Serene Air Mr. Muhammad Savi SEAMS Mr. Faisal Naveed Asif Scaled Mr. Ammad Uddin Shaheen Mr. Talha Malik Shaheen Mr. Iftikhar Muhammad PIA Mr. Salahuddin Azhar PIA Mr. Waseem Khakid PIA Mr. Muhammad Waqar Sohail PIA Mr. Faisal Nawaz PIA Mr. Aslam Tariq PIA H.M. Waqar Sohail PIA Mr. Fahad M Malik SEAMS Fahad.malik@seams.com.pk Mr. Rizwan Tariq Arfi SEAMS Riswan.arfi@seams.com.pk Europe Mr. Patrick Le Guirriec Airbus Patrick.le- guirriec@airbus.com SARI Mr. Eric Dormoy SARI eric.dormoy@searif- sari.org SARI Part 21 WU meeting Summary Final issue 5 / 8
6 Annex 2 SARI Part 21 Wrap-up meetings First meeting Karachi 21 to 24 August 2017 DAY Opening (PCAA/ SARI) Introduction of the participants and record of expectations (ALL) Objectives of the wrap-up meeting and ways to go (SARI) Agenda review and adaptation / validation (SARI) Industry standards and compliance with EASA regulations vision / strategy Coffee break EASA Part 21 Initial and continued airworthiness: Integral approach. General principles, actors and current status 12:00-12:30 EASA Part 21 Subpart J An integral organisational approach. Reminder to the Design Assurance System Lunch SARI Part 21 Subpart J fundamental aspects Key actors /Responsibilities / Competence / Privileges (SARI) Tea break SARI Part 21 Subpart J CVE function: / responsibilities associated to the function / Qualification and nomination of individuals to conduct the function/ Realisation of the CVE function on practical means/ etc.) (SARI) Wrap-up day 1 SARI Part 21 WU meeting Summary Final issue 6 / 8
7 DAY SARI 21 Subpart B, D, E and M (Reminder & commonalities) (SARI) Coffee break 11:00-11:30 Practical case: presentation of the competency map in a Design Organisation Change Product Rule 21.A.101. Selection of Certification basis: Certification basis / Special Conditions (SC) /Equivalent Safety Finding (ESF) / Exemptions (will encompass environmental protection and OSD although not considered by SARI Part 21 today) Lunch Repair designs and Changes to TC: classification Major / Minor Tea break Means of Compliance to Certification Specifications (MC) Typical aspects and content of a Certification programme; Best practices on the coordination between Authority and the applicant. DAY Practical cases (Changes to TC & repair design classification) (All) Coffee break Practical case (Certification basis) (All) Lunch Practical case (Certification programme & Means of Compliance) (All) Tea break :15 Practical case (Certification file / dossier) (All) 16:15-17:00 Practical case: configuration control in a change to the TC. (All) Identification of the [changed] Type Design. SARI Part 21 WU meeting Summary Final issue 7 / 8
8 DAY Main outcomes of day 3 (SARI) Coffee break 11:00 12:30 Practical case (Coordination between Design and Production) Transferring of information on eligibility and approval status from the design holder to production organisations. (All) Lunch Open Q&A session on Subpart B, D, E, M & J (All) Tea break Wrap-up meeting evaluation (All) Conclusions and closing (PCAA/SARI) ************ SARI Part 21 WU meeting Summary Final issue 8 / 8
SOUTH ASIA REGIONAL INITIATIVE
SOUTH ASIA REGIONAL INITIATIVE 8 th SARI 21 WG meeting Prepared by: ED Kathmandu, 6 to 8 February 2018 MEETING PARTICIPANTS CAA Bangladesh CAA Maldives CAA Nepal Trans Maldivian Airways (1) Yeti Airlines
More informationDOA Workshop - Jakarta. Sharing experiences in the field of DOA. Wendell Lynch EASA International Cooperation Officer (DOATL)
DOA Workshop - Jakarta Sharing experiences in the field of DOA Wendell Lynch EASA International Cooperation Officer (DOATL) Contents! Why DOA?! DOA Rulemaking development General Why DOA? Rela-onship with
More informationReady-to-install products and services
Ready-to-install products and services Introduction This document provides a condensed overview of Lantal s ready-to-install product categories and its portfolio of interior design, laboratory, and logistics
More informationAirworthiness Directive
Airworthiness Directive AD No.: 2016-0024 Issued: 26 January 2016 EASA AD No.: 2016-0024 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on
More informationASSEMBLY 37TH SESSION
International Civil Aviation Organization WORKING PAPER 20/9/10 (Information paper) English only ASSEMBLY 37TH SESSION TECHNICAL COMMISSION Agenda Item 33: Halon replacement HALON REPLACEMENT CHALLENGES
More informationPart 21 Design Organisation Approval (DOA) Implementation Workshop Industry
