VFA6-HD TOLERANCE NOTES CEK 1/25/2017 VFA6-HD CUSTOMER BMC 12/13/2017 6' HEAVY DUTY V-FRAME ASSEMBLY WITH TWO STIFF ARMS 1 OF 5 PARTS LIST
|
|
- Bethany Rogers
- 5 years ago
- Views:
Transcription
1 ITEM QTY X-VFAW X-HDCAMTBW X-MHTPHD X-VFAPL X-LCBP X-HDCAMSS X-SPTB X-HDCAMSP X-TBCA SC MCP DCP P P6 A GFW GLW GNUT GR- GR- GR- X-UB0 X-UB G07 G06 G0 A G0 GFW GLW GNUT X-UB0 X-UB GFW GLW GNUT PARTS LIST PART SUPPORT ARM CLAMP WELDMENT FOR BCAM-HD MULTI-HOLE TAPER PLATE WELDMENT VFA-HD PIVOT PLATE BENT BACKING PLATE ANGLE ADJUSTMENT WELDMENT FOR BCAM-HD SLIDING PIPE TIE BACK PLATE POSITIONING PLATE WELDMENT FOR BCAM-HD TIE BACK CLIP ANGLE CROSSOVER PLATE CLAMP HALF /" THICK, -/" LONG /" THICK, -/" CNTER TO CENTER CLAMP HALF -7/" X " ( /" SCH. 0) GALVANIZED PIPE -/" X 6" (" SCH. 0) GALVANIZED PIPE /" x -/" UNC HEX BOLT (A) /" HDG USS FLATWASHER /" HDG LOCKWASHER /'' HDG HEAVY H HEX NUT /" x " THREADED ROD (HDG.) /" x " THREADED ROD (HDG.) /" x " THREADED ROD (HDG.) /" X " X -/" X -/" U-BOLT (HDG.) /" X -/" X -/" X " U-BOLT (HDG.) /'' x 7" HDG HEX BOLT GR FULL THREAD /'' x 6" HDG HEX BOLT GR FULL THREAD /" x " HDG HEX BOLT GR /'' x -/" HDG A HEX BOLT /" x " HDG HEX BOLT GR /" HDG USS FLATWASHER /" HDG LOCKWASHER /'' HDG HEAVY H HEX NUT /" X " X X " GALV U-BOLT /" X " X " X -/" U-BOLT (HDG.) /" HDG USS FLATWASHER /" HDG LOCKWASHER /'' HDG HEAVY H HEX NUT LENGTH in in / in 7 in /6 in / in in 6 in / in in 7 in 6 in / in / in / in / in UNIT WT. NET WT TOTAL WT. # 69. D UPDATED BCAM VERSION TO BCAM VERSION 6/9/0 C UPDATED PIN LEG CONNECTION TO BCAM CONNECTION //07 B CHANGED TIE-BACK BACK CONNECTION 7/6/07 A CHANGED TIE-BACK FRONT CONNECTION //07 SAWED, SHEARED AND GAS CUT EDGES (± 0.0") DRILLED AND GAS CUT HOLES (± 0.0") - NO CONING OF HOLES LASER CUT EDGES AND HOLES (± 0.00") - NO CONING OF HOLES BENDS ARE ± / DEGREE ALL OTHER MACHINING (± 0.0") 0 //07 BMC // OF
2 TIE-BACK POSITIONS TIE-BACK POSITION -0 / +0 TOP PARALLEL TIE-BACK POSITION -0 / -0 TOP CROSS TIE-BACK POSITION -0 SAME SIDE STACKED D UPDATED BCAM VERSION TO BCAM VERSION 6/9/0 C UPDATED PIN LEG CONNECTION TO BCAM CONNECTION //07 B CHANGED TIE-BACK BACK CONNECTION 7/6/07 A CHANGED TIE-BACK FRONT CONNECTION //07 SAWED, SHEARED AND GAS CUT EDGES (± 0.0") DRILLED AND GAS CUT HOLES (± 0.0") - NO CONING OF HOLES LASER CUT EDGES AND HOLES (± 0.00") - NO CONING OF HOLES BENDS ARE ± / DEGREE ALL OTHER MACHINING (± 0.0") 0 //07 BMC // OF