Part 21 Design Organisation Approval (DOA) Implementation Workshop Industry 27-28 November 2012 HALL 01/MARITIM Conference Room MARITIM HOTEL KÖLN Köln, Germany Part 21 DOA Implementation Workshop (Industry)
More information2017 Review. Michael Greer Principal Airworthiness Surveyor 28 March 2018
2017 Review Michael Greer Principal Airworthiness Surveyor 28 March 2018 Workload Currently 158 EASA Part 21 Production Organisations 6 Pending / under initial investigation Findings Analysis - 2017 Total
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY Brussels, 23 October 2018 REV1 Replaces the Q&A document published on 13 September 2017 QUESTIONS AND ANSWERS RELATED TO THE UNITED KINGDOM'S
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationHalon: Update of Part-26 to comply with ICAO Standards
Rulemaking Directorate Terms of Reference for a rulemaking task Halon: Update of Part-26 to comply with ICAO Standards ISSUE 1 15/05/2013 Applicability Process map Affected regulations and decisions: Part-26
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationCAC OVERVIEW. CAC Roles and Responsibilities CAC Operations CAC Membership CAC DAC Relations
CAC OVERVIEW CAC Roles and Responsibilities CAC Operations CAC Membership CAC DAC Relations 1 Purpose of This Overview To increase the level of awareness of CAC members so that they know what is expected
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationEASA Halon Replacement Status. presented by Enzo Canari Cabin Safety Expert IASFPWG Meeting Atlantic City,1-2 November 2017
EASA Halon Replacement Status presented by Enzo Canari Cabin Safety Expert IASFPWG Meeting Atlantic City,1-2 November 2017 Halon Replacement Dates Purpose End date Mandatory Retrofit Forward fit New applications
More informationBUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY
Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
More information[Docket No. FAA ; Product Identifier 2017-NE-02-AD; Amendment ; AD ]
[Federal Register Volume 82, Number 189 (Monday, October 2, 2017)] [Rules and Regulations] [Pages 45710-45712] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc
More informationThe European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY
Ref. Ares(2017)2066048-21/04/2017 EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY Health and food audits and analysis DG(SANTE) 2016-8748 - MR FINAL REPORT OF AN AUDIT CARRIED OUT IN
More informationBUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
More informationHealth and Safety Policy. Version Author Revisions Made Date 1 Colin Campbell First Draft March 2014
Fire Safety Policy Originator name: Section / Dept: Implementation date: Clive Parkinson Health & Safety March 2014 Date of next review: March 2017 Related policies: Health and Safety Policy Policy history:
More informationBUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
More informationIntroduction. 1 The Global Customer Committee Charter
Welcome to Honeywell s Global Customer Committee. You have been invited to this select group of Aerospace industry experts because we value your opinion on the topics that are important in the eyes of
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationREPORT on the implementation of the CoE/EU Joint Programme Emerald Network of Nature Protection Sites, Phase II in Belarus in 2013
Ministry of Natural Resources and Environmental Protection of the Republic of Belarus BPA Ecological Initiative REPORT on the implementation of the CoE/EU Joint Programme Emerald Network of Nature Protection
More informationBUSINESS PLAN CEN/TC 194 USTENSILE IN CONTACT WITH FOOD EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 194 USTENSILE IN CONTACT WITH FOOD EXECUTIVE SUMMARY Business environment The general title of CEN/TC 194 Utensils in contact with food actually covers a number of distinct
More informationENVIRONMENTAL ETHICS AND PROJECT MANAGEMENT OF ARCHITECTURE
19-004 The 2005 World Sustainable Building Conference, ENVIRONMENTAL ETHICS AND PROJECT MANAGEMENT OF ARCHITECTURE Seiki TAGAWA Ph.D 1 1 Department of Design and ure, Hokkaido Tokai University, 224 Chuwa
More informationCRAFTING THE FUTURE MEDITERRANEAN 18/ 19 APRIL ROME. Programme co-financed by the European Regional Development Fund
CRAFTING THE FUTURE MEDITERRANEAN 18/ 19 APRIL 2018 ROME PRODUCTION PRODUCTION AREA AREA Showcasing Showcasing projects projects & ideas & ideas Project partners, decision-makers, experts and the media.