3 ANGLE CALIBRATING PROCEDURE: MEASURE TOWER TAPER AND PICK LOWER BRACKET HOLE: HOLE A = -.6 TO.6 HOLE B =.6 TO 6.. USE CALIBRATING BOLT TO ADJUST FRAME TO DESIRED TAPER STEP STEP FITS LEG SIZES UP TO -/" O.D. 0 /" ± TAPER ADJUSTMENT. TORQUE LOCKING BOLTS TO 00 ft.-lbs.. ADVANCE LOCKING NUT TO POSITIONING PLATE, THEN TIGHTEN. UPPER 7/" B 7" ± B A A LOWER.6 to to.6 0" VARIABLE D UPDATED BCAM VERSION TO BCAM VERSION 6/9/0 C UPDATED PIN LEG CONNECTION TO BCAM CONNECTION //07 B CHANGED TIE-BACK BACK CONNECTION 7/6/07 A CHANGED TIE-BACK FRONT CONNECTION //07 SAWED, SHEARED AND GAS CUT EDGES (± 0.0") DRILLED AND GAS CUT HOLES (± 0.0") - NO CONING OF HOLES LASER CUT EDGES AND HOLES (± 0.00") - NO CONING OF HOLES BENDS ARE ± / DEGREE ALL OTHER MACHINING (± 0.0") 0 //07 BMC // OF
4 OR 9 6 OR 0 OR B F D A OR DETAIL A DETAIL B C G E DETAIL C DETAIL D 9 9 X 7/6" LUG HOLES REVIEW CARRIER STANDARDS FOR PROPER SURFACE PREPARTION AND ASSEMBLY OF ELECTRICAL CONNECTIONS DETAIL G 9/6" SLOTTED HOLE FOR EQUIPMENT PIPE U-BOLT DETAIL E 9 DETAIL F D UPDATED BCAM VERSION TO BCAM VERSION 6/9/0 C UPDATED PIN LEG CONNECTION TO BCAM CONNECTION //07 B CHANGED TIE-BACK BACK CONNECTION 7/6/07 A CHANGED TIE-BACK FRONT CONNECTION //07 SAWED, SHEARED AND GAS CUT EDGES (± 0.0") DRILLED AND GAS CUT HOLES (± 0.0") - NO CONING OF HOLES LASER CUT EDGES AND HOLES (± 0.00") - NO CONING OF HOLES BENDS ARE ± / DEGREE ALL OTHER MACHINING (± 0.0") 0 //07 BMC // OF
5 UNISTRUT AND HARDWARE SOLD SEPARATELY. REQUIRES /" HARDWARE D UPDATED BCAM VERSION TO BCAM VERSION 6/9/0 C UPDATED PIN LEG CONNECTION TO BCAM CONNECTION //07 B CHANGED TIE-BACK BACK CONNECTION 7/6/07 A CHANGED TIE-BACK FRONT CONNECTION //07 SAWED, SHEARED AND GAS CUT EDGES (± 0.0") DRILLED AND GAS CUT HOLES (± 0.0") - NO CONING OF HOLES LASER CUT EDGES AND HOLES (± 0.00") - NO CONING OF HOLES BENDS ARE ± / DEGREE ALL OTHER MACHINING (± 0.0") 0 //07 EQUIPMENT PIPE AND HARDWARE SOLD SEPARATELY. REQUIRES /" HARDWARE AND -/" TO -/" O.D. PIPE BMC // OF
TC 222 TIRE CHANGER SPARE PART LIST 01
TC 222 TIRE CHANGER SPARE PART LIST 0 No. on Part No. Name Qua. Spec. 699000736 Vertical arm 2 699000737 Hex shaft, vertical arm 3A 699000725 Assembly - locking cylinder 4 699000738 Lock plate horizontal
More informationPRESSURE-SIDE CHEMICAL INDUCTOR
INSTALLATION INSTRUCTIONS PRESSURE-SIDE CHEMICAL INDUCTOR FOR TA00 & TA550 SPRAYER TANKS Alliance Product Group P.O. Box 357 Kalida, OH 45853 PH: 49-53-3 FAX: 49-53-468 www.allianceag.com 40909 GENERAL
More informationPole Mounting System Installation & Certification Manual
Pole Mounting System Installation & Certification Manual IronRidge Pole Mount Installation Guide... 2 IronRidge Certification Letter... 11 IronRidge Wet Stamped Drawing... 12 www.ironridge.com 800-227-9523
More informationType 300 Series Bench Electrode Stabilization Ovens
REPAIR PARTS INSTALLATION INSTRUCTIONS Type 300 Series Bench Electrode Stabilization Ovens *Please read all instructions, paying special attention to all cautions or warnings, before beginning any repairs.
More information391 WEST WATER STREET TAUNTON, MA P: F:
391 WEST WATER STREET TAUNTON, MA 02780 WWW.QUICK-SLING.COM INFO@QUICK-SLING.COM P: 1.800.699.0453 F: 1.800.699.0423 QUICK-SLING MINI-SPLIT STANDS QSMS1200 QSMS1201 QSMS1800 QSMS1801 QSMS2400 QSMS2401
More informationProStar Ceiling Fan PS52. Installation Instructions Instrucciones de instalación Instructions d installation
ProStar Ceiling Fan PS52 Installation Instructions Instrucciones de instalación Instructions d installation Read and Save These Safety Precautions. Turn off electricity at main switch before wiring or
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 190331 Frame Assembly w/plugs 02 180741 Bracket, Axle, Trailer 03 180751 Axle, Trailer 04 180641 Washer,.8" ID, 1.5"
More informationSECAP Conveyor TC72 / Dryer TD72
SECAP Conveyor TC72 / Dryer TD72 4/08 Assembly, Operation & Parts Manual Second Edition TABLE OF CONTENTS SPECIFICATIONS UNPACKING ASSEMBLY 2 SETUP & OPERATION ELECTRICAL SCHEMATIC 8 CONVEYOR PARTS 9 OPTIONAL
More information36"x17" Portable Tool Chest and 6-Drawer Tool Cabinet
36"x17" Portable Tool Chest and 6-Drawer Tool Cabinet CHEST 24571 CABINET 24572 CAUTION: 1. Read and follow all safety information and instructions before using this product for the first time. 2. Fill
More informationParts Manual. Floor Type Electric Convection Steamer. Series: Classic Electric Boiler Base Steamer East 179 th Street Cleveland, Ohio 44110
Parts Manual Floor Type Electric Convection Steamer Series: Classic Electric Boiler Base Steamer 1333 East 179 th Street Cleveland, Ohio 44110 Phone: (216) 481-4900 1-800-338-2204 Fax: (216) 481-3782 www.clevelandrange.com
More informationNOTICE: The information contained on the following page(s) was produced prior to May 1, On that date Reznor became part of Nortek, Inc.
NOTICE: The information contained on the following page(s) was produced prior to May 1, 2014. On that date Reznor became part of Nortek, Inc. References to any other company affiliations are no longer
More informationUMA-1020 Light Weight Suspended Ceiling Kit
INSTALLATION INSTRUCTIONS UMA-1020 Light Weight Suspended Ceiling Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products weighing less than 50 pounds) when installing
More informationM5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual
M5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual Introduction..3 Safety Precautions 4 Installation Instructions 5 Electrical Connections..7 Operating Instructions..8 Maintenance Procedures...8 Parts
More informationDESA INTERNATIONAL VENT-FREE PROPANE/LP GAS STOVE HEATER
LO HI ON PILOT LO HI ON PILOT DESA INTERNATIONAL VENT-FREE PROPANE/LP GAS STOVE HEATER ILLUSTRATED PARTS BREAKDOWN SVYD18PR FSVYD18PR 1 2 6 9 3 7 4 8 9 11 12 21 10 13 OFF 1 17 22 14 16 17 18 19 OFF 12
More informationAcrylic Claw Foot Tub
Acrylic Claw Foot Tub Wrench or socket Drill & Bits Parts Recommended 2-2 x12 boards 4 Lag Bolts 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2-2 x12 s securely fastened
More informationMTC-Series Manual Trash Compactors Instruction Manual
Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Website: www.vestilmfg.com e-mail: info@vestil.com
More informationHakki Pilke Raven spare parts manual
1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section
More informationInstallation Instructions for SHD Series Drawers
Installation Instructions for SHD Series Drawers CHECK FOR CONCEALED DAMAGE FILE CLAIM WITH DELIVERING FREIGHT CARRIER Drawers manufactured by ADVANCE TABCO are designed and constructed for storage. Applications
More informationHustler Z Bac Vac Parts Manual ,
Hustler Z Bac Vac Parts Manual 967, 988 Hustler Turf Equipment P.O. Box 7000 Hesston, Kansas 6706-097 t- 56 06/08 Table of Contents Chapter General Information.................................... - Chapter
More informationExploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base
22 Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base Parts List - Model J-7020M/J-7040M Miter Cut-off Saw Base 1 J-5507591 Base, Machine 1 1-1 5512197 Plug, Drain (3/8in, PT) 2 5507592 Screw,
More informationCHALLENGER 1 COOLING UNITS
COOLING UNITS PART NO. 284463200 2844632000 284464200 2844642000 284465200 2844652000 46343000 463430000 of 6 Control Code A ªIMI Cornelius Co., 972-2000 COOLING UNIT 6 2 7 0 26 2 3 22 34 8 9 3 9 2 4 5
More informationMNEFDD54 & MNBCDD54 GALVANIZED WALL FANS Installation, Operation, and Maintenance Instructions