More informationTransitioning to ISO 9001:2008. Profession Development for ASQ Chapter 309 Tanzco Management Consulting, LLC
Transitioning to ISO 9001:2008 Profession Development for ASQ Chapter 309 Tanzco Management Consulting, LLC ISO 9001 ISO 9001 is the most widely used standard for quality management systems in the world
More informationAirworthiness Directives; Kidde Aerospace Part Number (P/N) Hand-Held Halon Fire Extinguishers
[Federal Register: January 7, 2004 (Volume 69, Number 4)] [Rules and Regulations] [Page 864-867] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr07ja04-4] DEPARTMENT OF TRANSPORTATION
More informationType Acceptance Report
TAR 10/21B/6 HONEYWELL LTS101 Series Aircraft Certification Unit TABLE OF CONTENTS EXECUTIVE SUMMARY 1 1. INTRODUCTION 1 2. ICAO TYPE CERTIFICATE DETAILS 1 3. TYPE ACCEPTANCE DETAILS 2 4. NZCAR 21.43
More informationSELF PRESERVATION SOCIETY By Jim Creak
SELF PRESERVATION SOCIETY By Editor of the Means of Escape Magazine and Chairman of The Health & Safety Signs Association. w w w. m e a n s - of- e s c a p e. c o m Agenda Regulatory Reform Fire Safety
More informationGASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
More informationRural Roads for Development 2017 RURAL ROADS FOR DEVELOPMENT 2017
RURAL ROADS FOR DEVELOPMENT 2017 Day 1 (September 11): Rural Roads for Development Session 0815-0845 0 Registration 0845-0930 1 Introduction and welcome to course Dr Gurmel Ghataora and Dr Michael Burrow,
More informationPART 3-O REQUIREMENTS FOR SPRINKLER SYSTEMS MAINTENANCE AND SUPERVISION. 3-O Introduction O.1 Scope of Maintenance and Supervision...
CONTENTS Schedule of amendments for this part of the scheme document Page 1 of 14 3-O Introduction...3 3-O.1 Scope of Maintenance and Supervision...3 3-O.2 Certification conditions...5 3-O.3 LPS 1233 Service
More information[Docket No. FAA ; Directorate Identifier 2004-CE-25-AD; Amendment ; AD ]
[Federal Register: October 22, 2004 (Volume 69, Number 204)] [Rules and Regulations] [Page 61993-61997] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr22oc04-3] DEPARTMENT
More informationUBM plc. Investor Day Presentation 17 June 2014
UBM plc Investor Day Presentation 17 June 2014 1 Today s Agenda 11:30 Arrival with Tea & Coffee 12:00 Presentation UBM P&M Series IFSEC Q&A 13:30 Lunch 14:00 Tour 15:00 Q&A 16:00 Depart 2 The UBM Team
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of inspection and testing of interconnected control and fire alarm systems Level 4 Credits 4 Purpose This unit standard is for personnel employed in the fire protection
More informationSafety Services Guidance. Arranging fire evacuation practices
Arranging fire evacuation practices Key word(s): Fire Evacuations, Evacuation Practices, Target audience: Fire Trainer & Evacuation Co-ordinator; Practice Organisers; Fire Evacuation Marshalls; Local and
More informationEASA PART 145 CONTINUATION TRAINING
EASA PART 145 CONTINUATION TRAINING Q1 & Q2 2017 Q1 & Q2 2017 Page 1 of 15 CONTENTS: 1 INTRODUCTION 2 EASA SIB (SAFETY INFORMATION BULLETIN) 3 MOE & TP CHANGES 4 145.ALTITUDEGLOBAL.AERO CHANGE TO ALTITUDEGLOBAL.AERO
More informationGASTEC QA. Evaluation Guideline KE 191. Amendment A1 Excess flow valves. KE A1 March 2012
KE 191 - A1 March 2012 GASTEC QA Evaluation Guideline KE 191 Amendment A1 Excess flow valves Foreword and introduction These GASTEC QA Approval requirements amendment have been accepted by the Board of
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements
More informationNational Certificate in Fire and Rescue Services Airport (Level 3)
NZQF NQ Ref 1454 Version 2 Page 1 of 7 National Certificate in Fire and Rescue Services Airport (Level 3) Level 3 Credits 40 This qualification is expiring. The last date to meet the requirements is 31
More informationNational Certificate in Fire and Rescue Services (Vegetation) (Level 3)