FARM PRODUCTS DIVISION MEMBER OF AMCA AMERICAN COOLAIR CORPORATION P.O. BOX 2300 JACKSONVILLE, FLORIDA 32203 PHONE (904) 389-3646 FAX (904) 387-3449 E-MAIL - fans@coolair.com MNEFDD54 & MNBCDD54 GALVANIZED
More informationSpare Parts List (Kits) Model Ref.:- HM35 SERIES A Spare Parts List (Kits) Issue 8 Dated 10-February-2015 Reference Drawing 09-1108-0000 Issue B Dated 07-January 2014 Drawing Ref. Part Number DESCRIPTION
More informationAir-Cooled Fluid Cooling Units (P/N E R2)
Fluid Cooler Series Air-Cooled Fluid Cooling Units Operating and Installation Manual Air-Cooled Fluid Cooling Units (P/N E208134 R2) TABLE OF CONTENTS 1 RECEIPT OF EQUIPMENT 3 1.1 INSPECTION 3 1.2 LOSS
More informationPentz EF5 Installation Guide
Pentz EF5 Installation Guide Clear Vue Cyclones 145 Nix Road Liberty, SC 29657 888-299-0221 www.clearvuecyclones.com Disclaimers & Warnings WARNING: All persons, by purchasing a motorized dust collection
More informationTS-49 PART # DPEC DATE: REVISED:
36-6022 COMPACT PORTABLE TABLE SAW - w/mobile STAND 38 73 325 176 x2 x4 x2 324 326 323 x2 P1 36-6022 COMPACT PORTABLE TABLE SAW - w/mobile STAND 116 191 P2 36-6022 COMPACT PORTABLE TABLE SAW - w/mobile
More informationDeluxe Welding Tool Chest
Deluxe Welding Tool Chest Item# 9002166 OPERATOR S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS LXGe SERIES GLASSWASHERS ML-130255 ML-130256 ML-130257 ML-130258 LXGePR (Cold) LXGeR (Hot) A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43304 Rev. A (May
More informationSUBCOURSE EDITION EN US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV)
SUBCOURSE EDITION EN5113 5 US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV) US ARMY PLUMBER MOS 51K SKILL LEVELS 1 AND 2 COURSE PLUMBING FIXTURES (PLUMBING IV) SUBCOURSE NO. EN5113 US Army Engineer
More informationInstallation Manual Universal Single-Arm Side-of-Pole Mount UNI-SA/21.5
Installation Manual Universal Single-Arm Side-of-Pole Mount UNI-SA/21.5 Solar Mounting Solutions UNI-SA/21.5 March 2009 www.ironridge.com 2009 IronRidge, Inc. All Rights Reserved Version 2.0 2 Universal
More informationCARRIER MIRACOOL SERVICE PARTS LIST MC260 AND MC300 ALL MODELS
CARRIER MIRACOOL SERVICE PARTS LIST MC260 AND MC300 ALL MODELS 260L/300L SALES OFFICE: P.O. BOX 5932 SPARTANBURG, S.C. 29304-5932 PHONE: (864) 582-8 TOLL FREE -800-845-9800 TECHNICAL SERVICE: -800-684-99,
More informationASTRO ENVELOPE FEEDER AMC FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000-17 FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 180721 Frame Assembly 02 188671 Bushing, 1.02" ID x 1.25" OD x.75l 03 188781 Support, Axle, 1" 04 188381 Plate, Axle
More informationAn ibuy Stores Company
REVISED STARTING SERIAL NO. 060604 PARTS MANUAL Model SK-4 4 DOWNCUT CONCRETE/ASPHALT WALK BEHIND SAWS SKU NO. MODEL POWER OPTION 45400D SK4-9H HONDA ENGINE 9 HP GX0 45600D SK4-H HONDA ENGINE HP GX40 4800D
More informationST. KITTS CEILING FAN
ITEM #0845047 ST. KITTS CEILING FAN MODEL #40829 Questions, problems or missing parts? Before returning this item to your retailer, call our customer service department at 1-800-643-0067, Monday - Thursday,
More informationWARNING DESCRIPTION PART NUMBER QTY PLUMBING, DYNATEMP DRAIN QUENCH BRACKET, THERMOSTAT DRAIN QUENCH
! WARNING WARNING: This kit should be installed only by qualified service personnel to reduce the risk of electric shock, serious injury, or fire. A plumbing permit and the services of a licensed plumber
More information600 Floor Stripper Applicator
600 Floor Stripper Applicator Operator and Parts Manual Model Part No.: 60763 www.tennantco.com 607624 Rev. 0 (08-2007) *607624* OPERATION This manual is furnished with each new model. It provides necessary
More informationMotor/Frame Assembly. Drain Cleaning Machine K Position Fan as Shown. Fan Mounting Detail
Drain Cleaning Machine K-0 Motor/Frame Assembly 0 0. Position Fan as Shown. Fan Mounting Detail Frame Assembly 0 Screw #0 - () Rubber Foot () 0 Carriage Bolt /" - x /" Flange Bearing () 0 Bracket 0 /"
More informationIndustrial Cable Support HALOGEN-FREE - FIRE RETARDANT - OPTICAL FIBER DUCTING
INTRODUCTION Duct+Lid () TC1279-21X Ducting Warren & Brown Technologies Optical Fibre Ducting System is designed to ensure network integrity and to satisfy the requirements for Optical Fibre stress relief:
More informationMade in the USA. The front and rear cover of each fan is anodized. This electrochemical process protects aluminum parts from corrosion and oxida on.
Vacuum Fans A 3 diameter fan assembly is a replacement part for Vactor machines. These fans are constructed to meet exact dimensional speciþ caon and each part in the fan assembly is coated with a protectant
More informationProduct Support Bulletin
MODEL: SUBJECT: CONVENTIONAL, W/ C7 CAT ENGINE WEBASTO TSL-17 HEATER Body DATE: APRIL 13, 2004 INDEX: 6 PAGE: 1 OF 16 Before you start this procedure, perform Freightliner Service Bulletin #20-7 first.
More informationINSTRUCTION MANUAL with Replacement Parts
INSTRUCTION MANUAL with Replacement Parts MODEL FD500 FOOD WASTE DISPOSERS (INCLUDES MOTOR PARTS) ML-18978 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 11394 Rev. G (10-98)
More informationMK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-00 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space
More informationFly / Rear Deltoid. Owners Manual
Owners Manual . Assembly Instructions Item Qty Description Part Number Item Qty Description Part Number Front Upright AAP04-0746 (WHT)(PLT) 7 Weight Stack Pin P-0048 Tower AP04-0745 (WHT)(PLT) 8 Center
More informationCMA-440 Light Weight Suspended Ceiling Kit
INSTALLATION INSTRUCTIONS CMA-440 Light Weight Suspended Ceiling Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products weighing less than 50 pounds) when installing
More informationWARNING. Failure to install this kit within the guidelines might adversely affect safety, performance, component life and warranty coverage.
! WARNING WARNING: This kit should be installed only by qualified service personnel to reduce the risk of electric shock, serious injury, or fire. A plumbing permit and the services of a licensed plumber
More informationOwner s Instruction and Parts Manual for Sukup Fastir and Fastir Plus Units
Owner s Instruction and Parts Manual for Sukup Fastir and Fastir Plus Units Sukup Manufacturing Co. 1555 255th Street, Box 677 Sheffield, Iowa, USA 50475-0677 Phone: 641-892-4222 Fax: 641-892-4629 Website:
More informationService Parts Manual Integrated (700-(
Service Parts Manual Integrated (700-( 700BF/I- DRAWER VIEW PARTS LIST Ref # Part # Description 0000 Screw, #-5 x /" Truss HD 00 Tube Clamp, Steel, 3/" 3 000 Channel, Wire 7.5" 0070 Screw, #- x / PH Truss
More informationDrain Cleaning Machine K-39
Drain Cleaning Machine K- 0 A- AUTOFEED Cable Chuck Pan Head Screw #0 - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () See Service Notes 0 Spacer Clips () Gasket Drum Front
More informationCATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN HSROG ML-111148 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43003 (June 2001) HOT SECTION 26 OVEN TOP SECTION
More informationOperator s Manual. Stripping Solution Applicator
Operator s Manual Stripping Solution Applicator Record this Important Information Date of Purchase Purchased From Address City State Zip Phone Contact Serial Number Emergency Contacts Medical Emergency
More informationMopar B-Body Condenser Kit with Drier
an ISO 900:2008 Registered Company 966-70 Mopar B-Body Condenser Kit with Drier 05066 Fits: Plymouth: Belvedere, Satellite, Road Runner, GTX Dodge: Charger (Except 966-67), Coronet, Super Bee 8865 Goll
More informationConcepts Serving Systems
Concepts Serving Systems Installation Manual Please read this manual completely before attempting to install or operate this equipment! Notify carrier of damage! Inspect all components immediately. February
More informationwholesalesolar.com Table of Contents 1. Racking Layout Options (page 2-3) 2. IronRidge Roof Mounting System (page 4-12)
wholesalesolar.com Table of Contents 1. Racking Layout Options (page 2-3) 2. IronRidge Roof Mounting System (page 4-12) 3. WEEB Installation Instructions (page 13-24) Page 1 RACKING LAYOUT OPTIONS MID
More information454 INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) FUEL INJECTION PUMP, BOSCH INJECTION C.R. PUMP
454 INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) 12-80 FUEL INJECTION PUMP, BOSCH INJECTION C.R. PUMP Page 1 of 5 454 INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) 12-80 FUEL INJECTION PUMP,
More informationOP44-1 REV 2: Removed depiction of air intake hole in the CB-907A Right Aft Case Baffle.