NZQF NQ Ref 0540 Version 5 Page 1 of 8 National Certificate in Fire and Rescue Services (Vegetation) (Level 3) Level 3 Credits 55 This qualification is expiring. The last date to meet the requirements
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationPQS Quality Assurance protocol. TITLE: Cold Room/Freezer Room:
PQS Quality Assurance protocol WHO/XXX Original: English Distribution: General TITLE: Cold Room/Freezer Room: Note that this protocol is intended to form part of the contract documentation for a new cold
More informationTable of Contents for the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017
Chapter I o Scope and definitions Article 1 Subject matter and scope 13 Article 2 Definitions 15 Article 3 Amendment of certain definitions 20 Article 4 Regulatory status of products 20 Chapter II o Making
More informationMeasurement of Safety Integrity of E/E/PES according to IEC61508
Measurement of Safety Integrity of E/E/PES according to IEC61508 Mr. Chen Zhenkang TUV Rheinland Singapore 18. May. 2018 Singapore World Metrology Day 2018 1 Agenda 1. TÜV Rheinland: a Certification Body
More informationLiving with World Heritage in Africa
INTERNATIONAL CONFERENCE Living with World Heritage in Africa [26 26-29 September 2012] South Africa BACKGROUND DOCUMENT The Government of the Republic of South Africa, in collaboration with the African
More information[Docket No. FAA ; Directorate Identifier 2012-NM-176-AD] Airworthiness Directives; DASSAULT AVIATION Airplanes
This document is scheduled to be published in the Federal Register on 05/21/2013 and available online at http://federalregister.gov/a/2013-12077, and on FDsys.gov [4910-13-P] DEPARTMENT OF TRANSPORTATION
More informationINSTRUCTIONS FOR CONTINUED AIRWORTHINESS
1951 E. Airport Dr. Tucson, AZ 85706 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS CARBON MONOXIDE DETECTOR MODEL 452 INSTALLATION FOR CESSNA MODEL 172 AIRCRAFT STC NO: ST9261LA-A RECORD OF REVISIONS No. Revision
More informationInvestor Event November 2003
Investor Event November 2003 1 Gerry Murphy CEO 2 Ian Harding Director of Communications 3 Today s agenda Castorama Brico depot 12:15 - Lunch Atrium B&Q Asia 14:00 Store visits 19:30 - Aperitifs 20:00
More informationBUSINESS PLAN. CEN/TC 242 Safety requirements for cableway installations designed to carry persons EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 242 Safety requirements for cableway installations designed to carry persons Business Environment EXECUTIVE SUMMARY Safety requirements for cableway installations designed
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationWELCOME TO HYDERABAD
WELCOME TO HYDERABAD Dear all With bright prospectus of India becoming one of the three largest Aviation market in the world by 2020 with consequent phenomenal increase in air traffic, all the airports
More informationTechnical Paper. Functional Safety Update IEC Edition 2 Standards Update
Technical Paper Functional Safety Update IEC 61511 Edition 2 Standards Update Functional Safety Update Table of Contents 1.0 Introduction 2.0 IEC 61511-1 changes 3.0 IEC 61511-2 changes 4.0 IEC 61511-3
More informationIMO DEVELOPMENT OF MODEL PROCEDURE FOR EXECUTING SHIPBOARD EMERGENCY MEASURES. Fire-fighting drills. Submitted by the Republic of Korea
INTERNATIONAL MARITIME ORGANIZATION E IMO SUB-COMMITTEE ON STANDARDS OF TRAINING AND WATCHKEEPING 41st session Agenda item 12 STW 41/12/1 9 October 2009 Original: ENGLISH DEVELOPMENT OF MODEL PROCEDURE
More informationAS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
More informationAircraft Heater Upgrade to I-Series
2900 Selma Highway Montgomery, AL 36108 USA Tel: 334-386-5400 Fax: 334-386-5450 Aircraft Heater Upgrade to I-Series This page transmits the revision of Service Bulletin A-101 Rev. F, to Service Bulletin
More informationManagement Standard: Fire Safety
OHSS: H&S Management 201 Fire Safety Management : Fire Safety 1. Legal framework This standard is produced to comply with the following legislation in respect to fire safety: 1.1. Regulatory Reform (Fire