REVISION DESCRIPTION: OP44-1 REV 2: Removed depiction of air intake hole in the CB-907A Right Aft Case Baffle. OP44-4 REV 1: Steps rewritten to describe the air intake hole on the CB-907A Right Aft Case
More information99105A Series - F Brush Lift Assembly Model :99105A 20" EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F
9905A Series - F Brush Lift Assembly Model :9905A 0" EZ BD Floorkeeper (w/ - V Batteries) - Series F Page- 5 7 8 9 5 7 8 0 5 7 8 9 0 5 7 8 9 0 0589 NUT, LOCK W/ LOCTITE 070 RING, RETAINING 0 WASHER, PLAIN
More information2 Installation Instructions For Vari-Fan Ceiling Fans Installation Instructions For Vari-Fan Ceiling Fans 11
Installation Instructions For Installation Instructions For Vari-Fan Ceiling Fans Vari-Fan Ceiling Fans Installation Instructions For Vari-Fan Ceiling Fans Vari-Fan Ceiling Fans DC powered fans designed
More informationInstallation Instructions Part No , Part No Part No
Torsion-Flex Motor mount for PSC motors and Rigid-Mount for ECM motors Replacement Kit Cancels: New Installation Instructions Part No. 327752-401, Part No. 327753-401 Part No. 327754-401 IIK-310A-45-11
More informationUHIR Series. Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater. Owner s Manual
UHIR Series Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater Owner s Manual This manual covers installation, maintenance and repair parts. Read carefully before attempting to
More informationFor more Parts Information:
For more Parts Information: https://manitowocfsg.sysonline.com/default.aspx TABLE OF CONTENTS Manitowoc Foodservice [Updated: Sep. 30, 2013] Manitowoc - Ice & Related Parts Catalog Ice Machine Q Series
More information52 SAN LUCAS CEILING FAN
52 SAN LUCAS CEILING FAN Owner s Manual Models #20551 If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-459-3267, 9 a.m.-
More information60" Tulle PatioTM. Instruction Manual. A Kichler Select ceiling fan
60" Tulle PatioTM A Kichler Select ceiling fan cul Certified for Wet Location Kichler Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Customer Service 866.558.5706 8:30
More informationEcoBrite Smooth Light LED Light Fixtures
Installation Guide EcoBrite Smooth Light LED Light Fixtures BEFORE YOU BEGIN INSTALLATION Read these instructions carefully. Failure to follow these instructions will invalidate the warranty on this product
More information24 & 30 Quiet Design Oscillating Wall Mount Fan
Operating Instructions & Parts Manual Models: 99538, 99539 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationFord Falcon, Ranchero Condenser Kit with Drier (014150)
an ISO 900:2008 Registered Company 964-65 Ford Falcon, Ranchero Condenser Kit with Drier (0450) 8865 Goll St. San Antonio, TX 78266 Phone: 20-654-77 Fax: 20-654-33 www.vintageair.com 903250 REV A 06/23/5,
More informationInstallation Manual Universal Side-of-Pole Mount UNI-SP/02A
Installation Manual Universal Side-of-Pole Mount UNI-SP/02A Solar Mounting Solutions UNI-SP/02A September 2009 www.ironridge.com 2009 IronRidge, Inc. All Rights Reserved Version 2.1 2 Universal Side-of-Pole
More informationInstallation Manual Universal Side-of-Pole Mount UNI-SP/01A
Installation Manual Universal Side-of-Pole Mount UNI-SP/01A YOUR IRONRIDGE DISTRIBUTOR SOLIGENT 800-967-6917 www.soligent.net Solar Mounting Solutions UNI-SP/01A April 2008 www.ironridge.com 2008 IronRidge,
More informationFRL 10 Centrifugal blowers
FRL 10 Centrifugal blowers User instructions 2 Kongskilde Blower model FRL10. Motor mounting instructions Motor Specifications: Model FRL 10 Blower/Aspirator fans are designed to be driven by Single or
More informationVari-Cyclone Ceiling Fans
Installation Instructions For Vari-Cyclone Ceiling Fans Installation Instructions For Vari-Cyclone Ceiling Fans Vari-Cyclone Ceiling Fans DC powered fans designed to operate on 12 or 24 vdc only! Toll
More informationMODELS: TJ45 TJ90 Operator s Manual
ICE DISPENSER MODELS: TJ45 TJ90 Operator s Manual Part No. 90614 Revision: H Revision Date: May 26, 2014 THIS DOCUMENT CONTAINS IMPORTANT INFORMATION This Manual must be read and understood before installing
More informationRepair Parts List DRYER MODEL NUMBER MDG32PC3AW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG32PC3AW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
More informationEX20. Parts List Models: (100C) (cold), (100H) (heated), (100SC) (single cord, heated) Form No /2015 REV A
EX0 Parts List Models: 560588 (00C) (cold), 560589 (00H) (heated), 560590 (00SC) (single cord, heated) Form No. 56065 5/05 REV A GENERAL VIEW Item Ref. No. Qty Description Base System Recovery System Solution
More information1. SAFETY RULES WARNING WARNING. 8. Avoid placing objects in the path of the blades.
1 1. SAFETY RULES 1. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National
More informationChevrolet Impala Condenser Kit with Drier (021062)
an ISO 900:2008 Registered Company 96-63 Chevrolet Impala Condenser Kit with Drier (02062) 8865 Goll St. San Antonio, TX 78266 Phone: 20-654-77 Fax: 20-654-33 www.vintageair.com 90063 REV D 03/22/6, PG
More informationMODEL X-150D SUB-ASSEMBLY PARTS LIST REV. 02/27/04
MODEL X-D SUB-ASSEMBLY PARTS LIST REV. 0//0 MAINFRAME ASSEMBLY X-D DECO ITEM PART NUMBER DESCRIPTION QTY 0 --0-00 Mainframe, X ---00 Rollcage, X -0-00-0 HHB, /-0 x / -G0-0- HHB, /- x / -0-00-0 HHB, /-0
More informationINSTALLATION GUIDE DO NOT DISCARD THIS DOCUMENT: SAVE FOR FUTURE USE
INSTALLATION GUIDE DO NOT DISCARD THIS DOCUMENT: SAVE FOR FUTURE USE For Support Hours: M-F: 7:00amCST - 5:00pmCST or visit us at: 51512A July, 2016 p. 2 Pioneer Fan 8 /12 /16 /20 HVLS Fans Table of Contents
More informationPX Dual Sliding Doors, Installation Guide
s, 01 102.25 Bumper location inside header Header & Valance Legs (C-Channels, Width 3 ) Door Handles Bumper location inside header Floor Brackets 54" Installation Instructions: Step #1 Attach legs to valance
More informationBand Heaters W A T L O W. Special Mica Barrel and Nozzle
W A T L O W For over 80 years, Watlow has been solving complex and unique application problems with standard mica barrel and nozzle heaters. Watlow is continuously improving design and application knowledge
More informationMK-1605 Electric Concrete Saw EXPLODED VIEW & PARTS LIST
www.mkdiamond.com MK-0 Electric Concrete Saw EXPLODED VIEW & PARTS LIST MK-0B Premium Part# 8099 Revision 0 0.08 Manual Part# 79 Caution: Read all safety and operating instructions before using this equipment.