More informationLYHA Fire Safety Policy
LYHA Fire Safety Policy Introduction This Fire Safety Policy shows our approach to Fire Safety in the work place and in our homes. It identifies our approach to Fire Safety in: The workplace Flats with
More informationBUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated
More informationINSTRUCTIONS FOR CONTINUED AIRWORTHINESS
Doc. # ICA-55 REV ORig. 1951 E. Airport Dr. Tucson, AZ 85756 Document No. ICA-55-301 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS DISPLAY MODEL 55 INSTALLATION RECORD OF REVISIONS No. Revision Inserted Date
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationBUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous
More informationCOMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT, THE COUNCIL, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS
EUROPEAN COMMISSION Strasbourg, 25.10.2016 COM(2016) 710 final ANNEX 5 ANNEX to the COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT, THE COUNCIL, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE
More informationCouncil of the European Union Brussels, 21 March 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union
Council of the European Union Brussels, 21 March 2017 (OR. en) 7528/17 COVER NOTE From: date of receipt: 20 March 2017 To: No. Cion doc.: Subject: MI 257 ENT 75 COMPET 200 DELACT 54 Secretary-General of
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More informationNOTTINGHAM CITY HOMES
APPENDIX 1 NOTTINGHAM CITY HOMES FIRE SAFETY POLICY 2013/14 Draft for Board Uncontrolled when printed Page 1 of 14 DOCUMENT CONTROL Identification and Approval Status Document Title: Nottingham City Homes
More informationChapter 4 Availability of International E-waste Statistics
Chapter 4 Availability of International E-waste Statistics At the international level, monitoring of e-waste quantities is essential to track developments, set and monitor targets, and identify policies.
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationCOMPETENCE. Lead Fire Warden. Standard Title Lead Fire Warden Competence Assessment Standard Lead Fire Warden Competence Assessment Standard
Lead Fire Warden COMPETENCE CRO EMERGENCY RESPONSE COMPETENCE ASSESMENT Standard Title Code Lead Fire Warden Competence Assessment Standard 4502 Revision 0 (28th October 2016) Page 1 of 29 OPITO STANDARDS
More informationGASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
More informationHazLoc Essential Guides:
HazLoc Essential Guides: Intertek Deeside Lane, Chester, CH1 6DD UK hazloc@intertek.com +44 1244 882590 www.intertek-hazloc.com Contents Contents... 1 Introduction... 1 Introduction to Ex... 1 ATEX Overview...
More informationCircuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E001 Circuit Breakers JANUARY 2013 The electronic pdf version
More information7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.
Rev. 1 03/05/2015 ANNEX A to the Yokogawa Corporation of America Quality Assurance Manual For Additional Requirements selectively applied to ATEX and IECEx certified products CONTENTS 1. Scope 2. Purpose
More informationFunctional Safety of Machinery Presented by Greg Richards Manufacturing in America 02/22-23/2017
Functional Safety of Machinery Presented by Greg Richards Manufacturing in America 02/22-23/2017 AGENDA Definition of Safety? Machinery Safety Standards Comparison of ISO 13849-1 and IEC 62061 Safety-related
More informationBUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
More informationCooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
More informationBUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices
Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,
More informationFire Safety Policy. Contents. This policy was approved by the Trustees on 6 September 2018 and will be reviewed not later than every 5 years.