More informationMODEL 1308-C & 1308-N
Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 1308-C & 1308-N HEAT SEALER 1308S20000CV1 INDEX Section Description Document No. Page No. DESCRIPTION/SPECIFICATIONS
More informationEasy Dose Chemical Injection and Dispensing System DEMA Engineering Company
Easy Dose Chemical Injection and Dispensing System DEMA Engineering Company Overview The DEMA Easy Dose is a simple and reliable chemical delivery system. Easy Dose features an electronic control system
More informationOscillating Ceiling Fan
Oscillating Ceiling Fan model no. 052-8399-0 Toll-free 1-866-827-4985 IMPORTANT: For your safety please read and understand this manual before installing or operating this product. OWNER S MANUAL Toll
More informationModular Drawer Cabinets Installation Instructions
Modular Drawer Cabinets Installation Instructions IMPORTANT PRODUCT LIABILITY INFORMATION Read all instructions before proceeding with installation or drawer loading. Vital product information pertaining
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL TUBE AXIAL FANS BTA, WTA, HTA, DDA The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended
More informationMarley X7 Fan USER MANUAL DESIGNED FOR INDUCED-DRAFT COOLING TOWER APPLICATIONS
USER MANUAL Marley X7 Fan DESIGNED FOR INDUCED-DRAFT COOLING TOWER APPLICATIONS M2010-1234A ISSUED 3/2012 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. Fan Components 1
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 5000 700069 50055 MODEL: Dillon 5000 (RH-600) 50055 (RH-600X) 700069 (TRRH-600) REV D Restoration Hardware Faucet Product Size Specification Diagram Recommended Deck Hole Size
More informationCAD-BND. Tools Needed
CAD-BND installation instructions IMPORTANT! Before you begin, read these instructions completely and carefully. CAUTION: Some parts have sharp edges; care must be taken when handling the various components
More informationADG-531HS Hot Surface Ignition
ADG-531HS Hot Surface Ignition Parts Manual 1998 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9010 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com 120997JEV/abe
More informationLow-Intensity, Infrared Heating Systems Submittal: HE Series
Low-Intensity, Infrared Heating Systems Submittal: HE Series Job: Location: Engineer: Gas Specs: Date: QTY. MODEL NO. HE UNIT INPUT BTU/HR QTY. MODEL NO. HE UNIT INPUT BTU/HR QTY. MODEL NO. HE UNIT INPUT
More informationMODEL 6430T, 6460 & 6460T POTATO PEELER
MODEL 6430T, 6460 & 6460T POTATO PEELER MODEL ML-137602 6430T ML-19630 6460 ML-137604 6460T ML-104562 6460C ML-137606 6460CT 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 37005 (Apr. 2006) Installation,
More informationRepair Parts List STACKED DRYER MODEL NUMBER MLG32PDAWW. When requesting service or ordering parts, always provide the following information:
Repair Parts List STACKED DRYER MODEL NUMBER MLG32PDAWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description
More informationContinuous Flow Dryer Assembly Manual
Continuous Flow Dryer Assembly Manual Dryer Assembly Manual Sukup Manufacturing Company 1555-255th Street P.O. Box 677 Sheffield, Iowa 50475 Phone 641 892 4222 Fax 641 892 4629 Table of Contents Table
More informationINTRODUCTION. NOTE: Read the entire instruction manual before starting the installation. FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD
Installation Instructions NOTE: Read the entire instruction manual before starting the installation. SAFETY CONSIDERATIONS Improper installation, adjustment, alteration, service, maintenance, or use can
More informationARIN THERMOSTATIC SHOWER SYSTEM
ARIN THERMOSTATIC SHOWER SYSTEM INSTALLATION INSTRUCTIONS Before installing, read entire shower system installation instructions. Observe all local building and safety codes. For the following installation
More informationKawasaki Teryx Firestorm Heater Kit Instructions.
Please read all instructions before beginning installation. When working on cooling systems always allow vehicles to cool to avoid being burned or scalded by hot coolant. Always disconnect vehicle s negative
More informationFan Guard. Fan Guard ASSEMBLY INSTRUCTIONS FOR INDUCED DRAFT PRODUCTS
ASSEMBLY INSTRUCTIONS FOR INDUCED DRAFT PRODUCTS Fan guard(s) must be securely in place before operating the unit. Follow the fan guard installation instructions in this document to ensure that the fan
More informationThe Extraordinaire OWNER S MANUAL. Orbital Ceiling Fan. Model No. OF110** READ AND SAVE THESE INSTRUCTIONS. Net Weight 14.5 lbs. or 6.59 kg.
The Extraordinaire Orbital Fan WARNING: Support Directly From Building Structure Net Weight 14.5 lbs. or 6.59 kg. Model No. OF110** OWNER S MANUAL READ AND SAVE THESE INSTRUCTIONS Important Safety Instructions
More information! WARNING. Replacement Head Mechanism INSTRUCTION MANUAL MM-413F
INSTRUCTION MANUAL MM-413F Replacement Head Mechanism With Switch Assembly: 93-HD, 94-HD 93-M-HD, 94-M-HD 93-7B-HD, 94-7B-HD 93-7B-M-HD, 94-7B-M-HD Without Switch Assembly: 93-HDLS 94-HDLS Replacement
More informationSeries SFN Unbraided Flexible Hose Assemblies Series SFB Braided Flexible Hose Assemblies
Series SFN Unbraided Flexible Hose Assemblies Series SFB Braided Flexible Hose Assemblies SprinkFLEX Stainless Steel Sprinkler Fittings connect the branch line to the sprinkler using a flexible stainless
More information