Fire Safety Policy This policy was approved by the Trustees on 6 September 2018 and will be reviewed not later than every 5 years. Contents 1. Policy principles 2 2. Statutory and Regulatory Framework
More informationNational Certificate in Passive Fire Protection (Routine Inspections) (Level 3) Level 3
NZQF NQ Ref 1568 Version 2 Page 1 of 5 National Certificate in Passive Fire Protection (Routine Inspections) (Level 3) Level 3 Credits 45 This qualification has been reviewed. The last date to meet the
More informationInvestigation Report
Bundesstelle für Flugunfalluntersuchung German Federal Bureau of Aircraft Accident Investigation Investigation Report Identification Type of Occurrence: Serious incident Date: 15 August 2011 Location:
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationE-WASTE POLICY & REGULATIONS. Dr Lakshmi Raghupathy GIZ
E-WASTE POLICY & REGULATIONS Dr Lakshmi Raghupathy GIZ -WASTE POLICY & REGULATIONS EU SWITCH ASIA Project Title: Establishing E-waste Channels to Enhance Environment Friendly Recycling Locations: Bangalore,
More informationGALA Workshop: Discover Eliava Market
GALA Workshop: Discover Eliava Market 22/23 January 2015 Location: Tbilisi, Georgia Organization responsible for the activity: GeoAIR GeoAIR participated in both activities of the GALA project: organized
More informationNational Certificate in Fire and Rescue Services (Vegetation) (Level 2)
NZQF NQ Ref 0539 Version 5 Page 1 of 7 National Certificate in Fire and Rescue Services (Vegetation) (Level 2) Level 2 Credits 42 This qualification is expiring. The last date to meet the requirements
More informationThe new Gas Appliances Regulation (EU) 2016/426
The new Gas Appliances Regulation (EU) 2016/426 Background and overview A Whitepaper What is happening? As of 21 April 2018, the Gas Appliances Directive 2009/142/EC (GAD) will be replaced by the new Gas
More informationAS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements
AS/NZS 60335.1:2011 (IEC 60335-1, Ed 5.2:2016, MOD) Incorporating Amendment No. 1, 2, 3 and 4 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 1: General requirements
More informationAustralian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529
AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures
More informationRecord of Amendments. Version Date Amendment Section/page affected
Industry support for effective compliance BTHA Guidance - The Low Voltage Directive (LVD) Directive 2014/35/EU On the harmonisation of the laws of the Member States relating to the making available on
More informationRoad Safety Impact Assessment
Road Safety Impact Assessment October 2016 TRANSPORT INFRASTRUCTURE IRELAND (TII) PUBLICATIONS About TII Transport Infrastructure Ireland (TII) is responsible for managing and improving the country s national
More informationReplace Light Imaging Detection and Ranging by Light Detection and Ranging
Proposed CM-AS-006 Issue 01 Certification of airborne systems using Light Amplification by Stimulated Emission of Radiation (LASER) with high energy Comment Response Document response 1 Deutsches Zentrum
More informationPROCEDURES FOR APPROVAL OF LIFE-SAVING APPLIANCES AND FIRE SAFETY SYSTEMS, EQUIPMENT AND PRODUCTS
(05/2011) PROCEDURES FOR APPROVAL OF LIFE-SAVING APPLIANCES AND FIRE SAFETY SYSTEMS, EQUIPMENT AND PRODUCTS 3rd EDITION May 2011 Responsible Authority The Design, Equipment and Boating Safety Branch is
More informationCEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities
More informationType 5 Certifications:
: What are they and how do you use them for compliance? Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com Contents Contents... 1 Introduction... 1
More informationRBGE Certificate in Practical Horticulture (CPH) Applicants Handbook
RBGE Certificate in Practical Horticulture (CPH) Applicants Handbook 2012-13 Contents 1. Course Overview 3 2. Course Structure and Dates 4 2.1 Course at Royal Botanic Garden Edinburgh 4 2.2 Course at Benmore
More informationNational Certificate in Fire Detection and Alarm Systems (Testing) (Level 3) Level 3
NZQF NQ Ref 0862 Version 4 Page 1 of 7 National Certificate in Fire Detection and Alarm Systems (Testing) (Level 3) Level 3 Credits 107 This qualification is has been reviewed. The last date to meet the
More information